Fedora 15 Update: freeradius-2.1.12-2.fc15
updates at fedoraproject.org
updates at fedoraproject.org
Fri Nov 25 02:05:55 UTC 2011
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2011-15252
2011-11-02 06:37:53
--------------------------------------------------------------------------------
Name : freeradius
Product : Fedora 15
Version : 2.1.12
Release : 2.fc15
URL : http://www.freeradius.org/
Summary : High-performance and highly configurable free RADIUS server
Description :
The FreeRADIUS Server Project is a high performance and highly configurable
GPL'd free RADIUS server. The server is similar in some respects to
Livingston's 2.0 server. While FreeRADIUS started as a variant of the
Cistron RADIUS server, they don't share a lot in common any more. It now has
many more features than Cistron or Livingston, and is much more configurable.
FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
protocol, as defined in RFC 2865 (and others). It allows Network Access
Servers (NAS boxes) to perform authentication for dial-up users. There are
also RADIUS clients available for Web servers, firewalls, Unix logins, and
more. Using RADIUS allows authentication and authorization for a network to
be centralized, and minimizes the amount of re-configuration which has to be
done when adding or deleting new users.
--------------------------------------------------------------------------------
Update Information:
F15 mounted /var/run as tmpfs which is wiped clean on a reboot
thus /var/run/radiusd which is created by the RPM install is absent.
Add /etc/tmpfiles.d/radiusd.conf to recreate directory on boot.
Upgrade to latest upstream release, 2.1.12. See RPM changelog for details.
Upgrade to latest upstream release, 2.1.11
See changelog for details
--------------------------------------------------------------------------------
ChangeLog:
* Mon Oct 31 2011 John Dennis <jdennis at redhat.com> - 2.1.12-2
- Resolves: #745334 - Fails to start due to missing /var/run/radiusd
F15 mounted /var/run as tmpfs which is wiped clean on a reboot
thus /var/run/radiusd which is created by the RPM install is absent.
Add /etc/tmpfiles.d/radiusd.conf to recreate directory on boot.
* Mon Oct 3 2011 John Dennis <jdennis at redhat.com> - 2.1.12-1
- Upgrade to latest upstream release: 2.1.12
- Upstream changelog for 2.1.12:
Feature improvements
* Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
* Added support for PCRE from Phil Mayers
* Configurable file permission in rlm_linelog
* Added "relaxed" option to rlm_attr_filter. This copies attributes
if at least one match occurred.
* Added documentation on dynamic clients.
See raddb/modules/dynamic_clients.
* Added support for elliptical curve cryptography.
See ecdh_curve in raddb/eap.conf.
* Added support for 802.1X MIBs in checkrad
* Added support for %{rand:...}, which generates a uniformly
distributed number between 0 and the number you specify.
* Created "man" pages for all installed commands, and documented
options for all commands. Patch from John Dennis.
* Allow radsniff to decode encrypted VSAs and CoA packets.
Patch from Bjorn Mork.
* Always send Message-Authenticator in radtest. Patch from John Dennis.
radclient continues to be more flexible.
* Updated Oracle schema and queries
* Added SecurID module. See src/modules/rlm_securid/README
Bug fixes
* Fix memory leak in rlm_detail
* Fix "failed to insert event"
* Allow virtual servers to be reloaded on HUP.
It no longer complains about duplicate virtual servers.
* Fix %{string:...} expansion
* Fix "server closed socket" loop in radmin
* Set ownership of control socket when starting up
* Always allow root to connect to control socket, even if
"uid" is set. They're root. They can already do anything.
* Save all attributes in Access-Accept when proxying inner-tunnel
EAP-MSCHAPv2
* Fixes for DHCP relaying.
* Check certificate validity when using OCSP.
* Updated Oracle "configure" script
* Fixed typos in dictionary.alvarion
* WARNING on potential proxy loop.
* Be more aggressive about clearing old requests from the
internal queue
* Don't open network sockets when using -C
* Wed Sep 21 2011 Tom Callaway <spot at fedoraproject.org> - 2.1.11-7
- restore defattr customization in the main package
* Fri Sep 9 2011 Tom Callaway <spot at fedoraproject.org> - 2.1.11-6
- add missing systemd scriptlets
* Thu Sep 8 2011 Tom Callaway <spot at fedoraproject.org> - 2.1.11-5
- convert to systemd
* Thu Jul 21 2011 Petr Sabata <contyk at redhat.com> - 2.1.11-4
- Perl mass rebuild
* Wed Jul 20 2011 Petr Sabata <contyk at redhat.com> - 2.1.11-3
- Perl mass rebuild
* Thu Jun 23 2011 John Dennis <jdennis at redhat.com> - 2.1.11-2
- reload the server (i.e. HUP) after logrotate
* Wed Jun 22 2011 John Dennis <jdennis at redhat.com> - 2.1.11-1
- Upgrade to latest upstream release: 2.1.11
- Remove the following two patches as upstream has incorporated them:
freeradius-radtest-ipv6.patch
freeradius-lt-dladvise.patch
- Upstream changelog for 2.1.11:
Feature improvements
* Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
All vendors need to read it and follow its directions.
* Microsoft SoH support for PEAP from Phil Mayers.
See doc/SoH.txt
* Certificate "bootstrap" script now checks for certificate expiry.
See comments in raddb/eap.conf, and then "make_cert_command".
