[linux-sunxi] Re: Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with A20 support

[Hans de Goede]

Hi,

On 09/12/2013 04:27 PM, hmandevteam at gmail.com wrote:
> Hi Hans,
> i tryed to use your fedora 19 remix on my Olinuxino A20 Rev.D but don't start,
> there is only red and green leds power on static (no blink) but i have always hdmi signal off (i verified that script is for hdmi).

Have you tried hooking up the uart to a serial port / usb <-> serial convertor too
see if there are any kernel boot messages?

Various people have been successfully using the image with hdmi out on the Olinuxino A20 Rev.D,
without any issues. How are you powering the board ? Note that the board has an onboard
regulator, so it needs 6V as a minimum input voltage. Also try replacing the sdcard and the
hdmi cable. If that all fails, try another Linux distro, ie olimex's official images,
if that fails too, it could be your board is broken.

Regards,

Hans