USB card reader gone again

Paul paul at all-the-johnsons.co.uk
Fri Mar 11 20:48:51 UTC 2005


Hi,

>  > /sbin/mkinitrd -f /boot/initrd-2.6.11-1.1177_FC4 /boot/2.6.11-1.1177_FC4
> 
> With the FC4 kernels you shouldn't need to do any of this.
> We now scan all LUNs by default.

Neat!

>  > Any ideas on how to get this working again or should I bugzilla it? It
>  > has worked in the past.
>  
> dmesg output would be useful.

Here it is.

Linux version 2.6.11-1.1177_FC4 (bhcompile at bugs.build.redhat.com) (gcc
version 4.0.0 20050302 (Red Hat 4.0.0-0.31)) #1 Tue Mar 8 17:32:31 EST
2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia                                ) @ 0x000f6a70
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x3fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c045a000 soft=c0459000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1663.838 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033028k/1048512k available (2528k kernel code, 14708k reserved,
688k data, 184k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 3293.18 BogoMIPS (lpj=1646592)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f3f7 c1cbfbff 00000000 00000020 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Sempron(tm)   2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e20)
checking if image is initramfs... it is
Freeing initrd memory: 965k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaab0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas at hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved
pnp: 00:01: ioport range 0x2000-0x203f has been reserved
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1110572046.192:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E69E6B4890A9DEBB
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] Initialized drm 1.0.0 20040925
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HDS722580VLAT20, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
hdd: COMBO-52X16C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT370A: IDE controller at PCI slot 0000:01:08.0
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 10 (level, low) -> IRQ 10
HPT370A: chipset revision 4
HPT37X: using 33MHz PCI clock
HPT370A: 100% native mode on irq 10
    ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:DMA, hdh:DMA
Probing IDE interface ide2...
hde: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdf: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
ide2 at 0xa800-0xa807,0xac02 on irq 10
Probing IDE interface ide3...
hdg: Maxtor 6Y120L0, ATA DISK drive
hdh: Maxtor 6Y120L0, ATA DISK drive
ide3 at 0xb000-0xb007,0xb402 on irq 10
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: Host Protected Area detected.
	current capacity is 160834367 sectors (82347 MB)
	native  capacity is 160836480 sectors (82348 MB)
hda: Host Protected Area disabled.
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(133)
hdb: cache flushes supported
 hdb: hdb1 hdb2
hdg: max request size: 128KiB
hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hdg: cache flushes supported
 hdg: hdg1 hdg2
hdh: max request size: 128KiB
hdh: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hdh: cache flushes supported
 hdh: hdh1
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
hdf: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
ide-floppy driver 0.99.newide
hde: No disk in drive
hde: 0kB, 0/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 184k freed
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ahc_pci:1:9:0: Host Adapter Bios disabled.  Using default SCSI device
parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2902/04/10/15/20C/30C SCSI adapter>
        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 687450
ext3_orphan_cleanup: deleting unreferenced inode 688864
EXT3-fs: hda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 5 roles, 583 types, 60 bools
security:  54 classes, 70968 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for
labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for
labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses
genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xc000, 00:0f:ea:54:48:15, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49314 usecs
intel8x0: clocking to 47500
gameport: pci0000:01:07.1 speed 877 kHz
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 9 (level, low) -> IRQ 9
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 9, latency: 32, mmio:
0xd8000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio
mode=simple
msp3410: daemon started
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9885/6/7: chip found @ 0x96
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: microtune: companycode=3cbf part=42 rev=2f
tuner: microtune MT2050 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 9 (level, low) -> IRQ 9
bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 9, latency: 32, memory:
0xd8001000
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 10, pci mem 0xdd004000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem 0xdd002000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem 0xdd003000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:01:07.2[B] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
MMIO=[dc004000-dc0047ff]  Max Packet=[2048]
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: device descriptor read/64, error -110
usb 3-2: device descriptor read/64, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 4
usb 3-2: device descriptor read/64, error -110
ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00023c00210900fa]
