FYI: RIP: 0010:[<ffffffff8122f04f>] [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
Michał Piotrowski
mkkp4x4 at gmail.com
Thu Sep 23 11:06:25 UTC 2010
Hi,
I noticed this in my dmesg
general protection fault: 0000 [#2] SMP
last sysfs file: /sys/fs/ecryptfs/version
CPU 2
Modules linked in: cbc cryptd aes_x86_64 aes_generic ecb ecryptfs
smsc47m192 hwmon_vid coretemp nf_conntrack_netbios_ns ip6t_REJECT
nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 iTCO_wdt i2c_i801
iTCO_vendor_support serio_raw r8169 mii sata_sil i915 drm_kms_helper
drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
Pid: 18329, comm: flush-8:16 Tainted: G D
2.6.35.5-29.fc13.x86_64 #1 D945GCLF2/
RIP: 0010:[<ffffffff8122f04f>] [<ffffffff8122f04f>]
cfq_free_io_context+0x18/0x34
RSP: 0018:ffff88000d909d90 EFLAGS: 00010202
RAX: 00000001075550e9 RBX: 6b6b6b6b6b6b6b6b RCX: 0000000000000000
RDX: 00000001075550ec RSI: ffff880005bd0dd0 RDI: 0000000000000282
RBP: ffff88000d909da0 R08: ffff880040225340 R09: 0000000000000000
R10: ffff88000d909d90 R11: dead000000200200 R12: ffff880040225340
R13: ffff8800785a8688 R14: 0000000000000000 R15: ffff88007c800000
FS: 0000000000000000(0000) GS:ffff880005a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f96ea945c03 CR3: 0000000077ab7000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process flush-8:16 (pid: 18329, threadinfo ffff88000d908000, task
ffff8800785a8000)
Stack:
ffff880040225340 ffff8800785a8000 ffff88000d909dd0 ffffffff812263db
<0> ffffffff812263a6 ffff8800785a8000 ffff8800785a8688 ffff880040225340
<0> ffff88000d909e10 ffffffff812264e7 ffffffff81226492 ffff8800785a8688
Call Trace:
[<ffffffff812263db>] put_io_context+0x69/0x9c
[<ffffffff812263a6>] ? put_io_context+0x34/0x9c
[<ffffffff812264e7>] exit_io_context+0xa0/0xad
[<ffffffff81226492>] ? exit_io_context+0x4b/0xad
[<ffffffff810555a1>] do_exit+0x786/0x7ba
[<ffffffff810f9965>] ? bdi_start_fn+0x0/0xda
[<ffffffff8106aebc>] kthreadd+0x0/0x13a
[<ffffffff8100aaa4>] kernel_thread_helper+0x4/0x10
[<ffffffff814a1310>] ? restore_args+0x0/0x30
[<ffffffff8106ae1a>] ? kthread+0x0/0xa2
[<ffffffff8100aaa0>] ? kernel_thread_helper+0x0/0x10
Code: 81 e8 48 93 e8 ff 41 5a 5b 41 5c 41 5d 41 5e 41 5f c9 c3 55 48
89 e5 41 54 53 0f 1f 44 00 00 48 8b 5f 78 49 89 fc 48 85 db 74 17 <48>
8b 03 48 8d 73 b0 4c 89 e7 0f 18 08 e8 45 ff ff ff 48 8b 1b
RIP [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
RSP <ffff88000d909d90>
---[ end trace f5f95d6a4269a603 ]---
Fixing recursive fault but reboot is needed!
uname -a
Linux ozzy.pl 2.6.35.5-29.fc13.x86_64 #1 SMP Wed Sep 22 00:00:29 CEST
2010 x86_64 x86_64 x86_64 GNU/Linux
It's self compiled 2.6.35.5-29. I had not noticed this in earlier
versions. Full dmesg attached.
