Fri Apr 30 04:37:30 UTC 2010

en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml |    2 
 en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-7.xml |   10 
 en-US/Adding_Partitions-section-2-itemizedlist-1.xml            |    4 
 en-US/Adding_Partitions-x86.xml                                 |    7 
 en-US/Adding_Partitions_x86_ppc-listitem-7.xml                  |   10 
 en-US/Create_LVM-common-important-1.xml                         |   10 
 en-US/Create_LVM-common-para-1.xml                              |    7 
 en-US/Create_LVM-common-para-2.xml                              |    7 
 en-US/Create_LVM-common-title-1.xml                             |    8 
 en-US/Create_LVM-common-variablelist-1.xml                      |   54 +++++
 en-US/Create_LVM-x86.xml                                        |   45 ++++
 en-US/Create_Software_RAID-common-para-1.xml                    |    9 
 en-US/Create_Software_RAID-common-para-2.xml                    |    9 
 en-US/Create_Software_RAID-common-title-1.xml                   |    8 
 en-US/Create_Software_RAID-common-variablelist-1.xml            |   99 +++++++++
 en-US/Create_Software_RAID-x86.xml                              |   42 +++
 en-US/Create_Storage-common-figure-1.xml                        |   14 +
 en-US/Create_Storage-common-itemizedlist-1.xml                  |   17 +
 en-US/Create_Storage-common-itemizedlist-2.xml                  |   27 ++
 en-US/Create_Storage-common-itemizedlist-3.xml                  |   27 ++
 en-US/Create_Storage-common-listitem-1.xml                      |   13 +
 en-US/Create_Storage-common-listitem-2.xml                      |   10 
 en-US/Create_Storage-common-listitem-3.xml                      |   10 
 en-US/Create_Storage-common-listitem-4.xml                      |   10 
 en-US/Create_Storage-common-listitem-5.xml                      |   10 
 en-US/Create_Storage-common-listitem-6.xml                      |   10 
 en-US/Create_Storage-common-listitem-7.xml                      |   10 
 en-US/Create_Storage-common-para-1.xml                          |    8 
 en-US/Create_Storage-common-para-2.xml                          |    8 
 en-US/Create_Storage-common-title-1.xml                         |    8 
 en-US/Create_Storage-common-title-2.xml                         |    8 
 en-US/Create_Storage-common-title-3.xml                         |    8 
 en-US/Create_Storage-common-title-4.xml                         |    8 
 en-US/Create_Storage-x86.xml                                    |   57 +++++
 en-US/Disk_Partitioning-x86.xml                                 |  108 +++++++---
 en-US/Disk_Partitioning_Graphical_common-para-2.xml             |    5 
 en-US/Disk_Partitioning_Graphical_common-para-3.xml             |    8 
 en-US/Disk_Partitioning_Graphical_common-para-4.xml             |    8 
 en-US/Disk_Partitioning_Graphical_common-para-5.xml             |    8 
 en-US/Disk_Partitioning_Graphical_common-para-6.xml             |    8 
 en-US/Disk_Partitioning_Graphical_common-variablelist-1.xml     |   47 ++++
 en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml            |    5 
 en-US/Disk_Partitioning_X86_Partitions.xml                      |    2 
 en-US/Disk_Partitioning_common-title-1.xml                      |    8 
 44 files changed, 761 insertions(+), 40 deletions(-)

New commits:
commit 678f24571b4439fe9cdb9f63207769f7eaa07928
Author: Ruediger Landmann <r.landmann at redhat.com>
Date:   Fri Apr 30 14:36:51 2010 +1000

    Update section 7.20

diff --git a/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml b/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml
index b98a975..384f9f2 100644
--- a/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml
+++ b/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml
@@ -7,7 +7,7 @@
 		<guilabel>Btrfs</guilabel> &mdash; Btrfs is under development as a file system capable of addressing and managing more files, larger files, and larger volumes than the ext2, ext3, and ext4 file systems. Btrfs is designed to make the file system tolerant of errors, and to facilitate the detection and repair of errors when they occur. It uses checksums to ensure the validity of data and metadata, and maintains snapshots of the file system that can be used for backup or repair. 
 	</para>
 	<para>
-		Because Btrfs is still experimental and under development, the installation program does not offer it by default. If you want to create a Btrfs partition on a drive, you must commence the installation process with the boot option <command> icantbelieveitsnotbtr</command>. Refer to <xref linkend="ap-admin-options"/> for instructions. 
+		Because Btrfs is still experimental and under development, the installation program does not offer it by default. If you want to create a Btrfs partition on a drive, you must commence the installation process with the boot option <command>btrfs</command>. Refer to <xref linkend="ap-admin-options"/> for instructions. 
 	</para>
 	<warning>
 	<title>Btrfs is still experimental</title>
diff --git a/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-7.xml b/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-7.xml
new file mode 100644
index 0000000..1e538a5
--- /dev/null
+++ b/en-US/Adding_Partitions-section-2-itemizedlist-1-listitem-7.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>xfs</guilabel> &mdash; XFS is a highly scalable, high-performance file system that supports filesystems up to 16 exabytes (approximately 16 million terabytes), files up to 8 exabytes (approximately 8 million terabytes) and directory structures containing tens of millions of entries. XFS supports metadata journaling, which facilitates quicker crash recovery. The XFS file system can also be defragmented and resized while mounted and active. 
+	</para>
+</listitem>
+
diff --git a/en-US/Adding_Partitions-section-2-itemizedlist-1.xml b/en-US/Adding_Partitions-section-2-itemizedlist-1.xml
index 9e05b22..faa90ac 100644
--- a/en-US/Adding_Partitions-section-2-itemizedlist-1.xml
+++ b/en-US/Adding_Partitions-section-2-itemizedlist-1.xml
@@ -29,4 +29,8 @@
 	
