2 commits - en-US/adminoptions.xml en-US/Automatic_Partitioning_common-figure-1.xml en-US/Automatic_Partitioning_common-itemizedlist-1.xml en-US/Automatic_Partitioning_common-para-6.xml en-US/Automatic_Partitioning_common-title.xml en-US/Automatic_Partitioning-x86.xml en-US/Create_Storage-common-itemizedlist-1.xml en-US/Create_Storage-common-itemizedlist-2.xml en-US/Create_Storage-common-itemizedlist-3.xml en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml en-US/Deleting_Partitions_x86_ppc-para-1.xml en-US/Deleting_Partitions_x86_ppc-title.xml en-US/Deleting_Partitions-x86.xml en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml en-US/Disk_Partitioning_Disk_Druid_common-title.xml en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml en-US/Disk_Partitioning_Disk_Druid-x86.xml en-US/Disk_Partitioning_Fields-common.xml en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml en-US/Disk_Partitioning_Graphical-x86.xml en-US/Disk_Partitioning_Setup_common-warning-1.xml en-US/Disk_Partitioning_Setup_common-warning-para-1.xml en-US/Disk_Partitioning_Setup_common-warning-para-2.xml en-US/Disk_Partitioning_Setup_common-warning-para-3.xml en-US/Disk_Partitioning_Setup_common-warning-para-4.xml en-US/Disk_Partitioning_Setup_common-warning-title.xml en-US/Disk_Partitioning_x86_ppc-note-1.xml en-US/Editing_Partitions-common.xml en-US/Loopbacktip-common.xml en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml en-US/Steps_Hd_Install-x86.xml en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml en-US/Trouble_After_Sound.xml en-US/vnc_Installation_Chapter.xml en-US/vnc_Modes_Chapter.xml en-US/vnc_Viewer_Chapter.xml

Rüdiger Landmann rlandmann at fedoraproject.org
Fri Apr 30 21:33:25 UTC 2010


 en-US/Automatic_Partitioning-x86.xml                           |   60 ----
 en-US/Automatic_Partitioning_common-figure-1.xml               |   13 -
 en-US/Automatic_Partitioning_common-itemizedlist-1.xml         |   46 ---
 en-US/Automatic_Partitioning_common-para-6.xml                 |   26 --
 en-US/Automatic_Partitioning_common-title.xml                  |    8 
 en-US/Create_Storage-common-itemizedlist-1.xml                 |   17 -
 en-US/Create_Storage-common-itemizedlist-2.xml                 |   27 --
 en-US/Create_Storage-common-itemizedlist-3.xml                 |   27 --
 en-US/Deleting_Partitions-x86.xml                              |   25 --
 en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml              |    9 
 en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml              |   11 
 en-US/Deleting_Partitions_x86_ppc-para-1.xml                   |   10 
 en-US/Deleting_Partitions_x86_ppc-title.xml                    |    8 
 en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml            |   48 ---
 en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml         |   17 -
 en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml       |  114 ---------
 en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml          |    9 
 en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml         |    8 
 en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml         |    8 
 en-US/Disk_Partitioning_Disk_Druid-x86.xml                     |   48 ---
 en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml      |    9 
 en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml           |    8 
 en-US/Disk_Partitioning_Disk_Druid_common-title.xml            |    5 
 en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml  |   11 
 en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml      |  125 ----------
 en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml      |   13 -
 en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml |   11 
 en-US/Disk_Partitioning_Fields-common.xml                      |   60 ----
 en-US/Disk_Partitioning_Graphical-x86.xml                      |   20 -
 en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml            |    8 
 en-US/Disk_Partitioning_Setup_common-warning-1.xml             |   11 
 en-US/Disk_Partitioning_Setup_common-warning-para-1.xml        |   10 
 en-US/Disk_Partitioning_Setup_common-warning-para-2.xml        |   10 
 en-US/Disk_Partitioning_Setup_common-warning-para-3.xml        |   10 
 en-US/Disk_Partitioning_Setup_common-warning-para-4.xml        |   10 
 en-US/Disk_Partitioning_Setup_common-warning-title.xml         |    8 
 en-US/Disk_Partitioning_x86_ppc-note-1.xml                     |    9 
 en-US/Editing_Partitions-common.xml                            |   27 --
 en-US/Loopbacktip-common.xml                                   |   14 -
 en-US/Steps_Hd_Install-x86.xml                                 |    3 
 en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml             |    6 
 en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml            |    6 
 en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml         |   42 ---
 en-US/Trouble_After_Sound.xml                                  |   34 --
 en-US/adminoptions.xml                                         |   52 +---
 en-US/vnc_Installation_Chapter.xml                             |   15 -
 en-US/vnc_Modes_Chapter.xml                                    |   16 -
 en-US/vnc_Viewer_Chapter.xml                                   |    8 
 48 files changed, 49 insertions(+), 1051 deletions(-)

New commits:
commit 850af4289faead2daf382bcd0ef0799cd6d1717d
Author: Ruediger Landmann <r.landmann at redhat.com>
Date:   Fri Apr 30 21:48:53 2010 +1000

    move verbatim content out of block elements

diff --git a/en-US/Steps_Hd_Install-x86.xml b/en-US/Steps_Hd_Install-x86.xml
index 00d77bb..7bb3214 100644
--- a/en-US/Steps_Hd_Install-x86.xml
+++ b/en-US/Steps_Hd_Install-x86.xml
@@ -28,6 +28,9 @@
 		<listitem>
 			<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Steps_Hd_Install_x86_ppc_s390_listitem_1.xml"/>
 			<!-- Using a set of CD-ROMs - Create CD-ROM ISO image files from each -->
+			
+			<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml"/>
+			<!-- screen -->
 		</listitem>
 		
 		<listitem>
diff --git a/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml b/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml
index 39352b1..1c50cd7 100644
--- a/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml
+++ b/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1.xml
@@ -1,13 +1,7 @@
 <?xml version="1.0"?>
 <!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
 ]>
 
