[amateur-radio-guide/f14: 7/7] Added po files
sparks
sparks at fedoraproject.org
Wed Oct 13 15:18:51 UTC 2010
commit ed0c82e5e1a63a93d50ca3e2b1275ff95fcb12cc
Author: Eric H Christensen <eric at christensenplace.us>
Date: Wed Oct 13 10:47:13 2010 -0400
Added po files
cs-CZ/Amateur_Radio_Guide.po | 34 +++
cs-CZ/Article_Info.po | 29 +++
cs-CZ/Author_Group.po | 19 ++
cs-CZ/Installing_Software.po | 311 ++++++++++++++++++++++++
cs-CZ/Revision_History.po | 104 ++++++++
cs-CZ/antenna-nec2c.po | 36 +++
cs-CZ/antenna-splat.po | 290 ++++++++++++++++++++++
cs-CZ/antenna-xnec2c.po | 50 ++++
cs-CZ/antenna.po | 24 ++
cs-CZ/circuit-geda.po | 29 +++
cs-CZ/circuit-gerbv.po | 24 ++
cs-CZ/circuit-gnucap.po | 24 ++
cs-CZ/circuit-gspiceui.po | 29 +++
cs-CZ/circuit-iverilog.po | 24 ++
cs-CZ/circuit-kicad.po | 24 ++
cs-CZ/circuit-ngspice.po | 24 ++
cs-CZ/circuit-pcb.po | 24 ++
cs-CZ/circuit-qucs.po | 24 ++
cs-CZ/circuit-xcircuit.po | 24 ++
cs-CZ/circuit.po | 24 ++
cs-CZ/logging-LinLog.po | 36 +++
cs-CZ/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
cs-CZ/logging-xlog.po | 79 ++++++
cs-CZ/logging.po | 24 ++
cs-CZ/others-aldo.po | 24 ++
cs-CZ/others-cwdaemon.po | 24 ++
cs-CZ/others-cwirc.po | 61 +++++
cs-CZ/others-demorse.po | 24 ++
cs-CZ/others-dxcc.po | 24 ++
cs-CZ/others-echolinux.po | 24 ++
cs-CZ/others-gpredict.po | 24 ++
cs-CZ/others-gpsman.po | 24 ++
cs-CZ/others-gresistor.po | 24 ++
cs-CZ/others-gridloc.po | 24 ++
cs-CZ/others-gtkwave.po | 24 ++
cs-CZ/others-ibp.po | 136 +++++++++++
cs-CZ/others-morse2txt.po | 24 ++
cs-CZ/others-ssbd.po | 24 ++
cs-CZ/others-svxlink.po | 24 ++
cs-CZ/others-thebridge.po | 24 ++
cs-CZ/others-tqsllib.po | 24 ++
cs-CZ/others-trustedqsl.po | 24 ++
cs-CZ/others-unixcw.po | 24 ++
cs-CZ/others-wxapt.po | 24 ++
cs-CZ/others-xgridloc.po | 99 ++++++++
cs-CZ/others-xwota.po | 24 ++
cs-CZ/others-xwxapt.po | 24 ++
cs-CZ/others.po | 24 ++
cs-CZ/packet-aprsd.po | 24 ++
cs-CZ/packet-ax25-apps.po | 24 ++
cs-CZ/packet-ax25-tools.po | 24 ++
cs-CZ/packet-colordx.po | 45 ++++
cs-CZ/packet-libax25.po | 24 ++
cs-CZ/packet-node.po | 24 ++
cs-CZ/packet-xastir.po | 24 ++
cs-CZ/packet-xconvers.po | 24 ++
cs-CZ/packet-xdx.po | 24 ++
cs-CZ/packet.po | 24 ++
cs-CZ/rig-grig.po | 39 +++
cs-CZ/rig-hamlib.po | 37 +++
cs-CZ/rig.po | 24 ++
cs-CZ/sdr-gnuradio.po | 36 +++
cs-CZ/sdr.po | 24 ++
cs-CZ/soundcard-fldigi.po | 29 +++
cs-CZ/soundcard-gmfsk.po | 34 +++
cs-CZ/soundcard-gpsk31.po | 31 +++
cs-CZ/soundcard-linpsk.po | 43 ++++
cs-CZ/soundcard-lpsk31.po | 37 +++
cs-CZ/soundcard-qsstv.po | 33 +++
cs-CZ/soundcard-xfhell.po | 32 +++
cs-CZ/soundcard-xpsk31.po | 35 +++
cs-CZ/soundcard.po | 24 ++
de-DE/Amateur_Radio_Guide.po | 34 +++
de-DE/Article_Info.po | 29 +++
de-DE/Author_Group.po | 19 ++
de-DE/Installing_Software.po | 311 ++++++++++++++++++++++++
de-DE/Revision_History.po | 104 ++++++++
de-DE/antenna-nec2c.po | 36 +++
de-DE/antenna-splat.po | 290 ++++++++++++++++++++++
de-DE/antenna-xnec2c.po | 50 ++++
de-DE/antenna.po | 24 ++
de-DE/circuit-geda.po | 29 +++
de-DE/circuit-gerbv.po | 24 ++
de-DE/circuit-gnucap.po | 24 ++
de-DE/circuit-gspiceui.po | 29 +++
de-DE/circuit-iverilog.po | 24 ++
de-DE/circuit-kicad.po | 24 ++
de-DE/circuit-ngspice.po | 24 ++
de-DE/circuit-pcb.po | 24 ++
de-DE/circuit-qucs.po | 24 ++
de-DE/circuit-xcircuit.po | 24 ++
de-DE/circuit.po | 24 ++
de-DE/logging-LinLog.po | 36 +++
de-DE/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
de-DE/logging-xlog.po | 79 ++++++
de-DE/logging.po | 24 ++
de-DE/others-aldo.po | 24 ++
de-DE/others-cwdaemon.po | 24 ++
de-DE/others-cwirc.po | 61 +++++
de-DE/others-demorse.po | 24 ++
de-DE/others-dxcc.po | 24 ++
de-DE/others-echolinux.po | 24 ++
de-DE/others-gpredict.po | 24 ++
de-DE/others-gpsman.po | 24 ++
de-DE/others-gresistor.po | 24 ++
de-DE/others-gridloc.po | 24 ++
de-DE/others-gtkwave.po | 24 ++
de-DE/others-ibp.po | 136 +++++++++++
de-DE/others-morse2txt.po | 24 ++
de-DE/others-ssbd.po | 24 ++
de-DE/others-svxlink.po | 24 ++
de-DE/others-thebridge.po | 24 ++
de-DE/others-tqsllib.po | 24 ++
de-DE/others-trustedqsl.po | 24 ++
de-DE/others-unixcw.po | 24 ++
de-DE/others-wxapt.po | 24 ++
de-DE/others-xgridloc.po | 99 ++++++++
de-DE/others-xwota.po | 24 ++
de-DE/others-xwxapt.po | 24 ++
de-DE/others.po | 24 ++
de-DE/packet-aprsd.po | 24 ++
de-DE/packet-ax25-apps.po | 24 ++
de-DE/packet-ax25-tools.po | 24 ++
de-DE/packet-colordx.po | 45 ++++
de-DE/packet-libax25.po | 24 ++
de-DE/packet-node.po | 24 ++
de-DE/packet-xastir.po | 24 ++
de-DE/packet-xconvers.po | 24 ++
de-DE/packet-xdx.po | 24 ++
de-DE/packet.po | 24 ++
de-DE/rig-grig.po | 39 +++
de-DE/rig-hamlib.po | 37 +++
de-DE/rig.po | 24 ++
de-DE/sdr-gnuradio.po | 36 +++
de-DE/sdr.po | 24 ++
de-DE/soundcard-fldigi.po | 29 +++
de-DE/soundcard-gmfsk.po | 34 +++
de-DE/soundcard-gpsk31.po | 31 +++
de-DE/soundcard-linpsk.po | 43 ++++
de-DE/soundcard-lpsk31.po | 37 +++
de-DE/soundcard-qsstv.po | 33 +++
de-DE/soundcard-xfhell.po | 32 +++
de-DE/soundcard-xpsk31.po | 35 +++
de-DE/soundcard.po | 24 ++
el-GR/Amateur_Radio_Guide.po | 34 +++
el-GR/Article_Info.po | 29 +++
el-GR/Author_Group.po | 19 ++
el-GR/Installing_Software.po | 311 ++++++++++++++++++++++++
el-GR/Revision_History.po | 104 ++++++++
el-GR/antenna-nec2c.po | 36 +++
el-GR/antenna-splat.po | 290 ++++++++++++++++++++++
el-GR/antenna-xnec2c.po | 50 ++++
el-GR/antenna.po | 24 ++
el-GR/circuit-geda.po | 29 +++
el-GR/circuit-gerbv.po | 24 ++
el-GR/circuit-gnucap.po | 24 ++
el-GR/circuit-gspiceui.po | 29 +++
el-GR/circuit-iverilog.po | 24 ++
el-GR/circuit-kicad.po | 24 ++
el-GR/circuit-ngspice.po | 24 ++
el-GR/circuit-pcb.po | 24 ++
el-GR/circuit-qucs.po | 24 ++
el-GR/circuit-xcircuit.po | 24 ++
el-GR/circuit.po | 24 ++
el-GR/logging-LinLog.po | 36 +++
el-GR/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
el-GR/logging-xlog.po | 79 ++++++
el-GR/logging.po | 24 ++
el-GR/others-aldo.po | 24 ++
el-GR/others-cwdaemon.po | 24 ++
el-GR/others-cwirc.po | 61 +++++
el-GR/others-demorse.po | 24 ++
el-GR/others-dxcc.po | 24 ++
el-GR/others-echolinux.po | 24 ++
el-GR/others-gpredict.po | 24 ++
el-GR/others-gpsman.po | 24 ++
el-GR/others-gresistor.po | 24 ++
el-GR/others-gridloc.po | 24 ++
el-GR/others-gtkwave.po | 24 ++
el-GR/others-ibp.po | 136 +++++++++++
el-GR/others-morse2txt.po | 24 ++
el-GR/others-ssbd.po | 24 ++
el-GR/others-svxlink.po | 24 ++
el-GR/others-thebridge.po | 24 ++
el-GR/others-tqsllib.po | 24 ++
el-GR/others-trustedqsl.po | 24 ++
el-GR/others-unixcw.po | 24 ++
el-GR/others-wxapt.po | 24 ++
el-GR/others-xgridloc.po | 99 ++++++++
el-GR/others-xwota.po | 24 ++
el-GR/others-xwxapt.po | 24 ++
el-GR/others.po | 24 ++
el-GR/packet-aprsd.po | 24 ++
el-GR/packet-ax25-apps.po | 24 ++
el-GR/packet-ax25-tools.po | 24 ++
el-GR/packet-colordx.po | 45 ++++
el-GR/packet-libax25.po | 24 ++
el-GR/packet-node.po | 24 ++
el-GR/packet-xastir.po | 24 ++
el-GR/packet-xconvers.po | 24 ++
el-GR/packet-xdx.po | 24 ++
el-GR/packet.po | 24 ++
el-GR/rig-grig.po | 39 +++
el-GR/rig-hamlib.po | 37 +++
el-GR/rig.po | 24 ++
el-GR/sdr-gnuradio.po | 36 +++
el-GR/sdr.po | 24 ++
el-GR/soundcard-fldigi.po | 29 +++
el-GR/soundcard-gmfsk.po | 34 +++
el-GR/soundcard-gpsk31.po | 31 +++
el-GR/soundcard-linpsk.po | 43 ++++
el-GR/soundcard-lpsk31.po | 37 +++
el-GR/soundcard-qsstv.po | 33 +++
el-GR/soundcard-xfhell.po | 32 +++
el-GR/soundcard-xpsk31.po | 35 +++
el-GR/soundcard.po | 24 ++
es-ES/Amateur_Radio_Guide.po | 34 +++
es-ES/Article_Info.po | 29 +++
es-ES/Author_Group.po | 19 ++
es-ES/Installing_Software.po | 311 ++++++++++++++++++++++++
es-ES/Revision_History.po | 104 ++++++++
es-ES/antenna-nec2c.po | 36 +++
es-ES/antenna-splat.po | 290 ++++++++++++++++++++++
es-ES/antenna-xnec2c.po | 50 ++++
es-ES/antenna.po | 24 ++
es-ES/circuit-geda.po | 29 +++
es-ES/circuit-gerbv.po | 24 ++
es-ES/circuit-gnucap.po | 24 ++
es-ES/circuit-gspiceui.po | 29 +++
es-ES/circuit-iverilog.po | 24 ++
es-ES/circuit-kicad.po | 24 ++
es-ES/circuit-ngspice.po | 24 ++
es-ES/circuit-pcb.po | 24 ++
es-ES/circuit-qucs.po | 24 ++
es-ES/circuit-xcircuit.po | 24 ++
es-ES/circuit.po | 24 ++
es-ES/logging-LinLog.po | 36 +++
es-ES/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
es-ES/logging-xlog.po | 79 ++++++
es-ES/logging.po | 24 ++
es-ES/others-aldo.po | 24 ++
es-ES/others-cwdaemon.po | 24 ++
es-ES/others-cwirc.po | 61 +++++
es-ES/others-demorse.po | 24 ++
es-ES/others-dxcc.po | 24 ++
es-ES/others-echolinux.po | 24 ++
es-ES/others-gpredict.po | 24 ++
es-ES/others-gpsman.po | 24 ++
es-ES/others-gresistor.po | 24 ++
es-ES/others-gridloc.po | 24 ++
es-ES/others-gtkwave.po | 24 ++
es-ES/others-ibp.po | 136 +++++++++++
es-ES/others-morse2txt.po | 24 ++
es-ES/others-ssbd.po | 24 ++
es-ES/others-svxlink.po | 24 ++
es-ES/others-thebridge.po | 24 ++
es-ES/others-tqsllib.po | 24 ++
es-ES/others-trustedqsl.po | 24 ++
es-ES/others-unixcw.po | 24 ++
es-ES/others-wxapt.po | 24 ++
es-ES/others-xgridloc.po | 99 ++++++++
es-ES/others-xwota.po | 24 ++
es-ES/others-xwxapt.po | 24 ++
es-ES/others.po | 24 ++
es-ES/packet-aprsd.po | 24 ++
es-ES/packet-ax25-apps.po | 24 ++
es-ES/packet-ax25-tools.po | 24 ++
es-ES/packet-colordx.po | 45 ++++
es-ES/packet-libax25.po | 24 ++
es-ES/packet-node.po | 24 ++
es-ES/packet-xastir.po | 24 ++
es-ES/packet-xconvers.po | 24 ++
es-ES/packet-xdx.po | 24 ++
es-ES/packet.po | 24 ++
es-ES/rig-grig.po | 39 +++
es-ES/rig-hamlib.po | 37 +++
es-ES/rig.po | 24 ++
es-ES/sdr-gnuradio.po | 36 +++
es-ES/sdr.po | 24 ++
es-ES/soundcard-fldigi.po | 29 +++
es-ES/soundcard-gmfsk.po | 34 +++
es-ES/soundcard-gpsk31.po | 31 +++
es-ES/soundcard-linpsk.po | 43 ++++
es-ES/soundcard-lpsk31.po | 37 +++
es-ES/soundcard-qsstv.po | 33 +++
es-ES/soundcard-xfhell.po | 32 +++
es-ES/soundcard-xpsk31.po | 35 +++
es-ES/soundcard.po | 24 ++
fi-FI/Amateur_Radio_Guide.po | 34 +++
fi-FI/Article_Info.po | 29 +++
fi-FI/Author_Group.po | 19 ++
fi-FI/Installing_Software.po | 311 ++++++++++++++++++++++++
fi-FI/Revision_History.po | 104 ++++++++
fi-FI/antenna-nec2c.po | 36 +++
fi-FI/antenna-splat.po | 290 ++++++++++++++++++++++
fi-FI/antenna-xnec2c.po | 50 ++++
fi-FI/antenna.po | 24 ++
fi-FI/circuit-geda.po | 29 +++
fi-FI/circuit-gerbv.po | 24 ++
fi-FI/circuit-gnucap.po | 24 ++
fi-FI/circuit-gspiceui.po | 29 +++
fi-FI/circuit-iverilog.po | 24 ++
fi-FI/circuit-kicad.po | 24 ++
fi-FI/circuit-ngspice.po | 24 ++
fi-FI/circuit-pcb.po | 24 ++
fi-FI/circuit-qucs.po | 24 ++
fi-FI/circuit-xcircuit.po | 24 ++
fi-FI/circuit.po | 24 ++
fi-FI/logging-LinLog.po | 36 +++
fi-FI/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
fi-FI/logging-xlog.po | 79 ++++++
fi-FI/logging.po | 24 ++
fi-FI/others-aldo.po | 24 ++
fi-FI/others-cwdaemon.po | 24 ++
fi-FI/others-cwirc.po | 61 +++++
fi-FI/others-demorse.po | 24 ++
fi-FI/others-dxcc.po | 24 ++
fi-FI/others-echolinux.po | 24 ++
fi-FI/others-gpredict.po | 24 ++
fi-FI/others-gpsman.po | 24 ++
fi-FI/others-gresistor.po | 24 ++
fi-FI/others-gridloc.po | 24 ++
fi-FI/others-gtkwave.po | 24 ++
fi-FI/others-ibp.po | 136 +++++++++++
fi-FI/others-morse2txt.po | 24 ++
fi-FI/others-ssbd.po | 24 ++
fi-FI/others-svxlink.po | 24 ++
fi-FI/others-thebridge.po | 24 ++
fi-FI/others-tqsllib.po | 24 ++
fi-FI/others-trustedqsl.po | 24 ++
fi-FI/others-unixcw.po | 24 ++
fi-FI/others-wxapt.po | 24 ++
fi-FI/others-xgridloc.po | 99 ++++++++
fi-FI/others-xwota.po | 24 ++
fi-FI/others-xwxapt.po | 24 ++
fi-FI/others.po | 24 ++
fi-FI/packet-aprsd.po | 24 ++
fi-FI/packet-ax25-apps.po | 24 ++
fi-FI/packet-ax25-tools.po | 24 ++
fi-FI/packet-colordx.po | 45 ++++
fi-FI/packet-libax25.po | 24 ++
fi-FI/packet-node.po | 24 ++
fi-FI/packet-xastir.po | 24 ++
fi-FI/packet-xconvers.po | 24 ++
fi-FI/packet-xdx.po | 24 ++
fi-FI/packet.po | 24 ++
fi-FI/rig-grig.po | 39 +++
fi-FI/rig-hamlib.po | 37 +++
fi-FI/rig.po | 24 ++
fi-FI/sdr-gnuradio.po | 36 +++
fi-FI/sdr.po | 24 ++
fi-FI/soundcard-fldigi.po | 29 +++
fi-FI/soundcard-gmfsk.po | 34 +++
fi-FI/soundcard-gpsk31.po | 31 +++
fi-FI/soundcard-linpsk.po | 43 ++++
fi-FI/soundcard-lpsk31.po | 37 +++
fi-FI/soundcard-qsstv.po | 33 +++
fi-FI/soundcard-xfhell.po | 32 +++
fi-FI/soundcard-xpsk31.po | 35 +++
fi-FI/soundcard.po | 24 ++
fr-FR/Amateur_Radio_Guide.po | 34 +++
fr-FR/Article_Info.po | 29 +++
fr-FR/Author_Group.po | 19 ++
fr-FR/Installing_Software.po | 311 ++++++++++++++++++++++++
fr-FR/Revision_History.po | 104 ++++++++
fr-FR/antenna-nec2c.po | 36 +++
fr-FR/antenna-splat.po | 290 ++++++++++++++++++++++
fr-FR/antenna-xnec2c.po | 50 ++++
fr-FR/antenna.po | 24 ++
fr-FR/circuit-geda.po | 29 +++
fr-FR/circuit-gerbv.po | 24 ++
fr-FR/circuit-gnucap.po | 24 ++
fr-FR/circuit-gspiceui.po | 29 +++
fr-FR/circuit-iverilog.po | 24 ++
fr-FR/circuit-kicad.po | 24 ++
fr-FR/circuit-ngspice.po | 24 ++
fr-FR/circuit-pcb.po | 24 ++
fr-FR/circuit-qucs.po | 24 ++
fr-FR/circuit-xcircuit.po | 24 ++
fr-FR/circuit.po | 24 ++
fr-FR/logging-LinLog.po | 36 +++
fr-FR/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
fr-FR/logging-xlog.po | 79 ++++++
fr-FR/logging.po | 24 ++
fr-FR/others-aldo.po | 24 ++
fr-FR/others-cwdaemon.po | 24 ++
fr-FR/others-cwirc.po | 61 +++++
fr-FR/others-demorse.po | 24 ++
fr-FR/others-dxcc.po | 24 ++
fr-FR/others-echolinux.po | 24 ++
fr-FR/others-gpredict.po | 24 ++
fr-FR/others-gpsman.po | 24 ++
fr-FR/others-gresistor.po | 24 ++
fr-FR/others-gridloc.po | 24 ++
fr-FR/others-gtkwave.po | 24 ++
fr-FR/others-ibp.po | 136 +++++++++++
fr-FR/others-morse2txt.po | 24 ++
fr-FR/others-ssbd.po | 24 ++
fr-FR/others-svxlink.po | 24 ++
fr-FR/others-thebridge.po | 24 ++
fr-FR/others-tqsllib.po | 24 ++
fr-FR/others-trustedqsl.po | 24 ++
fr-FR/others-unixcw.po | 24 ++
fr-FR/others-wxapt.po | 24 ++
fr-FR/others-xgridloc.po | 99 ++++++++
fr-FR/others-xwota.po | 24 ++
fr-FR/others-xwxapt.po | 24 ++
fr-FR/others.po | 24 ++
fr-FR/packet-aprsd.po | 24 ++
fr-FR/packet-ax25-apps.po | 24 ++
fr-FR/packet-ax25-tools.po | 24 ++
fr-FR/packet-colordx.po | 45 ++++
fr-FR/packet-libax25.po | 24 ++
fr-FR/packet-node.po | 24 ++
fr-FR/packet-xastir.po | 24 ++
fr-FR/packet-xconvers.po | 24 ++
fr-FR/packet-xdx.po | 24 ++
fr-FR/packet.po | 24 ++
fr-FR/rig-grig.po | 39 +++
fr-FR/rig-hamlib.po | 37 +++
fr-FR/rig.po | 24 ++
fr-FR/sdr-gnuradio.po | 36 +++
fr-FR/sdr.po | 24 ++
fr-FR/soundcard-fldigi.po | 29 +++
fr-FR/soundcard-gmfsk.po | 34 +++
fr-FR/soundcard-gpsk31.po | 31 +++
fr-FR/soundcard-linpsk.po | 43 ++++
fr-FR/soundcard-lpsk31.po | 37 +++
fr-FR/soundcard-qsstv.po | 33 +++
fr-FR/soundcard-xfhell.po | 32 +++
fr-FR/soundcard-xpsk31.po | 35 +++
fr-FR/soundcard.po | 24 ++
he-IL/Amateur_Radio_Guide.po | 34 +++
he-IL/Article_Info.po | 29 +++
he-IL/Author_Group.po | 19 ++
he-IL/Installing_Software.po | 311 ++++++++++++++++++++++++
he-IL/Revision_History.po | 104 ++++++++
he-IL/antenna-nec2c.po | 36 +++
he-IL/antenna-splat.po | 290 ++++++++++++++++++++++
he-IL/antenna-xnec2c.po | 50 ++++
he-IL/antenna.po | 24 ++
he-IL/circuit-geda.po | 29 +++
he-IL/circuit-gerbv.po | 24 ++
he-IL/circuit-gnucap.po | 24 ++
he-IL/circuit-gspiceui.po | 29 +++
he-IL/circuit-iverilog.po | 24 ++
he-IL/circuit-kicad.po | 24 ++
he-IL/circuit-ngspice.po | 24 ++
he-IL/circuit-pcb.po | 24 ++
he-IL/circuit-qucs.po | 24 ++
he-IL/circuit-xcircuit.po | 24 ++
he-IL/circuit.po | 24 ++
he-IL/logging-LinLog.po | 36 +++
he-IL/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
he-IL/logging-xlog.po | 79 ++++++
he-IL/logging.po | 24 ++
he-IL/others-aldo.po | 24 ++
he-IL/others-cwdaemon.po | 24 ++
he-IL/others-cwirc.po | 61 +++++
he-IL/others-demorse.po | 24 ++
he-IL/others-dxcc.po | 24 ++
he-IL/others-echolinux.po | 24 ++
he-IL/others-gpredict.po | 24 ++
he-IL/others-gpsman.po | 24 ++
he-IL/others-gresistor.po | 24 ++
he-IL/others-gridloc.po | 24 ++
he-IL/others-gtkwave.po | 24 ++
he-IL/others-ibp.po | 136 +++++++++++
he-IL/others-morse2txt.po | 24 ++
he-IL/others-ssbd.po | 24 ++
he-IL/others-svxlink.po | 24 ++
he-IL/others-thebridge.po | 24 ++
he-IL/others-tqsllib.po | 24 ++
he-IL/others-trustedqsl.po | 24 ++
he-IL/others-unixcw.po | 24 ++
he-IL/others-wxapt.po | 24 ++
he-IL/others-xgridloc.po | 99 ++++++++
he-IL/others-xwota.po | 24 ++
he-IL/others-xwxapt.po | 24 ++
he-IL/others.po | 24 ++
he-IL/packet-aprsd.po | 24 ++
he-IL/packet-ax25-apps.po | 24 ++
he-IL/packet-ax25-tools.po | 24 ++
he-IL/packet-colordx.po | 45 ++++
he-IL/packet-libax25.po | 24 ++
he-IL/packet-node.po | 24 ++
he-IL/packet-xastir.po | 24 ++
he-IL/packet-xconvers.po | 24 ++
he-IL/packet-xdx.po | 24 ++
he-IL/packet.po | 24 ++
he-IL/rig-grig.po | 39 +++
he-IL/rig-hamlib.po | 37 +++
he-IL/rig.po | 24 ++
he-IL/sdr-gnuradio.po | 36 +++
he-IL/sdr.po | 24 ++
he-IL/soundcard-fldigi.po | 29 +++
he-IL/soundcard-gmfsk.po | 34 +++
he-IL/soundcard-gpsk31.po | 31 +++
he-IL/soundcard-linpsk.po | 43 ++++
he-IL/soundcard-lpsk31.po | 37 +++
he-IL/soundcard-qsstv.po | 33 +++
he-IL/soundcard-xfhell.po | 32 +++
he-IL/soundcard-xpsk31.po | 35 +++
he-IL/soundcard.po | 24 ++
id-ID/Amateur_Radio_Guide.po | 34 +++
id-ID/Article_Info.po | 29 +++
id-ID/Author_Group.po | 19 ++
id-ID/Installing_Software.po | 311 ++++++++++++++++++++++++
id-ID/Revision_History.po | 104 ++++++++
id-ID/antenna-nec2c.po | 36 +++
id-ID/antenna-splat.po | 290 ++++++++++++++++++++++
id-ID/antenna-xnec2c.po | 50 ++++
id-ID/antenna.po | 24 ++
id-ID/circuit-geda.po | 29 +++
id-ID/circuit-gerbv.po | 24 ++
id-ID/circuit-gnucap.po | 24 ++
id-ID/circuit-gspiceui.po | 29 +++
id-ID/circuit-iverilog.po | 24 ++
id-ID/circuit-kicad.po | 24 ++
id-ID/circuit-ngspice.po | 24 ++
id-ID/circuit-pcb.po | 24 ++
id-ID/circuit-qucs.po | 24 ++
id-ID/circuit-xcircuit.po | 24 ++
id-ID/circuit.po | 24 ++
id-ID/logging-LinLog.po | 36 +++
id-ID/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
id-ID/logging-xlog.po | 79 ++++++
id-ID/logging.po | 24 ++
id-ID/others-aldo.po | 24 ++
id-ID/others-cwdaemon.po | 24 ++
id-ID/others-cwirc.po | 61 +++++
id-ID/others-demorse.po | 24 ++
id-ID/others-dxcc.po | 24 ++
id-ID/others-echolinux.po | 24 ++
id-ID/others-gpredict.po | 24 ++
id-ID/others-gpsman.po | 24 ++
id-ID/others-gresistor.po | 24 ++
id-ID/others-gridloc.po | 24 ++
id-ID/others-gtkwave.po | 24 ++
id-ID/others-ibp.po | 136 +++++++++++
id-ID/others-morse2txt.po | 24 ++
id-ID/others-ssbd.po | 24 ++
id-ID/others-svxlink.po | 24 ++
id-ID/others-thebridge.po | 24 ++
id-ID/others-tqsllib.po | 24 ++
id-ID/others-trustedqsl.po | 24 ++
id-ID/others-unixcw.po | 24 ++
id-ID/others-wxapt.po | 24 ++
id-ID/others-xgridloc.po | 99 ++++++++
id-ID/others-xwota.po | 24 ++
id-ID/others-xwxapt.po | 24 ++
id-ID/others.po | 24 ++
id-ID/packet-aprsd.po | 24 ++
id-ID/packet-ax25-apps.po | 24 ++
id-ID/packet-ax25-tools.po | 24 ++
id-ID/packet-colordx.po | 45 ++++
id-ID/packet-libax25.po | 24 ++
id-ID/packet-node.po | 24 ++
id-ID/packet-xastir.po | 24 ++
id-ID/packet-xconvers.po | 24 ++
id-ID/packet-xdx.po | 24 ++
id-ID/packet.po | 24 ++
id-ID/rig-grig.po | 39 +++
id-ID/rig-hamlib.po | 37 +++
id-ID/rig.po | 24 ++
id-ID/sdr-gnuradio.po | 36 +++
id-ID/sdr.po | 24 ++
id-ID/soundcard-fldigi.po | 29 +++
id-ID/soundcard-gmfsk.po | 34 +++
id-ID/soundcard-gpsk31.po | 31 +++
id-ID/soundcard-linpsk.po | 43 ++++
id-ID/soundcard-lpsk31.po | 37 +++
id-ID/soundcard-qsstv.po | 33 +++
id-ID/soundcard-xfhell.po | 32 +++
id-ID/soundcard-xpsk31.po | 35 +++
id-ID/soundcard.po | 24 ++
it-IT/Amateur_Radio_Guide.po | 34 +++
it-IT/Article_Info.po | 29 +++
it-IT/Author_Group.po | 19 ++
it-IT/Installing_Software.po | 311 ++++++++++++++++++++++++
it-IT/Revision_History.po | 104 ++++++++
it-IT/antenna-nec2c.po | 36 +++
it-IT/antenna-splat.po | 290 ++++++++++++++++++++++
it-IT/antenna-xnec2c.po | 50 ++++
it-IT/antenna.po | 24 ++
it-IT/circuit-geda.po | 29 +++
it-IT/circuit-gerbv.po | 24 ++
it-IT/circuit-gnucap.po | 24 ++
it-IT/circuit-gspiceui.po | 29 +++
it-IT/circuit-iverilog.po | 24 ++
it-IT/circuit-kicad.po | 24 ++
it-IT/circuit-ngspice.po | 24 ++
it-IT/circuit-pcb.po | 24 ++
it-IT/circuit-qucs.po | 24 ++
it-IT/circuit-xcircuit.po | 24 ++
it-IT/circuit.po | 24 ++
it-IT/logging-LinLog.po | 36 +++
it-IT/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
it-IT/logging-xlog.po | 79 ++++++
it-IT/logging.po | 24 ++
it-IT/others-aldo.po | 24 ++
it-IT/others-cwdaemon.po | 24 ++
it-IT/others-cwirc.po | 61 +++++
it-IT/others-demorse.po | 24 ++
it-IT/others-dxcc.po | 24 ++
it-IT/others-echolinux.po | 24 ++
it-IT/others-gpredict.po | 24 ++
it-IT/others-gpsman.po | 24 ++
it-IT/others-gresistor.po | 24 ++
it-IT/others-gridloc.po | 24 ++
it-IT/others-gtkwave.po | 24 ++
it-IT/others-ibp.po | 136 +++++++++++
it-IT/others-morse2txt.po | 24 ++
it-IT/others-ssbd.po | 24 ++
it-IT/others-svxlink.po | 24 ++
it-IT/others-thebridge.po | 24 ++
it-IT/others-tqsllib.po | 24 ++
it-IT/others-trustedqsl.po | 24 ++
it-IT/others-unixcw.po | 24 ++
it-IT/others-wxapt.po | 24 ++
it-IT/others-xgridloc.po | 99 ++++++++
it-IT/others-xwota.po | 24 ++
it-IT/others-xwxapt.po | 24 ++
it-IT/others.po | 24 ++
it-IT/packet-aprsd.po | 24 ++
it-IT/packet-ax25-apps.po | 24 ++
it-IT/packet-ax25-tools.po | 24 ++
it-IT/packet-colordx.po | 45 ++++
it-IT/packet-libax25.po | 24 ++
it-IT/packet-node.po | 24 ++
it-IT/packet-xastir.po | 24 ++
it-IT/packet-xconvers.po | 24 ++
it-IT/packet-xdx.po | 24 ++
it-IT/packet.po | 24 ++
it-IT/rig-grig.po | 39 +++
it-IT/rig-hamlib.po | 37 +++
it-IT/rig.po | 24 ++
it-IT/sdr-gnuradio.po | 36 +++
it-IT/sdr.po | 24 ++
it-IT/soundcard-fldigi.po | 29 +++
it-IT/soundcard-gmfsk.po | 34 +++
it-IT/soundcard-gpsk31.po | 31 +++
it-IT/soundcard-linpsk.po | 43 ++++
it-IT/soundcard-lpsk31.po | 37 +++
it-IT/soundcard-qsstv.po | 33 +++
it-IT/soundcard-xfhell.po | 32 +++
it-IT/soundcard-xpsk31.po | 35 +++
it-IT/soundcard.po | 24 ++
ja-JP/Amateur_Radio_Guide.po | 34 +++
ja-JP/Article_Info.po | 29 +++
ja-JP/Author_Group.po | 19 ++
ja-JP/Installing_Software.po | 311 ++++++++++++++++++++++++
ja-JP/Revision_History.po | 104 ++++++++
ja-JP/antenna-nec2c.po | 36 +++
ja-JP/antenna-splat.po | 290 ++++++++++++++++++++++
ja-JP/antenna-xnec2c.po | 50 ++++
ja-JP/antenna.po | 24 ++
ja-JP/circuit-geda.po | 29 +++
ja-JP/circuit-gerbv.po | 24 ++
ja-JP/circuit-gnucap.po | 24 ++
ja-JP/circuit-gspiceui.po | 29 +++
ja-JP/circuit-iverilog.po | 24 ++
ja-JP/circuit-kicad.po | 24 ++
ja-JP/circuit-ngspice.po | 24 ++
ja-JP/circuit-pcb.po | 24 ++
ja-JP/circuit-qucs.po | 24 ++
ja-JP/circuit-xcircuit.po | 24 ++
ja-JP/circuit.po | 24 ++
ja-JP/logging-LinLog.po | 36 +++
ja-JP/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
ja-JP/logging-xlog.po | 79 ++++++
ja-JP/logging.po | 24 ++
ja-JP/others-aldo.po | 24 ++
ja-JP/others-cwdaemon.po | 24 ++
ja-JP/others-cwirc.po | 61 +++++
ja-JP/others-demorse.po | 24 ++
ja-JP/others-dxcc.po | 24 ++
ja-JP/others-echolinux.po | 24 ++
ja-JP/others-gpredict.po | 24 ++
ja-JP/others-gpsman.po | 24 ++
ja-JP/others-gresistor.po | 24 ++
ja-JP/others-gridloc.po | 24 ++
ja-JP/others-gtkwave.po | 24 ++
ja-JP/others-ibp.po | 136 +++++++++++
ja-JP/others-morse2txt.po | 24 ++
ja-JP/others-ssbd.po | 24 ++
ja-JP/others-svxlink.po | 24 ++
ja-JP/others-thebridge.po | 24 ++
ja-JP/others-tqsllib.po | 24 ++
ja-JP/others-trustedqsl.po | 24 ++
ja-JP/others-unixcw.po | 24 ++
ja-JP/others-wxapt.po | 24 ++
ja-JP/others-xgridloc.po | 99 ++++++++
ja-JP/others-xwota.po | 24 ++
ja-JP/others-xwxapt.po | 24 ++
ja-JP/others.po | 24 ++
ja-JP/packet-aprsd.po | 24 ++
ja-JP/packet-ax25-apps.po | 24 ++
ja-JP/packet-ax25-tools.po | 24 ++
ja-JP/packet-colordx.po | 45 ++++
ja-JP/packet-libax25.po | 24 ++
ja-JP/packet-node.po | 24 ++
ja-JP/packet-xastir.po | 24 ++
ja-JP/packet-xconvers.po | 24 ++
ja-JP/packet-xdx.po | 24 ++
ja-JP/packet.po | 24 ++
ja-JP/rig-grig.po | 39 +++
ja-JP/rig-hamlib.po | 37 +++
ja-JP/rig.po | 24 ++
ja-JP/sdr-gnuradio.po | 36 +++
ja-JP/sdr.po | 24 ++
ja-JP/soundcard-fldigi.po | 29 +++
ja-JP/soundcard-gmfsk.po | 34 +++
ja-JP/soundcard-gpsk31.po | 31 +++
ja-JP/soundcard-linpsk.po | 43 ++++
ja-JP/soundcard-lpsk31.po | 37 +++
ja-JP/soundcard-qsstv.po | 33 +++
ja-JP/soundcard-xfhell.po | 32 +++
ja-JP/soundcard-xpsk31.po | 35 +++
ja-JP/soundcard.po | 24 ++
nl-NL/Amateur_Radio_Guide.po | 34 +++
nl-NL/Article_Info.po | 29 +++
nl-NL/Author_Group.po | 19 ++
nl-NL/Installing_Software.po | 311 ++++++++++++++++++++++++
nl-NL/Revision_History.po | 104 ++++++++
nl-NL/antenna-nec2c.po | 36 +++
nl-NL/antenna-splat.po | 290 ++++++++++++++++++++++
nl-NL/antenna-xnec2c.po | 50 ++++
nl-NL/antenna.po | 24 ++
nl-NL/circuit-geda.po | 29 +++
nl-NL/circuit-gerbv.po | 24 ++
nl-NL/circuit-gnucap.po | 24 ++
nl-NL/circuit-gspiceui.po | 29 +++
nl-NL/circuit-iverilog.po | 24 ++
nl-NL/circuit-kicad.po | 24 ++
nl-NL/circuit-ngspice.po | 24 ++
nl-NL/circuit-pcb.po | 24 ++
nl-NL/circuit-qucs.po | 24 ++
nl-NL/circuit-xcircuit.po | 24 ++
nl-NL/circuit.po | 24 ++
nl-NL/logging-LinLog.po | 36 +++
nl-NL/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
nl-NL/logging-xlog.po | 79 ++++++
nl-NL/logging.po | 24 ++
nl-NL/others-aldo.po | 24 ++
nl-NL/others-cwdaemon.po | 24 ++
nl-NL/others-cwirc.po | 61 +++++
nl-NL/others-demorse.po | 24 ++
nl-NL/others-dxcc.po | 24 ++
nl-NL/others-echolinux.po | 24 ++
nl-NL/others-gpredict.po | 24 ++
nl-NL/others-gpsman.po | 24 ++
nl-NL/others-gresistor.po | 24 ++
nl-NL/others-gridloc.po | 24 ++
nl-NL/others-gtkwave.po | 24 ++
nl-NL/others-ibp.po | 136 +++++++++++
nl-NL/others-morse2txt.po | 24 ++
nl-NL/others-ssbd.po | 24 ++
nl-NL/others-svxlink.po | 24 ++
nl-NL/others-thebridge.po | 24 ++
nl-NL/others-tqsllib.po | 24 ++
nl-NL/others-trustedqsl.po | 24 ++
nl-NL/others-unixcw.po | 24 ++
nl-NL/others-wxapt.po | 24 ++
nl-NL/others-xgridloc.po | 99 ++++++++
nl-NL/others-xwota.po | 24 ++
nl-NL/others-xwxapt.po | 24 ++
nl-NL/others.po | 24 ++
nl-NL/packet-aprsd.po | 24 ++
nl-NL/packet-ax25-apps.po | 24 ++
nl-NL/packet-ax25-tools.po | 24 ++
nl-NL/packet-colordx.po | 45 ++++
nl-NL/packet-libax25.po | 24 ++
nl-NL/packet-node.po | 24 ++
nl-NL/packet-xastir.po | 24 ++
nl-NL/packet-xconvers.po | 24 ++
nl-NL/packet-xdx.po | 24 ++
nl-NL/packet.po | 24 ++
nl-NL/rig-grig.po | 39 +++
nl-NL/rig-hamlib.po | 37 +++
nl-NL/rig.po | 24 ++
nl-NL/sdr-gnuradio.po | 36 +++
nl-NL/sdr.po | 24 ++
nl-NL/soundcard-fldigi.po | 29 +++
nl-NL/soundcard-gmfsk.po | 34 +++
nl-NL/soundcard-gpsk31.po | 31 +++
nl-NL/soundcard-linpsk.po | 43 ++++
nl-NL/soundcard-lpsk31.po | 37 +++
nl-NL/soundcard-qsstv.po | 33 +++
nl-NL/soundcard-xfhell.po | 32 +++
nl-NL/soundcard-xpsk31.po | 35 +++
nl-NL/soundcard.po | 24 ++
pl-PL/Amateur_Radio_Guide.po | 34 +++
pl-PL/Article_Info.po | 29 +++
pl-PL/Author_Group.po | 19 ++
pl-PL/Installing_Software.po | 311 ++++++++++++++++++++++++
pl-PL/Revision_History.po | 104 ++++++++
pl-PL/antenna-nec2c.po | 36 +++
pl-PL/antenna-splat.po | 290 ++++++++++++++++++++++
pl-PL/antenna-xnec2c.po | 50 ++++
pl-PL/antenna.po | 24 ++
pl-PL/circuit-geda.po | 29 +++
pl-PL/circuit-gerbv.po | 24 ++
pl-PL/circuit-gnucap.po | 24 ++
pl-PL/circuit-gspiceui.po | 29 +++
pl-PL/circuit-iverilog.po | 24 ++
pl-PL/circuit-kicad.po | 24 ++
pl-PL/circuit-ngspice.po | 24 ++
pl-PL/circuit-pcb.po | 24 ++
pl-PL/circuit-qucs.po | 24 ++
pl-PL/circuit-xcircuit.po | 24 ++
pl-PL/circuit.po | 24 ++
pl-PL/logging-LinLog.po | 36 +++
pl-PL/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
pl-PL/logging-xlog.po | 79 ++++++
pl-PL/logging.po | 24 ++
pl-PL/others-aldo.po | 24 ++
pl-PL/others-cwdaemon.po | 24 ++
pl-PL/others-cwirc.po | 61 +++++
pl-PL/others-demorse.po | 24 ++
pl-PL/others-dxcc.po | 24 ++
pl-PL/others-echolinux.po | 24 ++
pl-PL/others-gpredict.po | 24 ++
pl-PL/others-gpsman.po | 24 ++
pl-PL/others-gresistor.po | 24 ++
pl-PL/others-gridloc.po | 24 ++
pl-PL/others-gtkwave.po | 24 ++
pl-PL/others-ibp.po | 136 +++++++++++
pl-PL/others-morse2txt.po | 24 ++
pl-PL/others-ssbd.po | 24 ++
pl-PL/others-svxlink.po | 24 ++
pl-PL/others-thebridge.po | 24 ++
pl-PL/others-tqsllib.po | 24 ++
pl-PL/others-trustedqsl.po | 24 ++
pl-PL/others-unixcw.po | 24 ++
pl-PL/others-wxapt.po | 24 ++
pl-PL/others-xgridloc.po | 99 ++++++++
pl-PL/others-xwota.po | 24 ++
pl-PL/others-xwxapt.po | 24 ++
pl-PL/others.po | 24 ++
pl-PL/packet-aprsd.po | 24 ++
pl-PL/packet-ax25-apps.po | 24 ++
pl-PL/packet-ax25-tools.po | 24 ++
pl-PL/packet-colordx.po | 45 ++++
pl-PL/packet-libax25.po | 24 ++
pl-PL/packet-node.po | 24 ++
pl-PL/packet-xastir.po | 24 ++
pl-PL/packet-xconvers.po | 24 ++
pl-PL/packet-xdx.po | 24 ++
pl-PL/packet.po | 24 ++
pl-PL/rig-grig.po | 39 +++
pl-PL/rig-hamlib.po | 37 +++
pl-PL/rig.po | 24 ++
pl-PL/sdr-gnuradio.po | 36 +++
pl-PL/sdr.po | 24 ++
pl-PL/soundcard-fldigi.po | 29 +++
pl-PL/soundcard-gmfsk.po | 34 +++
pl-PL/soundcard-gpsk31.po | 31 +++
pl-PL/soundcard-linpsk.po | 43 ++++
pl-PL/soundcard-lpsk31.po | 37 +++
pl-PL/soundcard-qsstv.po | 33 +++
pl-PL/soundcard-xfhell.po | 32 +++
pl-PL/soundcard-xpsk31.po | 35 +++
pl-PL/soundcard.po | 24 ++
pt-BR/Amateur_Radio_Guide.po | 34 +++
pt-BR/Article_Info.po | 29 +++
pt-BR/Author_Group.po | 19 ++
pt-BR/Installing_Software.po | 311 ++++++++++++++++++++++++
pt-BR/Revision_History.po | 104 ++++++++
pt-BR/antenna-nec2c.po | 36 +++
pt-BR/antenna-splat.po | 290 ++++++++++++++++++++++
pt-BR/antenna-xnec2c.po | 50 ++++
pt-BR/antenna.po | 24 ++
pt-BR/circuit-geda.po | 29 +++
pt-BR/circuit-gerbv.po | 24 ++
pt-BR/circuit-gnucap.po | 24 ++
pt-BR/circuit-gspiceui.po | 29 +++
pt-BR/circuit-iverilog.po | 24 ++
pt-BR/circuit-kicad.po | 24 ++
pt-BR/circuit-ngspice.po | 24 ++
pt-BR/circuit-pcb.po | 24 ++
pt-BR/circuit-qucs.po | 24 ++
pt-BR/circuit-xcircuit.po | 24 ++
pt-BR/circuit.po | 24 ++
pt-BR/logging-LinLog.po | 36 +++
pt-BR/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
pt-BR/logging-xlog.po | 79 ++++++
pt-BR/logging.po | 24 ++
pt-BR/others-aldo.po | 24 ++
pt-BR/others-cwdaemon.po | 24 ++
pt-BR/others-cwirc.po | 61 +++++
pt-BR/others-demorse.po | 24 ++
pt-BR/others-dxcc.po | 24 ++
pt-BR/others-echolinux.po | 24 ++
pt-BR/others-gpredict.po | 24 ++
pt-BR/others-gpsman.po | 24 ++
pt-BR/others-gresistor.po | 24 ++
pt-BR/others-gridloc.po | 24 ++
pt-BR/others-gtkwave.po | 24 ++
pt-BR/others-ibp.po | 136 +++++++++++
pt-BR/others-morse2txt.po | 24 ++
pt-BR/others-ssbd.po | 24 ++
pt-BR/others-svxlink.po | 24 ++
pt-BR/others-thebridge.po | 24 ++
pt-BR/others-tqsllib.po | 24 ++
pt-BR/others-trustedqsl.po | 24 ++
pt-BR/others-unixcw.po | 24 ++
pt-BR/others-wxapt.po | 24 ++
pt-BR/others-xgridloc.po | 99 ++++++++
pt-BR/others-xwota.po | 24 ++
pt-BR/others-xwxapt.po | 24 ++
pt-BR/others.po | 24 ++
pt-BR/packet-aprsd.po | 24 ++
pt-BR/packet-ax25-apps.po | 24 ++
pt-BR/packet-ax25-tools.po | 24 ++
pt-BR/packet-colordx.po | 45 ++++
pt-BR/packet-libax25.po | 24 ++
pt-BR/packet-node.po | 24 ++
pt-BR/packet-xastir.po | 24 ++
pt-BR/packet-xconvers.po | 24 ++
pt-BR/packet-xdx.po | 24 ++
pt-BR/packet.po | 24 ++
pt-BR/rig-grig.po | 39 +++
pt-BR/rig-hamlib.po | 37 +++
pt-BR/rig.po | 24 ++
pt-BR/sdr-gnuradio.po | 36 +++
pt-BR/sdr.po | 24 ++
pt-BR/soundcard-fldigi.po | 29 +++
pt-BR/soundcard-gmfsk.po | 34 +++
pt-BR/soundcard-gpsk31.po | 31 +++
pt-BR/soundcard-linpsk.po | 43 ++++
pt-BR/soundcard-lpsk31.po | 37 +++
pt-BR/soundcard-qsstv.po | 33 +++
pt-BR/soundcard-xfhell.po | 32 +++
pt-BR/soundcard-xpsk31.po | 35 +++
pt-BR/soundcard.po | 24 ++
pt-PT/Amateur_Radio_Guide.po | 34 +++
pt-PT/Article_Info.po | 29 +++
pt-PT/Author_Group.po | 19 ++
pt-PT/Installing_Software.po | 311 ++++++++++++++++++++++++
pt-PT/Revision_History.po | 104 ++++++++
pt-PT/antenna-nec2c.po | 36 +++
pt-PT/antenna-splat.po | 290 ++++++++++++++++++++++
pt-PT/antenna-xnec2c.po | 50 ++++
pt-PT/antenna.po | 24 ++
pt-PT/circuit-geda.po | 29 +++
pt-PT/circuit-gerbv.po | 24 ++
pt-PT/circuit-gnucap.po | 24 ++
pt-PT/circuit-gspiceui.po | 29 +++
pt-PT/circuit-iverilog.po | 24 ++
pt-PT/circuit-kicad.po | 24 ++
pt-PT/circuit-ngspice.po | 24 ++
pt-PT/circuit-pcb.po | 24 ++
pt-PT/circuit-qucs.po | 24 ++
pt-PT/circuit-xcircuit.po | 24 ++
pt-PT/circuit.po | 24 ++
pt-PT/logging-LinLog.po | 36 +++
pt-PT/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
pt-PT/logging-xlog.po | 79 ++++++
pt-PT/logging.po | 24 ++
pt-PT/others-aldo.po | 24 ++
pt-PT/others-cwdaemon.po | 24 ++
pt-PT/others-cwirc.po | 61 +++++
pt-PT/others-demorse.po | 24 ++
pt-PT/others-dxcc.po | 24 ++
pt-PT/others-echolinux.po | 24 ++
pt-PT/others-gpredict.po | 24 ++
pt-PT/others-gpsman.po | 24 ++
pt-PT/others-gresistor.po | 24 ++
pt-PT/others-gridloc.po | 24 ++
pt-PT/others-gtkwave.po | 24 ++
pt-PT/others-ibp.po | 136 +++++++++++
pt-PT/others-morse2txt.po | 24 ++
pt-PT/others-ssbd.po | 24 ++
pt-PT/others-svxlink.po | 24 ++
pt-PT/others-thebridge.po | 24 ++
pt-PT/others-tqsllib.po | 24 ++
pt-PT/others-trustedqsl.po | 24 ++
pt-PT/others-unixcw.po | 24 ++
pt-PT/others-wxapt.po | 24 ++
pt-PT/others-xgridloc.po | 99 ++++++++
pt-PT/others-xwota.po | 24 ++
pt-PT/others-xwxapt.po | 24 ++
pt-PT/others.po | 24 ++
pt-PT/packet-aprsd.po | 24 ++
pt-PT/packet-ax25-apps.po | 24 ++
pt-PT/packet-ax25-tools.po | 24 ++
pt-PT/packet-colordx.po | 45 ++++
pt-PT/packet-libax25.po | 24 ++
pt-PT/packet-node.po | 24 ++
pt-PT/packet-xastir.po | 24 ++
pt-PT/packet-xconvers.po | 24 ++
pt-PT/packet-xdx.po | 24 ++
pt-PT/packet.po | 24 ++
pt-PT/rig-grig.po | 39 +++
pt-PT/rig-hamlib.po | 37 +++
pt-PT/rig.po | 24 ++
pt-PT/sdr-gnuradio.po | 36 +++
pt-PT/sdr.po | 24 ++
pt-PT/soundcard-fldigi.po | 29 +++
pt-PT/soundcard-gmfsk.po | 34 +++
pt-PT/soundcard-gpsk31.po | 31 +++
pt-PT/soundcard-linpsk.po | 43 ++++
pt-PT/soundcard-lpsk31.po | 37 +++
pt-PT/soundcard-qsstv.po | 33 +++
pt-PT/soundcard-xfhell.po | 32 +++
pt-PT/soundcard-xpsk31.po | 35 +++
pt-PT/soundcard.po | 24 ++
ru-RU/Amateur_Radio_Guide.po | 34 +++
ru-RU/Article_Info.po | 29 +++
ru-RU/Author_Group.po | 19 ++
ru-RU/Installing_Software.po | 311 ++++++++++++++++++++++++
ru-RU/Revision_History.po | 104 ++++++++
ru-RU/antenna-nec2c.po | 36 +++
ru-RU/antenna-splat.po | 290 ++++++++++++++++++++++
ru-RU/antenna-xnec2c.po | 50 ++++
ru-RU/antenna.po | 24 ++
ru-RU/circuit-geda.po | 29 +++
ru-RU/circuit-gerbv.po | 24 ++
ru-RU/circuit-gnucap.po | 24 ++
ru-RU/circuit-gspiceui.po | 29 +++
ru-RU/circuit-iverilog.po | 24 ++
ru-RU/circuit-kicad.po | 24 ++
ru-RU/circuit-ngspice.po | 24 ++
ru-RU/circuit-pcb.po | 24 ++
ru-RU/circuit-qucs.po | 24 ++
ru-RU/circuit-xcircuit.po | 24 ++
ru-RU/circuit.po | 24 ++
ru-RU/logging-LinLog.po | 36 +++
ru-RU/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
ru-RU/logging-xlog.po | 79 ++++++
ru-RU/logging.po | 24 ++
ru-RU/others-aldo.po | 24 ++
ru-RU/others-cwdaemon.po | 24 ++
ru-RU/others-cwirc.po | 61 +++++
ru-RU/others-demorse.po | 24 ++
ru-RU/others-dxcc.po | 24 ++
ru-RU/others-echolinux.po | 24 ++
ru-RU/others-gpredict.po | 24 ++
ru-RU/others-gpsman.po | 24 ++
ru-RU/others-gresistor.po | 24 ++
ru-RU/others-gridloc.po | 24 ++
ru-RU/others-gtkwave.po | 24 ++
ru-RU/others-ibp.po | 136 +++++++++++
ru-RU/others-morse2txt.po | 24 ++
ru-RU/others-ssbd.po | 24 ++
ru-RU/others-svxlink.po | 24 ++
ru-RU/others-thebridge.po | 24 ++
ru-RU/others-tqsllib.po | 24 ++
ru-RU/others-trustedqsl.po | 24 ++
ru-RU/others-unixcw.po | 24 ++
ru-RU/others-wxapt.po | 24 ++
ru-RU/others-xgridloc.po | 99 ++++++++
ru-RU/others-xwota.po | 24 ++
ru-RU/others-xwxapt.po | 24 ++
ru-RU/others.po | 24 ++
ru-RU/packet-aprsd.po | 24 ++
ru-RU/packet-ax25-apps.po | 24 ++
ru-RU/packet-ax25-tools.po | 24 ++
ru-RU/packet-colordx.po | 45 ++++
ru-RU/packet-libax25.po | 24 ++
ru-RU/packet-node.po | 24 ++
ru-RU/packet-xastir.po | 24 ++
ru-RU/packet-xconvers.po | 24 ++
ru-RU/packet-xdx.po | 24 ++
ru-RU/packet.po | 24 ++
ru-RU/rig-grig.po | 39 +++
ru-RU/rig-hamlib.po | 37 +++
ru-RU/rig.po | 24 ++
ru-RU/sdr-gnuradio.po | 36 +++
ru-RU/sdr.po | 24 ++
ru-RU/soundcard-fldigi.po | 29 +++
ru-RU/soundcard-gmfsk.po | 34 +++
ru-RU/soundcard-gpsk31.po | 31 +++
ru-RU/soundcard-linpsk.po | 43 ++++
ru-RU/soundcard-lpsk31.po | 37 +++
ru-RU/soundcard-qsstv.po | 33 +++
ru-RU/soundcard-xfhell.po | 32 +++
ru-RU/soundcard-xpsk31.po | 35 +++
ru-RU/soundcard.po | 24 ++
sr-Latn-RS/Amateur_Radio_Guide.po | 34 +++
sr-Latn-RS/Article_Info.po | 29 +++
sr-Latn-RS/Author_Group.po | 19 ++
sr-Latn-RS/Installing_Software.po | 311 ++++++++++++++++++++++++
sr-Latn-RS/Revision_History.po | 104 ++++++++
sr-Latn-RS/antenna-nec2c.po | 36 +++
sr-Latn-RS/antenna-splat.po | 290 ++++++++++++++++++++++
sr-Latn-RS/antenna-xnec2c.po | 50 ++++
sr-Latn-RS/antenna.po | 24 ++
sr-Latn-RS/circuit-geda.po | 29 +++
sr-Latn-RS/circuit-gerbv.po | 24 ++
sr-Latn-RS/circuit-gnucap.po | 24 ++
sr-Latn-RS/circuit-gspiceui.po | 29 +++
sr-Latn-RS/circuit-iverilog.po | 24 ++
sr-Latn-RS/circuit-kicad.po | 24 ++
sr-Latn-RS/circuit-ngspice.po | 24 ++
sr-Latn-RS/circuit-pcb.po | 24 ++
sr-Latn-RS/circuit-qucs.po | 24 ++
sr-Latn-RS/circuit-xcircuit.po | 24 ++
sr-Latn-RS/circuit.po | 24 ++
sr-Latn-RS/logging-LinLog.po | 36 +++
sr-Latn-RS/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
sr-Latn-RS/logging-xlog.po | 79 ++++++
sr-Latn-RS/logging.po | 24 ++
sr-Latn-RS/others-aldo.po | 24 ++
sr-Latn-RS/others-cwdaemon.po | 24 ++
sr-Latn-RS/others-cwirc.po | 61 +++++
sr-Latn-RS/others-demorse.po | 24 ++
sr-Latn-RS/others-dxcc.po | 24 ++
sr-Latn-RS/others-echolinux.po | 24 ++
sr-Latn-RS/others-gpredict.po | 24 ++
sr-Latn-RS/others-gpsman.po | 24 ++
sr-Latn-RS/others-gresistor.po | 24 ++
sr-Latn-RS/others-gridloc.po | 24 ++
sr-Latn-RS/others-gtkwave.po | 24 ++
sr-Latn-RS/others-ibp.po | 136 +++++++++++
sr-Latn-RS/others-morse2txt.po | 24 ++
sr-Latn-RS/others-ssbd.po | 24 ++
sr-Latn-RS/others-svxlink.po | 24 ++
sr-Latn-RS/others-thebridge.po | 24 ++
sr-Latn-RS/others-tqsllib.po | 24 ++
sr-Latn-RS/others-trustedqsl.po | 24 ++
sr-Latn-RS/others-unixcw.po | 24 ++
sr-Latn-RS/others-wxapt.po | 24 ++
sr-Latn-RS/others-xgridloc.po | 99 ++++++++
sr-Latn-RS/others-xwota.po | 24 ++
sr-Latn-RS/others-xwxapt.po | 24 ++
sr-Latn-RS/others.po | 24 ++
sr-Latn-RS/packet-aprsd.po | 24 ++
sr-Latn-RS/packet-ax25-apps.po | 24 ++
sr-Latn-RS/packet-ax25-tools.po | 24 ++
sr-Latn-RS/packet-colordx.po | 45 ++++
sr-Latn-RS/packet-libax25.po | 24 ++
sr-Latn-RS/packet-node.po | 24 ++
sr-Latn-RS/packet-xastir.po | 24 ++
sr-Latn-RS/packet-xconvers.po | 24 ++
sr-Latn-RS/packet-xdx.po | 24 ++
sr-Latn-RS/packet.po | 24 ++
sr-Latn-RS/rig-grig.po | 39 +++
sr-Latn-RS/rig-hamlib.po | 37 +++
sr-Latn-RS/rig.po | 24 ++
sr-Latn-RS/sdr-gnuradio.po | 36 +++
sr-Latn-RS/sdr.po | 24 ++
sr-Latn-RS/soundcard-fldigi.po | 29 +++
sr-Latn-RS/soundcard-gmfsk.po | 34 +++
sr-Latn-RS/soundcard-gpsk31.po | 31 +++
sr-Latn-RS/soundcard-linpsk.po | 43 ++++
sr-Latn-RS/soundcard-lpsk31.po | 37 +++
sr-Latn-RS/soundcard-qsstv.po | 33 +++
sr-Latn-RS/soundcard-xfhell.po | 32 +++
sr-Latn-RS/soundcard-xpsk31.po | 35 +++
sr-Latn-RS/soundcard.po | 24 ++
sr-RS/Amateur_Radio_Guide.po | 34 +++
sr-RS/Article_Info.po | 29 +++
sr-RS/Author_Group.po | 19 ++
sr-RS/Installing_Software.po | 311 ++++++++++++++++++++++++
sr-RS/Revision_History.po | 104 ++++++++
sr-RS/antenna-nec2c.po | 36 +++
sr-RS/antenna-splat.po | 290 ++++++++++++++++++++++
sr-RS/antenna-xnec2c.po | 50 ++++
sr-RS/antenna.po | 24 ++
sr-RS/circuit-geda.po | 29 +++
sr-RS/circuit-gerbv.po | 24 ++
sr-RS/circuit-gnucap.po | 24 ++
sr-RS/circuit-gspiceui.po | 29 +++
sr-RS/circuit-iverilog.po | 24 ++
sr-RS/circuit-kicad.po | 24 ++
sr-RS/circuit-ngspice.po | 24 ++
sr-RS/circuit-pcb.po | 24 ++
sr-RS/circuit-qucs.po | 24 ++
sr-RS/circuit-xcircuit.po | 24 ++
sr-RS/circuit.po | 24 ++
sr-RS/logging-LinLog.po | 36 +++
sr-RS/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
sr-RS/logging-xlog.po | 79 ++++++
sr-RS/logging.po | 24 ++
sr-RS/others-aldo.po | 24 ++
sr-RS/others-cwdaemon.po | 24 ++
sr-RS/others-cwirc.po | 61 +++++
sr-RS/others-demorse.po | 24 ++
sr-RS/others-dxcc.po | 24 ++
sr-RS/others-echolinux.po | 24 ++
sr-RS/others-gpredict.po | 24 ++
sr-RS/others-gpsman.po | 24 ++
sr-RS/others-gresistor.po | 24 ++
sr-RS/others-gridloc.po | 24 ++
sr-RS/others-gtkwave.po | 24 ++
sr-RS/others-ibp.po | 136 +++++++++++
sr-RS/others-morse2txt.po | 24 ++
sr-RS/others-ssbd.po | 24 ++
sr-RS/others-svxlink.po | 24 ++
sr-RS/others-thebridge.po | 24 ++
sr-RS/others-tqsllib.po | 24 ++
sr-RS/others-trustedqsl.po | 24 ++
sr-RS/others-unixcw.po | 24 ++
sr-RS/others-wxapt.po | 24 ++
sr-RS/others-xgridloc.po | 99 ++++++++
sr-RS/others-xwota.po | 24 ++
sr-RS/others-xwxapt.po | 24 ++
sr-RS/others.po | 24 ++
sr-RS/packet-aprsd.po | 24 ++
sr-RS/packet-ax25-apps.po | 24 ++
sr-RS/packet-ax25-tools.po | 24 ++
sr-RS/packet-colordx.po | 45 ++++
sr-RS/packet-libax25.po | 24 ++
sr-RS/packet-node.po | 24 ++
sr-RS/packet-xastir.po | 24 ++
sr-RS/packet-xconvers.po | 24 ++
sr-RS/packet-xdx.po | 24 ++
sr-RS/packet.po | 24 ++
sr-RS/rig-grig.po | 39 +++
sr-RS/rig-hamlib.po | 37 +++
sr-RS/rig.po | 24 ++
sr-RS/sdr-gnuradio.po | 36 +++
sr-RS/sdr.po | 24 ++
sr-RS/soundcard-fldigi.po | 29 +++
sr-RS/soundcard-gmfsk.po | 34 +++
sr-RS/soundcard-gpsk31.po | 31 +++
sr-RS/soundcard-linpsk.po | 43 ++++
sr-RS/soundcard-lpsk31.po | 37 +++
sr-RS/soundcard-qsstv.po | 33 +++
sr-RS/soundcard-xfhell.po | 32 +++
sr-RS/soundcard-xpsk31.po | 35 +++
sr-RS/soundcard.po | 24 ++
sv-SE/Amateur_Radio_Guide.po | 34 +++
sv-SE/Article_Info.po | 29 +++
sv-SE/Author_Group.po | 19 ++
sv-SE/Installing_Software.po | 311 ++++++++++++++++++++++++
sv-SE/Revision_History.po | 104 ++++++++
sv-SE/antenna-nec2c.po | 36 +++
sv-SE/antenna-splat.po | 290 ++++++++++++++++++++++
sv-SE/antenna-xnec2c.po | 50 ++++
sv-SE/antenna.po | 24 ++
sv-SE/circuit-geda.po | 29 +++
sv-SE/circuit-gerbv.po | 24 ++
sv-SE/circuit-gnucap.po | 24 ++
sv-SE/circuit-gspiceui.po | 29 +++
sv-SE/circuit-iverilog.po | 24 ++
sv-SE/circuit-kicad.po | 24 ++
sv-SE/circuit-ngspice.po | 24 ++
sv-SE/circuit-pcb.po | 24 ++
sv-SE/circuit-qucs.po | 24 ++
sv-SE/circuit-xcircuit.po | 24 ++
