udev 0.75-2 slow?

Tom London selinux at gmail.com
Wed Nov 16 22:43:21 UTC 2005


On 11/16/05, Dennis Jacobfeuerborn <d.jacobfeuerborn at conversis.de> wrote:
> udev hangs for me too on boot but only for about 10 seconds. What is more
> of a problem though is the fact my "eth1" device apparently now is called
> "dev18685". Here is what systool has to say about the device:
>
>    Class Device = "dev18685"
>    Class Device path = "/sys/class/net/dev18685"
>      addr_len            = "6"
>      address             = "00:04:61:4a:12:1f"
>      broadcast           = "ff:ff:ff:ff:ff:ff"
>      features            = "0x0"
>      flags               = "0x1002"
>      ifindex             = "2"
>      iflink              = "2"
>      mtu                 = "1500"
>      tx_queue_len        = "1000"
>      type                = "1"
>      uevent              = <store method only>
>      weight              = "0"
>
>      Device = "0000:00:04.0"
>      Device path = "/sys/devices/pci0000:00/0000:00:04.0"
>        class               = "0x020000"
>        config              =  de 10 66 00 07 00 b0 00  a1 00 00 02 00 00 00 00
>                               00 00 00 ec 01 ec 00 00  00 00 00 00 00 00 00 00
>                               00 00 00 00 00 00 00 00  00 00 00 00 95 16 00 10
>                               00 00 00 00 44 00 00 00  00 00 00 00 0a 01 01 14
>        device              = "0x0066"
>        irq                 = "10"
>        local_cpus          = "1"
>        modalias            =
> "pci:v000010DEd00000066sv00001695sd00001000bc02sc00i00"
>        resource            = "0x00000000ec000000 0x00000000ec000fff
> 0x0000000000000200
> 0x000000000000ec00 0x000000000000ec07 0x0000000000000101
> 0x0000000000000000 0x0000000000000000 0x0000000000000000
> 0x0000000000000000 0x0000000000000000 0x0000000000000000
> 0x0000000000000000 0x0000000000000000 0x0000000000000000
> 0x0000000000000000 0x0000000000000000 0x0000000000000000
> 0x0000000000000000 0x0000000000000000 0x0000000000000000"
>        subsystem_device    = "0x1000"
>        subsystem_vendor    = "0x1695"
>        uevent              = <store method only>
>        vendor              = "0x10de"
>
> Regards,
>    Dennis
>
> Bojan Smojver wrote:
> > Not sure if this is just my system, but the new version of udev appears
> > to be taking a few minutes to do its bit on boot. Did anyone else notice
> > this kind of behaviour?
> >
>

Hmm, I hadn't noticed, but udev apparently renamed my NICs.
Prior to today: wired NIC was eth0, wireless NIC was eth1,
now
wired NIC is eth1, wireless is eth0.

tom
--
Tom London




More information about the devel mailing list