[fedora-arm] Fedora 21 on BeagleBoard-xM Rev C

[Scott M. Jones]

I would have thought the first .dtb you were using was the correct one for you. I'm surprised the LABEL=_/ option doesn't work. Maybe run blkid and double check the UUID? Can you post the partition table? I only see p1 - p3.


> On Mar 1, 2015, at 12:12 AM, Sergio Durigan Junior <sergiodj at sergiodj.net> wrote:
> 
>> On Saturday, February 28 2015, Scott M. Jones wrote:
>> 
>> I'm booting F21 LXDE successfully on Beagleboard xM rev B.  Different
>> DTB but the rest should be the same.  Comparing mine to yours you may be
>> loading the kernel at the wrong address.  I'm not really using the boot.scr.
>> 
>> More info here including my uEnv.txt:
>> https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html
> 
> Thanks for the reply, Scott.  Actually, your post was one of the first
> ones I saw, and apparently I should have paid more attention to it :-).
> 
> Well, I don't think the problem is loading the Linux kernel at the wrong
> address, but rather using the wrong dtb file.  I was using
> omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb,
> at least I got the kernel to boot.  I am not really sure the -ab version
> fully works with rev C, but that's the best I've gotten now, apparently.
> 
> *However*, that did not really solve everything for me, because now I am
> seeing errors during the boot, and I can't get the boot to complete.
> Here's the full log:
> 
>  <http://fpaste.org/191874/51860941/>
> 
> The real problem is getting the root right here, I think (although I
> also don't think the error messages are good too).  I check the UUID of
> the partition and it's all good; I also tried using the LABEL=_/ value
> in the root= parameter, but it didn't work also.
> 
> Ideas here?  Thanks,
> 
> -- 
> Sergio
> GPG key ID: 0x65FC5E36
> Please send encrypted e-mail if possible
> http://sergiodj.net/