 <para>
 	Using a set of CD-ROMs, or a DVD &mdash; Create ISO image files from each installation CD-ROM, or from the DVD. For each CD-ROM (once for the DVD), execute the following command on a Linux system:
-<screen>
-<command>dd if=/dev/cdrom of=/tmp/<replaceable>file-name</replaceable>.iso</command>
-</screen>
 </para>
\ No newline at end of file
diff --git a/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml b/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml
new file mode 100644
index 0000000..d6db5b4
--- /dev/null
+++ b/en-US/Steps_Hd_Install_x86_ppc_s390_listitem_1a.xml
@@ -0,0 +1,6 @@
+<?xml version="1.0"?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+]>
+
+<screen><command>dd if=/dev/cdrom of=/tmp/<replaceable>file-name</replaceable>.iso</command>
+</screen>
diff --git a/en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml b/en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml
index 50eee6b..a25f74b 100644
--- a/en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml
+++ b/en-US/Steps_Network_Install_x86_ppc_s390_section_2.xml
@@ -15,28 +15,16 @@
 			<para>
 				For DVD:
 			</para>
-			
-			<para>
-				<screen>
-					<command>
-					mv <replaceable>/location/of/disk/space/</replaceable>f&PRODVER;.iso <replaceable>/publicly/available/directory/</replaceable>
-					</command>
-				</screen>
-			</para>
+<screen><command>mv <replaceable>/location/of/disk/space/</replaceable>f&PRODVER;.iso <replaceable>/publicly/available/directory/</replaceable>
+</command></screen>
 		</listitem>
 		
 		<listitem>
 			<para>
 				For CDROMs:
 			</para>
-			
-			<para>
-				<screen>
-					<command>
-					mv <replaceable>/location/of/disk/space/</replaceable>f&PRODVER;-disk*.iso <replaceable>/publicly/available/directory/</replaceable>
-					</command>
-				</screen>
-			</para>
+<screen><command>mv <replaceable>/location/of/disk/space/</replaceable>f&PRODVER;-disk*.iso <replaceable>/publicly/available/directory/</replaceable>
+</command></screen>
 		</listitem>
 	</itemizedlist>
 	<para>
@@ -66,27 +54,13 @@
 	<para>
 		To export to a specific system:
 	</para>
-	
-	<para>
-		<screen>
-			<command>
-				<replaceable>/publicly/available/directory</replaceable> <replaceable>client.ip.address</replaceable>
-			</command>
-		</screen>
-	</para>
-		
+<screen><command><replaceable>/publicly/available/directory</replaceable> <replaceable>client.ip.address</replaceable>
+</command></screen>
 	<para>
 		To export to all systems use an entry such as:
 	</para>
-	
-	<para>
-		<screen>
-			<command>
-				<replaceable>/publicly/available/directory</replaceable> *
-			</command>
-		</screen>
-	</para>
-	
+<screen><command><replaceable>/publicly/available/directory</replaceable> *
+</command></screen>
 	<para>
 		Start the NFS daemon (on a Fedora system, use <command>/sbin/service nfs start</command>). If NFS is already running, reload the configuration file (on a Fedora system use <command>/sbin/service nfs reload</command>).
 	</para>
diff --git a/en-US/adminoptions.xml b/en-US/adminoptions.xml
index f8bbd10..b0444e3 100644
--- a/en-US/adminoptions.xml
+++ b/en-US/adminoptions.xml
@@ -18,8 +18,7 @@
     If you specify more than one option, separate each of the options by
     a single space. For example:
   </para>
-<screen>
-<userinput>linux <replaceable>option1</replaceable> <replaceable>option2</replaceable> <replaceable>option3</replaceable></userinput>
+<screen><userinput>linux <replaceable>option1</replaceable> <replaceable>option2</replaceable> <replaceable>option3</replaceable></userinput>
 </screen>
   <note>
     <title>Anaconda Boot Options</title>
@@ -100,8 +99,7 @@
         <userinput>gr</userinput> identify the Greek language and the
         Greek keyboard layout:
       </para>
-<screen>
-<userinput>linux lang=<replaceable>el_GR</replaceable> keymap=<replaceable>gr</replaceable></userinput>
+<screen><userinput>linux lang=<replaceable>el_GR</replaceable> keymap=<replaceable>gr</replaceable></userinput>
 </screen>
     </section>
 
@@ -116,8 +114,7 @@
         as a boot option. For example, to set the display resolution to
         1024x768, enter:
       </para>
-<screen>
-<userinput>linux resolution=<replaceable>1024x768</replaceable></userinput>
+<screen><userinput>linux resolution=<replaceable>1024x768</replaceable></userinput>
 </screen>
       <para>
         To run the installation process in
@@ -126,8 +123,7 @@
         </indexterm>
         <option>text</option> mode, enter:
       </para>
-<screen>
-<userinput>linux text</userinput>
+<screen><userinput>linux text</userinput>
 </screen>
       <para>
         To enable support for a
@@ -156,8 +152,7 @@
 	<para>
 		The boot option
 	</para>
-<screen>
-  <userinput>linux updates</userinput>
+<screen><userinput>linux updates</userinput>
 </screen>
 	<para>
 		presents you with a prompt that asks you for a floppy disk containing <application>anaconda</application> updates. You do not need to specify this option if you are performing a network installation and have already placed the updates image contents in <filename>rhupdates/</filename> on the server.
@@ -254,8 +249,7 @@
         system that uses the IP address
         <systemitem class="ipaddress">192.168.1.10</systemitem>:
       </para>
-<screen>
-<userinput>linux ip=<replaceable>192.168.1.10</replaceable> netmask=<replaceable>255.255.255.0</replaceable> gateway=<replaceable>192.168.1.1</replaceable> dns=<replaceable>192.168.1.2,192.168.1.3</replaceable></userinput>
+<screen><userinput>linux ip=<replaceable>192.168.1.10</replaceable> netmask=<replaceable>255.255.255.0</replaceable> gateway=<replaceable>192.168.1.1</replaceable> dns=<replaceable>192.168.1.2,192.168.1.3</replaceable></userinput>
 </screen>
       <!-- <note>
         <title>Configuring the Installed System</title>
@@ -316,8 +310,7 @@
         To enable remote graphical access to the installation system,
         enter two options at the prompt:
       </para>
-<screen>
-<userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable></userinput>
+<screen><userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable></userinput>
 </screen>
       <para>
         The <option>vnc</option> option enables the VNC service. The
@@ -375,8 +368,7 @@ Press &lt;enter&gt; for a shell</screen>
         <application>vncviewer</application> as a listener. In a
         terminal window, enter the command:
       </para>
-<screen>
- <userinput>vncviewer -listen</userinput>
+<screen><userinput>vncviewer -listen</userinput>
 </screen>
       <note>
         <title>Firewall Reconfiguration Required</title>
@@ -416,8 +408,7 @@ Press &lt;enter&gt; for a shell</screen>
         <prompt>boot:</prompt>
         prompt:
       </para>
-<screen>
-<userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable> vncconnect=<replaceable>desktop.mydomain.com:5500</replaceable></userinput>
+<screen><userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable> vncconnect=<replaceable>desktop.mydomain.com:5500</replaceable></userinput>
 </screen>
     </section>
 
