rpms/xtide/FC-5 xtide-2.9dev-rcinit.diff, NONE, 1.1 xtide-README.fedora, NONE, 1.1 xtide-get_harmonics-data.sh, NONE, 1.1 xttpd-wrapper.sh, NONE, 1.1 xttpd.conf, NONE, 1.1 .cvsignore, 1.3, 1.4 sources, 1.3, 1.4 xtide.spec, 1.10, 1.11 xtide-2.8.for_x86_64.patch, 1.1, NONE xtide.desktop, 1.1, NONE
Mamoru Tasaka (mtasaka)
fedora-extras-commits at redhat.com
Tue Nov 28 23:59:08 UTC 2006
Author: mtasaka
Update of /cvs/extras/rpms/xtide/FC-5
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv8614
Modified Files:
.cvsignore sources xtide.spec
Added Files:
xtide-2.9dev-rcinit.diff xtide-README.fedora
xtide-get_harmonics-data.sh xttpd-wrapper.sh xttpd.conf
Removed Files:
xtide-2.8.for_x86_64.patch xtide.desktop
Log Message:
* Sun Nov 26 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.2.date20061122
- Ensure the hardcorded directories in some scripts can be
appropriately changed.
- Fix some typo in README.fedora
xtide-2.9dev-rcinit.diff:
--- NEW FILE xtide-2.9dev-rcinit.diff ---
--- rc.xttpd.fedora 2006-11-23 07:22:31.000000000 +0900
+++ rc.xttpd 2006-11-23 20:33:49.000000000 +0900
@@ -26,22 +26,15 @@
start(){
echo -n $"Starting $PROG: "
if ! test -f "$DAEMON" ; then
- echo $"$DAEMON is not set." >&2
- echo_failure
+ echo -n $"$DAEMON is not set."
+ failure
echo
RETVAL=1
return $RETVAL
fi
if test -z "$PORT" ; then
- echo $"PORT environment is not set." >&2
- echo_failure
- echo
- RETVAL=1
- return $RETVAL
- fi
- if test -z "$HOME" ; then
- echo $"HOME environment is not set." >&2
- echo_failure
+ echo -n $"PORT environment is not set."
+ failure
echo
RETVAL=1
return $RETVAL
@@ -100,3 +93,4 @@
esac
exit $?
+
--- NEW FILE xtide-README.fedora ---
================================================
# xtide-README.fedora
# Written by Patrice Dumas and Mamoru Tasaka
# If you have some questions, please report it
# with redhat bugzilla:
# https://bugzilla.redhat.com/bugzilla/index.cgi
================================================
Availability and installation of harmonics files
================================================
To use xtide and related utilities (like xttpd,
tideEditor), you need an harmonics file.
However, existing files cannot be distributed as part of Fedora,
because their license restricts commercial redistribution and selling,
which is too restrictive for Fedora. These files should therefore
be installed after the package installation by yourself.
Such files are available at:
http://www.flaterco.com/xtide/files.html
As the time of writing, the latest harmonics file is:
ftp://ftp.flaterco.com/xtide/harmonics-dwf-20060708.tcd.bz2
The utilities can only use uncompressed harmonics files.
There are 2 possibilities to have the utilities become aware of
the harmonics file location:
1) by editing /etc/xtide.conf, and setting the first line of the file
to the path of the directory containing the harmonics files, or
to the harmonics file location (the utilities will also accept a colon `:'
delimited list of paths).
The second line of /etc/xtide.conf sets the directory which
contains world vector shoreline data. The second line can accept only
one directory and cannot be colon-delimited.
The default content of /etc/xtide.conf used by fedora is:
/usr/share/xtide-harmonics/
/usr/share/wvs-data/
which means that all the files in /usr/share/xtide-harmonics
are considered to be harmonics files and all under /usr/share/wvs-data
are considered to be WVS data.
