pghmcfc pushed to perl-IO-Socket-SSL (master). "Update to 2.020 (..more)"
notifications at fedoraproject.org
notifications at fedoraproject.org
Mon Sep 21 09:59:58 UTC 2015
From 1b76ff56a26e24bad6b34ce5f39850f727c38bdb Mon Sep 17 00:00:00 2001
From: Paul Howarth <paul at city-fan.org>
Date: Mon, 21 Sep 2015 10:56:58 +0100
Subject: Update to 2.020
- New upstream release 2.020
- Support multiple directories in SSL_ca_path (CPAN RT#106711); directories
can be given as array or as string with a path separator
- Typos fixed (https://github.com/noxxi/p5-io-socket-ssl/pull/34)
- Update patches as needed
diff --git a/IO-Socket-SSL-2.018-use-system-default-cipher-list.patch b/IO-Socket-SSL-2.018-use-system-default-cipher-list.patch
deleted file mode 100644
index 8468bc9..0000000
--- a/IO-Socket-SSL-2.018-use-system-default-cipher-list.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- lib/IO/Socket/SSL.pm
-+++ lib/IO/Socket/SSL.pm
-@@ -92,9 +92,7 @@ my %DEFAULT_SSL_ARGS = (
- #SSL_verifycn_name => undef, # use from PeerAddr/PeerHost - do not override in set_args_filter_hack 'use_defaults'
- SSL_npn_protocols => undef, # meaning depends whether on server or client side
- SSL_alpn_protocols => undef, # list of protocols we'll accept/send, for example ['http/1.1','spdy/3.1']
-- SSL_cipher_list =>
-- 'EECDH+AESGCM+ECDSA EECDH+AESGCM EECDH+ECDSA +AES256 EECDH EDH+AESGCM '.
-- 'EDH ALL +SHA +3DES !RC4 !LOW !EXP !eNULL !aNULL !DES !MD5 !PSK !SRP',
-+ SSL_cipher_list => 'DEFAULT',
- );
-
- my %DEFAULT_SSL_CLIENT_ARGS = (
-@@ -104,42 +102,6 @@ my %DEFAULT_SSL_CLIENT_ARGS = (
- SSL_ca_file => undef,
- SSL_ca_path => undef,
-
-- # older versions of F5 BIG-IP hang when getting SSL client hello >255 bytes
-- # http://support.f5.com/kb/en-us/solutions/public/13000/000/sol13037.html
-- # http://guest:guest@rt.openssl.org/Ticket/Display.html?id=2771
-- # Debian works around this by disabling TLSv1_2 on the client side
-- # Chrome and IE11 use TLSv1_2 but use only a few ciphers, so that packet
-- # stays small enough
-- # The following list is taken from IE11, except that we don't do RC4-MD5,
-- # RC4-SHA is already bad enough. Also, we have a different sort order
-- # compared to IE11, because we put ciphers supporting forward secrecy on top
--
-- SSL_cipher_list => join(" ",
-- qw(
-- ECDHE-ECDSA-AES128-GCM-SHA256
-- ECDHE-ECDSA-AES128-SHA256
-- ECDHE-ECDSA-AES256-GCM-SHA384
-- ECDHE-ECDSA-AES256-SHA384
-- ECDHE-ECDSA-AES128-SHA
-- ECDHE-ECDSA-AES256-SHA
-- ECDHE-RSA-AES128-SHA256
-- ECDHE-RSA-AES128-SHA
-- ECDHE-RSA-AES256-SHA
-- DHE-DSS-AES128-SHA256
-- DHE-DSS-AES128-SHA
-- DHE-DSS-AES256-SHA256
-- DHE-DSS-AES256-SHA
-- AES128-SHA256
-- AES128-SHA
-- AES256-SHA256
-- AES256-SHA
-- EDH-DSS-DES-CBC3-SHA
-- DES-CBC3-SHA
-- RC4-SHA
-- ),
-- # just to make sure, that we don't accidentely add bad ciphers above
-- "!EXP !LOW !eNULL !aNULL !DES !MD5 !PSK !SRP"
-- )
- );
-
- # set values inside _init to work with perlcc, RT#95452
---- lib/IO/Socket/SSL.pod
-+++ lib/IO/Socket/SSL.pod
-@@ -960,12 +960,8 @@ documentation (L<http://www.openssl.org/
- for more details.