@@ -434,8 +425,7 @@ Press &lt;enter&gt; for a shell</screen>
         prompt:
       </para>
 <!--SE: The "text" option is necessary to stop the installer switching to graphical mode and losing the telnet interface. This is expected behavior. -->
-<screen>
-<userinput>linux text telnet</userinput>
+<screen><userinput>linux text telnet</userinput>
 </screen>
       <para>
         You may then connect to the installation system with the
@@ -443,8 +433,7 @@ Press &lt;enter&gt; for a shell</screen>
         command requires the name or IP address of the installation
         system:
       </para>
-<screen>
-<userinput>telnet computer.mydomain.com</userinput>
+<screen><userinput>telnet computer.mydomain.com</userinput>
 </screen>
       <warning>
         <title>Telnet Access Requires No Password</title>
@@ -485,8 +474,7 @@ Press &lt;enter&gt; for a shell</screen>
       <prompt>boot:</prompt>
       prompt:
     </para>
-<screen>
-<userinput>linux syslog=<replaceable>192.168.1.20:514</replaceable></userinput>
+<screen><userinput>linux syslog=<replaceable>192.168.1.20:514</replaceable></userinput>
 </screen>
     <section id="sn-remote-logging-logserver">
       <title>Configuring a Log Server</title>
@@ -517,16 +505,14 @@ Press &lt;enter&gt; for a shell</screen>
         <filename>/etc/rsyslog.conf</filename>. You must use
         <systemitem class="username">root</systemitem> privileges to
         edit the file <filename>/etc/rsyslog.conf</filename>. Uncomment the
-	following lines by removing the hash preceding them:
-	<screen><computeroutput>$ModLoad imudp.so</computeroutput>
-	<computeroutput>$UDPServerRun 514</computeroutput></screen>
-      </para>
+	following lines by removing the hash preceding them:</para>
+<screen><computeroutput>$ModLoad imudp.so</computeroutput> 
+<computeroutput>$UDPServerRun 514</computeroutput></screen>
       <para>
         Restart the <command>rsyslog</command> service to apply the
         change:
       </para>
-<screen>
-<userinput>su -c '/sbin/service rsyslog restart'</userinput>
+<screen><userinput>su -c '/sbin/service rsyslog restart'</userinput>
 </screen>
       <para>
         Enter the <systemitem class="username">root</systemitem>
@@ -597,8 +583,7 @@ Press &lt;enter&gt; for a shell</screen>
       the <option>ks</option> option to specify the name and location of
       the file:
     </para>
-<screen>
- <userinput>linux ks=<replaceable>location/kickstart-file.cfg</replaceable></userinput>
+<screen><userinput>linux ks=<replaceable>location/kickstart-file.cfg</replaceable></userinput>
 </screen>
     <para>
       You may use Kickstart files that are held on either removable
@@ -655,8 +640,7 @@ Press &lt;enter&gt; for a shell</screen>
       the application
       <wordasword>http://server.mydomain.com/kickstart.cgi</wordasword>:
     </para>
-<screen>
-<userinput>linux ks=http://server.mydomain.com/kickstart.cgi kssendmac</userinput>
+<screen><userinput>linux ks=http://server.mydomain.com/kickstart.cgi kssendmac</userinput>
 </screen>
   </section>
   <section id="sn-bootoptions-hardware">
diff --git a/en-US/vnc_Installation_Chapter.xml b/en-US/vnc_Installation_Chapter.xml
index b825812..e8f3943 100644
--- a/en-US/vnc_Installation_Chapter.xml
+++ b/en-US/vnc_Installation_Chapter.xml
@@ -87,11 +87,8 @@
 							prompt:
 						</para>
 
-						<para>
-							<screen>
-boot: <userinput>linux vnc</userinput>
-							</screen>
-						</para>
+<screen>boot: <userinput>linux vnc</userinput></screen>
+
 					</listitem>
 
 					<listitem>
@@ -120,11 +117,9 @@ boot: <userinput>linux vnc</userinput>
 							at the prompt:
 						</para>
 
-						<para>
-							<screen>
-boot: <userinput>linux vncconnect=<replaceable>HOST</replaceable></userinput>
-							</screen>
-						</para>
+
+<screen>boot: <userinput>linux vncconnect=<replaceable>HOST</replaceable></userinput></screen>
+
 					</listitem>
 				</orderedlist>
 			</listitem>
diff --git a/en-US/vnc_Modes_Chapter.xml b/en-US/vnc_Modes_Chapter.xml
index 38fd124..988aec0 100644
--- a/en-US/vnc_Modes_Chapter.xml
+++ b/en-US/vnc_Modes_Chapter.xml
@@ -44,11 +44,9 @@
 			format:
 		</para>
 
-		<para>
-			<screen>
-Running anaconda <replaceable>VERSION</replaceable>, the <replaceable>PRODUCT</replaceable> system installer - please wait...
-			</screen>
-		</para>
+
+<screen>Running anaconda <replaceable>VERSION</replaceable>, the <replaceable>PRODUCT</replaceable> system installer - please wait...</screen>
+
 
 		<para>
 			Anaconda will also tell you the IP address and
@@ -115,11 +113,9 @@ Running anaconda <replaceable>VERSION</replaceable>, the <replaceable>PRODUCT</r
 			<command>vncconnect</command> boot parameter:
 		</para>
 
-		<para>
-			<screen>
-boot: <userinput>linux vncconnect=<replaceable>HOST</replaceable></userinput>
-			</screen>
-		</para>
+
+<screen>boot: <userinput>linux vncconnect=<replaceable>HOST</replaceable></userinput></screen>
+
 
 		<para>
 			Replace HOST with your VNC viewer's IP address or
diff --git a/en-US/vnc_Viewer_Chapter.xml b/en-US/vnc_Viewer_Chapter.xml
index fc06b91..92553dd 100644
--- a/en-US/vnc_Viewer_Chapter.xml
+++ b/en-US/vnc_Viewer_Chapter.xml
@@ -34,11 +34,9 @@
 			<para>
 				VNC clients are available in the repositories of most Linux distributions. Use your package manager to search for a client for your chosen distribution. For example, on Fedora, install the <!-- RHEL vnc --><package>tigervnc</package> package:
 			</para>
-			<para>
-				<screen>
-# <userinput>yum install tigervnc</userinput><!-- RHEL vnc -->
-				</screen>
-			</para>
+
+<screen># <userinput>yum install tigervnc</userinput><!-- RHEL vnc --></screen>
+
 		</listitem>
 		<listitem>
 			<para>


commit c495d1e7329d436f1ebf0c01e981627cb8b2d125
Author: Ruediger Landmann <r.landmann at redhat.com>
Date:   Fri Apr 30 21:50:36 2010 +1000

