[Fedora-users-br] Re: Digest Fedora-users-br, volume 19, assunto 44
Alberto Monteiro
albmont em centroin.com.br
Sexta Maio 18 18:02:44 UTC 2007
Aracele escreveu:
>
> Galera eu tentei.......
> mas tá difícil para uma usuária básica....
>
> estou colocando um passo a passo para alguém fazer o favor de
> complementar (eu sei que é pedir de mais J)
>
Né não.
Eu já fiquei muito mais tempo perturbando a lista com meus
problemas :-)
> Vai ajudar bastante!!!!
>
> caso esteja faltando algo adicione o mais claro possivel
> Agradacida
>
> {As dificuldades são todas eu nunca usei fedora eu usada o debian }
>
> tudo começou assim:
> [root em localhost ~]# adsl-setup
>
> Welcome to the ADSL client setup. First, I will run some checks on
> your system to make sure the PPPoE client is installed properly...
>
>
> LOGIN NAME
>
> Enter your Login Name (default root): ??????
>
Você tem um provedor, não tem? Esse é o nome da sua conta.
Se não tem provedor, o Velox não vai funcionar (nem no
Linux nem no Ruindows)
> INTERFACE
>
> Enter the Ethernet interface connected to the ADSL modem
> For Solaris, this is likely to be something like /dev/hme0.
> For Linux, it will be ethX, where 'X' is a number.
> (default eth0): ?????????
>
Aceite o default.
> Do you want the link to come up on demand, or stay up continuously?
> If you want it to come up on demand, enter the idle time in seconds
> after which the link should be dropped. If you want the link to
> stay up permanently, enter 'no' (two letters, lower-case.)
> NOTE: Demand-activated links do not interact well with dynamic IP
> addresses. You may have some problems with demand-activated links.
> Enter the demand value (default no): ??????????
>
Tanto faz, mas deixa "no" mesmo.
> DNS
>
> Please enter the IP address of your ISP's primary DNS server.
> If your ISP claims that 'the server will provide dynamic DNS addresses',
> enter 'server' (all lower-case) here.
> If you just press enter, I will assume you know what you are
> doing and not modify your DNS setup.
> Enter the DNS information here: ?????????
>
Depende do seu provedor. Na dúvida, bota "server".
> Please enter the IP address of your ISP's secondary DNS server.
> If you just press enter, I will assume there is only one DNS server.
> Enter the secondary DNS server address here: ????????????
>
Press enter.
> PASSWORD
>
> Please enter your Password: ????
> Please re-enter your Password: ??????
>
Você tem conta em algum provedor, não tem? Essa conta tem uma
senha. É essa que você vai entrar aqui.
> USERCTRL
>
> Please enter 'yes' (three letters, lower-case.) if you want to allow
> normal user to start or stop DSL connection (default yes): ?????????
>
yes.
> FIREWALLING
>
> Please choose the firewall rules to use. Note that these rules are
> very basic. You are strongly encouraged to use a more sophisticated
> firewall setup; however, these will provide basic security. If you
> are running any servers on your machine, you must choose 'NONE' and
> set up firewalling yourself. Otherwise, the firewall rules will deny
> access to all standard servers like Web, e-mail, ftp, etc. If you
> are using SSH, the rules will block outgoing SSH connections which
> allocate a privileged source port.
>
> The firewall choices are:
> 0 - NONE: This script will not set any firewall rules. You are
responsible
> for ensuring the security of your machine. You are STRONGLY
> recommended to use some kind of firewall rules.
> 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing
workstation
> 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
> for a LAN
> Choose a type of firewall (0-2): ????????
>
1
> Start this connection at boot time
>
> Do you want to start this connection at boot time?
> Please enter no or yes (default no):?????????
>
Eu boto "no", porque eu quero o boot o mais rápido possível.
Mas não teria problema colocar "yes".
Deve ser isso.
Alberto Monteiro
Mais detalhes sobre a lista de discussão br-users