2) by setting the environment variable HFILE_PATH. You can also
set WVS_PATH to specify the directory under which WVS data are
stored.
You can run the provided script xtide-get_harmonics-data.sh
under /usr/sbin to install harmonics files to
/usr/share/xtide-harmonics. This script requires
administrator previledges.
--- NEW FILE xtide-get_harmonics-data.sh ---
#!/bin/sh
DATE=${DATE:-20060708}
INSTALL_DIR=${INSTALL_DIR:-/usr/share/xtide-harmonics/}
FILE=harmonics-dwf-${DATE}.tcd.bz2
if [ "`id -u -n`" != "root" ] ; then
echo "You must do this by root"
exit 1
fi
wget -N ftp://ftp.flaterco.com/xtide/$FILE || \
( echo ; echo "Downloading failed." ; exit 1 )
bzip2 -d $FILE
mkdir -p $INSTALL_DIR
install -m 644 harmonics-dwf-${DATE}.tcd $INSTALL_DIR
rm -f ${FILE%.bz2}
--- NEW FILE xttpd-wrapper.sh ---
#!/bin/sh
unset XTTPD_ARG
for ARG in $* ; do
case $ARG in
*=* )
eval export $ARG
;;
* )
XTTPD_ARG="$XTTPD_ARG $ARG"
;;
esac
done
exec /usr/libexec/xttpd $XTTPD_ARG
--- NEW FILE xttpd.conf ---
# Originally from debian.
# The following is from debian's comment.
#---------------------------------------------------------
#
# skeleton example file to build /etc/init.d/ scripts.
# This file should be used to construct scripts for /etc/init.d.
#
# Written by Miquel van Smoorenburg <miquels at cistron.nl>.
# Modified for Debian GNU/Linux
# by Ian Murdock <imurdock at gnu.ai.mit.edu>.
#
# Version: @(#)skeleton 1.6 11-Nov-1996 miquels at cistron.nl
#
# This file by Peter S Galbraith <psg at debian.org> for the xtide package.
#---------------------------------------
# Configuration:
#
# Uncommenting the PORT line below enables this daemon at bootup.
# To start the server after uncommenting the line, there is no need
# to reboot, simply invoke:
# # /etc/init.d/xttpd start
#
# PORT: Port number used by xttpd
# - If you use 80, xttpd will be your standard web server and will be
# visible as http://localhost (Make sure no other web server is installed)
# - Alternatively, use a higher unprivileged port number (e.g. 8080) to have
# xttpd running in addition to a standard web server. xttpd would then
# be visble as http://localhost:8080/
# XTTPD_FEEDBACK:
# - Set the environment variable XTTPD_FEEDBACK to change the feedback
# address email address.
#PORT=8080
#XTTPD_FEEDBACK=user at your.site
#-Edit-lines-above-and-uncomment--------
Index: .cvsignore
===================================================================
RCS file: /cvs/extras/rpms/xtide/FC-5/.cvsignore,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- .cvsignore 8 Jan 2005 06:27:05 -0000 1.3
+++ .cvsignore 28 Nov 2006 23:58:38 -0000 1.4
@@ -1,2 +1 @@
-harmonics-dwf-2004-12-10-v2.tcd.gz
-xtide-2.8.tar.gz
+xtide-2.9-0.2.date20061122.fc6.src.rpm
Index: sources
===================================================================
RCS file: /cvs/extras/rpms/xtide/FC-5/sources,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- sources 8 Jan 2005 06:27:05 -0000 1.3
+++ sources 28 Nov 2006 23:58:38 -0000 1.4
@@ -1,2 +1 @@
-cc55cdf906c9cb5e7938731391f486e0 harmonics-dwf-2004-12-10-v2.tcd.gz
-17e34e7d7fc1dcf7b564b2970f821d0e xtide-2.8.tar.gz
+aaf397a58557feb1fdf3096900edd155 xtide-2.9-0.2.date20061122.fc6.src.rpm
Index: xtide.spec
===================================================================
RCS file: /cvs/extras/rpms/xtide/FC-5/xtide.spec,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -r1.10 -r1.11
