rpms/kernel/devel kernel.spec, 1.1936, 1.1937 linux-2.6-v4l-dvb-experimental.patch, 1.8, 1.9 linux-2.6-v4l-dvb-fixes.patch, 1.13, 1.14 linux-2.6-v4l-dvb-update.patch, 1.14, 1.15 linux-2.6-revert-dvb-net-kabi-change.patch, 1.1, NONE v4l-dvb-fix-cx25840-firmware-loading.patch, 1.1, NONE
Chuck Ebbert
cebbert at fedoraproject.org
Wed Feb 24 23:14:13 UTC 2010
- Previous message: rpms/kernel/devel patch-2.6.33-rc8-git6.bz2.sign, 1.1, NONE patch-2.6.33-rc8.bz2.sign, 1.1, NONE
- Next message: rpms/kernel/devel config-generic, 1.354, 1.355 config-ia64-generic, 1.27, 1.28 config-powerpc-generic, 1.54, 1.55 config-powerpc32-generic, 1.37, 1.38 config-powerpc64, 1.36, 1.37 config-rhel-generic, 1.17, 1.18 config-s390x, 1.21, 1.22 config-sparc64-generic, 1.31, 1.32 config-x86-generic, 1.93, 1.94 config-x86_64-generic, 1.99, 1.100 kernel.spec, 1.1937, 1.1938
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: cebbert
Update of /cvs/pkgs/rpms/kernel/devel
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv7813
Modified Files:
kernel.spec linux-2.6-v4l-dvb-experimental.patch
linux-2.6-v4l-dvb-fixes.patch linux-2.6-v4l-dvb-update.patch
Removed Files:
linux-2.6-revert-dvb-net-kabi-change.patch
v4l-dvb-fix-cx25840-firmware-loading.patch
Log Message:
Drop/clear obsolete V4L patches, use ApplyOptionalPatch
Index: kernel.spec
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/kernel.spec,v
retrieving revision 1.1936
retrieving revision 1.1937
diff -u -p -r1.1936 -r1.1937
--- kernel.spec 24 Feb 2010 23:02:23 -0000 1.1936
+++ kernel.spec 24 Feb 2010 23:14:07 -0000 1.1937
@@ -704,7 +704,6 @@ Patch2802: linux-2.6-silence-acpi-blackl
Patch2899: linux-2.6-v4l-dvb-fixes.patch
Patch2900: linux-2.6-v4l-dvb-update.patch
Patch2901: linux-2.6-v4l-dvb-experimental.patch
-Patch2903: linux-2.6-revert-dvb-net-kabi-change.patch
Patch2904: linux-2.6-v4l-dvb-rebase-gspca-to-latest.patch
# fs fixes
@@ -1317,10 +1316,11 @@ ApplyOptionalPatch drm-intel-next.patch
ApplyPatch linux-2.6-silence-acpi-blacklist.patch
# V4L/DVB updates/fixes/experimental drivers
-#ApplyPatch linux-2.6-v4l-dvb-fixes.patch
-#ApplyPatch linux-2.6-v4l-dvb-update.patch
-#ApplyPatch linux-2.6-v4l-dvb-experimental.patch
-#ApplyPatch linux-2.6-revert-dvb-net-kabi-change.patch
+# apply if non-empty
+ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
+
ApplyPatch linux-2.6-v4l-dvb-rebase-gspca-to-latest.patch
# Patches headed upstream
@@ -1996,6 +1996,9 @@ fi
%changelog
* Wed Feb 24 2010 Chuck Ebbert <cebbert at redhat.com>
+- Drop/clear obsolete V4L patches, use ApplyOptionalPatch
+
+* Wed Feb 24 2010 Chuck Ebbert <cebbert at redhat.com>
- Linux 2.6.33
* Wed Feb 24 2010 Dave Jones <davej at redhat.com>
linux-2.6-v4l-dvb-experimental.patch:
0 files changed
View full diff with command:
/usr/bin/cvs -n -f diff -kk -u -p -N -r 1.8 -r 1.9 linux-2.6-v4l-dvb-experimental.patchIndex: linux-2.6-v4l-dvb-experimental.patch
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/linux-2.6-v4l-dvb-experimental.patch,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -p -r1.8 -r1.9
--- linux-2.6-v4l-dvb-experimental.patch 30 Mar 2009 12:11:44 -0000 1.8
+++ linux-2.6-v4l-dvb-experimental.patch 24 Feb 2010 23:14:07 -0000 1.9
@@ -1,14750 +0,0 @@
-Hans Verkuil (2):
- V4L/DVB (10982): cx231xx: fix compile warning
- V4L/DVB (10989): cx25840: cx23885 detection was broken
-
-Mauro Carvalho Chehab (12):
- V4L/DVB (10953): cx25840: Fix CodingStyle errors introduced by the last patch
- V4L/DVB (10955): cx231xx: CodingStyle automatic fixes with Lindent
- V4L/DVB (10956): cx231xx: First series of manual CodingStyle fixes
- V4L/DVB (10957a): cx231xx: Fix compilation breakage
- V4L/DVB (11130): cx231xx: fix an inverted logic at vidioc_streamoff
- V4L/DVB (11131): cx231xx: avoid trying to access unfilled dev struct
- V4L/DVB (11132): cx231xx: usb probe cleanups
- V4L/DVB (11133): cx231xx: don't print pcb config debug messages by default
- V4L/DVB (11134): cx231xx: dmesg cleanup
- V4L/DVB (11135): cx231xx: use usb_make_path() for bus_info
- V4L/DVB (11250): cx231xx: Fix Kconfig help items
- Merge branch 'next' of ../pending into Fedora
-
-Sri Deevi (7):
- V4L/DVB (10952): cx25840: prepare it to be used by cx231xx module
- V4L/DVB (10954): Add cx231xx USB driver
- V4L/DVB (10957): cx231xx: Fix CodingStyle
- V4L/DVB (10958): cx231xx: some additional CodingStyle and minor fixes
- V4L/DVB (11038): Fix the issue with audio module & correction of Names
- V4L/DVB (11128): cx231xx: convert the calls to subdev format
- V4L/DVB (11129): cx231xx: Use generic names for each device block
-
-Uri Shkolnik (2):
- V4L/DVB (11239): sdio: add cards ids for sms (Siano Mobile Silicon) MDTV receivers
- V4L/DVB (11240): siano: add high level SDIO interface driver for SMS based cards
-
-diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
-new file mode 100644
-index 0000000..31ba8c5
---- /dev/null
-+++ b/drivers/media/dvb/siano/smssdio.c
-@@ -0,0 +1,356 @@
-+/*
-+ * smssdio.c - Siano 1xxx SDIO interface driver
-+ *
-+ * Copyright 2008 Pierre Ossman
-+ *
-+ * Based on code by Siano Mobile Silicon, Inc.,
-+ * Copyright (C) 2006-2008, Uri Shkolnik
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ *
-+ * This hardware is a bit odd in that all transfers should be done
-+ * to/from the SMSSDIO_DATA register, yet the "increase address" bit
-+ * always needs to be set.
