Fedora 16 Beta VNC install works, Fedora 17 does not (IBM Power 285)

Thu Jul 5 08:10:42 UTC 2012

On 07/02/2012 07:20 PM, thus Gustavo Luiz Duarte spake:
> There is a bug on anaconda that if your *first* network device
> doesn't have an IP address anaconda will crash. You may be hitting
> this issue in case your DHCP has MAC to IP address mapping or in case
> you are setting up network manually.
>
> There is a patch, but I don't think it has been committed yet (and
> I'm sure it is not on F17 DVD).
> https://www.redhat.com/archives/anaconda-devel-list/2012-June/msg00115.html
>
>  You can workaround this issue by making sure your *first* network
> device will get an IP address from DHCP (or manually setting it up).

Well, as written just a minute ago, it's first ethernet connected to a
DHCP-featured network, and it works flawlessly for F16.

> []'s Gustavo

Cheers,

Timo

> On 07/02/2012 04:46 AM, Timo Schoeler wrote:
>> Hi,
>>
>> I just double verified following issue:
>>
>> * Installing Fedora 16 ppc64 on my Power 285 (connected via serial,
>> then booting 'linux vnc') using VNC runs smoothly
>>
>> * Trying the same using Fedora 17 ISO fails
>>
>> It seems as if the Network Manager fails on Fedora 17 and causes
>> anaconda's vncS.startServer() to bark.
>>
>> Is that a known issue? Should I file a bug record for this?
>>
>> Cheers,
>>
>> Timo
>>
>> ---
>>
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>>  IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM STARTING SOFTWARE IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM PLEASE WAIT... IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
>> IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM | Elapsed time
>> since release of system processors: 2 mins 41 secs
>>
>> Config file read, 246 bytes
>>
>>
>> Welcome to the 64-bit Fedora 17 installer! Hit <TAB> for boot
>> options.
>>
>>
>> Welcome to yaboot version 1.3.17 (Red Hat 1.3.17-2.fc16) Enter
>> "help" to get some basic usage information boot: linux vnc Please
>> wait, loading kernel... Elf64 kernel loaded... Loading ramdisk...
>> ramdisk loaded at 03300000, size: 23133 Kbytes OF stdout device is:
>> /vdevice/vty at 30000000 Preparing to boot Linux version
>> 3.3.4-5.fc17.ppc64 (mockbuild at ppc-builder2.qa.fedoraproject.org)
>> (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon
>> May 14 10:18:37 MST 2012 Detected machine type: 0000000000000101
>> Max number of cores passed to firmware: 512 (NR_CPUS = 1024)
>> Calling ibm,client-architecture-support... not implemented command
>> line: ro root=live:CDLABEL=Fedora_17_ppc64 vnc memory layout at
>> init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom
>> : 00000000049a0000 alloc_top : 0000000008000000 alloc_top_hi :
>> 00000000f5000000 rmo_top : 0000000008000000 ram_top :
>> 00000000f5000000 found display : /pci at 800000020000002/display at 1,
>> opening... done instantiating rtas at 0x00000000075a0000... done
>> Querying for OPAL presence... not there. boot cpu hw idx 0 copying
>> OF device tree... Building dt strings... Building dt structure...
