[fedora-arm] F23 - multiport sata card on Cubietruck
Robert Moskowitz
rgm at htt-consult.com
Thu Sep 17 12:55:32 UTC 2015
On 09/17/2015 08:51 AM, Pavel Holica wrote:
>
>
> 2015-09-17 14:33 GMT+02:00 Robert Moskowitz <rgm at htt-consult.com
> <mailto:rgm at htt-consult.com>>:
>
>
>
> On 09/17/2015 06:53 AM, Peter Robinson wrote:
>
> On Wed, Sep 16, 2015 at 10:00 PM, Robert Moskowitz
> <rgm at htt-consult.com <mailto:rgm at htt-consult.com>> wrote:
>
> I went searching for information on sata port multiplier
> and found:
>
> http://www.spinics.net/lists/arm-kernel/msg377619.html
>
> Is this still the status of this and if so how do I set
> AHCI_HFLAG_NO_PMP to
> true?
>
> Well if you read the message you reference it states:
>
> "So add a module parameter to enable pmp usage, and default
> this to off, so
> that directly attached disks keep working normally."
>
> So it seems if you use a multiple you need to do a different
> option
> than without so it indicates it would need it. If you do "modinfo
> ahci_sunxi" you'll see that actually the patch has landed and
> there is
> a enable_pmp parameter. So you'll need to create something like
> /etc/modprobe.d/sunxi.conf and add a line "options ahci_sunxi
> enable_pmp=1" line (no I've not verified that is correct so you'll
> need to check it) and reboot.
>
>
> Ah, thanks! I will try that. I was looking at:
> /boot/extlinux/extlinux.conf and adding to the append line
> something like:
>
> AHCI_HFLAG_NO_PMP=0
>
>
> So I would have been heading in the wrong direction...
>
> Not entirely, it should also work having ahci_sunxi.enable_pmp=1 on
> kernel cmdline.
> Also, you may need to rebuild initramfs by running dracut -f after
> modifying modprobe.d files.
So either way I may need to rebuild initramfs? I have yet to get this
right.
I boot with this option. It probably will not work; I will notice
this. Then as root I issue 'dracut -f' then reboot?
>
>
> Peter
>
> But it seems there were more messages about this...
>
>
> On 09/16/2015 03:34 PM, Robert Moskowitz wrote:
>
> I figured out the various ports on the muitiport card
> and have 2 sata
> drives I am testing with.
>
> One drive works fine. But two drives it is a bit of a
> guess which one
> will come in as /dev/sda (the mSD card is
> /dev/mmcblk0). And only one drive
> is visible. Or at least gparted is only seeing one.
>
> From messages back last fall? I had that this board
> would let me use
> multiple sata drives, so there seems to be something I
> am missing.
>
> Right now each item has its own power supply:
> Cubietruck, Multiport card,
> Drive1, and Drive2. So it is not a power issue (or
> shouldn't be).
>
>
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org
> <mailto:arm at lists.fedoraproject.org>
> https://admin.fedoraproject.org/mailman/listinfo/arm
>
>
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org
> <mailto:arm at lists.fedoraproject.org>
> https://admin.fedoraproject.org/mailman/listinfo/arm
>
>
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org <mailto:arm at lists.fedoraproject.org>
> https://admin.fedoraproject.org/mailman/listinfo/arm
>
>
>
>
> --
> Pavel Holica
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/arm/attachments/20150917/65e9cb24/attachment-0001.html>
More information about the arm
mailing list