-+ *
-+ * Also, buffers from the card are always aligned to 128 byte
-+ * boundaries.
-+ */
-+
-+/*
-+ * General cleanup notes:
-+ *
-+ * - only typedefs should be name *_t
-+ *
-+ * - use ERR_PTR and friends for smscore_register_device()
-+ *
-+ * - smscore_getbuffer should zero fields
-+ *
-+ * Fix stop command
-+ */
-+
-+#include <linux/moduleparam.h>
-+#include <linux/firmware.h>
-+#include <linux/delay.h>
-+#include <linux/mmc/card.h>
-+#include <linux/mmc/sdio_func.h>
-+#include <linux/mmc/sdio_ids.h>
-+
-+#include "smscoreapi.h"
-+#include "sms-cards.h"
-+
-+/* Registers */
-+
-+#define SMSSDIO_DATA 0x00
-+#define SMSSDIO_INT 0x04
-+
-+static const struct sdio_device_id smssdio_ids[] = {
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
-+ .driver_data = SMS1XXX_BOARD_SIANO_STELLAR},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
-+ .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-+ { /* end: all zeroes */ },
-+};
-+
-+MODULE_DEVICE_TABLE(sdio, smssdio_ids);
-+
-+struct smssdio_device {
-+ struct sdio_func *func;
-+
-+ struct smscore_device_t *coredev;
-+
-+ struct smscore_buffer_t *split_cb;
-+};
-+
-+/*******************************************************************/
-+/* Siano core callbacks */
-+/*******************************************************************/
-+
-+static int smssdio_sendrequest(void *context, void *buffer, size_t size)
-+{
-+ int ret;
-+ struct smssdio_device *smsdev;
-+
-+ smsdev = context;
-+
-+ sdio_claim_host(smsdev->func);
-+
-+ while (size >= smsdev->func->cur_blksize) {
-+ ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
-+ if (ret)
-+ goto out;
-+
-+ buffer += smsdev->func->cur_blksize;
-+ size -= smsdev->func->cur_blksize;
-+ }
-+
-+ if (size) {
-+ ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
-+ buffer, size);
-+ if (ret)
-+ goto out;
-+ }
-+
-+out:
-+ sdio_release_host(smsdev->func);
-+
-+ return ret;
-+}
-+
-+/*******************************************************************/
-+/* SDIO callbacks */
-+/*******************************************************************/
-+
-+static void smssdio_interrupt(struct sdio_func *func)
-+{
-+ int ret, isr;
-+
-+ struct smssdio_device *smsdev;
-+ struct smscore_buffer_t *cb;
-+ struct SmsMsgHdr_ST *hdr;
-+ size_t size;
-+
-+ smsdev = sdio_get_drvdata(func);
-+
-+ /*
-+ * The interrupt register has no defined meaning. It is just
-+ * a way of turning of the level triggered interrupt.
-+ */
-+ isr = sdio_readb(func, SMSSDIO_INT, &ret);
-+ if (ret) {
-+ dev_err(&smsdev->func->dev,
-+ "Unable to read interrupt register!\n");
-+ return;
-+ }
-+
-+ if (smsdev->split_cb == NULL) {
-+ cb = smscore_getbuffer(smsdev->coredev);
-+ if (!cb) {
-+ dev_err(&smsdev->func->dev,
-+ "Unable to allocate data buffer!\n");
-+ return;
-+ }
-+
-+ ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
-+ if (ret) {
-+ dev_err(&smsdev->func->dev,
-+ "Error %d reading initial block!\n", ret);
-+ return;
-+ }
-+
-+ hdr = cb->p;
-+
-+ if (hdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG) {
-+ smsdev->split_cb = cb;
-+ return;
[...14359 lines suppressed...]
-+
-+ pll /= pll_post;
-+ v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
-+ pll / 1000000, pll % 1000000);
-+ v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
-+ pll / 8000000, (pll / 8) % 1000000);
-+
-+ fin = ((u64)src_decimation * pll) >> 12;
-+ v4l_dbg(1, cx25840_debug, client,
-+ "ADC Sampling freq = %d.%06d MHz\n",
-+ fin / 1000000, fin % 1000000);
-+
-+ fsc = (((u64)sc) * pll) >> 24L;
-+ v4l_dbg(1, cx25840_debug, client,
-+ "Chroma sub-carrier freq = %d.%06d MHz\n",
-+ fsc / 1000000, fsc % 1000000);
-+
-+ v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
-+ "vblank %i, vactive %i, vblank656 %i, src_dec %i, "
-+ "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
-+ "sc 0x%06x\n",
-+ hblank, hactive, vblank, vactive, vblank656,
-+ src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
-+ }
- }
-
- /* Sets horizontal blanking delay and active lines */
-@@ -596,7 +669,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
- * configuration in reg (for the cx23885) so we have no
- * need to attempt to flip bits for earlier av decoders.