sv-SE/circuit.po | 24 ++
sv-SE/logging-LinLog.po | 36 +++
sv-SE/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
sv-SE/logging-xlog.po | 79 ++++++
sv-SE/logging.po | 24 ++
sv-SE/others-aldo.po | 24 ++
sv-SE/others-cwdaemon.po | 24 ++
sv-SE/others-cwirc.po | 61 +++++
sv-SE/others-demorse.po | 24 ++
sv-SE/others-dxcc.po | 24 ++
sv-SE/others-echolinux.po | 24 ++
sv-SE/others-gpredict.po | 24 ++
sv-SE/others-gpsman.po | 24 ++
sv-SE/others-gresistor.po | 24 ++
sv-SE/others-gridloc.po | 24 ++
sv-SE/others-gtkwave.po | 24 ++
sv-SE/others-ibp.po | 136 +++++++++++
sv-SE/others-morse2txt.po | 24 ++
sv-SE/others-ssbd.po | 24 ++
sv-SE/others-svxlink.po | 24 ++
sv-SE/others-thebridge.po | 24 ++
sv-SE/others-tqsllib.po | 24 ++
sv-SE/others-trustedqsl.po | 24 ++
sv-SE/others-unixcw.po | 24 ++
sv-SE/others-wxapt.po | 24 ++
sv-SE/others-xgridloc.po | 99 ++++++++
sv-SE/others-xwota.po | 24 ++
sv-SE/others-xwxapt.po | 24 ++
sv-SE/others.po | 24 ++
sv-SE/packet-aprsd.po | 24 ++
sv-SE/packet-ax25-apps.po | 24 ++
sv-SE/packet-ax25-tools.po | 24 ++
sv-SE/packet-colordx.po | 45 ++++
sv-SE/packet-libax25.po | 24 ++
sv-SE/packet-node.po | 24 ++
sv-SE/packet-xastir.po | 24 ++
sv-SE/packet-xconvers.po | 24 ++
sv-SE/packet-xdx.po | 24 ++
sv-SE/packet.po | 24 ++
sv-SE/rig-grig.po | 39 +++
sv-SE/rig-hamlib.po | 37 +++
sv-SE/rig.po | 24 ++
sv-SE/sdr-gnuradio.po | 36 +++
sv-SE/sdr.po | 24 ++
sv-SE/soundcard-fldigi.po | 29 +++
sv-SE/soundcard-gmfsk.po | 34 +++
sv-SE/soundcard-gpsk31.po | 31 +++
sv-SE/soundcard-linpsk.po | 43 ++++
sv-SE/soundcard-lpsk31.po | 37 +++
sv-SE/soundcard-qsstv.po | 33 +++
sv-SE/soundcard-xfhell.po | 32 +++
sv-SE/soundcard-xpsk31.po | 35 +++
sv-SE/soundcard.po | 24 ++
uk-UA/Amateur_Radio_Guide.po | 34 +++
uk-UA/Article_Info.po | 29 +++
uk-UA/Author_Group.po | 19 ++
uk-UA/Installing_Software.po | 311 ++++++++++++++++++++++++
uk-UA/Revision_History.po | 104 ++++++++
uk-UA/antenna-nec2c.po | 36 +++
uk-UA/antenna-splat.po | 290 ++++++++++++++++++++++
uk-UA/antenna-xnec2c.po | 50 ++++
uk-UA/antenna.po | 24 ++
uk-UA/circuit-geda.po | 29 +++
uk-UA/circuit-gerbv.po | 24 ++
uk-UA/circuit-gnucap.po | 24 ++
uk-UA/circuit-gspiceui.po | 29 +++
uk-UA/circuit-iverilog.po | 24 ++
uk-UA/circuit-kicad.po | 24 ++
uk-UA/circuit-ngspice.po | 24 ++
uk-UA/circuit-pcb.po | 24 ++
uk-UA/circuit-qucs.po | 24 ++
uk-UA/circuit-xcircuit.po | 24 ++
uk-UA/circuit.po | 24 ++
uk-UA/logging-LinLog.po | 36 +++
uk-UA/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
uk-UA/logging-xlog.po | 79 ++++++
uk-UA/logging.po | 24 ++
uk-UA/others-aldo.po | 24 ++
uk-UA/others-cwdaemon.po | 24 ++
uk-UA/others-cwirc.po | 61 +++++
uk-UA/others-demorse.po | 24 ++
uk-UA/others-dxcc.po | 24 ++
uk-UA/others-echolinux.po | 24 ++
uk-UA/others-gpredict.po | 24 ++
uk-UA/others-gpsman.po | 24 ++
uk-UA/others-gresistor.po | 24 ++
uk-UA/others-gridloc.po | 24 ++
uk-UA/others-gtkwave.po | 24 ++
uk-UA/others-ibp.po | 136 +++++++++++
uk-UA/others-morse2txt.po | 24 ++
uk-UA/others-ssbd.po | 24 ++
uk-UA/others-svxlink.po | 24 ++
uk-UA/others-thebridge.po | 24 ++
uk-UA/others-tqsllib.po | 24 ++
uk-UA/others-trustedqsl.po | 24 ++
uk-UA/others-unixcw.po | 24 ++
uk-UA/others-wxapt.po | 24 ++
uk-UA/others-xgridloc.po | 99 ++++++++
uk-UA/others-xwota.po | 24 ++
uk-UA/others-xwxapt.po | 24 ++
uk-UA/others.po | 24 ++
uk-UA/packet-aprsd.po | 24 ++
uk-UA/packet-ax25-apps.po | 24 ++
uk-UA/packet-ax25-tools.po | 24 ++
uk-UA/packet-colordx.po | 45 ++++
uk-UA/packet-libax25.po | 24 ++
uk-UA/packet-node.po | 24 ++
uk-UA/packet-xastir.po | 24 ++
uk-UA/packet-xconvers.po | 24 ++
uk-UA/packet-xdx.po | 24 ++
uk-UA/packet.po | 24 ++
uk-UA/rig-grig.po | 39 +++
uk-UA/rig-hamlib.po | 37 +++
uk-UA/rig.po | 24 ++
uk-UA/sdr-gnuradio.po | 36 +++
uk-UA/sdr.po | 24 ++
uk-UA/soundcard-fldigi.po | 29 +++
uk-UA/soundcard-gmfsk.po | 34 +++
uk-UA/soundcard-gpsk31.po | 31 +++
uk-UA/soundcard-linpsk.po | 43 ++++
uk-UA/soundcard-lpsk31.po | 37 +++
uk-UA/soundcard-qsstv.po | 33 +++
uk-UA/soundcard-xfhell.po | 32 +++
uk-UA/soundcard-xpsk31.po | 35 +++
uk-UA/soundcard.po | 24 ++
zh-CN/Amateur_Radio_Guide.po | 34 +++
zh-CN/Article_Info.po | 29 +++
zh-CN/Author_Group.po | 19 ++
zh-CN/Installing_Software.po | 311 ++++++++++++++++++++++++
zh-CN/Revision_History.po | 104 ++++++++
zh-CN/antenna-nec2c.po | 36 +++
zh-CN/antenna-splat.po | 290 ++++++++++++++++++++++
zh-CN/antenna-xnec2c.po | 50 ++++
zh-CN/antenna.po | 24 ++
zh-CN/circuit-geda.po | 29 +++
zh-CN/circuit-gerbv.po | 24 ++
zh-CN/circuit-gnucap.po | 24 ++
zh-CN/circuit-gspiceui.po | 29 +++
zh-CN/circuit-iverilog.po | 24 ++
zh-CN/circuit-kicad.po | 24 ++
zh-CN/circuit-ngspice.po | 24 ++
zh-CN/circuit-pcb.po | 24 ++
zh-CN/circuit-qucs.po | 24 ++
zh-CN/circuit-xcircuit.po | 24 ++
zh-CN/circuit.po | 24 ++
zh-CN/logging-LinLog.po | 36 +++
zh-CN/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
zh-CN/logging-xlog.po | 79 ++++++
zh-CN/logging.po | 24 ++
zh-CN/others-aldo.po | 24 ++
zh-CN/others-cwdaemon.po | 24 ++
zh-CN/others-cwirc.po | 61 +++++
zh-CN/others-demorse.po | 24 ++
zh-CN/others-dxcc.po | 24 ++
zh-CN/others-echolinux.po | 24 ++
zh-CN/others-gpredict.po | 24 ++
zh-CN/others-gpsman.po | 24 ++
zh-CN/others-gresistor.po | 24 ++
zh-CN/others-gridloc.po | 24 ++
zh-CN/others-gtkwave.po | 24 ++
zh-CN/others-ibp.po | 136 +++++++++++
zh-CN/others-morse2txt.po | 24 ++
zh-CN/others-ssbd.po | 24 ++
zh-CN/others-svxlink.po | 24 ++
zh-CN/others-thebridge.po | 24 ++
zh-CN/others-tqsllib.po | 24 ++
zh-CN/others-trustedqsl.po | 24 ++
zh-CN/others-unixcw.po | 24 ++
zh-CN/others-wxapt.po | 24 ++
zh-CN/others-xgridloc.po | 99 ++++++++
zh-CN/others-xwota.po | 24 ++
zh-CN/others-xwxapt.po | 24 ++
zh-CN/others.po | 24 ++
zh-CN/packet-aprsd.po | 24 ++
zh-CN/packet-ax25-apps.po | 24 ++
zh-CN/packet-ax25-tools.po | 24 ++
zh-CN/packet-colordx.po | 45 ++++
zh-CN/packet-libax25.po | 24 ++
zh-CN/packet-node.po | 24 ++
zh-CN/packet-xastir.po | 24 ++
zh-CN/packet-xconvers.po | 24 ++
zh-CN/packet-xdx.po | 24 ++
zh-CN/packet.po | 24 ++
zh-CN/rig-grig.po | 39 +++
zh-CN/rig-hamlib.po | 37 +++
zh-CN/rig.po | 24 ++
zh-CN/sdr-gnuradio.po | 36 +++
zh-CN/sdr.po | 24 ++
zh-CN/soundcard-fldigi.po | 29 +++
zh-CN/soundcard-gmfsk.po | 34 +++
zh-CN/soundcard-gpsk31.po | 31 +++
zh-CN/soundcard-linpsk.po | 43 ++++
zh-CN/soundcard-lpsk31.po | 37 +++
zh-CN/soundcard-qsstv.po | 33 +++
zh-CN/soundcard-xfhell.po | 32 +++
zh-CN/soundcard-xpsk31.po | 35 +++
zh-CN/soundcard.po | 24 ++
zh-TW/Amateur_Radio_Guide.po | 34 +++
zh-TW/Article_Info.po | 29 +++
zh-TW/Author_Group.po | 19 ++
zh-TW/Installing_Software.po | 311 ++++++++++++++++++++++++
zh-TW/Revision_History.po | 104 ++++++++
zh-TW/antenna-nec2c.po | 36 +++
zh-TW/antenna-splat.po | 290 ++++++++++++++++++++++
zh-TW/antenna-xnec2c.po | 50 ++++
zh-TW/antenna.po | 24 ++
zh-TW/circuit-geda.po | 29 +++
zh-TW/circuit-gerbv.po | 24 ++
zh-TW/circuit-gnucap.po | 24 ++
zh-TW/circuit-gspiceui.po | 29 +++
zh-TW/circuit-iverilog.po | 24 ++
zh-TW/circuit-kicad.po | 24 ++
zh-TW/circuit-ngspice.po | 24 ++
zh-TW/circuit-pcb.po | 24 ++
zh-TW/circuit-qucs.po | 24 ++
zh-TW/circuit-xcircuit.po | 24 ++
zh-TW/circuit.po | 24 ++
zh-TW/logging-LinLog.po | 36 +++
zh-TW/logging-qle.po | 479 +++++++++++++++++++++++++++++++++++++
zh-TW/logging-xlog.po | 79 ++++++
zh-TW/logging.po | 24 ++
zh-TW/others-aldo.po | 24 ++
zh-TW/others-cwdaemon.po | 24 ++
zh-TW/others-cwirc.po | 61 +++++
zh-TW/others-demorse.po | 24 ++
zh-TW/others-dxcc.po | 24 ++
zh-TW/others-echolinux.po | 24 ++
zh-TW/others-gpredict.po | 24 ++
zh-TW/others-gpsman.po | 24 ++
zh-TW/others-gresistor.po | 24 ++
zh-TW/others-gridloc.po | 24 ++
zh-TW/others-gtkwave.po | 24 ++
zh-TW/others-ibp.po | 136 +++++++++++
zh-TW/others-morse2txt.po | 24 ++
zh-TW/others-ssbd.po | 24 ++
zh-TW/others-svxlink.po | 24 ++
zh-TW/others-thebridge.po | 24 ++
zh-TW/others-tqsllib.po | 24 ++
zh-TW/others-trustedqsl.po | 24 ++
zh-TW/others-unixcw.po | 24 ++
zh-TW/others-wxapt.po | 24 ++
zh-TW/others-xgridloc.po | 99 ++++++++
zh-TW/others-xwota.po | 24 ++
zh-TW/others-xwxapt.po | 24 ++
zh-TW/others.po | 24 ++
zh-TW/packet-aprsd.po | 24 ++
zh-TW/packet-ax25-apps.po | 24 ++
zh-TW/packet-ax25-tools.po | 24 ++
zh-TW/packet-colordx.po | 45 ++++
zh-TW/packet-libax25.po | 24 ++
zh-TW/packet-node.po | 24 ++
zh-TW/packet-xastir.po | 24 ++
zh-TW/packet-xconvers.po | 24 ++
zh-TW/packet-xdx.po | 24 ++
zh-TW/packet.po | 24 ++
zh-TW/rig-grig.po | 39 +++
zh-TW/rig-hamlib.po | 37 +++
zh-TW/rig.po | 24 ++
zh-TW/sdr-gnuradio.po | 36 +++
zh-TW/sdr.po | 24 ++
zh-TW/soundcard-fldigi.po | 29 +++
zh-TW/soundcard-gmfsk.po | 34 +++
zh-TW/soundcard-gpsk31.po | 31 +++
zh-TW/soundcard-linpsk.po | 43 ++++
zh-TW/soundcard-lpsk31.po | 37 +++
zh-TW/soundcard-qsstv.po | 33 +++
zh-TW/soundcard-xfhell.po | 32 +++
zh-TW/soundcard-xpsk31.po | 35 +++
zh-TW/soundcard.po | 24 ++
1512 files changed, 69468 insertions(+), 0 deletions(-)
---
diff --git a/cs-CZ/Amateur_Radio_Guide.po b/cs-CZ/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/cs-CZ/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/cs-CZ/Article_Info.po b/cs-CZ/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/cs-CZ/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/cs-CZ/Author_Group.po b/cs-CZ/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/cs-CZ/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/cs-CZ/Installing_Software.po b/cs-CZ/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/cs-CZ/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/cs-CZ/Revision_History.po b/cs-CZ/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/cs-CZ/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/cs-CZ/antenna-nec2c.po b/cs-CZ/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/cs-CZ/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/antenna-splat.po b/cs-CZ/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/cs-CZ/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/cs-CZ/antenna-xnec2c.po b/cs-CZ/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/cs-CZ/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/cs-CZ/antenna.po b/cs-CZ/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/cs-CZ/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-geda.po b/cs-CZ/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/cs-CZ/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/cs-CZ/circuit-gerbv.po b/cs-CZ/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/cs-CZ/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/cs-CZ/circuit-gnucap.po b/cs-CZ/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/cs-CZ/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-gspiceui.po b/cs-CZ/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/cs-CZ/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/cs-CZ/circuit-iverilog.po b/cs-CZ/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/cs-CZ/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-kicad.po b/cs-CZ/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/cs-CZ/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-ngspice.po b/cs-CZ/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/cs-CZ/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-pcb.po b/cs-CZ/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/cs-CZ/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/cs-CZ/circuit-qucs.po b/cs-CZ/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/cs-CZ/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit-xcircuit.po b/cs-CZ/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/cs-CZ/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/circuit.po b/cs-CZ/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/cs-CZ/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/logging-LinLog.po b/cs-CZ/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/cs-CZ/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/logging-qle.po b/cs-CZ/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/cs-CZ/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/cs-CZ/logging-xlog.po b/cs-CZ/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/cs-CZ/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/cs-CZ/logging.po b/cs-CZ/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/cs-CZ/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-aldo.po b/cs-CZ/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/cs-CZ/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-cwdaemon.po b/cs-CZ/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/cs-CZ/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-cwirc.po b/cs-CZ/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/cs-CZ/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/cs-CZ/others-demorse.po b/cs-CZ/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/cs-CZ/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-dxcc.po b/cs-CZ/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/cs-CZ/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/cs-CZ/others-echolinux.po b/cs-CZ/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/cs-CZ/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-gpredict.po b/cs-CZ/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/cs-CZ/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/cs-CZ/others-gpsman.po b/cs-CZ/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/cs-CZ/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-gresistor.po b/cs-CZ/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/cs-CZ/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/cs-CZ/others-gridloc.po b/cs-CZ/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/cs-CZ/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-gtkwave.po b/cs-CZ/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/cs-CZ/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-ibp.po b/cs-CZ/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/cs-CZ/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/cs-CZ/others-morse2txt.po b/cs-CZ/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/cs-CZ/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-ssbd.po b/cs-CZ/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/cs-CZ/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-svxlink.po b/cs-CZ/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/cs-CZ/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-thebridge.po b/cs-CZ/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/cs-CZ/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-tqsllib.po b/cs-CZ/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/cs-CZ/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-trustedqsl.po b/cs-CZ/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/cs-CZ/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-unixcw.po b/cs-CZ/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/cs-CZ/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-wxapt.po b/cs-CZ/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/cs-CZ/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others-xgridloc.po b/cs-CZ/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/cs-CZ/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/cs-CZ/others-xwota.po b/cs-CZ/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/cs-CZ/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/cs-CZ/others-xwxapt.po b/cs-CZ/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/cs-CZ/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/others.po b/cs-CZ/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/cs-CZ/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-aprsd.po b/cs-CZ/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/cs-CZ/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-ax25-apps.po b/cs-CZ/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/cs-CZ/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-ax25-tools.po b/cs-CZ/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/cs-CZ/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-colordx.po b/cs-CZ/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/cs-CZ/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/cs-CZ/packet-libax25.po b/cs-CZ/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/cs-CZ/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-node.po b/cs-CZ/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/cs-CZ/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/packet-xastir.po b/cs-CZ/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/cs-CZ/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/cs-CZ/packet-xconvers.po b/cs-CZ/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/cs-CZ/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/cs-CZ/packet-xdx.po b/cs-CZ/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/cs-CZ/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/cs-CZ/packet.po b/cs-CZ/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/cs-CZ/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/rig-grig.po b/cs-CZ/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/cs-CZ/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/cs-CZ/rig-hamlib.po b/cs-CZ/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/cs-CZ/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/rig.po b/cs-CZ/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/cs-CZ/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/cs-CZ/sdr-gnuradio.po b/cs-CZ/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/cs-CZ/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/sdr.po b/cs-CZ/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/cs-CZ/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/cs-CZ/soundcard-fldigi.po b/cs-CZ/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/cs-CZ/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/cs-CZ/soundcard-gmfsk.po b/cs-CZ/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/cs-CZ/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-gpsk31.po b/cs-CZ/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/cs-CZ/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-linpsk.po b/cs-CZ/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/cs-CZ/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-lpsk31.po b/cs-CZ/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/cs-CZ/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-qsstv.po b/cs-CZ/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/cs-CZ/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-xfhell.po b/cs-CZ/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/cs-CZ/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard-xpsk31.po b/cs-CZ/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/cs-CZ/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/cs-CZ/soundcard.po b/cs-CZ/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/cs-CZ/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/de-DE/Amateur_Radio_Guide.po b/de-DE/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/de-DE/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/de-DE/Article_Info.po b/de-DE/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/de-DE/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/de-DE/Author_Group.po b/de-DE/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/de-DE/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/de-DE/Installing_Software.po b/de-DE/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/de-DE/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/de-DE/Revision_History.po b/de-DE/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/de-DE/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/de-DE/antenna-nec2c.po b/de-DE/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/de-DE/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/de-DE/antenna-splat.po b/de-DE/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/de-DE/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/de-DE/antenna-xnec2c.po b/de-DE/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/de-DE/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/de-DE/antenna.po b/de-DE/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/de-DE/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-geda.po b/de-DE/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/de-DE/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/de-DE/circuit-gerbv.po b/de-DE/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/de-DE/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/de-DE/circuit-gnucap.po b/de-DE/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/de-DE/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-gspiceui.po b/de-DE/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/de-DE/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/de-DE/circuit-iverilog.po b/de-DE/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/de-DE/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-kicad.po b/de-DE/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/de-DE/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-ngspice.po b/de-DE/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/de-DE/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-pcb.po b/de-DE/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/de-DE/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/de-DE/circuit-qucs.po b/de-DE/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/de-DE/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit-xcircuit.po b/de-DE/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/de-DE/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/circuit.po b/de-DE/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/de-DE/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/logging-LinLog.po b/de-DE/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/de-DE/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/de-DE/logging-qle.po b/de-DE/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/de-DE/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/de-DE/logging-xlog.po b/de-DE/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/de-DE/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/de-DE/logging.po b/de-DE/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/de-DE/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-aldo.po b/de-DE/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/de-DE/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-cwdaemon.po b/de-DE/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/de-DE/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-cwirc.po b/de-DE/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/de-DE/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/de-DE/others-demorse.po b/de-DE/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/de-DE/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-dxcc.po b/de-DE/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/de-DE/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/de-DE/others-echolinux.po b/de-DE/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/de-DE/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-gpredict.po b/de-DE/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/de-DE/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/de-DE/others-gpsman.po b/de-DE/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/de-DE/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-gresistor.po b/de-DE/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/de-DE/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/de-DE/others-gridloc.po b/de-DE/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/de-DE/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-gtkwave.po b/de-DE/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/de-DE/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-ibp.po b/de-DE/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/de-DE/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/de-DE/others-morse2txt.po b/de-DE/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/de-DE/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-ssbd.po b/de-DE/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/de-DE/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-svxlink.po b/de-DE/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/de-DE/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-thebridge.po b/de-DE/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/de-DE/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-tqsllib.po b/de-DE/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/de-DE/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-trustedqsl.po b/de-DE/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/de-DE/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-unixcw.po b/de-DE/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/de-DE/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-wxapt.po b/de-DE/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/de-DE/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others-xgridloc.po b/de-DE/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/de-DE/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/de-DE/others-xwota.po b/de-DE/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/de-DE/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/de-DE/others-xwxapt.po b/de-DE/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/de-DE/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/others.po b/de-DE/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/de-DE/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-aprsd.po b/de-DE/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/de-DE/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-ax25-apps.po b/de-DE/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/de-DE/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-ax25-tools.po b/de-DE/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/de-DE/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-colordx.po b/de-DE/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/de-DE/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/de-DE/packet-libax25.po b/de-DE/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/de-DE/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-node.po b/de-DE/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/de-DE/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/packet-xastir.po b/de-DE/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/de-DE/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/de-DE/packet-xconvers.po b/de-DE/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/de-DE/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/de-DE/packet-xdx.po b/de-DE/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/de-DE/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/de-DE/packet.po b/de-DE/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/de-DE/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/rig-grig.po b/de-DE/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/de-DE/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/de-DE/rig-hamlib.po b/de-DE/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/de-DE/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/de-DE/rig.po b/de-DE/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/de-DE/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/de-DE/sdr-gnuradio.po b/de-DE/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/de-DE/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/de-DE/sdr.po b/de-DE/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/de-DE/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/de-DE/soundcard-fldigi.po b/de-DE/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/de-DE/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/de-DE/soundcard-gmfsk.po b/de-DE/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/de-DE/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-gpsk31.po b/de-DE/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/de-DE/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-linpsk.po b/de-DE/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/de-DE/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-lpsk31.po b/de-DE/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/de-DE/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-qsstv.po b/de-DE/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/de-DE/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-xfhell.po b/de-DE/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/de-DE/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard-xpsk31.po b/de-DE/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/de-DE/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/de-DE/soundcard.po b/de-DE/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/de-DE/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/el-GR/Amateur_Radio_Guide.po b/el-GR/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/el-GR/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/el-GR/Article_Info.po b/el-GR/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/el-GR/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/el-GR/Author_Group.po b/el-GR/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/el-GR/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/el-GR/Installing_Software.po b/el-GR/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/el-GR/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/el-GR/Revision_History.po b/el-GR/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/el-GR/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/el-GR/antenna-nec2c.po b/el-GR/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/el-GR/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/el-GR/antenna-splat.po b/el-GR/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/el-GR/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/el-GR/antenna-xnec2c.po b/el-GR/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/el-GR/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/el-GR/antenna.po b/el-GR/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/el-GR/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-geda.po b/el-GR/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/el-GR/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/el-GR/circuit-gerbv.po b/el-GR/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/el-GR/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/el-GR/circuit-gnucap.po b/el-GR/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/el-GR/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-gspiceui.po b/el-GR/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/el-GR/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/el-GR/circuit-iverilog.po b/el-GR/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/el-GR/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-kicad.po b/el-GR/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/el-GR/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-ngspice.po b/el-GR/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/el-GR/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-pcb.po b/el-GR/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/el-GR/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/el-GR/circuit-qucs.po b/el-GR/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/el-GR/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit-xcircuit.po b/el-GR/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/el-GR/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/circuit.po b/el-GR/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/el-GR/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/logging-LinLog.po b/el-GR/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/el-GR/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/el-GR/logging-qle.po b/el-GR/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/el-GR/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/el-GR/logging-xlog.po b/el-GR/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/el-GR/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/el-GR/logging.po b/el-GR/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/el-GR/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-aldo.po b/el-GR/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/el-GR/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-cwdaemon.po b/el-GR/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/el-GR/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-cwirc.po b/el-GR/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/el-GR/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/el-GR/others-demorse.po b/el-GR/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/el-GR/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-dxcc.po b/el-GR/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/el-GR/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/el-GR/others-echolinux.po b/el-GR/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/el-GR/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-gpredict.po b/el-GR/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/el-GR/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/el-GR/others-gpsman.po b/el-GR/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/el-GR/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-gresistor.po b/el-GR/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/el-GR/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/el-GR/others-gridloc.po b/el-GR/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/el-GR/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-gtkwave.po b/el-GR/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/el-GR/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-ibp.po b/el-GR/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/el-GR/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/el-GR/others-morse2txt.po b/el-GR/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/el-GR/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-ssbd.po b/el-GR/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/el-GR/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-svxlink.po b/el-GR/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/el-GR/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-thebridge.po b/el-GR/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/el-GR/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-tqsllib.po b/el-GR/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/el-GR/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-trustedqsl.po b/el-GR/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/el-GR/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-unixcw.po b/el-GR/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/el-GR/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-wxapt.po b/el-GR/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/el-GR/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others-xgridloc.po b/el-GR/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/el-GR/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/el-GR/others-xwota.po b/el-GR/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/el-GR/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/el-GR/others-xwxapt.po b/el-GR/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/el-GR/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/others.po b/el-GR/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/el-GR/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-aprsd.po b/el-GR/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/el-GR/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-ax25-apps.po b/el-GR/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/el-GR/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-ax25-tools.po b/el-GR/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/el-GR/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-colordx.po b/el-GR/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/el-GR/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/el-GR/packet-libax25.po b/el-GR/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/el-GR/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-node.po b/el-GR/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/el-GR/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/packet-xastir.po b/el-GR/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/el-GR/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/el-GR/packet-xconvers.po b/el-GR/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/el-GR/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/el-GR/packet-xdx.po b/el-GR/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/el-GR/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/el-GR/packet.po b/el-GR/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/el-GR/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/rig-grig.po b/el-GR/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/el-GR/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/el-GR/rig-hamlib.po b/el-GR/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/el-GR/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/el-GR/rig.po b/el-GR/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/el-GR/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/el-GR/sdr-gnuradio.po b/el-GR/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/el-GR/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/el-GR/sdr.po b/el-GR/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/el-GR/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/el-GR/soundcard-fldigi.po b/el-GR/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/el-GR/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/el-GR/soundcard-gmfsk.po b/el-GR/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/el-GR/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-gpsk31.po b/el-GR/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/el-GR/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-linpsk.po b/el-GR/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/el-GR/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-lpsk31.po b/el-GR/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/el-GR/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-qsstv.po b/el-GR/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/el-GR/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-xfhell.po b/el-GR/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/el-GR/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard-xpsk31.po b/el-GR/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/el-GR/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/el-GR/soundcard.po b/el-GR/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/el-GR/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/es-ES/Amateur_Radio_Guide.po b/es-ES/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/es-ES/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/es-ES/Article_Info.po b/es-ES/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/es-ES/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/es-ES/Author_Group.po b/es-ES/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/es-ES/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/es-ES/Installing_Software.po b/es-ES/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/es-ES/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/es-ES/Revision_History.po b/es-ES/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/es-ES/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/es-ES/antenna-nec2c.po b/es-ES/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/es-ES/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/es-ES/antenna-splat.po b/es-ES/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/es-ES/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/es-ES/antenna-xnec2c.po b/es-ES/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/es-ES/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/es-ES/antenna.po b/es-ES/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/es-ES/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-geda.po b/es-ES/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/es-ES/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/es-ES/circuit-gerbv.po b/es-ES/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/es-ES/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/es-ES/circuit-gnucap.po b/es-ES/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/es-ES/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-gspiceui.po b/es-ES/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/es-ES/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/es-ES/circuit-iverilog.po b/es-ES/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/es-ES/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-kicad.po b/es-ES/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/es-ES/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-ngspice.po b/es-ES/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/es-ES/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-pcb.po b/es-ES/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/es-ES/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/es-ES/circuit-qucs.po b/es-ES/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/es-ES/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit-xcircuit.po b/es-ES/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/es-ES/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/circuit.po