>> Device tree strings 0x0000000004ab0000 -> 0x0000000004ab137c Device
>> tree struct 0x0000000004ac0000 -> 0x0000000004ae0000 [ 0.000000]
>> Phyp-dump not supported on this hardware [ 0.000000] Using pSeries
>> machine description [ 0.000000] Using 1TB segments [ 0.000000]
>> Found initrd at 0xc000000003300000:0xc0000000049975ac [ 0.000000]
>> bootconsole [udbg0] enabled [ 0.000000] Partition configured for 2
>> cpus. [ 0.000000] CPU maps initialized for 2 threads per core [
>> 0.000000] Starting Linux PPC64 #1 SMP Mon May 14 10:18:37 MST 2012
>> [ 0.000000] ----------------------------------------------------- [
>> 0.000000] ppc64_pft_size = 0x1a [ 0.000000] physicalMemorySize =
>> 0xf5000000 [ 0.000000] htab_hash_mask = 0x7ffff [ 0.000000]
>> ----------------------------------------------------- [ 0.000000]
>> Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup
>> subsys cpu [ 0.000000] Linux version 3.3.4-5.fc17.ppc64
>> (mockbuild at ppc-builder2.qa.fedoraproject.org) (gcc version 4.7.0
>> 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 14 10:18:37 MST
>> 2012 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] PCI host bridge
>> /pci at 800000020000002 ranges: [ 0.000000] IO
>> 0x000003fe00200000..0x000003fe002fffff -> 0x0000000000000000 [
>> 0.000000] MEM 0x0000040040000000..0x000004007fffffff ->
>> 0x00000000c0000000 [ 0.000000] PCI host bridge /pci at 800000020000003
>> ranges: [ 0.000000] IO 0x000003fe00300000..0x000003fe003fffff ->
>> 0x0000000000000000 [ 0.000000] MEM
>> 0x0000040080000000..0x00000400bfffffff -> 0x00000000c0000000 [
>> 0.000000] PCI host bridge /pci at 800000020000004 ranges: [ 0.000000]
>> IO 0x000003fe00400000..0x000003fe004fffff -> 0x0000000000000000 [
>> 0.000000] MEM 0x00000400c0000000..0x00000400ffffffff ->
>> 0x00000000c0000000 [ 0.000000] EEH: PCI Enhanced I/O Error Handling
>> Enabled [ 0.000000] PPC64 nvram contains 7168 bytes [ 0.000000]
>> Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x0000f500 [
>> 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each
>> node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000
>> -> 0x0000f500 [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU:
>> Embedded 2 pages/cpu @c000000001700000 s84608 r0 d46464 u524288 [
>> 0.000000] Built 1 zonelists in Node order, mobility grouping on.
>> Total pages: 62666 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel
>> command line: ro root=live:CDLABEL=Fedora_17_ppc64 vnc [ 0.000000]
>> PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000]
>> freeing bootmem node 0 [ 0.000000] Memory: 3940480k/4014080k
>> available (17920k kernel code, 73600k reserved, 1856k data, 2952k
>> bss, 6656k init) [ 0.000000] SLUB: Genslabs=19, HWalign=128,
>> Order=0-3, MinObjects=0, CPUs=2, Nodes=256 [ 0.000000] Hierarchical
>> RCU implementation. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [
>> 0.000000] clocksource: timebase mult[21b5307] shift[23] registered
>> [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console
>> [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0]
>> enabled, bootconsole disabled [ 0.000000] allocated 1003520 bytes
>> of page_cgroup [ 0.000000] please try 'cgroup_disable=memory'
>> option if you don't want memory cgroups [ 0.003477] pid_max:
>> default: 32768 minimum: 301 [ 0.003542] Security Framework
>> initialized [ 0.003556] SELinux: Initializing. [ 0.003790] Dentry
>> cache hash table entries: 524288 (order: 6, 4194304 bytes) [
>> 0.005169] Inode-cache hash table entries: 262144 (order: 5,
