rpms/kernel/devel linux-2.6-ath5k-use-soft-wep.patch, NONE, 1.1 kernel.spec, 1.270, 1.271 linux-2.6-wireless-pending.patch, 1.14, 1.15
John W. Linville (linville)
fedora-extras-commits at redhat.com
Sat Dec 1 18:45:05 UTC 2007
- Previous message: rpms/cfengine/F-8 .cvsignore, 1.15, 1.16 cfengine.spec, 1.28, 1.29 sources, 1.15, 1.16 cfengine-2.1.22-autotools.patch, 1.1, NONE cfengine-2.1.22-os_detection.patch, 1.1, NONE cfengine-2.2.1-glibc-open.patch, 1.1, NONE cfengine-2.2.1-hostrange.patch, 1.1, NONE cfengine-selinux.patch, 1.1, NONE
- Next message: rpms/kdelibs3/devel .cvsignore, 1.2, 1.3 kde.csh, 1.1, 1.2 kde.sh, 1.1, 1.2 kdelibs-3.5.6-utempter.patch, 1.1, 1.2 kdelibs3.spec, 1.1, 1.2 sources, 1.2, 1.3
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: linville
Update of /cvs/pkgs/rpms/kernel/devel
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv29286
Modified Files:
kernel.spec linux-2.6-wireless-pending.patch
Added Files:
linux-2.6-ath5k-use-soft-wep.patch
Log Message:
Some wireless bits headed for 2.6.25 ; Make ath5k use software WEP
linux-2.6-ath5k-use-soft-wep.patch:
--- NEW FILE linux-2.6-ath5k-use-soft-wep.patch ---
diff -up linux-2.6.23.noarch/drivers/net/wireless/ath5k/base.c.orig linux-2.6.23.noarch/drivers/net/wireless/ath5k/base.c
--- linux-2.6.23.noarch/drivers/net/wireless/ath5k/base.c.orig 2007-12-01 13:00:52.000000000 -0500
+++ linux-2.6.23.noarch/drivers/net/wireless/ath5k/base.c 2007-12-01 13:01:04.000000000 -0500
@@ -2830,7 +2830,6 @@ ath5k_set_key(struct ieee80211_hw *hw, e
switch(key->alg) {
case ALG_WEP:
- break;
case ALG_TKIP:
case ALG_CCMP:
return -EOPNOTSUPP;
Index: kernel.spec
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/kernel.spec,v
retrieving revision 1.270
retrieving revision 1.271
diff -u -r1.270 -r1.271
--- kernel.spec 30 Nov 2007 21:03:54 -0000 1.270
+++ kernel.spec 1 Dec 2007 18:44:27 -0000 1.271
@@ -614,6 +614,7 @@
Patch692: linux-2.6-zd1211rw-mac80211.patch
Patch693: linux-2.6-rtl8180.patch
Patch694: linux-2.6-b43-rev-d.patch
+Patch695: linux-2.6-ath5k-use-soft-wep.patch
Patch801: linux-2.6-wakeups.patch
Patch820: linux-2.6-compile-fixes.patch
Patch1101: linux-2.6-default-mmf_dump_elf_headers.patch
@@ -1110,7 +1111,11 @@
ApplyPatch linux-2.6-ath5k.patch
ApplyPatch linux-2.6-zd1211rw-mac80211.patch
ApplyPatch linux-2.6-rtl8180.patch
+
+# Add support for "rev 13" cores in b43
ApplyPatch linux-2.6-b43-rev-d.patch
+# Make ath5k use software WEP
+ApplyPatch linux-2.6-ath5k-use-soft-wep.patch
ApplyPatch linux-2.6-wakeups.patch
@@ -1716,6 +1721,10 @@
%kernel_variant_files -a /%{image_install_path}/xen*-%{KVERREL} -e /etc/ld.so.conf.d/kernelcap-%{KVERREL}.conf %{with_xen} xen
%changelog
+* Sat Dec 01 2007 John W. Linville <linville at redhat.com>
+- Some wireless bits headed for 2.6.25
+- Make ath5k use software WEP
+
* Fri Nov 30 2007 Kyle McMartin <kmcmartin at redhat.com>
- Oops! Local make-build-go-faster kernel.spec patch slipped in,
reverted.