b/es-ES/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/es-ES/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/logging-LinLog.po b/es-ES/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/es-ES/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/es-ES/logging-qle.po b/es-ES/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/es-ES/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/es-ES/logging-xlog.po b/es-ES/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/es-ES/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/es-ES/logging.po b/es-ES/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/es-ES/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-aldo.po b/es-ES/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/es-ES/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-cwdaemon.po b/es-ES/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/es-ES/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-cwirc.po b/es-ES/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/es-ES/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/es-ES/others-demorse.po b/es-ES/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/es-ES/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-dxcc.po b/es-ES/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/es-ES/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/es-ES/others-echolinux.po b/es-ES/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/es-ES/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-gpredict.po b/es-ES/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/es-ES/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/es-ES/others-gpsman.po b/es-ES/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/es-ES/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-gresistor.po b/es-ES/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/es-ES/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/es-ES/others-gridloc.po b/es-ES/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/es-ES/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-gtkwave.po b/es-ES/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/es-ES/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-ibp.po b/es-ES/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/es-ES/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/es-ES/others-morse2txt.po b/es-ES/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/es-ES/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-ssbd.po b/es-ES/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/es-ES/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-svxlink.po b/es-ES/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/es-ES/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-thebridge.po b/es-ES/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/es-ES/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-tqsllib.po b/es-ES/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/es-ES/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-trustedqsl.po b/es-ES/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/es-ES/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-unixcw.po b/es-ES/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/es-ES/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-wxapt.po b/es-ES/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/es-ES/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others-xgridloc.po b/es-ES/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/es-ES/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/es-ES/others-xwota.po b/es-ES/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/es-ES/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/es-ES/others-xwxapt.po b/es-ES/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/es-ES/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/others.po b/es-ES/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/es-ES/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-aprsd.po b/es-ES/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/es-ES/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-ax25-apps.po b/es-ES/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/es-ES/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-ax25-tools.po b/es-ES/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/es-ES/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-colordx.po b/es-ES/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/es-ES/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/es-ES/packet-libax25.po b/es-ES/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/es-ES/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-node.po b/es-ES/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/es-ES/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/packet-xastir.po b/es-ES/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/es-ES/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/es-ES/packet-xconvers.po b/es-ES/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/es-ES/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/es-ES/packet-xdx.po b/es-ES/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/es-ES/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/es-ES/packet.po b/es-ES/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/es-ES/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/rig-grig.po b/es-ES/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/es-ES/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/es-ES/rig-hamlib.po b/es-ES/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/es-ES/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/es-ES/rig.po b/es-ES/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/es-ES/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/es-ES/sdr-gnuradio.po b/es-ES/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/es-ES/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/es-ES/sdr.po b/es-ES/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/es-ES/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/es-ES/soundcard-fldigi.po b/es-ES/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/es-ES/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/es-ES/soundcard-gmfsk.po b/es-ES/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/es-ES/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-gpsk31.po b/es-ES/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/es-ES/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-linpsk.po b/es-ES/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/es-ES/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-lpsk31.po b/es-ES/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/es-ES/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-qsstv.po b/es-ES/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/es-ES/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-xfhell.po b/es-ES/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/es-ES/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard-xpsk31.po b/es-ES/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/es-ES/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/es-ES/soundcard.po b/es-ES/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/es-ES/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/fi-FI/Amateur_Radio_Guide.po b/fi-FI/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/fi-FI/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/fi-FI/Article_Info.po b/fi-FI/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/fi-FI/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/fi-FI/Author_Group.po b/fi-FI/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/fi-FI/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/fi-FI/Installing_Software.po b/fi-FI/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/fi-FI/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/fi-FI/Revision_History.po b/fi-FI/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/fi-FI/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/fi-FI/antenna-nec2c.po b/fi-FI/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/fi-FI/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/antenna-splat.po b/fi-FI/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/fi-FI/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/fi-FI/antenna-xnec2c.po b/fi-FI/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/fi-FI/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/fi-FI/antenna.po b/fi-FI/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/fi-FI/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-geda.po b/fi-FI/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/fi-FI/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/fi-FI/circuit-gerbv.po b/fi-FI/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/fi-FI/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/fi-FI/circuit-gnucap.po b/fi-FI/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/fi-FI/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-gspiceui.po b/fi-FI/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/fi-FI/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/fi-FI/circuit-iverilog.po b/fi-FI/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/fi-FI/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-kicad.po b/fi-FI/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/fi-FI/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-ngspice.po b/fi-FI/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/fi-FI/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-pcb.po b/fi-FI/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/fi-FI/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/fi-FI/circuit-qucs.po b/fi-FI/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/fi-FI/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit-xcircuit.po b/fi-FI/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/fi-FI/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/circuit.po b/fi-FI/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/fi-FI/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/logging-LinLog.po b/fi-FI/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/fi-FI/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/logging-qle.po b/fi-FI/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/fi-FI/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/fi-FI/logging-xlog.po b/fi-FI/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/fi-FI/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/fi-FI/logging.po b/fi-FI/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/fi-FI/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-aldo.po b/fi-FI/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/fi-FI/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-cwdaemon.po b/fi-FI/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/fi-FI/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-cwirc.po b/fi-FI/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/fi-FI/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/fi-FI/others-demorse.po b/fi-FI/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/fi-FI/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-dxcc.po b/fi-FI/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/fi-FI/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/fi-FI/others-echolinux.po b/fi-FI/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/fi-FI/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-gpredict.po b/fi-FI/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/fi-FI/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/fi-FI/others-gpsman.po b/fi-FI/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/fi-FI/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-gresistor.po b/fi-FI/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/fi-FI/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/fi-FI/others-gridloc.po b/fi-FI/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/fi-FI/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-gtkwave.po b/fi-FI/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/fi-FI/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-ibp.po b/fi-FI/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/fi-FI/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/fi-FI/others-morse2txt.po b/fi-FI/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/fi-FI/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-ssbd.po b/fi-FI/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/fi-FI/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-svxlink.po b/fi-FI/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/fi-FI/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-thebridge.po b/fi-FI/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/fi-FI/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-tqsllib.po b/fi-FI/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/fi-FI/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-trustedqsl.po b/fi-FI/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/fi-FI/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-unixcw.po b/fi-FI/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/fi-FI/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-wxapt.po b/fi-FI/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/fi-FI/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others-xgridloc.po b/fi-FI/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/fi-FI/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/fi-FI/others-xwota.po b/fi-FI/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/fi-FI/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/fi-FI/others-xwxapt.po b/fi-FI/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/fi-FI/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/others.po b/fi-FI/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/fi-FI/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-aprsd.po b/fi-FI/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/fi-FI/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-ax25-apps.po b/fi-FI/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/fi-FI/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-ax25-tools.po b/fi-FI/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/fi-FI/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-colordx.po b/fi-FI/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/fi-FI/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/fi-FI/packet-libax25.po b/fi-FI/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/fi-FI/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-node.po b/fi-FI/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/fi-FI/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/packet-xastir.po b/fi-FI/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/fi-FI/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/fi-FI/packet-xconvers.po b/fi-FI/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/fi-FI/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/fi-FI/packet-xdx.po b/fi-FI/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/fi-FI/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/fi-FI/packet.po b/fi-FI/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/fi-FI/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/rig-grig.po b/fi-FI/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/fi-FI/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/fi-FI/rig-hamlib.po b/fi-FI/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/fi-FI/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/rig.po b/fi-FI/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/fi-FI/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/fi-FI/sdr-gnuradio.po b/fi-FI/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/fi-FI/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/sdr.po b/fi-FI/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/fi-FI/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fi-FI/soundcard-fldigi.po b/fi-FI/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/fi-FI/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/fi-FI/soundcard-gmfsk.po b/fi-FI/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/fi-FI/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-gpsk31.po b/fi-FI/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/fi-FI/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-linpsk.po b/fi-FI/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/fi-FI/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-lpsk31.po b/fi-FI/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/fi-FI/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-qsstv.po b/fi-FI/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/fi-FI/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-xfhell.po b/fi-FI/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/fi-FI/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard-xpsk31.po b/fi-FI/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/fi-FI/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/fi-FI/soundcard.po b/fi-FI/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/fi-FI/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/fr-FR/Amateur_Radio_Guide.po b/fr-FR/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/fr-FR/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/fr-FR/Article_Info.po b/fr-FR/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/fr-FR/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/fr-FR/Author_Group.po b/fr-FR/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/fr-FR/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/fr-FR/Installing_Software.po b/fr-FR/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/fr-FR/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/fr-FR/Revision_History.po b/fr-FR/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/fr-FR/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/fr-FR/antenna-nec2c.po b/fr-FR/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/fr-FR/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/antenna-splat.po b/fr-FR/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/fr-FR/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/fr-FR/antenna-xnec2c.po b/fr-FR/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/fr-FR/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/fr-FR/antenna.po b/fr-FR/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/fr-FR/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-geda.po b/fr-FR/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/fr-FR/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/fr-FR/circuit-gerbv.po b/fr-FR/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/fr-FR/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/fr-FR/circuit-gnucap.po b/fr-FR/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/fr-FR/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-gspiceui.po b/fr-FR/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/fr-FR/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/fr-FR/circuit-iverilog.po b/fr-FR/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/fr-FR/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-kicad.po b/fr-FR/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/fr-FR/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-ngspice.po b/fr-FR/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/fr-FR/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-pcb.po b/fr-FR/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/fr-FR/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/fr-FR/circuit-qucs.po b/fr-FR/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/fr-FR/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit-xcircuit.po b/fr-FR/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/fr-FR/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/circuit.po b/fr-FR/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/fr-FR/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/logging-LinLog.po b/fr-FR/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/fr-FR/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/logging-qle.po b/fr-FR/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/fr-FR/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/fr-FR/logging-xlog.po b/fr-FR/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/fr-FR/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/fr-FR/logging.po b/fr-FR/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/fr-FR/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-aldo.po b/fr-FR/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/fr-FR/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-cwdaemon.po b/fr-FR/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/fr-FR/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-cwirc.po b/fr-FR/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/fr-FR/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/fr-FR/others-demorse.po b/fr-FR/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/fr-FR/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-dxcc.po b/fr-FR/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/fr-FR/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/fr-FR/others-echolinux.po b/fr-FR/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/fr-FR/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-gpredict.po b/fr-FR/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/fr-FR/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/fr-FR/others-gpsman.po b/fr-FR/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/fr-FR/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-gresistor.po b/fr-FR/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/fr-FR/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/fr-FR/others-gridloc.po b/fr-FR/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/fr-FR/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-gtkwave.po b/fr-FR/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/fr-FR/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-ibp.po b/fr-FR/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/fr-FR/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/fr-FR/others-morse2txt.po b/fr-FR/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/fr-FR/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-ssbd.po b/fr-FR/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/fr-FR/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-svxlink.po b/fr-FR/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/fr-FR/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-thebridge.po b/fr-FR/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/fr-FR/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-tqsllib.po b/fr-FR/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/fr-FR/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-trustedqsl.po b/fr-FR/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/fr-FR/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-unixcw.po b/fr-FR/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/fr-FR/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-wxapt.po b/fr-FR/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/fr-FR/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others-xgridloc.po b/fr-FR/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/fr-FR/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/fr-FR/others-xwota.po b/fr-FR/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/fr-FR/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/fr-FR/others-xwxapt.po b/fr-FR/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/fr-FR/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/others.po b/fr-FR/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/fr-FR/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-aprsd.po b/fr-FR/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/fr-FR/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-ax25-apps.po b/fr-FR/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/fr-FR/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-ax25-tools.po b/fr-FR/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/fr-FR/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-colordx.po b/fr-FR/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/fr-FR/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/fr-FR/packet-libax25.po b/fr-FR/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/fr-FR/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-node.po b/fr-FR/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/fr-FR/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/packet-xastir.po b/fr-FR/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/fr-FR/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/fr-FR/packet-xconvers.po b/fr-FR/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/fr-FR/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/fr-FR/packet-xdx.po b/fr-FR/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/fr-FR/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/fr-FR/packet.po b/fr-FR/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/fr-FR/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/rig-grig.po b/fr-FR/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/fr-FR/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/fr-FR/rig-hamlib.po b/fr-FR/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/fr-FR/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/rig.po b/fr-FR/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/fr-FR/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/fr-FR/sdr-gnuradio.po b/fr-FR/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/fr-FR/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/sdr.po b/fr-FR/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/fr-FR/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/fr-FR/soundcard-fldigi.po b/fr-FR/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/fr-FR/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/fr-FR/soundcard-gmfsk.po b/fr-FR/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/fr-FR/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-gpsk31.po b/fr-FR/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/fr-FR/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-linpsk.po b/fr-FR/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/fr-FR/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-lpsk31.po b/fr-FR/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/fr-FR/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-qsstv.po b/fr-FR/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/fr-FR/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-xfhell.po b/fr-FR/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/fr-FR/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard-xpsk31.po b/fr-FR/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/fr-FR/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/fr-FR/soundcard.po b/fr-FR/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/fr-FR/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/he-IL/Amateur_Radio_Guide.po b/he-IL/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/he-IL/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/he-IL/Article_Info.po b/he-IL/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/he-IL/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/he-IL/Author_Group.po b/he-IL/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/he-IL/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/he-IL/Installing_Software.po b/he-IL/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/he-IL/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/he-IL/Revision_History.po b/he-IL/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/he-IL/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/he-IL/antenna-nec2c.po b/he-IL/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/he-IL/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/he-IL/antenna-splat.po b/he-IL/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/he-IL/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/he-IL/antenna-xnec2c.po b/he-IL/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/he-IL/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/he-IL/antenna.po b/he-IL/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/he-IL/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-geda.po b/he-IL/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/he-IL/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/he-IL/circuit-gerbv.po b/he-IL/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/he-IL/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/he-IL/circuit-gnucap.po b/he-IL/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/he-IL/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-gspiceui.po b/he-IL/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/he-IL/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/he-IL/circuit-iverilog.po b/he-IL/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/he-IL/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-kicad.po b/he-IL/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/he-IL/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-ngspice.po b/he-IL/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/he-IL/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-pcb.po b/he-IL/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/he-IL/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/he-IL/circuit-qucs.po b/he-IL/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/he-IL/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit-xcircuit.po b/he-IL/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/he-IL/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/circuit.po b/he-IL/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/he-IL/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/logging-LinLog.po b/he-IL/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/he-IL/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/he-IL/logging-qle.po b/he-IL/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/he-IL/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/he-IL/logging-xlog.po b/he-IL/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/he-IL/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/he-IL/logging.po b/he-IL/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/he-IL/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-aldo.po b/he-IL/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/he-IL/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-cwdaemon.po b/he-IL/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/he-IL/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-cwirc.po b/he-IL/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/he-IL/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/he-IL/others-demorse.po b/he-IL/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/he-IL/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-dxcc.po b/he-IL/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/he-IL/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/he-IL/others-echolinux.po b/he-IL/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/he-IL/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-gpredict.po b/he-IL/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/he-IL/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/he-IL/others-gpsman.po b/he-IL/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/he-IL/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-gresistor.po b/he-IL/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/he-IL/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/he-IL/others-gridloc.po b/he-IL/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/he-IL/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-gtkwave.po b/he-IL/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/he-IL/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-ibp.po b/he-IL/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/he-IL/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/he-IL/others-morse2txt.po b/he-IL/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/he-IL/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-ssbd.po b/he-IL/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/he-IL/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-svxlink.po b/he-IL/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/he-IL/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-thebridge.po b/he-IL/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/he-IL/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-tqsllib.po b/he-IL/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/he-IL/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-trustedqsl.po b/he-IL/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/he-IL/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-unixcw.po b/he-IL/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/he-IL/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-wxapt.po b/he-IL/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/he-IL/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others-xgridloc.po b/he-IL/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/he-IL/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/he-IL/others-xwota.po b/he-IL/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/he-IL/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/he-IL/others-xwxapt.po b/he-IL/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/he-IL/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/others.po b/he-IL/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/he-IL/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-aprsd.po b/he-IL/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/he-IL/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-ax25-apps.po b/he-IL/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/he-IL/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-ax25-tools.po b/he-IL/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/he-IL/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-colordx.po b/he-IL/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/he-IL/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/he-IL/packet-libax25.po b/he-IL/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/he-IL/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-node.po b/he-IL/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/he-IL/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/packet-xastir.po b/he-IL/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/he-IL/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/he-IL/packet-xconvers.po b/he-IL/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/he-IL/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/he-IL/packet-xdx.po b/he-IL/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/he-IL/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/he-IL/packet.po b/he-IL/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/he-IL/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/rig-grig.po b/he-IL/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/he-IL/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/he-IL/rig-hamlib.po b/he-IL/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/he-IL/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/he-IL/rig.po b/he-IL/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/he-IL/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/he-IL/sdr-gnuradio.po b/he-IL/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/he-IL/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/he-IL/sdr.po b/he-IL/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/he-IL/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/he-IL/soundcard-fldigi.po b/he-IL/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/he-IL/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/he-IL/soundcard-gmfsk.po b/he-IL/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/he-IL/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-gpsk31.po b/he-IL/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/he-IL/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-linpsk.po b/he-IL/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/he-IL/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-lpsk31.po b/he-IL/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/he-IL/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-qsstv.po b/he-IL/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/he-IL/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-xfhell.po b/he-IL/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/he-IL/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard-xpsk31.po b/he-IL/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/he-IL/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/he-IL/soundcard.po b/he-IL/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/he-IL/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/id-ID/Amateur_Radio_Guide.po b/id-ID/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/id-ID/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/id-ID/Article_Info.po b/id-ID/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/id-ID/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/id-ID/Author_Group.po b/id-ID/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/id-ID/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/id-ID/Installing_Software.po b/id-ID/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/id-ID/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/id-ID/Revision_History.po b/id-ID/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/id-ID/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/id-ID/antenna-nec2c.po b/id-ID/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/id-ID/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/id-ID/antenna-splat.po b/id-ID/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/id-ID/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/id-ID/antenna-xnec2c.po b/id-ID/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/id-ID/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/id-ID/antenna.po b/id-ID/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/id-ID/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-geda.po b/id-ID/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/id-ID/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/id-ID/circuit-gerbv.po b/id-ID/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/id-ID/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/id-ID/circuit-gnucap.po b/id-ID/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/id-ID/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-gspiceui.po b/id-ID/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/id-ID/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/id-ID/circuit-iverilog.po b/id-ID/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/id-ID/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-kicad.po b/id-ID/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/id-ID/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-ngspice.po b/id-ID/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/id-ID/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-pcb.po b/id-ID/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/id-ID/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/id-ID/circuit-qucs.po b/id-ID/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/id-ID/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit-xcircuit.po b/id-ID/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/id-ID/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/circuit.po b/id-ID/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/id-ID/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/logging-LinLog.po b/id-ID/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/id-ID/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/id-ID/logging-qle.po b/id-ID/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/id-ID/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/id-ID/logging-xlog.po b/id-ID/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/id-ID/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/id-ID/logging.po b/id-ID/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/id-ID/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-aldo.po b/id-ID/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/id-ID/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-cwdaemon.po b/id-ID/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/id-ID/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-cwirc.po b/id-ID/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/id-ID/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/id-ID/others-demorse.po b/id-ID/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/id-ID/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-dxcc.po b/id-ID/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/id-ID/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/id-ID/others-echolinux.po b/id-ID/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/id-ID/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-gpredict.po