-
- Unless you fail to contact your peer because of no shared ciphers it is
--recommended to leave this option at the default setting. The default setting
--prefers ciphers with forward secrecy, disables anonymous authentication and
--disables known insecure ciphers like MD5, DES etc. This gives a grade A result
--at the tests of SSL Labs.
--To use the less secure OpenSSL builtin default (whatever this is) set
--SSL_cipher_list to ''.
-+recommended to leave this option at the default setting, which honors the
-+system-wide DEFAULT cipher list.
-
- In case different cipher lists are needed for different SNI hosts a hash can be
- given with the host as key and the cipher suite as value, similar to
diff --git a/IO-Socket-SSL-2.019-use-system-default-SSL-version.patch b/IO-Socket-SSL-2.019-use-system-default-SSL-version.patch
deleted file mode 100644
index c29e108..0000000
--- a/IO-Socket-SSL-2.019-use-system-default-SSL-version.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- lib/IO/Socket/SSL.pm
-+++ lib/IO/Socket/SSL.pm
-@@ -85,7 +85,7 @@ my $algo2digest = do {
- # global defaults
- my %DEFAULT_SSL_ARGS = (
- SSL_check_crl => 0,
-- SSL_version => 'SSLv23:!SSLv3:!SSLv2', # consider both SSL3.0 and SSL2.0 as broken
-+ SSL_version => '',
- SSL_verify_callback => undef,
- SSL_verifycn_scheme => undef, # fallback cn verification
- SSL_verifycn_publicsuffix => undef, # fallback default list verification
-@@ -2143,7 +2143,7 @@ sub new {
- $ssl_op |= &Net::SSLeay::OP_SINGLE_DH_USE;
- $ssl_op |= &Net::SSLeay::OP_SINGLE_ECDH_USE if $can_ecdh;
-
-- my $ver;
-+ my $ver = '';
- for (split(/\s*:\s*/,$arg_hash->{SSL_version})) {
- m{^(!?)(?:(SSL(?:v2|v3|v23|v2/3))|(TLSv1(?:_?[12])?))$}i
- or croak("invalid SSL_version specified");
---- lib/IO/Socket/SSL.pod
-+++ lib/IO/Socket/SSL.pod
-@@ -934,11 +934,12 @@ protocol to the specified version.
- All values are case-insensitive. Instead of 'TLSv1_1' and 'TLSv1_2' one can
- also use 'TLSv11' and 'TLSv12'. Support for 'TLSv1_1' and 'TLSv1_2' requires
- recent versions of Net::SSLeay and openssl.
-+The default SSL_version is defined by the underlying cryptographic library.
-
- Independent from the handshake format you can limit to set of accepted SSL
- versions by adding !version separated by ':'.
-
--The default SSL_version is 'SSLv23:!SSLv3:!SSLv2' which means, that the
-+For example, 'SSLv23:!SSLv3:!SSLv2' means that the
- handshake format is compatible to SSL2.0 and higher, but that the successful
- handshake is limited to TLS1.0 and higher, that is no SSL2.0 or SSL3.0 because
- both of these versions have serious security issues and should not be used
diff --git a/IO-Socket-SSL-2.020-use-system-default-SSL-version.patch b/IO-Socket-SSL-2.020-use-system-default-SSL-version.patch
new file mode 100644
index 0000000..d460cf9
--- /dev/null
+++ b/IO-Socket-SSL-2.020-use-system-default-SSL-version.patch
@@ -0,0 +1,36 @@
+--- lib/IO/Socket/SSL.pm
++++ lib/IO/Socket/SSL.pm
+@@ -85,7 +85,7 @@ my $algo2digest = do {
+ # global defaults
+ my %DEFAULT_SSL_ARGS = (
+ SSL_check_crl => 0,
+- SSL_version => 'SSLv23:!SSLv3:!SSLv2', # consider both SSL3.0 and SSL2.0 as broken
++ SSL_version => '',
+ SSL_verify_callback => undef,
+ SSL_verifycn_scheme => undef, # fallback cn verification
+ SSL_verifycn_publicsuffix => undef, # fallback default list verification
+@@ -2167,7 +2167,7 @@ sub new {
+ $ssl_op |= &Net::SSLeay::OP_SINGLE_DH_USE;
+ $ssl_op |= &Net::SSLeay::OP_SINGLE_ECDH_USE if $can_ecdh;
+
+- my $ver;
++ my $ver = '';
+ for (split(/\s*:\s*/,$arg_hash->{SSL_version})) {
+ m{^(!?)(?:(SSL(?:v2|v3|v23|v2/3))|(TLSv1(?:_?[12])?))$}i
+ or croak("invalid SSL_version specified");
+--- lib/IO/Socket/SSL.pod
++++ lib/IO/Socket/SSL.pod
+@@ -940,11 +940,12 @@ protocol to the specified version.