* Support for dynamic expansion of EAP-GTC challenges.
Patch from Alexander Clouter.
* OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp"
section.
* Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
* Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
* Experimental redis support from Gabriel Blanchard.
See raddb/modules/redis and raddb/modules/rediswho
* Add "key" to rlm_fastusers. Closes bug #126.
* Added scripts/radtee from original software at
http://horde.net/~jwm/software/misc/comparison-tee
* Updated radmin "man" page for new commands.
* radsniff now prints the hex decoding of the packet (-x -x -x)
* mschap module now reloads its configuration on HUP
* Added experimental "replicate" module. See raddb/modules/replicate
* Policy "foo" can now refer to module "foo". This lets you
over-ride the behavior of a module.
* Policy "foo.authorize" can now over-ride the behavior of module
"foo", "authorize" method.
* Produce errors in more situations when the configuration files
have invalid syntax.
Bug fixes
* Ignore pre/post-proxy sections if proxying is disabled
* Add configure checks for pcap_fopen*.
* Fix call to otp_write in rlm_otp
* Fix issue with Access-Challenge checking from 2.1.10, when the
debug flag was set after server startup. Closes #116 and #117.
* Fix typo in zombie period start time.
* Fix leak in src/main/valuepair.c. Patch from James Ballantine.
* Allow radtest to use spaces in shared secret.
Patch from Cedric Carree.
* Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
Patch from James Ballantine.
* Remove MN-FA key generation. The NAS does this, not AAA.
Patch from Ben Weichman.
* Include dictionary.mikrotik by default. Closes bug #121.
* Add group membership query to MS-SQL examples. Closes bug #120.
* Don't cast NAS-Port to integer in Postgresql queries.
Closes bug #112.
* Fixes for libtool and autoconf from Sam Hartman.
* radsniff should read the dictionaries in more situations.
* Use fnmatch to check for detail file reader==writer.
Closes bug #128.
* Check for short writes (i.e. disk full) in rlm_detail.
Closes bug #130. Patches and testing from John Morrissey.
* Fix typo in src/lib/token.c. Closes bug #124
* Allow workstation trust accounts to use MS-CHAP.
Closes bug #123.
* Assigning foo=`/bin/echo hello` now produces a syntax error
if it is done outside of an "update" section.
* Fix "too many open file descriptors" problem when using
"verify client" in eap.conf.
* Many fixes to dialup_admin for PHP5, by Stefan Winter.
* Allow preprocess module to have "hints = " and "huntgroups =",
which allows them to be empty or non-existent.
* Renamed "php3" files to "php" in dialup_admin/
* Produce error when sub-TLVs are used in a dictionary. They are
supported only in the "master" branch, and not in 2.1.x.
* Minor fix in dictionary.redback. Closes bug #138.
* Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129.
* Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
Closes bug #118.
* DHCP fixes to send unicast packets in more situations.
* Fix to udpfromto, to enable it to work on IPv6 networks.
* Fixes to the Oracle accounting_onoff_query.
* When using both IPv4 and IPv6 home servers, ensure that we use the
correct local socket for proxying. Closes bug #143.
* Suppress messages when thread pool is nearly full, all threads
are busy, and we can't create new threads.
* IPv6 is now enabled for udpfromto. Closes bug #141
* Make sqlippool query buffer the same size as sql module.
Closes bug #139.
* Make Coa / Disconnect proxying work again.
* Configure scripts for rlm_caching from Nathaniel McCallum
* src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
* Updated password routines to use time-insensitive comparisons.
This prevents timing attacks (though none are known).
* Allow sqlite module to do normal SELECT queries.
* rlm_wimax now has a configure script
* Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
files. See share/dictionary for explanations.
* Check for duplicate module definitions in the modules{} section,
and refuse to start if duplicates are found.
* Check for duplicate virtual servers, and refuse to start if
duplicates are found.
* Don't use udpfromto if source is INADDR_ANY. Closes bug #148.
* Check pre-conditions before running radmin "inject file".
* Don't over-ride "no match" with "match" for regexes.
Closes bug #152.
* Make retry and error message configurable in mschap.
See raddb/modules/mschap
* Allow EAP-MSCHAPv2 to send error message to client. This change
allows some clients to prompt the user for a new password.
See raddb/eap.conf, mschapv2 section, "send_error".
* Load the default virtual server before any others.
This matches what users expect, and reduces confusion.
* Fix configure checks for udpfromto. Fixes Debian bug #606866
* Definitive fix for bug #35, where the server could crash under
certain loads. Changes src/lib/packet.c to use RB trees.
* Updated "configure" checks to allow IPv6 udpfromto on Linux.
* SQL module now returns NOOP if the accounting start/interim/stop
queries don't do anything.
* Allow %{outer.control: ... } in string expansions
* home_server coa config now matches raddb/proxy.conf
* Never send a reply to a DHCP Release.
* Thu Jun 16 2011 Marcela Mašláňová <mmaslano at redhat.com> - 2.1.10-8
- Perl mass rebuild
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #745334 - freeradius doesn't start in fc15
https://bugzilla.redhat.com/show_bug.cgi?id=745334
--------------------------------------------------------------------------------
This update can be installed with the "yum" update program. Use
su -c 'yum update freeradius' at the command line.
For more information, refer to "Managing Software with yum",
available at http://docs.fedoraproject.org/yum/.
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
More information about the package-announce
mailing list