b/id-ID/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/id-ID/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/id-ID/others-gpsman.po b/id-ID/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/id-ID/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-gresistor.po b/id-ID/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/id-ID/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/id-ID/others-gridloc.po b/id-ID/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/id-ID/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-gtkwave.po b/id-ID/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/id-ID/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-ibp.po b/id-ID/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/id-ID/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/id-ID/others-morse2txt.po b/id-ID/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/id-ID/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-ssbd.po b/id-ID/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/id-ID/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-svxlink.po b/id-ID/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/id-ID/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-thebridge.po b/id-ID/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/id-ID/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-tqsllib.po b/id-ID/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/id-ID/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-trustedqsl.po b/id-ID/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/id-ID/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-unixcw.po b/id-ID/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/id-ID/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-wxapt.po b/id-ID/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/id-ID/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others-xgridloc.po b/id-ID/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/id-ID/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/id-ID/others-xwota.po b/id-ID/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/id-ID/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/id-ID/others-xwxapt.po b/id-ID/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/id-ID/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/others.po b/id-ID/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/id-ID/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-aprsd.po b/id-ID/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/id-ID/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-ax25-apps.po b/id-ID/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/id-ID/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-ax25-tools.po b/id-ID/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/id-ID/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-colordx.po b/id-ID/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/id-ID/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/id-ID/packet-libax25.po b/id-ID/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/id-ID/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-node.po b/id-ID/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/id-ID/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/packet-xastir.po b/id-ID/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/id-ID/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/id-ID/packet-xconvers.po b/id-ID/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/id-ID/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/id-ID/packet-xdx.po b/id-ID/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/id-ID/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/id-ID/packet.po b/id-ID/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/id-ID/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/rig-grig.po b/id-ID/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/id-ID/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/id-ID/rig-hamlib.po b/id-ID/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/id-ID/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/id-ID/rig.po b/id-ID/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/id-ID/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/id-ID/sdr-gnuradio.po b/id-ID/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/id-ID/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/id-ID/sdr.po b/id-ID/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/id-ID/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/id-ID/soundcard-fldigi.po b/id-ID/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/id-ID/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/id-ID/soundcard-gmfsk.po b/id-ID/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/id-ID/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-gpsk31.po b/id-ID/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/id-ID/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-linpsk.po b/id-ID/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/id-ID/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-lpsk31.po b/id-ID/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/id-ID/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-qsstv.po b/id-ID/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/id-ID/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-xfhell.po b/id-ID/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/id-ID/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard-xpsk31.po b/id-ID/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/id-ID/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/id-ID/soundcard.po b/id-ID/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/id-ID/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/it-IT/Amateur_Radio_Guide.po b/it-IT/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/it-IT/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/it-IT/Article_Info.po b/it-IT/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/it-IT/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/it-IT/Author_Group.po b/it-IT/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/it-IT/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/it-IT/Installing_Software.po b/it-IT/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/it-IT/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/it-IT/Revision_History.po b/it-IT/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/it-IT/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/it-IT/antenna-nec2c.po b/it-IT/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/it-IT/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/it-IT/antenna-splat.po b/it-IT/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/it-IT/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/it-IT/antenna-xnec2c.po b/it-IT/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/it-IT/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/it-IT/antenna.po b/it-IT/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/it-IT/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-geda.po b/it-IT/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/it-IT/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/it-IT/circuit-gerbv.po b/it-IT/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/it-IT/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/it-IT/circuit-gnucap.po b/it-IT/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/it-IT/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-gspiceui.po b/it-IT/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/it-IT/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/it-IT/circuit-iverilog.po b/it-IT/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/it-IT/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-kicad.po b/it-IT/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/it-IT/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-ngspice.po b/it-IT/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/it-IT/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-pcb.po b/it-IT/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/it-IT/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/it-IT/circuit-qucs.po b/it-IT/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/it-IT/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit-xcircuit.po b/it-IT/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/it-IT/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/circuit.po b/it-IT/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/it-IT/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/logging-LinLog.po b/it-IT/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/it-IT/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/it-IT/logging-qle.po b/it-IT/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/it-IT/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/it-IT/logging-xlog.po b/it-IT/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/it-IT/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/it-IT/logging.po b/it-IT/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/it-IT/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-aldo.po b/it-IT/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/it-IT/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-cwdaemon.po b/it-IT/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/it-IT/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-cwirc.po b/it-IT/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/it-IT/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/it-IT/others-demorse.po b/it-IT/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/it-IT/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-dxcc.po b/it-IT/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/it-IT/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/it-IT/others-echolinux.po b/it-IT/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/it-IT/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-gpredict.po b/it-IT/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/it-IT/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/it-IT/others-gpsman.po b/it-IT/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/it-IT/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-gresistor.po b/it-IT/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/it-IT/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/it-IT/others-gridloc.po b/it-IT/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/it-IT/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-gtkwave.po b/it-IT/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/it-IT/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-ibp.po b/it-IT/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/it-IT/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/it-IT/others-morse2txt.po b/it-IT/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/it-IT/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-ssbd.po b/it-IT/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/it-IT/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-svxlink.po b/it-IT/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/it-IT/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-thebridge.po b/it-IT/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/it-IT/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-tqsllib.po b/it-IT/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/it-IT/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-trustedqsl.po b/it-IT/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/it-IT/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-unixcw.po b/it-IT/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/it-IT/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-wxapt.po b/it-IT/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/it-IT/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others-xgridloc.po b/it-IT/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/it-IT/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/it-IT/others-xwota.po b/it-IT/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/it-IT/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/it-IT/others-xwxapt.po b/it-IT/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/it-IT/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/others.po b/it-IT/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/it-IT/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-aprsd.po b/it-IT/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/it-IT/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-ax25-apps.po b/it-IT/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/it-IT/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-ax25-tools.po b/it-IT/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/it-IT/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-colordx.po b/it-IT/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/it-IT/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/it-IT/packet-libax25.po b/it-IT/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/it-IT/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-node.po b/it-IT/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/it-IT/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/packet-xastir.po b/it-IT/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/it-IT/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/it-IT/packet-xconvers.po b/it-IT/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/it-IT/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/it-IT/packet-xdx.po b/it-IT/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/it-IT/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/it-IT/packet.po b/it-IT/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/it-IT/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/rig-grig.po b/it-IT/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/it-IT/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/it-IT/rig-hamlib.po b/it-IT/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/it-IT/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/it-IT/rig.po b/it-IT/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/it-IT/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/it-IT/sdr-gnuradio.po b/it-IT/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/it-IT/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/it-IT/sdr.po b/it-IT/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/it-IT/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/it-IT/soundcard-fldigi.po b/it-IT/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/it-IT/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/it-IT/soundcard-gmfsk.po b/it-IT/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/it-IT/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-gpsk31.po b/it-IT/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/it-IT/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-linpsk.po b/it-IT/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/it-IT/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-lpsk31.po b/it-IT/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/it-IT/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-qsstv.po b/it-IT/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/it-IT/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-xfhell.po b/it-IT/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/it-IT/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard-xpsk31.po b/it-IT/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/it-IT/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/it-IT/soundcard.po b/it-IT/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/it-IT/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/ja-JP/Amateur_Radio_Guide.po b/ja-JP/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/ja-JP/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/ja-JP/Article_Info.po b/ja-JP/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/ja-JP/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/ja-JP/Author_Group.po b/ja-JP/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/ja-JP/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/ja-JP/Installing_Software.po b/ja-JP/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/ja-JP/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/ja-JP/Revision_History.po b/ja-JP/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/ja-JP/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/ja-JP/antenna-nec2c.po b/ja-JP/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/ja-JP/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/antenna-splat.po b/ja-JP/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/ja-JP/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/ja-JP/antenna-xnec2c.po b/ja-JP/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/ja-JP/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/ja-JP/antenna.po b/ja-JP/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/ja-JP/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-geda.po b/ja-JP/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/ja-JP/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/ja-JP/circuit-gerbv.po b/ja-JP/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/ja-JP/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/ja-JP/circuit-gnucap.po b/ja-JP/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/ja-JP/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-gspiceui.po b/ja-JP/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/ja-JP/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/ja-JP/circuit-iverilog.po b/ja-JP/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/ja-JP/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-kicad.po b/ja-JP/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/ja-JP/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-ngspice.po b/ja-JP/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/ja-JP/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-pcb.po b/ja-JP/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/ja-JP/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/ja-JP/circuit-qucs.po b/ja-JP/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/ja-JP/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit-xcircuit.po b/ja-JP/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/ja-JP/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/circuit.po b/ja-JP/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/ja-JP/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/logging-LinLog.po b/ja-JP/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/ja-JP/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/logging-qle.po b/ja-JP/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/ja-JP/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/ja-JP/logging-xlog.po b/ja-JP/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/ja-JP/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/ja-JP/logging.po b/ja-JP/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/ja-JP/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-aldo.po b/ja-JP/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/ja-JP/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-cwdaemon.po b/ja-JP/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/ja-JP/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-cwirc.po b/ja-JP/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/ja-JP/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/ja-JP/others-demorse.po b/ja-JP/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/ja-JP/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-dxcc.po b/ja-JP/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/ja-JP/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/ja-JP/others-echolinux.po b/ja-JP/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/ja-JP/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-gpredict.po b/ja-JP/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/ja-JP/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/ja-JP/others-gpsman.po b/ja-JP/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/ja-JP/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-gresistor.po b/ja-JP/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/ja-JP/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/ja-JP/others-gridloc.po b/ja-JP/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/ja-JP/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-gtkwave.po b/ja-JP/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/ja-JP/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-ibp.po b/ja-JP/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/ja-JP/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/ja-JP/others-morse2txt.po b/ja-JP/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/ja-JP/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-ssbd.po b/ja-JP/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/ja-JP/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-svxlink.po b/ja-JP/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/ja-JP/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-thebridge.po b/ja-JP/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/ja-JP/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-tqsllib.po b/ja-JP/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/ja-JP/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-trustedqsl.po b/ja-JP/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/ja-JP/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-unixcw.po b/ja-JP/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/ja-JP/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-wxapt.po b/ja-JP/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/ja-JP/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others-xgridloc.po b/ja-JP/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/ja-JP/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/ja-JP/others-xwota.po b/ja-JP/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/ja-JP/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/ja-JP/others-xwxapt.po b/ja-JP/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/ja-JP/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/others.po b/ja-JP/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/ja-JP/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-aprsd.po b/ja-JP/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/ja-JP/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-ax25-apps.po b/ja-JP/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/ja-JP/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-ax25-tools.po b/ja-JP/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/ja-JP/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-colordx.po b/ja-JP/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/ja-JP/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/ja-JP/packet-libax25.po b/ja-JP/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/ja-JP/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-node.po b/ja-JP/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/ja-JP/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/packet-xastir.po b/ja-JP/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/ja-JP/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/ja-JP/packet-xconvers.po b/ja-JP/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/ja-JP/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/ja-JP/packet-xdx.po b/ja-JP/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/ja-JP/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/ja-JP/packet.po b/ja-JP/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/ja-JP/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/rig-grig.po b/ja-JP/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/ja-JP/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/ja-JP/rig-hamlib.po b/ja-JP/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/ja-JP/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/rig.po b/ja-JP/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/ja-JP/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/ja-JP/sdr-gnuradio.po b/ja-JP/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/ja-JP/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/sdr.po b/ja-JP/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/ja-JP/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ja-JP/soundcard-fldigi.po b/ja-JP/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/ja-JP/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/ja-JP/soundcard-gmfsk.po b/ja-JP/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/ja-JP/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-gpsk31.po b/ja-JP/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/ja-JP/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-linpsk.po b/ja-JP/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/ja-JP/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-lpsk31.po b/ja-JP/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/ja-JP/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-qsstv.po b/ja-JP/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/ja-JP/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-xfhell.po b/ja-JP/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/ja-JP/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard-xpsk31.po b/ja-JP/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/ja-JP/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/ja-JP/soundcard.po b/ja-JP/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/ja-JP/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/nl-NL/Amateur_Radio_Guide.po b/nl-NL/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/nl-NL/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/nl-NL/Article_Info.po b/nl-NL/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/nl-NL/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/nl-NL/Author_Group.po b/nl-NL/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/nl-NL/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/nl-NL/Installing_Software.po b/nl-NL/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/nl-NL/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/nl-NL/Revision_History.po b/nl-NL/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/nl-NL/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/nl-NL/antenna-nec2c.po b/nl-NL/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/nl-NL/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/antenna-splat.po b/nl-NL/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/nl-NL/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/nl-NL/antenna-xnec2c.po b/nl-NL/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/nl-NL/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/nl-NL/antenna.po b/nl-NL/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/nl-NL/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-geda.po b/nl-NL/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/nl-NL/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/nl-NL/circuit-gerbv.po b/nl-NL/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/nl-NL/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/nl-NL/circuit-gnucap.po b/nl-NL/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/nl-NL/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-gspiceui.po b/nl-NL/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/nl-NL/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/nl-NL/circuit-iverilog.po b/nl-NL/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/nl-NL/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-kicad.po b/nl-NL/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/nl-NL/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-ngspice.po b/nl-NL/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/nl-NL/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-pcb.po b/nl-NL/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/nl-NL/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/nl-NL/circuit-qucs.po b/nl-NL/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/nl-NL/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit-xcircuit.po b/nl-NL/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/nl-NL/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/circuit.po b/nl-NL/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/nl-NL/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/logging-LinLog.po b/nl-NL/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/nl-NL/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/logging-qle.po b/nl-NL/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/nl-NL/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/nl-NL/logging-xlog.po b/nl-NL/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/nl-NL/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/nl-NL/logging.po b/nl-NL/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/nl-NL/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-aldo.po b/nl-NL/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/nl-NL/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-cwdaemon.po b/nl-NL/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/nl-NL/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-cwirc.po b/nl-NL/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/nl-NL/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/nl-NL/others-demorse.po b/nl-NL/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/nl-NL/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-dxcc.po b/nl-NL/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/nl-NL/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/nl-NL/others-echolinux.po b/nl-NL/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/nl-NL/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-gpredict.po b/nl-NL/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/nl-NL/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/nl-NL/others-gpsman.po b/nl-NL/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/nl-NL/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-gresistor.po b/nl-NL/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/nl-NL/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/nl-NL/others-gridloc.po b/nl-NL/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/nl-NL/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-gtkwave.po b/nl-NL/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/nl-NL/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-ibp.po b/nl-NL/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/nl-NL/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/nl-NL/others-morse2txt.po b/nl-NL/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/nl-NL/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-ssbd.po b/nl-NL/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/nl-NL/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-svxlink.po b/nl-NL/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/nl-NL/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-thebridge.po b/nl-NL/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/nl-NL/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-tqsllib.po b/nl-NL/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/nl-NL/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-trustedqsl.po b/nl-NL/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/nl-NL/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-unixcw.po b/nl-NL/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/nl-NL/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-wxapt.po b/nl-NL/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/nl-NL/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others-xgridloc.po b/nl-NL/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/nl-NL/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/nl-NL/others-xwota.po b/nl-NL/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/nl-NL/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/nl-NL/others-xwxapt.po b/nl-NL/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/nl-NL/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/others.po b/nl-NL/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/nl-NL/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-aprsd.po b/nl-NL/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/nl-NL/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-ax25-apps.po b/nl-NL/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/nl-NL/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-ax25-tools.po b/nl-NL/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/nl-NL/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-colordx.po b/nl-NL/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/nl-NL/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/nl-NL/packet-libax25.po b/nl-NL/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/nl-NL/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-node.po b/nl-NL/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/nl-NL/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/packet-xastir.po b/nl-NL/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/nl-NL/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/nl-NL/packet-xconvers.po b/nl-NL/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/nl-NL/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/nl-NL/packet-xdx.po b/nl-NL/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/nl-NL/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/nl-NL/packet.po b/nl-NL/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/nl-NL/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/rig-grig.po b/nl-NL/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/nl-NL/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/nl-NL/rig-hamlib.po b/nl-NL/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/nl-NL/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/rig.po b/nl-NL/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/nl-NL/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/nl-NL/sdr-gnuradio.po b/nl-NL/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/nl-NL/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/sdr.po b/nl-NL/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/nl-NL/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/nl-NL/soundcard-fldigi.po b/nl-NL/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/nl-NL/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/nl-NL/soundcard-gmfsk.po b/nl-NL/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/nl-NL/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-gpsk31.po b/nl-NL/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/nl-NL/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-linpsk.po b/nl-NL/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/nl-NL/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-lpsk31.po b/nl-NL/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/nl-NL/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-qsstv.po b/nl-NL/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/nl-NL/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-xfhell.po b/nl-NL/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/nl-NL/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard-xpsk31.po b/nl-NL/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/nl-NL/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/nl-NL/soundcard.po b/nl-NL/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/nl-NL/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/pl-PL/Amateur_Radio_Guide.po b/pl-PL/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/pl-PL/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/pl-PL/Article_Info.po b/pl-PL/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/pl-PL/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/pl-PL/Author_Group.po b/pl-PL/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/pl-PL/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/pl-PL/Installing_Software.po b/pl-PL/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/pl-PL/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/pl-PL/Revision_History.po b/pl-PL/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/pl-PL/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/pl-PL/antenna-nec2c.po b/pl-PL/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/pl-PL/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/antenna-splat.po b/pl-PL/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/pl-PL/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/pl-PL/antenna-xnec2c.po b/pl-PL/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/pl-PL/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/pl-PL/antenna.po b/pl-PL/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/pl-PL/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-geda.po b/pl-PL/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/pl-PL/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/pl-PL/circuit-gerbv.po b/pl-PL/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/pl-PL/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/pl-PL/circuit-gnucap.po b/pl-PL/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/pl-PL/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-gspiceui.po b/pl-PL/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/pl-PL/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/pl-PL/circuit-iverilog.po b/pl-PL/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/pl-PL/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-kicad.po b/pl-PL/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/pl-PL/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-ngspice.po b/pl-PL/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/pl-PL/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-pcb.po b/pl-PL/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/pl-PL/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/pl-PL/circuit-qucs.po b/pl-PL/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/pl-PL/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit-xcircuit.po b/pl-PL/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/pl-PL/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/circuit.po b/pl-PL/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/pl-PL/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/logging-LinLog.po b/pl-PL/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/pl-PL/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/logging-qle.po b/pl-PL/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/pl-PL/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/pl-PL/logging-xlog.po b/pl-PL/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/pl-PL/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/pl-PL/logging.po b/pl-PL/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/pl-PL/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-aldo.po b/pl-PL/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/pl-PL/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-cwdaemon.po b/pl-PL/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/pl-PL/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-cwirc.po b/pl-PL/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/pl-PL/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/pl-PL/others-demorse.po b/pl-PL/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/pl-PL/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-dxcc.po b/pl-PL/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/pl-PL/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/pl-PL/others-echolinux.po b/pl-PL/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/pl-PL/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-gpredict.po b/pl-PL/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/pl-PL/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/pl-PL/others-gpsman.po b/pl-PL/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/pl-PL/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-gresistor.po b/pl-PL/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/pl-PL/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/pl-PL/others-gridloc.po b/pl-PL/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/pl-PL/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-gtkwave.po b/pl-PL/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/pl-PL/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-ibp.po b/pl-PL/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/pl-PL/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/pl-PL/others-morse2txt.po b/pl-PL/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/pl-PL/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-ssbd.po b/pl-PL/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/pl-PL/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-svxlink.po b/pl-PL/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/pl-PL/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-thebridge.po b/pl-PL/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/pl-PL/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-tqsllib.po b/pl-PL/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/pl-PL/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-trustedqsl.po