linux-2.6-wireless-pending.patch:
View full diff with command:
/usr/bin/cvs -f diff -kk -u -N -r 1.14 -r 1.15 linux-2.6-wireless-pending.patch
Index: linux-2.6-wireless-pending.patch
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/linux-2.6-wireless-pending.patch,v
retrieving revision 1.14
retrieving revision 1.15
diff -u -r1.14 -r1.15
--- linux-2.6-wireless-pending.patch 30 Nov 2007 15:26:27 -0000 1.14
+++ linux-2.6-wireless-pending.patch 1 Dec 2007 18:44:27 -0000 1.15
@@ -1,1125 +1,1875 @@
-diff -up linux-2.6.23.noarch/drivers/ssb/b43_pci_bridge.c.orig linux-2.6.23.noarch/drivers/ssb/b43_pci_bridge.c
---- linux-2.6.23.noarch/drivers/ssb/b43_pci_bridge.c.orig 2007-11-30 09:03:19.000000000 -0500
-+++ linux-2.6.23.noarch/drivers/ssb/b43_pci_bridge.c 2007-11-30 10:03:38.000000000 -0500
-@@ -27,6 +27,7 @@ static const struct pci_device_id b43_pc
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
- { 0, },
+diff -up /dev/null linux-2.6.23.noarch/drivers/net/wireless/b43legacy/rfkill.h
+--- /dev/null 2007-12-01 09:44:05.571105098 -0500
++++ linux-2.6.23.noarch/drivers/net/wireless/b43legacy/rfkill.h 2007-12-01 12:46:43.000000000 -0500
+@@ -0,0 +1,59 @@
++#ifndef B43legacy_RFKILL_H_
++#define B43legacy_RFKILL_H_
++
++struct b43legacy_wldev;
++
++#ifdef CONFIG_B43LEGACY_RFKILL
++
++#include <linux/rfkill.h>
++#include <linux/workqueue.h>
++#include <linux/input-polldev.h>
++
++
++
++struct b43legacy_rfkill {
++ /* The RFKILL subsystem data structure */
++ struct rfkill *rfkill;
++ /* The poll device for the RFKILL input button */
++ struct input_polled_dev *poll_dev;
++ /* Did initialization succeed? Used for freeing. */
++ bool registered;
++ /* The unique name of this rfkill switch */
++ char name[sizeof("b43legacy-phy4294967295")];
++};
++
++/* The init function returns void, because we are not interested
++ * in failing the b43 init process when rfkill init failed. */
++void b43legacy_rfkill_init(struct b43legacy_wldev *dev);
++void b43legacy_rfkill_exit(struct b43legacy_wldev *dev);
++
++char * b43legacy_rfkill_led_name(struct b43legacy_wldev *dev);
++
++
++#else /* CONFIG_B43LEGACY_RFKILL */
++/* No RFKILL support. */
++
++struct b43legacy_rfkill {
++ /* empty */
++};
++
++static inline void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
++{
++}
++static inline void b43legacy_rfkill_free(struct b43legacy_wldev *dev)
++{
++}
++static inline void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
++{
++}
++static inline void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
++{
++}
++static inline char * b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
++{
++ return NULL;
++}
++
++#endif /* CONFIG_B43LEGACY_RFKILL */
++
++#endif /* B43legacy_RFKILL_H_ */
+diff -up linux-2.6.23.noarch/drivers/net/wireless/b43legacy/leds.h.orig linux-2.6.23.noarch/drivers/net/wireless/b43legacy/leds.h
+--- linux-2.6.23.noarch/drivers/net/wireless/b43legacy/leds.h.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/drivers/net/wireless/b43legacy/leds.h 2007-12-01 12:46:43.000000000 -0500
+@@ -1,30 +1,33 @@
+ #ifndef B43legacy_LEDS_H_
+ #define B43legacy_LEDS_H_
+
++struct b43legacy_wldev;
++
++#ifdef CONFIG_B43LEGACY_LEDS
++
+ #include <linux/types.h>
+-#include <linux/timer.h>
++#include <linux/leds.h>
+
+
++#define B43legacy_LED_MAX_NAME_LEN 31
++
+ struct b43legacy_led {
+- u8 behaviour;
+- bool activelow;
+- /* Index in the "leds" array in b43legacy_wldev */
+- u8 index;
+ struct b43legacy_wldev *dev;
+- struct timer_list blink_timer;
+- unsigned long blink_interval;
++ /* The LED class device */
++ struct led_classdev led_dev;