- */
-- if (!state->is_cx23885) {
-+ if (!state->is_cx23885 && !state->is_cx231xx) {
- switch (aud_input) {
- case CX25840_AUDIO_SERIAL:
- /* do nothing, use serial audio input */
-@@ -619,7 +692,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
- /* Set INPUT_MODE to Composite (0) or S-Video (1) */
- cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
-
-- if (!state->is_cx23885) {
-+ if (!state->is_cx23885 && !state->is_cx231xx) {
- /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
- cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
- /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */
-@@ -659,6 +732,19 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp
- */
- cx25840_write(client, 0x918, 0xa0);
- cx25840_write(client, 0x919, 0x01);
-+ } else if (state->is_cx231xx) {
-+ /* Audio channel 1 src : Parallel 1 */
-+ cx25840_write(client, 0x124, 0x03);
-+
-+ /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */
-+ cx25840_write(client, 0x914, 0xa0);
-+
-+ /* I2S_OUT_CTL:
-+ * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1
-+ * I2S_OUT_MASTER_MODE = Master
-+ */
-+ cx25840_write(client, 0x918, 0xa0);
-+ cx25840_write(client, 0x919, 0x01);
- }
-
- return 0;
-@@ -1118,6 +1204,8 @@ static int cx25840_init(struct v4l2_subdev *sd, u32 val)
- cx25836_initialize(client);
- else if (state->is_cx23885)
- cx23885_initialize(client);
-+ else if (state->is_cx231xx)
-+ cx231xx_initialize(client);
- else
- cx25840_initialize(client);
- }
-@@ -1159,7 +1247,7 @@ static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
- v4l_dbg(1, cx25840_debug, client, "%s output\n",
- enable ? "enable" : "disable");
- if (enable) {
-- if (state->is_cx23885) {
-+ if (state->is_cx23885 || state->is_cx231xx) {
- u8 v = (cx25840_read(client, 0x421) | 0x0b);
- cx25840_write(client, 0x421, v);
- } else {
-@@ -1169,7 +1257,7 @@ static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
- state->is_cx25836 ? 0x04 : 0x07);
- }
- } else {
-- if (state->is_cx23885) {
-+ if (state->is_cx23885 || state->is_cx231xx) {
- u8 v = cx25840_read(client, 0x421) & ~(0x0b);
- cx25840_write(client, 0x421, v);
- } else {
-@@ -1350,6 +1438,8 @@ static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
- cx25836_initialize(client);
- else if (state->is_cx23885)
- cx23885_initialize(client);
-+ else if (state->is_cx231xx)
-+ cx231xx_initialize(client);
- else
- cx25840_initialize(client);
- return 0;
-@@ -1449,6 +1539,8 @@ static int cx25840_probe(struct i2c_client *client,
- id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
- } else if (device_id == 0x1313) {
- id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
-+ } else if ((device_id & 0xfff0) == 0x5A30) {
-+ id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
- }
- else {
- v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");
-@@ -1471,6 +1563,7 @@ static int cx25840_probe(struct i2c_client *client,
- state->c = client;
- state->is_cx25836 = ((device_id & 0xff00) == 0x8300);
- state->is_cx23885 = (device_id == 0x0000) || (device_id == 0x1313);
-+ state->is_cx231xx = (device_id == 0x5a3e);
- state->vid_input = CX25840_COMPOSITE7;
- state->aud_input = CX25840_AUDIO8;
- state->audclk_freq = 48000;
-diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
-index 9ad0eb8..814b565 100644
---- a/drivers/media/video/cx25840/cx25840-core.h
-+++ b/drivers/media/video/cx25840/cx25840-core.h
-@@ -50,6 +50,7 @@ struct cx25840_state {
- u32 rev;
- int is_cx25836;
- int is_cx23885;
-+ int is_cx231xx;
- int is_initialized;
- wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
- struct work_struct fw_work; /* work entry for fw load */
-diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
-index 0b2dceb..0df53b0 100644
---- a/drivers/media/video/cx25840/cx25840-firmware.c
-+++ b/drivers/media/video/cx25840/cx25840-firmware.c
-@@ -25,6 +25,7 @@
-
- #define FWFILE "v4l-cx25840.fw"
- #define FWFILE_CX23885 "v4l-cx23885-avcore-01.fw"
-+#define FWFILE_CX231XX "v4l-cx231xx-avcore-01.fw"
-
- /*
- * Mike Isely <isely at pobox.com> - The FWSEND parameter controls the
-@@ -96,9 +97,17 @@ int cx25840_loadfw(struct i2c_client *client)
- u8 buffer[FWSEND];
- const u8 *ptr;
- int size, retval;
-+ int MAX_BUF_SIZE = FWSEND;
-
- if (state->is_cx23885)
- firmware = FWFILE_CX23885;
-+ else if (state->is_cx231xx)
-+ firmware = FWFILE_CX231XX;
-+
-+ if ((state->is_cx231xx) && MAX_BUF_SIZE > 16) {
-+ v4l_err(client, " Firmware download size changed to 16 bytes max length\n");
-+ MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */
-+ }
-
- if (request_firmware(&fw, firmware, FWDEV(client)) != 0) {
- v4l_err(client, "unable to open firmware %s\n", firmware);
-@@ -113,7 +122,7 @@ int cx25840_loadfw(struct i2c_client *client)
- size = fw->size;
- ptr = fw->data;
- while (size > 0) {
-- int len = min(FWSEND - 2, size);
-+ int len = min(MAX_BUF_SIZE - 2, size);
-
- memcpy(buffer + 2, ptr, len);
-
-diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
-index f27604a..f9d48c9 100644
---- a/include/linux/i2c-id.h
-+++ b/include/linux/i2c-id.h
-@@ -88,6 +88,7 @@
- #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
- #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
- #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */
-+#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */
- #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */
-
- /* --- SGI adapters */
-diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
-index ea1bf5b..3d7533d 100644
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -24,6 +24,14 @@
- */
-
- #define SDIO_VENDOR_ID_MARVELL 0x02df
-+#define SDIO_VENDOR_ID_SIANO 0x039a
-+
- #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
-+#define SDIO_DEVICE_ID_SIANO_STELLAR 0x5347
-+#define SDIO_DEVICE_ID_SIANO_NOVA_A0 0x1100
-+#define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201
-+#define SDIO_DEVICE_ID_SIANO_NICE 0x0202
-+#define SDIO_DEVICE_ID_SIANO_VEGA_A0 0x0300
-+#define SDIO_DEVICE_ID_SIANO_VENICE 0x0301
-
- #endif
linux-2.6-v4l-dvb-fixes.patch:
0 files changed
View full diff with command:
/usr/bin/cvs -n -f diff -kk -u -p -N -r 1.13 -r 1.14 linux-2.6-v4l-dvb-fixes.patchIndex: linux-2.6-v4l-dvb-fixes.patch
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/linux-2.6-v4l-dvb-fixes.patch,v
retrieving revision 1.13
retrieving revision 1.14
diff -u -p -r1.13 -r1.14
--- linux-2.6-v4l-dvb-fixes.patch 10 Jul 2009 01:58:13 -0000 1.13
+++ linux-2.6-v4l-dvb-fixes.patch 24 Feb 2010 23:14:07 -0000 1.14
@@ -1,113215 +0,0 @@
-Abylay Ospan (5):
- V4L/DVB (10796): Add init code for NetUP Dual DVB-S2 CI card
- V4L/DVB (10797): Add EEPROM code for NetUP Dual DVB-S2 CI card.
- V4L/DVB (10798): Add CIMax(R) SP2 Common Interface code for NetUP Dual DVB-S2 CI card
- V4L/DVB (11056): Bug fix in NetUP: restore high address lines in CI
- V4L/DVB (11057): Fix CiMax stability in Netup Dual DVB-S2 CI
-
-Adam Baker (2):
- V4L/DVB (10639): gspca - sq905: New subdriver.