--- xtide.spec 26 Feb 2006 07:51:41 -0000 1.10
+++ xtide.spec 28 Nov 2006 23:58:38 -0000 1.11
@@ -1,23 +1,55 @@
-Summary: Calculate tide all over the world
-Name: xtide
-Version: 2.8
-Release: 4
-
-URL: http://www.flaterco.com/xtide/
-Source0: ftp://ftp.flaterco.com/xtide/%{name}-%{version}.tar.gz
-Source1: ftp://ftp.flaterco.com/xtide/harmonics-dwf-2004-12-10-v2.tcd.gz
-Source2: %{name}.desktop
-Patch0: %{name}-%{version}.for_x86_64.patch
-License: GPL
-Group: Applications/Engineering
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-BuildRequires: libpng-devel
-BuildRequires: XFree86-devel
-BuildRequires: zlib-devel
-Buildrequires: desktop-file-utils
-Buildrequires: flex
-Buildrequires: bison
-Provides: xttpd = %{version}-%{release}
+%{!?with_harmonics: %define with_harmonics 0}
+%define src_date 20061122
+
+Summary: Calculate tide all over the world
+Name: xtide
+Version: 2.9
+Release: 0.2.date%{src_date}%{?dist}
+
+URL: http://www.flaterco.com/xtide/
+Source0: ftp://ftp.flaterco.com/xtide/%{name}-%{version}dev-%{src_date}.tar.bz2
+%if %{with_harmonics}
+Source1: http://harmonics.unh.edu/xtide/harmonics.txt.gz
+%endif
+
+Patch18: xtide-2.9dev-rcinit.diff
+
+Source11: xttpd.conf
+Source14: xtide-get_harmonics-data.sh
+Source15: xttpd-wrapper.sh
+Source20: %{name}.desktop
+Source30: xtide-README.fedora
+
+License: GPL
+Group: Applications/Engineering
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+
+BuildRequires: autoconf
+
+BuildRequires: libXaw-devel
+BuildRequires: libXext-devel
+BuildRequires: libpng-devel
+BuildRequires: zlib-devel
+Buildrequires: desktop-file-utils
+BuildRequires: libtcd-devel
+%if %{with_harmonics}
+BuildRequires: tcd-utils
+%endif
+Requires: wvs-data
+Requires: xtide-common
+
+Requires(pre): %{_sbindir}/useradd
+Requires(preun): /sbin/service
+Requires(preun): /sbin/chkconfig
+Requires(postun): /sbin/service
+Requires(post): /sbin/chkconfig
+
+%package common
+Summary: Xtide common files
+Group: Applications/Engineering
+License: Public Domain
+Requires: bzip2
+Requires: wget
%description
XTide is a package that provides tide and current
@@ -25,10 +57,10 @@
calendars can be generated, or a tide clock can be provided on your
desktop.
-XTide can work with X-windows, plain text terminals, or the web. This
+XTide can work with X-windows, plain text terminals, or the web. This
is accomplished with three separate programs: the interactive
interface (xtide), the non-interactive or command line interface
-(tide), and the web interface (xttpd).
+(tide), and the web interface.
The algorithm that XTide uses to predict tides is the one used by the
National Ocean Service in the U.S. It is significantly more accurate
@@ -37,7 +69,8 @@
algorithm -- you also need some special data for each and every
location for which you want to predict tides. XTide reads this data
from harmonics files. See http://www.flaterco.com/xtide/files.html
-for details on where to get these.
+for details on where to get these (note: please also see README.fedora
+in common package for Fedora specific issue.).
Ultimately, XTide's predictions can only be as good as the available
harmonics data. Due to issues of data availability and of
@@ -49,88 +82,253 @@
* Deviations of 1 minute from official predictions are typical for
U.S. locations having the latest data.