    rm unused xml

diff --git a/en-US/Automatic_Partitioning-x86.xml b/en-US/Automatic_Partitioning-x86.xml
deleted file mode 100644
index 908e9ca..0000000
--- a/en-US/Automatic_Partitioning-x86.xml
+++ /dev/null
@@ -1,60 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s1-diskpartauto-x86">
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-title.xml"/>
-	<!-- Default Layout -->
-	
-	<!-- Begin Index terms -->
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-indexterm-1.xml"/>
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-indexterm-2.xml"/>
-	<!-- End Index terms -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-1.xml"/>
-	<!-- Automatic partitioning allows you to have some ... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-itemizedlist-1.xml"/>
-	<!-- Remove all partitions on selected drives and create default layout
-	     Remove linux partitions on selected drives and create default layout
-	     Caution
-	     Use free space on selected drives and create default layout -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-figure-1.xml"/>
-	<!-- Automatic Partitioning -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-2.xml"/>
-	<!-- Using your mouse, choose the hard drive ... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-caution-1.xml"/>
-	<!-- It is always a good idea to back up any data ... -->
-	
-	<note><title>Note</title>
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_x86_ppc-tip-para-1.xml"/>
-		<!-- If you have a RAID card, be aware that some BIOSes... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_x86_ppc-tip-para-2.xml"/>
-		<!-- A /boot/ partition is also necessary for ... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_x86_ppc-tip-para-3.xml"/>
-		<!-- If you have chosen to automatically partition your system ... -->
-	</note>
-
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-5.xml"/>
-	<!-- Select Encrypt system to encrypt all partitions...  -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-6.xml"/>
-	<!-- Use the Advanced storage options option if... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-3.xml"/>
-	<!-- To review and make any necessary changes to the partitions... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-note-1.xml"/>
-	<!-- Installation in text mode... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Automatic_Partitioning_common-para-4.xml"/>
-	<!-- Click Next once you have made your selection... -->
-	
-</section>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-figure-1.xml b/en-US/Automatic_Partitioning_common-figure-1.xml
deleted file mode 100644
index e40934c..0000000
--- a/en-US/Automatic_Partitioning_common-figure-1.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE figure PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<figure float="0"><title>Create Default Layout</title>
-	<mediaobject>
-		<imageobject><imagedata fileref="images/diskpartauto/autopart.png" format="PNG"/></imageobject>
-		<textobject><para>
-				Automatic partitioning.
-			</para>
-		</textobject>
-	</mediaobject>
-</figure>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-itemizedlist-1.xml b/en-US/Automatic_Partitioning_common-itemizedlist-1.xml
deleted file mode 100644
index 1346057..0000000
--- a/en-US/Automatic_Partitioning_common-itemizedlist-1.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
-	<listitem>
-		<para>
-			<guilabel>Use entire drive</guilabel> &mdash; select this option to remove all partitions on your hard drive(s) (this includes partitions created by other operating systems such as Windows VFAT or NTFS partitions).
-		</para>
-		<warning>
-			<title>Warning</title>
-			
-			<para>
-				If you select this option, all data on the selected hard drive(s) is removed by the installation program. Do not select this option if you have information that you want to keep on the hard drive(s) where you are installing Fedora.
-			</para>
-		</warning>
-	</listitem>
-
-	<listitem>
-		<para>
-			<guilabel>Replace existing Linux system</guilabel> &mdash; select this option to remove only Linux partitions (partitions created from a previous Linux installation). This does not remove other partitions you may have on
-			your hard drive(s) (such as VFAT or FAT32 partitions).
-		</para>
-
-	
-	</listitem>
-
-	<listitem>
-		<para>
-			<guilabel>Shrink existing system</guilabel> &mdash; select this option to resize your current data and partitions manually and install a default Fedora layout in the space that is freed.
-		</para>
-		<warning>
-			<title>Warning</title>
-			
-			<para>
-				If you shrink partitions on which other operating systems are installed, you might not be able to use those operating systems. Although this partitioning option does not destroy data, operating systems typically require some free space in their partitions. Before you resize a partition that holds an operating system that you might want to use again, find out how much space you need to leave free.
-			</para>
-		</warning>
-	</listitem>
-
-	<listitem>
-		<para>
-			<guilabel>Use free space</guilabel> &mdash; select this option to retain your current data and partitions, assuming you have enough free space available on your hard drive(s).
-		</para>
-	</listitem>
-</itemizedlist>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-para-6.xml b/en-US/Automatic_Partitioning_common-para-6.xml
deleted file mode 100644
index 3aa1e09..0000000
--- a/en-US/Automatic_Partitioning_common-para-6.xml
+++ /dev/null
@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
- "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
-
-    <para>
-      Use the <guilabel>Advanced storage options</guilabel> option if:
-      <itemizedlist>
-	<listitem>
-	  <para>
-	    You want to install Fedora to a drive connected through
-	    the <firstterm>iSCSI</firstterm> protocol.  Select
-	    <guilabel>Advanced storage options</guilabel>, then select
-	    <guilabel>Add iSCSI target</guilabel>, then select
-	    <guilabel>Add drive</guilabel>.  Provide an IP address and
-	    the iSCSI initiator name, and select <guilabel>Add
-	    drive</guilabel>.
-	  </para>
-	</listitem>
-	<listitem>
-	  <para>You want to disable a <firstterm>dmraid</firstterm>
-	  device that was detected at boot time. <!-- Need more here,
-	  but how?  PWF. --></para>
-	</listitem>
-      </itemizedlist>
-    </para>
diff --git a/en-US/Automatic_Partitioning_common-title.xml b/en-US/Automatic_Partitioning_common-title.xml
deleted file mode 100644
index 22f94f5..0000000
--- a/en-US/Automatic_Partitioning_common-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Create Default Layout</title>
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-itemizedlist-1.xml b/en-US/Create_Storage-common-itemizedlist-1.xml
deleted file mode 100644
index 2df12a0..0000000
--- a/en-US/Create_Storage-common-itemizedlist-1.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
-	<title>Create Partition</title>
-	<para>
-		Refer to 
-	</para>
-	<listitem>
-		<para>
-			<guilabel>Standard Partition</guilabel> — create a standard disk partition (as described in <xref linkend="ch-partitions-x86"/>) in unallocated space.
-		</para>
-	</listitem>
-	
-</itemizedlist>
-
diff --git a/en-US/Create_Storage-common-itemizedlist-2.xml b/en-US/Create_Storage-common-itemizedlist-2.xml
deleted file mode 100644
index 822915a..0000000
--- a/en-US/Create_Storage-common-itemizedlist-2.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
-	<title>Create Software RAID</title>
-	<para>
-		Refer to 
-	</para>
-	<listitem>
-		<para>
-			<guilabel>RAID Partition</guilabel> — create a partition in unallocated space to form part of a software RAID device. To form a software RAID device, two or more RAID partitions must be available on the system.
-		</para>
-	</listitem>
-	<listitem>
-		<para>
-			<guilabel>RAID Device</guilabel> — combine two or more RAID partitions into a software RAID device. When you choose this option, you can specify the type of RAID device to create (the <firstterm>RAID level</firstterm>. This option is only available when two or more RAID partitions are available on the system. 
