[PATCH] finish the postfix migration to sanity away from the templates. This should allow us to have main.cf and master.cf files in the postfix/files/dirs with extensions corresponding to the fqdn/hostname/group/datacenter that they are and a sensible default.
skvidal at fedoraproject.org
skvidal at fedoraproject.org
Fri Sep 16 21:16:44 UTC 2011
From: Seth Vidal <skvidal at fedoraproject.org>
all without lots of random definitions
---
.../nodes/compose-x86-01.phx2.fedoraproject.org.pp | 2 -
manifests/services/gateway.pp | 17 +-
manifests/services/smtp-mm.pp | 16 +-
manifests/services/valueadd.pp | 22 +-
modules/postfix/files/main.cf/main.cf | 2 +-
modules/postfix/files/main.cf/main.cf.bastion | 704 --------------------
modules/postfix/files/main.cf/main.cf.external | 685 -------------------
modules/postfix/files/main.cf/main.cf.gateway | 704 ++++++++++++++++++++
modules/postfix/files/main.cf/main.cf.phx | 685 +++++++++++++++++++
modules/postfix/files/master.cf/master.cf | 96 +++
modules/postfix/files/master.cf/master.cf.hosted01 | 98 +++
modules/postfix/files/master.cf/master.cf.value | 100 +++
modules/postfix/manifests/init.pp | 108 +---
13 files changed, 1722 insertions(+), 1517 deletions(-)
delete mode 100644 modules/postfix/files/main.cf/main.cf.bastion
delete mode 100644 modules/postfix/files/main.cf/main.cf.external
create mode 100644 modules/postfix/files/main.cf/main.cf.gateway
create mode 100644 modules/postfix/files/main.cf/main.cf.phx
create mode 100644 modules/postfix/files/master.cf/master.cf
create mode 100644 modules/postfix/files/master.cf/master.cf.hosted01
create mode 100644 modules/postfix/files/master.cf/master.cf.value
diff --git a/manifests/nodes/compose-x86-01.phx2.fedoraproject.org.pp b/manifests/nodes/compose-x86-01.phx2.fedoraproject.org.pp
index bd5f051..2e82631 100644
--- a/manifests/nodes/compose-x86-01.phx2.fedoraproject.org.pp
+++ b/manifests/nodes/compose-x86-01.phx2.fedoraproject.org.pp
@@ -1,6 +1,4 @@
node compose-x86-01 {
- # For some reason rawhide postfix wants FQDN
- $relayHost='bastion.phx2.fedoraproject.org'
include phx
include composer
}
diff --git a/manifests/services/gateway.pp b/manifests/services/gateway.pp
index 58c0c3c..79ca3a7 100644
--- a/manifests/services/gateway.pp
+++ b/manifests/services/gateway.pp
@@ -1,25 +1,14 @@
class gateway{
$fas_groups = [ 'sysadmin-ask', 'sysadmin-web', 'sysadmin-main', 'sysadmin-cvs', 'sysadmin-build', 'sysadmin-noc', 'sysadmin-releng', 'sysadmin-dba', 'sysadmin-hosted', 'sysadmin-tools', 'qa-admin', 'sysadmin-spin' , 'sysadmin-cloud', 'fi-apprentice' ]
$syncFasOften = true
- $relayhost=1
$isRelayGateway=true
$sshd_config_PasswordAuthentication = 'no'
$sshd_config_PermitRootLogin = 'yes'
$sshd_config_PermitTunnel = 'yes'
$transport_maps='hash:/etc/postfix/transport'
- postfix::postfix { 'server':
- mydomain => 'fedoraproject.org',
- myorigin => 'fedoraproject.org',
- inet_interfaces => 'all',
- mydestination => '$myhostname, localhost.$mydomain, fedora.redhat.com, localhost , $mydomain', # escaped on purpose
- mynetworks => 'localhost.localdomain, localhost, 127.0.0.1, 10.5.125.0/24, 10.5.126.0/24, 10.5.127.0/24, 192.168.0.0/16',
- relay_domains => '$mydestination fedora.phx.redhat.com',
- alias_maps => 'hash:/etc/aliases, hash:/etc/postfix/package-owner',
- transport_maps => 'hash:/etc/postfix/transport',
- smtp_helo_name => 'bastion.fedoraproject.org',
- mailbox_transport => 'lmtp:10.5.126.73:2003',
- local_recipient_maps => 'hash:/etc/postfix/relay_recipient_maps'
- }
+ $postfix_group = 'gateway'
+ postfix::postfix { 'server':}
+ postfix::transport{'transports.gateway': }
include global
include snmp-utils
diff --git a/manifests/services/smtp-mm.pp b/manifests/services/smtp-mm.pp
index 3178f94..2bdb1e1 100644
--- a/manifests/services/smtp-mm.pp
+++ b/manifests/services/smtp-mm.pp
@@ -1,16 +1,8 @@
class smtp-mm {
$fas_groups = [ 'sysadmin-main', 'sysadmin-noc', 'sysadmin-tools' , 'fi-apprentice' ]
- $isMailmanSMTP=1
- postfix::postfix { 'server':
- mydomain => 'fedoraproject.org',
- myorigin => 'fedoraproject.org',
- inet_interfaces => 'all',
- relayhost => ' ',
- mydestination => '$myhostname, localhost.$mydomain',
- relay_domains => '$mydestination lists.fedoraproject.org lists.fedorahosted.org',
- transport_maps => 'hash:/etc/postfix/transport'
- }
-
+ $postfix_group = 'smtp-mm'
+ postfix::postfix { 'server':}
+ postfix::transport { 'transports.mm-smtp': }
include global
include fas::client
include selinux-enforcing
@@ -19,7 +11,7 @@ class smtp-mm {
collectd::collectd { 'log02': }
- postfix::transport { 'transports.mm-smtp': }
+
# Firewall Rules, allow SMTP traffic through
iptables::firewall { 'ipv4':
diff --git a/manifests/services/valueadd.pp b/manifests/services/valueadd.pp
index 1917643..1a6c41f 100644
--- a/manifests/services/valueadd.pp
+++ b/manifests/services/valueadd.pp
@@ -3,26 +3,8 @@ class valueadd {
$fas_ssh_groups = [ '@all']
$fas_restricted_app = '/dev/null'
- postfix::postfix { 'server':
- mydomain => 'fedoraproject.org',
- myorigin => 'fedoraproject.org',
- inet_interfaces => 'all',
- relayhost => 'bastion',
- mydestination => '$myhostname, localhost.$mydomain, localhost',
- relay_domains => ' ',
- custom => ['#TLS - SMTP AUTH',
- 'disable_vrfy_command = yes',
- 'smtpd_use_tls = yes',
- 'smtpd_tls_auth_only = yes',
- 'tls_random_source = dev:/dev/urandom',
- 'smtpd_tls_cert_file = /etc/postfix/cert.pem',
- 'smtpd_tls_key_file = /etc/postfix/key.pem',
- 'smtpd_sasl_auth_enable = yes',
- 'smtpd_sasl_security_options = noanonymous',
- 'broken_sasl_auth_clients = yes',
- 'smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination'],
- smtps => true,
- }
+ $postfix_group = 'value'
+ postfix::postfix { 'server':}
include cyrus-sasl::cyrus-sasl
diff --git a/modules/postfix/files/main.cf/main.cf b/modules/postfix/files/main.cf/main.cf
index 1707639..0e502d2 100644
--- a/modules/postfix/files/main.cf/main.cf
+++ b/modules/postfix/files/main.cf/main.cf
@@ -313,7 +313,7 @@ unknown_local_recipient_reject_code = 550
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
-relayhost = bastion
+relayhost =
# REJECTING UNKNOWN RELAY USERS
diff --git a/modules/postfix/files/main.cf/main.cf.bastion b/modules/postfix/files/main.cf/main.cf.bastion
deleted file mode 100644
index f0b52de..0000000
--- a/modules/postfix/files/main.cf/main.cf.bastion
+++ /dev/null
@@ -1,704 +0,0 @@
-# Global Postfix configuration file. This file lists only a subset
-# of all parameters. For the syntax, and for a complete parameter
-# list, see the postconf(5) manual page (command: "man 5 postconf").
