rt2x00 is getting better :-)

[Rafael Espíndola]

I have recently upgrade the kernel to 3094 and I the wifi with wpa now
works for a few seconds :-)

wpa_supplicant works, dhclient works, I am able to open a page or two
and then the network stops. dmesg shows:



Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com.
Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
usbcore: registered new interface driver rt73usb
Loading module: rt2500usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
usbcore: registered new interface driver rt2500usb
wmaster0: Selected rate control algorithm 'simple'
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:10:18:90:20:db
wlan0: RX authentication from 00:10:18:90:20:db (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:10:18:90:20:db
wlan0: RX AssocResp from 00:10:18:90:20:db (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: duplicate address detected!
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x06 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_bbp_read: Error - PHY_CSR3 register busy. Read failed.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x06 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x06 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_bbp_read: Error - PHY_CSR3 register busy. Read failed.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x07 failed for offset 0x308c with error -110.
rt73usb->rt2x00_vendor_request: Error - vendor request error. Request
0x06 failed for offset 0x308c with error -110.
wlan0: No ProbeResp from current AP 00:10:18:90:20:db - assume out of range



Thanks,
Rafael