[Fedora-users-br] Modem 3G ZTE MF 636 (Brasiltelecom)
Andre Mauricio
ammvaz em gmail.com
Sábado Abril 18 03:51:08 UTC 2009
Isamar e Lista,
Ainda estou brigando com o modem....consegui conectar 2 vezes. No
entanto muitas vezes o modem não consegue conectar e nas duas vezes que
consegui contectar ele simplesmente apagou uns 15 minutos depois.
Notei que as vezes quando espeto o modem na USB tenho uma mensagem de
que algo ocorreu com o Kernel. Acho que fiz alguma bobagem seguindo
alguns tutoriais que li (coisa de novato!).
Não quero instalar o fc-10 novamente.
Existe uma forma de descobrir o que está causando o conflito e a
consequente mensagem de erro?
Abraços
André
-------- Mensagem original --------
De: Isamar Maia <isamar em gmail.com>
Reply-to: Lista de discussão voltada para os usuários brasileiros do
Fedora <fedora-users-br em redhat.com>
Para: Lista de discussão voltada para os usuários brasileiros do Fedora
<fedora-users-br em redhat.com>
Assunto: Re: [Fedora-users-br] Modem 3G ZTE MF 636 (Brasiltelecom)
Data: Mon, 30 Mar 2009 10:34:45 -0300
Beleza.. agora eh so configgurar o /etc/wvdial.conf
2009/3/30 André Maurício <ammvaz em gmail.com>:
> Isamar,
>
> Obrigado, com os passos indicados consegui detectar o modem.
>
> Agora estou brigando para fazer ele conectar.
>
> André
>
>
>
> 2009/3/27 Isamar Maia <isamar em gmail.com>:
>> Seu modem eh este daqui:
>>
>>> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
>>> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
>>> usb 2-2: Product: ZTE CDMA Technologies MSM
>>> usb 2-2: Manufacturer: ZTE,Incorporated
>>> usb 2-2: SerialNumber: 1234567890ABCDEF
>>
>> Teste abri-lo com o wvdial ou gnome-ppp atraves da porta /dev/ttyUSB4
>>
>> Se nao funcionar, tente abri-lo com o "minicom" na mesma porta e rode
>> o comando padrao "HAYES":
>>
>> AT+ZCDRUN=8 <ENTER>
>>
>>
>> Caso nao consiga abri-lo via "minicom" , abra-o usando Hyperterminal
>> numa maquina Windows e dispare o comando acima.
>>
>> Em seguida, crie um regra de HAL para ele ser carregado automagicamente.
>> Coloque o conteudo abaixo em um novo arquivo de nome
>> /etc/udev/rules.d/90-zte.rules
>>
>> ACTION!="add", GOTO="ZTE_End"
>> #
>> SUBSYSTEM=="usb", SYSFS{idProduct}=="0031",
>> SYSFS{idVendor}=="19d2", GOTO="ZTE_Modem"
>> #
>> LABEL="ZTE_Modem"
>> RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x0031",
>> MODE="660", GROUP="dialout"
>> #
>> LABEL="ZTE_End"
>>
>>
>> Veja o posting do "GeorgeVita" em
>> http://ubuntuforums.org/archive/index.php/t-1065934.html
>>
>> Isamar
>>
>>
>>
>> 2009/3/27 André Maurício <ammvaz em gmail.com>:
>>> Caro Isamar, segue abaixo:
>>>
>>> Saida do lsusb
>>>
>>> Bus 002 Device 003: ID 19d2:2000 ONDA Communication S.p.A.
>>> Bus 002 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 006 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400
>>> Hama Optical Mouse
>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B
>>> Wireless 802.11g 54Mbps Network Adapter
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>
>>> saida do dmesg:
>>>
>>> Initializing cgroup subsys cpuset
>>> Initializing cgroup subsys cpu
>>> Linux version 2.6.27.19-170.2.35.fc10.x86_64
>>> (mockbuild em xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105
>>> (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Feb 23 13:00:23 EST 2009
>>> Command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262 rhgb
>>> quiet vga=791
>>> KERNEL supported cpus:
>>> Intel GenuineIntel
>>> AMD AuthenticAMD
>>> Centaur CentaurHauls
>>> BIOS-provided physical RAM map:
>>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>>> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
>>> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
>>> BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
>>> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>>> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>>> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>>> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>>> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>>> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>>> DMI present.