 	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions-section-2-itemizedlist-1-listitem-6.xml"/>
 	<!-- vfat -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions-section-2-itemizedlist-1-listitem-7.xml"/>
+	<!-- xfs -->
+	
 </itemizedlist>
\ No newline at end of file
diff --git a/en-US/Adding_Partitions-x86.xml b/en-US/Adding_Partitions-x86.xml
index ddf9c2c..136d19c 100644
--- a/en-US/Adding_Partitions-x86.xml
+++ b/en-US/Adding_Partitions-x86.xml
@@ -2,7 +2,7 @@
 <!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
 ]>
 
-<section>
+<section id="Adding_Partitions-x86">
 	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions_common-title-1.xml"/>
 	<!-- Adding Partitions -->
 	
@@ -13,7 +13,7 @@
 	<!-- End Index terms -->
 	
 	<para>
-		To add a new partition, select the <guibutton>New</guibutton> button. A dialog box appears (refer to <xref linkend="fig-diskpartitioning-part-add-x86"/>).
+		To add a new partition, select the <guibutton>Create</guibutton> button. A dialog box appears (refer to <xref linkend="fig-diskpartitioning-part-add-x86"/>).
 	</para>
 	
 	<note>
@@ -59,6 +59,9 @@
 			</para>
 		</listitem>
 		
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions_x86_ppc-listitem-7.xml"/>
+		<!-- Encrypt: Choose whether to encrypt the partition so that the data stored on it cannot be accessed without a passphrase -->
+		
 		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions_x86_ppc-listitem-5.xml"/>
 		<!-- OK: Select OK once you are satisfied with the settings -->
 		