-
* Deviations of 20 minutes are typical for non-U.S. locations or
U.S. locations that are using obsolete data.
-
* Much longer deviations indicate a problem.
-%prep
-cat<<EOT
-
-Build disabled. Package is without maintainer.
+%description common
+This package contains common files needed by xtide, xttpd and
+tideEditor.
+Please read README.fedora for Fedora specific issue.
-EOT
-exit 1
-
-%setup -q -T -b 0
-
-%ifarch x86_64
-%patch0 -p1 -b .buildroot
-%endif
+%prep
+%setup -q -n %{name}-2.9dev
-cp %{SOURCE1} ./
-cp %{SOURCE2} ./
+pushd scripts/Fedora
+%patch18 -p0 -b .fedora
+popd
%build
+export xttpd_user=xttpd
+export xttpd_group=xttpd
%configure
-make %{?_smp_mflags}
+%{__make} %{?_smp_mflags}
+
+# harmonics file
+%if %{with_harmonics}
+%{__install} -c -p -m 644 %{SOURCE1} .
+%{__gzip} -d harmoni*
+
+for f in harmonics*.txt ; do
+ TCD=${f%.txt}.tcd
+done
-# Unzip harmonics file
-gunzip harmonics-dwf-2004-12-10-v2.tcd.gz
+build_tide_db $TCD harmonics-*.txt &> harmonics.out
+%endif
-echo "%{_datadir}/%{name}/harmonics-dwf-2004-12-10-v2.tcd" > %{name}.conf
+echo "%{_datadir}/xtide-harmonics/" > %{name}.conf
+echo "%{_datadir}/wvs-data/" >> %{name}.conf
%install
-rm -rf $RPM_BUILD_ROOT
+%{__rm} -rf $RPM_BUILD_ROOT
+%{__mkdir_p} $RPM_BUILD_ROOT
+
+# 1. install xtide
+%{__make} DESTDIR=$RPM_BUILD_ROOT install
+
+%{__mkdir_p} $RPM_BUILD_ROOT%{_sbindir}
+%{__mkdir_p} $RPM_BUILD_ROOT%{_libexecdir}
+
+# xttpd treatment
+# xttpd is wrapped
+%{__install} -c -p -m 755 %{SOURCE14} \
+ $RPM_BUILD_ROOT%{_sbindir}
+%{__mv} $RPM_BUILD_ROOT%{_sbindir}/xttpd $RPM_BUILD_ROOT%{_libexecdir}
+%{__install} -c -p -m 755 %{SOURCE15} $RPM_BUILD_ROOT%{_sbindir}/xttpd
+# ensure xttpd binary installation directory (original
+# wrapper script is hardcorded
+%{__sed} -i -e 's|/usr/libexec|%{_libexecdir}|' \
+ $RPM_BUILD_ROOT%{_sbindir}/xttpd
+
+
+# 1A Install harmonics file
+%{__mkdir_p} ${RPM_BUILD_ROOT}%{_datadir}/%{name}
+%{__mkdir_p} ${RPM_BUILD_ROOT}%{_datadir}/%{name}-harmonics
+%if %{with_harmonics}
+%{__install} -c -p -m 644 harmonics*.tcd \
+ ${RPM_BUILD_ROOT}%{_datadir}/%{name}-harmonics/
+%endif
-%makeinstall
+# 1B Add configuration file
+%{__mkdir_p} ${RPM_BUILD_ROOT}%{_sysconfdir}
+%{__install} -c -p -m 644 %{name}.conf ${RPM_BUILD_ROOT}%{_sysconfdir}/
+
+# 1C Add desktop entry (xtide)
+%{__mkdir_p} $RPM_BUILD_ROOT%{_datadir}/applications
+desktop-file-install \
+ --vendor fedora \
+ --dir $RPM_BUILD_ROOT%{_datadir}/applications \
+ --remove-category Application \
+ %{SOURCE20}
+
+# 1D Install icon
+for f in iconsrc/icon_*_orig.png ; do
+ %{__install} -c -p -m 644 $f $RPM_BUILD_ROOT%{_datadir}/%{name}/
+done
+%{__mkdir_p} $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/
+%{__mkdir_p} $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/48x48/apps/
+%{__ln_s} -f ../../../../%{name}/icon_16x16_orig.png \
+ $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/%{name}.png
+%{__ln_s} -f ../../../../%{name}/icon_48x48_orig.png \
+ $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/48x48/apps/%{name}.png
+
+# 1E install xttpd conf file
+%{__mkdir_p} $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d
+%{__mkdir_p} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
+%{__mkdir_p} $RPM_BUILD_ROOT%{_sysconfdir}/xtide
+%{__install} -c -p -m 755 scripts/Fedora/rc.xttpd \
+ $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/xttpd
+%{__install} -c -p -m 644 %{SOURCE11} \
+ $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/xttpd
-# Install harmonics file.