+ All values are case-insensitive. Instead of 'TLSv1_1' and 'TLSv1_2' one can
+ also use 'TLSv11' and 'TLSv12'. Support for 'TLSv1_1' and 'TLSv1_2' requires
+ recent versions of Net::SSLeay and openssl.
++The default SSL_version is defined by the underlying cryptographic library.
+
+ Independent from the handshake format you can limit to set of accepted SSL
+ versions by adding !version separated by ':'.
+
+-The default SSL_version is 'SSLv23:!SSLv3:!SSLv2' which means, that the
++For example, 'SSLv23:!SSLv3:!SSLv2' means that the
+ handshake format is compatible to SSL2.0 and higher, but that the successful
+ handshake is limited to TLS1.0 and higher, that is no SSL2.0 or SSL3.0 because
+ both of these versions have serious security issues and should not be used
diff --git a/IO-Socket-SSL-2.020-use-system-default-cipher-list.patch b/IO-Socket-SSL-2.020-use-system-default-cipher-list.patch
new file mode 100644
index 0000000..dfb655b
--- /dev/null
+++ b/IO-Socket-SSL-2.020-use-system-default-cipher-list.patch
@@ -0,0 +1,73 @@
+--- lib/IO/Socket/SSL.pm
++++ lib/IO/Socket/SSL.pm
+@@ -92,9 +92,7 @@ my %DEFAULT_SSL_ARGS = (
+ #SSL_verifycn_name => undef, # use from PeerAddr/PeerHost - do not override in set_args_filter_hack 'use_defaults'
+ SSL_npn_protocols => undef, # meaning depends whether on server or client side
+ SSL_alpn_protocols => undef, # list of protocols we'll accept/send, for example ['http/1.1','spdy/3.1']
+- SSL_cipher_list =>
+- 'EECDH+AESGCM+ECDSA EECDH+AESGCM EECDH+ECDSA +AES256 EECDH EDH+AESGCM '.
+- 'EDH ALL +SHA +3DES !RC4 !LOW !EXP !eNULL !aNULL !DES !MD5 !PSK !SRP',
++ SSL_cipher_list => 'DEFAULT',
+ );
+
+ my %DEFAULT_SSL_CLIENT_ARGS = (
+@@ -104,42 +102,6 @@ my %DEFAULT_SSL_CLIENT_ARGS = (
+ SSL_ca_file => undef,
+ SSL_ca_path => undef,
+
+- # older versions of F5 BIG-IP hang when getting SSL client hello >255 bytes
+- # http://support.f5.com/kb/en-us/solutions/public/13000/000/sol13037.html
+- # http://guest:guest@rt.openssl.org/Ticket/Display.html?id=2771
+- # Debian works around this by disabling TLSv1_2 on the client side
+- # Chrome and IE11 use TLSv1_2 but use only a few ciphers, so that packet
+- # stays small enough
+- # The following list is taken from IE11, except that we don't do RC4-MD5,
+- # RC4-SHA is already bad enough. Also, we have a different sort order
+- # compared to IE11, because we put ciphers supporting forward secrecy on top
+-
+- SSL_cipher_list => join(" ",
+- qw(
+- ECDHE-ECDSA-AES128-GCM-SHA256
+- ECDHE-ECDSA-AES128-SHA256
+- ECDHE-ECDSA-AES256-GCM-SHA384
+- ECDHE-ECDSA-AES256-SHA384
+- ECDHE-ECDSA-AES128-SHA
+- ECDHE-ECDSA-AES256-SHA
+- ECDHE-RSA-AES128-SHA256
+- ECDHE-RSA-AES128-SHA
+- ECDHE-RSA-AES256-SHA
+- DHE-DSS-AES128-SHA256
+- DHE-DSS-AES128-SHA
+- DHE-DSS-AES256-SHA256
+- DHE-DSS-AES256-SHA
+- AES128-SHA256
+- AES128-SHA
+- AES256-SHA256
+- AES256-SHA
+- EDH-DSS-DES-CBC3-SHA
+- DES-CBC3-SHA
+- RC4-SHA
+- ),
+- # just to make sure, that we don't accidentely add bad ciphers above
+- "!EXP !LOW !eNULL !aNULL !DES !MD5 !PSK !SRP"
+- )
+ );
+
+ # set values inside _init to work with perlcc, RT#95452
+--- lib/IO/Socket/SSL.pod
++++ lib/IO/Socket/SSL.pod
+@@ -966,12 +966,8 @@ documentation (L<http://www.openssl.org/
+ for more details.