diff --git a/en-US/Adding_Partitions_x86_ppc-listitem-7.xml b/en-US/Adding_Partitions_x86_ppc-listitem-7.xml
new file mode 100644
index 0000000..2fe5be8
--- /dev/null
+++ b/en-US/Adding_Partitions_x86_ppc-listitem-7.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>Encrypt</guilabel>: Choose whether to encrypt the partition so that the data stored on it cannot be accessed without a passphrase, even if the storage device is connected to another system. Refer to <xref linkend="Disk_Encryption_Guide"/> for information on encryption of storage devices. If you select this option, the installer prompts you to provide a passphrase before it writes the partition to the disk.
+	</para>
+</listitem>
+
diff --git a/en-US/Create_LVM-common-important-1.xml b/en-US/Create_LVM-common-important-1.xml
new file mode 100644
index 0000000..7c81bfb
--- /dev/null
+++ b/en-US/Create_LVM-common-important-1.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<important>
+	<title>Important â€” LVM Unavailable in Text Installs</title>
+	<para>
+		LVM initial set up is not available in a text-mode installation.  The installer allows you to edit pre-configured LVM volumes.  If you need to create an LVM configuration from scratch, hit <keycombo> <keycap function="alt">Alt</keycap> <keycap function="other" otherfunction="F2">F2</keycap> </keycombo> to use the terminal, and run the <command>lvm</command> command.  To return to the text-mode installation, hit <keycombo> <keycap function="alt">Alt</keycap> <keycap function="other" otherfunction="F1">F1</keycap> </keycombo>.
+	</para>
+</important>
diff --git a/en-US/Create_LVM-common-para-1.xml b/en-US/Create_LVM-common-para-1.xml
new file mode 100644
index 0000000..b42fcb6
--- /dev/null
+++ b/en-US/Create_LVM-common-para-1.xml
@@ -0,0 +1,7 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	<firstterm>Logical Volume Management</firstterm> (LVM) presents a simple logical view of underlying physical storage space, such as a hard drives or LUNs. Partitions on physical storage are represented as <firstterm>physical volumes</firstterm> that can be grouped together into <firstterm>volume groups</firstterm>. Each volume group can be divided into multiple <firstterm>logical volumes</firstterm>, each of which is analogous to a standard disk partition. Therefore, LVM logical volumes function as partitions that can span multiple physical disks.
+</para>
diff --git a/en-US/Create_LVM-common-para-2.xml b/en-US/Create_LVM-common-para-2.xml
new file mode 100644
index 0000000..43405cc
--- /dev/null
+++ b/en-US/Create_LVM-common-para-2.xml
@@ -0,0 +1,7 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	To read more about LVM, refer to the <citetitle>Red Hat Enterprise Linux Deployment Guide</citetitle>. Note, LVM is only available in the graphical installation program.
+</para>
diff --git a/en-US/Create_LVM-common-title-1.xml b/en-US/Create_LVM-common-title-1.xml
new file mode 100644
index 0000000..95644cc
--- /dev/null
+++ b/en-US/Create_LVM-common-title-1.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create LVM Logical Volume
+</title>
+
diff --git a/en-US/Create_LVM-common-variablelist-1.xml b/en-US/Create_LVM-common-variablelist-1.xml
new file mode 100644
index 0000000..1c89e89
--- /dev/null
+++ b/en-US/Create_LVM-common-variablelist-1.xml
@@ -0,0 +1,54 @@
+<?xml version="1.0"?>
+<!DOCTYPE variablelist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<variablelist>
+
+
+	<varlistentry>
+		<term><guilabel>Make LVM Volume Group</guilabel></term>
+		<listitem>
+			<para>
+				Choose this option to create LVM volume groups from the available LVM physical volumes, or to add existing logical volumes to a volume group. 
+			</para>
+
+			<figure float="0" ><title>Make LVM Volume Group</title>
+				<mediaobject>
+					<imageobject><imagedata fileref="images/diskpartitioning/lvm-vg.png" format="PNG"/></imageobject>
+					<textobject><para>
+							The Make LVM Volume Group dialog.
+						</para>
+					</textobject>
+				</mediaobject>
+			</figure>
+			<para>
+				To assign one or more physical volumes to a volume group, first name the volume group. Then select the physical volumes to be used in the volume group. Finally, configure logical volumes on any volume groups using the <guilabel>Add</guilabel>, <guilabel>Edit</guilabel> and <guilabel>Delete</guilabel> options.
+			</para>
+			<para>
+				You may not remove a physical volume from a volume group if doing so would leave insufficient space for that group's logical volumes. Take for example a volume group made up of two 5 GB LVM physical volume partitions, which contains an 8 GB logical volume. The installer would not allow you to remove either of the component physical volumes, since that would leave only 5 GB in the group for an 8 GB logical volume. If you reduce the total size of any logical volumes appropriately, you may then remove a physical volume from the volume group. In the example, reducing the size of the logical volume to 4 GB would allow you to remove one of the 5 GB physical volumes.
+			</para>
+		</listitem>
+	</varlistentry>
+
+	<varlistentry>
+		<term><guilabel>Make Logical Volume</guilabel></term>
+		<listitem>
+			<para>
+				Choose this option to create an LVM logical volume. Select a mount point, file system type, and size (in MB) just as if it were a standard disk partition. You can also choose a name for the logical volume and specify the volume group to which it will belong. 
+			</para>
+
+			<figure float="0" ><title>Make Logical Volume</title>
+				<mediaobject>
+					<imageobject><imagedata fileref="images/diskpartitioning/lvm-lv.png" format="PNG"/></imageobject>
+					<textobject><para>
+							The Make Logical Volume dialog.
+						</para>
+					</textobject>
+				</mediaobject>
+			</figure>
+
+		</listitem>
+	</varlistentry>
+</variablelist>
+
+
diff --git a/en-US/Create_LVM-x86.xml b/en-US/Create_LVM-x86.xml
new file mode 100644
index 0000000..0cfa0e5
--- /dev/null
+++ b/en-US/Create_LVM-x86.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<section id="Create_LVM-x86">
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-common-title-1.xml"/>
+	<!-- Create LVM Logical Volume -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-common-important-1.xml"/>
+	<!-- Important â€” LVM Unavailable in Text Installs -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-common-para-1.xml"/>
+	<!-- Logical Volume Management (LVM) presents a simple logical view of underlying physical storage space -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-common-para-2.xml"/>
+	<!-- To read more about LVM, refer to the Red Hat Enterprise Linux Deployment Guide -->
+	
+	<variablelist>
+		<varlistentry>
+			<term>LVM Physical Volume</term>
+			<listitem>
+				<para>
+					Choose this option to configure a partition or device as an LVM physical volume. This option is the only choice available if your storage does not already contain LVM Volume Groups. This is the same dialog that appears when you add a standard partition â€” refer to <xref linkend="Adding_Partitions-x86"/> for a description of the available options. Note, however, that <guilabel>File System Type</guilabel> must be set to <literal>physical volume (LVM)</literal>
