[fedora-arm] CubieTruck - Wifi

[Hans de Goede]

Hi,

On 19-08-15 00:04, Robert Moskowitz wrote:
>
>
> On 08/18/2015 05:31 PM, Peter Robinson wrote:
>> On Tue, Aug 18, 2015 at 10:13 PM, Robert Moskowitz <rgm at htt-consult.com> wrote:
>>> I have not done any Fedora-arm testing for many weeks and am behind on
>>> developments.  Correct me if I missed something in past threads.
>>>
>>> I am trying to make sense of this thread, though.
>>>
>>> I am running the lastest F23 build (Fedora-Xfce-armhfp-23-20150818-sda) and
>>> no Wifi (or Bluetooth) flashing LEDs.   On the serial console on firstboot I
>>> do see:
>>>
>>> [   28.134790] cfg80211: World regulatory domain updated:
>>> [   28.134804] cfg80211:  DFS Master region: unset
>>> [   28.134805] cfg80211:   (start_freq - end_freq @ bandwidth),
>>> (max_antenna_gain, max_eirp), (dfs_cac_time)
>>> [   28.134818] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
>>> 2000 mBm), (N/A)
>>> [   28.134824] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
>>> 2000 mBm), (N/A)
>>> [   28.134829] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
>>> 2000 mBm), (N/A)
>>> [   28.134837] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
>>> KHz AUTO), (N/A, 2000 mBm), (N/A)
>>> [   28.134954] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
>>> KHz AUTO), (N/A, 2000 mBm), (0 s)
>>> [   28.134961] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
>>> 2000 mBm), (0 s)
>>> [   28.134967] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
>>> 2000 mBm), (N/A)
>>> [   28.134973] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
>>> (N/A, 0 mBm), (N/A)
>>>
>>> So one might THINK that the WiFi was seen.
>>>
>>> But nothing shows for WiFi in NetworkManager.
>> Did you add a firmware? At the moment you need to get the firmware
>> from elsewhere as we don't have the ability to legally redistribute it
>> directly.
>
> ???  For some time, it seemed that Cubietruck working WiFi was based on Hans getting things connected, not also a vendor's firmware. Plus Clive's and Han's messages seem to say that they have gotten the WiFi working with an nvram patch.

Right the actual firmware is part of linux-firmware, but you do need
a board specific nvram file and drop that under /lib/firmware, see
the dmesg output when the module loads.

Regards,

Hans