-		</para>
-	</listitem>
-	<listitem>
-		<para>
-			<guilabel>RAID Clone</guilabel> — create a mirror of a RAID partition on one storage device on another storage device. This option is only available when at least one RAID partition is available on the system.
-		</para>
-	</listitem>
-	
-</itemizedlist>
-
diff --git a/en-US/Create_Storage-common-itemizedlist-3.xml b/en-US/Create_Storage-common-itemizedlist-3.xml
deleted file mode 100644
index 04a8c03..0000000
--- a/en-US/Create_Storage-common-itemizedlist-3.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
-    <title>Create LVM</title>
-    <para>
-	    Refer to 
-    </para>
-    <listitem>
-	    <para>
-		    <guilabel>LVM Physical Volume</guilabel> — create a <firstterm>physical volume</firstterm> in unallocated space.
-	    </para>
-    </listitem>
-    <listitem>
-	    <para>
-		    <guilabel>LVM Volume Group</guilabel> — create a <firstterm>volume group</firstterm> from one or more physical volumes. This option is only available when at least one physical volume is available on the system.
-	    </para>
-    </listitem>
-    <listitem>
-	    <para>
-		    <guilabel>LVM Logical Volume</guilabel> — create a <firstterm>logical volume</firstterm> on a volume group. This option is only available when at least one volume group is available on the system.
-	    </para>
-    </listitem>
-    
-</itemizedlist>
-
diff --git a/en-US/Deleting_Partitions-x86.xml b/en-US/Deleting_Partitions-x86.xml
deleted file mode 100644
index a60bdac..0000000
--- a/en-US/Deleting_Partitions-x86.xml
+++ /dev/null
@@ -1,25 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-diskpartdelete-x86">
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Deleting_Partitions_x86_ppc-title.xml"/>
-	<!-- Deleting Partitions -->
-	
-	<!-- Begin Index Terms -->
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Deleting_Partitions_x86_ppc-indexterm-1.xml"/>
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Deleting_Partitions_x86_ppc-indexterm-2.xml"/>
-	<!-- End Index Terms -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Deleting_Partitions_x86_ppc-para-1.xml"/>
-	<!-- To delete a partition, highlight it in the ... -->
-	 
-	<para>
-		  For further installation instructions for x86, AMD64, and <trademark class="registered">Intel</trademark> 64 systems, skip to <xref linkend="s1-x86-bootloader"/>.
-	</para>
-	 
-	<!-- <para>
-		For further installation instructions for Itanium systems, skip to <xref linkend="s1-netconfig-x86"/>.
-	</para> -->
-</section>
diff --git a/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml b/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml
deleted file mode 100644
index 1609f03..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
-	<primary><application>Partitioning</application>
-	</primary>
-	<secondary>deleting partitions</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml b/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml
deleted file mode 100644
index 8fc165b..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<indexterm significance="normal">
-	<primary>partitioning</primary>
-	<secondary>deleting</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-para-1.xml b/en-US/Deleting_Partitions_x86_ppc-para-1.xml
deleted file mode 100644
index ca3043d..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-para-1.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	To delete a partition, highlight it in the <guilabel>Partitions</guilabel> section and click the <guibutton>Delete</guibutton> button. Confirm the deletion when prompted.
-</para>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-title.xml b/en-US/Deleting_Partitions_x86_ppc-title.xml
deleted file mode 100644
index 8fc5013..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Deleting a Partition</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml b/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml
deleted file mode 100644
index a7b576b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
-	<para>
-		<guibutton>LVM</guibutton>: Allows you to create an LVM logical volume. The role of LVM (Logical Volume Manager) is to present a simple logical view of underlying physical storage space, such as a hard drive(s). LVM manages individual physical disks &mdash; or to be more precise, the individual partitions present on them. <emphasis>It should only be used if you have experience using LVM.</emphasis> <!-- Reference to RHEL Deployment Guide: To read more about LVM, refer to the <citetitle>Red Hat Enterprise Linux Deployment Guide</citetitle>.--> Note, LVM is only available in the graphical installation program.
-	</para>
-
-          <para>
-            To assign one or more physical volumes to a volume group,
-	    first name the volume group. Then select the physical
-	    volumes to be used in the volume group. Finally, configure
-	    logical volumes on any volume groups using the
-	    <guilabel>Add</guilabel>, <guilabel>Edit</guilabel> and
-	    <guilabel>Delete</guilabel> options.
-          </para>
-          <para>
-            You may not remove a physical volume from a volume group if
-	    doing so would leave insufficient space for that group's
-	    logical volumes. Take for example a volume group made up of
-	    two 5 GB LVM physical volume partitions, which contains an 8
-	    GB logical volume. The installer would not allow you to
-	    remove either of the component physical volumes, since that
-	    would leave only 5 GB in the group for an 8 GB logical
-	    volume. If you reduce the total size of any logical volumes
-	    appropriately, you may then remove a physical volume from
-	    the volume group. In the example, reducing the size of the
-	    logical volume to 4 GB would allow you to remove one of the
-	    5 GB physical volumes.
-          </para>
-	  <important>
-	    <title>LVM Unavailable in Text Installs</title>
-	    <para>LVM initial set up is not available in a text-mode
-	      installation.  The installer allows you to edit
-	      pre-configured LVM volumes.  If you need to create an LVM
-	      configuration from scratch, hit <keycombo>
-		<keycap function="alt">Alt</keycap>
-		<keycap function="other" otherfunction="F2">F2</keycap>
-	      </keycombo> to use the terminal, and run the
-	      <command>lvm</command> command.  To return to the
-	      text-mode installation, hit <keycombo>
-		<keycap function="alt">Alt</keycap>
-		<keycap function="other" otherfunction="F1">F1</keycap>
-	      </keycombo>.</para>
-	  </important>
-
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml b/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml
deleted file mode 100644
index 37f3ef5..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
-	<para>
-		<guibutton>Delete</guibutton>: Used to remove the partition currently highlighted in the <guilabel>Current Disk Partitions</guilabel> section. You will be asked to confirm the deletion of any partition.
-	</para>
-	<para>To delete an LVM
-	    physical volume, first delete any volume groups of which
-	    that physical volume is a member.
-          </para>
-          <para>
-            If you make a mistake, use the <guilabel>Reset</guilabel>
-	    option to abandon all the changes you have made.
-          </para>
-</listitem>
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml b/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml
deleted file mode 100644
index cc7d7ba..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
-	<para>
-		<guibutton>RAID</guibutton>: Used to provide redundancy to any or all disk partitions. <emphasis>It should only be used if you have experience using RAID.</emphasis> <!-- Reference to RHEL Deployment Guide: To read more about RAID, refer to the <citetitle>Red Hat Enterprise Linux Deployment Guide</citetitle>. -->
-	</para>
-
-	<para>