>> 2097152 bytes) [ 0.005774] Mount-cache hash table entries: 4096 [
>> 0.013400] Initializing cgroup subsys cpuacct [ 0.013410]
>> Initializing cgroup subsys memory [ 0.013517] Initializing cgroup
>> subsys devices [ 0.013524] Initializing cgroup subsys freezer [
>> 0.013531] Initializing cgroup subsys net_cls [ 0.013538]
>> Initializing cgroup subsys blkio [ 0.053937] Initializing cgroup
>> subsys perf_event [ 0.053987] ftrace: allocating 21118 entries in 8
>> pages [ 0.068079] POWER5+/++ performance monitor hardware support
>> registered [ 0.068600] Brought up 2 CPUs [ 0.069634] devtmpfs:
>> initialized [ 0.084310] atomic64 test passed [ 0.084400] NET:
>> Registered protocol family 16 [ 0.084423] IBM eBus Device Driver [
>> 0.087480] PCI: Probing PCI hardware [ 0.087586] PCI host bridge to
>> bus 0000:00 [ 0.087596] pci_bus 0000:00: root bus resource [io
>> 0x10000-0x10ffff] [ 0.087607] pci_bus 0000:00: root bus resource
>> [mem 0x40040000000-0x4007fffffff] [ 0.090599] IOMMU table
>> initialized, virtual merging enabled [ 0.106095] PCI host bridge to
>> bus 0001:00 [ 0.106104] pci_bus 0001:00: root bus resource [io
>> 0x120000-0x21ffff] [ 0.106114] pci_bus 0001:00: root bus resource
>> [mem 0x40080000000-0x400bfffffff] [ 0.124208] PCI host bridge to
>> bus 0002:00 [ 0.124219] pci_bus 0002:00: root bus resource [io
>> 0x230000-0x32ffff] [ 0.124229] pci_bus 0002:00: root bus resource
>> [mem 0x400c0000000-0x400ffffffff] [ 0.152049] opal: Node not found
>> [ 0.153811] bio: create slab <bio-0> at 0 [ 0.154089] vgaarb:
>> device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none [
>> 0.154120] vgaarb: loaded [ 0.154125] vgaarb: bridge control
>> possible 0000:00:01.0 [ 0.154241] SCSI subsystem initialized [
>> 0.218546] usbcore: registered new interface driver usbfs [
>> 0.218571] usbcore: registered new interface driver hub [ 0.218626]
>> usbcore: registered new device driver usb [ 0.218911] NetLabel:
>> Initializing [ 0.218918] NetLabel: domain hash size = 128 [
>> 0.218925] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218949]
>> NetLabel: unlabeled traffic allowed by default [ 0.219047]
>> Switching to clocksource timebase [ 0.238925] NET: Registered
>> protocol family 2 [ 0.238990] IP route cache hash table entries:
>> 32768 (order: 2, 262144 bytes) [ 0.239201] TCP established hash
>> table entries: 131072 (order: 5, 2097152 bytes) [ 0.239765] TCP
>> bind hash table entries: 65536 (order: 4, 1048576 bytes) [
>> 0.284065] TCP: Hash tables configured (established 131072 bind
>> 65536) [ 0.284075] TCP reno registered [ 0.284087] UDP hash table
>> entries: 2048 (order: 0, 65536 bytes) [ 0.284121] UDP-Lite hash
>> table entries: 2048 (order: 0, 65536 bytes) [ 0.284233] NET:
>> Registered protocol family 1 [ 0.400022] Unpacking initramfs... [
>> 6.104168] Freeing initrd memory: 23168k freed [ 6.105660] vio
>> 30000000: Warning: IOMMU dma not supported: mask
>> 0xffffffffffffffff, table unavailable [ 6.105732] vio 30000001:
>> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
>> unavailable [ 6.105776] vio 4000: Warning: IOMMU dma not supported:
>> mask 0xffffffffffffffff, table unavailable [ 6.105817] vio 4001:
>> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
>> unavailable [ 6.105858] vio 4002: Warning: IOMMU dma not supported:
>> mask 0xffffffffffffffff, table unavailable [ 6.105898] vio 4003:
>> Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table
>> unavailable [ 6.106364] audit: initializing netlink socket
>> (disabled) [ 6.106389] type=2000 audit(1340956324.059:1):