Regards,
Michal
-------------- next part --------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35.5-29.fc13.x86_64 (michal at ozzy.pl) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Sep 22 00:00:29 CEST 2010
Command line: ro root=UUID=0a3d18e7-9d53-499a-b572-feda3bafec21 quiet SYSFONT=latarcyrheb-sun16 LANG=pl_PL.UTF-8 KEYTABLE=pl2 nomodeset
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f534000 (usable)
BIOS-e820: 000000007f534000 - 000000007f53c000 (reserved)
BIOS-e820: 000000007f53c000 - 000000007f5cb000 (usable)
BIOS-e820: 000000007f5cb000 - 000000007f5cf000 (reserved)
BIOS-e820: 000000007f5cf000 - 000000007f660000 (usable)
BIOS-e820: 000000007f660000 - 000000007f6f0000 (ACPI NVS)
BIOS-e820: 000000007f6f0000 - 000000007f6f4000 (usable)
BIOS-e820: 000000007f6f4000 - 000000007f6ff000 (ACPI data)
BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f700 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-E0FFF write-protect
E1000-E7FFF uncachable
E8000-E8FFF write-protect
E9000-EFFFF uncachable
F0000-F0FFF write-protect
F1000-F7FFF uncachable
F8000-F8FFF write-protect
F9000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F800000 mask 0FF800000 uncachable
2 base 07F700000 mask 0FFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
total RAM covered: 2039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fe200] fe200
init_memory_mapping: 0000000000000000-000000007f700000
0000000000 - 007f600000 page 2M
007f600000 - 007f700000 page 4k
kernel direct mapping tables up to 7f700000 @ 8000-c000
RAMDISK: 37460000 - 37ff0000
ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
ACPI: RSDT 000000007f6fd038 00034 (v01 INTEL D945GLF2 000000AB 01000013)
ACPI: FACP 000000007f6fc000 00074 (v01 INTEL D945GLF2 000000AB MSFT 01000013)
ACPI: DSDT 000000007f6f7000 045EC (v01 INTEL D945GLF2 000000AB MSFT 01000013)
ACPI: FACS 000000007f6a3000 00040
ACPI: APIC 000000007f6f6000 00078 (v01 INTEL D945GLF2 000000AB MSFT 01000013)
ACPI: WDDT 000000007f6f5000 00040 (v01 INTEL D945GLF2 000000AB MSFT 01000013)
ACPI: MCFG 000000007f6f4000 0003C (v01 INTEL D945GLF2 000000AB MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f700000
Initmem setup node 0 0000000000000000-000000007f700000
NODE_DATA [0000000002a40180 - 0000000002a5517f]
bootmap [0000000002a56000 - 0000000002a65edf] pages 10
(12/32 early reservations) ==> bootmem [0000000000 - 007f700000]
#0 [0001000000 - 0002a3fab0] TEXT DATA BSS ==> [0001000000 - 0002a3fab0]
#1 [0037460000 - 0037ff0000] RAMDISK ==> [0037460000 - 0037ff0000]
#2 [0002a40000 - 0002a40159] BRK ==> [0002a40000 - 0002a40159]
#3 [000009d800 - 00000fe200] BIOS reserved ==> [000009d800 - 00000fe200]
#4 [00000fe200 - 00000fe210] MP-table mpf ==> [00000fe200 - 00000fe210]
#5 [00000fe250 - 0000100000] BIOS reserved ==> [00000fe250 - 0000100000]
#6 [00000fe210 - 00000fe250] MP-table mpc ==> [00000fe210 - 00000fe250]
#7 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#8 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#9 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#10 [0002a40180 - 0002a55180] NODE_DATA ==> [0002a40180 - 0002a55180]
#11 [0002a56000 - 0002a66000] BOOTMAP ==> [0002a56000 - 0002a66000]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880003400000-ffff880004ffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000001 -> 0x0000008f
0: 0x00000100 -> 0x0007f534
0: 0x0007f53c -> 0x0007f5cb
0: 0x0007f5cf -> 0x0007f660
0: 0x0007f6f0 -> 0x0007f6f4
0: 0x0007f6ff -> 0x0007f700
On node 0 totalpages: 521703
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3821 pages, LIFO batch:0
DMA32 zone: 7081 pages used for memmap
DMA32 zone: 510640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007f534000 - 000000007f53c000
PM: Registered nosave memory: 000000007f5cb000 - 000000007f5cf000
PM: Registered nosave memory: 000000007f660000 - 000000007f6f0000
PM: Registered nosave memory: 000000007f6f4000 - 000000007f6ff000
Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880005600000 s1927552 r8192 d22144 u2097152