++ /* The index number of the LED. */
++ u8 index;
++ /* If activelow is true, the LED is ON if the
++ * bit is switched off. */
++ bool activelow;
++ /* The unique name string for this LED device. */
++ char name[B43legacy_LED_MAX_NAME_LEN + 1];
};
- MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
-diff -up linux-2.6.23.noarch/drivers/ssb/pci.c.orig linux-2.6.23.noarch/drivers/ssb/pci.c
---- linux-2.6.23.noarch/drivers/ssb/pci.c.orig 2007-11-30 09:03:19.000000000 -0500
-+++ linux-2.6.23.noarch/drivers/ssb/pci.c 2007-11-30 10:03:38.000000000 -0500
-@@ -212,29 +212,29 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
- return t[crc ^ data];
+
+-/* Delay between state changes when blinking in jiffies */
+-#define B43legacy_LEDBLINK_SLOW (HZ / 1)
+-#define B43legacy_LEDBLINK_MEDIUM (HZ / 4)
+-#define B43legacy_LEDBLINK_FAST (HZ / 8)
+-
+-#define B43legacy_LED_XFER_THRES (HZ / 100)
+-
+ #define B43legacy_LED_BEHAVIOUR 0x7F
+ #define B43legacy_LED_ACTIVELOW 0x80
+-enum { /* LED behaviour values */
++/* LED behaviour values */
++enum b43legacy_led_behaviour {
+ B43legacy_LED_OFF,
+ B43legacy_LED_ON,
+ B43legacy_LED_ACTIVITY,
+@@ -37,20 +40,24 @@ enum { /* LED behaviour values */
+ B43legacy_LED_WEIRD,
+ B43legacy_LED_ASSOC,
+ B43legacy_LED_INACTIVE,
+-
+- /* Behaviour values for testing.
+- * With these values it is easier to figure out
+- * the real behaviour of leds, in case the SPROM
+- * is missing information.
+- */
+- B43legacy_LED_TEST_BLINKSLOW,
+- B43legacy_LED_TEST_BLINKMEDIUM,
+- B43legacy_LED_TEST_BLINKFAST,
+ };
+
+-int b43legacy_leds_init(struct b43legacy_wldev *dev);
++void b43legacy_leds_init(struct b43legacy_wldev *dev);
+ void b43legacy_leds_exit(struct b43legacy_wldev *dev);
+-void b43legacy_leds_update(struct b43legacy_wldev *dev, int activity);
+-void b43legacy_leds_switch_all(struct b43legacy_wldev *dev, int on);
++
++#else /* CONFIG_B43EGACY_LEDS */
++/* LED support disabled */
++
++struct b43legacy_led {
++ /* empty */
++};
++
++static inline void b43legacy_leds_init(struct b43legacy_wldev *dev)
++{
++}
++static inline void b43legacy_leds_exit(struct b43legacy_wldev *dev)
++{
++}
++#endif /* CONFIG_B43LEGACY_LEDS */
+
+ #endif /* B43legacy_LEDS_H_ */
+diff -up linux-2.6.23.noarch/drivers/net/wireless/b43legacy/main.h.orig linux-2.6.23.noarch/drivers/net/wireless/b43legacy/main.h
+--- linux-2.6.23.noarch/drivers/net/wireless/b43legacy/main.h.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/drivers/net/wireless/b43legacy/main.h 2007-12-01 12:46:43.000000000 -0500
+@@ -3,7 +3,7 @@
+ Broadcom B43legacy wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer at gmx.de>,
+- Copyright (c) 2005 Stefano Brivio <st3 at riseup.net>
++ Copyright (c) 2005 Stefano Brivio <stefano.brivio at polimi.it>
+ Copyright (c) 2005, 2006 Michael Buesch <mb at bu3sch.de>
+ Copyright (c) 2005 Danny van Dyk <kugelfang at gentoo.org>
+ Copyright (c) 2005 Andreas Jaggi <andreas.jaggi at waterwave.ch>
+diff -up linux-2.6.23.noarch/drivers/net/wireless/b43legacy/phy.c.orig linux-2.6.23.noarch/drivers/net/wireless/b43legacy/phy.c
+--- linux-2.6.23.noarch/drivers/net/wireless/b43legacy/phy.c.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/drivers/net/wireless/b43legacy/phy.c 2007-12-01 12:46:43.000000000 -0500
+@@ -3,7 +3,7 @@
+ Broadcom B43legacy wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer at gmx.de>,
+- Stefano Brivio <st3 at riseup.net>
++ Stefano Brivio <stefano.brivio at polimi.it>
+ Michael Buesch <mbuesch at freenet.de>
+ Danny van Dyk <kugelfang at gentoo.org>
+ Andreas Jaggi <andreas.jaggi at waterwave.ch>
[...88847 lines suppressed...]