>>> last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff
>>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>>> init_memory_mapping
>>> 0000000000 - 007f600000 page 2M
>>> 007f600000 - 007f6d0000 page 4k
>>> kernel direct mapping tables up to 7f6d0000 @ 8000-c000
>>> last_map_addr: 7f6d0000 end: 7f6d0000
>>> RAMDISK: 37c75000 - 37fefbbf
>>> ACPI: RSDP 000F79D0, 0024 (r2 PTLTD )
>>> ACPI: XSDT 7F6D41B9, 008C (r1 ITINFO 6040000 LTP 0)
>>> ACPI: FACP 7F6DBD48, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
>>> ACPI: DSDT 7F6D577B, 6559 (r2 INTEL CRESTLNE 6040000 INTL 20050624)
>>> ACPI: FACS 7F6DEFC0, 0040
>>> ACPI: APIC 7F6DBE3C, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>>> ACPI: HPET 7F6DBEA4, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>>> ACPI: MCFG 7F6DBEDC, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>>> ACPI: TCPA 7F6DBF18, 0032 (r1 Intel CRESTLN 6040000 5A52)
>>> ACPI: TMOR 7F6DBF4A, 0026 (r1 PTLTD 6040000 PTL 3)
>>> ACPI: APIC 7F6DBF70, 0068 (r1 PTLTD APIC 6040000 LTP
>>> 0)
>>> ACPI: BOOT 7F6DBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
>>> ACPI: SSDT 7F6D54CE, 02AD (r1 SataRe SataAhci 1000 INTL 20050624)
>>> ACPI: SSDT 7F6D5455, 0079 (r1 BrtRef DD01BRT 1000 INTL 20050624)
>>> ACPI: SSDT 7F6D47D1, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
>>> ACPI: SSDT 7F6D472B, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
>>> ACPI: SSDT 7F6D4245, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
>>> ACPI: BIOS bug: multiple APIC/MADT found, using 0
>>> ACPI: If "acpi_apic_instance=2" works better, notify
>>> linux-acpi em vger.kernel.org
>>> No NUMA configuration found
>>> Faking a node at 0000000000000000-000000007f6d0000
>>> Bootmem setup node 0 0000000000000000-000000007f6d0000
>>> NODE_DATA [000000000000a000 - 000000000001efff]
>>> bootmap [000000000001f000 - 000000000002eedf] pages 10
>>> (6 early reservations) ==> bootmem [0000000000 - 007f6d0000]
>>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>>> 0000001000]
>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>>> 0000008000]
>>> #2 [0000200000 - 0000a2f0cc] TEXT DATA BSS ==> [0000200000 -
>>> 0000a2f0cc]
>>> #3 [0037c75000 - 0037fefbbf] RAMDISK ==> [0037c75000 -
>>> 0037fefbbf]
>>> #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
>>> 0000100000]
>>> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 -
>>> 000000a000]
>>> found SMP MP-table at [ffff8800000f7a50] 000f7a50
>>> [ffffe20000000000-ffffe20001bfffff] PMD ->
>>> [ffff880001200000-ffff880002dfffff] on node 0
>>> Zone PFN ranges:
>>> DMA 0x00000000 -> 0x00001000
>>> DMA32 0x00001000 -> 0x00100000
>>> Normal 0x00100000 -> 0x00100000
>>> Movable zone start PFN for each node
>>> early_node_map[2] active PFN ranges
>>> 0: 0x00000000 -> 0x0000009f
>>> 0: 0x00000100 -> 0x0007f6d0
>>> On node 0 totalpages: 521839
>>> DMA zone: 1745 pages, LIFO batch:0
>>> DMA32 zone: 510760 pages, LIFO batch:31
>>> ACPI: PM-Timer IO Port: 0x1008
>>> ACPI: Local APIC address 0xfee00000
>>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>>> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> ACPI: IRQ0 used by override.
>>> ACPI: IRQ2 used by override.
>>> ACPI: IRQ9 used by override.
>>> Setting APIC routing to flat
>>> ACPI: HPET id: 0x8086a201 base: 0xfed00000
>>> Using ACPI (MADT) for SMP configuration information
>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>>> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>>> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>>> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>>> PERCPU: Allocating 65184 bytes of per cpu data
>>> NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>>> Built 1 zonelists in Node order, mobility grouping on. Total pages:
>>> 512505
>>> Policy zone: DMA32
>>> Kernel command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262
>>> rhgb quiet vga=791
>>> Initializing CPU#0
>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>> Extended CMOS year: 2000
>>> TSC: PIT calibration confirmed by PMTIMER.
>>> TSC: using PMTIMER calibration value
>>> Detected 1861.989 MHz processor.
>>> Console: colour dummy device 80x25
>>> console [tty0] enabled
>>> Checking aperture...
>>> No AGP bridge found
>>> Calgary: detecting Calgary via BIOS EBDA area
>>> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>>> Memory: 2046372k/2087744k available (3307k kernel code, 40984k
>>> reserved, 1840k data, 1296k init)
>>> CPA: page pool initialized 1 of 1 pages preallocated
>>> SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
>>> Nodes=1
>>> hpet clockevent registered
>>> Calibrating delay loop (skipped), value calculated using timer
>>> frequency.. 3723.97 BogoMIPS (lpj=1861989)
>>> Security Framework initialized
>>> SELinux: Initializing.
>>> SELinux: Starting in permissive mode
>>> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>>> Mount-cache hash table entries: 256
>>> Initializing cgroup subsys ns
>>> Initializing cgroup subsys cpuacct
>>> Initializing cgroup subsys devices
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>> CPU: L2 cache: 1024K
>>> CPU 0/0 -> Node 0
>>> CPU: Physical Processor ID: 0
>>> CPU: Processor Core ID: 0
>>> CPU0: Thermal monitoring enabled (TM2)
>>> using mwait in idle threads.
>>> ACPI: Core revision 20080609
>>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
>>> Using local APIC timer interrupts.
>>> APIC timer calibration result 8312466
>>> Detected 8.312 MHz APIC timer.