- V4L/DVB (10829): Support alternate resolutions for sq905
-
-Alan Cox (2):
- V4L/DVB (11243): cx88: Missing failure checks
- V4L/DVB (11244): pluto2: silence spew of card hung up messages
-
-Alan McIvor (1):
- V4L/DVB (11124): Add support for ProVideo PV-183 to bttv
-
-Alexey Klimov (18):
- V4L/DVB (10316): v4l/dvb: use usb_make_path in usb-radio drivers
- V4L/DVB (10324): em28xx: Correct mailing list
- V4L/DVB (10335): gspca - all subdrivers: Fix CodingStyle in sd_mod_init function.
- V4L/DVB (10336): gspca - all subdrivers: Return ret instead of -1 in sd_mod_init.
- V4L/DVB (10455): radio-mr800: codingstyle cleanups
- V4L/DVB (10456): radio-mr800: place dev_err instead of dev_warn
- V4L/DVB (10457): radio-mr800: add more dev_err messages in probe
- V4L/DVB (10458): radio-mr800: move radio start and stop in one function
- V4L/DVB (10459): radio-mr800: fix amradio_set_freq
- V4L/DVB (10460): radio-mr800: add stereo support
- V4L/DVB (10461): radio-mr800: add few lost mutex locks
- V4L/DVB (10462): radio-mr800: increase version and add comments
- V4L/DVB (10463): radio-mr800: fix checking of retval after usb_bulk_msg
- V4L/DVB (10464): radio-si470x: use usb_make_path in usb-radio drivers
- V4L/DVB (10465): dsbr100: Add few lost mutex locks.
- V4L/DVB (10522): em28xx-audio: replace printk with em28xx_errdev
- V4L/DVB (10946): radio-rtrack2: fix double mutex_unlock
- V4L/DVB (10961): radio-terratec: remove linux/delay.h which hadn't been used.
-
-Andy Walls (44):
- V4L/DVB (10274): cx18: Fix a PLL divisor update for the I2S master clock
- V4L/DVB (10275): cx18: Additional debug to display outgoing mailbox parameters
- V4L/DVB (10276): cx18, cx2341x, ivtv: Add AC-3 audio encoding control to cx18
- V4L/DVB (10277): cx18, cx2341x: Fix bugs in cx18 AC3 control and comply with V4L2 spec
- V4L/DVB (10278): cx18: Fix bad audio in first analog capture.
- V4L/DVB (10279): cx18: Print driver version number when logging status
- V4L/DVB (10280): cx18: Rename structure members: dev to pci_dev and v4l2dev to video_dev
- V4L/DVB (10281): cx18: Conversion to new V4L2 framework: use v4l2_device object
- V4L/DVB (10283): cx18: Call request_module() with proper argument types.
- V4L/DVB (10284): cx18: Add initial entry for a Leadtek DVR3100 H hybrid card
- V4L/DVB (10433): cx18: Defer A/V core initialization until a valid cx18_av_cmd arrives
- V4L/DVB (10434): cx18: Smarter verification of CX18_AUDIO_ENABLE register writes
- V4L/DVB (10435): cx18: Normalize APU after second APU firmware load
- V4L/DVB (10436): cx18: Fix coding style of a switch statement per checkpatch.pl
- V4L/DVB (10437): cx18: Remove an unused spinlock
- V4L/DVB (10439): cx18: Clean-up and enable sliced VBI handling
- V4L/DVB (10440): cx18: Fix presentation timestamp (PTS) for VBI buffers
- V4L/DVB (10441): cx18: Fix VBI ioctl() handling and Raw/Sliced VBI state management
- V4L/DVB (10442): cx18: Fixes for enforcing when Encoder Raw VBI params can be set
- V4L/DVB (10443): cx18: Use correct line counts per field in firmware API call
- V4L/DVB (10444): cx18: Fix sliced VBI PTS and fix artifacts in last raw line of field
- V4L/DVB (10445): cx18: Process Raw VBI on a whole frame basis; fix VBI buffer size
- V4L/DVB (10446): cx18: Finally get sliced VBI working - for 525 line 60 Hz systems at least
- V4L/DVB (10755): cx18: Convert the integrated A/V decoder core interface to a v4l2_subdev
- V4L/DVB (10756): cx18: Slim down instance handling, build names from v4l2_device.name
- V4L/DVB (10757): cx18, v4l2-chip-ident: Finish conversion of AV decoder core to v4l2_subdev
- V4L/DVB (10758): cx18: Convert I2C devices to v4l2_subdevices
- V4L/DVB (10759): cx18: Convert GPIO connected functions to act as v4l2_subdevices
- V4L/DVB (10760): cx18: Fix a memory leak of buffers used for sliced VBI insertion
- V4L/DVB (10761): cx18: Change log lines for internal subdevs and fix tveeprom reads
- V4L/DVB (10762): cx18: Get rid of unused variables related to video output
- V4L/DVB (10763): cx18: Increment version number due to significant changes for v4l2_subdevs
- V4L/DVB (10764): cx18: Disable AC3 controls as the firmware doesn't support AC3
- V4L/DVB (10850): cx18: Use strlcpy() instead of strncpy() for temp eeprom i2c_client setup
- V4L/DVB (10851): cx18: Fix a video scaling check problem introduced by sliced VBI changes
- V4L/DVB (10852): cx18: Include cx18-audio.h in cx18-audio.c to eliminate s-parse warning
- V4L/DVB (10853): cx18: Fix s-parse warnings and a logic error about extracting the VBI PTS
- V4L/DVB (10854): cx18: Correct comments about vertical and horizontal blanking timings
- V4L/DVB (10855): cx18: Fix VPS service register codes
- V4L/DVB (10856): cx18: Add interlock so sliced VBI insertion only happens for an MPEG PS
- V4L/DVB (11042): v4l2-api: Add definitions for V4L2_MPEG_STREAM_VBI_FMT_IVTV payloads
- V4L/DVB (11091): cx18, ivtv: Ensure endianess for linemasks in VBI embedded in MPEG stream
- V4L/DVB (11092): cx18: Optimize processing of VBI buffers from the capture unit
- V4L/DVB (11233): mxl5005s: Switch in mxl5005s_set_params should operate on correct values
-
-Antoine Jacquet (1):
- V4L/DVB (10263): zr364xx: add support for Aiptek DV T300
-
-Antonio Ospite (2):
- V4L/DVB (10344): gspca - ov534: Disable the Hercules webcams.
- V4L/DVB (10676): mt9m111: Call icl->reset() on mt9m111_reset().
