[kernel/f21] Linux v3.19.1
Justin M. Forbes
jforbes at fedoraproject.org
Mon Mar 16 17:35:11 UTC 2015
commit 98a08a40e07de02d0797788d0dbf1fc33e14c2dd
Author: Justin M. Forbes <jforbes at redhat.com>
Date: Mon Mar 16 12:35:05 2015 -0500
Linux v3.19.1
Add-sysrq-option-to-disable-secure-boot-mode.patch | 16 +-
...th3k-Add-support-Atheros-AR5B195-combo-Mi.patch | 6 +-
...d-support-for-MS-Surface-Pro-3-Type-Cover.patch | 84 -
...-in-sess_auth_rawntlmssp_authenticate-too.patch | 44 -
...Add-disable_native_backlight-quirk-for-De.patch | 37 -
arm-dts-sun7i-bananapi.patch | 213 -
arm64-fix-ooo-descriptor-read.patch | 64 -
arm64-revert-tlb-rcu_table_free.patch | 151 -
config-arm-generic | 17 +
config-arm64 | 21 +-
config-armv7 | 44 +-
config-armv7-generic | 156 +-
config-armv7-lpae | 4 +-
config-debug | 4 +
config-generic | 153 +-
config-nodebug | 6 +-
config-powerpc-generic | 3 +
config-powerpc64 | 6 +-
config-powerpc64p7 | 5 +-
config-s390x | 3 +-
config-x86-32-generic | 2 +
config-x86-generic | 27 +-
config-x86_64-generic | 2 +
drm-i915-Disable-verbose-state-checks.patch | 31 -
drm-i915-hush-check-crtc-state.patch | 31 +
drm-i915-tame-the-chattermouth-v2.patch | 127 +-
...e-Disable-in-a-signed-modules-environment.patch | 8 +-
...otimeout-quirk-for-Fujitsu-Lifebook-A544-.patch | 45 +
kernel-arm64.patch | 7658 ++------------------
kernel.spec | 76 +-
mpssd-x86-only.patch | 27 -
...-correct-size-for-max-unacked-packets-and.patch | 40 -
...all-blocking-operations-while-TASK_RUNNIN.patch | 91 +
...rpc-powernv-force-all-CPUs-to-be-bootable.patch | 46 -
...top-Add-broken-acpi-video-quirk-for-NC210.patch | 39 -
silence-fbcon-logo.patch | 4 +-
sources | 6 +-
...FL_NO_ATA_1X-for-2-more-Seagate-disk-encl.patch | 48 -
uas-Do-not-blacklist-ASM1153-disk-enclosures.patch | 94 -
39 files changed, 1119 insertions(+), 8320 deletions(-)
---
diff --git a/Add-sysrq-option-to-disable-secure-boot-mode.patch b/Add-sysrq-option-to-disable-secure-boot-mode.patch
index b9d220c..bbd41f2 100644
--- a/Add-sysrq-option-to-disable-secure-boot-mode.patch
+++ b/Add-sysrq-option-to-disable-secure-boot-mode.patch
@@ -15,7 +15,7 @@ Upstream-status: Fedora mustard
7 files changed, 65 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
-index bc31a43b31a0..5f80d12a55cb 100644
+index b40d6174242f..0ee7749bad74 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -70,6 +70,11 @@
@@ -215,23 +215,23 @@ index 387fa7d05c98..4b07e30b3279 100644
int unregister_sysrq_key(int key, struct sysrq_key_op *op);
struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
-index 6ffdc96059a0..2f8f814ae94c 100644
+index 7b40c5f07dce..8a60477b96e1 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
-@@ -1924,7 +1924,7 @@ static int kdb_sr(int argc, const char **argv)
- if (argc != 1)
+@@ -1968,7 +1968,7 @@ static int kdb_sr(int argc, const char **argv)
return KDB_ARGCOUNT;
+
kdb_trap_printk++;
-- __handle_sysrq(*argv[1], false);
-+ __handle_sysrq(*argv[1], SYSRQ_FROM_KERNEL);
+- __handle_sysrq(*argv[1], check_mask);
++ __handle_sysrq(*argv[1], check_mask & SYSRQ_FROM_KERNEL);
kdb_trap_printk--;
return 0;
diff --git a/kernel/module.c b/kernel/module.c
-index cace4bd04956..a33be993df25 100644
+index 6244f24abe27..b77554170d76 100644
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -108,9 +108,9 @@ struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+@@ -107,9 +107,9 @@ struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
#ifdef CONFIG_MODULE_SIG
#ifdef CONFIG_MODULE_SIG_FORCE