>>> Booting processor 1/1 ip 6000
>>> Initializing CPU#1
>>> Calibrating delay using timer specific routine.. 3723.91 BogoMIPS
>>> (lpj=1861955)
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>> CPU: L2 cache: 1024K
>>> CPU 1/1 -> Node 0
>>> CPU: Physical Processor ID: 0
>>> CPU: Processor Core ID: 1
>>> CPU1: Thermal monitoring enabled (TM2)
>>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>>> CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
>>> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>>> Brought up 2 CPUs
>>> Total of 2 processors activated (7447.88 BogoMIPS).
>>> sizeof(vma)=176 bytes
>>> sizeof(page)=56 bytes
>>> sizeof(inode)=560 bytes
>>> sizeof(dentry)=208 bytes
>>> sizeof(ext3inode)=760 bytes
>>> sizeof(buffer_head)=104 bytes
>>> sizeof(skbuff)=232 bytes
>>> sizeof(task_struct)=5904 bytes
>>> CPU0 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 0 1
>>> domain 1: span 0-1 level NODE
>>> groups: 0-1
>>> CPU1 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 1 0
>>> domain 1: span 0-1 level NODE
>>> groups: 0-1
>>> net_namespace: 1552 bytes
>>> Booting paravirtualized kernel on bare hardware
>>> Time: 17:24:02 Date: 03/27/09
>>> NET: Registered protocol family 16
>>> No dock devices found.
>>> ACPI: bus type pci registered
>>> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>>> PCI: MCFG area at e0000000 reserved in E820
>>> PCI: Using MMCONFIG at e0000000 - efffffff
>>> PCI: Using configuration type 1 for base access
>>> ACPI: EC: Look up EC in DSDT
>>> ACPI: BIOS _OSI(Linux) query ignored
>>> ACPI: If "acpi_osi=Linux" works better, please notify
>>> linux-acpi em vger.kernel.org
>>> ACPI: Interpreter enabled
>>> ACPI: (supports S0 S3 S4 S5)
>>> ACPI: Using IOAPIC for interrupt routing
>>> ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
>>> ACPI: EC: driver started in poll mode
>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>> PCI: 0000:00:02.0 reg 10 64bit mmio: [f4000000, f40fffff]
>>> PCI: 0000:00:02.0 reg 18 64bit mmio: [d0000000, dfffffff]
>>> PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
>>> PCI: 0000:00:02.1 reg 10 64bit mmio: [f4100000, f41fffff]
>>> PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f]
>>> PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f]
>>> PCI: 0000:00:1a.7 reg 10 32bit mmio: [f4504800, f4504bff]
>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>> pci 0000:00:1a.7: PME# disabled
>>> PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4500000, f4503fff]
>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>> pci 0000:00:1b.0: PME# disabled
>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>> pci 0000:00:1c.0: PME# disabled
>>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>>> pci 0000:00:1c.5: PME# disabled
>>> PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
>>> PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
>>> PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
>>> PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4504c00, f4504fff]
>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>> pci 0000:00:1d.7: PME# disabled
>>> pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
>>> ACPI/GPIO/TCO
>>> pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>>> PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>>> PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>>> PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>>> PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>>> PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
>>> PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07]
>>> PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7]
>>> PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df]
>>> PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3]
>>> PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff]
>>> PCI: 0000:00:1f.2 reg 24 32bit mmio: [f4504000, f45047ff]
>>> pci 0000:00:1f.2: PME# supported from D3hot
>>> pci 0000:00:1f.2: PME# disabled
>>> PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff]
>>> PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f]
>>> PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
>>> PCI: bridge 0000:00:1c.0 32bit mmio: [f2000000, f3ffffff]
>>> PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
>>> PCI: 0000:04:00.0 reg 10 64bit mmio: [f4200000, f4203fff]
>>> PCI: 0000:04:00.0 reg 18 io port: [3000, 30ff]
>>> PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff]
>>> pci 0000:04:00.0: supports D1
>>> pci 0000:04:00.0: supports D2
>>> pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>>> pci 0000:04:00.0: PME# disabled
>>> PCI: bridge 0000:00:1c.5 io port: [3000, 3fff]
>>> PCI: bridge 0000:00:1c.5 32bit mmio: [f4200000, f42fffff]
>>> pci 0000:00:1e.0: transparent bridge
>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>>> ACPI Error (uteval-0243): No object was returned from
>>> [\_SB_.PCI0.PCIB._PRT] (Node ffff88007f34c360), AE_NOT_EXIST
>>> ACPI Exception (pci_irq-0290): AE_NOT_EXIST, Evaluating _PRT
>>> [AE_NOT_EXIST] [20080609]
>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
>>> disabled.
>>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>>> ACPI: Power Resource [FN00] (off)
>>> ACPI: Power Resource [FN01] (off)
>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>> pnp: PnP ACPI init
>>> ACPI: bus type pnp registered
>>> pnp: PnP ACPI: found 10 devices
>>> ACPI: ACPI bus type pnp unregistered
>>> SCSI subsystem initialized
>>> libata version 3.00 loaded.
>>> usbcore: registered new interface driver usbfs
>>> usbcore: registered new interface driver hub
>>> usbcore: registered new device driver usb
>>> PCI: Using ACPI for IRQ routing
>>> NetLabel: Initializing
>>> NetLabel: domain hash size = 128
>>> NetLabel: protocols = UNLABELED CIPSOv4
>>> NetLabel: unlabeled traffic allowed by default
>>> PCI-GART: No AMD northbridge found.