-		To make a RAID device, you must first create software RAID partitions. Once you have created two or more software RAID partitions, select <guibutton>RAID</guibutton> to join the software RAID partitions into a RAID device.
-	</para>
-
-	<warning>
-		<title>Intel BIOS-RAID</title>
-		<para>
-			In Fedora 12, <application>anaconda</application> uses <application>mdraid</application> instead of <application>dmraid</application> to access Intel BIOS-RAID sets that use the Intel Matrix Storage Manager metadata format. <application>Mdraid</application> supports Intel Matrix Storage Manager RAID 0, RAID 1, RAID 5, and RAID 10 sets.
-		</para>
-		<para>
-			If you have Intel BIOS-RAID sets on your system that use the Intel Matrix Storage Manager metadata format and you upgrade from a previous version of Fedora, the device node names will change. Therefore, take special precautions when upgrading systems that incorporate this hardware.
-		</para>
-		<para>
-			By default, Fedora does not refer to these devices by their device node names, but uses UUID, so you should not encounter problems if you upgrade a system with a default Fedora installations.
-		</para>
-		<para>
-			However, on installations with local modifications to <filename>/etc/fstab</filename>, <filename>/etc/crypttab</filename>, or to other configuration files which refer to device node names, you must manually edit the affected files to refer to the devices by UUID instead of by device node path. You can use the output of the <command>blkid</command> command to obtain the UUIDs of the devices on your system.
-		</para>
-	</warning>
-
-	<figure float="0" id="fig-diskpart-makeraid-x86"><title>RAID options</title>
-		<mediaobject>
-			<imageobject><imagedata fileref="images/diskpartitioning/raid-options.png" format="PNG"/></imageobject>
-			<textobject><para>
-					The RAID options dialog.
-				</para>
-			</textobject>
-		</mediaobject>
-	</figure>
-
-	          <variablelist>
-            <varlistentry>
-              <term><guilabel>Create a software RAID
-		  partition</guilabel></term>
-              <listitem>
-                <para>
-                  Choose this option to add a partition for software
-		  RAID. This option is the only choice available if your
-		  disk contains no software RAID partitions.
-                </para>
-		
-			<figure float="0" id="fig-diskpart-software-raid-x86"><title>Create a software RAID partition</title>
-				<mediaobject>
-					<imageobject><imagedata fileref="images/diskpartitioning/software-raid.png" format="PNG"/></imageobject>
-					<textobject><para>
-							The create a software RAID partition dialog.
-						</para>
-					</textobject>
-				</mediaobject>
-			</figure>
-
-		
-              </listitem>
-            </varlistentry>
-
-
-            <varlistentry>
-              <term><guilabel>Create a RAID device</guilabel></term>
-              <listitem>
-                <para>
-                  Choose this option to construct a RAID device from two
-		  or more existing software RAID partitions. This option
-		  is available if two or more software RAID partitions
-		  have been configured.
-                </para>
-		
-			<figure float="0" id="fig-diskpart-raid-device-x86"><title>Create a RAID device</title>
-				<mediaobject>
-					<imageobject><imagedata fileref="images/diskpartitioning/raid-device.png" format="PNG"/></imageobject>
-					<textobject><para>
-							The create a RAID device dialog.
-						</para>
-					</textobject>
-				</mediaobject>
-			</figure>
-		
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><guilabel>Clone a drive to create a RAID
-		  device</guilabel></term>
-              <listitem>
-                <para>
-                  Choose this option to set up a RAID
-		  <firstterm>mirror</firstterm> of an existing disk.
-		  This option is available if two or more disks are
-		  attached to the system.
-                </para>
-                
-			<figure float="0" id="fig-diskpart-clone-raid-x86"><title>Clone a RAID device</title>
-				<mediaobject>
-					<imageobject><imagedata fileref="images/diskpartitioning/raid-clone.png" format="PNG"/></imageobject>
-					<textobject><para>
-							The clone a RAID device dialog.
-						</para>
-					</textobject>
-				</mediaobject>
-			</figure>
-		
-              </listitem>
-            </varlistentry>
-          </variablelist>
-
-</listitem>
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml b/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml
deleted file mode 100644
index ea1f0e2..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
-	<para>
-		<guibutton>Reset</guibutton>: Used to restore the partitioning screen to its original state. All changes made will be lost if you <guibutton>Reset</guibutton> the partitions.
-	</para>
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml b/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml
deleted file mode 100644
index 42b0017..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
-	<primary>RAID</primary>
-	<secondary>creating a software RAID</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml b/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml
deleted file mode 100644
index 38d3d22..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
-	<primary>RAID</primary>
-	<secondary>partitioning a RAID</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86.xml b/en-US/Disk_Partitioning_Disk_Druid-x86.xml
deleted file mode 100644
index 399b288..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-diskpartitioning-dd-x86">
-
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_common-title.xml"/>
-	<!-- The partitioning screen -->
-	
-	<!-- Index terms -->
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_common-indexterm-1.xml"/>
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml"/>
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml"/>
-	<!-- End Index terms -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_common-para-1.xml"/>
-	<!--These buttons are used... -->
-	
-	<itemizedlist>
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml"/>
-		<!-- New: Used to request a new partition -->
-		
-		<listitem>
-			<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml"/>
-			<!-- Edit: Used to modify attributes of the partition -->
-			
-			<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml"/>
-			<!-- You can also edit free space as represented in... -->
-		</listitem>
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml"/>
-		<!-- To make a RAID device, you must first create... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-listitem-delete.xml"/>
-		<!-- Delete: Used to remove the partition... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-listitem-reset.xml"/>
-		<!-- Reset: Used to restore Disk Druid to its original state... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-listitem-makeraid.xml"/>
-		<!-- RAID: Used to provide redundancy ... -->
-		
-		<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Disk_Druid-listitem-LVM.xml"/>
-		<!-- LVM: Allows you to create an LVM logical volume. -->
-		
-	</itemizedlist>
-</section>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml b/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml
deleted file mode 100644
index 2ccce8b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
-	<primary><application>Partitioning</application>
-	</primary>
-	<secondary>buttons</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml b/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml
deleted file mode 100644
index def25fb..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<para>
-	These buttons are used to change the attributes of a partition (for example the file system type and mount point) and also to create RAID devices. Buttons on this screen are
-	also used to accept the changes you have made, or to exit the partitioning screen. For further explanation, take a look at each button in order:
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-title.xml b/en-US/Disk_Partitioning_Disk_Druid_common-title.xml
