ixgbe/udev mystery
Thomas Bendler
ml at bendler-net.de
Fri Mar 25 16:17:12 UTC 2011
2011/3/25 Andy Gospodarek <gospo at redhat.com>
> [...]
> Your devices are not showing up because the driver is failing to load.
>
That is one strange thing, modprobe didn't report any error and you can see
the driver in the lsmod list.
> Erroe -15 is IXGBE_ERR_RESET_FAILED, so it seems there is either
> something wrong with your cards of you are hitting a driver bug.
>
>From time to time the card come up (after changes in
/etc/udev/rules.d/70-*net*) and I get errors like:
[ 234.127257] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 0 not cleared within the polling period
[ 234.132529] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 1 not cleared within the polling period
[ 234.136400] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 2 not cleared within the polling period
[ 234.140396] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 3 not cleared within the polling period
[ 234.144402] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 4 not cleared within the polling period
[ 234.148405] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 5 not cleared within the polling period
[ 234.152408] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 6 not cleared within the polling period
[ 234.156408] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx
queue 7 not cleared within the polling period
[ 234.212147] ixgbe: eth2: ixgbe_watchdog_link_is_up: NIC Link is Up 10
Gbps, Flow Control: RX/TX
When I try to set an IP adress.
You should probably turn on dynamic debugging for the ixgbe module and
> see if you can figure out what might be going wrong. A guide for using
> dynamic debugging can be found in Documentation/dynamic-debug-howto.txt.
>
I'm already struggeling with the debugfs, sorry but I need a documentation
that a system administrator can understand :).
One remark, the error occured with the standard ixgbe module (2.0.62-k2), so
I upgraded the module to the latest version (3.2.10-NAPI) but still have the
same error.
Regards, Thomas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/devel/attachments/20110325/a4a03693/attachment-0001.html
More information about the devel
mailing list