diff --git a/Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch b/Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch
index d09756e..38afde1 100644
--- a/Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch
+++ b/Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch
@@ -43,7 +43,7 @@ Cc: stable at vger.kernel.org
2 files changed, 2 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
-index fe1678c4ff89..99e9d879a460 100644
+index 086240cd29c3..b2c68213696a 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_table[] = {
@@ -55,10 +55,10 @@ index fe1678c4ff89..99e9d879a460 100644
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
-index f0e2f721c8ce..d8b5b37aa1bd 100644
+index 091c813df8e9..79e344f9e681 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
-@@ -150,6 +150,7 @@ static const struct usb_device_id blacklist_table[] = {
+@@ -142,6 +142,7 @@ static const struct usb_device_id blacklist_table[] = {
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
diff --git a/config-arm-generic b/config-arm-generic
index c0fa94d..c47b3e9 100644
--- a/config-arm-generic
+++ b/config-arm-generic
@@ -25,6 +25,7 @@ CONFIG_RESET_GPIO=y
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GENERIC=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_ARM_SP805_WATCHDOG=m
CONFIG_ARM_ARCH_TIMER=y
@@ -40,11 +41,15 @@ CONFIG_HAVE_PERF_USER_STACK_DUMP=y
# ARM AMBA generic HW
CONFIG_ARM_AMBA=y
+# CONFIG_TEGRA_AHB is not set
CONFIG_ARM_CCI=y
CONFIG_ARM_CCN=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
CONFIG_KVM_ARM_VGIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_SMMU=y
@@ -79,6 +84,7 @@ CONFIG_POWER_RESET_VERSATILE=y
CONFIG_DTC=y
CONFIG_DMA_OF=y
CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
CONFIG_OF_ADDRESS=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_EARLY_FLATTREE=y
@@ -88,10 +94,12 @@ CONFIG_OF_IOMMU=y
CONFIG_OF_IRQ=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
CONFIG_OF_PCI_IRQ=m
CONFIG_OF_PCI=m
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_PATA_OF_PLATFORM=m
# CONFIG_OF_SELFTEST is not set
CONFIG_SERIAL_OF_PLATFORM=y
@@ -101,6 +109,11 @@ CONFIG_THERMAL_OF=y
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# USB
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_XHCI_PLATFORM=m
+
# External Connectors
CONFIG_EXTCON=m
CONFIG_EXTCON_GPIO=m
@@ -134,6 +147,7 @@ CONFIG_BACKLIGHT_GPIO=m
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_RESTART=y
+# CONFIG_GPIO_74XX_MMIO is not set
#i2c
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
@@ -200,6 +214,8 @@ CONFIG_CMA_AREAS=7
# CONFIG_PATA_PLATFORM is not set
# CONFIG_USB_ULPI is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_PHY_SAMSUNG_USB2 is not set
### turn off things which make no sense on embedded SoC
@@ -260,6 +276,7 @@ CONFIG_CMA_AREAS=7
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
+# CONFIG_CORESIGHT is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_BMP085_SPI is not set
diff --git a/config-arm64 b/config-arm64
index 9fd40b9..1c48624 100644
--- a/config-arm64
+++ b/config-arm64
@@ -8,8 +8,16 @@ CONFIG_SCHED_SMT=y
# arm64 only SoCs
CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_SEATTLE=y
# CONFIG_ARCH_THUNDER is not set
+# Erratum
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+
# CONFIG_AMBA_PL08X is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -78,6 +86,7 @@ CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=m
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
+CONFIG_CRYPTO_CRC32_ARM64=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
