FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

Tue Sep 10 19:43:24 UTC 2013

>>bash: rpmbuild: command not found

rpmbuild binary is not available, install rpm-build package on your build
machine

;),
im.viji

*Every living being has a potential to become God.*

On Tue, Sep 10, 2013 at 3:31 PM, Radha Venkatesh (radvenka) <
radvenka at cisco.com> wrote:

>  ** **
>
> Thank you. I resolved the below issue by using add-pkg and add-group-pkg.*
> ***
>
> ** **
>
> Still peeling the onion. Finally I have got to the stage where this error
> occurs:****
>
> ** **
>
> koji build --scratch dist-ncs
> packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm****
>
> Uploading srpm:
> packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm****
>
> [====================================] 100% 00:00:00 835.37 KiB   4.70
> MiB/sec****
>
> Created task: 711****
>
> Task info: http://vos-cm20/koji/taskinfo?taskID=711****
>
> Watching tasks (this may be safely interrupted)...****
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free****
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)*
> ***
>
>   712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free****
>
>   712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
> (kojid-1)****
>
>   712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1) ->
> FAILED: BuildError: error building package (arch x86_64), mock exited with
> status 127; see root.log for more information****
>
>   0 free  1 open  0 done  1 failed****
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
> FAILED: BuildError: error building package (arch x86_64), mock exited with
> status 127; see root.log for more information****
>
>   0 free  0 open  0 done  2 failed****
>
> ** **
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed****
>
> ** **
>
> mock_output looks like this****
>
> ** **
>
> ERROR:
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
> Config(dist-ncs-build-41-141) 0 minutes 1 seconds****
>
> INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result**
> **
>
> ERROR: Command failed. See logs for output.****
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']****
>
> ** **
>
> 
> Build.log looks as follows****
>
>  ** **
>
> Executing command: ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG': 'en_US.UTF-8',
> 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME': 'mock',
> 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME': '/builddir', 'PATH':
> '/usr/bin:/bin:/usr/sbin:/sbin'}****
>
> bash: rpmbuild: command not found****
>
> Child return code was: 127****
>
> EXCEPTION: Command failed. See logs for output.****
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']****
>
> Traceback (most recent call last):****
>
>   File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
> line 70, in trace****
>
>     result = func(*args, **kw)****
>
>   File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359, in
> do****
>
>     raise mockbuild.exception.Error, ("Command failed. See logs for
> output.\n # %s" % (command,), child.returncode)****
>
> Error: Command failed. See logs for output.****
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']****
>
> LEAVE do --> EXCEPTION RAISED****
>
> ** **
>
> I have performed all the steps need to execute rpmbuild as a non-root
> user. Still nothing works.****
>
> ** **
>
> Any suggestions?****
>
> ** **
>
> Thanks,****
>
> Radha.****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* buildsys-bounces at lists.fedoraproject.org [mailto:
> buildsys-bounces at lists.fedoraproject.org] *On Behalf Of *Vijay N.
> Majagaonkar
> *Sent:* Friday, September 06, 2013 4:54 PM
> *To:* Discussion of Fedora build system
> *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the install
> failed? in mock_output.log****
>
> ** **
>
> Check where those package available for download, you can see under repo,
> pkglist file should contain those package.****
>
> ** **
>
> On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka) <
> radvenka at cisco.com> wrote:****
>
> Any inputs?****
>
>  ****
>
> *From:* buildsys-bounces at lists.fedoraproject.org [mailto:
> buildsys-bounces at lists.fedoraproject.org] *On Behalf Of *Radha Venkatesh
> (radvenka)
> *Sent:* Friday, September 06, 2013 10:49 AM****
>
>
> *To:* Discussion of Fedora build system****
>
> *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the install
> failed? in mock_output.log****
>
>  ****
>
> I have done that already. For libk5crypto.so, I have imported ****
>
>  ****
>
> [kojiadmin at vos-cm20 root]$ koji import
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_****
>
> 64.rpm****
>
> uploading
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
> done****
>
> importing
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
> done****
>
>  ****
>
> [kojiadmin at vos-cm20 root]$ koji import
> /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm ****
>
> RPM already imported:
> /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm****
>
> Skipping import****
>
>  ****
>
> But the error still persists.****
>
>  ****
>
> *From:* buildsys-bounces at lists.fedoraproject.org [mailto:
> buildsys-bounces at lists.fedoraproject.org] *On Behalf Of *Vijay N.
> Majagaonkar
> *Sent:* Friday, September 06, 2013 10:24 AM
> *To:* Discussion of Fedora build system
> *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the install
> failed? in mock_output.log****
>
>  ****
>
>
> DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
> DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)****
>
>   ****
>
> yum provides '*/libk5crypto.so' ****
>
>  ****
>
> DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
> DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
> DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
> DEBUG util.py:264:             Requires: /sbin/install-info****
>
>   ****
>
> yum provides '*/install-info' ****
>
>  ****
>
> Yum provides gives you package name and import that package into koji,
> that should fix problem of missing package.****
>
>  ****
>
>  ****
>
>
> --
> buildsys mailing list
> buildsys at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/buildsys****
>
> ** **
>
> --
> buildsys mailing list
> buildsys at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/buildsys
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/buildsys/attachments/20130910/310aaf43/attachment-0001.html>