Bootable USB flash drive for F19 for IBM 812L
Dan HorĂ¡k
dan at danny.cz
Sun Feb 15 14:55:25 UTC 2015
Hi Bryson,
On Tue, 10 Feb 2015 23:42:44 +0000
Bryson Lee <Bryson.Lee at sslmda.com> wrote:
> I'm trying to construct a bootable USB stick for installing F19 on an
> IBM 812L. So far nothing I've tried has produced anything that the
> system will recognize as bootable media (i.e. the USB port/drive
> doesn't appear as an option in the SMS boot-device menus). The
> non-solutions so far are:
>
> - dd a mock/pungi-generated installation iso to the USB stick
> - format the stick as VFAT and _copy_ the iso contents to it
> - construct a disk image containing a small bootable PReP partition
> with the yaboot binary dd'd into it and an ext3 partition with the
> iso contents in it. Then dd the entire image file to the USB stick
> and confirm that the partition table and contents are as expected...
>
> Is there something else I should try?
first I would start with F-21 as F-19 reached its end of life. There is
also an updated grub.conf in F-21 on the ISO that should work with older
petitboot/firmware. Then dd-ing the ISO to the USB stick should just
work.
Dan
More information about the ppc
mailing list