+				</para>
+
+				<figure float="0" ><title>Create an LVM Physical Volume</title>
+					<mediaobject>
+						<imageobject><imagedata fileref="images/diskpartitioning/lvm-pv.png" format="PNG"/></imageobject>
+						<textobject><para>
+								The Create an LVM Physical Volume dialog.
+							</para>
+						</textobject>
+					</mediaobject>
+				</figure>
+
+
+			</listitem>
+		</varlistentry>
+	</variablelist>
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-common-variablelist-1.xml"/>
+	<!-- LVM Physical Volume - Choose this option to configure a partition or device as an LVM physical volume. -->
+
+</section>
+
diff --git a/en-US/Create_Software_RAID-common-para-1.xml b/en-US/Create_Software_RAID-common-para-1.xml
new file mode 100644
index 0000000..0c867f5
--- /dev/null
+++ b/en-US/Create_Software_RAID-common-para-1.xml
@@ -0,0 +1,9 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	<firstterm>Redundant arrays of independent disks</firstterm> (RAIDs) are constructed from multiple storage devices that are arranged to provided increased performance and â€” in some configurations â€” greater fault tolerance. 
+</para>
+	
+
diff --git a/en-US/Create_Software_RAID-common-para-2.xml b/en-US/Create_Software_RAID-common-para-2.xml
new file mode 100644
index 0000000..fe07134
--- /dev/null
+++ b/en-US/Create_Software_RAID-common-para-2.xml
@@ -0,0 +1,9 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	To make a RAID device, you must first create software RAID partitions. Once you have created two or more software RAID partitions, select <guibutton>RAID</guibutton> to join the software RAID partitions into a RAID device.
+</para>
+	
+
diff --git a/en-US/Create_Software_RAID-common-title-1.xml b/en-US/Create_Software_RAID-common-title-1.xml
new file mode 100644
index 0000000..acc2ab0
--- /dev/null
+++ b/en-US/Create_Software_RAID-common-title-1.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create Software RAID
+</title>
+
diff --git a/en-US/Create_Software_RAID-common-variablelist-1.xml b/en-US/Create_Software_RAID-common-variablelist-1.xml
new file mode 100644
index 0000000..8e0cc34
--- /dev/null
+++ b/en-US/Create_Software_RAID-common-variablelist-1.xml
@@ -0,0 +1,99 @@
+<?xml version="1.0"?>
+<!DOCTYPE variablelist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<variablelist>
+
+
+
+	<varlistentry>
+		<term><guilabel>RAID Device</guilabel></term>
+		<listitem>
+			<para>
+				Choose this option to construct a RAID device from two or more existing software RAID partitions. This option is available if two or more software RAID partitions have been configured.
+			</para>
+
+			<figure float="0" ><title>Create a RAID device</title>
+				<mediaobject>
+					<imageobject><imagedata fileref="images/diskpartitioning/raid-device.png" format="PNG"/></imageobject>
+					<textobject><para>
+							The create a RAID device dialog.
+						</para>
+					</textobject>
+				</mediaobject>
+			</figure>
+			
+			<para>
+				Select the file system type as for a standard partion. 
+			</para>
+			
+			<para>
+				<application>Anaconda</application> automatically suggests a name for the RAID device, but you can manually select names from <literal>md0</literal> to <literal>md15</literal>.
+			</para>
+			
+			<para>
+				Click the checkboxes beside individual storage devices to include or remove them from this RAID.
+			</para>
+			
+			<para>
+				The <guilabel>RAID Level</guilabel> corresponds to a particular type of RAID. Choose from the following options:
+			</para>
+			
+			<itemizedlist>
+				<listitem>
+					<para>
+						<guilabel>RAID 0</guilabel> â€” distributes data across multiple storage devices. Level 0 RAIDs offer increased performance over standard partitions, and can be used to pool the storage of multiple devices into one large virtual device. Note that Level 0 RAIDS offer no redundancy and that the failure of one device in the array destroys the entire array. RAID 0 requires at least two RAID partitions.
+					</para>
+				</listitem>
+				<listitem>
+					<para>
+						<guilabel>RAID 1</guilabel> â€” mirrors the data on one storage device onto one or more other storage devices. Additional devices in the array provide increasing levels of redundancy. RAID 1 requires at least two RAID partitions.
+					</para>
+				</listitem>
+				<listitem>
+					<para>
+						<guilabel>RAID 4</guilabel> â€” distributes data across multiple storage devices, but uses one device in the array to store parity information that safeguards the array in case any device within the array fails. Because all parity information is stored on the one device, access to this device creates a bottleneck in the performance of the array. RAID 4 requires at least three RAID partitions.
+					</para>
+				</listitem>
+				<listitem>
+					<para>
+						<guilabel>RAID 5</guilabel> â€” distributes data and parity information across multiple storage devices. Level 5 RAIDs therefore offer the performance advantages of distributing data across multiple devices, but do not share the performance bottleneck of level 4 RAIDs because the parity information is also distributed through the array. RAID 5 requires at least three RAID partitions.
+					</para>
+				</listitem>
+				<listitem>
+					<para>
+						<guilabel>RAID 6</guilabel> â€” level 6 RAIDs are similar to level 5 RAIDs, but instead of storing only one set of parity data, they store two sets.  RAID 6 requires at least four RAID partitions.
+					</para>
+				</listitem>
+				<listitem>
+					<para>
+						<guilabel>RAID 10</guilabel> â€” level 10 RAIDs are <firstterm>nested RAIDs</firstterm> or <firstterm>hybrid RAIDs</firstterm>. Level 10 RAIDs are constructed by distributing data over mirrored sets of storage devices. For example, a level 10 RAID contructed from four RAID partitions consists of two pairs of partitions in which one partition mirrors the other. Data is then distributed across both pairs of storage devices, as in a level 0 RAID. RAID 10 requires at least four RAID partitions.
+					</para>
+				</listitem>
+			</itemizedlist>
+
+		</listitem>
+	</varlistentry>
+
+	<varlistentry>
+		<term><guilabel>RAID Clone</guilabel></term>
+		<listitem>
+			<para>
+				Choose this option to set up a RAID <firstterm>mirror</firstterm> of an existing disk. This option is available if two or more disks are attached to the system.
+			</para>
+
+			<figure float="0" ><title>Clone a RAID device</title>
+				<mediaobject>
+					<imageobject><imagedata fileref="images/diskpartitioning/raid-clone.png" format="PNG"/></imageobject>
+					<textobject><para>
+							The clone a RAID device dialog.
+						</para>
+					</textobject>
+				</mediaobject>
+			</figure>
+
+		</listitem>
+	</varlistentry>
+</variablelist>
+
+
diff --git a/en-US/Create_Software_RAID-x86.xml b/en-US/Create_Software_RAID-x86.xml
new file mode 100644