pcpu-alloc: s1927552 r8192 d22144 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514461
Policy zone: DMA32
Kernel command line: ro root=UUID=0a3d18e7-9d53-499a-b572-feda3bafec21 quiet SYSFONT=latarcyrheb-sun16 LANG=pl_PL.UTF-8 KEYTABLE=pl2 nomodeset
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2010940k/2087936k available (4774k kernel code, 1124k absent, 75872k reserved, 7129k data, 2776k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU lockdep checking is enabled.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:33024 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
ODEBUG: 13 of 13 active objects replaced
Fast TSC calibration using PIT
Detected 1596.390 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.78 BogoMIPS (lpj=1596390)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21469 entries in 85 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
lockdep: fixing up alternatives.
Booting Node 0, Processors #1lockdep: fixing up alternatives.
#2lockdep: fixing up alternatives.
#3 Ok.
TSC synchronization [CPU#0 -> CPU#3]:
Measured 12 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 4 CPUs
Total of 4 processors activated (12767.56 BogoMIPS).
sizeof(vma)=184 bytes
sizeof(page)=56 bytes
sizeof(inode)=1168 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1600 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=240 bytes
sizeof(task_struct)=9208 bytes
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
Time: 0:37:22 Date: 09/22/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf0000000] (ignored)
pci 0000:00:02.0: reg 10: [mem 0x88300000-0x8837ffff]
pci 0000:00:02.0: reg 14: [io 0x30e0-0x30e7]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x87ffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x88380000-0x8839ffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f]
pci 0000:00:1d.7: reg 10: [mem 0x883a0000-0x883a03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.1: reg 10: [io 0x30d8-0x30df]
pci 0000:00:1f.1: reg 14: [io 0x30f4-0x30f7]
pci 0000:00:1f.1: reg 18: [io 0x30d0-0x30d7]
pci 0000:00:1f.1: reg 1c: [io 0x30f0-0x30f3]
pci 0000:00:1f.1: reg 20: [io 0x30b0-0x30bf]
pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
pci 0000:00:1f.2: reg 14: [io 0x30ec-0x30ef]
pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
pci 0000:00:1f.2: reg 1c: [io 0x30e8-0x30eb]
pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 18: [mem 0x88200000-0x88200fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0x88000000-0x8800ffff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff]
pci 0000:00:1c.0: bridge window [mem 0x88000000-0x880fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
pci 0000:04:00.0: reg 24: [mem 0x88100000-0x881003ff]
pci 0000:04:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x88100000-0x881fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff
reserve RAM buffer: 000000007f534000 - 000000007fffffff
reserve RAM buffer: 000000007f5cb000 - 000000007fffffff
reserve RAM buffer: 000000007f660000 - 000000007fffffff
reserve RAM buffer: 000000007f6f4000 - 000000007fffffff
reserve RAM buffer: 000000007f700000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [io 0x0500-0x053f] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0680-0x06ff] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:04:00.0: address space collision: [mem 0xfff80000-0xffffffff pref] conflicts with reserved [mem 0xf0000000-0xffffffff]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x88400000-0x885fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x88600000-0x887fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x88800000-0x889fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x88a00000-0x88bfffff 64bit pref]
pci 0000:00:1e.0: BAR 15: assigned [mem 0x88c00000-0x88cfffff pref]
pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x88020000-0x8803ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff]
pci 0000:00:1c.0: bridge window [mem 0x88000000-0x880fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02-02]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0x88400000-0x885fffff]