>> initialized [ 6.295130] HugeTLB registered 16 MB page size,
>> pre-allocated 0 pages [ 6.295144] HugeTLB registered 16 GB page
>> size, pre-allocated 0 pages [ 6.299225] VFS: Disk quotas
>> dquot_6.5.2 [ 6.299340] Dquot-cache hash table entries: 8192 (order
>> 0, 65536 bytes) [ 6.300219] msgmni has been set to 7740 [ 6.300928]
>> alg: No test for stdrng (krng) [ 6.300946] NET: Registered protocol
>> family 38 [ 6.301031] Block layer SCSI generic (bsg) driver version
>> 0.4 loaded (major 253) [ 6.301079] io scheduler noop registered [
>> 6.301087] io scheduler deadline registered [ 6.301199] io scheduler
>> cfq registered (default) [ 6.301361] pci_hotplug: PCI Hot Plug PCI
>> Core version: 0.5 [ 6.301538] Using unsupported 1024x768 display at
>> 4007e000000, depth=8, pitch=1024 [ 6.312070] Console: switching to
>> colour frame buffer device 128x48 [ 6.325888] fb0: Open Firmware
>> frame buffer device on /pci at 800000020000002/display at 1 [ 6.326491]
>> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.328118]
>> Linux agpgart interface v0.103 [ 6.329614] loop: module loaded [
>> 6.329688] Uniform Multi-Platform E-IDE driver [ 6.329748] ide-gd
>> driver 1.18 [ 6.329965] Fixed MDIO Bus: probed [ 6.330054]
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [
>> 6.330377] ehci_hcd 0002:cc:01.2: EHCI Host Controller [ 6.330482]
>> ehci_hcd 0002:cc:01.2: new USB bus registered, assigned bus number
>> 1 [ 6.359167] ehci_hcd 0002:cc:01.2: irq 276, io mem 0x400f8002000
>> [ 6.379080] ehci_hcd 0002:cc:01.2: USB 2.0 started, EHCI 1.00 [
>> 6.379123] usb usb1: New USB device found, idVendor=1d6b,
>> idProduct=0002 [ 6.379134] usb usb1: New USB device strings: Mfr=3,
>> Product=2, SerialNumber=1 [ 6.379144] usb usb1: Product: EHCI Host
>> Controller [ 6.379152] usb usb1: Manufacturer: Linux
>> 3.3.4-5.fc17.ppc64 ehci_hcd [ 6.379162] usb usb1: SerialNumber:
>> 0002:cc:01.2 [ 6.379360] hub 1-0:1.0: USB hub found [ 6.379371] hub
>> 1-0:1.0: 5 ports detected [ 6.379544] ohci_hcd: USB 1.1 'Open' Host
>> Controller (OHCI) Driver [ 6.379863] ohci_hcd 0002:cc:01.0: OHCI
>> Host Controller [ 6.379950] ohci_hcd 0002:cc:01.0: new USB bus
>> registered, assigned bus number 2 [ 6.379992] ohci_hcd
>> 0002:cc:01.0: irq 276, io mem 0x400f8001000 [ 6.469078] usb usb2:
>> New USB device found, idVendor=1d6b, idProduct=0001 [ 6.469090] usb
>> usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [
>> 6.469100] usb usb2: Product: OHCI Host Controller [ 6.469108] usb
>> usb2: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd [ 6.469117]
>> usb usb2: SerialNumber: 0002:cc:01.0 [ 6.469293] hub 2-0:1.0: USB
>> hub found [ 6.469307] hub 2-0:1.0: 3 ports detected [ 6.469707]
>> ohci_hcd 0002:cc:01.1: OHCI Host Controller [ 6.469789] ohci_hcd
>> 0002:cc:01.1: new USB bus registered, assigned bus number 3 [
>> 6.469826] ohci_hcd 0002:cc:01.1: irq 276, io mem 0x400f8000000 [
>> 6.559067] usb usb3: New USB device found, idVendor=1d6b,
>> idProduct=0001 [ 6.559089] usb usb3: New USB device strings: Mfr=3,
>> Product=2, SerialNumber=1 [ 6.559099] usb usb3: Product: OHCI Host
>> Controller [ 6.559107] usb usb3: Manufacturer: Linux
>> 3.3.4-5.fc17.ppc64 ohci_hcd [ 6.559117] usb usb3: SerialNumber:
>> 0002:cc:01.1 [ 6.559313] hub 3-0:1.0: USB hub found [ 6.559326] hub
>> 3-0:1.0: 2 ports detected [ 6.559444] uhci_hcd: USB Universal Host
>> Controller Interface driver [ 6.559548] usbcore: registered new
>> interface driver usbserial [ 6.559568] USB Serial support
>> registered for generic [ 6.559593] usbcore: registered new