++ * @ampdu_factor: Maximum A-MPDU length factor
++ * @ampdu_density: Minimum A-MPDU spacing
++ * @supp_mcs_set: Supported MCS set as described in 802.11n spec
++ */
++struct ieee80211_ht_info {
++ u8 ht_supported;
++ u16 cap; /* use IEEE80211_HT_CAP_ */
++ u8 ampdu_factor;
++ u8 ampdu_density;
++ u8 supp_mcs_set[16];
++};
++
++/**
++ * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
++ *
++ * This structure describes most essential parameters needed
++ * to describe 802.11n HT characteristics in a BSS
++ *
++ * @primary_channel: channel number of primery channel
++ * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
++ * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection)
++ */
++struct ieee80211_ht_bss_info {
++ u8 primary_channel;
++ u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */
++ u8 bss_op_mode; /* use IEEE80211_HT_IE_ */
++};
++
++/**
+ * struct ieee80211_hw_mode - PHY mode definition
+ *
+ * This structure describes the capabilities supported by the device
+ * in a single PHY mode.
+ *
++ * @list: internal
++ * @channels: pointer to array of supported channels
++ * @rates: pointer to array of supported bitrates
+ * @mode: the PHY mode for this definition
+ * @num_channels: number of supported channels
+- * @channels: pointer to array of supported channels
+ * @num_rates: number of supported bitrates
+- * @rates: pointer to array of supported bitrates
+- * @list: internal
++ * @ht_info: PHY's 802.11n HT abilities for this mode
+ */
+ struct ieee80211_hw_mode {
+ struct list_head list;
+@@ -158,6 +195,7 @@ struct ieee80211_hw_mode {
+ enum ieee80211_phymode mode;
+ int num_channels;
+ int num_rates;
++ struct ieee80211_ht_info ht_info;
+ };
+
+ /**
+@@ -406,11 +444,12 @@ struct ieee80211_tx_status {
+ *
+ * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time
+ * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
+- *
++ * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported)
+ */
+ enum ieee80211_conf_flags {
+- IEEE80211_CONF_SHORT_SLOT_TIME = 1<<0,
+- IEEE80211_CONF_RADIOTAP = 1<<1,
++ IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0),
++ IEEE80211_CONF_RADIOTAP = (1<<1),
++ IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2),
+ };
+
+ /**
+@@ -434,6 +473,8 @@ enum ieee80211_conf_flags {
+ * @antenna_sel_tx: transmit antenna selection, 0: default/diversity,
+ * 1/2: antenna 0/1
+ * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx
++ * @ht_conf: describes current self configuration of 802.11n HT capabilies
++ * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
+ */
+ struct ieee80211_conf {
+ int channel; /* IEEE 802.11 channel number */
+@@ -452,6 +493,9 @@ struct ieee80211_conf {
+ u8 antenna_max;
+ u8 antenna_sel_tx;
+ u8 antenna_sel_rx;
++
++ struct ieee80211_ht_info ht_conf;
++ struct ieee80211_ht_bss_info ht_bss_conf;
+ };
+
+ /**
+@@ -997,6 +1041,8 @@ enum ieee80211_erp_change_flags {
+ * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
+ * This is needed only for IBSS mode and the result of this function is
+ * used to determine whether to reply to Probe Requests.
++ *
++ * @conf_ht: Configures low level driver with 802.11n HT data. Must be atomic.
