FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

Mike Bonnet mikeb at redhat.com
Tue Sep 10 20:21:23 UTC 2013 

On 9/10/13 12:31 PM, Radha Venkatesh (radvenka) wrote:
> Thank you. I resolved the below issue by using add-pkg and add-group-pkg.
>
> Still peeling the onion. Finally I have got to the stage where this
> error occurs:
>
> koji build --scratch dist-ncs
> packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
> Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
> [====================================] 100% 00:00:00 835.37 KiB   4.70
> MiB/sec
>
> Created task: 711
>
> Task info: http://vos-cm20/koji/taskinfo?taskID=711
>
> Watching tasks (this may be safely interrupted)...
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
> (kojid-1)
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1)
> -> FAILED: BuildError: error building package (arch x86_64), mock exited
> with status 127; see root.log for more information
>
>    0 free  1 open  0 done  1 failed
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
> FAILED: BuildError: error building package (arch x86_64), mock exited
> with status 127; see root.log for more information
>
>    0 free  0 open  0 done  2 failed
>
> 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed
>
> mock_output looks like this
>
> ERROR:
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
> Config(dist-ncs-build-41-141) 0 minutes 1 seconds
>
> INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
>
> ERROR: Command failed. See logs for output.
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']
>
> Build.log looks as follows
>
> Executing command: ['bash', '--login', '-c', 'rpmbuild -bs --target
> x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
> 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME':
> 'mock', 'PROMPT_COMMAND': 'echo -n "<mock-chroot>"', 'HOME':
> '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
>
> bash: rpmbuild: command not found
>
> Child return code was: 127
>
> EXCEPTION: Command failed. See logs for output.
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']
>
> Traceback (most recent call last):
>
>    File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
> line 70, in trace
>
>      result = func(*args, **kw)
>
>    File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359,
> in do
>
>      raise mockbuild.exception.Error, ("Command failed. See logs for
> output.\n # %s" % (command,), child.returncode)
>
> Error: Command failed. See logs for output.
>
> # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64 --nodeps
> builddir/build/SPECS/bzip2.spec']
>
> LEAVE do --> EXCEPTION RAISED
>
> I have performed all the steps need to execute rpmbuild as a non-root
> user. Still nothing works.
>
> Any suggestions?

That means the rpmbuild command is not available in the chroot that Koji 
is creating for the build.  You should run:

koji add-group-pkg dist-ncs-build build rpm-build

which causes the rpm-build package to be included as part of the "build" 
comps group for the dist-ncs-build tag.  The "build" comps group is what 
is used to populate the chroots used to perform builds.

> Thanks,
>
> Radha.
>
> *From:*buildsys-bounces at lists.fedoraproject.org
> [mailto:buildsys-bounces at lists.fedoraproject.org] *On Behalf Of *Vijay
> N. Majagaonkar
> *Sent:* Friday, September 06, 2013 4:54 PM
> *To:* Discussion of Fedora build system
> *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
> install failed? in mock_output.log
>
> Check where those package available for download, you can see under
> repo, pkglist file should contain those package.
>
> On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka)
> <radvenka at cisco.com <mailto:radvenka at cisco.com>> wrote:
>
> Any inputs?
>
> *From:*buildsys-bounces at lists.fedoraproject.org
> <mailto:buildsys-bounces at lists.fedoraproject.org>
> [mailto:buildsys-bounces at lists.fedoraproject.org
> <mailto:buildsys-bounces at lists.fedoraproject.org>] *On Behalf Of *Radha
> Venkatesh (radvenka)
> *Sent:* Friday, September 06, 2013 10:49 AM
>
>
> *To:* Discussion of Fedora build system
>
> *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the
> install failed? in mock_output.log
>
> I have done that already. For libk5crypto.so, I have imported
>
> [kojiadmin at vos-cm20 root]$ koji import
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
>
> 64.rpm
>
> uploading
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
> importing
> /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
> [kojiadmin at vos-cm20 root]$ koji import
> /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
> RPM already imported:
> /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
> Skipping import
>
> But the error still persists.
>
> *From:*buildsys-bounces at lists.fedoraproject.org
> <mailto:buildsys-bounces at lists.fedoraproject.org>
> [mailto:buildsys-bounces at lists.fedoraproject.org
> <mailto:buildsys-bounces at lists.fedoraproject.org>] *On Behalf Of *Vijay
> N. Majagaonkar
> *Sent:* Friday, September 06, 2013 10:24 AM
> *To:* Discussion of Fedora build system
> *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
> install failed? in mock_output.log
>
>
>     DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>     DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>
> ​yum provides '*/libk5crypto.so' ​
>
>     DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
>     DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>     DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>     DEBUG util.py:264:             Requires: /sbin/install-info
>
> ​​yum provides '*/install-info' ​​
>
> ​Yum provides gives you package name and import that package into koji,
> that should fix problem of missing package.​
>
>
> --
> buildsys mailing list
> buildsys at lists.fedoraproject.org <mailto:buildsys at lists.fedoraproject.org>
> https://admin.fedoraproject.org/mailman/listinfo/buildsys
>
>
>
> --
> buildsys mailing list
> buildsys at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

More information about the buildsys mailing list