Package: freeradius-2.1.11-2.fc16 Tag: None Status: complete Built by: sharkcz
S390 Koji Build System
buildsys at fedoraproject.org
Fri Jul 1 06:26:54 UTC 2011
Package: freeradius-2.1.11-2.fc16
Tag: None
Status: complete
Built by: sharkcz
ID: 69800
Started: Thu, 30 Jun 2011 23:11:59 EDT
Finished: Thu, 30 Jun 2011 23:26:20 EDT
Changelog:
* Thu Jun 23 2011 John Dennis <jdennis at redhat.com> - 2.1.11-2
- reload the server (i.e. HUP) after logrotate
* Wed Jun 22 2011 John Dennis <jdennis at redhat.com> - 2.1.11-1
- Upgrade to latest upstream release: 2.1.11
- Remove the following two patches as upstream has incorporated them:
freeradius-radtest-ipv6.patch
freeradius-lt-dladvise.patch
- Upstream changelog for 2.1.11:
Feature improvements
* Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
All vendors need to read it and follow its directions.
* Microsoft SoH support for PEAP from Phil Mayers.
See doc/SoH.txt
* Certificate "bootstrap" script now checks for certificate expiry.
See comments in raddb/eap.conf, and then "make_cert_command".
* Support for dynamic expansion of EAP-GTC challenges.
Patch from Alexander Clouter.
* OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp"
section.
* Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
* Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
* Experimental redis support from Gabriel Blanchard.
See raddb/modules/redis and raddb/modules/rediswho
* Add "key" to rlm_fastusers. Closes bug #126.
* Added scripts/radtee from original software at
http://horde.net/~jwm/software/misc/comparison-tee
* Updated radmin "man" page for new commands.
* radsniff now prints the hex decoding of the packet (-x -x -x)
* mschap module now reloads its configuration on HUP
* Added experimental "replicate" module. See raddb/modules/replicate
* Policy "foo" can now refer to module "foo". This lets you
over-ride the behavior of a module.
* Policy "foo.authorize" can now over-ride the behavior of module
"foo", "authorize" method.
* Produce errors in more situations when the configuration files
have invalid syntax.
Bug fixes
* Ignore pre/post-proxy sections if proxying is disabled
* Add configure checks for pcap_fopen*.
* Fix call to otp_write in rlm_otp
* Fix issue with Access-Challenge checking from 2.1.10, when the
debug flag was set after server startup. Closes #116 and #117.
* Fix typo in zombie period start time.
* Fix leak in src/main/valuepair.c. Patch from James Ballantine.
* Allow radtest to use spaces in shared secret.
Patch from Cedric Carree.
* Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
Patch from James Ballantine.
* Remove MN-FA key generation. The NAS does this, not AAA.
Patch from Ben Weichman.
* Include dictionary.mikrotik by default. Closes bug #121.
* Add group membership query to MS-SQL examples. Closes bug #120.
* Don't cast NAS-Port to integer in Postgresql queries.
Closes bug #112.
* Fixes for libtool and autoconf from Sam Hartman.
* radsniff should read the dictionaries in more situations.
* Use fnmatch to check for detail file reader==writer.
Closes bug #128.
* Check for short writes (i.e. disk full) in rlm_detail.
Closes bug #130. Patches and testing from John Morrissey.
* Fix typo in src/lib/token.c. Closes bug #124
* Allow workstation trust accounts to use MS-CHAP.
Closes bug #123.
* Assigning foo=`/bin/echo hello` now produces a syntax error
if it is done outside of an "update" section.
* Fix "too many open file descriptors" problem when using
"verify client" in eap.conf.
* Many fixes to dialup_admin for PHP5, by Stefan Winter.
* Allow preprocess module to have "hints = " and "huntgroups =",
which allows them to be empty or non-existent.
* Renamed "php3" files to "php" in dialup_admin/
* Produce error when sub-TLVs are used in a dictionary. They are
supported only in the "master" branch, and not in 2.1.x.