+ */
+ struct ieee80211_ops {
+ int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
+@@ -1042,6 +1088,7 @@ struct ieee80211_ops {
+ struct sk_buff *skb,
+ struct ieee80211_tx_control *control);
+ int (*tx_last_beacon)(struct ieee80211_hw *hw);
++ int (*conf_ht)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+ };
+
+ /**
+@@ -1406,4 +1453,19 @@ void ieee80211_wake_queues(struct ieee80
*/
void ieee80211_scan_completed(struct ieee80211_hw *hw);
@@ -46869,10 +49059,9 @@
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
-+ * Must be called under RTNL.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
-+ * @iterator: the iterator function to call
++ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -46882,8 +49071,8 @@
+
#endif /* MAC80211_H */
diff -up linux-2.6.23.noarch/include/linux/ieee80211.h.orig linux-2.6.23.noarch/include/linux/ieee80211.h
---- linux-2.6.23.noarch/include/linux/ieee80211.h.orig 2007-11-30 09:03:26.000000000 -0500
-+++ linux-2.6.23.noarch/include/linux/ieee80211.h 2007-11-30 10:03:39.000000000 -0500
+--- linux-2.6.23.noarch/include/linux/ieee80211.h.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/include/linux/ieee80211.h 2007-12-01 12:46:43.000000000 -0500
@@ -54,6 +54,8 @@
#define IEEE80211_STYPE_ACTION 0x00D0
@@ -47101,8 +49290,8 @@
#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00
#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01
diff -up linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h.orig linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h
---- linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h.orig 2007-11-30 09:03:26.000000000 -0500
-+++ linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h 2007-11-30 10:03:39.000000000 -0500
+--- linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/include/linux/ssb/ssb_regs.h 2007-12-01 12:46:43.000000000 -0500
@@ -147,6 +147,10 @@
#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */
#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */
@@ -47203,8 +49392,8 @@
enum {
SSB_SPROM1CCODE_WORLD = 0,
diff -up linux-2.6.23.noarch/include/linux/ssb/ssb.h.orig linux-2.6.23.noarch/include/linux/ssb/ssb.h
---- linux-2.6.23.noarch/include/linux/ssb/ssb.h.orig 2007-11-30 09:03:26.000000000 -0500
-+++ linux-2.6.23.noarch/include/linux/ssb/ssb.h 2007-11-30 10:03:39.000000000 -0500
+--- linux-2.6.23.noarch/include/linux/ssb/ssb.h.orig 2007-12-01 12:46:26.000000000 -0500
++++ linux-2.6.23.noarch/include/linux/ssb/ssb.h 2007-12-01 12:46:43.000000000 -0500
@@ -15,22 +15,14 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
@@ -47306,43 +49495,3 @@
u8 chip_package;
/* List of devices (cores) on the backplane. */
-diff -up linux-2.6.23.noarch/MAINTAINERS.orig linux-2.6.23.noarch/MAINTAINERS
---- linux-2.6.23.noarch/MAINTAINERS.orig 2007-11-30 09:03:30.000000000 -0500
-+++ linux-2.6.23.noarch/MAINTAINERS 2007-11-30 10:03:39.000000000 -0500
-@@ -2027,10 +2027,12 @@ W: http://sourceforge.net/projects/e1000
- S: Supported
-
- INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
--P: Yi Zhu
-+P: Zhu Yi
- M: yi.zhu at intel.com
- P: James Ketrenos
- M: jketreno at linux.intel.com
-+P: Reinette Chatre
-+M: reinette.chatre at intel.com
- L: linux-wireless at vger.kernel.org
- L: ipw2100-devel at lists.sourceforge.net
- L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
-@@ -2038,10 +2040,12 @@ W: http://ipw2100.sourceforge.net
- S: Supported
-
- INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
--P: Yi Zhu
-+P: Zhu Yi
- M: yi.zhu at intel.com
- P: James Ketrenos
- M: jketreno at linux.intel.com
-+P: Reinette Chatre
-+M: reinette.chatre at intel.com
- L: linux-wireless at vger.kernel.org
- L: ipw2100-devel at lists.sourceforge.net
- L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
-@@ -2051,6 +2055,8 @@ S: Supported
- INTEL WIRELESS WIFI LINK (iwlwifi)
- P: Zhu Yi
- M: yi.zhu at intel.com
-+P: Reinette Chatre
-+M: reinette.chatre at intel.com
- L: linux-wireless at vger.kernel.org
- L: ipw3945-devel at lists.sourceforge.net
- W: http://intellinuxwireless.org
- Previous message: rpms/cfengine/F-8 .cvsignore, 1.15, 1.16 cfengine.spec, 1.28, 1.29 sources, 1.15, 1.16 cfengine-2.1.22-autotools.patch, 1.1, NONE cfengine-2.1.22-os_detection.patch, 1.1, NONE cfengine-2.2.1-glibc-open.patch, 1.1, NONE cfengine-2.2.1-hostrange.patch, 1.1, NONE cfengine-selinux.patch, 1.1, NONE
- Next message: rpms/kdelibs3/devel .cvsignore, 1.2, 1.3 kde.csh, 1.1, 1.2 kde.sh, 1.1, 1.2 kdelibs-3.5.6-utempter.patch, 1.1, 1.2 kdelibs3.spec, 1.1, 1.2 sources, 1.2, 1.3
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the scm-commits
mailing list