>>> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>>> hpet0: 3 64-bit timers, 14318180 Hz
>>> tracer: 1286 pages allocated for 65536 entries of 80 bytes
>>> actual entries 65586
>>> ACPI: RTC can wake from S4
>>> system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>>> system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>>> system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>>> system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>>> system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>>> system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>>> system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>>> system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>>> system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>>> system 00:06: ioport range 0x680-0x69f has been reserved
>>> system 00:06: ioport range 0x800-0x80f has been reserved
>>> system 00:06: ioport range 0x1000-0x107f has been reserved
>>> system 00:06: ioport range 0x1180-0x11bf has been reserved
>>> system 00:06: ioport range 0x1640-0x164f has been reserved
>>> system 00:06: ioport range 0xfe00-0xfe00 has been reserved
>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>> pci 0000:00:1c.0: IO window: 0x2000-0x2fff
>>> pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff
>>> pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
>>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
>>> pci 0000:00:1c.5: IO window: 0x3000-0x3fff
>>> pci 0000:00:1c.5: MEM window: 0xf4200000-0xf42fffff
>>> pci 0000:00:1c.5: PREFETCH window: 0x00000088000000-0x000000880fffff
>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>>> pci 0000:00:1e.0: IO window: disabled
>>> pci 0000:00:1e.0: MEM window: disabled
>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>>> pci 0000:00:1c.0: setting latency timer to 64
>>> pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>>> pci 0000:00:1c.5: setting latency timer to 64
>>> pci 0000:00:1e.0: setting latency timer to 64
>>> bus: 00 index 0 io port: [0, ffff]
>>> bus: 00 index 1 mmio: [0, ffffffffffffffff]
>>> bus: 02 index 0 io port: [2000, 2fff]
>>> bus: 02 index 1 mmio: [f2000000, f3ffffff]
>>> bus: 02 index 2 mmio: [f0000000, f1ffffff]
>>> bus: 02 index 3 mmio: [0, 0]
>>> bus: 04 index 0 io port: [3000, 3fff]
>>> bus: 04 index 1 mmio: [f4200000, f42fffff]
>>> bus: 04 index 2 mmio: [88000000, 880fffff]
>>> bus: 04 index 3 mmio: [0, 0]
>>> bus: 05 index 0 mmio: [0, 0]
>>> bus: 05 index 1 mmio: [0, 0]
>>> bus: 05 index 2 mmio: [0, 0]
>>> bus: 05 index 3 io port: [0, ffff]
>>> bus: 05 index 4 mmio: [0, ffffffffffffffff]
>>> NET: Registered protocol family 2
>>> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>> TCP: Hash tables configured (established 262144 bind 65536)
>>> TCP reno registered
>>> NET: Registered protocol family 1
>>> checking if image is initramfs...<7>Switched to high resolution mode
>>> on CPU 1
>>> Switched to high resolution mode on CPU 0
>>> it is
>>> Freeing initrd memory: 3562k freed
>>> Simple Boot Flag at 0x36 set to 0x80
>>> audit: initializing netlink socket (disabled)
>>> type=2000 audit(1238174642.893:1): initialized
>>> HugeTLB registered 2 MB page size, pre-allocated 0 pages
>>> VFS: Disk quotas dquot_6.5.1
>>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>>> msgmni has been set to 4003
>>> SELinux: Registering netfilter hooks
>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>>> io scheduler noop registered
>>> io scheduler anticipatory registered
>>> io scheduler deadline registered
>>> io scheduler cfq registered (default)
>>> pci 0000:00:02.0: Boot video device
>>> pcieport-driver 0000:00:1c.0: setting latency timer to 64
>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>> pci_express 0000:00:1c.0:pcie00: allocate port service
>>> pci_express 0000:00:1c.0:pcie02: allocate port service
>>> pci_express 0000:00:1c.0:pcie03: allocate port service
>>> pcieport-driver 0000:00:1c.5: setting latency timer to 64
>>> pcieport-driver 0000:00:1c.5: found MSI capability
>>> pci_express 0000:00:1c.5:pcie00: allocate port service
>>> pci_express 0000:00:1c.5:pcie02: allocate port service
>>> pci_express 0000:00:1c.5:pcie03: allocate port service
>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>>> acpiphp_glue: can't get bus number, assuming 0
>>> vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using
>>> 3072k, total 7616k
>>> vesafb: mode is 1024x768x16, linelength=2048, pages=3
>>> vesafb: scrolling: redraw
>>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>>> Console: switching to colour frame buffer device 128x48
>>> fb0: VESA VGA frame buffer device
>>> input: Power Button (FF) as
>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>>> ACPI: Power Button (FF) [PWRF]
>>> input: Lid Switch as
>>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>>> ACPI: Lid Switch [LID]
>>> input: Power Button (CM) as
>>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>>> ACPI: Power Button (CM) [PWRB]
>>> input: Sleep Button (CM) as
>>> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>>> ACPI: Sleep Button (CM) [SLPB]
>>> ACPI: Transitioning device [FAN0] to D3
>>> fan PNP0C0B:00: registered as cooling_device0
>>> ACPI: Fan [FAN0] (off)
>>> ACPI: Transitioning device [FAN1] to D3
>>> fan PNP0C0B:01: registered as cooling_device1
>>> ACPI: Fan [FAN1] (off)
>>> ACPI: SSDT 7F6D5113, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
>>> ACPI: SSDT 7F6D4A30, 065E (r1 PmRef Cpu0Cst 3001 INTL 20050624)