-
-Antti Palosaari (4):
- V4L/DVB (10286): af9015: add new USB ID for KWorld DVB-T 395U
- V4L/DVB (10329): af9015: remove dual_mode module param
- V4L/DVB (11215): zl10353: add support for Intel CE6230 and Intel CE6231
- V4L/DVB (11216): Add driver for Intel CE6230 DVB-T USB2.0
-
-Arne Luehrs (1):
- V4L/DVB (10319): dib0700: enable IR receiver in Nova TD usb stick (52009)
-
-Artem Makhutov (1):
- V4L/DVB (11248): Remove debug output from stb6100_cfg.h
-
-Bruno Christo (1):
- V4L/DVB (10827): Add support for GeoVision GV-800(S)
-
-Daniel Glöckner (1):
- V4L/DVB (11242): allow v4l2 drivers to provide a get_unmapped_area handler
-
-Devin Heitmueller (36):
- V4L/DVB (10320): dib0700: fix i2c error message to make data type clear
- V4L/DVB (10321): dib0700: Report dib0700_i2c_enumeration failures
- V4L/DVB (11059): xc5000: fix bug for hybrid xc5000 devices with IF other than 5380
- V4L/DVB (11060): au8522: rename the au8522.c source file
- V4L/DVB (11061): au8522: move shared state and common functions into a separate header files
- V4L/DVB (11062): au8522: fix register read/write high bits
- V4L/DVB (11063): au8522: power down the digital demod when not in use
- V4L/DVB (11064): au8522: make use of hybrid framework so analog/digital demod can share state
- V4L/DVB (11065): au8522: add support for analog side of demodulator
- V4L/DVB (11066): au0828: add support for analog functionality in bridge
- V4L/DVB (11067): au0828: workaround a bug in the au0828 i2c handling
- V4L/DVB (11068): au0828: add analog profile for the HVR-850
- V4L/DVB (11069): au8522: add mutex protecting use of hybrid state
- V4L/DVB (11070): au0828: Rework the way the analog video binding occurs
- V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definition
- V4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC standards)
- V4L/DVB (11073): au0828: disable VBI code since it doesn't yet work
- V4L/DVB (11074): au0828: fix i2c enumeration bug
- V4L/DVB (11075): au0828: make register debug lines easier to read
- V4L/DVB (11076): au0828: make g_chip_ident call work properly
- V4L/DVB (11077): au0828: properly handle missing analog USB endpoint
- V4L/DVB (11078): au0828: properly handle non-existent analog inputs
- V4L/DVB (11079): au0828: fix panic on disconnect if analog initialization failed
- V4L/DVB (11080): au0828: Convert to use v4l2_device/subdev framework
- V4L/DVB (11081): au0828: make sure v4l2_device name is unique
- V4L/DVB (11082): au0828: remove memset calls in v4l2 routines.
- V4L/DVB (11083): au0828: remove some unneeded braces
- V4L/DVB (11084): au0828: add entry for undefined input type
- V4L/DVB (11085): au0828/au8522: Codingstyle fixes
- V4L/DVB (11086): au0828: rename macro for currently non-function VBI support
- V4L/DVB (11088): au0828: finish videodev/subdev conversion
- V4L/DVB (11089): au8522: finish conversion to v4l2_device/subdev
- V4L/DVB (11139): em28xx: add remote control definition for HVR-900 (both versions)
- V4L/DVB (11140): usbvision: fix oops on ARM platform when allocating transfer buffers
- V4L/DVB (11141): em28xx: fix oops on ARM platform when allocating transfer buffers
- V4L/DVB (11142): au0828: fix oops on ARM platform when allocating transfer buffers
-
-Douglas Kosovic (1):
- V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver
-
-Douglas Schilling Landgraf (13):
- V4L/DVB (10323): em28xx: Add entry for GADMEI TVR200
- V4L/DVB (10326): em28xx: Cleanup: fix bad whitespacing
- V4L/DVB (10327): em28xx: Add check before call em28xx_isoc_audio_deinit()
- V4L/DVB (10517): em28xx: remove bad check (changeset a31c595188af)
- V4L/DVB (10520): em28xx-audio: Add spinlock for trigger
- V4L/DVB (10521): em28xx-audio: Add lock for users
- V4L/DVB (10523): em28xx-audio: Add macros EM28XX_START_AUDIO / EM28XX_STOP_AUDIO
- V4L/DVB (10524): em28xx: Add DVC 101 model to Pinnacle Dazzle description
- V4L/DVB (10556): em28xx-cards: Add Pinnacle Dazzle Video Creator Plus DVC107 description
- V4L/DVB (10739): em28xx-cards: remove incorrect entry
- V4L/DVB (10740): em28xx-cards: Add SIIG AVTuner-PVR board
- V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker support
- V4L/DVB (11222): gspca - zc3xx: The webcam DLink DSB - C320 has the sensor pas106.
-
-Erik Andren (3):
- V4L/DVB (10334): gspca - stv06xx: Rework control description.
- V4L/DVB (10341): gspca - stv06xx: Plug a memory leak in the pb0100 sensor driver.
- V4L/DVB (10342): gspca - stv06xx: Add ctrl caching to the vv6410.
-
-Erik S. Beiser (1):
- V4L/DVB (10826): cx88: Add IR support to pcHDTV HD3000 & HD5500
-
-Guennadi Liakhovetski (9):
- V4L/DVB (10665): soc-camera: add data signal polarity flags to drivers
- V4L/DVB (10672): sh_mobile_ceu_camera: include NV* formats into the format list only once.
- V4L/DVB (10673): mt9t031: fix gain and hflip controls, register update, and scaling
- V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCs
- V4L/DVB (10675): soc-camera: extend soc_camera_bus_param_compatible with more tests
- V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations
- V4L/DVB (11025): soc-camera: configure drivers with a default format on open
- V4L/DVB (11026): sh-mobile-ceu-camera: set field to the value, configured at open()
- V4L/DVB (11027): soc-camera: configure drivers with a default format at probe time
-
-Hans Verkuil (171):
- V4L/DVB (10231): v4l2-subdev: add v4l2_ext_controls support
- V4L/DVB (10244): v4l2: replace a few snprintfs with strlcpy
- V4L/DVB (10246): saa6752hs: convert to v4l2_subdev.
- V4L/DVB (10247): saa7134: convert to the new v4l2 framework.
- V4L/DVB (10249): v4l2-common: added v4l2_i2c_tuner_addrs()
- V4L/DVB (10251): cx25840: add comments explaining what the init() does.
[...112824 lines suppressed...]