index 0000000..dfe8756
--- /dev/null
+++ b/en-US/Create_Software_RAID-x86.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0"?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<section id="Create_Software_RAID-x86">
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Software_RAID-common-title-1.xml"/>
+	<!-- Create Software RAID -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Software_RAID-common-para-1.xml"/>
+	<!-- Redundant arrays of independent disks (RAIDs) are constructed from multiple storage devices -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Software_RAID-common-para-2.xml"/>
+	<!-- To make a RAID device, you must first create software RAID partitions. -->
+	
+	<variablelist>
+		<varlistentry>
+			<term>RAID Partition</term>
+			<listitem>
+				<para>
+					Choose this option to configure a partition for software RAID. This option is the only choice available if your disk contains no software RAID partitions. This is the same dialog that appears when you add a standard partition â€” refer to <xref linkend="Adding_Partitions-x86"/> for a description of the available options. Note, however, that <guilabel>File System Type</guilabel> must be set to <literal>software RAID</literal>
+				</para>
+
+				<figure float="0" ><title>Create a software RAID partition</title>
+					<mediaobject>
+						<imageobject><imagedata fileref="images/diskpartitioning/software-raid.png" format="PNG"/></imageobject>
+						<textobject><para>
+								The create a software RAID partition dialog.
+							</para>
+						</textobject>
+					</mediaobject>
+				</figure>
+
+
+			</listitem>
+		</varlistentry>
+	</variablelist>
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Software_RAID-common-variablelist-1.xml"/>
+	<!-- To make a RAID device, you must first create software RAID partitions. -->
+
+</section>
+
diff --git a/en-US/Create_Storage-common-figure-1.xml b/en-US/Create_Storage-common-figure-1.xml
new file mode 100644
index 0000000..5b370c4
--- /dev/null
+++ b/en-US/Create_Storage-common-figure-1.xml
@@ -0,0 +1,14 @@
+<?xml version="1.0"?>
+<!DOCTYPE figure PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<figure float="0"><title>Creating Storage</title>
+	<mediaobject>
+		<imageobject><imagedata fileref="images/diskpartitioning/part-create.png" format="PNG"/></imageobject>
+		<textobject><para>
+				Creating new storage
+			</para>
+		</textobject>
+	</mediaobject>
+</figure>
+
diff --git a/en-US/Create_Storage-common-itemizedlist-1.xml b/en-US/Create_Storage-common-itemizedlist-1.xml
new file mode 100644
index 0000000..2df12a0
--- /dev/null
+++ b/en-US/Create_Storage-common-itemizedlist-1.xml
@@ -0,0 +1,17 @@
+<?xml version="1.0"?>
+<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<itemizedlist>
+	<title>Create Partition</title>
+	<para>
+		Refer to 
+	</para>
+	<listitem>
+		<para>
+			<guilabel>Standard Partition</guilabel> â€” create a standard disk partition (as described in <xref linkend="ch-partitions-x86"/>) in unallocated space.
+		</para>
+	</listitem>
+	
+</itemizedlist>
+
diff --git a/en-US/Create_Storage-common-itemizedlist-2.xml b/en-US/Create_Storage-common-itemizedlist-2.xml
new file mode 100644
index 0000000..822915a
--- /dev/null
+++ b/en-US/Create_Storage-common-itemizedlist-2.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0"?>
+<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<itemizedlist>
+	<title>Create Software RAID</title>
+	<para>
+		Refer to 
+	</para>
+	<listitem>
+		<para>
+			<guilabel>RAID Partition</guilabel> â€” create a partition in unallocated space to form part of a software RAID device. To form a software RAID device, two or more RAID partitions must be available on the system.
+		</para>
+	</listitem>
+	<listitem>
+		<para>
+			<guilabel>RAID Device</guilabel> â€” combine two or more RAID partitions into a software RAID device. When you choose this option, you can specify the type of RAID device to create (the <firstterm>RAID level</firstterm>. This option is only available when two or more RAID partitions are available on the system. 
+		</para>
+	</listitem>
+	<listitem>
+		<para>
+			<guilabel>RAID Clone</guilabel> â€” create a mirror of a RAID partition on one storage device on another storage device. This option is only available when at least one RAID partition is available on the system.
+		</para>
+	</listitem>
+	
+</itemizedlist>
+
diff --git a/en-US/Create_Storage-common-itemizedlist-3.xml b/en-US/Create_Storage-common-itemizedlist-3.xml
new file mode 100644
index 0000000..04a8c03
--- /dev/null
+++ b/en-US/Create_Storage-common-itemizedlist-3.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0"?>
+<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<itemizedlist>
+    <title>Create LVM</title>
+    <para>
+	    Refer to 
+    </para>
+    <listitem>
+	    <para>
+		    <guilabel>LVM Physical Volume</guilabel> â€” create a <firstterm>physical volume</firstterm> in unallocated space.
+	    </para>
+    </listitem>
+    <listitem>
+	    <para>
+		    <guilabel>LVM Volume Group</guilabel> â€” create a <firstterm>volume group</firstterm> from one or more physical volumes. This option is only available when at least one physical volume is available on the system.
+	    </para>
+    </listitem>
+    <listitem>
+	    <para>
+		    <guilabel>LVM Logical Volume</guilabel> â€” create a <firstterm>logical volume</firstterm> on a volume group. This option is only available when at least one volume group is available on the system.
+	    </para>
+    </listitem>
+    
+</itemizedlist>
+
diff --git a/en-US/Create_Storage-common-listitem-1.xml b/en-US/Create_Storage-common-listitem-1.xml
new file mode 100644
index 0000000..35086b4
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-1.xml
@@ -0,0 +1,13 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>Standard Partition</guilabel> â€” create a standard disk partition (as described in <xref linkend="ch-partitions-x86"/>) in unallocated space.
+	</para>
+</listitem>
+			
+			
+			
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-2.xml b/en-US/Create_Storage-common-listitem-2.xml
new file mode 100644
index 0000000..42aeb29
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-2.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>RAID Partition</guilabel> â€” create a partition in unallocated space to form part of a software RAID device. To form a software RAID device, two or more RAID partitions must be available on the system.
+	</para>
+</listitem>	
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-3.xml b/en-US/Create_Storage-common-listitem-3.xml
new file mode 100644
index 0000000..c11ee28
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-3.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>RAID Device</guilabel> â€” combine two or more RAID partitions into a software RAID device. When you choose this option, you can specify the type of RAID device to create (the <firstterm>RAID level</firstterm>. This option is only available when two or more RAID partitions are available on the system. 