-mkdir -p ${RPM_BUILD_ROOT}%{_datadir}/%{name}
-install -m 644 harmonics-dwf-2004-12-10-v2.tcd ${RPM_BUILD_ROOT}%{_datadir}/%{name}/
-
-# Add configuration file
-mkdir ${RPM_BUILD_ROOT}%{_sysconfdir}
-install -m 644 %{name}.conf ${RPM_BUILD_ROOT}%{_sysconfdir}/%{name}.conf
-
-# Add desktop entry
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
-desktop-file-install --vendor fedora --delete-original \
- --dir $RPM_BUILD_ROOT%{_datadir}/applications \
- --add-category X-Fedora \
- %{name}.desktop
+# 1F and others
+%{__install} -c -p -m 644 %{SOURCE30} README.fedora
%clean
-rm -rf $RPM_BUILD_ROOT
+%{__rm} -rf $RPM_BUILD_ROOT
-%files
-
-%defattr(-,root,root,-)
+%post
+touch --no-create %{_datadir}/icons/hicolor || :
+%{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || :
+
+/sbin/chkconfig --add xttpd
+
+%postun
+touch --no-create %{_datadir}/icons/hicolor || :
+%{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || :
+
+if [ $1 -ge 1 ] ; then
+ /sbin/service xttpd condrestart &>/dev/null || :
+fi
+
+%pre
+%{_sbindir}/useradd \
+ -c "XTide web server" \
+ -d %{_sysconfdir}/%{name} \
+ -r \
+ -s /sbin/nologin \
+ xttpd 2>/dev/null || :
+
+%preun
+if [ $1 = 0 ] ; then
+ /sbin/service xttpd stop &>/dev/null
+ /sbin/chkconfig --del xttpd
+fi
+
+%files common
+%doc README.fedora
+%config(noreplace) %{_sysconfdir}/%{name}.conf
-# Documentation
-%doc DOCUMENTATION/{GPL,qui,ver}*
-%{_mandir}/man1/*
-%{_mandir}/man8/*
-
-# Harmonics dir
%dir %{_datadir}/%{name}
+%dir %{_datadir}/%{name}-harmonics
+%dir %{_sysconfdir}/%{name}
+%if %{with_harmonics}
+%{_datadir}/%{name}-harmonics/harmonics*.tcd
+%endif
-# TCD file
-%config(missingok) %{_datadir}/%{name}/harmonics-dwf-2004-12-10-v2.tcd
-
-# Config file
-%config(noreplace) %{_sysconfdir}/*
+%{_sbindir}/xtide-get*.sh
-# Desktop entry
-%{_datadir}/applications/*
+%files
+%defattr(-,root,root,-)
-# Executables
-%{_bindir}/*
-%{_sbindir}/*
+%doc AUTHORS COPYING README README-QUICK
+# xtide
+%{_mandir}/man1/*tide.1*
+
+%{_datadir}/applications/fedora-%{name}.desktop
+%{_datadir}/icons/hicolor/*/apps/%{name}.png
+%{_datadir}/%{name}/icon_*_orig.png
+
+%{_bindir}/*tide
+
+# xttpd
+%config(noreplace) %{_sysconfdir}/sysconfig/xttpd
+%{_sysconfdir}/rc.d/init.d/xttpd
+
+%{_sbindir}/xttpd
+%{_libexecdir}/xttpd
+%{_datadir}/man/man8/xttpd.8*
%changelog
+* Sun Nov 26 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.2.date20061122
+- Ensure the hardcorded directories in some scripts can be
+ appropriately changed.