-- if(copy_to_user(arg,&v, sizeof(v)))
-- return -EFAULT;
-+ }
-+ return -EINVAL;
-+}
-+
-+static int vidioc_g_ctrl(struct file *file, void *priv,
-+ struct v4l2_control *ctrl)
-+{
-+ struct snd_tea575x *tea = video_drvdata(file);
-+
-+ switch (ctrl->id) {
-+ case V4L2_CID_AUDIO_MUTE:
-+ if (tea->ops->mute) {
-+ ctrl->value = tea->mute;
- return 0;
- }
-- case VIDIOCSAUDIO:
-- {
-- struct video_audio v;
-- if(copy_from_user(&v, arg, sizeof(v)))
-- return -EFAULT;
-- if (tea->ops->mute)
-- tea->ops->mute(tea,
-- (v.flags &
-- VIDEO_AUDIO_MUTE) ? 1 : 0);
-- if(v.audio)
-- return -EINVAL;
-+ }
-+ return -EINVAL;
-+}
-+
-+static int vidioc_s_ctrl(struct file *file, void *priv,
-+ struct v4l2_control *ctrl)
-+{
-+ struct snd_tea575x *tea = video_drvdata(file);
-+
-+ switch (ctrl->id) {
-+ case V4L2_CID_AUDIO_MUTE:
-+ if (tea->ops->mute) {
-+ tea->ops->mute(tea, ctrl->value);
-+ tea->mute = 1;
- return 0;
- }
-- default:
-- return -ENOIOCTLCMD;
- }
-+ return -EINVAL;
-+}
-+
-+static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-+{
-+ *i = 0;
-+ return 0;
- }
-
--static void snd_tea575x_release(struct video_device *vfd)
-+static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
- {
-+ if (i != 0)
-+ return -EINVAL;
-+ return 0;
- }
-
- static int snd_tea575x_exclusive_open(struct file *file)
-@@ -189,50 +260,91 @@ static int snd_tea575x_exclusive_release(struct file *file)
- return 0;
- }
-
-+static const struct v4l2_file_operations tea575x_fops = {
-+ .owner = THIS_MODULE,
-+ .open = snd_tea575x_exclusive_open,
-+ .release = snd_tea575x_exclusive_release,
-+ .ioctl = video_ioctl2,
-+};
-+
-+static const struct v4l2_ioctl_ops tea575x_ioctl_ops = {
-+ .vidioc_querycap = vidioc_querycap,
-+ .vidioc_g_tuner = vidioc_g_tuner,
-+ .vidioc_s_tuner = vidioc_s_tuner,
-+ .vidioc_g_audio = vidioc_g_audio,
-+ .vidioc_s_audio = vidioc_s_audio,
-+ .vidioc_g_input = vidioc_g_input,
-+ .vidioc_s_input = vidioc_s_input,
-+ .vidioc_g_frequency = vidioc_g_frequency,
-+ .vidioc_s_frequency = vidioc_s_frequency,
-+ .vidioc_queryctrl = vidioc_queryctrl,
-+ .vidioc_g_ctrl = vidioc_g_ctrl,
-+ .vidioc_s_ctrl = vidioc_s_ctrl,
-+};
-+
-+static struct video_device tea575x_radio = {
-+ .name = "tea575x-tuner",
-+ .fops = &tea575x_fops,
-+ .ioctl_ops = &tea575x_ioctl_ops,
-+ .release = video_device_release,
-+};
-+
- /*
- * initialize all the tea575x chips
- */
- void snd_tea575x_init(struct snd_tea575x *tea)
- {
-+ int retval;
- unsigned int val;
-+ struct video_device *tea575x_radio_inst;
-
- val = tea->ops->read(tea);
- if (val == 0x1ffffff || val == 0) {
-- snd_printk(KERN_ERR "Cannot find TEA575x chip\n");
-+ snd_printk(KERN_ERR
-+ "tea575x-tuner: Cannot find TEA575x chip\n");
- return;
- }
-
-- memset(&tea->vd, 0, sizeof(tea->vd));
-- strcpy(tea->vd.name, tea->tea5759 ? "TEA5759 radio" : "TEA5757 radio");
-- tea->vd.release = snd_tea575x_release;
-- video_set_drvdata(&tea->vd, tea);
-- tea->vd.fops = &tea->fops;
- tea->in_use = 0;
-- tea->fops.owner = tea->card->module;
-- tea->fops.open = snd_tea575x_exclusive_open;
-- tea->fops.release = snd_tea575x_exclusive_release;
-- tea->fops.ioctl = snd_tea575x_ioctl;
-- if (video_register_device(&tea->vd, VFL_TYPE_RADIO, tea->dev_nr - 1) < 0) {
-- snd_printk(KERN_ERR "unable to register tea575x tuner\n");
-+ tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40;
-+ tea->freq = 90500 * 16; /* 90.5Mhz default */
-+
-+ tea575x_radio_inst = video_device_alloc();
-+ if (tea575x_radio_inst == NULL) {
-+ printk(KERN_ERR "tea575x-tuner: not enough memory\n");
- return;
- }
-- tea->vd_registered = 1;
-
-- tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40;
-- tea->freq = 90500 * 16; /* 90.5Mhz default */
-+ memcpy(tea575x_radio_inst, &tea575x_radio, sizeof(tea575x_radio));
-+
-+ strcpy(tea575x_radio.name, tea->tea5759 ?