pci 0000:00:1c.2: bridge window [mem 0x88600000-0x887fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0x88800000-0x889fffff]
pci 0000:00:1c.3: bridge window [mem 0x88a00000-0x88bfffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0x88c00000-0x88c7ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x88100000-0x881fffff]
pci 0000:00:1e.0: bridge window [mem 0x88c00000-0x88cfffff pref]
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0x88200000-0x882fffff]
pci_bus 0000:01: resource 2 [mem 0x88000000-0x880fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x88400000-0x885fffff]
pci_bus 0000:02: resource 2 [mem 0x88600000-0x887fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0x88800000-0x889fffff]
pci_bus 0000:03: resource 2 [mem 0x88a00000-0x88bfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x88100000-0x881fffff]
pci_bus 0000:04: resource 2 [mem 0x88c00000-0x88cfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 5, 163840 bytes)
UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11840k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
audit: initializing netlink socket (disabled)
type=2000 audit(1285115845.005:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3950
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 5848 bytes left
cryptomgr_test used greatest stack depth: 5688 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x80000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30ec bmdma 0x30a0 irq 19
ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e8 bmdma 0x30a8 irq 19
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x883a0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35.5-29.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35.5-29.fc13.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35.5-29.fc13.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35.5-29.fc13.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35.5-29.fc13.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 10:249:608
rtc_cmos 00:03: setting system clock to 2010-09-22 00:37:25 UTC (1285115845)
Initalizing network drop monitor service
ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
ata4.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 2776k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1352k freed
Freeing unused kernel memory: 1756k freed
mknod used greatest stack depth: 5664 bytes left
mount used greatest stack depth: 5376 bytes left
dracut: dracut-005-3.fc13
udev: starting version 153
udevd used greatest stack depth: 5184 bytes left
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
async/2 used greatest stack depth: 3944 bytes left
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
sata_sil 0000:04:00.0: version 2.4
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
sata_sil 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
sata_sil 0000:04:00.0: Applying R_ERR on DMA activate FIS errata fix
scsi4 : sata_sil
scsi5 : sata_sil
scsi6 : sata_sil
scsi7 : sata_sil
ata5: SATA max UDMA/100 mmio m1024 at 0x88100000 tf 0x88100080 irq 21
ata6: SATA max UDMA/100 mmio m1024 at 0x88100000 tf 0x881000c0 irq 21
ata7: SATA max UDMA/100 mmio m1024 at 0x88100000 tf 0x88100280 irq 21
ata8: SATA max UDMA/100 mmio m1024 at 0x88100000 tf 0x881002c0 irq 21
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata5.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 310)
ata7: SATA link down (SStatus 0 SControl 310)
ata8: SATA link down (SStatus 0 SControl 310)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1285115849.897:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy file /etc/selinux/targeted/policy/policy.15: Nie ma takiego pliku ani katalogu
load_policy used greatest stack depth: 3120 bytes left
dracut: Switching root
udev: starting version 153
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xffffc9000927e000, 00:1c:c0:a9:43:20, XID 1c4000c0 IRQ 43
iTCO_vendor_support: vendor-support=0
