rawhide report: 20070401 changes

Miles Lane miles.lane at gmail.com
Mon Apr 2 04:28:56 UTC 2007


On 4/1/07, Miles Lane <miles.lane at gmail.com> wrote:
> 1.  The ipw2200 signal kill switch is not working.  That is, pressing
> it does not toggle the kill switch state.  I know that the switch is
> not defective, so maybe this is a SELinux issue?
>
> 2.  I added "options ipw2200 led=1" to /etc/modprobe.conf.  This
> causes the LED on the kill switch to light up when the WIFI signal is
> enabled.  This is working, although it seems to me that this should be
> the default behavior (preferably built into the ipw2200 driver).  If
> we aren't going to get this changed in the driver, I recommend we put
> this option in modprobe.conf by default, so that the LED "just works"
> as expected.
>
> 3.  Since I have enabled the kill switch LED, I notice that when I
> boot, from very early on in the boot process the LED starts blinking.
> That is, it flashes about once every three seconds.  It appears to me
> that some process is repeatedly trying to get a working wireless
> connection.  Since I am using NetworkManager, it seems like a bug that
> this is happening.  Shouldn't the initscripts be smart enough to know
> when I am using NM to control the wireless connection and leave it
> alone until NM starts?
>
> 4.  I tried suspend/resume, but it seems only the suspend worked.
> When I tried to resume, the drive spun up and my capslock LED light
> would toggle, but I never got back to the screensaver or GDM.

Oops.  I should give my hardware configuration:

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated
Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG
Network Connection (rev 05)
01:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE
1394 Host Controller
01:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
01:09.4 Class 0805: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller

Here's dmesg output, minus all the "PM: Adding info..." lines:

