[deployment-guide] Re-added the Printer Configuration chapter to the Preface.
Jaromir Hradilek
jhradile at fedoraproject.org
Fri Aug 26 13:34:01 UTC 2011
commit e5840a2047bfbb36ae7a00c4c0c931e5e91296a6
Author: Jaromir Hradilek <jhradile at redhat.com>
Date: Fri Aug 26 15:31:59 2011 +0200
Re-added the Printer Configuration chapter to the Preface.
en-US/Author_Group.xml | 147 +++------------------------------------
en-US/Preface.xml | 2 +-
en-US/Printer_Configuration.xml | 33 ++++++---
3 files changed, 33 insertions(+), 149 deletions(-)
---
diff --git a/en-US/Author_Group.xml b/en-US/Author_Group.xml
index 8ef0d40..5ee7ada 100644
--- a/en-US/Author_Group.xml
+++ b/en-US/Author_Group.xml
@@ -9,7 +9,7 @@
<orgname>Red Hat, Inc.</orgname>
<orgdiv>Engineering Content Services</orgdiv>
</affiliation>
- <email>jhradile at redhat.com</email>
+ <email>jhradilek at redhat.com</email>
</author>
<author>
<firstname>Douglas</firstname>
@@ -18,7 +18,7 @@
<orgname>Red Hat, Inc.</orgname>
<orgdiv>Engineering Content Services</orgdiv>
</affiliation>
- <email>dhensley at redhat.com</email>
+ <email>silas at redhat.com</email>
</author>
<author>
<firstname>Martin</firstname>
@@ -39,6 +39,15 @@
<email>ekopalov at redhat.com</email>
</author>
<author>
+ <firstname>Eliška</firstname>
+ <surname>Slobodová</surname>
+ <affiliation>
+ <orgname>Red Hat, Inc.</orgname>
+ <orgdiv>Engineering Content Services</orgdiv>
+ </affiliation>
+ <email>eslobodo at redhat.com</email>
+ </author>
+ <author>
<firstname>John</firstname>
<surname>Ha</surname>
<affiliation>
@@ -74,140 +83,6 @@
</affiliation>
<!--<contrib>System Administration</contrib>-->
</author>
- <!-- jhradile: The following names have been moved to the Acknowledgements section.
- <author>
- <firstname>Michael</firstname>
- <surname>Behm</surname>
- <affiliation>
- <orgname>Red Hat, Inc.</orgname>
- <orgdiv>Engineering Content Services</orgdiv>
- </affiliation>
- <contrib>System Administration</contrib>
- <email></email>
- </author>
- <author>
- <firstname>Paul</firstname>
- <surname>Kennedy</surname>
- <affiliation>
- <orgname>Red Hat, Inc.</orgname>
- <orgdiv>Engineering Content Services</orgdiv>
- </affiliation>
- <contrib>Storage</contrib>
- <email></email>
- </author>-->
- <!--<author>
- <firstname>Melissa</firstname>
- <surname>Golden</surname>
- <affiliation>
- <orgname>Red Hat, Inc.</orgname>
- <orgdiv>Engineering Content Services</orgdiv>
- </affiliation>
- <contrib>Red Hat Network</contrib>
- <email></email>
- </author>
- <othercredit>
- <personname>
- <firstname>Jeffrey</firstname>
- <surname>Fearn</surname>
- </personname>
- <personblurb>
- <para>Honorary for engineering efforts</para>
- </personblurb>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Garrett</firstname>
- <surname>LeSage</surname>
- </personname>
- <personblurb>
- <para>Garrett LeSage created the admonition graphics (note, tip, important, caution, and warning), which may be freely redistributed with the Red Hat documentation.</para>
- </personblurb>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Andrew</firstname>
- <surname>Fitzsimon</surname>
- </personname>
- <personblurb>
- <para>Honorary for graphic design</para>
- </personblurb>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Michael</firstname>
- <surname>Behm</surname>
- </personname>
- <personblurb>
- <para>Honorary for engineering efforts</para>
- </personblurb>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Sandra</firstname>
- <surname>Moore</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Edward</firstname>
- <surname>Bailey</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Karsten</firstname>
- <surname>Wade</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Mark</firstname>
- <surname>Johnson</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Andrius</firstname>
- <surname>Benokraitis</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Lucy</firstname>
- <surname>Ringland</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Miroslav</firstname>
- <surname>Lichvar</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Adam</firstname>
- <surname>Tkáč</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Rahul</firstname>
- <surname>Kavalapara</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Rahul</firstname>
- <surname>Sundaram</surname>
- </personname>
- </othercredit>
- <othercredit>
- <personname>
- <firstname>Marcela</firstname>
- <surname>Mašláňová</surname>
- </personname>
- </othercredit>
- -->
</authorgroup>
<!-- TBD6: translators need to be given credit here. From the RHEL5 colophon: -->
<!--<itemizedlist>
diff --git a/en-US/Preface.xml b/en-US/Preface.xml
index d462bf7..a34f6e4 100644
--- a/en-US/Preface.xml
+++ b/en-US/Preface.xml
@@ -134,7 +134,7 @@
<xref linkend="ch-Directory_Servers" /> covers the installation and configuration of <application>OpenLDAP 2.4</application>, an open source implementation of the LDAPv2 and LDAPv3 protocols. Read this chapter if you need to configure a directory server on your system.
</para>
<para>
- <xref linkend="ch-File_and_Print_Servers" /> guides you through the installation and configuration of <application>Samba</application>, an open source implementation of the Server Message Block (SMB) protocol, and <application>vsftpd</application>, the primary FTP server shipped with &MAJOROS;. <!-- Additionally, it explains how to use the <application>Printer Configuration</application> tool to configure printers. --> Read this chapter if you need to configure a file <!-- or print --> server on your system.