+	</para>
+</listitem>
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-4.xml b/en-US/Create_Storage-common-listitem-4.xml
new file mode 100644
index 0000000..26de117
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-4.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>RAID Clone</guilabel> â€” create a mirror of a RAID partition on one storage device on another storage device. This option is only available when at least one RAID partition is available on the system.
+	</para>
+</listitem>
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-5.xml b/en-US/Create_Storage-common-listitem-5.xml
new file mode 100644
index 0000000..ca3e4d7
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-5.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>LVM Physical Volume</guilabel> â€” create a <firstterm>physical volume</firstterm> in unallocated space.
+	</para>
+</listitem>
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-6.xml b/en-US/Create_Storage-common-listitem-6.xml
new file mode 100644
index 0000000..2a3b61d
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-6.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>LVM Volume Group</guilabel> â€” create a <firstterm>volume group</firstterm> from one or more physical volumes. This option is only available when at least one physical volume is available on the system.
+	</para>
+</listitem>
+			
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-listitem-7.xml b/en-US/Create_Storage-common-listitem-7.xml
new file mode 100644
index 0000000..1f84b35
--- /dev/null
+++ b/en-US/Create_Storage-common-listitem-7.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0"?>
+<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<listitem>
+	<para>
+		<guilabel>LVM Logical Volume</guilabel> â€” create a <firstterm>logical volume</firstterm> on a volume group. This option is only available when at least one volume group is available on the system.
+	</para>
+</listitem>
+	
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-para-1.xml b/en-US/Create_Storage-common-para-1.xml
new file mode 100644
index 0000000..7835a65
--- /dev/null
+++ b/en-US/Create_Storage-common-para-1.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	The <guilabel>Create Storage</guilabel> dialog allows you to create new storage partitions, logical volumes, and software RAIDs. <application>Anaconda</application> presents options as available or unavailable depending on the storage already present on the system or configured to transfer to the system.
+</para>
+
diff --git a/en-US/Create_Storage-common-para-2.xml b/en-US/Create_Storage-common-para-2.xml
new file mode 100644
index 0000000..7e173d0
--- /dev/null
+++ b/en-US/Create_Storage-common-para-2.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	Options are grouped under <guilabel>Create Partition</guilabel>, <guilabel>Create Software RAID</guilabel> and <guilabel>Create LVM</guilabel> as follows:
+</para>
+
diff --git a/en-US/Create_Storage-common-title-1.xml b/en-US/Create_Storage-common-title-1.xml
new file mode 100644
index 0000000..399af73
--- /dev/null
+++ b/en-US/Create_Storage-common-title-1.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create Storage
+</title>
+
diff --git a/en-US/Create_Storage-common-title-2.xml b/en-US/Create_Storage-common-title-2.xml
new file mode 100644
index 0000000..17f6973
--- /dev/null
+++ b/en-US/Create_Storage-common-title-2.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create Partition
+</title>
+
diff --git a/en-US/Create_Storage-common-title-3.xml b/en-US/Create_Storage-common-title-3.xml
new file mode 100644
index 0000000..a687660
--- /dev/null
+++ b/en-US/Create_Storage-common-title-3.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE ttile PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create Software RAID
+</title>
+
diff --git a/en-US/Create_Storage-common-title-4.xml b/en-US/Create_Storage-common-title-4.xml
new file mode 100644
index 0000000..c5d160b
--- /dev/null
+++ b/en-US/Create_Storage-common-title-4.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE ttile PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<title>
+	Create LVM Logical Volume
+</title>
+
diff --git a/en-US/Create_Storage-x86.xml b/en-US/Create_Storage-x86.xml
new file mode 100644
index 0000000..85c7ec5
--- /dev/null
+++ b/en-US/Create_Storage-x86.xml
@@ -0,0 +1,57 @@
+<?xml version="1.0"?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<section id="Create_Storage-x86">
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-title-1.xml"/>
+	<!-- Create Storage -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-para-1.xml"/>
+	<!-- The Create Storage dialog allows you to create new storage partitions -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-figure-1.xml"/>
+	<!-- Creating Storage -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-para-2.xml"/>
+	<!-- Options are grouped under Create Partition, Create Software RAID and Create LVM as follows -->
+	
+	<itemizedlist>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-title-2.xml"/>
+		<!-- Create Partition -->
+		<para>
+			Refer to <xref linkend="Adding_Partitions-x86"/> for details of the <guilabel>Add Partition</guilabel> dialog.
+		</para>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-1.xml"/>
+		<!-- Standard Partition â€” create a standard disk partition -->
+	</itemizedlist>
+	
+	<itemizedlist>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-title-3.xml"/>
+		<!-- Create Software RAID -->
+		<para>
+			Refer to <xref linkend="Create_Software_RAID-x86"/> for more detail.
+		</para>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-2.xml"/>
+		<!-- RAID Partition â€” create a partition in unallocated space to form part of a software RAID device. -->
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-3.xml"/>
+		<!-- RAID Device â€” combine two or more RAID partitions into a software RAID device. -->
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-4.xml"/>
+		<!-- RAID Clone â€” create a mirror of a RAID partition on one storage device on another storage device. -->
+	</itemizedlist>
+	
+	<itemizedlist>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-title-4.xml"/>
+		<!-- Create LVM Logical Volume -->
+		<para>
+			Refer to <xref linkend="Create_LVM-x86"/> for more detail.
+		</para>
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-5.xml"/>
+		<!-- LVM Physical Volume â€” create a physical volume in unallocated space. -->
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-6.xml"/>
+		<!-- LVM Volume Group â€” create a volume group from one or more physical volumes. -->
+		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-common-listitem-7.xml"/>
+		<!-- LVM Logical Volume â€” create a logical volume on a volume group. -->
+	</itemizedlist>
+
+</section>
+
diff --git a/en-US/Disk_Partitioning-x86.xml b/en-US/Disk_Partitioning-x86.xml
index 30aa11a..11d22b1 100644
--- a/en-US/Disk_Partitioning-x86.xml
+++ b/en-US/Disk_Partitioning-x86.xml
@@ -14,29 +14,24 @@
 	<!-- End Index terms -->
 	
