[Fedora-users-br] Fita DLT
Adere - Levi / Suporte Linux
levi.alves em adere.com
Terça Dezembro 20 15:20:04 UTC 2005
Digite o comando abaixo e esta me mostrando isso, alguem sabe me dizer
se estes error são de hardware ou não?
[root em pateta root]# dmesg
s=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0
PCI->APIC IRQ transform: (B0,I2,P0) -> 16
PCI->APIC IRQ transform: (B1,I2,P0) -> 17
PCI->APIC IRQ transform: (B1,I4,P0) -> 29
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:pio
hdc: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 293k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
Fusion MPT base driver 2.03.00
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: 1 MPT adapter found, 1 installed.
Fusion MPT SCSI Host driver 2.03.00
scsi0 : ioc0: LSI53C1030, FwRev=01030a00h, Ports=1, MaxQ=255, IRQ=29
blk: queue c3614a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Vendor: BNCHMARK Model: DLT1 Rev: 5538
Type: Sequential-Access ANSI SCSI revision: 02
blk: queue c3614618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002)
megaraid: found 0x1000:0x1960:idx 0:bus 1:slot 2:func 0
scsi1 : Found a MegaRAID controller at 0xf8851000, IRQ: 17
scsi1 : Enabling 64 bit support
megaraid: [3.41:1.06] detected 1 logical drives
megaraid: supports extended CDBs.
megaraid: channel[1] is raid.
scsi1 : LSI Logic MegaRAID 3.41 254 commands 15 targs 4 chans 7 luns
scsi1: scanning virtual channel 0 for logical drives.
Vendor: MegaRAID Model: LD0 RAID1 69880R Rev: 3.41
Type: Direct-Access ANSI SCSI revision: 02
blk: queue c3614418, I/O limit 4095Mb (mask 0xffffffff)
scsi1: scanning virtual channel 1 for logical drives.
scsi1: scanning virtual channel 2 for logical drives.
scsi1: scanning physical channel 0 for devices.
Vendor: SDR Model: GEM318P Rev: 1
Type: Processor ANSI SCSI revision: 02
blk: queue c3614218, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 143114240 512-byte hdwr sectors (73274 MB)
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
LVM version 1.0.5+(22/07/2002) module loaded
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 156k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf88a3000, IRQ 10
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech em suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
loop: loaded (max 8 devices)
Adding Swap: 1052216k swap-space (priority -1)
Adding Swap: 1052216k swap-space (priority -2)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 6, lun 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
Copyright (c) 1999-2003 Intel Corporation.
divert: allocating divert_blk for eth0
eth0: Intel(R) PRO/1000 Network Connection
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
st0: Block limits 2 - 16777214 bytes.
e1000: eth0 NIC Link is Down
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
e1000: eth0 NIC Link is Down
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
ide-floppy driver 0.99.newide
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
cdrom: open failed.
SCSI Error: (0:6:0) Status=02h (CHECK CONDITION)
Key=8h (BLANK CHECK); FRU=00h
ASC/ASCQ=00h/05h ""
CDB: 08 00 00 28 00 00 - "READ(6)"
SCSI Error: (0:6:0) Status=02h (CHECK CONDITION)
Key=8h (BLANK CHECK); FRU=00h
ASC/ASCQ=00h/05h ""
CDB: 08 00 00 28 00 00 - "READ(6)"
Hugo Cisneiros escreveu:
> Adere - Levi / Suporte Linux wrote:
>
>> Pessoal fui dar o seguinte comando abaixo e esta dando esta mensagem
>> em todas as fitas DLT que eu tenho, por favor alguem sabe me dizer o
>> que pode ser?
>>
>> root em pateta root]# tar tvf /dev/st0 /users/publico/CITT
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: /dev/st0: Cannot read: Input/output error
>> tar: Too many errors, quitting
>> tar: Error is not recoverable: exiting now
>
>
> Hau! Com todas as fitas?
>
> Quem sabe não seja o drive da fita que está ruim? Já tentou ver o que
> o comando 'dmesg' retorna sobre isso? Pode ajudar a identificar algum
> problema.
>
>> --
>> Levi / Suporte Linux
>> ADERE Produtos Auto Adesivos Ltda
>> Estr.Municipal Valencio Calegari, 2002
>> Pq.Santo Antonio - Cep: 13181-905 - Sumaré / SP
>> CNPJ: 46.062.030/0001-23 - I.E.: 671.211.366.119
>> F.: (19) 2104-0700 - Sac: 0800 7012903
>> Visite nosso site: www.adere.com
>> .~. / v \ Seja Livre, use
>> GNU/Linux! / ( ) \ ^^-^^
>
>
--
Levi / Suporte Linux
ADERE Produtos Auto Adesivos Ltda
Estr.Municipal Valencio Calegari, 2002
Pq.Santo Antonio - Cep: 13181-905 - Sumaré / SP
CNPJ: 46.062.030/0001-23 - I.E.: 671.211.366.119
F.: (19) 2104-0700 - Sac: 0800 7012903
Visite nosso site: www.adere.com
.~.
/ v \ Seja Livre, use GNU/Linux!
/ ( ) \
^^-^^
Mais detalhes sobre a lista de discussão br-users