>>> Monitor-Mwait will be used to enter C-1 state
>>> Monitor-Mwait will be used to enter C-2 state
>>> Monitor-Mwait will be used to enter C-3 state
>>> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>>> processor ACPI0007:00: registered as cooling_device2
>>> ACPI: Processor [CPU0] (supports 8 throttling states)
>>> ACPI: SSDT 7F6D538D, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
>>> ACPI: SSDT 7F6D508E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
>>> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>>> processor ACPI0007:01: registered as cooling_device3
>>> ACPI: Processor [CPU1] (supports 8 throttling states)
>>> thermal LNXTHERM:01: registered as thermal_zone0
>>> ACPI: Thermal Zone [TZ00] (31 C)
>>> thermal LNXTHERM:02: registered as thermal_zone1
>>> ACPI: Thermal Zone [TZ01] (27 C)
>>> hpet_resources: 0xfed00000 is busy
>>> Non-volatile memory driver v1.2
>>> Linux agpgart interface v0.103
>>> agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>>> agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>>> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>>> Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>>> brd: module loaded
>>> loop: module loaded
>>> input: Macintosh mouse button emulation as
>>> /devices/virtual/input/input4
>>> Driver 'sd' needs updating - please use bus_type methods
>>> Driver 'sr' needs updating - please use bus_type methods
>>> ahci 0000:00:1f.2: version 3.0
>>> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>>> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl
>>> SATA mode
>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
>>> ahci 0000:00:1f.2: setting latency timer to 64
>>> scsi0 : ahci
>>> scsi1 : ahci
>>> scsi2 : ahci
>>> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
>>> irq 19
>>> ata2: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504180 irq 19
>>> ata3: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504200 irq 19
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> ata1.00: _GTF unexpected object type 0x1
>>> ata1.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7
>>> ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>>> ata1.00: _GTF unexpected object type 0x1
>>> ata1.00: configured for UDMA/133
>>> ata2: SATA link down (SStatus 0 SControl 300)
>>> ata3: SATA link down (SStatus 0 SControl 300)
>>> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0
>>> ANSI: 5
>>> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>>> support DPO or FUA
>>> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>>> support DPO or FUA
>>> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>>> sd 0:0:0:0: [sda] Attached SCSI disk
>>> sd 0:0:0:0: Attached scsi generic sg0 type 0
>>> ata_piix 0000:00:1f.1: version 2.12
>>> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>>> ata_piix 0000:00:1f.1: setting latency timer to 64
>>> scsi3 : ata_piix
>>> scsi4 : ata_piix
>>> ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>>> ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>>> ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX09, max UDMA/33
>>> ata4.00: configured for UDMA/33
>>> isa bounce pool size: 16 pages
>>> scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX09 PQ: 0
>>> ANSI: 5
>>> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>>> Uniform CD-ROM driver Revision: 3.20
>>> sr 3:0:0:0: Attached scsi CD-ROM sr0
>>> sr 3:0:0:0: Attached scsi generic sg1 type 5
>>> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>>> ehci_hcd 0000:00:1a.7: setting latency timer to 64
>>> ehci_hcd 0000:00:1a.7: EHCI Host Controller
>>> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>>> ehci_hcd 0000:00:1a.7: debug port 1
>>> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>>> ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4504800
>>> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>>> usb usb1: configuration #1 chosen from 1 choice
>>> hub 1-0:1.0: USB hub found
>>> hub 1-0:1.0: 4 ports detected
>>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb1: Product: EHCI Host Controller
>>> usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
>>> usb usb1: SerialNumber: 0000:00:1a.7
>>> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>>> ehci_hcd 0000:00:1d.7: setting latency timer to 64
>>> ehci_hcd 0000:00:1d.7: EHCI Host Controller
>>> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>>> ehci_hcd 0000:00:1d.7: debug port 1
>>> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>>> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
>>> usb 1-1: new high speed USB device using ehci_hcd and address 2
>>> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>>> usb usb2: configuration #1 chosen from 1 choice
>>> hub 2-0:1.0: USB hub found
>>> hub 2-0:1.0: 6 ports detected
>>> usb 1-1: configuration #1 chosen from 1 choice
>>> usb 1-1: New USB device found, idVendor=0bda, idProduct=8189
>>> usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>>> usb 1-1: Product: RTL8187B_WLAN_Adapter
>>> usb 1-1: Manufacturer: Manufacturer_Realtek
>>> usb 1-1: SerialNumber: 00e04c000001
>>> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>>> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb2: Product: EHCI Host Controller
>>> usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
>>> usb usb2: SerialNumber: 0000:00:1d.7
>>> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>>> USB Universal Host Controller Interface driver v3.0