 	<para>
-		If you chose one of the three automatic partitioning options and did not select <guilabel>Review</guilabel>, skip ahead to <!-- (RHEL) <xref linkend="s1-netconfig-x86"/>--> <xref linkend="s1-pkgselection-x86"/>.
+		If you chose one of the four automatic partitioning options and did not select <guilabel>Review</guilabel>, skip ahead to <xref linkend="s1-pkgselection-x86"/>.
 	</para>
 
 	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_x86_ppc-para-1.xml"/>
 	<!-- If you chose one of the automatic partitioning options and selected... -->
 
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_x86_ppc-note-1.xml"/>
-	<!-- Please note that in the text mode installation -->
-	
 	<para>
 		If you chose to create a custom layout, you must tell the installation program where to install Fedora. This is done by defining mount points for one or more disk partitions in which Fedora is installed. You may also need to create and/or delete partitions at this time.
 	</para>
 	
-	<note>
-		<title>Note</title>
-		
-		<para>
-			If you have not yet planned how to set up your partitions, refer to <xref linkend="ch-partitions-x86"/> and <xref linkend="s2-diskpartrecommend-x86"/>. At a bare minimum, you need an appropriately-sized root partition, and a swap partition equal to twice the amount of RAM you have on the system. Itanium system users should have a <filename>/boot/efi/</filename> partition of approximately 100 MB and of type FAT (VFAT), a swap partition of at least 512 MB, and an appropriately-sized root
-			(<filename>/</filename>) partition.
-		</para>
-	</note>
+	<para>
+		If you have not yet planned how to set up your partitions, refer to <xref linkend="ch-partitions-x86"/> and <xref linkend="s2-diskpartrecommend-x86"/>. At a bare minimum, you need an appropriately-sized root partition, and usually a swap partition appropriate to the amount of RAM you have on the system. 
+	</para>
+
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_common-para-1.xml"/>
+	<!-- The partitioning tool used by the installation program -->
 	
-	<figure float="0" id="fig-diskpart-ddmain-x86"><title>Partitioning on x86, AMD64, and <trademark class="registered">Intel</trademark> 64 Systems</title>
+	<figure float="0" id="fig-diskpart-ddmain-x86"><title>Partitioning on x86, AMD64, and Intel 64 Systems</title>
 		<mediaobject>
 			<imageobject><imagedata fileref="images/diskpartitioning/ddmain.png" format="PNG"/></imageobject>
 			<textobject><para>
@@ -47,28 +42,85 @@
 	</figure>
 	
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_common-para-1.xml"/>
-	<!-- The partitioning tool used by the installation program -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"/>
+	<!-- The partitioning screen offers a graphical representation... -->
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical-x86.xml"/>
-	<!-- Graphical Display of Hard Drives -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-2.xml"/>
+	<!-- Above the graphical representation of the device... -->
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-x86.xml"/>
-	<!-- The partitioning screen -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-1.xml"/>
+	<!-- Anaconda displays several details for each device listed -->
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Fields-common.xml"/>
-	<!-- Partition Fields -->
+	<para>
+		The lower pane contains a list of all drives, logical volumes, and RAID devices to be used during installation, as specified earlier in the installation process â€” refer to <xref linkend="Assign_Storage_Devices-x86"/>
+	</para>
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Scheme-x86.xml"/>
-	<!-- Recommended Partitioning Scheme -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-3.xml"/>
+	<!-- Devices are grouped by type. -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-4.xml"/>
+	<!-- Using your mouse, click once to highlight a particular field... -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-variablelist-1.xml"/>
+	<!-- the name of the device, logical volume, or partition -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-5.xml"/>
+	<!-- Beneath the lower pane are four buttons: -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-6.xml"/>
+	<!-- Select a device or partition by clicking on it -->
+	
+	<variablelist>
+		<varlistentry>
+			<term>Create</term>
+			<listitem>
+				<para>
+					create a new partition, logical volume, or software RAID
+				</para>
+			</listitem>
+		</varlistentry>
+		<varlistentry>
+			<term>Edit</term>
+			<listitem>
+				<para>
+					change an existing new partition, logical volume, or software RAID
+				</para>
+			</listitem>
+		</varlistentry>
+		<varlistentry>
+			<term>Delete</term>
+			<listitem>
+				<para>
+					remove a partition, logical volume, or software RAID
+				</para>
+			</listitem>
+		</varlistentry>
+		<varlistentry>
+			<term>Reset</term>
+			<listitem>
+				<para>
+					undo all changes made in this screen
+				</para>
+			</listitem>
+		</varlistentry>
+	</variablelist>
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Storage-x86.xml"/>
+	<!-- Create Storage -->
 	