-#
-# For common configuration examples, see BASIC_CONFIGURATION_README
-# and STANDARD_CONFIGURATION_README. To find these documents, use
-# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
-#
-# For best results, change no more than 2-3 parameters at a time,
-# and test if Postfix still works after every change.
-
-# Custom rules
-
-# SOFT BOUNCE
-#
-# The soft_bounce parameter provides a limited safety net for
-# testing. When soft_bounce is enabled, mail will remain queued that
-# would otherwise bounce. This parameter disables locally-generated
-# bounces, and prevents the SMTP server from rejecting mail permanently
-# (by changing 5xx replies into 4xx replies). However, soft_bounce
-# is no cure for address rewriting mistakes or mail routing mistakes.
-#
-#soft_bounce = no
-
-# LOCAL PATHNAME INFORMATION
-#
-# The queue_directory specifies the location of the Postfix queue.
-# This is also the root directory of Postfix daemons that run chrooted.
-# See the files in examples/chroot-setup for setting up Postfix chroot
-# environments on different UNIX systems.
-#
-queue_directory = /var/spool/postfix
-
-# The command_directory parameter specifies the location of all
-# postXXX commands.
-#
-command_directory = /usr/sbin
-
-# The daemon_directory parameter specifies the location of all Postfix
-# daemon programs (i.e. programs listed in the master.cf file). This
-# directory must be owned by root.
-#
-daemon_directory = /usr/libexec/postfix
-
-# The data_directory parameter specifies the location of Postfix-writable
-# data files (caches, random numbers). This directory must be owned
-# by the mail_owner account (see below).
-#
-data_directory = /var/lib/postfix
-
-# QUEUE AND PROCESS OWNERSHIP
-#
-# The mail_owner parameter specifies the owner of the Postfix queue
-# and of most Postfix daemon processes. Specify the name of a user
-# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
-# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
-# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
-# USER.
-#
-mail_owner = postfix
-
-# The default_privs parameter specifies the default rights used by
-# the local delivery agent for delivery to external file or command.
-# These rights are used in the absence of a recipient user context.
-# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
-#
-#default_privs = nobody
-
-# INTERNET HOST AND DOMAIN NAMES
-#
-# The myhostname parameter specifies the internet hostname of this
-# mail system. The default is to use the fully-qualified domain name
-# from gethostname(). $myhostname is used as a default value for many
-# other configuration parameters.
-#
-#myhostname = host.domain.tld
-#myhostname = virtual.domain.tld
-
-
-smtp_helo_name = bastion.fedoraproject.org
-
-# The mydomain parameter specifies the local internet domain name.
-# The default is to use $myhostname minus the first component.
-# $mydomain is used as a default value for many other configuration
-# parameters.
-#
-#mydomain = domain.tld
-
-mydomain = fedoraproject.org
-
-# SENDING MAIL
-#
-# The myorigin parameter specifies the domain that locally-posted
-# mail appears to come from. The default is to append $myhostname,
-# which is fine for small sites. If you run a domain with multiple
-# machines, you should (1) change this to $mydomain and (2) set up
-# a domain-wide alias database that aliases each user to
-# user at that.users.mailhost.
-#
-# For the sake of consistency between sender and recipient addresses,
-# myorigin also specifies the default domain name that is appended
-# to recipient addresses that have no @domain part.
-#
-#myorigin = $myhostname
-#myorigin = $mydomain
-
-myorigin = fedoraproject.org
-
-# RECEIVING MAIL
-
-# The inet_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on. By default,
-# the software claims all active interfaces on the machine. The
-# parameter also controls delivery of mail to user@[ip.address].
-#
-# See also the proxy_interfaces parameter, for network addresses that
-# are forwarded to us via a proxy or network address translator.
-#
-# Note: you need to stop/start Postfix when this parameter changes.
-#
-#inet_interfaces = all
-#inet_interfaces = $myhostname
-#inet_interfaces = $myhostname, localhost
-
-inet_interfaces = all
-
-# The proxy_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on by way of a
-# proxy or network address translation unit. This setting extends
-# the address list specified with the inet_interfaces parameter.
-#
-# You must specify your proxy/NAT addresses when your system is a
-# backup MX host for other domains, otherwise mail delivery loops
-# will happen when the primary MX host is down.
-#
-#proxy_interfaces =
-#proxy_interfaces = 1.2.3.4
-
-# The mydestination parameter specifies the list of domains that this
-# machine considers itself the final destination for.
-#
-# These domains are routed to the delivery agent specified with the
-# local_transport parameter setting. By default, that is the UNIX
-# compatible delivery agent that lookups all recipients in /etc/passwd
-# and /etc/aliases or their equivalent.
-#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
-#
-# Do not specify the names of virtual domains - those domains are
-# specified elsewhere (see VIRTUAL_README).
-#
-# Do not specify the names of domains that this machine is backup MX
-# host for. Specify those names via the relay_domains settings for
-# the SMTP server, or use permit_mx_backup if you are lazy (see
-# STANDARD_CONFIGURATION_README).
-#
-# The local machine is always the final destination for mail addressed
-# to user@[the.net.work.address] of an interface that the mail system
-# receives mail on (see the inet_interfaces parameter).
-#
-# Specify a list of host or domain names, /file/name or type:table
-# patterns, separated by commas and/or whitespace. A /file/name
-# pattern is replaced by its contents; a type:table is matched when
-# a name matches a lookup key (the right-hand side is ignored).
-# Continue long lines by starting the next line with whitespace.
-#
-# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
-#
-
-mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost , $mydomain
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
-# mail.$mydomain, www.$mydomain, ftp.$mydomain
-
-# REJECTING MAIL FOR UNKNOWN LOCAL USERS
-#
-# The local_recipient_maps parameter specifies optional lookup tables
-# with all names or addresses of users that are local with respect
-# to $mydestination, $inet_interfaces or $proxy_interfaces.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown local users. This parameter is defined by default.
-#
-# To turn off local recipient checking in the SMTP server, specify
-# local_recipient_maps = (i.e. empty).
-#
-# The default setting assumes that you use the default Postfix local
-# delivery agent for local delivery. You need to update the
-# local_recipient_maps setting if:
-#
-# - You define $mydestination domain recipients in files other than
-# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
-# For example, you define $mydestination domain recipients in
-# the $virtual_mailbox_maps files.
-#
-# - You redefine the local delivery agent in master.cf.
-#
-# - You redefine the "local_transport" setting in main.cf.
-#
-# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
-# feature of the Postfix local delivery agent (see local(8)).
-#
-# Details are described in the LOCAL_RECIPIENT_README file.
-#
-# Beware: if the Postfix SMTP server runs chrooted, you probably have
-# to access the passwd file via the proxymap service, in order to
-# overcome chroot restrictions. The alternative, having a copy of
-# the system passwd file in the chroot jail is just not practical.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify a bare username, an @domain.tld
-# wild-card, or specify a user at domain.tld address.
-#
-#local_recipient_maps = unix:passwd.byname $alias_maps
-#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
-#local_recipient_maps =
-local_recipient_maps = $alias_maps hash:/etc/postfix/relay_recipient_maps
-
-# The unknown_local_recipient_reject_code specifies the SMTP server
-# response code when a recipient domain matches $mydestination or
-# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
-# and the recipient address or address local-part is not found.
-#
-# The default setting is 550 (reject mail) but it is safer to start
-# with 450 (try again later) until you are certain that your
-# local_recipient_maps settings are OK.
-#
-unknown_local_recipient_reject_code = 550
-
-# TRUST AND RELAY CONTROL
-
-# The mynetworks parameter specifies the list of "trusted" SMTP
-# clients that have more privileges than "strangers".
-#
-# In particular, "trusted" SMTP clients are allowed to relay mail
-# through Postfix. See the smtpd_recipient_restrictions parameter
-# in postconf(5).
-#
-# You can specify the list of "trusted" network addresses by hand
-# or you can let Postfix do it for you (which is the default).
-#
-# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
-# clients in the same IP subnetworks as the local machine.
-# On Linux, this does works correctly only with interfaces specified
-# with the "ifconfig" command.
-#
-# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
-# clients in the same IP class A/B/C networks as the local machine.