>>> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>>> uhci_hcd 0000:00:1a.0: setting latency timer to 64
>>> uhci_hcd 0000:00:1a.0: UHCI Host Controller
>>> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>>> uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>>> usb usb3: configuration #1 chosen from 1 choice
>>> hub 3-0:1.0: USB hub found
>>> hub 3-0:1.0: 2 ports detected
>>> usb 2-3: new high speed USB device using ehci_hcd and address 2
>>> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb3: Product: UHCI Host Controller
>>> usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>>> usb usb3: SerialNumber: 0000:00:1a.0
>>> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>>> uhci_hcd 0000:00:1a.1: setting latency timer to 64
>>> uhci_hcd 0000:00:1a.1: UHCI Host Controller
>>> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>>> uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>>> usb usb4: configuration #1 chosen from 1 choice
>>> hub 4-0:1.0: USB hub found
>>> hub 4-0:1.0: 2 ports detected
>>> usb 2-3: configuration #1 chosen from 1 choice
>>> usb 2-3: New USB device found, idVendor=0bda, idProduct=0158
>>> usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>>> usb 2-3: Product: USB2.0-CRW
>>> usb 2-3: Manufacturer: Generic
>>> usb 2-3: SerialNumber: 20060413092100000
>>> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb4: Product: UHCI Host Controller
>>> usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>>> usb usb4: SerialNumber: 0000:00:1a.1
>>> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>>> uhci_hcd 0000:00:1d.0: setting latency timer to 64
>>> uhci_hcd 0000:00:1d.0: UHCI Host Controller
>>> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>>> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>>> usb usb5: configuration #1 chosen from 1 choice
>>> hub 5-0:1.0: USB hub found
>>> hub 5-0:1.0: 2 ports detected
>>> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb5: Product: UHCI Host Controller
>>> usb usb5: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>>> usb usb5: SerialNumber: 0000:00:1d.0
>>> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>>> uhci_hcd 0000:00:1d.1: setting latency timer to 64
>>> uhci_hcd 0000:00:1d.1: UHCI Host Controller
>>> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>>> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>>> usb usb6: configuration #1 chosen from 1 choice
>>> hub 6-0:1.0: USB hub found
>>> hub 6-0:1.0: 2 ports detected
>>> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb6: Product: UHCI Host Controller
>>> usb usb6: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>>> usb usb6: SerialNumber: 0000:00:1d.1
>>> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>>> uhci_hcd 0000:00:1d.2: setting latency timer to 64
>>> uhci_hcd 0000:00:1d.2: UHCI Host Controller
>>> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>>> uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>>> usb usb7: configuration #1 chosen from 1 choice
>>> hub 7-0:1.0: USB hub found
>>> hub 7-0:1.0: 2 ports detected
>>> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>> usb usb7: Product: UHCI Host Controller
>>> usb usb7: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>>> usb usb7: SerialNumber: 0000:00:1d.2
>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>>> i8042.c: Detected active multiplexing controller, rev 1.1.
>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>> serio: i8042 AUX0 port at 0x60,0x64 irq 12
>>> serio: i8042 AUX1 port at 0x60,0x64 irq 12
>>> serio: i8042 AUX2 port at 0x60,0x64 irq 12
>>> serio: i8042 AUX3 port at 0x60,0x64 irq 12
>>> mice: PS/2 mouse device common for all mice
>>> input: AT Translated Set 2 keyboard as
>>> /devices/platform/i8042/serio0/input/input5
>>> rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>>> rtc0: alarms up to one month, y3k, hpet irqs
>>> device-mapper: uevent: version 1.0.3
>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>> dm-devel em redhat.com
>>> cpuidle: using governor ladder
>>> cpuidle: using governor menu
>>> Marking TSC unstable due to TSC halts in idle
>>> usbcore: registered new interface driver hiddev
>>> usbcore: registered new interface driver usbhid
>>> usbhid: v2.6:USB HID core driver
>>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>>> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>>> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module
>>> option or
>>> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>>> ip_tables: (C) 2000-2006 Netfilter Core Team
>>> TCP cubic registered
>>> Initializing XFRM netlink socket
>>> NET: Registered protocol family 17
>>> registered taskstats version 1
>>> Magic number: 1:189:442
>>> Freeing unused kernel memory: 1296k freed
>>> Write protecting the kernel read-only data: 4752k
>>> input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
>>> input: AlpsPS/2 ALPS GlidePoint as
>>> /devices/platform/i8042/serio4/input/input7
>>> SGI XFS with ACLs, security attributes, large block/inode numbers, no
>>> debug enabled
>>> SGI XFS Quota Management subsystem
>>> Clocksource tsc unstable (delta = -138901743 ns)
>>> XFS mounting filesystem sda3
>>> Ending clean XFS mount for filesystem: sda3
>>> SELinux: 8192 avtab hash slots, 112805 rules.
>>> SELinux: 8192 avtab hash slots, 112805 rules.
>>> SELinux: 8 users, 11 roles, 2589 types, 121 bools, 1 sens, 1024 cats
>>> SELinux: 73 classes, 112805 rules
>>> SELinux: Completing initialization.
>>> SELinux: Setting up existing superblocks.
