[Bug 1152816] Second Extruder Motor Gain Very Low

[bugzilla at redhat.com]

https://bugzilla.redhat.com/show_bug.cgi?id=1152816

Craig Faas <cgfaas at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
              Flags|needinfo?(cgfaas at gmail.com) |



--- Comment #5 from Craig Faas <cgfaas at gmail.com> ---

(In reply to Miro Hrončok from comment #4)
> > in inf file
> I meant in ini file

Hi Redhat,

Thanks gain for looking at this. I am running Fedora 20 BTW.

Everything you have requested is attached in the email body below. If you are
still missing something I don't know what it is.

Attached are the TWO COlOR.amf file (this came from Printrbot and I have
printed successfully with Window slic3r 1.1.7 many times), the .ini file (which
has a .txt extension, you'll need to change it back to .ini. The redhat sever
rejected my email because of the .ini extension),
and the (4) .gcode files are generated from as follows

TWO COLORslic3r1.0.1FedOct152014.gcode was made using slic3r 1.0.1
installed through yum package manager.

TWO COLORslic3r1.0.1WinOct152014.gcode was made using slic3r 1.0.1 on a
windows 7 machine.

TWO COLORslic3r1.1.7FedOct152014.gcode was made using slic3r 1.1.7
installed through Archive Mounter from a tarball

TWO COLORslic3r1.0.1WINOct152014.gcode was made using slic3r 1.1.7 on a
windows 7 machine.

The .ini file may not help much (attached as .txt). I assured the user
permitted values were exact matches. There are some odd differences on the
1.1.7 set; different number of threads,.. some background config stuff. 

The greatest difference and likely where you will see the bug solved in
in the amount of filament used in the 1.0.1 files between Windows and
Fedora slic3r 1.0.1. (Note they use the term filament rather than
extruder 1, extruder 2)

Fedora 1.0.1 
extruder 1 = 244.4mm (0.6cm3)
extruder 2 = 164.4mm (1.2cm3)

Windows 1.0.1
extruder 1 = 244.4mm (0.6cm3)
extruder 2 = 488.5mm (1.2cm3) A > 2 fold difference (our bug, or the
results thereof)


For completeness

Fedora 1.1.7
extruder 1 = 251.6mm (0.6cm3)
extruder 2 = 527.3mm (1.3cm3)

Windows 1.1.7
extruder 1 = 246.6mm (0.6cm3)
extruder 2 = 527.3mm (1.3cm3)

-- 
You are receiving this mail because:
You are on the CC list for the bug.
Unsubscribe from this bug https://bugzilla.redhat.com/token.cgi?t=zZeSaBMHWN&a=cc_unsubscribe