-# Don't do this with a dialup site - it would cause Postfix to "trust"
-# your entire provider's network. Instead, specify an explicit
-# mynetworks list by hand, as described below.
-#
-# Specify "mynetworks_style = host" when Postfix should "trust"
-# only the local machine.
-#
-#mynetworks_style = class
-#mynetworks_style = subnet
-#mynetworks_style = host
-
-
-# Alternatively, you can specify the mynetworks list by hand, in
-# which case Postfix ignores the mynetworks_style setting.
-#
-# Specify an explicit list of network/netmask patterns, where the
-# mask specifies the number of bits in the network part of a host
-# address.
-#
-# You can also specify the absolute pathname of a pattern file instead
-# of listing the patterns here. Specify type:table for table-based lookups
-# (the value on the table right-hand side is not used).
-#
-#mynetworks = 168.100.189.0/28, 127.0.0.0/8
-#mynetworks = $config_directory/mynetworks
-#mynetworks = hash:/etc/postfix/network_table
-
-mynetworks = localhost.localdomain, localhost, 127.0.0.1, 10.5.125.0/24, 10.5.126.0/24, 10.5.127.0/24, 192.168.0.0/16
-
-# The relay_domains parameter restricts what destinations this system will
-# relay mail to. See the smtpd_recipient_restrictions description in
-# postconf(5) for detailed information.
-#
-# By default, Postfix relays mail
-# - from "trusted" clients (IP address matches $mynetworks) to any destination,
-# - from "untrusted" clients to destinations that match $relay_domains or
-# subdomains thereof, except addresses with sender-specified routing.
-# The default relay_domains value is $mydestination.
-#
-# In addition to the above, the Postfix SMTP server by default accepts mail
-# that Postfix is final destination for:
-# - destinations that match $inet_interfaces or $proxy_interfaces,
-# - destinations that match $mydestination
-# - destinations that match $virtual_alias_domains,
-# - destinations that match $virtual_mailbox_domains.
-# These destinations do not need to be listed in $relay_domains.
-#
-# Specify a list of hosts or domains, /file/name patterns or type:name
-# lookup tables, separated by commas and/or whitespace. Continue
-# long lines by starting the next line with whitespace. A file name
-# is replaced by its contents; a type:name table is matched when a
-# (parent) domain appears as lookup key.
-#
-# NOTE: Postfix will not automatically forward mail for domains that
-# list this system as their primary or backup MX host. See the
-# permit_mx_backup restriction description in postconf(5).
-#
-#relay_domains = $mydestination
-
-relay_domains = $mydestination fedora.phx.redhat.com
-
-# INTERNET OR INTRANET
-
-# The relayhost parameter specifies the default host to send mail to
-# when no entry is matched in the optional transport(5) table. When
-# no relayhost is given, mail is routed directly to the destination.
-#
-# On an intranet, specify the organizational domain name. If your
-# internal DNS uses no MX records, specify the name of the intranet
-# gateway host instead.
-#
-# In the case of SMTP, specify a domain, host, host:port, [host]:port,
-# [address] or [address]:port; the form [host] turns off MX lookups.
-#
-# If you're connected via UUCP, see also the default_transport parameter.
-#
-#relayhost = $mydomain
-#relayhost = [gateway.my.domain]
-#relayhost = [mailserver.isp.tld]
-#relayhost = uucphost
-#relayhost = [an.ip.add.ress]
-
-
-# REJECTING UNKNOWN RELAY USERS
-#
-# The relay_recipient_maps parameter specifies optional lookup tables
-# with all addresses in the domains that match $relay_domains.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown relay users. This feature is off by default.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify an @domain.tld wild-card, or specify
-# a user at domain.tld address.
-#
-#relay_recipient_maps = hash:/etc/postfix/relay_recipients
-
-# INPUT RATE CONTROL
-#
-# The in_flow_delay configuration parameter implements mail input
-# flow control. This feature is turned on by default, although it
-# still needs further development (it's disabled on SCO UNIX due
-# to an SCO bug).
-#
-# A Postfix process will pause for $in_flow_delay seconds before
-# accepting a new message, when the message arrival rate exceeds the
-# message delivery rate. With the default 100 SMTP server process
-# limit, this limits the mail inflow to 100 messages a second more
-# than the number of messages delivered per second.
-#
-# Specify 0 to disable the feature. Valid delays are 0..10.
-#
-#in_flow_delay = 1s
-
-# ADDRESS REWRITING
-#
-# The ADDRESS_REWRITING_README document gives information about
-# address masquerading or other forms of address rewriting including
-# username->Firstname.Lastname mapping.
-
-# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
-#
-# The VIRTUAL_README document gives information about the many forms
-# of domain hosting that Postfix supports.
-
-# "USER HAS MOVED" BOUNCE MESSAGES
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# TRANSPORT MAP
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# ALIAS DATABASE
-#
-# The alias_maps parameter specifies the list of alias databases used
-# by the local delivery agent. The default list is system dependent.
-#
-# On systems with NIS, the default is to search the local alias
-# database, then the NIS alias database. See aliases(5) for syntax
-# details.
-#
-# If you change the alias database, run "postalias /etc/aliases" (or
-# wherever your system stores the mail alias file), or simply run
-# "newaliases" to build the necessary DBM or DB file.
-#
-# It will take a minute or so before changes become visible. Use
-# "postfix reload" to eliminate the delay.
-#
-#alias_maps = dbm:/etc/aliases
-alias_maps = hash:/etc/aliases
-alias_maps = hash:/etc/aliases, hash:/etc/postfix/package-owner
-#alias_maps = hash:/etc/aliases, nis:mail.aliases
-#alias_maps = netinfo:/aliases
-
-# The alias_database parameter specifies the alias database(s) that
-# are built with "newaliases" or "sendmail -bi". This is a separate
-# configuration parameter, because alias_maps (see above) may specify
-# tables that are not necessarily all under control by Postfix.
-#
-#alias_database = dbm:/etc/aliases
-#alias_database = dbm:/etc/mail/aliases
-alias_database = hash:/etc/aliases
-#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
-
-# ADDRESS EXTENSIONS (e.g., user+foo)
-#
-# The recipient_delimiter parameter specifies the separator between
-# user names and address extensions (user+foo). See canonical(5),
-# local(8), relocated(5) and virtual(5) for the effects this has on
-# aliases, canonical, virtual, relocated and .forward file lookups.
-# Basically, the software tries user+foo and .forward+foo before
-# trying user and .forward.
-#
-recipient_delimiter = +
-
-# DELIVERY TO MAILBOX
-#
-# The home_mailbox parameter specifies the optional pathname of a
-# mailbox file relative to a user's home directory. The default
-# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
-# "Maildir/" for qmail-style delivery (the / is required).
-#
-#home_mailbox = Mailbox
-#home_mailbox = Maildir/
-
-# The mail_spool_directory parameter specifies the directory where
-# UNIX-style mailboxes are kept. The default setting depends on the
-# system type.
-#
-#mail_spool_directory = /var/mail
-#mail_spool_directory = /var/spool/mail
-
-# The mailbox_command parameter specifies the optional external
-# command to use instead of mailbox delivery. The command is run as
-# the recipient with proper HOME, SHELL and LOGNAME environment settings.
-# Exception: delivery for root is done as $default_user.
-#
-# Other environment variables of interest: USER (recipient username),
-# EXTENSION (address extension), DOMAIN (domain part of address),
-# and LOCAL (the address localpart).
-#
-# Unlike other Postfix configuration parameters, the mailbox_command
-# parameter is not subjected to $parameter substitutions. This is to
-# make it easier to specify shell syntax (see example below).
-#
-# Avoid shell meta characters because they will force Postfix to run
-# an expensive shell process. Procmail alone is expensive enough.
-#
-# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
-# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
-#
-#mailbox_command = /some/where/procmail
-#mailbox_command = /some/where/procmail -a "$EXTENSION"
-
-# The mailbox_transport specifies the optional transport in master.cf
-# to use after processing aliases and .forward files. This parameter
-# has precedence over the mailbox_command, fallback_transport and
-# luser_relay parameters.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-
-# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
-# server using LMTP (Local Mail Transport Protocol), this is prefered
-# over the older cyrus deliver program by setting the
-# mailbox_transport as below:
-#
-# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-#
-# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
-# these settings.