+- Fix some typo in README.fedora
+
+* Thu Nov 23 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.1.date20061122
+- 2.9 dev 20061122 release
+
+* Mon Nov 20 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.1.dev1
+- Version down temporarily
+- re-split libtcd, tcd-utils (see bug 211626)
+- again include xttpd
+
+* Sun Oct 29 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.14.dev20061027
+- xtide-2.9dev20061029, tcd-utils-1.3.11(2005-08-11),
+ update patches.
+- Remove -DCOMPAT114 as required by newer tcd-utils
+- Bump somajor of tcd-utils for API change.
+
+* Fri Oct 27 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.13.dev20061015
+- Fix some change in xtide-2.9dev-change-uidgid.patch
+
+* Fri Oct 27 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.12.dev20061015
+- More restrictive uid/gid mode for xttpd
+- Another fix for xttpd.init
+
+* Thu Oct 26 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.11.dev20061015
+- Other fixes for xttpd.init, xttpd.conf
+- Create "xttpd" user and use xttpd user for daemon.
+
+* Wed Oct 25 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.10.dev20061015
+- xtide doesn't need wrapperd, however, xttpd does.
+- Fix xttpd init script
+
+* Wed Oct 25 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.9.dev20061015
+- Adjustment for WVS data directory change.
+
+* Wed Oct 25 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.8.dev20061015
+- Split WVS data.
+- desktop-file-utils 0.11 change: X-Fedora, Application is no longer
+ accepted (will be fixed in rawhide).
+
+* Wed Oct 25 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.7.dev20061015
+- Drop harmonics data for now.
+- Define WVS_DIR, then rewrite tideEditor-wrapper.sh and wrap xtide
+- Add fedora-specific document
+- Include WVS data
+
+* Sun Oct 22 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.6.dev20061015
+- Install 48x48 icon as well.
+
+* Sun Oct 22 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.5.dev20061015
+- Use icon in xtide source
+- Fix Group entry
+- Re-source profile shell script for easier rebuilding
+
+* Sun Oct 22 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.4.dev20061015
+- Introduce common files package.
+- CFLAGS treatment change.
+- Treak configuration files and their locations.
+
+* Sat Oct 21 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.3.dev20061015
+- Various changes about compilation optflags.
+- Change libtcd soname numbering
+- Sprit xttpd, include scripts
+- tideEditor wrapper script included and desktop files added.
+- use "/sbin/ldconfig -n"
+- Lots of help from Michael Schwendt and Patrice Dumas, thanks!!
+
+* Sat Oct 21 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.2.dev20061015
+- Re-unify libtcd and xtide, and include tcd-utils,
+ build all at once.
+
+* Fri Oct 20 2006 Mamoru Tasaka <mtasaka at ioa.s.u-tokyo.ac.jp> - 2.9-0.1.dev20061015
+- Resubmit to Fedora Extras (bug #211626)
+- Split libtcd to another package, require tcd-utils to
+ rebuild tcd data.
+
* Sun May 22 2005 Jeremy Katz <katzj at redhat.com> - 2.8-4
- rebuild on all arches
--- xtide-2.8.for_x86_64.patch DELETED ---
--- xtide.desktop DELETED ---
More information about the scm-commits
mailing list