[fedora-arm] u-boot 2014.10 GA on it's way to F-21

[Paul Whalen]

----- Original Message -----
> Works great for me! Thanks.
> 
> Does anyone have a beaglebone white? I'm still worried that this fix
> will break that board.

Works okay on the Beaglebone White using the F21 TC1 Minimal image. Hit 
a couple of errors at the beginning, but the system came up fine.

U-Boot SPL 2014.10 (Nov 11 2014 - 07:35:06)
No AC power, disabling frequency switch
MMC: block number 0x100 exceeds max(0x0)
MMC: block number 0x200 exceeds max(0x0)
*** Error - No Valid Environment Area found
Using default environment
...


Paul
 

> 
> 
> Adam
> 
> 
> On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson <pbrobinson at gmail.com> wrote:
> > Hi Adam,
> >
> > Problem should now be fixed with -5
> >
> > Can you test and provide karma so we can get it in GA.
> >
> > https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-2014.10-5.fc21
> >
> > On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam at spicenitz.org> wrote:
> >> This is still present with -3. It looks like this version of U-Boot is
> >> not capable of booting from the internal eMMC on beaglebone black.
> >>
> >> U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41)
> >> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
> >> spl: mmc init failed: err - -19
> >> ### ERROR ### Please RESET the board ###
> >>
> >>
> >> I found at least another thread about this issue, from version 2014.07:
> >> https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
> >>
> >>
> >> Adam
> >>
> >> On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson at gmail.com>
> >> wrote:
> >>> A minor bug and is fixed in uboot-tools-2014.10-3.fc21
> >>>
> >>> Peter
> >>>
> >>> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam at spicenitz.org> wrote:
> >>>> Hopefully I did something wrong, but it's not working at all for me on
> >>>> the beaglebone black:
> >>>>
> >>>> Here is what I get when I try to boot from eMMC:
> >>>>
> >>>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
> >>>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
> >>>> spl: mmc init failed: err - -19
> >>>> ### ERROR ### Please RESET the board ###
> >>>>
> >>>>
> >>>>
> >>>> Here is what I get when I make a new SD card from the latest minimal
> >>>> image:
> >>>>
> >>>>
> >>>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
> >>>>
> >>>>        Watchdog enabled
> >>>> I2C:   ready
> >>>> DRAM:  512 MiB
> >>>> NAND:  0 MiB
> >>>> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> >>>> *** Error - No Valid Environment Area found
> >>>> *** Warning - bad CRC, using default environment
> >>>>
> >>>> Net:   <ethaddr> not set. Validating first E-fuse MAC
> >>>> cpsw, usb_ether
> >>>> Hit any key to stop autoboot:  0
> >>>> switch to partitions #0, OK
> >>>> mmc0 is current device
> >>>> Scanning mmc 0:2...
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Failed to mount ext2 filesystem...
> >>>> ** Unrecognized filesystem type **
> >>>> Card did not respond to voltage select!
> >>>> Booting from nand ...
> >>>>
> >>>> no devices available
> >>>>
> >>>> no devices available
> >>>> Bad Linux ARM zImage magic!
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> When I am in the uboot command processor, I cannot select the internal
> >>>> eMMC at all:
> >>>>
> >>>> U-Boot# mmc dev 1
> >>>> Card did not respond to voltage select!
> >>>>
> >>>>
> >>>>
> >>>> Previously, I was booting with no problems from either eMMC or SD with
> >>>> F21.
> >>>>
> >>>>
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Adam
> >>>>
> >>>>
> >>>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson at gmail.com>
> >>>> wrote:
> >>>>> Hi All,
> >>>>>
> >>>>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
> >>>>>
> >>>>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
> >>>>>
> >>>>> This release contains numerous fixes and improvements over the
> >>>>> currently shipping release including, but by no means limited to:
> >>>>> * Upstream generic distro support (huge thanks to Dennis Gilmore and
> >>>>> Steven Warren for their tireless work to get this upstream
> >>>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
> >>>>> this tireless work on this)
> >>>>> * Numerous other improvements too long to name.
> >>>>>
> >>>>> New devices that we now enable in this release, in no particular order,
> >>>>> include:
> >>>>>
> >>>>> AllWinner:
> >>>>> A10-OLinuXino-Lime
> >>>>> A10s-OLinuXino-M
> >>>>> A13-OLinuXino
> >>>>> A13-OLinuXinoM
> >>>>> A20-OLinuXino_MICRO
> >>>>> Bananapi
> >>>>> Cubieboard
> >>>>> Cubieboard2
> >>>>> Cubietruck
> >>>>> Mele_A1000
> >>>>> Mele_A1000G
> >>>>> Mini-X
> >>>>> Mini-X-1Gb
> >>>>>
> >>>>> Tegra:
> >>>>> jetson-tk1
> >>>>>
> >>>>> i.MX6
> >>>>> cm_fx6 (Utilite)
> >>>>> riotboard
> >>>>>
> >>>>> It's not yet in nightly builds but I'm going to request it for the
> >>>>> next Beta TC compose.
> >>>>>
> >>>>> Known issues:
> >>>>> * Panda is not yet ported to generic distro support
> >>>>>
> >>>>> Please test and provide feedback.
> >>>>>
> >>>>> Peter
> >>>>> _______________________________________________
> >>>>> arm mailing list
> >>>>> arm at lists.fedoraproject.org
> >>>>> https://admin.fedoraproject.org/mailman/listinfo/arm
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/arm