-#
-# local_destination_recipient_limit = 300
-# local_destination_concurrency_limit = 5
-#
-# Of course you should adjust these settings as appropriate for the
-# capacity of the hardware you are using. The recipient limit setting
-# can be used to take advantage of the single instance message store
-# capability of Cyrus. The concurrency limit can be used to control
-# how many simultaneous LMTP sessions will be permitted to the Cyrus
-# message store.
-#
-# To use the old cyrus deliver program you have to set:
-#mailbox_transport = cyrus
-
-
-mailbox_transport = lmtp:10.5.126.73:2003
-
-# The fallback_transport specifies the optional transport in master.cf
-# to use for recipients that are not found in the UNIX passwd database.
-# This parameter has precedence over the luser_relay parameter.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-#fallback_transport =
-
-# The luser_relay parameter specifies an optional destination address
-# for unknown recipients. By default, mail for unknown@$mydestination,
-# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
-# as undeliverable.
-#
-# The following expansions are done on luser_relay: $user (recipient
-# username), $shell (recipient shell), $home (recipient home directory),
-# $recipient (full recipient address), $extension (recipient address
-# extension), $domain (recipient domain), $local (entire recipient
-# localpart), $recipient_delimiter. Specify ${name?value} or
-# ${name:value} to expand value only when $name does (does not) exist.
-#
-# luser_relay works only for the default Postfix local delivery agent.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must specify "local_recipient_maps =" (i.e. empty) in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#luser_relay = $user at other.host
-#luser_relay = $local at other.host
-#luser_relay = admin+$local
-
-# JUNK MAIL CONTROLS
-#
-# The controls listed here are only a very small subset. The file
-# SMTPD_ACCESS_README provides an overview.
-
-# The header_checks parameter specifies an optional table with patterns
-# that each logical message header is matched against, including
-# headers that span multiple physical lines.
-#
-# By default, these patterns also apply to MIME headers and to the
-# headers of attached messages. With older Postfix versions, MIME and
-# attached message headers were treated as body text.
-#
-# For details, see "man header_checks".
-#
-#header_checks = regexp:/etc/postfix/header_checks
-
-# FAST ETRN SERVICE
-#
-# Postfix maintains per-destination logfiles with information about
-# deferred mail, so that mail can be flushed quickly with the SMTP
-# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
-# See the ETRN_README document for a detailed description.
-#
-# The fast_flush_domains parameter controls what destinations are
-# eligible for this service. By default, they are all domains that
-# this server is willing to relay mail to.
-#
-#fast_flush_domains = $relay_domains
-
-# SHOW SOFTWARE VERSION OR NOT
-#
-# The smtpd_banner parameter specifies the text that follows the 220
-# code in the SMTP server's greeting banner. Some people like to see
-# the mail version advertised. By default, Postfix shows no version.
-#
-# You MUST specify $myhostname at the start of the text. That is an
-# RFC requirement. Postfix itself does not care.
-#
-#smtpd_banner = $myhostname ESMTP $mail_name
-#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
-
-# PARALLEL DELIVERY TO THE SAME DESTINATION
-#
-# How many parallel deliveries to the same user or domain? With local
-# delivery, it does not make sense to do massively parallel delivery
-# to the same user, because mailbox updates must happen sequentially,
-# and expensive pipelines in .forward files can cause disasters when
-# too many are run at the same time. With SMTP deliveries, 10
-# simultaneous connections to the same domain could be sufficient to
-# raise eyebrows.
-#
-# Each message delivery transport has its XXX_destination_concurrency_limit
-# parameter. The default is $default_destination_concurrency_limit for
-# most delivery transports. For the local delivery agent the default is 2.
-
-#local_destination_concurrency_limit = 2
-#default_destination_concurrency_limit = 20
-
-# DEBUGGING CONTROL
-#
-# The debug_peer_level parameter specifies the increment in verbose
-# logging level when an SMTP client or server host name or address
-# matches a pattern in the debug_peer_list parameter.
-#
-debug_peer_level = 2
-
-# The debug_peer_list parameter specifies an optional list of domain
-# or network patterns, /file/name patterns or type:name tables. When
-# an SMTP client or server host name or address matches a pattern,
-# increase the verbose logging level by the amount specified in the
-# debug_peer_level parameter.
-#
-#debug_peer_list = 127.0.0.1
-#debug_peer_list = some.domain
-
-# The debugger_command specifies the external command that is executed
-# when a Postfix daemon program is run with the -D option.
-#
-# Use "command .. & sleep 5" so that the debugger can attach before
-# the process marches on. If you use an X-based debugger, be sure to
-# set up your XAUTHORITY environment variable before starting Postfix.
-#
-debugger_command =
- PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
- ddd $daemon_directory/$process_name $process_id & sleep 5
-
-# If you can't use X, use this to capture the call stack when a
-# daemon crashes. The result is in a file in the configuration
-# directory, and is named after the process name and the process ID.
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
-# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
-# >$config_directory/$process_name.$process_id.log & sleep 5
-#
-# Another possibility is to run gdb under a detached screen session.
-# To attach to the screen sesssion, su root and run "screen -r
-# <id_string>" where <id_string> uniquely matches one of the detached
-# sessions (from "screen -list").
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
-# -dmS $process_name gdb $daemon_directory/$process_name
-# $process_id & sleep 1
-
-# INSTALL-TIME CONFIGURATION INFORMATION
-#
-# The following parameters are used when installing a new Postfix version.
-#
-# sendmail_path: The full pathname of the Postfix sendmail command.
-# This is the Sendmail-compatible mail posting interface.
-#
-sendmail_path = /usr/sbin/sendmail.postfix
-
-# newaliases_path: The full pathname of the Postfix newaliases command.
-# This is the Sendmail-compatible command to build alias databases.
-#
-newaliases_path = /usr/bin/newaliases.postfix
-
-# mailq_path: The full pathname of the Postfix mailq command. This
-# is the Sendmail-compatible mail queue listing command.
-#
-mailq_path = /usr/bin/mailq.postfix
-
-# setgid_group: The group for mail submission and queue management
-# commands. This must be a group name with a numerical group ID that
-# is not shared with other accounts, not even with the Postfix account.
-#
-setgid_group = postdrop
-
-# html_directory: The location of the Postfix HTML documentation.
-#
-html_directory = no
-
-# manpage_directory: The location of the Postfix on-line manual pages.
-#
-manpage_directory = /usr/share/man
-
-# sample_directory: The location of the Postfix sample configuration files.
-# This parameter is obsolete as of Postfix 2.1.
-#
-sample_directory = /usr/share/doc/postfix-2.5.6/samples
-
-# readme_directory: The location of the Postfix README files.
-#
-readme_directory = /usr/share/doc/postfix-2.5.6/README_FILES
-# Enable IPv4, and IPv6 if supported
-inet_protocols = all
-
-# mapping so we know where to go for .redhat.com mail
-
-transport_maps = hash:/etc/postfix/transport
-local_header_rewrite_clients = static:all
-
-
diff --git a/modules/postfix/files/main.cf/main.cf.external b/modules/postfix/files/main.cf/main.cf.external
deleted file mode 100644
index 0e502d2..0000000
--- a/modules/postfix/files/main.cf/main.cf.external
+++ /dev/null
@@ -1,685 +0,0 @@
-# "false"
-# Global Postfix configuration file. This file lists only a subset
-# of all parameters. For the syntax, and for a complete parameter
-# list, see the postconf(5) manual page (command: "man 5 postconf").
-#
-# For common configuration examples, see BASIC_CONFIGURATION_README
-# and STANDARD_CONFIGURATION_README. To find these documents, use
-# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
-#
-# For best results, change no more than 2-3 parameters at a time,
-# and test if Postfix still works after every change.
-
-# SOFT BOUNCE
-#
-# The soft_bounce parameter provides a limited safety net for
-# testing. When soft_bounce is enabled, mail will remain queued that
-# would otherwise bounce. This parameter disables locally-generated
-# bounces, and prevents the SMTP server from rejecting mail permanently
-# (by changing 5xx replies into 4xx replies). However, soft_bounce
-# is no cure for address rewriting mistakes or mail routing mistakes.
