[fedora-india] DVD writer troubles

Ankur Sinha sanjay.ankur at gmail.com
Fri Oct 2 16:23:35 UTC 2009


Hi,

I do realize this isnt the right place for the query, but I really dint
know where else to ask. 

My fedora system cannot burn dvds properly. That is, my laptop burner
and the new USB burner I got just today. I'm using "wodim" and it
continually wastes dvds. 

Here is an example:

[Ankur at Ankur Fedora-11-i386-DVD]$ wodim -scanbus
scsibus4:
	4,0,0	400) 'HL-DT-ST' 'DVDRAM GSA-4084N' 'KQ09' Removable CD-ROM
	4,1,0	401) *
	4,2,0	402) *
	4,3,0	403) *
	4,4,0	404) *
	4,5,0	405) *
	4,6,0	406) *
	4,7,0	407) *
scsibus14:
	14,0,0	1400) 'SONY    ' 'DVD+-RW DW-D56A ' 'PDS7' Removable CD-ROM
	14,1,0	1401) *
	14,2,0	1402) *
	14,3,0	1403) *
	14,4,0	1404) *
	14,5,0	1405) *
	14,6,0	1406) *
	14,7,0	1407) *
------------------------------------------

[Ankur at Ankur Fedora-11-i386-DVD]$ su -c ' nice -n -18 wodim -v -eject
dev=14,0,0 Fedora-11-i386-DVD.iso '
Password: 
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent
defaults.
TOC Type: 1 = CD-ROM
scsidev: '14,0,0'
scsibus: 14 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device
specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 32768
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identification : 'DVD+-RW DW-D56A '
Revision       : 'PDS7'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0xFE12 () 
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1563904 = 1527 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if
device
communication breaks or freezes immediately after that.
FIFO size      : 4194304 = 4096 KB
Track 01: data  3513 MB        
Total size:     4034 MB (399:43.26) = 1798745 sectors
Lout start:     4034 MB (399:45/20) = 1798745 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 499751
Speed set to 2770 KB/s
Starting to write CD/DVD at speed   2.0 in real unknown mode for single
session.
Last chance to quit, starting real write in    0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 1842 of 3513 MB written (fifo  99%) [buf  99%]   3.0x.Errno: 5
(Input/output error), write_g1 scsi sendcmd: retryable error
CDB:  2A 00 00 0E 65 D0 00 00 10 00
status: 0x0 (GOOD STATUS)
resid: 17408
cmd finished after 42.754s timeout 40s

write track data: error after 1932427264 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.436s timeout 40s
Writing  time:  542.984s
Average write speed   5.0x.
Min drive buffer fill was 99%
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.940s timeout 120s
Trouble flushing the cache
wodim: Cannot fixate disk.
Fixating time:    0.940s
wodim: fifo had 59101 puts and 58974 gets.
wodim: fifo was 0 times empty and 22707 times full, min fill was 72%.


I thought it was caused due to a faulty drive. However, as you can see,
the new USB drive I got just today gives the same errors. Please advise
a course of action.

-- 
regards,

Ankur




More information about the india mailing list