b/pl-PL/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/pl-PL/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-unixcw.po b/pl-PL/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/pl-PL/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-wxapt.po b/pl-PL/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/pl-PL/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others-xgridloc.po b/pl-PL/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/pl-PL/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/pl-PL/others-xwota.po b/pl-PL/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/pl-PL/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/pl-PL/others-xwxapt.po b/pl-PL/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/pl-PL/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/others.po b/pl-PL/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/pl-PL/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-aprsd.po b/pl-PL/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/pl-PL/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-ax25-apps.po b/pl-PL/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/pl-PL/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-ax25-tools.po b/pl-PL/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/pl-PL/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-colordx.po b/pl-PL/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/pl-PL/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/pl-PL/packet-libax25.po b/pl-PL/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/pl-PL/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-node.po b/pl-PL/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/pl-PL/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/packet-xastir.po b/pl-PL/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/pl-PL/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/pl-PL/packet-xconvers.po b/pl-PL/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/pl-PL/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/pl-PL/packet-xdx.po b/pl-PL/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/pl-PL/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/pl-PL/packet.po b/pl-PL/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/pl-PL/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/rig-grig.po b/pl-PL/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/pl-PL/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/pl-PL/rig-hamlib.po b/pl-PL/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/pl-PL/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/rig.po b/pl-PL/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/pl-PL/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/pl-PL/sdr-gnuradio.po b/pl-PL/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/pl-PL/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/sdr.po b/pl-PL/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/pl-PL/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pl-PL/soundcard-fldigi.po b/pl-PL/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/pl-PL/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/pl-PL/soundcard-gmfsk.po b/pl-PL/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/pl-PL/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-gpsk31.po b/pl-PL/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/pl-PL/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-linpsk.po b/pl-PL/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/pl-PL/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-lpsk31.po b/pl-PL/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/pl-PL/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-qsstv.po b/pl-PL/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/pl-PL/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-xfhell.po b/pl-PL/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/pl-PL/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard-xpsk31.po b/pl-PL/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/pl-PL/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/pl-PL/soundcard.po b/pl-PL/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/pl-PL/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/pt-BR/Amateur_Radio_Guide.po b/pt-BR/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/pt-BR/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/pt-BR/Article_Info.po b/pt-BR/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/pt-BR/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/pt-BR/Author_Group.po b/pt-BR/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/pt-BR/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/pt-BR/Installing_Software.po b/pt-BR/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/pt-BR/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/pt-BR/Revision_History.po b/pt-BR/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/pt-BR/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/pt-BR/antenna-nec2c.po b/pt-BR/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/pt-BR/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/antenna-splat.po b/pt-BR/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/pt-BR/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/pt-BR/antenna-xnec2c.po b/pt-BR/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/pt-BR/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/pt-BR/antenna.po b/pt-BR/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/pt-BR/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-geda.po b/pt-BR/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/pt-BR/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/pt-BR/circuit-gerbv.po b/pt-BR/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/pt-BR/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/pt-BR/circuit-gnucap.po b/pt-BR/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/pt-BR/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-gspiceui.po b/pt-BR/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/pt-BR/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/pt-BR/circuit-iverilog.po b/pt-BR/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/pt-BR/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-kicad.po b/pt-BR/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/pt-BR/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-ngspice.po b/pt-BR/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/pt-BR/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-pcb.po b/pt-BR/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/pt-BR/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/pt-BR/circuit-qucs.po b/pt-BR/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/pt-BR/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit-xcircuit.po b/pt-BR/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/pt-BR/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/circuit.po b/pt-BR/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/pt-BR/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/logging-LinLog.po b/pt-BR/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/pt-BR/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/logging-qle.po b/pt-BR/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/pt-BR/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/pt-BR/logging-xlog.po b/pt-BR/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/pt-BR/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/pt-BR/logging.po b/pt-BR/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/pt-BR/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-aldo.po b/pt-BR/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/pt-BR/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-cwdaemon.po b/pt-BR/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/pt-BR/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-cwirc.po b/pt-BR/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/pt-BR/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/pt-BR/others-demorse.po b/pt-BR/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/pt-BR/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-dxcc.po b/pt-BR/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/pt-BR/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/pt-BR/others-echolinux.po b/pt-BR/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/pt-BR/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-gpredict.po b/pt-BR/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/pt-BR/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/pt-BR/others-gpsman.po b/pt-BR/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/pt-BR/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-gresistor.po b/pt-BR/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/pt-BR/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/pt-BR/others-gridloc.po b/pt-BR/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/pt-BR/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-gtkwave.po b/pt-BR/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/pt-BR/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-ibp.po b/pt-BR/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/pt-BR/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/pt-BR/others-morse2txt.po b/pt-BR/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/pt-BR/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-ssbd.po b/pt-BR/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/pt-BR/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-svxlink.po b/pt-BR/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/pt-BR/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-thebridge.po b/pt-BR/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/pt-BR/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-tqsllib.po b/pt-BR/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/pt-BR/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-trustedqsl.po b/pt-BR/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/pt-BR/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-unixcw.po b/pt-BR/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/pt-BR/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-wxapt.po b/pt-BR/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/pt-BR/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others-xgridloc.po b/pt-BR/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/pt-BR/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/pt-BR/others-xwota.po b/pt-BR/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/pt-BR/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/pt-BR/others-xwxapt.po b/pt-BR/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/pt-BR/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/others.po b/pt-BR/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/pt-BR/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-aprsd.po b/pt-BR/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/pt-BR/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-ax25-apps.po b/pt-BR/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/pt-BR/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-ax25-tools.po b/pt-BR/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/pt-BR/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-colordx.po b/pt-BR/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/pt-BR/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/pt-BR/packet-libax25.po b/pt-BR/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/pt-BR/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-node.po b/pt-BR/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/pt-BR/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/packet-xastir.po b/pt-BR/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/pt-BR/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/pt-BR/packet-xconvers.po b/pt-BR/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/pt-BR/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/pt-BR/packet-xdx.po b/pt-BR/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/pt-BR/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/pt-BR/packet.po b/pt-BR/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/pt-BR/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/rig-grig.po b/pt-BR/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/pt-BR/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/pt-BR/rig-hamlib.po b/pt-BR/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/pt-BR/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/rig.po b/pt-BR/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/pt-BR/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/pt-BR/sdr-gnuradio.po b/pt-BR/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/pt-BR/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/sdr.po b/pt-BR/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/pt-BR/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-BR/soundcard-fldigi.po b/pt-BR/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/pt-BR/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/pt-BR/soundcard-gmfsk.po b/pt-BR/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/pt-BR/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-gpsk31.po b/pt-BR/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/pt-BR/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-linpsk.po b/pt-BR/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/pt-BR/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-lpsk31.po b/pt-BR/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/pt-BR/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-qsstv.po b/pt-BR/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/pt-BR/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-xfhell.po b/pt-BR/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/pt-BR/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard-xpsk31.po b/pt-BR/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/pt-BR/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/pt-BR/soundcard.po b/pt-BR/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/pt-BR/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/pt-PT/Amateur_Radio_Guide.po b/pt-PT/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/pt-PT/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/pt-PT/Article_Info.po b/pt-PT/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/pt-PT/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/pt-PT/Author_Group.po b/pt-PT/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/pt-PT/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/pt-PT/Installing_Software.po b/pt-PT/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/pt-PT/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/pt-PT/Revision_History.po b/pt-PT/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/pt-PT/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/pt-PT/antenna-nec2c.po b/pt-PT/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/pt-PT/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/antenna-splat.po b/pt-PT/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/pt-PT/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/pt-PT/antenna-xnec2c.po b/pt-PT/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/pt-PT/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/pt-PT/antenna.po b/pt-PT/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/pt-PT/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-geda.po b/pt-PT/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/pt-PT/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/pt-PT/circuit-gerbv.po b/pt-PT/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/pt-PT/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/pt-PT/circuit-gnucap.po b/pt-PT/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/pt-PT/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-gspiceui.po b/pt-PT/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/pt-PT/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/pt-PT/circuit-iverilog.po b/pt-PT/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/pt-PT/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-kicad.po b/pt-PT/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/pt-PT/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-ngspice.po b/pt-PT/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/pt-PT/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-pcb.po b/pt-PT/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/pt-PT/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/pt-PT/circuit-qucs.po b/pt-PT/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/pt-PT/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit-xcircuit.po b/pt-PT/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/pt-PT/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/circuit.po b/pt-PT/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/pt-PT/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/logging-LinLog.po b/pt-PT/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/pt-PT/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/logging-qle.po b/pt-PT/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/pt-PT/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/pt-PT/logging-xlog.po b/pt-PT/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/pt-PT/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/pt-PT/logging.po b/pt-PT/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/pt-PT/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-aldo.po b/pt-PT/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/pt-PT/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-cwdaemon.po b/pt-PT/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/pt-PT/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-cwirc.po b/pt-PT/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/pt-PT/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/pt-PT/others-demorse.po b/pt-PT/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/pt-PT/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-dxcc.po b/pt-PT/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/pt-PT/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/pt-PT/others-echolinux.po b/pt-PT/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/pt-PT/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-gpredict.po b/pt-PT/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/pt-PT/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/pt-PT/others-gpsman.po b/pt-PT/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/pt-PT/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-gresistor.po b/pt-PT/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/pt-PT/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/pt-PT/others-gridloc.po b/pt-PT/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/pt-PT/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-gtkwave.po b/pt-PT/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/pt-PT/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-ibp.po b/pt-PT/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/pt-PT/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/pt-PT/others-morse2txt.po b/pt-PT/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/pt-PT/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-ssbd.po b/pt-PT/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/pt-PT/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-svxlink.po b/pt-PT/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/pt-PT/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-thebridge.po b/pt-PT/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/pt-PT/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-tqsllib.po b/pt-PT/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/pt-PT/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-trustedqsl.po b/pt-PT/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/pt-PT/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-unixcw.po b/pt-PT/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/pt-PT/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-wxapt.po b/pt-PT/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/pt-PT/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others-xgridloc.po b/pt-PT/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/pt-PT/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/pt-PT/others-xwota.po b/pt-PT/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/pt-PT/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/pt-PT/others-xwxapt.po b/pt-PT/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/pt-PT/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/others.po b/pt-PT/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/pt-PT/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-aprsd.po b/pt-PT/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/pt-PT/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-ax25-apps.po b/pt-PT/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/pt-PT/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-ax25-tools.po b/pt-PT/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/pt-PT/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-colordx.po b/pt-PT/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/pt-PT/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/pt-PT/packet-libax25.po b/pt-PT/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/pt-PT/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-node.po b/pt-PT/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/pt-PT/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/packet-xastir.po b/pt-PT/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/pt-PT/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/pt-PT/packet-xconvers.po b/pt-PT/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/pt-PT/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/pt-PT/packet-xdx.po b/pt-PT/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/pt-PT/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/pt-PT/packet.po b/pt-PT/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/pt-PT/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/rig-grig.po b/pt-PT/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/pt-PT/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/pt-PT/rig-hamlib.po b/pt-PT/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/pt-PT/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/rig.po b/pt-PT/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/pt-PT/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/pt-PT/sdr-gnuradio.po b/pt-PT/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/pt-PT/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/sdr.po b/pt-PT/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/pt-PT/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/pt-PT/soundcard-fldigi.po b/pt-PT/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/pt-PT/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/pt-PT/soundcard-gmfsk.po b/pt-PT/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/pt-PT/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-gpsk31.po b/pt-PT/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/pt-PT/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-linpsk.po b/pt-PT/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/pt-PT/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-lpsk31.po b/pt-PT/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/pt-PT/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-qsstv.po b/pt-PT/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/pt-PT/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-xfhell.po b/pt-PT/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/pt-PT/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard-xpsk31.po b/pt-PT/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/pt-PT/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/pt-PT/soundcard.po b/pt-PT/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/pt-PT/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/ru-RU/Amateur_Radio_Guide.po b/ru-RU/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/ru-RU/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/ru-RU/Article_Info.po b/ru-RU/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/ru-RU/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/ru-RU/Author_Group.po b/ru-RU/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/ru-RU/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/ru-RU/Installing_Software.po b/ru-RU/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/ru-RU/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/ru-RU/Revision_History.po b/ru-RU/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/ru-RU/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/ru-RU/antenna-nec2c.po b/ru-RU/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/ru-RU/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/antenna-splat.po b/ru-RU/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/ru-RU/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/ru-RU/antenna-xnec2c.po b/ru-RU/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/ru-RU/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/ru-RU/antenna.po b/ru-RU/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/ru-RU/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-geda.po b/ru-RU/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/ru-RU/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/ru-RU/circuit-gerbv.po b/ru-RU/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/ru-RU/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/ru-RU/circuit-gnucap.po b/ru-RU/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/ru-RU/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-gspiceui.po b/ru-RU/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/ru-RU/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/ru-RU/circuit-iverilog.po b/ru-RU/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/ru-RU/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-kicad.po b/ru-RU/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/ru-RU/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-ngspice.po b/ru-RU/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/ru-RU/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-pcb.po b/ru-RU/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/ru-RU/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/ru-RU/circuit-qucs.po b/ru-RU/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/ru-RU/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit-xcircuit.po b/ru-RU/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/ru-RU/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/circuit.po b/ru-RU/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/ru-RU/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/logging-LinLog.po b/ru-RU/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/ru-RU/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/logging-qle.po b/ru-RU/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/ru-RU/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/ru-RU/logging-xlog.po b/ru-RU/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/ru-RU/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/ru-RU/logging.po b/ru-RU/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/ru-RU/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-aldo.po b/ru-RU/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/ru-RU/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-cwdaemon.po b/ru-RU/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/ru-RU/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-cwirc.po b/ru-RU/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/ru-RU/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/ru-RU/others-demorse.po b/ru-RU/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/ru-RU/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-dxcc.po b/ru-RU/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/ru-RU/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/ru-RU/others-echolinux.po b/ru-RU/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/ru-RU/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-gpredict.po b/ru-RU/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/ru-RU/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/ru-RU/others-gpsman.po b/ru-RU/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/ru-RU/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-gresistor.po b/ru-RU/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/ru-RU/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/ru-RU/others-gridloc.po b/ru-RU/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/ru-RU/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-gtkwave.po b/ru-RU/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/ru-RU/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-ibp.po b/ru-RU/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/ru-RU/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/ru-RU/others-morse2txt.po b/ru-RU/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/ru-RU/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-ssbd.po b/ru-RU/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/ru-RU/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-svxlink.po b/ru-RU/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/ru-RU/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-thebridge.po b/ru-RU/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/ru-RU/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-tqsllib.po b/ru-RU/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/ru-RU/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-trustedqsl.po b/ru-RU/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/ru-RU/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-unixcw.po b/ru-RU/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/ru-RU/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-wxapt.po b/ru-RU/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/ru-RU/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others-xgridloc.po b/ru-RU/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/ru-RU/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/ru-RU/others-xwota.po b/ru-RU/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/ru-RU/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/ru-RU/others-xwxapt.po b/ru-RU/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/ru-RU/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/others.po b/ru-RU/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/ru-RU/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-aprsd.po b/ru-RU/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/ru-RU/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-ax25-apps.po b/ru-RU/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/ru-RU/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-ax25-tools.po b/ru-RU/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/ru-RU/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-colordx.po b/ru-RU/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/ru-RU/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/ru-RU/packet-libax25.po b/ru-RU/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/ru-RU/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-node.po b/ru-RU/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/ru-RU/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/packet-xastir.po b/ru-RU/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/ru-RU/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/ru-RU/packet-xconvers.po b/ru-RU/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/ru-RU/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/ru-RU/packet-xdx.po b/ru-RU/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/ru-RU/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/ru-RU/packet.po b/ru-RU/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/ru-RU/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/rig-grig.po b/ru-RU/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/ru-RU/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/ru-RU/rig-hamlib.po b/ru-RU/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/ru-RU/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/rig.po b/ru-RU/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/ru-RU/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/ru-RU/sdr-gnuradio.po b/ru-RU/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/ru-RU/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/sdr.po b/ru-RU/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/ru-RU/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/ru-RU/soundcard-fldigi.po b/ru-RU/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/ru-RU/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/ru-RU/soundcard-gmfsk.po b/ru-RU/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/ru-RU/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-gpsk31.po b/ru-RU/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/ru-RU/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-linpsk.po b/ru-RU/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/ru-RU/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-lpsk31.po b/ru-RU/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/ru-RU/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-qsstv.po b/ru-RU/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/ru-RU/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-xfhell.po b/ru-RU/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/ru-RU/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard-xpsk31.po b/ru-RU/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/ru-RU/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/ru-RU/soundcard.po b/ru-RU/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/ru-RU/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/sr-Latn-RS/Amateur_Radio_Guide.po b/sr-Latn-RS/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/sr-Latn-RS/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/sr-Latn-RS/Article_Info.po b/sr-Latn-RS/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/sr-Latn-RS/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/sr-Latn-RS/Author_Group.po b/sr-Latn-RS/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/sr-Latn-RS/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/sr-Latn-RS/Installing_Software.po b/sr-Latn-RS/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/sr-Latn-RS/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/sr-Latn-RS/Revision_History.po b/sr-Latn-RS/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/sr-Latn-RS/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/sr-Latn-RS/antenna-nec2c.po b/sr-Latn-RS/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/sr-Latn-RS/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/antenna-splat.po b/sr-Latn-RS/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/sr-Latn-RS/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/sr-Latn-RS/antenna-xnec2c.po b/sr-Latn-RS/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/sr-Latn-RS/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/sr-Latn-RS/antenna.po b/sr-Latn-RS/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/sr-Latn-RS/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-geda.po b/sr-Latn-RS/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/sr-Latn-RS/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-gerbv.po b/sr-Latn-RS/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/sr-Latn-RS/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-gnucap.po b/sr-Latn-RS/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/sr-Latn-RS/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-gspiceui.po b/sr-Latn-RS/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/sr-Latn-RS/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-iverilog.po b/sr-Latn-RS/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/sr-Latn-RS/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-kicad.po b/sr-Latn-RS/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/sr-Latn-RS/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-ngspice.po b/sr-Latn-RS/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/sr-Latn-RS/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-pcb.po b/sr-Latn-RS/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/sr-Latn-RS/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-qucs.po b/sr-Latn-RS/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/sr-Latn-RS/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit-xcircuit.po b/sr-Latn-RS/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/sr-Latn-RS/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/circuit.po b/sr-Latn-RS/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/sr-Latn-RS/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/logging-LinLog.po b/sr-Latn-RS/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/sr-Latn-RS/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/logging-qle.po b/sr-Latn-RS/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/sr-Latn-RS/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/sr-Latn-RS/logging-xlog.po b/sr-Latn-RS/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/sr-Latn-RS/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/sr-Latn-RS/logging.po b/sr-Latn-RS/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/sr-Latn-RS/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-aldo.po b/sr-Latn-RS/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/sr-Latn-RS/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-cwdaemon.po b/sr-Latn-RS/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/sr-Latn-RS/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-cwirc.po b/sr-Latn-RS/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/sr-Latn-RS/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-demorse.po b/sr-Latn-RS/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/sr-Latn-RS/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-dxcc.po b/sr-Latn-RS/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/sr-Latn-RS/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/sr-Latn-RS/others-echolinux.po b/sr-Latn-RS/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/sr-Latn-RS/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-gpredict.po b/sr-Latn-RS/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/sr-Latn-RS/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/sr-Latn-RS/others-gpsman.po b/sr-Latn-RS/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/sr-Latn-RS/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-gresistor.po b/sr-Latn-RS/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/sr-Latn-RS/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/sr-Latn-RS/others-gridloc.po b/sr-Latn-RS/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/sr-Latn-RS/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-gtkwave.po b/sr-Latn-RS/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/sr-Latn-RS/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-ibp.po b/sr-Latn-RS/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/sr-Latn-RS/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-morse2txt.po b/sr-Latn-RS/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/sr-Latn-RS/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-ssbd.po b/sr-Latn-RS/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/sr-Latn-RS/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-svxlink.po b/sr-Latn-RS/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/sr-Latn-RS/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-thebridge.po b/sr-Latn-RS/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/sr-Latn-RS/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-tqsllib.po b/sr-Latn-RS/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/sr-Latn-RS/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-trustedqsl.po b/sr-Latn-RS/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/sr-Latn-RS/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-unixcw.po b/sr-Latn-RS/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/sr-Latn-RS/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-wxapt.po b/sr-Latn-RS/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/sr-Latn-RS/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-xgridloc.po b/sr-Latn-RS/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/sr-Latn-RS/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/sr-Latn-RS/others-xwota.po b/sr-Latn-RS/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/sr-Latn-RS/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/sr-Latn-RS/others-xwxapt.po b/sr-Latn-RS/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/sr-Latn-RS/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/others.po b/sr-Latn-RS/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/sr-Latn-RS/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-aprsd.po b/sr-Latn-RS/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/sr-Latn-RS/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-ax25-apps.po