Linux version 2.6.20-1.3038.fc7
(brewbuilder at hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20070327
(Red Hat 4.1.2-7)) #1 SMP Sat Mar 31 19:51:12 EDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end:
000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000ce000 size: 0000000000002000 end:
00000000000d0000 type: 2
copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003dde0000 end:
000000003dee0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003dee0000 size: 000000000000c000 end:
000000003deec000 type: 3
copy_e820_map() start: 000000003deec000 size: 0000000000014000 end:
000000003df00000 type: 4
copy_e820_map() start: 000000003df00000 size: 0000000002100000 end:
0000000040000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end:
00000000fec10000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end:
00000000fee01000 type: 2
copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end:
00000000ffc00000 type: 2
copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end:
0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003dee0000 (usable)
 BIOS-e820: 000000003dee0000 - 000000003deec000 (ACPI data)
 BIOS-e820: 000000003deec000 - 000000003df00000 (ACPI NVS)
 BIOS-e820: 000000003df00000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
94MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7e30
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 253664) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   253664
early_node_map[1] active PFN ranges
    0:        0 ->   253664
On node 0 totalpages: 253664
  DMA zone: 52 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4044 pages, LIFO batch:0
  Normal zone: 2860 pages used for memmap
  Normal zone: 222420 pages, LIFO batch:31
  HighMem zone: 308 pages used for memmap
  HighMem zone: 23980 pages, LIFO batch:3
DMI present.
Using APIC driver default
ACPI: RSDP 000F7E00, 0014 (r0 HP    )
ACPI: RSDT 3DEE76BB, 0040 (r1 HP     09B8      6040000  LTP        0)
ACPI: FACP 3DEEBE8C, 0074 (r1 HP     09B8      6040000 PTL        50)
ACPI: DSDT 3DEE7B9A, 42F2 (r1 HP     09B8      6040000 MSFT  100000E)
ACPI: FACS 3DEFCFC0, 0040
ACPI: HPET 3DEEBF00, 0038 (r1 HP     09B8      6040000 PTL         0)
ACPI: APIC 3DEEBF38, 005A (r1 HP     09B8      6040000 PTL        50)
ACPI: APIC 3DEEBF92, 0046 (r1 HP     09B8      6040000 PTL         0)
ACPI: BOOT 3DEEBFD8, 0028 (r1 HP     09B8      6040000  LTP        1)
ACPI: SSDT 3DEE7AFE, 009C (r1 HP     09B8            1 INTL 20030224)
ACPI: SSDT 3DEE76FB, 0277 (r1 HP     09B8         2000 INTL 20030224)
ACPI: BIOS bug: multiple APIC/MADT found, using 2
ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi at vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
CPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists.  Total pages: 250444
Kernel command line: root=UUID=9652caef-4d29-4b1e-a511-3ac0608e403b
pci=assign-busses vga=0x27e selinux=1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c079e000 soft=c077e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1695.866 MHz processor.
Console: colour dummy device 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1096 kB
 per task-struct memory footprint: 1200 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 990960k/1014656k available (2147k kernel code, 23028k
reserved, 1139k data, 248k init, 97152k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc073b000 - 0xc0779000   ( 248 kB)
      .data : 0xc0618d4d - 0xc0735cb4   (1139 kB)
      .text : 0xc0400000 - 0xc0618d4d   (2147 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3393.15 BogoMIPS (lpj=1696578)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f3bf 00000000 00000000 00002040
00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Total of 1 processors activated (3393.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=52 bytes
sizeof(inode)=564 bytes
sizeof(dentry)=156 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=2704 bytes
Time: 20:48:53  Date: 03/01/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
0000:00:1f.1: trying to change BAR2 from 0000 to 0170
0000:00:1f.1: trying to change BAR3 from 0000 to 0374
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *4)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *4)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 7 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
Time: tsc clocksource has been installed.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:09.0
  IO window: 00003400-000034ff
  IO window: 00003800-000038ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 58000000-5bffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: e0200000-e02fffff
  PREFETCH window: 50000000-53ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 20 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2777k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1175460537.770:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key CB47D3A6B6031EC9
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
PM: Adding info for platform:vesafb.0
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 7680k,
total 32576k
vesafb: mode is 1280x768x32, linelength=5120, pages=7
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x48
fb0: VESA VGA frame buffer device
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Clocksource tsc unstable (delta = -470506787 ns)
ACPI: Thermal Zone [THRM] (58 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 32636K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:01:09.0 [103c:3080]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:09.0, mfunc 0x01a01b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 3:969:850
Freeing unused kernel memory: 248k freed
Write protecting the kernel read-only data: 846k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
hub 2-0:1.0: 2 ports detected
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.20 loaded.
ata_piix 0000:00:1f.1: version 2.10ac1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
scsi0 : ata_piix
ata1.00: ATA-6: FUJITSU MHU2100AT, 00000008, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHU2100A 0000 PQ: 0 ANSI: 5
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4080N 0S35 PQ: 0 ANSI: 5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1175460549.260:2): enforcing=1 old_enforcing=0 auid=4294967295
security:  3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats
security:  60 classes, 63835 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda6, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1175460550.259:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
intel_rng: FWH not detected
input: PC Speaker as /class/input/input3
iTCO_vendor_support: vendor-support=0
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:01 failed with error -16
ieee80211_crypt: registered algorithm 'NULL'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:01:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:00.0: Try the "8139too" driver instead.
ACPI: PCI Interrupt 0000:01:09.2[C] -> GSI 22 (level, low) -> IRQ 22
fw_ohci: Added fw-ohci device 0000:01:09.2, OHCI version 1.10
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xf9130800, 00:c0:9f:95:18:1b, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 18 (level, low) -> IRQ 20
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
fw_core: created new fw device fw0 (0 config rom retries)
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
sdhci: SDHCI controller found at 0000:01:09.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:01:09.4[A] -> GSI 20 (level, low) -> IRQ 16
mmc0: SDHCI at 0xe0208400 irq 16 DMA
mmc1: SDHCI at 0xe0208000 irq 16 DMA
mmc2: SDHCI at 0xe0207c00 irq 16 DMA
ACPI: PCI Interrupt 0000:01:09.3[A] -> GSI 20 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 0 converters and GPIO not ready (0x1)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50529 usecs
intel8x0: clocking to 48000
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
No dock devices found.
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
EXT3 FS on sda6, internal journal
SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda7, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda11, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda9, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1052216k swap on /dev/sda8.  Priority:-1 extents:1 across:1052216k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.default.retrans_time; Use
net.ipv6.neigh.default.retrans_time_ms instead.
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
audit(1175485831.459:4): audit_pid=2068 old=0 by auid=4294967295
subj=system_u:system_r:auditd_t:s0
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[drm] Initialized i915 1.6.0 20060119 on minor 0
[drm] Initialized i915 1.6.0 20060119 on minor 1
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211_crypt: registered algorithm 'WEP'
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present




More information about the devel mailing list