@@ -112,11 +121,10 @@ CONFIG_HOTPLUG_PCI=y
# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
# CONFIG_PNP_DEBUG_MESSAGES is not set
-CONFIG_NET_SB1000=y
CONFIG_SBSAUART_TTY=y
CONFIG_I2C_SCMI=m
CONFIG_SENSORS_ACPI_POWER=m
-CONFIG_PWM_LPSS=m
+
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=y
@@ -128,17 +136,20 @@ CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HED=m
CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_NET_SB1000=y
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_PHY=m
# CONFIG_AMD_XGBE_DCB is not set
# CONFIG_IMX_THERMAL is not set
-
-# still? 2014-11-11
-# CONFIG_BPF_JIT is not set
+# CONFIG_MMC_DW is not set
CONFIG_DMI=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_SATA_AHCI_PLATFORM=y
+
+# CONFIG_SND_SOC is not set
+
+# CONFIG_PMIC_OPREGION is not set
diff --git a/config-armv7 b/config-armv7
index 8eb0e1a..f071dd9 100644
--- a/config-armv7
+++ b/config-armv7
@@ -4,15 +4,12 @@
# CONFIG_ARCH_KEYSTONE is not set
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_ARCH_PICOXCELL=y
CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_U8500=y
-# CONFIG_ARCH_VIRT is not set
CONFIG_ARCH_ZYNQ=y
# These are supported in the LPAE kernel
@@ -80,7 +77,6 @@ CONFIG_SOC_TI81XX=y
# CONFIG_MACH_CRANEBOARD is not set
# CONFIG_MACH_DEVKIT8000 is not set
# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP3517EVM is not set
@@ -89,8 +85,6 @@ CONFIG_SOC_TI81XX=y
# CONFIG_MACH_OMAP3_TORPEDO is not set
# CONFIG_MACH_OVERO is not set
# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
# CONFIG_MACH_TOUCHBOOK is not set
CONFIG_SOC_HAS_REALTIME_COUNTER=y
@@ -109,14 +103,15 @@ CONFIG_OMAP_PM_NOOP=y
CONFIG_DMA_OMAP=y
CONFIG_OMAP_IOMMU=y
CONFIG_HWSPINLOCK_OMAP=m
-CONFIG_OMAP3_EMU=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_8250_OMAP=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
+CONFIG_GPIO_PCF857X=m
CONFIG_I2C_OMAP=m
CONFIG_CHARGER_TWL4030=m
CONFIG_OMAP_WATCHDOG=m
@@ -143,6 +138,7 @@ CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_OHCI_HCD_OMAP3=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_DWC3_OMAP=m
CONFIG_MMC_OMAP=m
CONFIG_MMC_OMAP_HS=y
CONFIG_RTC_DRV_MAX8907=m
@@ -242,10 +238,10 @@ CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
# Enable V4L2 drivers for OMAP2+
-CONFIG_MEDIA_CONTROLLER=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=m
+CONFIG_VIDEO_ADP1653=m
# CONFIG_VIDEO_OMAP4 is not set
# The ones below are for TI Davinci
# CONFIG_VIDEO_DM6446_CCDC is not set
@@ -255,10 +251,9 @@ CONFIG_SND_OMAP_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_OMAP_SOC_AM3517EVM=m
CONFIG_SND_OMAP_SOC_DMIC=m
-CONFIG_SND_OMAP_SOC_HDMI=m
+CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
CONFIG_SND_OMAP_SOC_MCBSP=m
CONFIG_SND_OMAP_SOC_MCPDM=m
-CONFIG_SND_OMAP_SOC_OMAP_HDMI=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
@@ -326,6 +321,7 @@ CONFIG_PINCTRL_APQ8084=m
CONFIG_PINCTRL_IPQ8064=m
CONFIG_PINCTRL_MSM8960=m
CONFIG_PINCTRL_MSM8X74=m
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
CONFIG_COMMON_CLK_QCOM=m
CONFIG_MFD_QCOM_RPM=m
CONFIG_MFD_PM8921_CORE=m
@@ -363,6 +359,10 @@ CONFIG_INPUT_PMIC8XXX_PWRKEY=m
CONFIG_RTC_DRV_PM8XXX=m
# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
CONFIG_QCOM_WDT=m
+CONFIG_MFD_SPMI_PMIC=m
+CONFIG_SPMI=m
+CONFIG_SPMI_MSM_PMIC_ARB=m
+CONFIG_QCOM_SPMI_IADC=m
# i.MX
# CONFIG_MXC_DEBUG_BOARD is not set
@@ -372,8 +372,10 @@ CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_IMX6SX=y
+# CONFIG_SOC_LS1021A is not set
# CONFIG_SOC_VF610 is not set
CONFIG_ARM_IMX6Q_CPUFREQ=m
