[linux-sunxi] Re: Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support

[Hans de Goede]

Hi,

On 09/19/2013 03:47 PM, davide.soldan.kynetics at gmail.com wrote:
> Hi Hans,
> I'm having a problem testing your fedora 19 remix on Olinuxino a10s.
> The board boot well, and I can login from the serial port, but Xorg crashes with these outputs:
> at boot: http://pastebin.com/PEZf9eKq
> after boot if I login and try startx: http://pastebin.com/HateKEi8
> the board/sdcard/hdmi cable works well as I can run the base debian distro from olimex with the same components.
> Also the various script.bin, uImage ecc should be ok as I checked that were the one's for sun5i.
> Can you help me with this problem?

Yes, there was an error in the fex / script.bin file for the Olinuxino a10s causing it
to not send video to the hdmi output with Fedora 19 ARM remix for Allwinner SOCs release 1.

This is fixed in release 2, but in release 2 I ended up picking a bad u-boot snapshot (and
doing a bad QA job as well), so that one does not boot on sun5i devices at all.

Attached is a good script.bin for the Olinuxino a10s, if you drop this in the u-boot
partition of your sdcard the hdmi out should work.

Regards,

Hans
-------------- next part --------------
A non-text attachment was scrubbed...
Name: script.bin
Type: application/octet-stream
Size: 37640 bytes
Desc: not available
URL: <http://lists.fedoraproject.org/pipermail/devel/attachments/20131010/7146d850/attachment-0001.bin>