>> interface driver usbserial_generic [ 6.559603] usbserial: USB
>> Serial Driver core [ 6.559864] mousedev: PS/2 mouse device common
>> for all mice [ 6.560101] rtc-generic rtc-generic: rtc core:
>> registered rtc-generic as rtc0 [ 6.560241] device-mapper: uevent:
>> version 1.0.3 [ 6.560375] device-mapper: ioctl: 4.22.0-ioctl
>> (2011-10-19) initialised: dm-devel at redhat.com [ 6.560678] usbcore:
>> registered new interface driver usbhid [ 6.560686] usbhid: USB HID
>> core driver [ 6.560770] ip_tables: (C) 2000-2006 Netfilter Core
>> Team [ 6.560799] TCP cubic registered [ 6.560805] Initializing XFRM
>> netlink socket [ 6.561028] NET: Registered protocol family 10 [
>> 6.561241] Mobile IPv6 [ 6.561249] NET: Registered protocol family
>> 17 [ 6.561261] Registering the dns_resolver key type [ 6.564367]
>> registered taskstats version 1 [ 6.569260] rtc-generic rtc-generic:
>> setting system clock to 2012-06-29 07:52:05 UTC (1340956325) [
>> 6.569285] Initializing network drop monitor service [ 6.570795]
>> Freeing unused kernel memory: 6656k freed [ 6.887560] dracut:
>> dracut-018-35.git20120510.fc17 [ 6.946010] squashfs: version 4.0
>> (2009/01/31) Phillip Lougher [ 6.949762] Loading iSCSI transport
>> class v2.0-870. [ 6.951969] iscsi: registered transport (tcp) [
>> 6.954629] alua: device handler registered [ 6.957406] emc: device
>> handler registered [ 6.960033] hp_sw: device handler registered [
>> 6.962729] rdac: device handler registered ERROR: could not insert
>> 'floppy': No such device FATAL: Module edd not found. FATAL: Module
>> iscsi_ibft not found. [ 7.006626] md: raid0 personality registered
>> for level 0 [ 7.009711] md: raid1 personality registered for level
>> 1 [ 7.012442] async_tx: api initialized (async) [ 7.012691] xor:
>> measuring software checksum speed [ 7.059078] 8regs : 4812.800
>> MB/sec [ 7.109084] 8regs_prefetch: 5420.800 MB/sec [ 7.159080]
>> 32regs : 4249.600 MB/sec [ 7.209091] 32regs_prefetch: 5164.800
>> MB/sec [ 7.209099] xor: using function: 8regs_prefetch (5420.800
>> MB/sec) [ 7.369084] usb 3-1: new low-speed USB device number 2
>> using ohci_hcd [ 7.379115] raid6: int64x1 1441 MB/s [ 7.549092]
>> raid6: int64x2 2582 MB/s [ 7.594093] usb 3-1: New USB device found,
>> idVendor=046a, idProduct=0011 [ 7.594107] usb 3-1: New USB device
>> strings: Mfr=0, Product=0, SerialNumber=0 [ 7.611428] input: HID
>> 046a:0011 as
>> /devices/pci0002:00/0002:00:02.3/0002:cc:01.1/usb3/3-1/3-1:1.0/input/input0
>>
>>
>> [ 7.611584] generic-usb 0003:046A:0011.0001: input,hidraw0: USB
>> HID v1.11 Keyboard [HID 046a:0011] on usb-0002:cc:01.1-1/input0 [
>> 7.719076] raid6: int64x4 2479 MB/s [ 7.889105] raid6: int64x8 1366
>> MB/s [ 7.889113] raid6: using algorithm int64x2 (2582 MB/s) [
>> 7.891180] md: raid6 personality registered for level 6 [ 7.891190]
>> md: raid5 personality registered for level 5 [ 7.891199] md: raid4
>> personality registered for level 4 [ 7.899155] md: raid10
>> personality registered for level 10 [ 7.901771] md: linear
>> personality registered for level -1 [ 7.914146] device-mapper:
>> multipath: version 1.3.0 loaded [ 7.916774] device-mapper:
>> multipath round-robin: version 1.0.0 loaded Loading Fedora 17 ppc64
>> installer... [ 8.050404] dracut: livenet: no url handler for
>> CDLABEL=Fedora_17_ppc64 [ 8.054525] dracut: rd.luks=0: removing
>> cryptoluks activation [ 8.066573] dracut: root was
>> live:CDLABEL=Fedora_17_ppc64, is now
>> live:/dev/disk/by-label/Fedora_17_ppc64 [ 8.072219] dracut:
>> rd.lvm=0: removing LVM activation [ 8.140684] RPC: Registered named
