[fedora-arm] Getting FC21/arm to boot on beaglebone black/beagle XM/beagleboard/Mele A2000
Frans Meulenbroeks
fransmeulenbroeks at gmail.com
Thu Jan 29 21:54:55 UTC 2015
Hi Hans,
Thanks for your info.That helped big time.
I had the hdmi connected to an alternate input of my monitor and switched
monitor input after booting....
I did a quick test booting the board with the monitor input to HDMI and it
worked like a charm!
Thanks again, Frans.
PS: looking forward to your talk @ Fosdem.
2015-01-29 12:24 GMT+01:00 Hans de Goede <hdegoede at redhat.com>:
> Hi,
>
> On 29-01-15 11:34, Frans Meulenbroeks wrote:
>
>> Hi Hans, all
>>
>> Took a bit of time, but managed to do a test with
>> Fedora-Xfce-armhfp-rawhide-20150128-sda.raw.xz
>> <https://kojipkgs.fedoraproject.org//work/tasks/6681/8756681/Fedora-Xfce-
>> armhfp-rawhide-20150128-sda.raw.xz>
>>
>> I also took the u-boot from that one. Md5sum:
>> 0829a585ac67b135e2a9f0b1a9279c0d u-boot-sunxi-with-spl.bin
>>
>> I did check both VGA and HDMI but got no output on either ports.
>>
>> I could ssh into the board with some effort:
>> The information here:
>> https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#FAQ
>> is incomplete.
>> I also had to disable selinux (the keys I had did not have an selinux
>> context)
>> http://docs.fedoraproject.org/nl-NL/Fedora/11/html/Security-
>> Enhanced_Linux/sect-Security-Enhanced_Linux-Enabling_and_
>> Disabling_SELinux-Disabling_SELinux.html
>>
>> I also tried startx but it complained that no screens were found.
>>
>> fpaste of dmesg:
>> http://paste.fedoraproject.org/177436/42252728
>>
>> fpaste of /proc/devices:
>> http://paste.fedoraproject.org/177437/27367142
>>
>> If there is any other info you want me to share or additional tests you
>> want me to do, let me know (might take a day or so before I get to it
>> though)
>>
>
> To get HDMI out you need to have a hdmi cable plugged in (on both ends)
> before booting the device, if no cable is detected u-boot will continue
> without initializing hdmi. Note that the current rawhide u-boot only
> does 1024x768. Upstream u-boot git master does DDC + EDID and then uses
> the monitor / tv's native resolution.
>
> Regards,
>
> Hans
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/arm/attachments/20150129/0491ed01/attachment.html>
More information about the arm
mailing list