b/sr-Latn-RS/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/sr-Latn-RS/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-ax25-tools.po b/sr-Latn-RS/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/sr-Latn-RS/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-colordx.po b/sr-Latn-RS/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/sr-Latn-RS/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-libax25.po b/sr-Latn-RS/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/sr-Latn-RS/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-node.po b/sr-Latn-RS/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/sr-Latn-RS/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-xastir.po b/sr-Latn-RS/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/sr-Latn-RS/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-xconvers.po b/sr-Latn-RS/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/sr-Latn-RS/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/sr-Latn-RS/packet-xdx.po b/sr-Latn-RS/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/sr-Latn-RS/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/sr-Latn-RS/packet.po b/sr-Latn-RS/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/sr-Latn-RS/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/rig-grig.po b/sr-Latn-RS/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/sr-Latn-RS/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/sr-Latn-RS/rig-hamlib.po b/sr-Latn-RS/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/sr-Latn-RS/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/rig.po b/sr-Latn-RS/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/sr-Latn-RS/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/sr-Latn-RS/sdr-gnuradio.po b/sr-Latn-RS/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/sr-Latn-RS/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/sdr.po b/sr-Latn-RS/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/sr-Latn-RS/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-fldigi.po b/sr-Latn-RS/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/sr-Latn-RS/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-gmfsk.po b/sr-Latn-RS/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/sr-Latn-RS/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-gpsk31.po b/sr-Latn-RS/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/sr-Latn-RS/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-linpsk.po b/sr-Latn-RS/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/sr-Latn-RS/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-lpsk31.po b/sr-Latn-RS/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/sr-Latn-RS/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-qsstv.po b/sr-Latn-RS/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/sr-Latn-RS/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-xfhell.po b/sr-Latn-RS/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/sr-Latn-RS/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard-xpsk31.po b/sr-Latn-RS/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/sr-Latn-RS/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/sr-Latn-RS/soundcard.po b/sr-Latn-RS/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/sr-Latn-RS/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/sr-RS/Amateur_Radio_Guide.po b/sr-RS/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/sr-RS/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/sr-RS/Article_Info.po b/sr-RS/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/sr-RS/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/sr-RS/Author_Group.po b/sr-RS/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/sr-RS/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/sr-RS/Installing_Software.po b/sr-RS/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/sr-RS/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/sr-RS/Revision_History.po b/sr-RS/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/sr-RS/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/sr-RS/antenna-nec2c.po b/sr-RS/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/sr-RS/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/antenna-splat.po b/sr-RS/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/sr-RS/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/sr-RS/antenna-xnec2c.po b/sr-RS/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/sr-RS/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/sr-RS/antenna.po b/sr-RS/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/sr-RS/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-geda.po b/sr-RS/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/sr-RS/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/sr-RS/circuit-gerbv.po b/sr-RS/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/sr-RS/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/sr-RS/circuit-gnucap.po b/sr-RS/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/sr-RS/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-gspiceui.po b/sr-RS/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/sr-RS/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/sr-RS/circuit-iverilog.po b/sr-RS/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/sr-RS/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-kicad.po b/sr-RS/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/sr-RS/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-ngspice.po b/sr-RS/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/sr-RS/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-pcb.po b/sr-RS/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/sr-RS/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/sr-RS/circuit-qucs.po b/sr-RS/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/sr-RS/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit-xcircuit.po b/sr-RS/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/sr-RS/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/circuit.po b/sr-RS/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/sr-RS/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/logging-LinLog.po b/sr-RS/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/sr-RS/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/logging-qle.po b/sr-RS/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/sr-RS/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/sr-RS/logging-xlog.po b/sr-RS/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/sr-RS/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/sr-RS/logging.po b/sr-RS/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/sr-RS/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-aldo.po b/sr-RS/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/sr-RS/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-cwdaemon.po b/sr-RS/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/sr-RS/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-cwirc.po b/sr-RS/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/sr-RS/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/sr-RS/others-demorse.po b/sr-RS/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/sr-RS/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-dxcc.po b/sr-RS/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/sr-RS/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/sr-RS/others-echolinux.po b/sr-RS/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/sr-RS/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-gpredict.po b/sr-RS/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/sr-RS/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/sr-RS/others-gpsman.po b/sr-RS/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/sr-RS/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-gresistor.po b/sr-RS/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/sr-RS/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/sr-RS/others-gridloc.po b/sr-RS/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/sr-RS/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-gtkwave.po b/sr-RS/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/sr-RS/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-ibp.po b/sr-RS/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/sr-RS/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/sr-RS/others-morse2txt.po b/sr-RS/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/sr-RS/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-ssbd.po b/sr-RS/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/sr-RS/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-svxlink.po b/sr-RS/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/sr-RS/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-thebridge.po b/sr-RS/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/sr-RS/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-tqsllib.po b/sr-RS/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/sr-RS/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-trustedqsl.po b/sr-RS/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/sr-RS/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-unixcw.po b/sr-RS/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/sr-RS/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-wxapt.po b/sr-RS/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/sr-RS/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others-xgridloc.po b/sr-RS/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/sr-RS/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/sr-RS/others-xwota.po b/sr-RS/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/sr-RS/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/sr-RS/others-xwxapt.po b/sr-RS/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/sr-RS/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/others.po b/sr-RS/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/sr-RS/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-aprsd.po b/sr-RS/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/sr-RS/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-ax25-apps.po b/sr-RS/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/sr-RS/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-ax25-tools.po b/sr-RS/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/sr-RS/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-colordx.po b/sr-RS/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/sr-RS/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/sr-RS/packet-libax25.po b/sr-RS/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/sr-RS/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-node.po b/sr-RS/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/sr-RS/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/packet-xastir.po b/sr-RS/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/sr-RS/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/sr-RS/packet-xconvers.po b/sr-RS/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/sr-RS/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/sr-RS/packet-xdx.po b/sr-RS/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/sr-RS/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/sr-RS/packet.po b/sr-RS/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/sr-RS/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/rig-grig.po b/sr-RS/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/sr-RS/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/sr-RS/rig-hamlib.po b/sr-RS/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/sr-RS/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/rig.po b/sr-RS/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/sr-RS/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/sr-RS/sdr-gnuradio.po b/sr-RS/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/sr-RS/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/sdr.po b/sr-RS/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/sr-RS/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sr-RS/soundcard-fldigi.po b/sr-RS/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/sr-RS/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/sr-RS/soundcard-gmfsk.po b/sr-RS/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/sr-RS/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-gpsk31.po b/sr-RS/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/sr-RS/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-linpsk.po b/sr-RS/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/sr-RS/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-lpsk31.po b/sr-RS/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/sr-RS/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-qsstv.po b/sr-RS/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/sr-RS/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-xfhell.po b/sr-RS/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/sr-RS/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard-xpsk31.po b/sr-RS/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/sr-RS/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/sr-RS/soundcard.po b/sr-RS/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/sr-RS/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/sv-SE/Amateur_Radio_Guide.po b/sv-SE/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/sv-SE/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/sv-SE/Article_Info.po b/sv-SE/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/sv-SE/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/sv-SE/Author_Group.po b/sv-SE/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/sv-SE/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/sv-SE/Installing_Software.po b/sv-SE/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/sv-SE/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/sv-SE/Revision_History.po b/sv-SE/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/sv-SE/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/sv-SE/antenna-nec2c.po b/sv-SE/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/sv-SE/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/antenna-splat.po b/sv-SE/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/sv-SE/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/sv-SE/antenna-xnec2c.po b/sv-SE/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/sv-SE/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/sv-SE/antenna.po b/sv-SE/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/sv-SE/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-geda.po b/sv-SE/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/sv-SE/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/sv-SE/circuit-gerbv.po b/sv-SE/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/sv-SE/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/sv-SE/circuit-gnucap.po b/sv-SE/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/sv-SE/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-gspiceui.po b/sv-SE/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/sv-SE/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/sv-SE/circuit-iverilog.po b/sv-SE/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/sv-SE/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-kicad.po b/sv-SE/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/sv-SE/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-ngspice.po b/sv-SE/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/sv-SE/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-pcb.po b/sv-SE/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/sv-SE/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/sv-SE/circuit-qucs.po b/sv-SE/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/sv-SE/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit-xcircuit.po b/sv-SE/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/sv-SE/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/circuit.po b/sv-SE/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/sv-SE/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/logging-LinLog.po b/sv-SE/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/sv-SE/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/logging-qle.po b/sv-SE/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/sv-SE/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/sv-SE/logging-xlog.po b/sv-SE/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/sv-SE/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/sv-SE/logging.po b/sv-SE/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/sv-SE/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-aldo.po b/sv-SE/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/sv-SE/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-cwdaemon.po b/sv-SE/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/sv-SE/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-cwirc.po b/sv-SE/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/sv-SE/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/sv-SE/others-demorse.po b/sv-SE/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/sv-SE/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-dxcc.po b/sv-SE/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/sv-SE/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/sv-SE/others-echolinux.po b/sv-SE/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/sv-SE/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-gpredict.po b/sv-SE/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/sv-SE/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/sv-SE/others-gpsman.po b/sv-SE/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/sv-SE/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-gresistor.po b/sv-SE/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/sv-SE/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/sv-SE/others-gridloc.po b/sv-SE/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/sv-SE/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-gtkwave.po b/sv-SE/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/sv-SE/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-ibp.po b/sv-SE/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/sv-SE/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/sv-SE/others-morse2txt.po b/sv-SE/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/sv-SE/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-ssbd.po b/sv-SE/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/sv-SE/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-svxlink.po b/sv-SE/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/sv-SE/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-thebridge.po b/sv-SE/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/sv-SE/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-tqsllib.po b/sv-SE/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/sv-SE/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-trustedqsl.po b/sv-SE/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/sv-SE/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-unixcw.po b/sv-SE/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/sv-SE/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-wxapt.po b/sv-SE/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/sv-SE/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others-xgridloc.po b/sv-SE/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/sv-SE/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/sv-SE/others-xwota.po b/sv-SE/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/sv-SE/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/sv-SE/others-xwxapt.po b/sv-SE/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/sv-SE/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/others.po b/sv-SE/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/sv-SE/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-aprsd.po b/sv-SE/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/sv-SE/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-ax25-apps.po b/sv-SE/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/sv-SE/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-ax25-tools.po b/sv-SE/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/sv-SE/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-colordx.po b/sv-SE/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/sv-SE/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/sv-SE/packet-libax25.po b/sv-SE/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/sv-SE/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-node.po b/sv-SE/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/sv-SE/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/packet-xastir.po b/sv-SE/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/sv-SE/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/sv-SE/packet-xconvers.po b/sv-SE/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/sv-SE/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/sv-SE/packet-xdx.po b/sv-SE/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/sv-SE/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/sv-SE/packet.po b/sv-SE/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/sv-SE/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/rig-grig.po b/sv-SE/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/sv-SE/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/sv-SE/rig-hamlib.po b/sv-SE/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/sv-SE/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/rig.po b/sv-SE/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/sv-SE/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/sv-SE/sdr-gnuradio.po b/sv-SE/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/sv-SE/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/sdr.po b/sv-SE/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/sv-SE/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/sv-SE/soundcard-fldigi.po b/sv-SE/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/sv-SE/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/sv-SE/soundcard-gmfsk.po b/sv-SE/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/sv-SE/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-gpsk31.po b/sv-SE/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/sv-SE/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-linpsk.po b/sv-SE/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/sv-SE/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-lpsk31.po b/sv-SE/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/sv-SE/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-qsstv.po b/sv-SE/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/sv-SE/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-xfhell.po b/sv-SE/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/sv-SE/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard-xpsk31.po b/sv-SE/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/sv-SE/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/sv-SE/soundcard.po b/sv-SE/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/sv-SE/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/uk-UA/Amateur_Radio_Guide.po b/uk-UA/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/uk-UA/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/uk-UA/Article_Info.po b/uk-UA/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/uk-UA/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/uk-UA/Author_Group.po b/uk-UA/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/uk-UA/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/uk-UA/Installing_Software.po b/uk-UA/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/uk-UA/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/uk-UA/Revision_History.po b/uk-UA/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/uk-UA/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/uk-UA/antenna-nec2c.po b/uk-UA/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/uk-UA/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/antenna-splat.po b/uk-UA/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/uk-UA/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/uk-UA/antenna-xnec2c.po b/uk-UA/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/uk-UA/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/uk-UA/antenna.po b/uk-UA/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/uk-UA/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-geda.po b/uk-UA/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/uk-UA/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/uk-UA/circuit-gerbv.po b/uk-UA/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/uk-UA/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/uk-UA/circuit-gnucap.po b/uk-UA/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/uk-UA/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-gspiceui.po b/uk-UA/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/uk-UA/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/uk-UA/circuit-iverilog.po b/uk-UA/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/uk-UA/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-kicad.po b/uk-UA/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/uk-UA/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-ngspice.po b/uk-UA/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/uk-UA/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-pcb.po b/uk-UA/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/uk-UA/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/uk-UA/circuit-qucs.po b/uk-UA/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/uk-UA/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit-xcircuit.po b/uk-UA/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/uk-UA/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/circuit.po b/uk-UA/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/uk-UA/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/logging-LinLog.po b/uk-UA/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/uk-UA/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/logging-qle.po b/uk-UA/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/uk-UA/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/uk-UA/logging-xlog.po b/uk-UA/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/uk-UA/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/uk-UA/logging.po b/uk-UA/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/uk-UA/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-aldo.po b/uk-UA/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/uk-UA/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-cwdaemon.po b/uk-UA/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/uk-UA/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-cwirc.po b/uk-UA/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/uk-UA/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/uk-UA/others-demorse.po b/uk-UA/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/uk-UA/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-dxcc.po b/uk-UA/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/uk-UA/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/uk-UA/others-echolinux.po b/uk-UA/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/uk-UA/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-gpredict.po b/uk-UA/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/uk-UA/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/uk-UA/others-gpsman.po b/uk-UA/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/uk-UA/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-gresistor.po b/uk-UA/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/uk-UA/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/uk-UA/others-gridloc.po b/uk-UA/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/uk-UA/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-gtkwave.po b/uk-UA/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/uk-UA/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-ibp.po b/uk-UA/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/uk-UA/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/uk-UA/others-morse2txt.po b/uk-UA/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/uk-UA/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-ssbd.po b/uk-UA/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/uk-UA/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-svxlink.po b/uk-UA/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/uk-UA/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-thebridge.po b/uk-UA/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/uk-UA/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-tqsllib.po b/uk-UA/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/uk-UA/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-trustedqsl.po b/uk-UA/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/uk-UA/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-unixcw.po b/uk-UA/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/uk-UA/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-wxapt.po b/uk-UA/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/uk-UA/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others-xgridloc.po b/uk-UA/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/uk-UA/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/uk-UA/others-xwota.po b/uk-UA/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/uk-UA/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/uk-UA/others-xwxapt.po b/uk-UA/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/uk-UA/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/others.po b/uk-UA/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/uk-UA/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-aprsd.po b/uk-UA/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/uk-UA/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-ax25-apps.po b/uk-UA/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/uk-UA/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-ax25-tools.po b/uk-UA/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/uk-UA/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-colordx.po b/uk-UA/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/uk-UA/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/uk-UA/packet-libax25.po b/uk-UA/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/uk-UA/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-node.po b/uk-UA/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/uk-UA/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/packet-xastir.po b/uk-UA/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/uk-UA/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/uk-UA/packet-xconvers.po b/uk-UA/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/uk-UA/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/uk-UA/packet-xdx.po b/uk-UA/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/uk-UA/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/uk-UA/packet.po b/uk-UA/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/uk-UA/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/rig-grig.po b/uk-UA/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/uk-UA/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/uk-UA/rig-hamlib.po b/uk-UA/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/uk-UA/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/rig.po b/uk-UA/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/uk-UA/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/uk-UA/sdr-gnuradio.po b/uk-UA/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/uk-UA/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/sdr.po b/uk-UA/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/uk-UA/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/uk-UA/soundcard-fldigi.po b/uk-UA/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/uk-UA/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/uk-UA/soundcard-gmfsk.po b/uk-UA/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/uk-UA/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-gpsk31.po b/uk-UA/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/uk-UA/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-linpsk.po b/uk-UA/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/uk-UA/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-lpsk31.po b/uk-UA/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/uk-UA/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-qsstv.po b/uk-UA/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/uk-UA/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-xfhell.po b/uk-UA/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/uk-UA/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard-xpsk31.po b/uk-UA/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/uk-UA/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/uk-UA/soundcard.po b/uk-UA/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/uk-UA/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/zh-CN/Amateur_Radio_Guide.po b/zh-CN/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/zh-CN/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/zh-CN/Article_Info.po b/zh-CN/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/zh-CN/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/zh-CN/Author_Group.po b/zh-CN/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/zh-CN/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/zh-CN/Installing_Software.po b/zh-CN/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/zh-CN/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/zh-CN/Revision_History.po b/zh-CN/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/zh-CN/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/zh-CN/antenna-nec2c.po b/zh-CN/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/zh-CN/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/antenna-splat.po b/zh-CN/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/zh-CN/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/zh-CN/antenna-xnec2c.po b/zh-CN/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/zh-CN/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/zh-CN/antenna.po b/zh-CN/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/zh-CN/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-geda.po b/zh-CN/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/zh-CN/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/zh-CN/circuit-gerbv.po b/zh-CN/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/zh-CN/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/zh-CN/circuit-gnucap.po b/zh-CN/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/zh-CN/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-gspiceui.po b/zh-CN/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/zh-CN/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/zh-CN/circuit-iverilog.po b/zh-CN/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/zh-CN/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-kicad.po b/zh-CN/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/zh-CN/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-ngspice.po b/zh-CN/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/zh-CN/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-pcb.po b/zh-CN/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/zh-CN/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/zh-CN/circuit-qucs.po b/zh-CN/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/zh-CN/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit-xcircuit.po b/zh-CN/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/zh-CN/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/circuit.po b/zh-CN/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/zh-CN/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/logging-LinLog.po b/zh-CN/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/zh-CN/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/logging-qle.po b/zh-CN/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/zh-CN/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/zh-CN/logging-xlog.po b/zh-CN/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/zh-CN/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/zh-CN/logging.po b/zh-CN/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/zh-CN/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-aldo.po b/zh-CN/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/zh-CN/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-cwdaemon.po b/zh-CN/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/zh-CN/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-cwirc.po b/zh-CN/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/zh-CN/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/zh-CN/others-demorse.po b/zh-CN/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/zh-CN/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-dxcc.po b/zh-CN/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/zh-CN/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/zh-CN/others-echolinux.po b/zh-CN/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/zh-CN/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-gpredict.po b/zh-CN/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/zh-CN/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/zh-CN/others-gpsman.po b/zh-CN/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/zh-CN/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-gresistor.po b/zh-CN/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/zh-CN/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/zh-CN/others-gridloc.po b/zh-CN/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/zh-CN/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-gtkwave.po b/zh-CN/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/zh-CN/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-ibp.po b/zh-CN/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/zh-CN/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/zh-CN/others-morse2txt.po b/zh-CN/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/zh-CN/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-ssbd.po b/zh-CN/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/zh-CN/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-svxlink.po b/zh-CN/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/zh-CN/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-thebridge.po b/zh-CN/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/zh-CN/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-tqsllib.po b/zh-CN/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/zh-CN/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-trustedqsl.po b/zh-CN/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/zh-CN/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-unixcw.po b/zh-CN/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/zh-CN/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-wxapt.po b/zh-CN/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/zh-CN/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others-xgridloc.po b/zh-CN/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/zh-CN/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/zh-CN/others-xwota.po b/zh-CN/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/zh-CN/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/zh-CN/others-xwxapt.po b/zh-CN/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/zh-CN/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/others.po b/zh-CN/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/zh-CN/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-aprsd.po b/zh-CN/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/zh-CN/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-ax25-apps.po b/zh-CN/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/zh-CN/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-ax25-tools.po b/zh-CN/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/zh-CN/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-colordx.po b/zh-CN/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/zh-CN/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/zh-CN/packet-libax25.po b/zh-CN/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/zh-CN/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-node.po b/zh-CN/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/zh-CN/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/packet-xastir.po b/zh-CN/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/zh-CN/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/zh-CN/packet-xconvers.po b/zh-CN/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/zh-CN/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/zh-CN/packet-xdx.po b/zh-CN/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/zh-CN/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/zh-CN/packet.po b/zh-CN/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/zh-CN/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/rig-grig.po b/zh-CN/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/zh-CN/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/zh-CN/rig-hamlib.po b/zh-CN/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/zh-CN/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/rig.po b/zh-CN/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/zh-CN/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/zh-CN/sdr-gnuradio.po b/zh-CN/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/zh-CN/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/sdr.po b/zh-CN/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/zh-CN/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-CN/soundcard-fldigi.po b/zh-CN/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/zh-CN/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/zh-CN/soundcard-gmfsk.po b/zh-CN/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/zh-CN/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-gpsk31.po b/zh-CN/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/zh-CN/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-linpsk.po b/zh-CN/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/zh-CN/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-lpsk31.po b/zh-CN/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/zh-CN/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-qsstv.po b/zh-CN/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/zh-CN/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-xfhell.po b/zh-CN/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/zh-CN/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard-xpsk31.po b/zh-CN/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/zh-CN/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/zh-CN/soundcard.po b/zh-CN/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/zh-CN/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