+ <xref linkend="ch-File_and_Print_Servers" /> guides you through the installation and configuration of <application>Samba</application>, an open source implementation of the Server Message Block (SMB) protocol, and <application>vsftpd</application>, the primary FTP server shipped with &MAJOROS;. Additionally, it explains how to use the <application>Printer Configuration</application> tool to configure printers. Read this chapter if you need to configure a file or print server on your system.
</para>
</listitem>
</varlistentry>
diff --git a/en-US/Printer_Configuration.xml b/en-US/Printer_Configuration.xml
index aa9b7d6..8125ab3 100644
--- a/en-US/Printer_Configuration.xml
+++ b/en-US/Printer_Configuration.xml
@@ -20,7 +20,8 @@
<para>
With the Printer Configuration tool you can perform various operations on existing printers and set up new printers. However, you can use also CUPS directly (go to <ulink url="http://localhost:631/">http://localhost:631/</ulink> to access CUPS).
</para>
- <para>On the upper panel, go to <guimenu>Activities</guimenu>, choose <guisubmenu>Applications</guisubmenu> and click <guimenuitem>Printing</guimenuitem>. Alternatively, run the <command>system-config-printer</command> command from the command line to start the tool.
+ <para>
+ On the upper panel, go to <guimenu>Activities</guimenu>, choose <guisubmenu>Applications</guisubmenu> and click <guimenuitem>Printing</guimenuitem>. Alternatively, run the <command>system-config-printer</command> command from the command line to start the tool.
</para>
<para>
The <guilabel>Printer Configuration</guilabel> window depicted in <xref linkend="fig-printconf-main" /> appears.
@@ -63,7 +64,7 @@
</step>
<step>
<para>
- In the <guilabel>Authentication Required</guilabel> box, type the root user password and confirm.
+ In the <guilabel>Authentication Required</guilabel> box, type the root user password and confirm.
</para>
</step>
<step>
@@ -254,7 +255,7 @@
<term><guilabel>Queue</guilabel></term>
<listitem>
<para>
- queue name to be given to the new queue (If the box is left empty, a name based on the device node will be used.)
+ queue name to be given to the new queue (if the box is left empty, a name based on the device node will be used)
</para>
</listitem>
</varlistentry>
@@ -273,10 +274,9 @@
</step>
<step>
<para>
- Optionally, click <guibutton>Verify</guibutton> to detect the printer.
+ Optionally, click <guibutton>Verify</guibutton> to detect the printer.
</para>
</step>
-
<step>
<para>
Click <guibutton>Forward</guibutton> to continue.
@@ -318,14 +318,14 @@
</para>
<para>
Optionally, click <guibutton>Probe</guibutton> to find queues on the LPD host.
- </para>
+ </para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Queue</guilabel></term>
<listitem>
<para>
- queue name to be given to the new queue (If the box is left empty, a name based on the device node will be used.)
+ queue name to be given to the new queue (if the box is left empty, a name based on the device node will be used)
</para>
</listitem>
</varlistentry>
@@ -356,13 +356,22 @@
</step>
</procedure>
</section>
- <section id="s1-printing-smb-printer">
+ <section id="s1-printing-smb-printer">
<title>Adding a Samba (SMB) printer</title>
<procedure id="proc-Adding_SMB_Printer">
<para>
Follow this procedure to add a Samba printer:
</para>
- <note><title>Installing the samba-client package</title><para>Note that in order to add a Samba printer, you need to have the <package>samba-client</package> package installed. You can do so by running, as <systemitem>root</systemitem>:</para> <para><screen><command>yum isntall samba-client</command></screen></para><para>For more information on installing packages with Yum, refer to <xref linkend="sec-Installing" />. </para></note>
+ <note>
+ <title>Installing the samba-client package</title>
+ <para>
+ Note that in order to add a Samba printer, you need to have the <package>samba-client</package> package installed. You can do so by running, as <systemitem class="username">root</systemitem>:
+ </para>
+ <screen><command>yum isntall samba-client</command></screen>
+ <para>
+ For more information on installing packages with Yum, refer to <xref linkend="sec-Installing" />.
+ </para>
+ </note>
<step>
<para>
Open the <systemitem>New Printer</systemitem> dialog (refer to <xref linkend="sec-Setting_Printer" />).
@@ -499,7 +508,7 @@
<itemizedlist>
<listitem>
<para>
- Printer brand for the <guilabel>Select printer from database</guilabel> option
+ Printer brand for the <guilabel>Select printer from database</guilabel> option
</para>
</listitem>
<listitem>
@@ -573,7 +582,7 @@
</step>
<step>
<para>
- After the changes are applied, a dialog box appears allowing you to print a test page. Click <guibutton>Print Test Page</guibutton> to print a test page now. Alternatively, you can print a test page also later, refer to <xref linkend="s1-printing-test-page" /> for details.
+ After the changes are applied, a dialog box appears allowing you to print a test page. Click <guibutton>Print Test Page</guibutton> to print a test page now. Alternatively, you can print a test page also later, refer to <xref linkend="s1-printing-test-page" /> for details.
</para>
</step>
</procedure>
@@ -746,7 +755,7 @@
When you send a print job to the printer daemon, such as printing a text file from <application>Emacs</application> or printing an image from <application>GIMP</application>, the print job is added to the print spool queue. The print spool queue is a list of print jobs that have been sent to the printer and information about each print request, such as the status of the request, the job number, and more.
</para>
<para>
- During the printing process, messages informing about the process appear in the Notification Area.
+ During the printing process, messages informing about the process appear in the notification area.
</para>
<figure float="0" id="fig-gnome-print-manager-list">
<title>GNOME Print Status</title>
More information about the docs-commits
mailing list