[ptpd] updated to support ptpd 2.3

[jondkent]

commit 41df15d98afb7182cbebabe44b44849fecabda6d
Author: Jon Kent <jon.kent at gmail.com>
Date:   Sun Jun 8 17:17:26 2014 +0100

    updated to support ptpd 2.3

 ptpd.conf |   61 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 61 insertions(+), 0 deletions(-)
---
diff --git a/ptpd.conf b/ptpd.conf
new file mode 100644
index 0000000..afa6fa4
--- /dev/null
+++ b/ptpd.conf
@@ -0,0 +1,61 @@
+; ==============================================================================
+; This is a recommended configuration for a PTPv2 slave
+; For a full list of options run ptpd2 -H or see the documentation and man pages
+; ==============================================================================
+
+; interface has to be specified
+ptpengine:interface=
+
+; PTP domain
+ptpengine:domain=0
+
+; available presets are slaveonly, masteronly and masterslave (full IEEE 1588 implementation)
+ptpengine:preset=slaveonly
+
+; multicast for both sync and delay requests - use hybrid for unicast delay requests
+ptpengine:ip_mode=multicast
+
+; when enabled, sniffing is used instead of sockets to send and receive packets
+ptpengine:use_libpcap=n
+
+; go into panic mode for 10 minutes instead of resetting the clock
+ptpengine:panic_mode=y
+ptpengine:panic_mode_duration=10
+
+; uncomment this to enable outlier filters
+ptpengine:sync_outlier_filter_enable=y
+ptpengine:delay_outlier_filter_enable=y
+
+; store observed drift in a file
+clock:drift_handling=file
+
+; update online statistics every 5 seconds
+global:statistics_update_interval=5
+
+; wait 5 statistics intervals for one-way delay to stabilise
+ptpengine:calibration_delay=5
+
+; log file, event log only. if timing statistics are needed, see statistics_file
+global:log_file=/var/log/ptpd2.log
+; log file up to 5M
+global:log_file_max_size=5000
+; rotate logs up to 5 files
+global:log_fie_max_files=5
+
+; status file providing an overview of ptpd's operation and statistics
+global:log_status=y
+
+; required if ip_mode is set to hybrid
+;ptpengine:log_delayreq_interval=0
+
+; uncomment this to log a timing log like in previous ptpd versions
+;global:statistics_file=/var/log/ptpd2.stats
+
+; on multi-core systems it is recommended to bind ptpd to a single core
+;global:cpuaffinity_cpucore=0
+
+; use DSCP 46 for expedited forwarding over ipv4 networks
+ptpengine:ip_dscp=46
+
+; always keep a new line in the end
+