diff --git a/zh-TW/Amateur_Radio_Guide.po b/zh-TW/Amateur_Radio_Guide.po
new file mode 100644
index 0000000..ebd49f6
--- /dev/null
+++ b/zh-TW/Amateur_Radio_Guide.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Introduction"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Fedora Amateur Radio Guide is still a work in progress and does not represent all packages that are available within the Fedora repositories."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Amateur radio and Linux go hand-in-hand. Both allow users to experiment to the extent of their knowledge and to learn more along the way. With new digital technologies being used everyday open source software is the best way to stay cutting edge in this ever-changing hobby."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora has packaged dozens of software to make it easy for Fedora users to obtain and setup. Within seconds any user will be able to have the tools they to enhance their amateur radio experience."
+msgstr ""
+
diff --git a/zh-TW/Article_Info.po b/zh-TW/Article_Info.po
new file mode 100644
index 0000000..d1e02d4
--- /dev/null
+++ b/zh-TW/Article_Info.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Amateur Radio Guide"
+msgstr ""
+
+#. Tag: subtitle
+#, no-c-format
+msgid "A guide for users of Fedora amateur radio software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fedora includes a wide range of applications relevant to amateur radio operators. This guide describes the use of some of those applications"
+msgstr ""
+
diff --git a/zh-TW/Author_Group.po b/zh-TW/Author_Group.po
new file mode 100644
index 0000000..4fa5501
--- /dev/null
+++ b/zh-TW/Author_Group.po
@@ -0,0 +1,19 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: surname
+#, no-c-format
+msgid "The Fedora Documentation Project"
+msgstr ""
+
diff --git a/zh-TW/Installing_Software.po b/zh-TW/Installing_Software.po
new file mode 100644
index 0000000..92b12cc
--- /dev/null
+++ b/zh-TW/Installing_Software.po
@@ -0,0 +1,311 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:58\n"
+"PO-Revision-Date: 2010-10-13T13:16:58\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software on Fedora"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are basically two ways to install software from the Fedora repositories; from the GUI using <package>PackageKit</package> and from the command line using <package>yum</package>. Because the <package>yum</package> approach is simpler, throughout this document we describe that method. However, there are a number of details with respect to <package>yum</package> that are useful to know, and some users feel more comfortable with a graphical user interface. Hence, this appendix."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with the GUI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Launch the <package>PackageKit</package> application by selecting <guimenu>Administration->Add/Remove Software</guimenu> from the <guimenu>System</guimenu> menu:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Launching PackageKit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There may be a delay before the controls on the window that appears may be used. This delay may be brief or lengthy, depending on what you have done earlier. The data used by PackageKit is cached, and if it is stale, new data will be downloaded, which may take several minutes."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Type in the name of the package you wish to install in the text box at the upper left, and select the <guilabel>Find</guilabel> button. There may be a delay, and you may need to click the <guilabel>Find</guilabel> button a second time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package (perhaps with several others) will appear to the right. The closed box indicates that the package is not installed on your system."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching for Software"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click on the check box next to the package you wish to install. A blue plus sign will appear over the box indicating that is has been selected to install."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Selecting a package to install"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may repeat the process if you wish to install additional packages. When you have selected the packages you wish, click the <guilabel>Apply</guilabel> button at the lower right to install the packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Depending on how your system has been configured, you may be prompted to enter the password for the administrative user. If the package is unsigned, or is from a repository you have not used before, you may be prompted for this password again. As a general rule, only administrators may install software."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Authorizing the installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Authorizing the Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Enter the root password and click <guilabel>Authenticate</guilabel>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The package will then be installed. When the installation is complete, the package wll be shown as an open box, indicating that the package is installed. For some applications, the application's icon may be displayed instead of the open box. The <guilabel>Apply</guilabel> button will be disabled, indicating that there are no pending actions to apply."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Package is installed"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guilabel>Find</guilabel> button searches not only the name of the package, but also the package description. Some common words may reveal several packages, some perhaps not those intended. For example, if you typed in \"circuit\" with the intent of finding circuit design applications, you may also find applications referring to wired communications circuits as well as racing circuits!"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Sometimes you may want to try several variations of a word or phrase. If, for example, you are looking for an SSTV application, trying \"slowscan\" or \"slow scan\" will fail:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - failure"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The developer of the slow scan application used the word \"slow-scan\" in his description. <package>PackageKit</package> is not smart enough to guess what you meant or what the original developer was thinking."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Searching the description - success"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing Software with yum"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unlike PackageKit, where the system administrator may choose to allow non-administrative users to install software, yum requires administrator authentication. There are three ways this can be done:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may switch to the root user with the <command>su</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su -\n"
+"Password: \n"
+"[root at Cimbaoth ~]# yum install xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This is the least desireable method. You must enter the root password, and you can easily forget that you are operating as root. As the root user you can do unlimited damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may use the <command>su</command> command with the <command>-c</command> switch. This allows you to enter the single <command>yum</command> command as root, but immediately switches back to your normal user:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ su - 'yum install fldigi'\n"
+"Password: \n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that you must surround the command with quotation marks or apostrophes. This still requires you to type the password, and is somewhat more annoying to type, but does not leave you as root ready to do damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the adminstrator has set you up in the <filename>sudoers</filename> file, you may use the <command>sudo</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install wxapt\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+" ...\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This has several advantages; you don't need to type the password, you are not left in a dangerous position, and if desired, the administrator can limit you to a select set of commands so you do not inadvertently cause damage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Because this is the preferred approach, the examples in this guide use this method. However, it does require setup ahead of time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> may determine that additional packages must be installed. <command>yum</command> will list these packages and calculate the total size of the download. It will then ask you whether you want to actually download and install this package or group of packages:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ sudo yum install trustedqsl\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Setting up Install Process\n"
+"Resolving Dependencies\n"
+"--> Running transaction check\n"
+"---> Package trustedqsl.i386 0:1.11-3.fc10 set to be updated\n"
+"--> Processing Dependency: tqsllib >= 1.2 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Processing Dependency: libtqsllib.so.1 for package: trustedqsl-1.11-3.fc10.i386\n"
+"--> Running transaction check\n"
+"---> Package tqsllib.i386 0:2.0-5.fc10 set to be updated\n"
+"--> Finished Dependency Resolution\n"
+"\n"
+"Dependencies Resolved\n"
+"\n"
+"================================================================================\n"
+" Package Arch Version Repository Size\n"
+"================================================================================\n"
+"Installing:\n"
+" trustedqsl i386 1.11-3.fc10 updates 557 k\n"
+"Installing for dependencies:\n"
+" tqsllib i386 2.0-5.fc10 updates 167 k\n"
+"\n"
+"Transaction Summary\n"
+"================================================================================\n"
+"Install 2 Package(s) \n"
+"Update 0 Package(s) \n"
+"Remove 0 Package(s) \n"
+"\n"
+"Total download size: 723 k\n"
+"Is this ok [y/N]: \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Answer <command>y</command> or <command>N</command> depending on whether you want to download and install the group of packages."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> gives you a number of choices for locating software you desire. To find information about a package you do not need to provide credentials. Any user may look up information about a package. You may search for specific words in the description using <command>yum search</command>:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum search APRS\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"================================ Matched: APRS =================================\n"
+"aprsd.i386 : Internet gateway and client access to amateur radio APRS packet\n"
+" : data\n"
+"xastir.i386 : Amateur Station Tracking and Reporting system for amateur radio\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>yum</command> will return the names of any package with the specified phrase in its description, and a short description. You may get a more detailed description of the package with the <command>yum info</command> command:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Cimbaoth ~]$ yum info xastir\n"
+"Loaded plugins: presto, refresh-packagekit\n"
+"Setting up and reading Presto delta metadata\n"
+"Installed Packages\n"
+"Name : xastir\n"
+"Arch : i386\n"
+"Version : 1.9.4\n"
+"Release : 5.fc10\n"
+"Size : 4.0 M\n"
+"Repo : installed\n"
+"Summary : Amateur Station Tracking and Reporting system for amateur radio\n"
+"URL : http://www.xastir.org\n"
+"License : GPLv2+\n"
+"Description: Xastir is a graphical application that interfaces HAM radio\n"
+" : and internet access to realtime mapping software.\n"
+" : \n"
+" : Install XASTIR if you are interested in APRS(tm) and HAM radio\n"
+" : software.\n"
+"\n"
+"[jjmcd at Cimbaoth ~]$ \n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notice that <command>yum</command> also tells you whether the package is installed. Yum also gives you the address of the upstream website so you may learn more about the package before installing it."
+msgstr ""
+
diff --git a/zh-TW/Revision_History.po b/zh-TW/Revision_History.po
new file mode 100644
index 0000000..7b2f2c6
--- /dev/null
+++ b/zh-TW/Revision_History.po
@@ -0,0 +1,104 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Revision History"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Eric"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Christensen"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Commented out unfinished text."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added Introduction paragraphs."
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "John"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "McDonough"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Installing Software appendix"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Added xlog installation and setup procedures."
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: firstname
+#, no-c-format
+msgid "Randy"
+msgstr ""
+
+#. Tag: surname
+#, no-c-format
+msgid "Berry"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xlog screenshot"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Additional info on fldigi"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Beginning of SPLAT! instructions"
+msgstr ""
+
+#. Tag: member
+#, no-c-format
+msgid "Document skeleton"
+msgstr ""
+
diff --git a/zh-TW/antenna-nec2c.po b/zh-TW/antenna-nec2c.po
new file mode 100644
index 0000000..d8d2798
--- /dev/null
+++ b/zh-TW/antenna-nec2c.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "nec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: nec2c is a translation of the Numerical Electromagnetics Code\n"
+" : (NEC2) from FORTRAN to C.\n"
+" : \n"
+" : Operationally nec2c differs from NEC2 by being a command line\n"
+" : non-interactive program, taking as arguments the input file name\n"
+" : and optionally the output file name.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/antenna-splat.po b/zh-TW/antenna-splat.po
new file mode 100644
index 0000000..367e348
--- /dev/null
+++ b/zh-TW/antenna-splat.po
@@ -0,0 +1,290 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "splat"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> is a Surface Path Length And Terrain analysis application which can perform path loss calculations as well as generate coverage maps. Primarily intended for VHF/UHF, it can help plan repeater coverage or plan emergency communications strategies."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>splat</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install splat'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining Terrain Files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Before it can be useful, <command>splat</command> requires files that describe the terrain around the station to be modelled. First, determine the latitude and longitude of the station. Then download the nine terrain files centered on that latitude and longitude from <ulink type=\"http\" url=\"http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/\">http://e0srp01u.ecs.nasa.gov/srtm/version2/SRTM3/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Unzip the nine files and convert them from <filename>hgt</filename> files to <filename>sdf</filename> with the <command>srtm2sdf</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" srtm2sdf N41W082.hgt\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Do this for each of the nine files. Those files can now be placed in a directory where you wish to store terrain files, or they can be placed in the directory where you wish to work with <command>splat</command>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you will be modelling stations over a wide geographic area, you may wish to download and convert additional files. <command>splat</command> will select those files it requires for a particular calculation."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Obtaining cartographic boundary files"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> will work with just the terrain files. However, for path loss maps, the resulting maps can be more useful if they are marked with political boundaries and names of towns and cities. For the United States, county outlines can be downloaded from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/co2000.html#ascii\">http://www.census.gov/geo/www/cob/co2000.html#ascii</ulink> and 'census designated areas' from <ulink type=\"http\" url=\"http://www.census.gov/geo/www/cob/pl2000.html#ascii\">http://www.census.gov/geo/www/cob/pl2000.html#ascii</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For each of these, there are two files, an <filename>xxyy_d00.dat</filename> and <filename>xxyy_d00a.dat</filename>, where xx is 'co' for county and 'pl' for place, and yy is a state number. A file of place names can be generated from the 'a' file with the <command>citydecoder</command> utility. For example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" citydecoder pl37 >cities.dat\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>cities.dat</filename> file is simply a list of names followed by latitude and longitude. You may edit the file with a text editor to insert additional places which will be marked on the map with a red dot."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using SPLAT!"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>splat</command> can perform calculations for a particular path, or generate a map showing path loss or signal strength over a region. In any case <command>splat</command> needs at least one file identifying the transmitter location. For a specific path, it needs an identical file for the receiver. If you would like signal strength calculations, you will need another file with more details about the transmitter."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The QTH file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You tell <command>splat</command> about a particular station (transmitter or receiver) with a <filename>qth</filename> file. This file has four lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The name of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The latitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The longitude of the station"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The antenna height above ground"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Here is an example <filename>qth</filename> file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" W8KEA-4\n"
+" 43 38 05\n"
+" 84 15 41\n"
+" 124.0\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>qth</filename> file should be named for the station. The name of the file in the above example would be <filename>W8KEA-4.qth</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default, <command>splat</command> uses British units; heights are in feet, distances are in miles. However, invoking <command>splat</command> with the <command>-metric</command> switch will cause it to use metric units."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "The LRP file"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you would like <command>splat</command> to calculate signal strengths, it needs to know a little more about the transmitter. You provide this information in a file whose name matches that of the <filename>qth</filename> file but has an extension of <filename>lrp</filename>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <filename>lrp</filename> file has 9 lines:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Dielectric Constant. If you do not have measured data available, the <command>splat</command> man page has a table that can help you estimate a value."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Earth Conductivity"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Atmospheric Bending Constant"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Frequency"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Radio Climate. This is a code describing the terrain. See the table in the man page"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Polarization"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of situations. This and the following line reflect how the Longley-Rice calculations are to be carried out. In the example below, <command>splat</command> will calculate the maximum path loss experienced 50% of the time in 50% of the situations."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Fraction of time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Effective radiated power - power out less feedline loss times antenna gain"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" 15.000 ; Earth Dielectric Constant (Relative permittivity)\n"
+" 0.005 ; Earth Conductivity (Siemens per meter)\n"
+" 301.000 ; Atmospheric Bending Constant (N-Units)\n"
+" 145.090 ; Frequency in MHz (20 MHz to 20 GHz)\n"
+" 5 ; Radio Climate\n"
+" 1 ; Polarization (0 = Horizontal, 1 = Vertical)\n"
+" 0.50 ; Fraction of situations\n"
+" 0.50 ; Fraction of time\n"
+" 126.00 ; ERP\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may leave out the last line in which case <command>splat</command> will calculate only path loss."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Making a map of coverage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with constrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with constrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Coverage map with unconstrained distance"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Coverage Map with unconstrained distance"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Signal Strength Legend"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Signal strength legend at bottom of map"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Calculating a point-to-point path"
+msgstr ""
+
diff --git a/zh-TW/antenna-xnec2c.po b/zh-TW/antenna-xnec2c.po
new file mode 100644
index 0000000..d427d22
--- /dev/null
+++ b/zh-TW/antenna-xnec2c.po
@@ -0,0 +1,50 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xnec2c is a GUI interactive application that (in its current form)\n"
+" : reads NEC2 input files but presents output data in graphical form,\n"
+" : e.g. as wire frame drawings of the radiation pattern or near E/H\n"
+" : field, graphs of maximum gain, input impedance, vswr etc against\n"
+" : frequency and simple rendering of the antenna structure, including\n"
+" : color code representation of currents or charge densities.\n"
+" : \n"
+" : These results are only calculated and drawn on user demand via\n"
+" : menu items or buttons, e.g. xnec2c is interactive and does not\n"
+" : execute NEC2 \"commands\" in batch style as the original does.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xnec2c - yagi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "xnec2c display of 6 element 20 meter yagi"
+msgstr ""
+
diff --git a/zh-TW/antenna.po b/zh-TW/antenna.po
new file mode 100644
index 0000000..137731d
--- /dev/null
+++ b/zh-TW/antenna.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Antenna and Propagation Modeling"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-geda.po b/zh-TW/circuit-geda.po
new file mode 100644
index 0000000..e11c26f
--- /dev/null
+++ b/zh-TW/circuit-geda.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "geda"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "geda - gschem"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a schematic with gEDA"
+msgstr ""
+
diff --git a/zh-TW/circuit-gerbv.po b/zh-TW/circuit-gerbv.po
new file mode 100644
index 0000000..3e5210b
--- /dev/null
+++ b/zh-TW/circuit-gerbv.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gerbv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Viewing a PCB with gerbv"
+msgstr ""
+
diff --git a/zh-TW/circuit-gnucap.po b/zh-TW/circuit-gnucap.po
new file mode 100644
index 0000000..1a8a8ec
--- /dev/null
+++ b/zh-TW/circuit-gnucap.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnucap"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-gspiceui.po b/zh-TW/circuit-gspiceui.po
new file mode 100644
index 0000000..2970e74
--- /dev/null
+++ b/zh-TW/circuit-gspiceui.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gspiceui"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A simple simulation with gspiceui"
+msgstr ""
+
diff --git a/zh-TW/circuit-iverilog.po b/zh-TW/circuit-iverilog.po
new file mode 100644
index 0000000..91755d7
--- /dev/null
+++ b/zh-TW/circuit-iverilog.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "iverilog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-kicad.po b/zh-TW/circuit-kicad.po
new file mode 100644
index 0000000..e8e4aa9
--- /dev/null
+++ b/zh-TW/circuit-kicad.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "kicad"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-ngspice.po b/zh-TW/circuit-ngspice.po
new file mode 100644
index 0000000..c03ebcc
--- /dev/null
+++ b/zh-TW/circuit-ngspice.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ngspice"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-pcb.po b/zh-TW/circuit-pcb.po
new file mode 100644
index 0000000..9d77b2c
--- /dev/null
+++ b/zh-TW/circuit-pcb.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "pcb"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Drawing a PCB with pcb"
+msgstr ""
+
diff --git a/zh-TW/circuit-qucs.po b/zh-TW/circuit-qucs.po
new file mode 100644
index 0000000..8cfdf9b
--- /dev/null
+++ b/zh-TW/circuit-qucs.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qucs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit-xcircuit.po b/zh-TW/circuit-xcircuit.po
new file mode 100644
index 0000000..4c1b6d7
--- /dev/null
+++ b/zh-TW/circuit-xcircuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xcircuit"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/circuit.po b/zh-TW/circuit.po
new file mode 100644
index 0000000..78c4481
--- /dev/null
+++ b/zh-TW/circuit.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Circuit Design and Simulation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/logging-LinLog.po b/zh-TW/logging-LinLog.po
new file mode 100644
index 0000000..3118683
--- /dev/null
+++ b/zh-TW/logging-LinLog.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "LinLog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinLogBook is a highly configurable amateur radio logbook for\n"
+" : Linux.\n"
+" : \n"
+" : It uses an sql- database to store its data. For the ease of use\n"
+" : sqlite 3 is used but it should be possible to use other databases\n"
+" : like mysql, for instance.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/logging-qle.po b/zh-TW/logging-qle.po
new file mode 100644
index 0000000..0e9e8a1
--- /dev/null
+++ b/zh-TW/logging-qle.po
@@ -0,0 +1,479 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> stands for QSO Logger and Editor. It is a simple yet flexible logging program. <package>qle</package> uses a lightweight <package>sqlite</package> database that can be manipulated using standard tools. The application is easily customized, so you can have the logging program behave the way you want. It also interfaces with <package>hamlib</package>, so information may be automatically retrieved from your rig with the appropriate hardware."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> can be installed with yum like any other package:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install qle\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "However, <package>qle</package> requires some initial setup before it may be used."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configuring qle"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The install process creates a configuration file <filename>/etc/qle/qle.conf</filename> which must be edited. This can be done with your favorite text editor, however, the file is protected against writing by a non-admin user. The file might be edited with something like:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo gedit /etc/qle/qle.conf &\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are two lines that must be changed. At line 63 of the file, you will find the lines:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"debug = 0\n"
+"#\n"
+"myCall = N0CAL\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure that the <code>debug</code> line is set to zero and change the <code>myCall</code> line to reflect your callsign."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second line that must be changed is at line 75 where you will find:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"# Filename of SQLite DB with full path.\n"
+"# This file requires sufficient RW access for the DB to work...\n"
+"#\n"
+"db = foo3.db\n"
+"#\n"
+"# Name of the table that you want to log into.\n"
+"# Is probably case-sensitive:\n"
+"#\n"
+"tableName = mycall\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must change the name of the database to your desired name and location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is set up for a single user system, so all users share the same database. You must place the database in a location where it can be accessed by any users requiring it. If you always log on with the same usercode, you might choose to put it in a hidden subdirectory off your logon directory, for example, <filename>~/.qle</filename>. This is the simplest approach, but in some circumstances, you may prefer a more \"global\" location, for example, <filename>/etc/qle</filename>. In this case, you need to take care to give the file appropriate protections."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For simplicity, we will assume that <package>qle</package> will only ever be run from a single usercode and we will put the database there. Reflect that location and name in <filename>qle.conf</filename>, for example:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"db = /home/usercode/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Note that you cannot use the tilde (<command>~</command>) within the config file, you must enter the entire path."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are many things you may wish to change. For example, at line 101:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"useRig = 1\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you want to use the rig control library, <package>hamlib</package>, which can be a great convenience if you have the appropriate hardware."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At line 225:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"#\n"
+"noCwDaemon = 0\n"
+"#\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "determines whether you wish <package>qle</package> to have the capability of keying the transmitter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To avoid describing <package>hamlib</package> settings and hardware setup, we will assume these are both disabled for now, that is, <code>useRig=0</code> and <code>noCwDaemon=1</code>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "After editing <filename>qle.conf</filename>, you need to create the database. There is a sample database in <filename>/usr/share/qle</filename> so we can copy that to the location we have specified for our database:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"cp /usr/share/qle/foo3.db ~/.qle/qle.sqlite\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This file has some test data which we will delete after some initial testing."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle for the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The first time you run <package>qle</package>, it should be done from the command line in debug mode to be sure you made no errors in the config file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"qle --debug=1\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there were errors editing the configuration file, they will appear in the window from which you started <package>qle</package>. If all went well, this should result in seeing the logging windows with the test data displayed:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running qle the first time"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Initial run"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <package>qle</package> \"Main Window\" shows the QSOs that have been logged so far. It will contain QSOs from the sample database. We will delete those QSOs later."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Main Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The \"Sub-Window\" is actually where the data will be entered for each QSO. Some fields are provided automatically, such as the date and time. These will be a lighter color than the other fields. Each field has a button to the right indicating how that field is to be treated. Fields that have the label <guilabel>CAR</guilabel> will be carried over from QSO to QSO. These can be overwritten, but will initially be filled in with data from the previous QSO. These are things like Mode, Power, etc that tend not to change."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "qle Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Data Entry Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you wish to change the data in a field that has the label <guilabel>LCK</guilabel>, you may simply click on <guilabel>LCK</guilabel> and select another choice from the dropdown. Normally, you might choose <guilabel>--</guilabel>, but if you are contesting, the <guilabel>NR SENT</guilabel> field includes a <guilabel>+1</guilabel> choice.`"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Changing Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Field Attributes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you double-click an existing QSO in the Main Window, an Editing Window will appear, allowing you to make changes to the existing QSO."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Editing an existing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Editing QSO"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "To exit the program, click the <guilabel>Exit Program</guilabel> button at the lower left of the subwindow."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Exit Program Button"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle - Exit Program"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> will ask for confirmation when exiting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Deleting Sample Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Now that you are familiar with the basic operation of <package>qle</package>, you will want to delete the original sample data so the database only contains your QSOs. Since the data is in a <package>sqlite</package> database, we merely need to use some simple commands to do that:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"[jjmcd at Aidan .qle]$ sqlite3 ~/.qle/qle.sqlite\n"
+"SQLite version 3.6.20\n"
+"Enter \".help\" for instructions\n"
+"Enter SQL statements terminated with a \";\"\n"
+"sqlite> DELETE FROM mycall;\n"
+"sqlite> .quit\n"
+"[jjmcd at Aidan .qle]$ \n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are familiar with SQL, you can also use <package>sqlite</package> to make other changes and queries."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You are now ready to begin using <package>qle</package>. By default, <package>qle</package> is available on the <guilabel>Other</guilabel> submenu of the <guilabel>Applications</guilabel> menu."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Menu selection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Menu Selection"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Duplicate Checking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> provides duplicate checking as the call is entered. When the first character is entered, any calls in the log that match are shown in the duplicate window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - first character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking first letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "As additional characters are entered, the list gets shorter:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - second character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking second letter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Dupe Sheet - third character"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Dupe checking third letter"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In addition to the current log, the file <filename>/usr/share/qle/master.scp</filename> contains a list of calls to check. These are shown in a separate SCP window:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "SCP Window"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Like the dupes window, this list gets shorter as you type. Edit <filename>master.scp</filename> to include the calls you want."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Some customizations you probably want"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>qle</package> is highly customizable. In the previous sections, we described a few things that definitely need to be changed. There are quite a few more you probably want to change."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At the bottom of the secondary screen you will notice a bar with some information:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Subwindow Info Bar"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This bar is simply a reminder for some random data you may want to keep handy. You can change the information by editing the lines starting at line 1051 in the configuration file:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"infoString = \"ARCI: 10114\"\n"
+"infoString = \"LOC: EN73vp\"\n"
+"infoString = \"ITU: 8 \"\n"
+"infoString = \"CQZ: 4 \"\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You may find that you want the default field types to be different. For example, suppose you constantly change power and you don't want the previous power to be shown by default. At line 384 of the configuration file is a line for each field with the default type. You can simply change this to make <package>qle</package> start with the type you desire:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"fieldTypes = \"---\" # mypwr\n"
+""
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can even adjust individual colors to make them as appealing (or as horrible) as you prefer:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Colors only a mother could love"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "qle Colors Example"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are literally hundreds of adjustments you can make to tailor your logger to behave exactly the way you want. Just be sure to carefully review the comments in <filename>qle.conf</filename> so you don't get unexpected results."