+CONFIG_POWER_RESET_IMX=y
CONFIG_PCI_IMX6=y
CONFIG_IMX_THERMAL=m
CONFIG_IMX_SDMA=m
@@ -411,6 +413,7 @@ CONFIG_CRYPTO_DEV_SAHARA=m
CONFIG_RTC_DRV_SNVS=m
# CONFIG_FB_MX3 is not set
# CONFIG_FB_IMX is not set
+# CONFIG_FB_MXS is not set
CONFIG_SND_IMX_SOC=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
@@ -459,8 +462,6 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
CONFIG_DRM_IMX_TVE=m
CONFIG_VIDEO_CODA=m
-CONFIG_MFD_SYSCON=y
-CONFIG_GPIO_SYSCON=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_MC13783=m
@@ -501,27 +502,13 @@ CONFIG_REGULATOR_DA9055=m
CONFIG_ARCH_EXYNOS4=y
CONFIG_SOC_EXYNOS4212=y
CONFIG_SOC_EXYNOS4412=y
+CONFIG_SOC_EXYNOS4415=y
CONFIG_ARM_EXYNOS4210_CPUFREQ=y
CONFIG_ARM_EXYNOS4X12_CPUFREQ=y
CONFIG_AK8975=m
CONFIG_CM36651=m
CONFIG_KEYBOARD_SAMSUNG=m
-# Rockchips
-CONFIG_I2C_RK3X=m
-CONFIG_SPI_ROCKCHIP=m
-CONFIG_SND_SOC_ROCKCHIP=m
-CONFIG_PWM_ROCKCHIP=m
-CONFIG_ROCKCHIP_SARADC=m
-CONFIG_ROCKCHIP_IODOMAIN=m
-CONFIG_MMC_DW_ROCKCHIP=m
-CONFIG_EMAC_ROCKCHIP=m
-CONFIG_MFD_RK808=m
-CONFIG_COMMON_CLK_RK808=m
-CONFIG_REGULATOR_RK808=m
-CONFIG_RTC_DRV_HYM8563=m
-CONFIG_ROCKCHIP_SARADC=m
-
# ST Ericsson
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
@@ -544,7 +531,7 @@ CONFIG_INPUT_AB8500_PONKEY=m
CONFIG_REGULATOR_AB8500=y
CONFIG_AB8500_USB=m
CONFIG_USB_MUSB_UX500=m
-# CONFIG_USB_UX500_DMA is not set
+CONFIG_USB_UX500_DMA=y
CONFIG_RTC_DRV_AB8500=m
CONFIG_PWM_AB8500=m
CONFIG_SND_SOC_UX500=m
@@ -615,6 +602,7 @@ CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_COMMON_CLK_AXI_CLKGEN=m
CONFIG_COMMON_CLK_SI570=m
+CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_NET_VENDOR_XILINX=y
diff --git a/config-armv7-generic b/config-armv7-generic
index dd233a7..5be7d4b 100644
--- a/config-armv7-generic
+++ b/config-armv7-generic
@@ -2,8 +2,6 @@
# Generic ARM config options
CONFIG_ARM=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
@@ -52,10 +50,11 @@ CONFIG_IRQ_CROSSBAR=y
# Platforms enabled/disabled globally on ARMv7
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
+CONFIG_ARCH_VIRT=y
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_HI3xxx is not set
@@ -113,6 +112,8 @@ CONFIG_SCHED_SMT=y
CONFIG_RCU_FANOUT=32
+CONFIG_CHECKPOINT_RESTORE=y
+
# Power management / thermal / cpu scaling
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
@@ -123,6 +124,7 @@ CONFIG_PM_OPP=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_PSCI=y
CONFIG_THERMAL=y
+CONFIG_CLOCK_THERMAL=y
CONFIG_CPUFREQ_DT=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
@@ -134,6 +136,7 @@ CONFIG_XZ_DEC_ARM=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_PCI_HOST_GENERIC=y
+# CONFIG_PCI_LAYERSCAPE is not set
CONFIG_LBDAF=y
@@ -160,6 +163,7 @@ CONFIG_PL330_DMA=m
CONFIG_AMBA_PL08X=y
CONFIG_GPIO_PL061=y
CONFIG_PL320_MBOX=y
+CONFIG_SND_ARMAACI=m
# highbank
CONFIG_EDAC_HIGHBANK_MC=m
@@ -173,12 +177,12 @@ CONFIG_ARM_HIGHBANK_CPUFREQ=m
# CONFIG_MACH_SUN5I is not set
CONFIG_MACH_SUN6I=y
CONFIG_MACH_SUN7I=y
-# CONFIG_MACH_SUN8I is not set
+CONFIG_MACH_SUN8I=y
+# CONFIG_MACH_SUN9I is not set
CONFIG_DMA_SUN6I=m
CONFIG_SUNXI_WATCHDOG=m
CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_DWMAC_SUNXI=y
+CONFIG_STMMAC_PLATFORM=m
CONFIG_EEPROM_SUNXI_SID=m
CONFIG_RTC_DRV_SUNXI=m
CONFIG_PHY_SUN4I_USB=m
@@ -196,6 +200,8 @@ CONFIG_IR_SUNXI=m
CONFIG_MDIO_SUN4I=m
CONFIG_SUN4I_EMAC=m
CONFIG_RTC_DRV_SUN6I=m
+CONFIG_AXP288_ADC=m
+CONFIG_MTD_NAND_SUNXI=m
# Exynos
CONFIG_ARCH_EXYNOS3=y
@@ -228,6 +234,7 @@ CONFIG_MMC_DW_EXYNOS=m
CONFIG_EXYNOS_IOMMU=y
CONFIG_PCI_EXYNOS=y
CONFIG_PHY_EXYNOS5_USBDRD=m
+CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_USB_EHCI_EXYNOS=m
CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_DWC3_EXYNOS=m
@@ -241,10 +248,10 @@ CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_S3C=m
CONFIG_MFD_WM8994=m
CONFIG_GPIO_WM8994=m
CONFIG_REGULATOR_WM8994=m
-# CONFIG_RTC_DRV_S3C is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
@@ -308,6 +315,25 @@ CONFIG_RTC_DRV_MAX77802=m
CONFIG_RTC_DRV_RK808=m
CONFIG_EXTCON_MAX8997=m
+# Rockchips
+CONFIG_I2C_RK3X=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_PWM_ROCKCHIP=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IODOMAIN=m
+CONFIG_MMC_DW_ROCKCHIP=m
+CONFIG_EMAC_ROCKCHIP=m
+CONFIG_MFD_RK808=m
+CONFIG_COMMON_CLK_RK808=m
+CONFIG_REGULATOR_RK808=m
+CONFIG_RTC_DRV_HYM8563=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_I2S=m
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_DRM_ROCKCHIP=m
+
# Tegra
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
@@ -344,6 +370,8 @@ CONFIG_NOUVEAU_PLATFORM_DRIVER=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
+CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA_MC=y
# Jetson TK1
CONFIG_PINCTRL_AS3722=y
@@ -361,6 +389,7 @@ CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_LD9040=m
CONFIG_DRM_PANEL_S6E8AA0=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
# regmap
CONFIG_REGMAP=y
@@ -370,13 +399,7 @@ CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
-# Power management
-CONFIG_PM_OPP=y
-CONFIG_ARM_CPU_SUSPEND=y
-
# usb
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_ULPI=y
CONFIG_AX88796=m
@@ -387,12 +410,12 @@ CONFIG_USB_OTG=y
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_VBUS_DRAW=100
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-# Use PIO on musb as upstream doesn't support multiple DMA engines yet :-/
-CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_DUAL_ROLE=y
CONFIG_USB_MUSB_DSPS=m
+# CONFIG_USB_MUSB_TUSB6010 is not set
+# CONFIG_USB_MUSB_UX500 is not set
CONFIG_USB_GPIO_VBUS=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_ACM=y
@@ -406,17 +429,22 @@ CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_SERIAL=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
+# CONFIG_USB_CONFIGFS_F_UAC1 is not set
+# CONFIG_USB_CONFIGFS_F_UAC2 is not set
+# CONFIG_USB_CONFIGFS_F_MIDI is not set
+# CONFIG_USB_CONFIGFS_F_HID is not set
+# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_RENESAS_USBHS is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
@@ -571,96 +599,23 @@ CONFIG_SPI_DW_PCI=m
# CONFIG_MMC_DW_IDMAC is not set
# CONFIG_MMC_DW_K3 is not set
# CONFIG_MMC_QCOM_DML is not set
-# CONFIG_MMC_DW_ROCKCHIP is not set
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=m
-CONFIG_USB_DWC2_PLATFORM=y
-CONFIG_USB_DWC2_PCI=y
-# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2=m
+CONFIG_USB_DWC2_DUAL_ROLE=y
+CONFIG_USB_DWC2_PLATFORM=m
+CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_DWC3=m
-CONFIG_USB_DWC3_OMAP=m
+CONFIG_USB_DWC3_DUAL_ROLE=y
CONFIG_USB_DWC3_PCI=m
# CONFIG_USB_DWC3_DEBUG is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_QCOM is not set
# CONFIG_DWC3_HOST_USB3_LPM_ENABLE is not set
CONFIG_DW_WATCHDOG=m
CONFIG_PCIE_DW=y
# Sound
-CONFIG_SND_SOC=m
-CONFIG_SND_SPI=y
CONFIG_SND_ARM=y
-CONFIG_SND_ARMAACI=m
-CONFIG_SND_COMPRESS_OFFLOAD=m
-CONFIG_SND_DESIGNWARE_I2S=m
-CONFIG_SND_DMAENGINE_PCM=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SIMPLE_CARD=m
-CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_SND_SOC_DMIC=m