-#
-#soft_bounce = no
-
-# LOCAL PATHNAME INFORMATION
-#
-# The queue_directory specifies the location of the Postfix queue.
-# This is also the root directory of Postfix daemons that run chrooted.
-# See the files in examples/chroot-setup for setting up Postfix chroot
-# environments on different UNIX systems.
-#
-queue_directory = /var/spool/postfix
-
-# The command_directory parameter specifies the location of all
-# postXXX commands.
-#
-command_directory = /usr/sbin
-
-# The daemon_directory parameter specifies the location of all Postfix
-# daemon programs (i.e. programs listed in the master.cf file). This
-# directory must be owned by root.
-#
-daemon_directory = /usr/libexec/postfix
-
-# QUEUE AND PROCESS OWNERSHIP
-#
-# The mail_owner parameter specifies the owner of the Postfix queue
-# and of most Postfix daemon processes. Specify the name of a user
-# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
-# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
-# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
-# USER.
-#
-mail_owner = postfix
-
-# The default_privs parameter specifies the default rights used by
-# the local delivery agent for delivery to external file or command.
-# These rights are used in the absence of a recipient user context.
-# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
-#
-#default_privs = nobody
-
-# INTERNET HOST AND DOMAIN NAMES
-#
-# The myhostname parameter specifies the internet hostname of this
-# mail system. The default is to use the fully-qualified domain name
-# from gethostname(). $myhostname is used as a default value for many
-# other configuration parameters.
-#
-#myhostname = host.domain.tld
-#myhostname = virtual.domain.tld
-
-# The mydomain parameter specifies the local internet domain name.
-# The default is to use $myhostname minus the first component.
-# $mydomain is used as a default value for many other configuration
-# parameters.
-#
-#mydomain = domain.tld
-
-# SENDING MAIL
-#
-# The myorigin parameter specifies the domain that locally-posted
-# mail appears to come from. The default is to append $myhostname,
-# which is fine for small sites. If you run a domain with multiple
-# machines, you should (1) change this to $mydomain and (2) set up
-# a domain-wide alias database that aliases each user to
-# user at that.users.mailhost.
-#
-# For the sake of consistency between sender and recipient addresses,
-# myorigin also specifies the default domain name that is appended
-# to recipient addresses that have no @domain part.
-#
-#myorigin = $myhostname
-#myorigin = $mydomain
-
-mydomain = fedoraproject.org
-myorigin = fedoraproject.org
-
-# RECEIVING MAIL
-
-# The inet_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on. By default,
-# the software claims all active interfaces on the machine. The
-# parameter also controls delivery of mail to user@[ip.address].
-#
-# See also the proxy_interfaces parameter, for network addresses that
-# are forwarded to us via a proxy or network address translator.
-#
-# Note: you need to stop/start Postfix when this parameter changes.
-#
-#inet_interfaces = all
-#inet_interfaces = $myhostname
-#inet_interfaces = $myhostname, localhost
-inet_interfaces = all
-
-# The proxy_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on by way of a
-# proxy or network address translation unit. This setting extends
-# the address list specified with the inet_interfaces parameter.
-#
-# You must specify your proxy/NAT addresses when your system is a
-# backup MX host for other domains, otherwise mail delivery loops
-# will happen when the primary MX host is down.
-#
-#proxy_interfaces =
-#proxy_interfaces = 1.2.3.4
-
-# The mydestination parameter specifies the list of domains that this
-# machine considers itself the final destination for.
-#
-# These domains are routed to the delivery agent specified with the
-# local_transport parameter setting. By default, that is the UNIX
-# compatible delivery agent that lookups all recipients in /etc/passwd
-# and /etc/aliases or their equivalent.
-#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
-#
-# Do not specify the names of virtual domains - those domains are
-# specified elsewhere (see VIRTUAL_README).
-#
-# Do not specify the names of domains that this machine is backup MX
-# host for. Specify those names via the relay_domains settings for
-# the SMTP server, or use permit_mx_backup if you are lazy (see
-# STANDARD_CONFIGURATION_README).
-#
-# The local machine is always the final destination for mail addressed
-# to user@[the.net.work.address] of an interface that the mail system
-# receives mail on (see the inet_interfaces parameter).
-#
-# Specify a list of host or domain names, /file/name or type:table
-# patterns, separated by commas and/or whitespace. A /file/name
-# pattern is replaced by its contents; a type:table is matched when
-# a name matches a lookup key (the right-hand side is ignored).
-# Continue long lines by starting the next line with whitespace.
-#
-# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
-#
-mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
-# mail.$mydomain, www.$mydomain, ftp.$mydomain
-
-# REJECTING MAIL FOR UNKNOWN LOCAL USERS
-#
-# The local_recipient_maps parameter specifies optional lookup tables
-# with all names or addresses of users that are local with respect
-# to $mydestination, $inet_interfaces or $proxy_interfaces.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown local users. This parameter is defined by default.
-#
-# To turn off local recipient checking in the SMTP server, specify
-# local_recipient_maps = (i.e. empty).
-#
-# The default setting assumes that you use the default Postfix local
-# delivery agent for local delivery. You need to update the
-# local_recipient_maps setting if:
-#
-# - You define $mydestination domain recipients in files other than
-# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
-# For example, you define $mydestination domain recipients in
-# the $virtual_mailbox_maps files.
-#
-# - You redefine the local delivery agent in master.cf.
-#
-# - You redefine the "local_transport" setting in main.cf.
-#
-# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
-# feature of the Postfix local delivery agent (see local(8)).
-#
-# Details are described in the LOCAL_RECIPIENT_README file.
-#
-# Beware: if the Postfix SMTP server runs chrooted, you probably have
-# to access the passwd file via the proxymap service, in order to
-# overcome chroot restrictions. The alternative, having a copy of
-# the system passwd file in the chroot jail is just not practical.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify a bare username, an @domain.tld
-# wild-card, or specify a user at domain.tld address.
-#
-#local_recipient_maps = unix:passwd.byname $alias_maps
-#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
-#local_recipient_maps =
-
-# The unknown_local_recipient_reject_code specifies the SMTP server
-# response code when a recipient domain matches $mydestination or
-# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
-# and the recipient address or address local-part is not found.
-#
-# The default setting is 550 (reject mail) but it is safer to start
-# with 450 (try again later) until you are certain that your
-# local_recipient_maps settings are OK.
-#
-unknown_local_recipient_reject_code = 550
-
-# TRUST AND RELAY CONTROL
-
-# The mynetworks parameter specifies the list of "trusted" SMTP
-# clients that have more privileges than "strangers".
-#
-# In particular, "trusted" SMTP clients are allowed to relay mail
-# through Postfix. See the smtpd_recipient_restrictions parameter
-# in postconf(5).
-#
-# You can specify the list of "trusted" network addresses by hand
-# or you can let Postfix do it for you (which is the default).
-#
-# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
-# clients in the same IP subnetworks as the local machine.
-# On Linux, this does works correctly only with interfaces specified
-# with the "ifconfig" command.
-#
-# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
-# clients in the same IP class A/B/C networks as the local machine.
-# Don't do this with a dialup site - it would cause Postfix to "trust"
-# your entire provider's network. Instead, specify an explicit
-# mynetworks list by hand, as described below.
-#
-# Specify "mynetworks_style = host" when Postfix should "trust"
-# only the local machine.
-#
-#mynetworks_style = class
-#mynetworks_style = subnet
-#mynetworks_style = host
-
-# Alternatively, you can specify the mynetworks list by hand, in
-# which case Postfix ignores the mynetworks_style setting.
-#
-# Specify an explicit list of network/netmask patterns, where the
-# mask specifies the number of bits in the network part of a host
-# address.
-#
-# You can also specify the absolute pathname of a pattern file instead
-# of listing the patterns here. Specify type:table for table-based lookups
-# (the value on the table right-hand side is not used).