>> UNIX socket transport module. [ 8.140698] RPC: Registered udp
>> transport module. [ 8.140706] RPC: Registered tcp transport
>> module. [ 8.140714] RPC: Registered tcp NFSv4.1 backchannel
>> transport module. [ 8.256825] udevd[223]: starting version 182 [
>> 8.274484] dracut: rd.dm=0: removing DM RAID activation [ 8.289771]
>> dracut: rd.md=0: removing MD RAID activation [ 8.425273]
>> pata_pdc2027x 0001:cc:01.0: enabling device (0002 -> 0003) [
>> 8.427299] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2
>> (April 27, 2011) [ 8.427448] ipr 0001:d0:01.0: Found IOA with IRQ:
>> 325 [ 8.445311] e1000: Intel(R) PRO/1000 Network Driver - version
>> 7.3.21-k8-NAPI [ 8.445324] e1000: Copyright (c) 1999-2006 Intel
>> Corporation. [ 8.445494] e1000 0002:d0:01.0: enabling device (0000
>> -> 0002) [ 8.525303] pata_pdc2027x 0001:cc:01.0: PLL input clock
>> 32754 kHz [ 8.556329] scsi1 : pata_pdc2027x [ 8.611225] ipr
>> 0001:d0:01.0: Starting IOA initialization sequence. [ 8.614090]
>> scsi2 : pata_pdc2027x [ 8.614195] ata1: PATA max UDMA/133 mmio
>> m16384 at 0x400b8000000 cmd 0x400b80017c0 irq 324 [ 8.614208] ata2:
>> PATA max UDMA/133 mmio m16384 at 0x400b8000000 cmd 0x400b80015c0 irq
>> 324 [ 8.616166] ipr 0001:d0:01.0: Adapter firmware version:
>> 0510006D [ 8.630506] ipr 0001:d0:01.0: IOA initialized. [ 8.630532]
>> scsi0 : IBM 573E Storage Adapter [ 8.650156] scsi 0:0:5:0:
>> Direct-Access IBM H0 HUS103073FL3800 RPQR PQ: 0 ANSI: 4 [ 8.657731]
>> scsi 0:0:15:0: Enclosure IBM VSBPD4E1 U4SCSI 6000 PQ: 0 ANSI: 2 [
>> 8.789678] ata1.00: ATAPI: IBM DROM00205L1 H0, P533, max UDMA/66 [
>> 8.794326] e1000 0002:d0:01.0: eth0: (PCI-X:133MHz:64-bit)
>> 00:14:5e:96:4b:18 [ 8.794343] e1000 0002:d0:01.0: eth0: Intel(R)
>> PRO/1000 Network Connection [ 8.794520] e1000 0002:d0:01.1:
>> enabling device (0000 -> 0002) [ 8.830542] ata1.00: configured for
>> UDMA/66 [ 8.830887] scsi: waiting for bus probes to complete ... [
>> 9.106307] sd 0:0:5:0: Attached scsi generic sg0 type 0 [ 9.106662]
>> scsi 0:0:15:0: Attached scsi generic sg1 type 13 [ 9.108220] sd
>> 0:0:5:0: [sda] 143374000 512-byte logical blocks: (73.4 GB/68.3
>> GiB) [ 9.109441] scsi 1:0:0:0: CD-ROM IBM DROM00205L1 H0 P533 PQ: 0
>> ANSI: 2 [ 9.110600] sr0: scsi3-mmc drive: 61x/61x cd/rw xa/form2
>> cdda tray [ 9.110611] cdrom: Uniform CD-ROM driver Revision: 3.20 [
>> 9.111136] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 9.129980]
>> sd 0:0:5:0: [sda] Write Protect is off [ 9.140895] e1000
>> 0002:d0:01.1: eth1: (PCI-X:133MHz:64-bit) 00:14:5e:96:4b:19 [
>> 9.140911] e1000 0002:d0:01.1: eth1: Intel(R) PRO/1000 Network
>> Connection [ 9.143023] sd 0:0:5:0: [sda] Write cache: disabled,
>> read cache: enabled, supports DPO and FUA [ 9.183974] sda: sda1
>> sda2 sda3 [ 9.211915] sd 0:0:5:0: [sda] Attached SCSI disk [
>> 9.280923] scsi: unknown device type 31 [ 9.280937] scsi
>> 0:255:255:255: No Device IBM 573E001 0150 PQ: 0 ANSI: 0 [ 9.282952]
>> scsi 0:255:255:255: Attached scsi generic sg3 type 31 [ 10.948577]
>> EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
>> (null) [ 11.356800] dracut: Mounted root filesystem
>> /dev/mapper/live-rw rpcbind: rpcbind terminating on signal. Restart
>> with "rpcbind -w" [ 12.390384] dracut: Switching root [ 14.663148]
>> SELinux: Permission ptrace_child in class process not defined in
>> policy. [ 14.663409] SELinux: the above unknown classes and
>> permissions will be allowed [ 14.852679] type=1403
>> audit(1340956333.769:2): policy loaded auid=4294967295
>> ses=4294967295
>>
>> Welcome to Linux!