-+ "TEA5759 radio" : "TEA5757 radio");
-+
-+ video_set_drvdata(tea575x_radio_inst, tea);
-+
-+ retval = video_register_device(tea575x_radio_inst,
-+ VFL_TYPE_RADIO, radio_nr);
-+ if (retval) {
-+ printk(KERN_ERR "tea575x-tuner: can't register video device!\n");
-+ kfree(tea575x_radio_inst);
-+ return;
-+ }
-
- snd_tea575x_set_freq(tea);
-
- /* mute on init */
-- if (tea->ops->mute)
-+ if (tea->ops->mute) {
- tea->ops->mute(tea, 1);
-+ tea->mute = 1;
-+ }
-+ tea->vd = tea575x_radio_inst;
- }
-
- void snd_tea575x_exit(struct snd_tea575x *tea)
- {
-- if (tea->vd_registered) {
-- video_unregister_device(&tea->vd);
-- tea->vd_registered = 0;
-+ if (tea->vd) {
-+ video_unregister_device(tea->vd);
-+ tea->vd = NULL;
- }
- }
-
-diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
-index 82b9bdd..6cc18bf 100644
---- a/sound/pci/Kconfig
-+++ b/sound/pci/Kconfig
-@@ -487,7 +487,7 @@ config SND_FM801
- config SND_FM801_TEA575X_BOOL
- bool "ForteMedia FM801 + TEA5757 tuner"
- depends on SND_FM801
-- depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
-+ depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
- help
- Say Y here to include support for soundcards based on the ForteMedia
- FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
---- linux-2.6.30.noarch/drivers/media/video/hdpvr/hdpvr-i2c.c~ 2009-07-09 21:56:58.000000000 -0400
-+++ linux-2.6.30.noarch/drivers/media/video/hdpvr/hdpvr-i2c.c 2009-07-09 21:57:34.000000000 -0400
-@@ -64,7 +64,7 @@ static int hdpvr_i2c_write(struct hdpvr_
-
- ret = usb_control_msg(dev->udev,
- usb_rcvctrlpipe(dev->udev, 0),
-- REQTYPE_I2C_WRITE_STAT, CTRL_READ_REQUEST,
-+ REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST,
- 0, 0, buf, 2, 1000);
-
- if (ret == 2)
linux-2.6-v4l-dvb-update.patch:
0 files changed
Index: linux-2.6-v4l-dvb-update.patch
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/linux-2.6-v4l-dvb-update.patch,v
retrieving revision 1.14
retrieving revision 1.15
diff -u -p -r1.14 -r1.15
--- linux-2.6-v4l-dvb-update.patch 28 Mar 2009 12:52:34 -0000 1.14
+++ linux-2.6-v4l-dvb-update.patch 24 Feb 2010 23:14:10 -0000 1.15
@@ -1,366 +0,0 @@
-Mauro Carvalho Chehab (1):
- Merge branch 'next' of ../devel into Fedora
-
-Uri Shkolnik (1):
- V4L/DVB (11241): Siano: SDIO interface driver - remove two redundant lines
-
-diff --git a/linux/drivers/media/dvb/siano/smssdio.c b/linux/drivers/media/dvb/siano/smssdio.c
-new file mode 100644
-index 0000000..4f8fa59
---- /dev/null
-+++ b/linux/drivers/media/dvb/siano/smssdio.c
-@@ -0,0 +1,354 @@
-+/*
-+ * smssdio.c - Siano 1xxx SDIO interface driver
-+ *
-+ * Copyright 2008 Pierre Ossman
-+ *
-+ * Based on code by Siano Mobile Silicon, Inc.,
-+ * Copyright (C) 2006-2008, Uri Shkolnik
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or (at
-+ * your option) any later version.
-+ *
-+ *
-+ * This hardware is a bit odd in that all transfers should be done
-+ * to/from the SMSSDIO_DATA register, yet the "increase address" bit
-+ * always needs to be set.
-+ *
-+ * Also, buffers from the card are always aligned to 128 byte
-+ * boundaries.
-+ */
-+
-+/*
-+ * General cleanup notes:
-+ *
-+ * - only typedefs should be name *_t
-+ *
-+ * - use ERR_PTR and friends for smscore_register_device()
-+ *
-+ * - smscore_getbuffer should zero fields
-+ *
-+ * Fix stop command
-+ */
-+
-+#include <linux/moduleparam.h>
-+#include <linux/firmware.h>
-+#include <linux/delay.h>
-+#include <linux/mmc/card.h>
-+#include <linux/mmc/sdio_func.h>
-+#include <linux/mmc/sdio_ids.h>
-+
-+#include "smscoreapi.h"
-+#include "sms-cards.h"
-+
-+/* Registers */
-+
-+#define SMSSDIO_DATA 0x00
-+#define SMSSDIO_INT 0x04
-+
-+static const struct sdio_device_id smssdio_ids[] = {
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
-+ .driver_data = SMS1XXX_BOARD_SIANO_STELLAR},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0),
-+ .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-+ {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
-+ .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
-+ { /* end: all zeroes */ },
-+};
-+
-+MODULE_DEVICE_TABLE(sdio, smssdio_ids);
-+
-+struct smssdio_device {
-+ struct sdio_func *func;
-+
-+ struct smscore_device_t *coredev;
-+
-+ struct smscore_buffer_t *split_cb;
-+};
-+
-+/*******************************************************************/
-+/* Siano core callbacks */
-+/*******************************************************************/
-+
-+static int smssdio_sendrequest(void *context, void *buffer, size_t size)
-+{
-+ int ret;
-+ struct smssdio_device *smsdev;
-+
-+ smsdev = context;
-+
-+ sdio_claim_host(smsdev->func);
-+
-+ while (size >= smsdev->func->cur_blksize) {
-+ ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
-+ if (ret)
-+ goto out;
-+
-+ buffer += smsdev->func->cur_blksize;
-+ size -= smsdev->func->cur_blksize;
-+ }
-+
-+ if (size) {
-+ ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
-+ buffer, size);
-+ }
-+
-+out:
-+ sdio_release_host(smsdev->func);
-+
-+ return ret;
-+}
-+
-+/*******************************************************************/
-+/* SDIO callbacks */
-+/*******************************************************************/
-+
-+static void smssdio_interrupt(struct sdio_func *func)
-+{
-+ int ret, isr;
-+
-+ struct smssdio_device *smsdev;
-+ struct smscore_buffer_t *cb;
-+ struct SmsMsgHdr_ST *hdr;
-+ size_t size;
-+
-+ smsdev = sdio_get_drvdata(func);
-+
-+ /*
-+ * The interrupt register has no defined meaning. It is just
-+ * a way of turning of the level triggered interrupt.
-+ */
-+ isr = sdio_readb(func, SMSSDIO_INT, &ret);
-+ if (ret) {
-+ dev_err(&smsdev->func->dev,
-+ "Unable to read interrupt register!\n");
-+ return;
-+ }
-+
-+ if (smsdev->split_cb == NULL) {
-+ cb = smscore_getbuffer(smsdev->coredev);
-+ if (!cb) {
-+ dev_err(&smsdev->func->dev,
-+ "Unable to allocate data buffer!\n");
-+ return;
-+ }
-+
-+ ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
-+ if (ret) {
-+ dev_err(&smsdev->func->dev,
-+ "Error %d reading initial block!\n", ret);
-+ return;
-+ }
-+
-+ hdr = cb->p;
-+
-+ if (hdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG) {
-+ smsdev->split_cb = cb;
-+ return;
-+ }
-+
-+ size = hdr->msgLength - smsdev->func->cur_blksize;
-+ } else {
-+ cb = smsdev->split_cb;
-+ hdr = cb->p;
-+
-+ size = hdr->msgLength - sizeof(struct SmsMsgHdr_ST);
-+
-+ smsdev->split_cb = NULL;
-+ }
-+
-+ if (hdr->msgLength > smsdev->func->cur_blksize) {
-+ void *buffer;
-+
-+ size = ALIGN(size, 128);
-+ buffer = cb->p + hdr->msgLength;
-+
-+ BUG_ON(smsdev->func->cur_blksize != 128);
-+
-+ /*
-+ * First attempt to transfer all of it in one go...