deleted file mode 100644
index f74cd9b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-title.xml
+++ /dev/null
@@ -1,5 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<title>The partitioning screen</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml b/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml
deleted file mode 100644
index e610040..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	<guibutton>Edit</guibutton>: Used to modify attributes of the partition currently selected in the <guilabel>Partitions</guilabel> section. Selecting <guibutton>Edit</guibutton> opens a dialog box. Some
-	or all of the fields can be edited, depending on whether the partition information has already been written to disk.
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml
deleted file mode 100644
index 439db1c..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml
+++ /dev/null
@@ -1,125 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
-	<para>
-		<guibutton>New</guibutton>: Select this option to add a partition
-            or LVM physical
-              volume to the disk. In the <guilabel>Add
-              partition</guilabel> dialog, choose a mount point and a
-              partition type. If you have more than one disk on the
-              system, choose which disks the partition may inhabit.
-              Indicate a size in megabytes for the partition.  If you
-              wish to encrypt the partition, select that option.
-          </para>
-          <important>
-            <title>Illegal Partitions</title>
-
-            <para>
-              <indexterm>
-                <primary>partition</primary>
-                <secondary>illegal</secondary>
-              </indexterm> You cannot create separate partitions for the <filename>/bin/</filename>,
-	      <filename>/dev/</filename>, <filename>/etc/</filename>,
-	      <filename>/lib/</filename>, <filename>/proc/</filename>,
-	      <filename>/root/</filename>, and
-	      <filename>/sbin/</filename> directories. These directories must reside on the
-              <indexterm>
-                <primary>partition</primary>
-                <secondary>root</secondary>
-              </indexterm> <filename>/</filename> (root) partition.
-            </para>
-
-            <para>
-              The <filename>/boot</filename> partition may not reside on
-	      an LVM volume group. Create the <filename>/boot</filename>
-	      partition before configuring any volume groups. Furthermore, you cannot use the btrfs file system for the <filename>/boot</filename> partition.
-            </para>
-	    
-	    <para>
-	      Avoid placing <filename>/usr</filename> on a separate partition. If <filename>/usr</filename> does not reside on the <filename>/</filename> (root) partition, the boot process becomes more complex and some systems (for example, those with iSCSI storage) will fail to boot. 
-	    </para>
-	    
-          </important>
-          <para>
-            You may also choose from three options for sizing your
-	    partition:
-          </para>
-          <variablelist>
-            <varlistentry>
-              <term><guilabel>Fixed size</guilabel></term>
-              <listitem>
-                <para>
-                  Use a fixed size as close to your entry as possible.
-                </para>
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><guilabel>Fill all space up to</guilabel></term>
-              <listitem>
-                <para>
-                  Grow the partition to a maximum size of your choice.
-                </para>
-              </listitem>
-            </varlistentry>
-
-            <varlistentry>
-              <term><guilabel>Fill to maximum allowable
-		  size</guilabel></term>
-              <listitem>
-                <para>
-                  Grow the partition until it fills the remainder of the
-		  selected disks.
-                </para>
-              </listitem>
-            </varlistentry>
-          </variablelist>
-          <note>
-            <title>Partition Sizes</title>
-
-            <para>
-              The actual partition on the disk may be slightly smaller
-	      or larger than your choice. Disk geometry issues cause
-	      this effect, not an error or bug.
-            </para>
-          </note>
-	  <para>
-	    Select the <guilabel>Encrypt partition</guilabel> option to
-	    encrypt all information on the disk partition.
-	  </para>
-          <para>
-            After you enter the details for your partition, select
-            <guibutton>OK</guibutton> to continue.  If you chose to
-            encrypt the partition, the installer prompts you to assign a
-            passphrase by typing it twice.  For hints on using good
-            passphrases, refer to <xref linkend="sn-account_configuration"/>.
-          </para>
-        </listitem>
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml
deleted file mode 100644
index 670d691..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<listitem>
-	<para>
-		To make a RAID device, you must first create (or reuse existing) software RAID partitions. Once you have created two or more software RAID partitions, select <guibutton>Make RAID</guibutton> to join the software RAID partitions into a
-		RAID device.
-	</para>
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml
deleted file mode 100644
index 8a5014d..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	You can also edit free space as represented in the graphical display to create a new partition within that space. Either highlight the free space and then select the <guibutton>Edit</guibutton> button, or double-click on the free space to
-	edit it.
-</para>
diff --git a/en-US/Disk_Partitioning_Fields-common.xml b/en-US/Disk_Partitioning_Fields-common.xml
deleted file mode 100644
index 3216c74..0000000
--- a/en-US/Disk_Partitioning_Fields-common.xml
+++ /dev/null
@@ -1,60 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-	  
-<section>
-	<title>Partition Fields</title>
-		
-	<para>
-		Above the partition hierarchy are labels which present information about the partitions you are creating. The labels are defined as follows:
-	</para>
-		
-	<itemizedlist>
-		<listitem>
-			<para>
-				<guilabel>Device</guilabel>: This field displays the partition's device name.
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>Mount Point/RAID/Volume</guilabel>: A mount point is the location within the directory hierarchy at which a volume exists; the volume is "mounted" at this location. This field indicates where the partition is mounted. If a
-				partition exists, but is not set, then you need to define its mount point. Double-click on the partition or click the <guibutton>Edit</guibutton> button.
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>Type</guilabel>: This field shows the partition's file system type (for example, ext2, ext3, ext4, or vfat).
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>Format</guilabel>: This field shows if the partition being created will be formatted.
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>Size (MB)</guilabel>: This field shows the partition's size (in MB).
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>Start</guilabel>: This field shows the cylinder on your hard drive where the partition begins.
-			</para>
-		</listitem>
-
-		<listitem>
-			<para>
-				<guilabel>End</guilabel>: This field shows the cylinder on your hard drive where the partition ends.
-			</para>
-		</listitem>
-	</itemizedlist>
-		
-	<para>
-		<guilabel>Hide RAID device/LVM Volume Group members</guilabel>: Select this option if you do not want to view any RAID device or LVM Volume Group members that have been created.
-	</para>
-</section>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Graphical-x86.xml b/en-US/Disk_Partitioning_Graphical-x86.xml
deleted file mode 100644
index 4e5e82c..0000000
--- a/en-US/Disk_Partitioning_Graphical-x86.xml
+++ /dev/null
@@ -1,20 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section>