+
+ Unless you fail to contact your peer because of no shared ciphers it is
+-recommended to leave this option at the default setting. The default setting
+-prefers ciphers with forward secrecy, disables anonymous authentication and
+-disables known insecure ciphers like MD5, DES etc. This gives a grade A result
+-at the tests of SSL Labs.
+-To use the less secure OpenSSL builtin default (whatever this is) set
+-SSL_cipher_list to ''.
++recommended to leave this option at the default setting, which honors the
++system-wide DEFAULT cipher list.
+
+ In case different cipher lists are needed for different SNI hosts a hash can be
+ given with the host as key and the cipher suite as value, similar to
diff --git a/perl-IO-Socket-SSL.spec b/perl-IO-Socket-SSL.spec
index bf9a6ce..162d80f 100644
--- a/perl-IO-Socket-SSL.spec
+++ b/perl-IO-Socket-SSL.spec
@@ -1,13 +1,13 @@
Name: perl-IO-Socket-SSL
-Version: 2.019
+Version: 2.020
Release: 1%{?dist}
Summary: Perl library for transparent SSL
Group: Development/Libraries
License: GPL+ or Artistic
URL: http://search.cpan.org/dist/IO-Socket-SSL/
Source0: http://search.cpan.org/CPAN/authors/id/S/SU/SULLR/IO-Socket-SSL-%{version}.tar.gz
-Patch0: IO-Socket-SSL-2.018-use-system-default-cipher-list.patch
-Patch1: IO-Socket-SSL-2.019-use-system-default-SSL-version.patch
+Patch0: IO-Socket-SSL-2.020-use-system-default-cipher-list.patch
+Patch1: IO-Socket-SSL-2.020-use-system-default-SSL-version.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(id -nu)
BuildArch: noarch
# Module Build
@@ -115,6 +115,13 @@ rm -rf %{buildroot}
%{_mandir}/man3/IO::Socket::SSL::Utils.3*
%changelog
+* Mon Sep 21 2015 Paul Howarth <paul at city-fan.org> - 2.020-1
+- Update to 2.020
+ - Support multiple directories in SSL_ca_path (CPAN RT#106711); directories
+ can be given as array or as string with a path separator
+ - Typos fixed (https://github.com/noxxi/p5-io-socket-ssl/pull/34)
+- Update patches as needed
+
* Tue Sep 1 2015 Paul Howarth <paul at city-fan.org> - 2.019-1
- Update to 2.019
- Work around different behavior of getnameinfo from Socket and Socket6 by
diff --git a/sources b/sources
index ac87108..eec0ed7 100644
--- a/sources
+++ b/sources
@@ -1 +1 @@
-c3a626bcb99ac9ab3cdf7828f106ffb7 IO-Socket-SSL-2.019.tar.gz
+dc0f5992492786a0bde79d2f8fb00cc1 IO-Socket-SSL-2.020.tar.gz
--
cgit v0.10.2
http://pkgs.fedoraproject.org/cgit/perl-IO-Socket-SSL.git/commit/?h=master&id=1b76ff56a26e24bad6b34ce5f39850f727c38bdb
More information about the perl-devel
mailing list