[mdadm] Update the default superblock type when passing just '1' in the man page as it was incorrect accordi

[Doug Ledford]

commit 40a50da058780543fb7e9ee0a24bfab8f87ea772
Author: Doug Ledford <dledford at redhat.com>
Date:   Thu Jul 14 20:28:36 2011 -0400

    Update the default superblock type when passing just '1' in the man page
    as it was incorrect according to the man page versus what was actually
    happening.

 mdadm-3.2.2-man.patch |   23 ++++++++++++++++-------
 mdadm.spec            |    6 +++++-
 2 files changed, 21 insertions(+), 8 deletions(-)
---
diff --git a/mdadm-3.2.2-man.patch b/mdadm-3.2.2-man.patch
index c559c66..48eb243 100644
--- a/mdadm-3.2.2-man.patch
+++ b/mdadm-3.2.2-man.patch
@@ -1,5 +1,14 @@
---- a/mdadm.8.in
-+++ b/mdadm.8.in
+--- mdadm-3.2.2/mdadm.8.in.man	2011-06-17 01:15:50.000000000 -0400
++++ mdadm-3.2.2/mdadm.8.in	2011-07-14 20:18:49.240997107 -0400
+@@ -336,7 +336,7 @@ It can easily be moved between hosts wit
+ recovery operation can be checkpointed and restarted.  The different
+ sub-versions store the superblock at different locations on the
+ device, either at the end (for 1.0), at the start (for 1.1) or 4K from
+-the start (for 1.2).  "1" is equivalent to "1.0".
++the start (for 1.2).  "1" is equivalent to "1.2".
+ 'if '{DEFAULT_METADATA}'1.2'  "default" is equivalent to "1.2".
+ .IP ddf
+ Use the "Industry Standard" DDF (Disk Data Format) format defined by
 @@ -706,7 +706,7 @@ facts the operator knows.
  When an array is resized to a larger size with
  .B "\-\-grow \-\-size="
@@ -9,7 +18,7 @@
  .B \-\-assume\-clean
  can be used with that command to avoid the automatic resync.
  
-@@ -811,6 +811,11 @@ number, and there is no entry in /dev for that number and with a
+@@ -811,6 +811,11 @@ number, and there is no entry in /dev fo
  non-standard name.  Names that are not in 'standard' format are only
  allowed in "/dev/md/".
  
@@ -97,7 +106,7 @@
  .BR <ignore> )
  it will look through the available devices for possible arrays and
  will try to assemble anything that it finds.  Arrays which are tagged
-@@ -2200,11 +2205,11 @@ change the "size" attribute for RAID1, RAID4, RAID5 and RAID6.
+@@ -2200,11 +2205,11 @@ change the "size" attribute for RAID1, R
  .IP \(bu 4
  increase or decrease the "raid\-devices" attribute of RAID0, RAID1, RAID4,
  RAID5, and RAID6.
@@ -112,7 +121,7 @@
  .IP \(bu 4
  add a write-intent bitmap to any array which supports these bitmaps, or
  remove a write-intent bitmap from such an array.
-@@ -2250,7 +2255,7 @@ space to start being used.  If the size is increased in this way, a
+@@ -2250,7 +2255,7 @@ space to start being used.  If the size 
  are synchronised.
  
  Note that when an array changes size, any filesystem that may be
@@ -130,7 +139,7 @@
  
  .SS RAID\-DEVICES CHANGES
  
-@@ -2435,8 +2440,8 @@ must match one of the names or patterns in a
+@@ -2435,8 +2440,8 @@ must match one of the names or patterns 
  line.
  
  .IP +
@@ -141,7 +150,7 @@
  .B \-\-metadata
  or
  .B \-e
-@@ -2467,6 +2472,7 @@ is not able to positively identify the array as belonging to the
+@@ -2467,6 +2472,7 @@ is not able to positively identify the a
  current host, the device will be rejected.
  ..
  
diff --git a/mdadm.spec b/mdadm.spec
index 5b3ccc0..4262d15 100644
--- a/mdadm.spec
+++ b/mdadm.spec
@@ -1,7 +1,7 @@
 Summary:     The mdadm program controls Linux md devices (software RAID arrays)
 Name:        mdadm
 Version:     3.2.2
-Release:     3%{?dist}
+Release:     4%{?dist}
 Source:      http://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-%{version}.tar.bz2
 Source1:     mdmonitor.init
 Source2:     raid-check
@@ -125,6 +125,10 @@ fi
 %{_initrddir}/*
 
 %changelog
+* Thu Jul 14 2011 Doug Ledford <dledford at redhat.com> - 3.2.2-4
+- Fix minor issue in man page
+- Resolves: bz717795
+
 * Thu Jul 07 2011 Milan Broz <mbroz at redhat.com> - 3.2.2-3
 - Use unit files with systemd. (johannbg)
 - Add sub-package sysvinit for SysV init script.