usb 3-2: device descriptor read/64, error -110
ACPI: Power Button (FF) [PWRF]
usb 3-2: new full speed USB device using ohci_hcd and address 5
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 3-2: device not accepting address 5, error -110
cdrom: open failed.
hde: No disk in drive
usb 3-2: new full speed USB device using ohci_hcd and address 6
cdrom: open failed.
cdrom: open failed.
usb 3-2: device not accepting address 6, error -110
usb 3-3: new full speed USB device using ohci_hcd and address 7
EXT3 FS on hda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb1, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb2, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdg1, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdg2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdg2, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdh1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdh1, type ext3), uses xattr
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
audit(1110572085.251:0): avc:  denied  { read } for  pid=1476
exe=/sbin/ifconfig path=/init dev=rootfs ino=12
scontext=user_u:system_r:ifconfig_t tcontext=system_u:object_r:root_t
tclass=file
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03e9640(lo)
IPv6 over IPv4 tunneling driver
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
alt 0 proto 2 vid 0x03F0 pid 0x3004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
audit(1110572105.287:0): avc:  denied  { execmod } for  pid=1477 comm=X
path=/usr/lib/tls/libnvidia-tls.so.1.0.6629 dev=hda5 ino=265639
scontext=user_u:system_r:initrc_t tcontext=system_u:object_r:lib_t
tclass=file
audit(1110572105.885:0): avc:  denied  { execmod } for  pid=1477 comm=X
path=/usr/X11R6/lib/modules/extensions/libglx.so.1.0.6629 dev=hda5
ino=3205226 scontext=user_u:system_r:initrc_t
tcontext=root:object_r:lib_t tclass=file
Adding 294904k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
Adding 1566328k swap on /dev/hda3.  Priority:-2 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 272 bytes per
conntrack
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
audit(1110572117.067:0): avc:  denied  { read } for  pid=3432
exe=/sbin/dhclient name=dhclient-eth0.leases dev=hda1 ino=1750855
scontext=user_u:system_r:dhcpc_t tcontext=system_u:object_r:var_lib_t
tclass=file
audit(1110572117.067:0): avc:  denied  { write } for  pid=3432
exe=/sbin/dhclient name=dhclient-eth0.leases dev=hda1 ino=1750855
scontext=user_u:system_r:dhcpc_t tcontext=system_u:object_r:var_lib_t
tclass=file
audit(1110572117.068:0): avc:  denied  { getattr } for  pid=3432
exe=/sbin/dhclient path=/var/lib/dhcp/dhclient-eth0.leases dev=hda1
ino=1750855 scontext=user_u:system_r:dhcpc_t
tcontext=system_u:object_r:var_lib_t tclass=file
audit(1110572117.070:0): avc:  denied  { read } for  pid=3433
exe=/bin/bash name=libtermcap.so.2.0.8 dev=hda1 ino=686937
scontext=user_u:system_r:dhcpc_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572117.070:0): avc:  denied  { getattr } for  pid=3433
exe=/bin/bash path=/lib/libtermcap.so.2.0.8 dev=hda1 ino=686937
scontext=user_u:system_r:dhcpc_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572117.070:0): avc:  denied  { execute } for  pid=3433
comm=dhclient-script path=/lib/libtermcap.so.2.0.8 dev=hda1 ino=686937
scontext=user_u:system_r:dhcpc_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572121.389:0): avc:  denied  { append } for  pid=3520
exe=/sbin/syslogd name=messages dev=hda1 ino=1750996
scontext=user_u:system_r:syslogd_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572121.389:0): avc:  denied  { ioctl } for  pid=3520
exe=/sbin/syslogd path=/var/log/messages dev=hda1 ino=1750996
scontext=user_u:system_r:syslogd_t tcontext=system_u:object_r:file_t
tclass=file
eth0: no IPv6 routers present
audit(1110572129.254:0): avc:  denied  { read write } for  pid=3697
exe=/usr/sbin/cupsd name=error_log dev=hda1 ino=1750992
scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572129.254:0): avc:  denied  { setattr } for  pid=3697
exe=/usr/sbin/cupsd name=error_log dev=hda1 ino=1750992
scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572129.679:0): avc:  denied  { getattr } for  pid=3698
exe=/bin/bash path=/lib/libtermcap.so.2.0.8 dev=hda1 ino=686937
scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t
tclass=file
audit(1110572129.679:0): avc:  denied  { execute } for  pid=3698 comm=sh
path=/lib/libtermcap.so.2.0.8 dev=hda1 ino=686937
scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t
tclass=file
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
usb 3-3: reset full speed USB device using ohci_hcd and address 7
usb 3-3: hald timed out on ep0in
usb 3-3: hald timed out on ep0in
usb 3-3: hald timed out on ep0in
scsi: Device offlined - not ready after error recovery: host 1 channel 0
id 0 lun 0
usb-storage: device scan complete
usb 3-3: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6
len 2 ret -110
usb 3-3: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6
len 2 ret -110
usb 3-3: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6
len 2 ret -110
usb 3-3: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6
len 2 ret -110

One other odd thing is that if I double click on the "computer" icon,
none of my CD, DVD or Zip drives show and inserting a disc into the
drive is not auto-mounting, so the problem may be elsewhere.

TTFN

Paul
-- 
"I like blinking me" - Helen, Big Brother 2 contestant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.fedoraproject.org/pipermail/devel/attachments/20050311/a625c44e/attachment-0002.bin 


More information about the devel mailing list