-#
-#mynetworks = 168.100.189.0/28, 127.0.0.0/8
-#mynetworks = $config_directory/mynetworks
-#mynetworks = hash:/etc/postfix/network_table
-
-
-# The relay_domains parameter restricts what destinations this system will
-# relay mail to. See the smtpd_recipient_restrictions description in
-# postconf(5) for detailed information.
-#
-# By default, Postfix relays mail
-# - from "trusted" clients (IP address matches $mynetworks) to any destination,
-# - from "untrusted" clients to destinations that match $relay_domains or
-# subdomains thereof, except addresses with sender-specified routing.
-# The default relay_domains value is $mydestination.
-#
-# In addition to the above, the Postfix SMTP server by default accepts mail
-# that Postfix is final destination for:
-# - destinations that match $inet_interfaces or $proxy_interfaces,
-# - destinations that match $mydestination
-# - destinations that match $virtual_alias_domains,
-# - destinations that match $virtual_mailbox_domains.
-# These destinations do not need to be listed in $relay_domains.
-#
-# Specify a list of hosts or domains, /file/name patterns or type:name
-# lookup tables, separated by commas and/or whitespace. Continue
-# long lines by starting the next line with whitespace. A file name
-# is replaced by its contents; a type:name table is matched when a
-# (parent) domain appears as lookup key.
-#
-# NOTE: Postfix will not automatically forward mail for domains that
-# list this system as their primary or backup MX host. See the
-# permit_mx_backup restriction description in postconf(5).
-#
-#relay_domains = $mydestination
-
-
-
-# INTERNET OR INTRANET
-
-# The relayhost parameter specifies the default host to send mail to
-# when no entry is matched in the optional transport(5) table. When
-# no relayhost is given, mail is routed directly to the destination.
-#
-# On an intranet, specify the organizational domain name. If your
-# internal DNS uses no MX records, specify the name of the intranet
-# gateway host instead.
-#
-# In the case of SMTP, specify a domain, host, host:port, [host]:port,
-# [address] or [address]:port; the form [host] turns off MX lookups.
-#
-# If you're connected via UUCP, see also the default_transport parameter.
-#
-#relayhost = $mydomain
-#relayhost = [gateway.my.domain]
-#relayhost = [mailserver.isp.tld]
-#relayhost = uucphost
-#relayhost = [an.ip.add.ress]
-relayhost =
-
-
-# REJECTING UNKNOWN RELAY USERS
-#
-# The relay_recipient_maps parameter specifies optional lookup tables
-# with all addresses in the domains that match $relay_domains.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown relay users. This feature is off by default.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify an @domain.tld wild-card, or specify
-# a user at domain.tld address.
-#
-#relay_recipient_maps = hash:/etc/postfix/relay_recipients
-
-# INPUT RATE CONTROL
-#
-# The in_flow_delay configuration parameter implements mail input
-# flow control. This feature is turned on by default, although it
-# still needs further development (it's disabled on SCO UNIX due
-# to an SCO bug).
-#
-# A Postfix process will pause for $in_flow_delay seconds before
-# accepting a new message, when the message arrival rate exceeds the
-# message delivery rate. With the default 100 SMTP server process
-# limit, this limits the mail inflow to 100 messages a second more
-# than the number of messages delivered per second.
-#
-# Specify 0 to disable the feature. Valid delays are 0..10.
-#
-#in_flow_delay = 1s
-
-# ADDRESS REWRITING
-#
-# The ADDRESS_REWRITING_README document gives information about
-# address masquerading or other forms of address rewriting including
-# username->Firstname.Lastname mapping.
-
-masquerade_domains = redhat.com
-masquerade_exceptions = root apache
-
-# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
-#
-# The VIRTUAL_README document gives information about the many forms
-# of domain hosting that Postfix supports.
-
-# "USER HAS MOVED" BOUNCE MESSAGES
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# TRANSPORT MAP
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# ALIAS DATABASE
-#
-# The alias_maps parameter specifies the list of alias databases used
-# by the local delivery agent. The default list is system dependent.
-#
-# On systems with NIS, the default is to search the local alias
-# database, then the NIS alias database. See aliases(5) for syntax
-# details.
-#
-# If you change the alias database, run "postalias /etc/aliases" (or
-# wherever your system stores the mail alias file), or simply run
-# "newaliases" to build the necessary DBM or DB file.
-#
-# It will take a minute or so before changes become visible. Use
-# "postfix reload" to eliminate the delay.
-#
-#alias_maps = dbm:/etc/aliases
-alias_maps = hash:/etc/aliases
-#alias_maps = hash:/etc/aliases, nis:mail.aliases
-#alias_maps = netinfo:/aliases
-
-# The alias_database parameter specifies the alias database(s) that
-# are built with "newaliases" or "sendmail -bi". This is a separate
-# configuration parameter, because alias_maps (see above) may specify
-# tables that are not necessarily all under control by Postfix.
-#
-#alias_database = dbm:/etc/aliases
-#alias_database = dbm:/etc/mail/aliases
-alias_database = hash:/etc/aliases
-#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
-
-# ADDRESS EXTENSIONS (e.g., user+foo)
-#
-# The recipient_delimiter parameter specifies the separator between
-# user names and address extensions (user+foo). See canonical(5),
-# local(8), relocated(5) and virtual(5) for the effects this has on
-# aliases, canonical, virtual, relocated and .forward file lookups.
-# Basically, the software tries user+foo and .forward+foo before
-# trying user and .forward.
-#
-recipient_delimiter = +
-
-# DELIVERY TO MAILBOX
-#
-# The home_mailbox parameter specifies the optional pathname of a
-# mailbox file relative to a user's home directory. The default
-# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
-# "Maildir/" for qmail-style delivery (the / is required).
-#
-#home_mailbox = Mailbox
-#home_mailbox = Maildir/
-
-# The mail_spool_directory parameter specifies the directory where
-# UNIX-style mailboxes are kept. The default setting depends on the
-# system type.
-#
-#mail_spool_directory = /var/mail
-#mail_spool_directory = /var/spool/mail
-
-# The mailbox_command parameter specifies the optional external
-# command to use instead of mailbox delivery. The command is run as
-# the recipient with proper HOME, SHELL and LOGNAME environment settings.
-# Exception: delivery for root is done as $default_user.
-#
-# Other environment variables of interest: USER (recipient username),
-# EXTENSION (address extension), DOMAIN (domain part of address),
-# and LOCAL (the address localpart).
-#
-# Unlike other Postfix configuration parameters, the mailbox_command
-# parameter is not subjected to $parameter substitutions. This is to
-# make it easier to specify shell syntax (see example below).
-#
-# Avoid shell meta characters because they will force Postfix to run
-# an expensive shell process. Procmail alone is expensive enough.
-#
-# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
-# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
-#
-mailbox_command = /usr/bin/procmail
-#mailbox_command = /some/where/procmail -a "$EXTENSION"
-
-# The mailbox_transport specifies the optional transport in master.cf
-# to use after processing aliases and .forward files. This parameter
-# has precedence over the mailbox_command, fallback_transport and
-# luser_relay parameters.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-
-# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
-# server using LMTP (Local Mail Transport Protocol), this is prefered
-# over the older cyrus deliver program by setting the
-# mailbox_transport as below:
-#
-# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-#
-# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
-# these settings.
-#
-# local_destination_recipient_limit = 300
-# local_destination_concurrency_limit = 5
-#
-# Of course you should adjust these settings as appropriate for the
-# capacity of the hardware you are using. The recipient limit setting
-# can be used to take advantage of the single instance message store
-# capability of Cyrus. The concurrency limit can be used to control
-# how many simultaneous LMTP sessions will be permitted to the Cyrus
-# message store.
-#
-# To use the old cyrus deliver program you have to set:
-#mailbox_transport = cyrus
-
-# The fallback_transport specifies the optional transport in master.cf
-# to use for recipients that are not found in the UNIX passwd database.
-# This parameter has precedence over the luser_relay parameter.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
-#fallback_transport =
-
-#transport_maps = hash:/etc/postfix/transport
-# The luser_relay parameter specifies an optional destination address
-# for unknown recipients. By default, mail for unknown@$mydestination,
-# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
-# as undeliverable.