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_x86_ppc-title.xml"/>
-	<!-- Title: Graphical Display of Hard Drives -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"/>
-	<!-- The partitioning screen offers a graphical representation... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-1.xml"/>
-	<!-- Using your mouse, click once to highlight a particular field... -->
-	
-	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Disk_Partitioning_Graphical_common-para-2.xml"/>
-	<!-- Using your mouse, click once to highlight a particular field... -->
-	
-</section>
-	
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml b/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml
deleted file mode 100644
index bcb55a4..0000000
--- a/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-	  
-	  
-	  
-]>
-
-<title>Graphical Display of Hard Drive(s)</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-1.xml b/en-US/Disk_Partitioning_Setup_common-warning-1.xml
deleted file mode 100644
index ace5575..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-1.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE warning PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<warning>
-	<title>Warning</title>
-
-	<para>
-		The <!-- (RHEL) <application>Red Hat Update Agent</application> --> <application>PackageKit</application> update software downloads updated packages to <filename>/var/cache/yum/</filename> by default. If you partition the system manually, and create a separate <filename>/var/</filename> partition, be sure to create the partition large enough (3.0 GB or more) to download package updates.
-	</para>
-</warning>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml b/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml
deleted file mode 100644
index df19e88..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-		If you receive an error after the <guilabel>Disk Partitioning Setup</guilabel> phase of the installation saying something similar to:
-	</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml b/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml
deleted file mode 100644
index 3d35450..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	"The partition table on device hda was unreadable. To create new partitions it must be initialized, causing the loss of ALL DATA on this drive."
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml b/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml
deleted file mode 100644
index a17d19e..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	you may not have a partition table on that drive or the partition table on the drive may not be recognizable by the partitioning software used in the installation program.
-</para>
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml b/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml
deleted file mode 100644
index bf47421..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
-	No matter what type of installation you are performing, backups of the existing data on your systems should always be made.
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-title.xml b/en-US/Disk_Partitioning_Setup_common-warning-title.xml
deleted file mode 100644
index 12f418f..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Warning</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_x86_ppc-note-1.xml b/en-US/Disk_Partitioning_x86_ppc-note-1.xml
deleted file mode 100644
index 9db1744..0000000
--- a/en-US/Disk_Partitioning_x86_ppc-note-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE note PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<note>
-	<para>
-		Please note that in the text mode installation it is not possible to work with LVM (Logical Volumes) beyond viewing the existing setup. LVM can only be set up during graphical installation.
-	</para>
-</note>
\ No newline at end of file
diff --git a/en-US/Editing_Partitions-common.xml b/en-US/Editing_Partitions-common.xml
deleted file mode 100644
index 57799a0..0000000
--- a/en-US/Editing_Partitions-common.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section>
-	<title>Editing Partitions</title>
-	<indexterm significance="normal">
-		<primary><application>Partitioning</application>
-		</primary>
-		<secondary>editing partitions</secondary>
-	</indexterm>
-	<indexterm significance="normal">
-		<primary>partitioning</primary>
-		<secondary>editing</secondary>
-	</indexterm>
-	<para>
-		To edit a partition, select the <guibutton>Edit</guibutton> button or double-click on the existing partition.
-	</para>
-	 
-	<note>
-		<title>Note</title>
-
-		<para>
-			If the partition already exists on your disk, you can only change the partition's mount point. To make any other changes, you must delete the partition and recreate it.
-		</para>
-	</note>
-</section>
diff --git a/en-US/Loopbacktip-common.xml b/en-US/Loopbacktip-common.xml
deleted file mode 100644
index 8255f45..0000000
--- a/en-US/Loopbacktip-common.xml
+++ /dev/null
@@ -1,14 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE tip PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<note><title>Note</title>
-<para>
-	You can save disk space by using the ISO images you have already copied to the server. To accomplish this, install Fedora using ISO images without copying them into a single tree by loopback mounting them. For each ISO image:
-</para>
-<para><command>mkdir disc<replaceable>X</replaceable></command></para>  
-<para><command>mount -o loop Fedora&PRODVER;-disc<replaceable>X</replaceable>.iso disc<replaceable>X</replaceable></command></para>
-
-
-<para>Replace <command>X</command> with the corresponding disc number.</para>
-</note>
diff --git a/en-US/Trouble_After_Sound.xml b/en-US/Trouble_After_Sound.xml
deleted file mode 100644
index 226578c..0000000
--- a/en-US/Trouble_After_Sound.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-trouble-sound">
-	<title>Problems with Sound Configuration</title>
-	<indexterm significance="normal">
-		<primary>troubleshooting</primary>
-		<secondary>after the installation</secondary>
-		<tertiary>sound configuration</tertiary>
-	</indexterm>
-	<para>
-		If, for some reason, you do not hear sound and know that you do have a sound card installed, you can run the <application moreinfo="none">Sound Card Configuration Tool</application> (<command moreinfo="none">system-config-soundcard</command>) utility.
-	</para>
-	 
-	<para>
-		To use the <application moreinfo="none">Sound Card Configuration Tool</application>, choose <guimenu moreinfo="none">Main Menu</guimenu> =&gt; <guimenuitem moreinfo="none">System </guimenuitem> =&gt; <guimenuitem moreinfo="none">Administration </guimenuitem> =&gt; <guimenuitem moreinfo="none">Soundcard
-		Detection</guimenuitem> in GNOME, or <guimenu moreinfo="none">Main Menu</guimenu> =&gt; <guimenuitem moreinfo="none">Computer </guimenuitem> =&gt; <guimenuitem moreinfo="none">System Settings</guimenuitem> =&gt; <guimenuitem moreinfo="none">Multimedia</guimenuitem> in KDE. A small text box pops up prompting you for your root password.
-	</para>
-	 
-	<para>
-		You can also type the <command moreinfo="none">system-config-soundcard</command> command at a shell prompt to launch the <application moreinfo="none">Sound Card Configuration Tool</application>. If you are not root, it prompts you for the root password
-		to continue.
-	</para>
-	 
-	<!-- <para>
-		To run the text-based configuration tool, as root, type <command moreinfo="none">sndconfig</command> in a terminal window. Note, the <command moreinfo="none">sndconfig</command> application is not installed by default but can be found on the Red Hat
-		Enterprise Linux CD-ROMs.
-	</para> -->
-	 
-	<para>
-		If the <application moreinfo="none">Sound Card Configuration Tool</application> does not work (if the sample does not play and you still do not have audio sounds), it is likely that your sound card is not yet supported in Fedora.
-	</para>
-</section>




More information about the docs-commits mailing list