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_HDMI_CODEC=m
-CONFIG_SND_SOC_SPDIF=m
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8804 is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_SOC_ROCKCHIP is not set
+CONFIG_SND_SOC_AC97_BUS=y
# Displays
CONFIG_BACKLIGHT_TPS65217=m
@@ -722,6 +677,7 @@ CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_PWM=m
+CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_POWER_AVS=y
CONFIG_CHARGER_MANAGER=y
@@ -767,7 +723,7 @@ CONFIG_LCD_HX8357=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
@@ -780,6 +736,10 @@ CONFIG_LEDS_PWM=m
CONFIG_LEDS_SYSCON=y
CONFIG_BMP085_SPI=m
+CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_SYSCON=m
+CONFIG_POWER_RESET_SYSCON=y
+
CONFIG_SRAM=y
# Ethernet
@@ -824,6 +784,7 @@ CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_SND_SOC_TS3A227E=m
# Needs work/investigation
# CONFIG_ARM_KPROBES_TEST is not set
@@ -845,7 +806,6 @@ CONFIG_I2C_CROS_EC_TUNNEL=m
# CONFIG_EZX_PCAP is not set
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
@@ -854,6 +814,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=m
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_FB_XILINX is not set
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_SUNGEM is not set
@@ -889,3 +850,4 @@ CONFIG_I2C_CROS_EC_TUNNEL=m
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_CRYPTO_DEV_UX500_DEBUG is not set
# CONFIG_AB8500_DEBUG is not set
+# CONFIG_ARM_KERNMEM_PERMS is not set
diff --git a/config-armv7-lpae b/config-armv7-lpae
index b08f4da..c42b38c 100644
--- a/config-armv7-lpae
+++ b/config-armv7-lpae
@@ -1,6 +1,5 @@
# ARM A15 lpae unified arch kernel
CONFIG_ARCH_KEYSTONE=y
-CONFIG_ARCH_VIRT=y
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXC is not set
@@ -10,7 +9,6 @@ CONFIG_ARCH_VIRT=y
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
-# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_ARCH_AXXIA is not set
@@ -64,6 +62,8 @@ CONFIG_SPI_DAVINCI=m
CONFIG_TI_DAVINCI_MDIO=m
CONFIG_KEYSTONE_IRQ=m
CONFIG_PCI_KEYSTONE=y
+CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_GPIO_SYSCON=m
# Tegra (non A15 device options)
# CONFIG_ARCH_TEGRA_2x_SOC is not set
diff --git a/config-debug b/config-debug
index 467f33a..fcc5aac 100644
--- a/config-debug
+++ b/config-debug
@@ -35,6 +35,8 @@ CONFIG_ACPI_DEBUG=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_PI_LIST=y
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_OBJECTS=y
@@ -45,6 +47,7 @@ CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_X86_PTDUMP=y
+CONFIG_ARM64_PTDUMP=y
CONFIG_EFI_PGT_DUMP=y
CONFIG_CAN_DEBUG_DEVICES=y
@@ -97,6 +100,7 @@ CONFIG_QUOTA_DEBUG=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
+CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
diff --git a/config-generic b/config-generic
index 9cac4c4..3be461d 100644
--- a/config-generic
+++ b/config-generic
@@ -145,6 +145,7 @@ CONFIG_MMC_USHC=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_VUB300=m
+CONFIG_MMC_TOSHIBA_PCI=m
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
@@ -166,6 +167,7 @@ CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
@@ -504,6 +506,7 @@ CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_AM53C974=m
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -524,6 +527,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_NSP32 is not set
+CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_QLA_FC=m
@@ -561,7 +565,6 @@ CONFIG_SATA_NV=m
CONFIG_SATA_PMP=y
CONFIG_SATA_PROMISE=m
CONFIG_SATA_QSTOR=m
-# CONFIG_SATA_RCAR is not set