-#
-# The following expansions are done on luser_relay: $user (recipient
-# username), $shell (recipient shell), $home (recipient home directory),
-# $recipient (full recipient address), $extension (recipient address
-# extension), $domain (recipient domain), $local (entire recipient
-# localpart), $recipient_delimiter. Specify ${name?value} or
-# ${name:value} to expand value only when $name does (does not) exist.
-#
-# luser_relay works only for the default Postfix local delivery agent.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must specify "local_recipient_maps =" (i.e. empty) in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#luser_relay = $user at other.host
-#luser_relay = $local at other.host
-#luser_relay = admin+$local
-
-# JUNK MAIL CONTROLS
-#
-# The controls listed here are only a very small subset. The file
-# SMTPD_ACCESS_README provides an overview.
-
-# The header_checks parameter specifies an optional table with patterns
-# that each logical message header is matched against, including
-# headers that span multiple physical lines.
-#
-# By default, these patterns also apply to MIME headers and to the
-# headers of attached messages. With older Postfix versions, MIME and
-# attached message headers were treated as body text.
-#
-# For details, see "man header_checks".
-#
-header_checks = regexp:/etc/postfix/header_checks
-
-# FAST ETRN SERVICE
-#
-# Postfix maintains per-destination logfiles with information about
-# deferred mail, so that mail can be flushed quickly with the SMTP
-# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
-# See the ETRN_README document for a detailed description.
-#
-# The fast_flush_domains parameter controls what destinations are
-# eligible for this service. By default, they are all domains that
-# this server is willing to relay mail to.
-#
-#fast_flush_domains = $relay_domains
-
-# SHOW SOFTWARE VERSION OR NOT
-#
-# The smtpd_banner parameter specifies the text that follows the 220
-# code in the SMTP server's greeting banner. Some people like to see
-# the mail version advertised. By default, Postfix shows no version.
-#
-# You MUST specify $myhostname at the start of the text. That is an
-# RFC requirement. Postfix itself does not care.
-#
-#smtpd_banner = $myhostname ESMTP $mail_name
-#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
-
-# PARALLEL DELIVERY TO THE SAME DESTINATION
-#
-# How many parallel deliveries to the same user or domain? With local
-# delivery, it does not make sense to do massively parallel delivery
-# to the same user, because mailbox updates must happen sequentially,
-# and expensive pipelines in .forward files can cause disasters when
-# too many are run at the same time. With SMTP deliveries, 10
-# simultaneous connections to the same domain could be sufficient to
-# raise eyebrows.
-#
-# Each message delivery transport has its XXX_destination_concurrency_limit
-# parameter. The default is $default_destination_concurrency_limit for
-# most delivery transports. For the local delivery agent the default is 2.
-
-#local_destination_concurrency_limit = 2
-#default_destination_concurrency_limit = 20
-
-# DEBUGGING CONTROL
-#
-# The debug_peer_level parameter specifies the increment in verbose
-# logging level when an SMTP client or server host name or address
-# matches a pattern in the debug_peer_list parameter.
-#
-debug_peer_level = 2
-
-# The debug_peer_list parameter specifies an optional list of domain
-# or network patterns, /file/name patterns or type:name tables. When
-# an SMTP client or server host name or address matches a pattern,
-# increase the verbose logging level by the amount specified in the
-# debug_peer_level parameter.
-#
-#debug_peer_list = 127.0.0.1
-#debug_peer_list = some.domain
-
-# The debugger_command specifies the external command that is executed
-# when a Postfix daemon program is run with the -D option.
-#
-# Use "command .. & sleep 5" so that the debugger can attach before
-# the process marches on. If you use an X-based debugger, be sure to
-# set up your XAUTHORITY environment variable before starting Postfix.
-#
-debugger_command =
- PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
- xxgdb $daemon_directory/$process_name $process_id & sleep 5
-
-# If you can't use X, use this to capture the call stack when a
-# daemon crashes. The result is in a file in the configuration
-# directory, and is named after the process name and the process ID.
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
-# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
-# >$config_directory/$process_name.$process_id.log & sleep 5
-#
-# Another possibility is to run gdb under a detached screen session.
-# To attach to the screen sesssion, su root and run "screen -r
-# <id_string>" where <id_string> uniquely matches one of the detached
-# sessions (from "screen -list").
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
-# -dmS $process_name gdb $daemon_directory/$process_name
-# $process_id & sleep 1
-
-# INSTALL-TIME CONFIGURATION INFORMATION
-#
-# The following parameters are used when installing a new Postfix version.
-#
-# sendmail_path: The full pathname of the Postfix sendmail command.
-# This is the Sendmail-compatible mail posting interface.
-#
-sendmail_path = /usr/sbin/sendmail.postfix
-
-# newaliases_path: The full pathname of the Postfix newaliases command.
-# This is the Sendmail-compatible command to build alias databases.
-#
-newaliases_path = /usr/bin/newaliases.postfix
-
-# mailq_path: The full pathname of the Postfix mailq command. This
-# is the Sendmail-compatible mail queue listing command.
-#
-mailq_path = /usr/bin/mailq.postfix
-
-# setgid_group: The group for mail submission and queue management
-# commands. This must be a group name with a numerical group ID that
-# is not shared with other accounts, not even with the Postfix account.
-#
-setgid_group = postdrop
-
-# html_directory: The location of the Postfix HTML documentation.
-#
-html_directory = no
-
-# manpage_directory: The location of the Postfix on-line manual pages.
-#
-manpage_directory = /usr/share/man
-
-# sample_directory: The location of the Postfix sample configuration files.
-# This parameter is obsolete as of Postfix 2.1.
-#
-sample_directory = /usr/share/doc/postfix-2.4.5/samples
-
-# readme_directory: The location of the Postfix README files.
-#
-readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES
-
-# add this to new postfix to get it to add proper message-id and other
-# headers to outgoing emails via the gateway.
-
-
diff --git a/modules/postfix/files/main.cf/main.cf.gateway b/modules/postfix/files/main.cf/main.cf.gateway
new file mode 100644
index 0000000..f0b52de
--- /dev/null
+++ b/modules/postfix/files/main.cf/main.cf.gateway
@@ -0,0 +1,704 @@
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# Custom rules
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/libexec/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+
+smtp_helo_name = bastion.fedoraproject.org
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+mydomain = fedoraproject.org
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user at that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+myorigin = fedoraproject.org
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+inet_interfaces = all
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+
+mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost , $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user at domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+local_recipient_maps = $alias_maps hash:/etc/postfix/relay_recipient_maps
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+mynetworks = localhost.localdomain, localhost, 127.0.0.1, 10.5.125.0/24, 10.5.126.0/24, 10.5.127.0/24, 192.168.0.0/16
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+relay_domains = $mydestination fedora.phx.redhat.com
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user at domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+alias_maps = hash:/etc/aliases
+alias_maps = hash:/etc/aliases, hash:/etc/postfix/package-owner
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+
+# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
+# server using LMTP (Local Mail Transport Protocol), this is prefered
+# over the older cyrus deliver program by setting the
+# mailbox_transport as below:
+#
+# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+#
+# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
+# these settings.
+#
+# local_destination_recipient_limit = 300
+# local_destination_concurrency_limit = 5
+#
+# Of course you should adjust these settings as appropriate for the
+# capacity of the hardware you are using. The recipient limit setting
+# can be used to take advantage of the single instance message store
+# capability of Cyrus. The concurrency limit can be used to control
+# how many simultaneous LMTP sessions will be permitted to the Cyrus
+# message store.
+#
+# To use the old cyrus deliver program you have to set:
+#mailbox_transport = cyrus
+
+
+mailbox_transport = lmtp:10.5.126.73:2003
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user at other.host
+#luser_relay = $local at other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail.postfix
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases.postfix
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq.postfix
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = no
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /usr/share/doc/postfix-2.5.6/samples
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.5.6/README_FILES
+# Enable IPv4, and IPv6 if supported
+inet_protocols = all
+
+# mapping so we know where to go for .redhat.com mail
+
+transport_maps = hash:/etc/postfix/transport
+local_header_rewrite_clients = static:all
+
+
diff --git a/modules/postfix/files/main.cf/main.cf.phx b/modules/postfix/files/main.cf/main.cf.phx
new file mode 100644
index 0000000..1707639
--- /dev/null
+++ b/modules/postfix/files/main.cf/main.cf.phx
@@ -0,0 +1,685 @@
+# "false"
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/libexec/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user at that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+mydomain = fedoraproject.org
+myorigin = fedoraproject.org
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+inet_interfaces = all
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user at domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+relayhost = bastion
+
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user at domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+masquerade_domains = redhat.com
+masquerade_exceptions = root apache
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+mailbox_command = /usr/bin/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+
+# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
+# server using LMTP (Local Mail Transport Protocol), this is prefered
+# over the older cyrus deliver program by setting the
+# mailbox_transport as below:
+#
+# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+#
+# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
+# these settings.