 	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Adding_Partitions-x86.xml"/>
 	<!-- Adding Partitions -->
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Editing_Partitions-common.xml"/>
-	<!-- Editing Partitions -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_Software_RAID-x86.xml"/>
+	<!-- Create Software RAID -->
+	
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Create_LVM-x86.xml"/>
+	<!-- Create LVM Logical Volume -->
 	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Deleting_Partitions-x86.xml"/>
-	<!-- Deleting a Partition -->
+	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Scheme-x86.xml"/>
+	<!-- Recommended Partitioning Scheme -->
 	
-</section>
\ No newline at end of file
+	
+	
+</section>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-2.xml b/en-US/Disk_Partitioning_Graphical_common-para-2.xml
index 347d7b8..1e8d99f 100644
--- a/en-US/Disk_Partitioning_Graphical_common-para-2.xml
+++ b/en-US/Disk_Partitioning_Graphical_common-para-2.xml
@@ -6,5 +6,6 @@
 ]>
 
 <para>
-	Above the display, you can review the name of the drive (such as /dev/hda), its size (in MB), and its model as detected by the installation program.
-</para>
\ No newline at end of file
+	Above the graphical representation of the device, you can review the name of the drive (such as <literal>/dev/sda</literal> or <literal>LogVol00</literal>), its size (in MB), and its model as detected by the installation program.
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-3.xml b/en-US/Disk_Partitioning_Graphical_common-para-3.xml
new file mode 100644
index 0000000..db0a17c
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-3.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	Devices are grouped by type. Click on the small triangles to the left of each device type to view or hide devices of that type.
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-4.xml b/en-US/Disk_Partitioning_Graphical_common-para-4.xml
new file mode 100644
index 0000000..0d605b7
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-4.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	<application>Anaconda</application> displays several details for each device listed: 
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-5.xml b/en-US/Disk_Partitioning_Graphical_common-para-5.xml
new file mode 100644
index 0000000..b1f3bf0
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-5.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	Beneath the lower pane are four buttons: <guibutton>Create</guibutton>, <guibutton>Edit</guibutton>, <guibutton>Delete</guibutton>, and <guibutton>Reset</guibutton>.
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-6.xml b/en-US/Disk_Partitioning_Graphical_common-para-6.xml
new file mode 100644
index 0000000..a5438ce
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-6.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<para>
+	Select a device or partition by clicking on it in either the graphical representation in the upper pane of in the list in the lower pane, then click one of the four buttons to carry out the following actions:
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-variablelist-1.xml b/en-US/Disk_Partitioning_Graphical_common-variablelist-1.xml
new file mode 100644
index 0000000..82f3dd4
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-variablelist-1.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0"?>
+<!DOCTYPE variablelist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<variablelist>
+	<varlistentry>
+		<term>Device</term>
+		<listitem>
+			<para>
+				the name of the device, logical volume, or partition
+			</para>
+		</listitem>
+	</varlistentry>
+	<varlistentry>
+		<term>Size (MB)</term>
+		<listitem>
+			<para>
+				the size of the device, logical volume, or partition (in MB)
+			</para>
+		</listitem>
+	</varlistentry>
+	<varlistentry>
+		<term>Mount Point/RAID/Volume</term>
+		<listitem>
+			<para>
+				the <firstterm>mount point</firstterm> (location within a file system) on which a partition is to be mounted, or the name of the RAID or logical volume group of which it is a part
+			</para>
+		</listitem>
+	</varlistentry>
+	<varlistentry>
+		<term>Type</term>
+		<listitem>
+			<para>
+				the type of partition. If the partition is a standard partition, this field displays the type of file system on the partition (for example, ext4). Otherwise, it indicates that the partition is a <literal>physical volume (LVM)</literal>, or part of a <literal>software RAID</literal>
+			</para>
+		</listitem>
+	</varlistentry>
+	<varlistentry>
+		<term>Format</term>
+		<listitem>
+			<para>
+				A check mark in this column indicates that the partition will be formatted during installation.
+			</para>
+		</listitem>
+	</varlistentry>
+</variablelist>
+
diff --git a/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml b/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
index a0281f8..dfa3671 100644
--- a/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
+++ b/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
@@ -3,5 +3,6 @@
 ]>
 
 <para>
-	The partitioning screen offers a graphical representation of your hard drive(s).
-</para>
\ No newline at end of file
+	The screen contains two panes. The top pane contains a graphical representation of the hard drive, logical volume, or RAID device selected in the lower pane.
+</para>
+
diff --git a/en-US/Disk_Partitioning_X86_Partitions.xml b/en-US/Disk_Partitioning_X86_Partitions.xml
index 75fb177..eb34f17 100644
--- a/en-US/Disk_Partitioning_X86_Partitions.xml
+++ b/en-US/Disk_Partitioning_X86_Partitions.xml
@@ -70,7 +70,7 @@
       If you create many partitions instead of one large <filename
 	class="partition">/</filename> partition, upgrades become
       easier. Refer to the description the Edit
-	option in <xref linkend="s2-diskpartitioning-dd-x86"/> for more information.
+	option in <xref linkend="s1-diskpartitioning-x86"/> for more information.
     </para>
     
     
diff --git a/en-US/Disk_Partitioning_common-title-1.xml b/en-US/Disk_Partitioning_common-title-1.xml
index a529bf1..d105e01 100644
--- a/en-US/Disk_Partitioning_common-title-1.xml
+++ b/en-US/Disk_Partitioning_common-title-1.xml
@@ -1,8 +1,8 @@
 <?xml version="1.0"?>
 <!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-	  
-	  
-	  
 ]>
 
-<title>Partitioning Your System</title>
\ No newline at end of file
+<title>
+	Creating a Custom Layout or Modifying the Default Layout
+</title>
+