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
leds_ss4200: no LED devices found
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/sched.c:617 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by rc.sysinit/317:
#0: (&rq->lock){-.-.-.}, at: [<ffffffff8104996d>] task_fork_fair+0x51/0x101
stack backtrace:
Pid: 317, comm: rc.sysinit Not tainted 2.6.35.5-29.fc13.x86_64 #1
Call Trace:
[<ffffffff8107bda6>] lockdep_rcu_dereference+0xaa/0xb2
[<ffffffff81040292>] task_group+0x80/0x8f
[<ffffffff810402b8>] set_task_rq+0x17/0x73
[<ffffffff8104998e>] task_fork_fair+0x72/0x101
[<ffffffff8104bc0c>] sched_fork+0x106/0x18a
[<ffffffff8104fa52>] copy_process+0x6a3/0x11f1
[<ffffffff81010366>] ? native_sched_clock+0x2d/0x5f
[<ffffffff810101f5>] ? sched_clock+0x9/0xd
[<ffffffff8149f025>] ? mutex_unlock+0xe/0x10
[<ffffffff81070a16>] ? sched_clock_cpu+0xc3/0xce
[<ffffffff8105071a>] do_fork+0x17a/0x39f
[<ffffffff8107c6ef>] ? trace_hardirqs_on_caller+0x111/0x135
[<ffffffff8107c720>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff81009c6a>] ? sysret_check+0x2e/0x69
[<ffffffff8101111e>] sys_clone+0x28/0x2a
[<ffffffff81009fd3>] stub_clone+0x13/0x20
[<ffffffff81009c32>] ? system_call_fastpath+0x16/0x1b
EXT3-fs (sda1): using internal journal
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
Adding 2096476k swap on /dev/sda2. Priority:-1 extents:1 across:2096476k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:01:00.0: eth0: link up
r8169 0000:01:00.0: eth0: link up
coretemp coretemp.0: Unable to read TjMax from CPU.
coretemp coretemp.1: Unable to read TjMax from CPU.
smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997
ACPI: resource smsc47m1 [io 0x0684] conflicts with ACPI region RTIO [io 0x0680-0x06ff disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-0: found SMSC47M192 or compatible, version 2, stepping A0
eth0: no IPv6 routers present
general protection fault: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.3/i2c-0/0-002d/in5_max
CPU 1
Modules linked in: smsc47m192 hwmon_vid coretemp nf_conntrack_netbios_ns ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 iTCO_wdt i2c_i801 iTCO_vendor_support serio_raw r8169 mii sata_sil i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
Pid: 2221, comm: rsyslogd Not tainted 2.6.35.5-29.fc13.x86_64 #1 D945GCLF2/
RIP: 0010:[<ffffffff8122f04f>] [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
RSP: 0018:ffff88007ae83e58 EFLAGS: 00010202
RAX: 0000000100a2e380 RBX: 6b6b6b6b6b6b6b6b RCX: 0000000000000000
RDX: 0000000100a2e383 RSI: ffff8800059d0dd0 RDI: 0000000000000296
RBP: ffff88007ae83e68 R08: ffff8800375871a0 R09: 0000000000000000
R10: ffff88007ae83e58 R11: dead000000200200 R12: ffff8800375871a0
R13: ffff880077efaac8 R14: 0000000000000000 R15: ffff880037d58000
FS: 0000000000000000(0000) GS:ffff880005800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f703435c000 CR3: 0000000077f1d000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process rsyslogd (pid: 2221, threadinfo ffff88007ae82000, task ffff880077efa440)
Stack:
ffff8800375871a0 ffff880077efa440 ffff88007ae83e98 ffffffff812263db
<0> ffffffff812263a6 ffff880077efa440 ffff880077efaac8 ffff8800375871a0
<0> ffff88007ae83ed8 ffffffff812264e7 ffffffff81226492 ffff880077efaac8
Call Trace:
[<ffffffff812263db>] put_io_context+0x69/0x9c
[<ffffffff812263a6>] ? put_io_context+0x34/0x9c
[<ffffffff812264e7>] exit_io_context+0xa0/0xad
[<ffffffff81226492>] ? exit_io_context+0x4b/0xad
[<ffffffff810555a1>] do_exit+0x786/0x7ba
[<ffffffff814a03f8>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff810556be>] complete_and_exit+0x0/0x26
[<ffffffff81009c32>] system_call_fastpath+0x16/0x1b
Code: 81 e8 48 93 e8 ff 41 5a 5b 41 5c 41 5d 41 5e 41 5f c9 c3 55 48 89 e5 41 54 53 0f 1f 44 00 00 48 8b 5f 78 49 89 fc 48 85 db 74 17 <48> 8b 03 48 8d 73 b0 4c 89 e7 0f 18 08 e8 45 ff ff ff 48 8b 1b
RIP [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
RSP <ffff88007ae83e58>
---[ end trace f5f95d6a4269a602 ]---
Fixing recursive fault but reboot is needed!