>>> SELinux: initialized (dev sda3, type xfs), uses xattr
>>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>>> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>>> SELinux: initialized (dev selinuxfs, type selinuxfs), uses
>>> genfs_contexts
>>> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>>> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
>>> genfs_contexts
>>> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>>> SELinux: initialized (dev inotifyfs, type inotifyfs), uses
>>> genfs_contexts
>>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>>> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
>>> genfs_contexts
>>> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>>> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>>> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>>> SELinux: initialized (dev proc, type proc), uses genfs_contexts
>>> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>>> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>>> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>>> type=1403 audit(1238174648.220:2): policy loaded auid=4294967295
>>> ses=4294967295
>>> udevd version 127 started
>>> usbcore: registered new interface driver usbserial
>>> usbserial: USB Serial support registered for generic
>>> usbcore: registered new interface driver usbserial_generic
>>> usbserial: USB Serial Driver core
>>> ACPI: AC Adapter [ACAD] (off-line)
>>> ACPI: Battery Slot [BAT0] (battery present)
>>> sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>>> sky2 0000:04:00.0: setting latency timer to 64
>>> sky2 0000:04:00.0: v1.22 addr 0xf4200000 irq 17 Yukon-2 EC Ultra rev 3
>>> sky2 eth0: addr 00:14:0b:4d:d4:ae
>>> acpi device:05: registered as cooling_device4
>>> input: Video Bus as
>>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input8
>>> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
>>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>>> HDA Intel 0000:00:1b.0: setting latency timer to 64
>>> hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>>> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1
>>> (0x14/0x0/0x0/0x0/0x0)
>>> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0
>>> (0x0/0x0/0x0/0x0/0x0)
>>> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1
>>> (0x15/0x0/0x0/0x0/0x0)
>>> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
>>> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x0,
>>> line=0x0, fline=0x0, cd=0x0, aux=0x0
>>> iTCO_vendor_support: vendor-support=0
>>> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>>> iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>>> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>>> Initializing USB Mass Storage driver...
>>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>>> ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI
>>> region SMBI [0x1c20-0x1c2f]
>>> ACPI: Device needs an ACPI driver
>>> input: PC Speaker as /devices/platform/pcspkr/input/input9
>>> rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could
>>> damage your
>>> hardware, use at your own risk
>>> phy0: Selected rate control algorithm 'pid'
>>> phy0: hwaddr 00:22:43:27:b8:4c, RTL8187BvE V0 + rtl8225z2
>>> usbcore: registered new interface driver rtl8187
>>> scsi5 : SCSI emulation for USB Mass Storage devices
>>> usb-storage: device found at 2
>>> usb-storage: waiting for device to settle before scanning
>>> usbcore: registered new interface driver usb-storage
>>> USB Mass Storage support registered.
>>> device-mapper: multipath: version 1.0.5 loaded
>>> XFS mounting filesystem sda6
>>> Ending clean XFS mount for filesystem: sda6
>>> SELinux: initialized (dev sda6, type xfs), uses xattr
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on sda2, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> SELinux: initialized (dev sda2, type ext3), uses xattr
>>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>>> usb-storage: device scan complete
>>> scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
>>> ANSI: 0 CCS
>>> sd 5:0:0:0: [sdb] Attached SCSI removable disk
>>> sd 5:0:0:0: Attached scsi generic sg2 type 0
>>> Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1
>>> across:2048248k
>>> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
>>> genfs_contexts
>>> IA-32 Microcode Update Driver: v1.14a <tigran em aivazian.fsnet.co.uk>
>>> firmware: requesting intel-ucode/06-0f-0d
>>> firmware: requesting intel-ucode/06-0f-0d
>>> NET: Registered protocol family 10
>>> lo: Disabled Privacy Extensions
>>> ip6_tables: (C) 2000-2006 Netfilter Core Team
>>> RPC: Registered udp transport module.
>>> RPC: Registered tcp transport module.
>>> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
>>> genfs_contexts
>>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>>> Bluetooth: Core ver 2.13
>>> NET: Registered protocol family 31
>>> Bluetooth: HCI device and connection manager initialized
>>> Bluetooth: HCI socket layer initialized
>>> Bluetooth: L2CAP ver 2.11
>>> Bluetooth: L2CAP socket layer initialized
>>> Bluetooth: SCO (Voice Link) ver 0.6
>>> Bluetooth: SCO socket layer initialized
>>> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>>> Bluetooth: BNEP filters: protocol multicast
>>> Bridge firewalling registered
>>> sky2 eth0: enabling interface
>>> ADDRCONF(NETDEV_UP): eth0: link is not ready
>>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>>> virbr0: starting userspace STP failed, starting kernel STP
>>> SELinux: initialized (dev proc, type proc), uses genfs_contexts
>>> Not cloning cgroup for unused subsystem ns
>>> usbcore: deregistering interface driver usb-storage
>>> usbcore: deregistering interface driver usbserial_generic
>>> usbserial: USB Serial deregistering driver generic
>>> usbcore: deregistering interface driver usbserial
>>> usbcore: registered new interface driver usbserial
>>> usbserial: USB Serial support registered for generic
>>> usbcore: registered new interface driver usbserial_generic
>>> usbserial: USB Serial Driver core
>>> usbserial: USB Serial support registered for GSM modem (1-port)
>>> usbcore: registered new interface driver option
>>> option: USB Driver for GSM modems: v0.7.2
>>> Initializing USB Mass Storage driver...
>>> scsi6 : SCSI emulation for USB Mass Storage devices
>>> usbcore: registered new interface driver usb-storage
>>> USB Mass Storage support registered.