* Minor fix in dictionary.redback. Closes bug #138.
* Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129.
* Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
Closes bug #118.
* DHCP fixes to send unicast packets in more situations.
* Fix to udpfromto, to enable it to work on IPv6 networks.
* Fixes to the Oracle accounting_onoff_query.
* When using both IPv4 and IPv6 home servers, ensure that we use the
correct local socket for proxying. Closes bug #143.
* Suppress messages when thread pool is nearly full, all threads
are busy, and we can't create new threads.
* IPv6 is now enabled for udpfromto. Closes bug #141
* Make sqlippool query buffer the same size as sql module.
Closes bug #139.
* Make Coa / Disconnect proxying work again.
* Configure scripts for rlm_caching from Nathaniel McCallum
* src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
* Updated password routines to use time-insensitive comparisons.
This prevents timing attacks (though none are known).
* Allow sqlite module to do normal SELECT queries.
* rlm_wimax now has a configure script
* Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
files. See share/dictionary for explanations.
* Check for duplicate module definitions in the modules{} section,
and refuse to start if duplicates are found.
* Check for duplicate virtual servers, and refuse to start if
duplicates are found.
* Don't use udpfromto if source is INADDR_ANY. Closes bug #148.
* Check pre-conditions before running radmin "inject file".
* Don't over-ride "no match" with "match" for regexes.
Closes bug #152.
* Make retry and error message configurable in mschap.
See raddb/modules/mschap
* Allow EAP-MSCHAPv2 to send error message to client. This change
allows some clients to prompt the user for a new password.
See raddb/eap.conf, mschapv2 section, "send_error".
* Load the default virtual server before any others.
This matches what users expect, and reduces confusion.
* Fix configure checks for udpfromto. Fixes Debian bug #606866
* Definitive fix for bug #35, where the server could crash under
certain loads. Changes src/lib/packet.c to use RB trees.
* Updated "configure" checks to allow IPv6 udpfromto on Linux.
* SQL module now returns NOOP if the accounting start/interim/stop
queries don't do anything.
* Allow %{outer.control: ... } in string expansions
* home_server coa config now matches raddb/proxy.conf
* Never send a reply to a DHCP Release.
* Thu Jun 16 2011 Marcela MaÅ¡láÅová <mmaslano at redhat.com> - 2.1.10-8
- Perl mass rebuild
SRPMS:
freeradius-2.1.11-2.fc16.src.rpm
Closed tasks:
-------------
Task 420492 on devel1.s390.bos.redhat.com
Task Type: build (None, freeradius-2.1.11-2.fc16.src.rpm)
Task 420494 on devel1.s390.bos.redhat.com
Task Type: buildArch (freeradius-2.1.11-2.fc16.src.rpm, s390)
logs:
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420494&name=build.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420494&name=mock_output.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420494&name=root.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420494&name=state.log
rpms:
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-debuginfo-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-krb5-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-ldap-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-mysql-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-perl-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-postgresql-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-python-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-unixODBC-2.1.11-2.fc16.s390.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390/freeradius-utils-2.1.11-2.fc16.s390.rpm
Task 420495 on fedora3.s390.bos.redhat.com
Task Type: buildArch (freeradius-2.1.11-2.fc16.src.rpm, s390x)
logs:
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420495&name=build.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420495&name=mock_output.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420495&name=root.log
http://s390.koji.fedoraproject.org/koji/getfile?taskID=420495&name=state.log
rpms:
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-debuginfo-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-krb5-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-ldap-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-mysql-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-perl-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-postgresql-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-python-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-unixODBC-2.1.11-2.fc16.s390x.rpm
http://s390pkgs.fedoraproject.org/packages/freeradius/2.1.11/2.fc16/s390x/freeradius-utils-2.1.11-2.fc16.s390x.rpm
Task Info: http://s390.koji.fedoraproject.org/koji/taskinfo?taskID=420492
Build Info: http://s390.koji.fedoraproject.org/koji/buildinfo?buildID=69800
More information about the s390-builds
mailing list