TCP: Peer 81.153.158.4:15131/55811 unexpectedly shrunk window 2874168749:2874169831 (repaired)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
smbd used greatest stack depth: 2904 bytes left
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
udev: starting version 153
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
general protection fault: 0000 [#2] SMP
last sysfs file: /sys/fs/ecryptfs/version
CPU 2
Modules linked in: cbc cryptd aes_x86_64 aes_generic ecb ecryptfs smsc47m192 hwmon_vid coretemp nf_conntrack_netbios_ns ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 iTCO_wdt i2c_i801 iTCO_vendor_support serio_raw r8169 mii sata_sil i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
Pid: 18329, comm: flush-8:16 Tainted: G D 2.6.35.5-29.fc13.x86_64 #1 D945GCLF2/
RIP: 0010:[<ffffffff8122f04f>] [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
RSP: 0018:ffff88000d909d90 EFLAGS: 00010202
RAX: 00000001075550e9 RBX: 6b6b6b6b6b6b6b6b RCX: 0000000000000000
RDX: 00000001075550ec RSI: ffff880005bd0dd0 RDI: 0000000000000282
RBP: ffff88000d909da0 R08: ffff880040225340 R09: 0000000000000000
R10: ffff88000d909d90 R11: dead000000200200 R12: ffff880040225340
R13: ffff8800785a8688 R14: 0000000000000000 R15: ffff88007c800000
FS: 0000000000000000(0000) GS:ffff880005a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f96ea945c03 CR3: 0000000077ab7000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process flush-8:16 (pid: 18329, threadinfo ffff88000d908000, task ffff8800785a8000)
Stack:
ffff880040225340 ffff8800785a8000 ffff88000d909dd0 ffffffff812263db
<0> ffffffff812263a6 ffff8800785a8000 ffff8800785a8688 ffff880040225340
<0> ffff88000d909e10 ffffffff812264e7 ffffffff81226492 ffff8800785a8688
Call Trace:
[<ffffffff812263db>] put_io_context+0x69/0x9c
[<ffffffff812263a6>] ? put_io_context+0x34/0x9c
[<ffffffff812264e7>] exit_io_context+0xa0/0xad
[<ffffffff81226492>] ? exit_io_context+0x4b/0xad
[<ffffffff810555a1>] do_exit+0x786/0x7ba
[<ffffffff810f9965>] ? bdi_start_fn+0x0/0xda
[<ffffffff8106aebc>] kthreadd+0x0/0x13a
[<ffffffff8100aaa4>] kernel_thread_helper+0x4/0x10
[<ffffffff814a1310>] ? restore_args+0x0/0x30
[<ffffffff8106ae1a>] ? kthread+0x0/0xa2
[<ffffffff8100aaa0>] ? kernel_thread_helper+0x0/0x10
Code: 81 e8 48 93 e8 ff 41 5a 5b 41 5c 41 5d 41 5e 41 5f c9 c3 55 48 89 e5 41 54 53 0f 1f 44 00 00 48 8b 5f 78 49 89 fc 48 85 db 74 17 <48> 8b 03 48 8d 73 b0 4c 89 e7 0f 18 08 e8 45 ff ff ff 48 8b 1b
RIP [<ffffffff8122f04f>] cfq_free_io_context+0x18/0x34
RSP <ffff88000d909d90>
---[ end trace f5f95d6a4269a603 ]---
Fixing recursive fault but reboot is needed!
More information about the kernel
mailing list