>>> usb-storage: device found at 2
>>> usb-storage: waiting for device to settle before scanning
>>> [drm] Initialized drm 1.1.0 20060810
>>> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>>> pci 0000:00:02.0: setting latency timer to 64
>>> [drm] Initialized i915 1.6.0 20080730 on minor 0
>>> usb-storage: device scan complete
>>> virbr0: no IPv6 routers present
>>> usb 2-3: reset high speed USB device using ehci_hcd and address 2
>>> scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
>>> ANSI: 0 CCS
>>> sd 6:0:0:0: [sdb] Attached SCSI removable disk
>>> sd 6:0:0:0: Attached scsi generic sg2 type 0
>>> CPU0 attaching NULL sched-domain.
>>> CPU1 attaching NULL sched-domain.
>>> CPU0 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 0 1
>>> domain 1: span 0-1 level CPU
>>> groups: 0-1
>>> domain 2: span 0-1 level NODE
>>> groups: 0-1
>>> CPU1 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 1 0
>>> domain 1: span 0-1 level CPU
>>> groups: 0-1
>>> domain 2: span 0-1 level NODE
>>> groups: 0-1
>>> fuse init (API version 7.9)
>>> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>>> CPU0 attaching NULL sched-domain.
>>> CPU1 attaching NULL sched-domain.
>>> CPU0 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 0 1
>>> domain 1: span 0-1 level CPU
>>> groups: 0-1
>>> domain 2: span 0-1 level NODE
>>> groups: 0-1
>>> CPU1 attaching sched-domain:
>>> domain 0: span 0-1 level MC
>>> groups: 1 0
>>> domain 1: span 0-1 level CPU
>>> groups: 0-1
>>> domain 2: span 0-1 level NODE
>>> groups: 0-1
>>> usb 2-2: new high speed USB device using ehci_hcd and address 3
>>> usb 2-2: configuration #1 chosen from 1 choice
>>> usb-storage: device ignored
>>> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
>>> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
>>> usb 2-2: Product: ZTE CDMA Technologies MSM
>>> usb 2-2: Manufacturer: ZTE,Incorporated
>>> usb 2-2: SerialNumber: 1234567890ABCDEF
>>> usb 6-2: new low speed USB device using uhci_hcd and address 2
>>> usb 6-2: configuration #1 chosen from 1 choice
>>> input: PS/2+USB Mouse as
>>> /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input10
>>> input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-2
>>> usb 6-2: New USB device found, idVendor=04f3, idProduct=0210
>>> usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>>> usb 6-2: Product: PS/2+USB Mouse
>>>
>>>
>>>
>>> 2009/3/27 Isamar Maia <isamar em gmail.com>:
>>>> Andre,
>>>>
>>>> Ao espetar o modem, envie o que vem como saida no o comando "dmesg"
>>>> e envie tambem a saida do comando "lsusb"
>>>>
>>>>
>>>> Isamar
>>>>
>>>>
>>>> 2009/3/27 André Maurício <ammvaz em gmail.com>:
>>>>> Alguém ja conseguiu ja conseguiu rodar a internet 3G com o modem ZTE
>>>>> MF 636 (Brasiltelecom) no Fedora 10.
>>>>>
>>>>> Tenho acompanhado algumas listas e alguns usuários do ubuntu ja
>>>>> tiveram sucesso. << http://ubuntuforum-br.org/index.php?topic=46918.0
>>>>>>>
>>>>>
>>>>> Segui os passos indicados mas não nem consegui detectar o modem.
>>>>>
>>>>> Alguma dica?
>>>>>
>>>>> Já falei com a ZTE (China) não tem suporte
>>>>>
>>>>> Estou tentando com um usuário de fedora da Austrália. (A ZTE de lá
>>>>> parece que tem um suporte para linux)
>>>>>
>>>>> Abraços
>>>>>
>>>>> --
>>>>> André Maurício
>>>>>
>>>>> --
>>>>> Fedora-users-br mailing list
>>>>> Fedora-users-br em redhat.com
>>>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Isamar Maia
>>>> Brazil: 55-71-9146-8575
>>>> 55-71-8890-7870
>>>> 日本: +81-(0)3-4550-1212
>>>> "In a world without walls. Who needs windows and gates?"
>>>>
>>>>
>>>> --
>>>> Fedora-users-br mailing list
>>>> Fedora-users-br em redhat.com
>>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> André Maurício
>>> ammvaz em gmail.com
>>> +55 41 9234 3498
>>> (o\ | /o)
>>>
>>>
>>> --
>>> Fedora-users-br mailing list
>>> Fedora-users-br em redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>
>>>
>>
>>
>>
>> --
>> Isamar Maia
>> Brazil: 55-71-9146-8575
>> 55-71-8890-7870
>> 日本: +81-(0)3-4550-1212
>> "In a world without walls. Who needs windows and gates?"
>>
>>
>> --
>> Fedora-users-br mailing list
>> Fedora-users-br em redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>
>>
>
>
> --
> Fedora-users-br mailing list
> Fedora-users-br em redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
>
--
Fedora-users-br mailing list
Fedora-users-br em redhat.com
https://www.redhat.com/mailman/listinfo/fedora-users-br
Mais detalhes sobre a lista de discussão br-users