Firewire PCMCIA problems on FC3

Keven Ring keven at mitre.org
Mon Apr 25 13:22:47 UTC 2005


I have a Belkin Firewire PCMCIA card that is recognized correctly (and 
works!) on FC1.  However, the same card does not work on FC3 (I'm 
currently running the 2.6.11-1.14_FC3 kernel).

I have attached the output of /var/log/messages for both FC1 and FC3 
below.  Any help is appreciated in getting this working on FC3!

TIA!

[begin FC1 /var/log/messages]
Apr 25 07:57:41 localhost kernel: cs: cb_alloc(bus 3): vendor 0x1033, 
device 0x00cd
Apr 25 07:57:41 localhost kernel: PCI: Enabling device 03:00.0 (0000 -> 
0002)
Apr 25 07:57:41 localhost cardmgr[3372]: socket 0: CardBus hotplug device
Apr 25 07:57:41 localhost kernel: ohci1394: $Rev: 1010 $ Ben Collins 
<bcollins at debian.org>
Apr 25 07:57:41 localhost kernel: ohci1394_0: Unexpected PCI resource 
length of 1000!
Apr 25 07:57:41 localhost kernel: ohci1394_0: OHCI-1394 1.0 (PCI): 
IRQ=[11]  MMIO=[40800000-408007ff]  Max Packet=[1024]
Apr 25 07:57:41 localhost devlabel: devlabel service started/restarted
Apr 25 07:59:05 localhost kernel: spurious 8259A interrupt: IRQ7.
Apr 25 07:59:05 localhost kernel: sbp2: $Rev: 1010 $ Ben Collins 
<bcollins at debian.org>
Apr 25 07:59:06 localhost kernel: scsi2 : SCSI emulation for IEEE-1394 
SBP-2 Devices
Apr 25 07:59:06 localhost kernel: blk: queue ef45c814, I/O limit 0Mb 
(mask 0x0)
Apr 25 07:59:06 localhost kernel: ieee1394: sbp2: Error logging into 
SBP-2 device - login failed
Apr 25 07:59:06 localhost devlabel: devlabel service started/restarted
Apr 25 08:02:11 localhost kernel:   Vendor: Apple     Model: 
iPod              Rev: 1.50
Apr 25 08:02:11 localhost kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 02
Apr 25 08:02:11 localhost kernel: blk: queue ef45c614, I/O limit 0Mb 
(mask 0x0)
Apr 25 08:02:11 localhost kernel: Attached scsi removable disk sdb at 
scsi2, channel 0, id 0, lun 0
Apr 25 08:02:11 localhost kernel: SCSI device sdb: 39063024 512-byte 
hdwr sectors (20000 MB)
Apr 25 08:02:11 localhost kernel: sdb: test WP failed, assume Write Enabled
Apr 25 08:02:11 localhost kernel:  sdb: sdb1 sdb2
[end FC1 /var/log/messages]

[begin FC3 /var/log/messages]
Apr 25 09:17:51 mm124141-pc kernel: ohci1394: $Rev: 1223 $ Ben Collins 
<bcollins at debian.org>
Apr 25 09:17:51 mm124141-pc kernel: PCI: Enabling device 0000:03:00.0 
(0000 -> 0002)
Apr 25 09:17:51 mm124141-pc kernel: ACPI: PCI interrupt 0000:03:00.0[A] 
-> GSI 11 (level, low) -> IRQ 11
Apr 25 09:17:52 mm124141-pc kernel: ohci1394: fw-host0: Unexpected PCI 
resource length of 1000!
Apr 25 09:17:52 mm124141-pc kernel: ohci1394: fw-host0: OHCI-1394 1.0 
(PCI): IRQ=[11]  MMIO=[40800000-408007ff]  Max Packet=[1024]
Apr 25 09:17:52 mm124141-pc ieee1394.agent[6512]: ... no drivers for 
IEEE1394 product 0x/0x/0x
Apr 25 09:17:53 mm124141-pc ieee1394.agent[6534]: ... no drivers for 
IEEE1394 product 0x/0x/0x
Apr 25 09:17:53 mm124141-pc ieee1394.agent[6561]: ... no drivers for 
IEEE1394 product 0x/0x/0x
[end FC3 /var/log/messages]
-------------- next part --------------
A non-text attachment was scrubbed...
Name: keven.vcf
Type: text/x-vcard
Size: 301 bytes
Desc: not available
Url : http://lists.fedoraproject.org/pipermail/devel/attachments/20050425/bcfcb1bd/attachment-0002.vcf 


More information about the devel mailing list