[firewalld/f17] - firewall-cmd: several changes and fixes - code cleanup - fixed icmp protocol used for ipv6 (rhbz#8

[Thomas Woerner]

commit 8c3ae5b467a4182c48756b2fa1210d5a0feed4bb
Author: Thomas Woerner <twoerner at redhat.com>
Date:   Thu Mar 15 22:36:11 2012 +0100

    - firewall-cmd: several changes and fixes
    - code cleanup
    - fixed icmp protocol used for ipv6 (rhbz#801182)
    - added and fixed some comments
    - properly restore zone settings, timeout is always set, check for 0
    - some FirewallError exceptions were actually not raised
    - do not REJECT in each zone
    - removeInterface() don't require zone
    - new tests in firewall-test script
    - dbus_to_python() was ignoring certain values
    - added functions for the direct interface: chains, rules, passthrough
    - fixed inconsistent data after reload
    - some fixes for the direct interface: priority positions are bound to ipv,
      table and chain
    - added support for direct interface in firewall-cmd:
    - added isImmutable(zone) to zone D-Bus interface
    - renamed policy file
    - enhancements for error messages, enables output for direct.passthrough
    - added allow_any to firewald policies, using at leas auth_admin for policies
    - replaced ENABLE_FAILED, DISABLE_FAILED, ADD_FAILED and REMOVE_FAILED by
      COMMAND_FAILED, resorted error codes
    - new firewalld configuration setting CleanupOnExit
    - enabled polkit again, found a fix for property problem with slip.dbus.service
    - added dhcpv6-client to 'public' (the default) and to 'internal' zones.
    - fixed missing settings form zone config files in
      "firewall-cmd --list=all --zone=<zone>" call
    - added list functions for services and icmptypes, added --list=services and
      --list=icmptypes to firewall-cmd

 .gitignore     |    1 +
 firewalld.spec |   34 ++++++++++++++++++++++++++++++++--
 sources        |    2 +-
 3 files changed, 34 insertions(+), 3 deletions(-)
---
diff --git a/.gitignore b/.gitignore
index 476a21b..4ce3a8d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,3 +3,4 @@
 /firewalld-0.2.0.tar.bz2
 /firewalld-0.2.1.tar.bz2
 /firewalld-0.2.2.tar.bz2
+/firewalld-0.2.3.tar.bz2
diff --git a/firewalld.spec b/firewalld.spec
index d88b43e..27ed459 100644
--- a/firewalld.spec
+++ b/firewalld.spec
@@ -2,7 +2,7 @@
 
 Summary: A firewall daemon with D-BUS interface providing a dynamic firewall
 Name: firewalld
-Version: 0.2.2
+Version: 0.2.3
 Release: 1%{?dist}
 URL: http://fedorahosted.org/firewalld
 License: GPLv2+
@@ -152,7 +152,7 @@ fi
 #%attr(0755,root,root) %{_initrddir}/firewalld
 %{_unitdir}/firewalld.service
 %config(noreplace) %{_sysconfdir}/dbus-1/system.d/FirewallD.conf
-%{_datadir}/polkit-1/actions/org.fedoraproject.FirewallD.policy
+%{_datadir}/polkit-1/actions/org.fedoraproject.FirewallD1.policy
 %attr(0755,root,root) %dir %{python_sitelib}/firewall
 %attr(0755,root,root) %dir %{python_sitelib}/firewall/config
 %attr(0755,root,root) %dir %{python_sitelib}/firewall/core
@@ -182,6 +182,36 @@ fi
 #%{_datadir}/icons/hicolor/*/apps/firewall-config*.*
 
 %changelog
+* Thu Mar 15 2012 Thomas Woerner <twoerner at redhat.com> 0.2.3-1
+- firewall-cmd: several changes and fixes
+- code cleanup
+- fixed icmp protocol used for ipv6 (rhbz#801182)
+- added and fixed some comments
+- properly restore zone settings, timeout is always set, check for 0
+- some FirewallError exceptions were actually not raised
+- do not REJECT in each zone
+- removeInterface() don't require zone
+- new tests in firewall-test script
+- dbus_to_python() was ignoring certain values
+- added functions for the direct interface: chains, rules, passthrough
+- fixed inconsistent data after reload
+- some fixes for the direct interface: priority positions are bound to ipv,
+  table and chain
+- added support for direct interface in firewall-cmd:
+- added isImmutable(zone) to zone D-Bus interface
+- renamed policy file
+- enhancements for error messages, enables output for direct.passthrough
+- added allow_any to firewald policies, using at leas auth_admin for policies
+- replaced ENABLE_FAILED, DISABLE_FAILED, ADD_FAILED and REMOVE_FAILED by
+  COMMAND_FAILED, resorted error codes
+- new firewalld configuration setting CleanupOnExit
+- enabled polkit again, found a fix for property problem with slip.dbus.service
+- added dhcpv6-client to 'public' (the default) and to 'internal' zones.
+- fixed missing settings form zone config files in
+  "firewall-cmd --list=all --zone=<zone>" call
+- added list functions for services and icmptypes, added --list=services and
+  --list=icmptypes to firewall-cmd
+
 * Tue Mar  6 2012 Thomas Woerner <twoerner at redhat.com> 0.2.2-1
 - enabled dhcpv6-client service for zones home and work
 - new dhcpv6-client service
diff --git a/sources b/sources
index 1be2d04..9dbfc39 100644
--- a/sources
+++ b/sources
@@ -1 +1 @@
-833984002803b56794fdf2bfca271d8f  firewalld-0.2.2.tar.bz2
+0a3e6bdb133d156ec781100750544630  firewalld-0.2.3.tar.bz2