+msgstr ""
+
diff --git a/zh-TW/logging-xlog.po b/zh-TW/logging-xlog.po
new file mode 100644
index 0000000..f1f3faf
--- /dev/null
+++ b/zh-TW/logging-xlog.po
@@ -0,0 +1,79 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is a wonderful logging program that allows the user to create multiple logs, import and export in various formats, and maintain a count on the various awards such as WAS, WAC, DXCC, WAZ, and IOTA. Future versions will contain code to hook into the ARRL's LoTW."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "sudo yum install xlog"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> may be started from the menu by selecting <guimenu>Applications->Other->xlog</guimenu> or from the command line by typing <command>xlog</command>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xlog"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xlog</package> is extremely easy to get setup. After starting xlog, select <guimenu>Settings->Preferences</guimenu>. This will bring up a preferences box where you can configure most options for <package>xlog</package>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>General</guimenu> tab contains basic information on how the log will be setup including the modes and bands you operate. You can change these at anytime but it is good to go ahead and add or remove the modes and bands you don't operate to simplify the operation of the logging later. You can also enable the clock on the status bar and recording of azimuth and distance when you enter in the location of the station. You can also control out data from external programs, such as gmfsk and ktrack, are handled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Info</guimenu> tab contains information on your station and preference to miles or kilometers and where you want the software to look up a callsign. It is recommended that you enter your callsign and your coordinates into the fields located on this tab so the log can appropriately annotate your callsign where necessary and can provide azimuth and distance to a station upon entry of the state or grid. If you don't know your latitude and longitude you can just enter your grid locator and the software will populate a rough location for your station."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Hamlib</guimenu> tab allows you to setup <package>xlog</package> to read your radio so your log will automatically record the frequency and mode. <package>xlog</package> will also display the S-meter on the status bar for your convinence."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The <guimenu>Logs</guimenu> tab allow you to setup the logs themselves. This includes where to store the logs, which logs to start automatically upon starting <package>xlog</package>, when to save the log, and the font. By default, <package>xlog</package> stores your logs in ~/.xlog. This can be changed by providing the appropriate path. If you have multiple logs you can type in the names of each log separated by a comma in the next field and <package>xlog</package> will load those logs each time using tabs at the top of the main screen. The next field asks if you want <package>xlog</package> to save the log whenever you write a log entry or every x minutes. You can also establish a backup of your logs in a separate directory which you can provide in the backup entry. The last field is used to select the font you would like to use for your logs."
+msgstr ""
+
diff --git a/zh-TW/logging.po b/zh-TW/logging.po
new file mode 100644
index 0000000..b6a7a43
--- /dev/null
+++ b/zh-TW/logging.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Logging and related applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-aldo.po b/zh-TW/others-aldo.po
new file mode 100644
index 0000000..f62d095
--- /dev/null
+++ b/zh-TW/others-aldo.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aldo"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-cwdaemon.po b/zh-TW/others-cwdaemon.po
new file mode 100644
index 0000000..335951c
--- /dev/null
+++ b/zh-TW/others-cwdaemon.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwdaemon"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-cwirc.po b/zh-TW/others-cwirc.po
new file mode 100644
index 0000000..c44331f
--- /dev/null
+++ b/zh-TW/others-cwirc.po
@@ -0,0 +1,61 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "cwirc is an X-Chat plug-in that allows you to send and receive CW (Morse Code) over IRC. May be configured to use the mouse, keyboard or an external keying device (using the serial port) for sending. Operates in a user selectable iambic (electronic) or straight key mode. Active channels include #CW on irc.freenode.net. This program is written by Pierre-Philippe Coupard, F8EJF pcoupard at voo.be <ulink type=\"http\" url=\"http://myspace.voo.be/pcoupard/cwirc/\">http://myspace.voo.be/pcoupard/cwirc/</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This plug-in is loaded with X-Chat and executable by a user button."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installation and setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Installing <command>cwirc</command> is straightforward:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" su -c 'yum install cwirc'\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "cwirc 2.0 screenshot"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A screenshot of CWirc in straight key mode."
+msgstr ""
+
diff --git a/zh-TW/others-demorse.po b/zh-TW/others-demorse.po
new file mode 100644
index 0000000..b449766
--- /dev/null
+++ b/zh-TW/others-demorse.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "demorse"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-dxcc.po b/zh-TW/others-dxcc.po
new file mode 100644
index 0000000..a073466
--- /dev/null
+++ b/zh-TW/others-dxcc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "dxcc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dxcc callsign lookup"
+msgstr ""
+
diff --git a/zh-TW/others-echolinux.po b/zh-TW/others-echolinux.po
new file mode 100644
index 0000000..5f3cbba
--- /dev/null
+++ b/zh-TW/others-echolinux.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "echolinux"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-gpredict.po b/zh-TW/others-gpredict.po
new file mode 100644
index 0000000..6c42ee0
--- /dev/null
+++ b/zh-TW/others-gpredict.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpredict"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "gpredict satellite tracking"
+msgstr ""
+
diff --git a/zh-TW/others-gpsman.po b/zh-TW/others-gpsman.po
new file mode 100644
index 0000000..c83bb93
--- /dev/null
+++ b/zh-TW/others-gpsman.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:16:59\n"
+"PO-Revision-Date: 2010-10-13T13:16:59\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsman"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-gresistor.po b/zh-TW/others-gresistor.po
new file mode 100644
index 0000000..b341ea8
--- /dev/null
+++ b/zh-TW/others-gresistor.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gresistor"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Decode resistor color bands"
+msgstr ""
+
diff --git a/zh-TW/others-gridloc.po b/zh-TW/others-gridloc.po
new file mode 100644
index 0000000..69f7328
--- /dev/null
+++ b/zh-TW/others-gridloc.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-gtkwave.po b/zh-TW/others-gtkwave.po
new file mode 100644
index 0000000..1e3e459
--- /dev/null
+++ b/zh-TW/others-gtkwave.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gtkwave"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-ibp.po b/zh-TW/others-ibp.po
new file mode 100644
index 0000000..1762fcb
--- /dev/null
+++ b/zh-TW/others-ibp.po
@@ -0,0 +1,136 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is a simple application that shows beacons which are part of the International Beacon Project. A number of beacons around the world transmit at predetermined times. The <package>ibp</package> application shows you which beacons are currently transmitting."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> is simply installed like most applications:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"sudo yum install ibp\n"
+" "
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "No additional configuration is required, however, <package>ibp</package> expects that the time on the system is correct. Synchronizing your system with one of the many timeservers is recommended."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Starting ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>ibp</package> may be started from the menu by selecting <guimenu>Applications->Other->ibp</guimenu> or from the command line by typing <command>ibp</command>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When <package>ibp</package> is started, by default, two windows will open. The first is a simple text screen showing a list of beacons with the currently transmitting beacons highlighted:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - text screen"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The second window shows a map of the world with a colored dot for each transmitting beacon:"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ibp - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "International Beacon Project - map"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are a number of arguments you may specify to affect how ibp behaves when it is started from the command line:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-c</parameter>, <parameter>--nocolor</parameter> - causes the text window to be displayed only in monochrome. The graph window is still in color."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-m</parameter>, <parameter>--morse</parameter> - In single beacon mode, causes the callsign of the transmitting beacon to be displayed at the bottom of the text window in Morse."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<parameter>-x</parameter>, <parameter>--nograph</parameter> - Don't display the map window."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Running ibp"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "While <package>ibp</package> is running, the highlighted lines on the text display and the dots on the map will periodically change as different beacons take on the transmitting task."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "There are several commands you can enter into the text screen to affect the behavior of <package>ibp</package>:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "digits <command>1</command> through <command>5</command> - causes only one band to be displayed. Since one is normally only monitoring a single band at a time this can lead to faster identification of the beacon of interest. This is also useful for visually challenged operators."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>M</command> - toggles between single band and multi band mode. If a single band was displayed, typing <command>M</command> will cause all five bands to be displayed. If five bands were displayed, the previously selected single band will be displayed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<command>Q</command> - causes <package>ibp</package> to exit."
+msgstr ""
+
diff --git a/zh-TW/others-morse2txt.po b/zh-TW/others-morse2txt.po
new file mode 100644
index 0000000..4187dcd
--- /dev/null
+++ b/zh-TW/others-morse2txt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "morse2txt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-ssbd.po b/zh-TW/others-ssbd.po
new file mode 100644
index 0000000..9751e17
--- /dev/null
+++ b/zh-TW/others-ssbd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ssbd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-svxlink.po b/zh-TW/others-svxlink.po
new file mode 100644
index 0000000..52cda6b
--- /dev/null
+++ b/zh-TW/others-svxlink.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "svxlink"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-thebridge.po b/zh-TW/others-thebridge.po
new file mode 100644
index 0000000..47c307d
--- /dev/null
+++ b/zh-TW/others-thebridge.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "thebridge"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-tqsllib.po b/zh-TW/others-tqsllib.po
new file mode 100644
index 0000000..280a4dc
--- /dev/null
+++ b/zh-TW/others-tqsllib.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "tqsllib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-trustedqsl.po b/zh-TW/others-trustedqsl.po
new file mode 100644
index 0000000..18cef59
--- /dev/null
+++ b/zh-TW/others-trustedqsl.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "trustedqsl"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-unixcw.po b/zh-TW/others-unixcw.po
new file mode 100644
index 0000000..d0f1db9
--- /dev/null
+++ b/zh-TW/others-unixcw.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "unixcw"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-wxapt.po b/zh-TW/others-wxapt.po
new file mode 100644
index 0000000..e2ad456
--- /dev/null
+++ b/zh-TW/others-wxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "wxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others-xgridloc.po b/zh-TW/others-xgridloc.po
new file mode 100644
index 0000000..ecba962
--- /dev/null
+++ b/zh-TW/others-xgridloc.po
@@ -0,0 +1,99 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is an application which will translate a latitude/longitude into a Maidenhead grid square. It will also calculate the Great Circle distance and bearing between two locations."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Installing xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> is installed like most applications in Fedora:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" sudo yum install xgridloc\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Setting up xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> uses a small configuration file, <filename>~/.xgridlocrc</filename>. Before using <package>xgridloc</package> you should replace the default location in the file with your station location using your favorite text editor:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+" ######### Runtime config file for 'xgridloc' #########\n"
+" #\n"
+" ### Blank lines and those starting with a # are ignored ###\n"
+" #\n"
+" # The 'Home' location's position.\n"
+" # (East Longitude and North Latitude)\n"
+" # Format is \"East/ddd:mm:ss North/dd:mm:ss\"\n"
+" West/084:11:59 North/43:38:06\n"
+" #\n"
+" # The name of the 'Home' location\n"
+" Midland\n"
+" #\n"
+" "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Using xgridloc"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<package>xgridloc</package> may be started by selecting the menu item <guimenu>Applications->Other->xgridloc</guimenu> or by issuing the <command>xgridloc</command> command from the command line."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Clicking the <guilabel>Default Home Position</guilabel> button will cause the top location to be filled in with the location you specified in the configuration file."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you enter a latitude and longitude in either the \"Home\" or \"Remote\" location and press <command>Enter</command>, the corresponding <guilabel>Locator</guilabel> box will be filled in with the Maidenhead grid square for that location."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Maidenhead grid square"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If both locations are filled, the Great Circle bearing and distance will appear at the bottom of the window."
+msgstr ""
+
diff --git a/zh-TW/others-xwota.po b/zh-TW/others-xwota.po
new file mode 100644
index 0000000..65dbdc3
--- /dev/null
+++ b/zh-TW/others-xwota.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwota"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Who is on the air"
+msgstr ""
+
diff --git a/zh-TW/others-xwxapt.po b/zh-TW/others-xwxapt.po
new file mode 100644
index 0000000..412e6b7
--- /dev/null
+++ b/zh-TW/others-xwxapt.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xwxapt"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/others.po b/zh-TW/others.po
new file mode 100644
index 0000000..cec17c7
--- /dev/null
+++ b/zh-TW/others.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Miscellaneous Applications"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-aprsd.po b/zh-TW/packet-aprsd.po
new file mode 100644
index 0000000..b2319f1
--- /dev/null
+++ b/zh-TW/packet-aprsd.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "aprsd"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-ax25-apps.po b/zh-TW/packet-ax25-apps.po
new file mode 100644
index 0000000..3362ab0
--- /dev/null
+++ b/zh-TW/packet-ax25-apps.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-apps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-ax25-tools.po b/zh-TW/packet-ax25-tools.po
new file mode 100644
index 0000000..05f0e03
--- /dev/null
+++ b/zh-TW/packet-ax25-tools.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "ax25-tools"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-colordx.po b/zh-TW/packet-colordx.po
new file mode 100644
index 0000000..6360c8c
--- /dev/null
+++ b/zh-TW/packet-colordx.po
@@ -0,0 +1,45 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "colrdx"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Yum description for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Colrdx is a simple client for amateur radio dx-clusters. In a\n"
+" : split-screen display you can type commands for the cluster in the\n"
+" : bottom part. Messages from the dx-cluster will appear in the main\n"
+" : window. There is also a status line at the top with some basic\n"
+" : information.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "DX Cluser Client"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "dx cluster client"
+msgstr ""
+
diff --git a/zh-TW/packet-libax25.po b/zh-TW/packet-libax25.po
new file mode 100644
index 0000000..66fb9b9
--- /dev/null
+++ b/zh-TW/packet-libax25.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "libax25"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-node.po b/zh-TW/packet-node.po
new file mode 100644
index 0000000..4c70e43
--- /dev/null
+++ b/zh-TW/packet-node.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "node"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/packet-xastir.po b/zh-TW/packet-xastir.po
new file mode 100644
index 0000000..6cddd8f
--- /dev/null
+++ b/zh-TW/packet-xastir.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xastir"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "APRS tracking"
+msgstr ""
+
diff --git a/zh-TW/packet-xconvers.po b/zh-TW/packet-xconvers.po
new file mode 100644
index 0000000..9a090c7
--- /dev/null
+++ b/zh-TW/packet-xconvers.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xconvers"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Screenshot of converse bridge"
+msgstr ""
+
diff --git a/zh-TW/packet-xdx.po b/zh-TW/packet-xdx.po
new file mode 100644
index 0000000..3f7fecd
--- /dev/null
+++ b/zh-TW/packet-xdx.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xdx"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "xdx cluster client"
+msgstr ""
+
diff --git a/zh-TW/packet.po b/zh-TW/packet.po
new file mode 100644
index 0000000..0930b2b
--- /dev/null
+++ b/zh-TW/packet.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Packet and APRS"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/rig-grig.po b/zh-TW/rig-grig.po
new file mode 100644
index 0000000..e715ed7
--- /dev/null
+++ b/zh-TW/rig-grig.po
@@ -0,0 +1,39 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "grig"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Grig is a graphical user interface for the Ham Radio Control\n"
+" : Libraries. It is intended to be simple and generic, presenting the\n"
+" : user to the same interface regardless of which radio he or she\n"
+" : uses.\n"
+""
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Rig control"
+msgstr ""
+
diff --git a/zh-TW/rig-hamlib.po b/zh-TW/rig-hamlib.po
new file mode 100644
index 0000000..6f70c65
--- /dev/null
+++ b/zh-TW/rig-hamlib.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "hamlib"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamlib provides a standardised programming interface that\n"
+" : applications can use to send the appropriate commands to a radio.\n"
+" : \n"
+" : Also included in the package is a simple radio control program\n"
+" : 'rigctl', which lets one control a radio transceiver or receiver,\n"
+" : either from command line interface or in a text-oriented\n"
+" : interactive interface.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/rig.po b/zh-TW/rig.po
new file mode 100644
index 0000000..736fb62
--- /dev/null
+++ b/zh-TW/rig.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Rig Control"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes rig control applications."
+msgstr ""
+
diff --git a/zh-TW/sdr-gnuradio.po b/zh-TW/sdr-gnuradio.po
new file mode 100644
index 0000000..b53bee5
--- /dev/null
+++ b/zh-TW/sdr-gnuradio.po
@@ -0,0 +1,36 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gnuradio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info for placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: GNU Radio is a collection of software that when combined with\n"
+" : minimal hardware, allows the construction of radios where the\n"
+" : actual waveforms transmitted and received are defined by software.\n"
+" : What this means is that it turns the digital modulation schemes\n"
+" : used in today's high performance wireless devices into software\n"
+" : problems.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/sdr.po b/zh-TW/sdr.po
new file mode 100644
index 0000000..80a849d
--- /dev/null
+++ b/zh-TW/sdr.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Software Defined Radio"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "."
+msgstr ""
+
diff --git a/zh-TW/soundcard-fldigi.po b/zh-TW/soundcard-fldigi.po
new file mode 100644
index 0000000..bc81cf2
--- /dev/null
+++ b/zh-TW/soundcard-fldigi.po
@@ -0,0 +1,29 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "fldigi"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi is one of the most robust soundcard modem software around. It supports CW, DominioEX, Feld-Hell, MFSK, MT-63 PSK, OLIVIA, RTTY, Thor, and Throb. fldigi also includes, as part of the software, a logger which is smart enough to almost complete itself."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "fldigi receiving PSK-31"
+msgstr ""
+
diff --git a/zh-TW/soundcard-gmfsk.po b/zh-TW/soundcard-gmfsk.po
new file mode 100644
index 0000000..2fd4811
--- /dev/null
+++ b/zh-TW/soundcard-gmfsk.po
@@ -0,0 +1,34 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gmfsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: gmfsk is a terminal program for amateur radio digital communication\n"
+" : modes for GNOME. It supports MFSK, RTTY, THROB, PSK31, MT63 and\n"
+" : Hellschreiber modulations. It is used for keyboard-to-keyboard\n"
+" : chatting and not reliable packet communication.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-gpsk31.po b/zh-TW/soundcard-gpsk31.po
new file mode 100644
index 0000000..b41ae97
--- /dev/null
+++ b/zh-TW/soundcard-gpsk31.po
@@ -0,0 +1,31 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "gpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Hamradio PSK31 for Linux with a GTK+ Interface.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-linpsk.po b/zh-TW/soundcard-linpsk.po
new file mode 100644
index 0000000..d5f9f8d
--- /dev/null
+++ b/zh-TW/soundcard-linpsk.po
@@ -0,0 +1,43 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "linpsk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: LinPsk is a program for operating on digital modes running on\n"
+" : Linux. LinPsk supports BPSK, QPSK and RTTY at the moment.\n"
+" : Main features are:\n"
+" : * the simultaneuos decoding of up to four channels.\n"
+" : * The different digital modes may be mixed\n"
+" : * You can define a trigger on each channel to be notified if a text\n"
+" : of your choice is detected.\n"
+" : * You can log each received channel at a file.\n"
+" : * For easy qso'ing you can define macros and for larger texts to be\n"
+" : send you can use two files.\n"
+" : * You can view the signal as spectrum or in a waterfall display.\n"
+" : Both are scalable in the frequency domain.\n"
+" : At the Moment RTTY only supports 45 baud and 1.5 stopbits.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-lpsk31.po b/zh-TW/soundcard-lpsk31.po
new file mode 100644
index 0000000..799a160
--- /dev/null
+++ b/zh-TW/soundcard-lpsk31.po
@@ -0,0 +1,37 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "lpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: lpsk31 is a ncurses console application for ham radio\n"
+" : communications in the popular PSK31 digital mode. lpsk31 uses only\n"
+" : integer arithmetic for both signal detection and audio tone\n"
+" : synthesis, so that it needs no floating point calculations for its\n"
+" : operation. lpsk31 can keep a log of QSO's in text and ADIF format\n"
+" : as well as a raw log of all that is typed in the transmit window or\n"
+" : displayed in the receive window.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-qsstv.po b/zh-TW/soundcard-qsstv.po
new file mode 100644
index 0000000..86b97f6
--- /dev/null
+++ b/zh-TW/soundcard-qsstv.po
@@ -0,0 +1,33 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "qsstv"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder:"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: Qsstv is a program for receiving slow-scan television and fax.\n"
+" : These are modes used by hamradio operators. Qsstv uses a soundcard\n"
+" : to send and receive images.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-xfhell.po b/zh-TW/soundcard-xfhell.po
new file mode 100644
index 0000000..2501696
--- /dev/null
+++ b/zh-TW/soundcard-xfhell.po
@@ -0,0 +1,32 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xfhell"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xfhell is a GTK+ application for the \"fuzzy\" digital amateur radio\n"
+" : communication mode known as Hellschreiber.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard-xpsk31.po b/zh-TW/soundcard-xpsk31.po
new file mode 100644
index 0000000..fb7317d
--- /dev/null
+++ b/zh-TW/soundcard-xpsk31.po
@@ -0,0 +1,35 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "xpsk31"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "yum info as placeholder"
+msgstr ""
+
+#. Tag: screen
+#, no-c-format
+msgid "\n"
+"Description: xpsk31 is a GTK+ graphical version of lpsk31, using the same basic\n"
+" : signal decoding and encoding engine but controlled by the user via\n"
+" : the GUI. In addition it has a FFT-derived \"waterfall\" display of\n"
+" : the incoming signal and a \"magniphase\" display that shows the\n"
+" : magnitude, phase and frequency error of the psk31 signal.\n"
+""
+msgstr ""
+
diff --git a/zh-TW/soundcard.po b/zh-TW/soundcard.po
new file mode 100644
index 0000000..5205bc2
--- /dev/null
+++ b/zh-TW/soundcard.po
@@ -0,0 +1,24 @@
+#
+# AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2010-10-13T13:17:00\n"
+"PO-Revision-Date: 2010-10-13T13:17:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Sound Card Modes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This section describes the sound card modes."
+msgstr ""
+
More information about the docs-commits
mailing list