>>
>> Started Lock Directory [ OK ] Starting File System Check on Root
>> Device... Starting Remount API VFS... Starting Media Directory...
>> Started Runtime Directory [ OK ] Starting Monitoring of LVM2
>> mirrors, snapshots etc. using d...ogress polling... Starting
>> Software RAID Monitor Takeover... Starting Apply Kernel
>> Variables... Started Load Kernel Modules [ OK ] Started Set Up
>> Additional Binary Formats [ OK ] Starting POSIX Message Queue File
>> System... Started FUSE Control File System [ OK ] Starting Security
>> File System... Starting Debug File System... Starting Journal
>> Service... Started Journal Service [ OK ] Starting Huge Pages File
>> System... Starting Configuration File System... Starting udev
>> Coldplug all Devices... Starting udev Kernel Device Manager...
>> Starting Setup Virtual Console... Started udev Kernel Device
>> Manager [ OK ] Started File System Check on Root Device [ OK ]
>> Failed to start Remount API VFS [FAILED] See 'systemctl status
>> systemd-remount-api-vfs.service' for details. Started Media
>> Directory [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc.
>> u...rogress polling [ OK ] Started Software RAID Monitor Takeover
>> [ OK ] Started Apply Kernel Variables [ OK ] Started POSIX Message
>> Queue File System [ OK ] Started Security File System [ OK ]
>> Started Debug File System [ OK ] Started Huge Pages File System [
>> OK ] Started Configuration File System [ OK ] Started Setup Virtual
>> Console [ OK ] Started udev Coldplug all Devices [ OK ] Starting
>> udev Wait for Complete Device Initialization... Starting Remount
>> Root FS... Started Remount Root FS [ OK ] Started Import network
>> configuration from initramfs [ OK ] Starting Tell Plymouth To Write
>> Out Runtime Data... Starting Load Random Seed... Starting Configure
>> read-only root support... Started udev Wait for Complete Device
>> Initialization [ OK ] Started Tell Plymouth To Write Out Runtime
>> Data [ OK ] Started Load Random Seed [ OK ] Started Configure
>> read-only root support [ OK ] Starting Recreate Volatile Files and
>> Directories... Starting Show Plymouth Boot Screen... Failed to
>> start Show Plymouth Boot Screen [FAILED] See 'systemctl status
>> plymouth-start.service' for details. Started Recreate Volatile
>> Files and Directories [ OK ] Started anaconda performance monitor
>> [ OK ] Starting System Logging Service... Starting Network
>> Manager... Starting Terminate Plymouth Boot Screen... Starting Wait
>> for Plymouth Boot Screen to Quit... Started Terminate Plymouth Boot
>> Screen [ OK ] Started Wait for Plymouth Boot Screen to Quit [ OK ]
>> Starting Shell on tty2... Started Shell on tty2 [ OK ] Starting
>> Shell on hvc1... Started Shell on hvc1 [ OK ] Starting D-Bus System
>> Message Bus... Stopped systemd-kmsg-syslogd.service [ OK ] Started
>> System Logging Service [ OK ] Started D-Bus System Message Bus [ OK
>> ] Started Network Manager [ OK ]
>>
>> 07:52:41 Starting VNC... Traceback (most recent call last): File
>> "/usr/sbin/anaconda", line 804, in <module> setupDisplay(anaconda,
>> opts) File "/usr/sbin/anaconda", line 587, in setupDisplay
>> runVNC(vncS) File "/usr/sbin/anaconda", line 331, in runVNC
>> vncS.startServer() File
>> "/usr/lib64/python2.7/site-packages/pyanaconda/vnc.py", line 190,
>> in startServer self.initialize() File
>> "/usr/lib64/python2.7/site-packages/pyanaconda/vnc.py", line 113,
>> in initialize if self.ip.find(':') != -1: AttributeError:
>> 'NoneType' object has no attribute 'find' EPOW <0x64400400000006c
>> 0x0 0x0>