+#
+# local_destination_recipient_limit = 300
+# local_destination_concurrency_limit = 5
+#
+# Of course you should adjust these settings as appropriate for the
+# capacity of the hardware you are using. The recipient limit setting
+# can be used to take advantage of the single instance message store
+# capability of Cyrus. The concurrency limit can be used to control
+# how many simultaneous LMTP sessions will be permitted to the Cyrus
+# message store.
+#
+# To use the old cyrus deliver program you have to set:
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
+#fallback_transport =
+
+#transport_maps = hash:/etc/postfix/transport
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user at other.host
+#luser_relay = $local at other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ xxgdb $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail.postfix
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases.postfix
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq.postfix
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = no
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /usr/share/doc/postfix-2.4.5/samples
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES
+
+# add this to new postfix to get it to add proper message-id and other
+# headers to outgoing emails via the gateway.
+
+
diff --git a/modules/postfix/files/master.cf/master.cf b/modules/postfix/files/master.cf/master.cf
new file mode 100644
index 0000000..d6aec25
--- /dev/null
+++ b/modules/postfix/files/master.cf/master.cf
@@ -0,0 +1,96 @@
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd
+#submission inet n - n - - smtpd
+# -o smtpd_enforce_tls=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# The Cyrus deliver program has changed incompatibly, multiple times.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
+
diff --git a/modules/postfix/files/master.cf/master.cf.hosted01 b/modules/postfix/files/master.cf/master.cf.hosted01
new file mode 100644
index 0000000..10d6c23
--- /dev/null
+++ b/modules/postfix/files/master.cf/master.cf.hosted01
@@ -0,0 +1,98 @@
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd -o content_filter=spamassassin
+#submission inet n - n - - smtpd
+# -o smtpd_enforce_tls=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# The Cyrus deliver program has changed incompatibly, multiple times.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
+
+spamassassin unix - n n - - pipe user=spammy argv=/usr/bin/spamc -e /usr/sbin/sendmail.postfix -oi -f ${sender} ${recipient}
+
diff --git a/modules/postfix/files/master.cf/master.cf.value b/modules/postfix/files/master.cf/master.cf.value
new file mode 100644
index 0000000..3800ecc
--- /dev/null
+++ b/modules/postfix/files/master.cf/master.cf.value
@@ -0,0 +1,100 @@
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd
+#submission inet n - n - - smtpd
+# -o smtpd_enforce_tls=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+smtps inet n - n - - smtpd
+ -o smtpd_tls_wrappermode=yes
+ -o smtpd_sasl_auth_enable=yes
+ -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# The Cyrus deliver program has changed incompatibly, multiple times.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
+
diff --git a/modules/postfix/manifests/init.pp b/modules/postfix/manifests/init.pp
index 0014122..72513e1 100644
--- a/modules/postfix/manifests/init.pp
+++ b/modules/postfix/manifests/init.pp
@@ -2,41 +2,11 @@
class postfix::server {
# back port to work with new master.cf file
-
- $smtps=false
+ # AFAICT THIS IS NOT USED AT ALL
package { postfix:
ensure => present
}
- if $isRelayGateway {
- $notRelayGateway = ''
- } else {
- $isRelayGateway = false
- }
-
- if $relayHost {
- $notRelayHost = ''
- } else {
- $relayHost = 'bastion'
- }
-
- if $spamEnabled {
- $notSpamEnabled = ''
- } else {
- $spamEnabled = false
- }
-
- if $isMailmanSMTP {
- $notisMailmanSMTP = ''
- } else {
- $isMailmanSMTP = false
- }
- if $transport_maps {
- $transport_maps = ''
- } else {
- $transport_maps = 'hash:/etc/postfix/transport'
- }
-
service { postfix:
ensure => running,
enable => true,
@@ -44,13 +14,25 @@ class postfix::server {
}
file { '/etc/postfix/main.cf':
- content => template("postfix/main.cf.erb"),
+ source => [
+ "puppet:///postfix/main.cf/main.cf.$fqdn",
+ "puppet:///postfix/main.cf/main.cf.$hostname",
+ "puppet:///postfix/main.cf/main.cf.$postfix_group",
+ "puppet:///postfix/main.cf/main.cf.$datacenter",
+ "puppet:///postfix/main.cf/main.cf",
+ ],
mode => 0644,
notify => Service['postfix'],
require => Package['postfix']
}
file { '/etc/postfix/master.cf':
- content => template("postfix/master.cf.erb"),
+ source => [
+ "puppet:///postfix/master.cf/master.cf.$fqdn",
+ "puppet:///postfix/master.cf/master.cf.$hostname",
+ "puppet:///postfix/master.cf/master.cf.$postfix_group",
+ "puppet:///postfix/master.cf/master.cf.$datacenter",
+ "puppet:///postfix/master.cf/master.cf",
+ ],
mode => 0644,
notify => Service['postfix'],
require => Package['postfix']
@@ -58,26 +40,6 @@ class postfix::server {
}
-class postfix::relay_server inherits postfix::server {
- $isRelayGateway=1
-}
-
-class postfix::mailman_smtp inherits postfix::relay_server {
-
- file { '/etc/postfix/transports':
- source => 'puppet:///postfix/transports',
- owner => root,
- group => root,
- mode => 0644,
- notify => [ Service['postfix'], Exec['rebuild_transports']],
- require => Package['postfix'],
- }
- exec { rebuild_transports:
- command => '/usr/sbin/postmap /etc/postfix/transport',
- refreshonly => true
- }
-}
-
define postfix::transport () {
file { "/etc/postfix/transport":
source => "puppet:///postfix/$name",
@@ -91,29 +53,6 @@ define postfix::transport () {
}
define postfix::postfix (
- $myhostname='',
- $mydomain='',
- $myorigin='',
- $inet_interfaces='',
- $mydestination='',
- $mynetworks_style='',
- $mynetworks='',
- $relay_domains='',
- $relayhost='',
- $transport_maps='',
- $alias_maps='hash:/etc/aliases',
- $smtp_helo_name='$myhostname',
- $mailbox_transport='',
- $custom='',
- $smtps=false,
- $local_recipient_maps=''
- ) {
-
- if $spamEnabled {
- $notSpamEnabled = ''
- } else {
- $spamEnabled = false
- }
package { postfix:
ensure => present
@@ -126,14 +65,25 @@ define postfix::postfix (
}
file { '/etc/postfix/main.cf':
- content => template("postfix/main.cf.default.erb"),
+ source => [
+ "puppet:///postfix/main.cf/main.cf.$fqdn",
+ "puppet:///postfix/main.cf/main.cf.$hostname",
+ "puppet:///postfix/main.cf/main.cf.$postfix_group",
+ "puppet:///postfix/main.cf/main.cf.$datacenter",
+ "puppet:///postfix/main.cf/main.cf",
+ ],
mode => 0644,
notify => Service['postfix'],
require => Package['postfix']
}
-
file { '/etc/postfix/master.cf':
- content => template("postfix/master.cf.erb"),
+ source => [
+ "puppet:///postfix/master.cf/master.cf.$fqdn",
+ "puppet:///postfix/master.cf/master.cf.$hostname",
+ "puppet:///postfix/master.cf/master.cf.$postfix_group",
+ "puppet:///postfix/master.cf/master.cf.$datacenter",
+ "puppet:///postfix/master.cf/master.cf",
+ ],
mode => 0644,
notify => Service['postfix'],
require => Package['postfix']
--
1.7.2.1
More information about the infrastructure
mailing list