-+ */
-+ ret = sdio_read_blocks(smsdev->func, buffer,
-+ SMSSDIO_DATA, size / 128);
-+ if (ret && ret != -EINVAL) {
-+ smscore_putbuffer(smsdev->coredev, cb);
-+ dev_err(&smsdev->func->dev,
-+ "Error %d reading data from card!\n", ret);
-+ return;
-+ }
-+
-+ /*
-+ * ..then fall back to one block at a time if that is
-+ * not possible...
-+ *
-+ * (we have to do this manually because of the
-+ * problem with the "increase address" bit)
-+ */
-+ if (ret == -EINVAL) {
-+ while (size) {
-+ ret = sdio_read_blocks(smsdev->func,
-+ buffer, SMSSDIO_DATA, 1);
-+ if (ret) {
-+ smscore_putbuffer(smsdev->coredev, cb);
-+ dev_err(&smsdev->func->dev,
-+ "Error %d reading "
-+ "data from card!\n", ret);
-+ return;
-+ }
-+
-+ buffer += smsdev->func->cur_blksize;
-+ if (size > smsdev->func->cur_blksize)
-+ size -= smsdev->func->cur_blksize;
-+ else
-+ size = 0;
-+ }
-+ }
-+ }
-+
-+ cb->size = hdr->msgLength;
-+ cb->offset = 0;
-+
-+ smscore_onresponse(smsdev->coredev, cb);
-+}
-+
-+static int smssdio_probe(struct sdio_func *func,
-+ const struct sdio_device_id *id)
-+{
-+ int ret;
-+
-+ int board_id;
-+ struct smssdio_device *smsdev;
-+ struct smsdevice_params_t params;
-+
-+ board_id = id->driver_data;
-+
-+ smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL);
-+ if (!smsdev)
-+ return -ENOMEM;
-+
-+ smsdev->func = func;
-+
-+ memset(¶ms, 0, sizeof(struct smsdevice_params_t));
-+
-+ params.device = &func->dev;
-+ params.buffer_size = 0x5000; /* ?? */
-+ params.num_buffers = 22; /* ?? */
-+ params.context = smsdev;
-+
-+ snprintf(params.devpath, sizeof(params.devpath),
-+ "sdio\\%s", sdio_func_id(func));
-+
-+ params.sendrequest_handler = smssdio_sendrequest;
-+
-+ params.device_type = sms_get_board(board_id)->type;
-+
-+ if (params.device_type != SMS_STELLAR)
-+ params.flags |= SMS_DEVICE_FAMILY2;
-+ else {
-+ /*
-+ * FIXME: Stellar needs special handling...
-+ */
-+ ret = -ENODEV;
-+ goto free;
-+ }
-+
-+ ret = smscore_register_device(¶ms, &smsdev->coredev);
-+ if (ret < 0)
-+ goto free;
-+
-+ smscore_set_board_id(smsdev->coredev, board_id);
-+
-+ sdio_claim_host(func);
-+
-+ ret = sdio_enable_func(func);
-+ if (ret)
-+ goto release;
-+
-+ ret = sdio_set_block_size(func, 128);
-+ if (ret)
-+ goto disable;
-+
-+ ret = sdio_claim_irq(func, smssdio_interrupt);
-+ if (ret)
-+ goto disable;
-+
-+ sdio_set_drvdata(func, smsdev);
-+
-+ sdio_release_host(func);
-+
-+ ret = smscore_start_device(smsdev->coredev);
-+ if (ret < 0)
-+ goto reclaim;
-+
-+ return 0;
-+
-+reclaim:
-+ sdio_claim_host(func);
-+ sdio_release_irq(func);
-+disable:
-+ sdio_disable_func(func);
-+release:
-+ sdio_release_host(func);
-+ smscore_unregister_device(smsdev->coredev);
-+free:
-+ kfree(smsdev);
-+
-+ return ret;
-+}
-+
-+static void smssdio_remove(struct sdio_func *func)
-+{
-+ struct smssdio_device *smsdev;
-+
-+ smsdev = sdio_get_drvdata(func);
-+
-+ /* FIXME: racy! */
-+ if (smsdev->split_cb)
-+ smscore_putbuffer(smsdev->coredev, smsdev->split_cb);
-+
-+ smscore_unregister_device(smsdev->coredev);
-+
-+ sdio_claim_host(func);
-+ sdio_release_irq(func);
-+ sdio_disable_func(func);
-+ sdio_release_host(func);
-+
-+ kfree(smsdev);
-+}
-+
-+static struct sdio_driver smssdio_driver = {
-+ .name = "smssdio",
-+ .id_table = smssdio_ids,
-+ .probe = smssdio_probe,
-+ .remove = smssdio_remove,
-+};
-+
-+/*******************************************************************/
-+/* Module functions */
-+/*******************************************************************/
-+
-+int smssdio_register(void)
-+{
-+ int ret = 0;
-+
-+ printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n");
-+ printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n");
-+
-+ ret = sdio_register_driver(&smssdio_driver);
-+
-+ return ret;
-+}
-+
-+void smssdio_unregister(void)
-+{
-+ sdio_unregister_driver(&smssdio_driver);
-+}
-+
-+MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver");
-+MODULE_AUTHOR("Pierre Ossman");
-+MODULE_LICENSE("GPL");
--- linux-2.6-revert-dvb-net-kabi-change.patch DELETED ---
--- v4l-dvb-fix-cx25840-firmware-loading.patch DELETED ---
- Previous message: rpms/kernel/devel patch-2.6.33-rc8-git6.bz2.sign, 1.1, NONE patch-2.6.33-rc8.bz2.sign, 1.1, NONE
- Next message: rpms/kernel/devel config-generic, 1.354, 1.355 config-ia64-generic, 1.27, 1.28 config-powerpc-generic, 1.54, 1.55 config-powerpc32-generic, 1.37, 1.38 config-powerpc64, 1.36, 1.37 config-rhel-generic, 1.17, 1.18 config-s390x, 1.21, 1.22 config-sparc64-generic, 1.31, 1.32 config-x86-generic, 1.93, 1.94 config-x86_64-generic, 1.99, 1.100 kernel.spec, 1.1937, 1.1938
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the scm-commits
mailing list