[fedora-india] Problem in connecting to Broadband Internet

[Sawrub]

  On 11/08/2010 09:46 AM, raj kumar wrote:
>
>
> ----- Forwarded Message ----
> *From:* raj kumar <future_it_pro at yahoo.co.in>
> *To:* india-owner at lists.fedoraproject.org
> *Sent:* Sun, 7 November, 2010 7:32:00 AM
> *Subject:* Problem in connecting to Broadband Internet
>
> Hi,
> I installed Fedora 14 and tried to connect to internet via bsnl 
> broadband connection using an user id and password.
> I created Ethernet and xdsl
> xdsl(BSNL) is getting active, but ethernet(eth0) is not activating.
> When i was trying to activate it getting following error
> Determining IP information for eth0.../etc/init.d/functions: line 51: 
> /dev/stderr: Permission denied
> /etc/rc.d/init.d/functions: line 51: /dev/stderr: Permission denied
> Please kindly help me in connection my linux system to internet.
> Thanking You,
> Rajkumar
> ===============================================
> I have also tested following for your reference:
> [raj at localhost ~]$ dhclient eth0
> Can't create /var/run/dhclient.pid: Permission denied
> RTNETLINK answers: Operation not permitted
>
> [raj at localhost ~]$ ifconfig eth0
> eth0      Link encap:Ethernet  HWaddr 00:14:2A:D4:C8:86
>           inet6 addr: fe80::214:2aff:fed4:c886/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1140 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:1166 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:149778 (146.2 KiB)  TX bytes:147990 (144.5 KiB)
>           Interrupt:20 Base address:0x2c00
> [raj at localhost ~]$ /sbin/lspci
> 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host 
> Bridge (rev 01)
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA 
> Controller (rev 80)
> 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA 
> Controller (rev 80)
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
> Controller (rev 80)
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
> Controller (rev 80)
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host 
> Controller (rev 80)
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
> 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller 
> (rev 80)
> 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition 
> Audio Controller (rev 01)
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon 
> Xpress 200]
> 02:01.0 Communication controller: Agere Systems Lucent V.92 Data/Fax Modem
> 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL-8139/8139C/8139C+ (rev 10)
> 02:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire 
> II(M)] IEEE 1394 OHCI Controller (rev 80)
>
>
>
> _______________________________________________
> india mailing list
> india at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/india
Hi i was using F12 with MTNL connection, i installed a fresh F14 and all 
the configuration was auto detected. I think that the connection should 
have worked the same work for you, at least if you have not changed your 
router's settings.

-- 
Saurabh Sharma
Linux user number: 490644
http://sawrub-blog.blogspot.com/
Open your doors.......It's time to look beyond Windows

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/india/attachments/20101109/340fc40c/attachment.html