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
@@ -761,6 +764,7 @@ CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU=m
+CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
@@ -1027,6 +1031,9 @@ CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_REDIR_IPV4=m
+CONFIG_NFT_REDIR_IPV6=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
@@ -1204,6 +1211,7 @@ CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_VLAN=m
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
@@ -1246,6 +1254,7 @@ CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
@@ -1414,7 +1423,7 @@ CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_HWMON=y
CONFIG_I40E=m
-# CONFIG_I40E_VXLAN is not set
+CONFIG_I40E_VXLAN=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
CONFIG_I40EVF=m
@@ -1488,6 +1497,9 @@ CONFIG_SH_ETH=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_ROCKER=m
+
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
@@ -1560,8 +1572,6 @@ CONFIG_STE10XP=m
CONFIG_VITESSE_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_OMAP_CONTROL_PHY is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_MII=m
CONFIG_NET_CORE=y
@@ -1570,7 +1580,6 @@ CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_DNET=m
-
CONFIG_B44=m
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
@@ -1833,15 +1842,16 @@ CONFIG_MWIFIEX_USB=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IEEE802154_FAKELB=m
+CONFIG_IEEE802154_CC2520=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
-# CONFIG_IEEE802154_CC2520 is not set
CONFIG_MAC802154=m
CONFIG_NET_MPLS_GSO=m
+CONFIG_NET_SWITCHDEV=y
+
CONFIG_6LOWPAN=m
#
@@ -1951,6 +1961,8 @@ CONFIG_WINBOND_FIR=m
# Bluetooth support
#
CONFIG_BT=m
+CONFIG_BT_BREDR=y
+CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_SCO=y
CONFIG_BT_CMTP=m
@@ -2199,7 +2211,7 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_CAP1106 is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -2212,6 +2224,9 @@ CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_MOUSE_CYAPA=m
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_ELAN_I2C_I2C=y
+CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2254,6 +2269,7 @@ CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2462,6 +2478,8 @@ CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_STUB=m
+CONFIG_I2C_SLAVE=y
+CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_TINY_USB=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_VIA is not set
@@ -2544,6 +2562,7 @@ CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6683=m
+CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
@@ -2684,6 +2703,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# CONFIG_MAG3110 is not set
# CONFIG_TMP006 is not set
# CONFIG_MLX90614 is not set
+# CONFIG_BMP280 is not set
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_KXSD9 is not set
@@ -2722,6 +2742,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# CONFIG_MPL3115 is not set
# CONFIG_MPL115 is not set
# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
# CONFIG_AS3935 is not set
CONFIG_KXCJK1013=m
# CONFIG_ISL29125 is not set
@@ -2817,6 +2838,7 @@ CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
+CONFIG_IPMI_SSIF=m
CONFIG_IPMI_POWEROFF=m
#
@@ -2866,8 +2888,6 @@ CONFIG_WM831X_WATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_TPM=m
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_RTC_DEBUG is not set
@@ -2887,6 +2907,7 @@ CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_EP93XX is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_HYM8563 is not set
@@ -2989,6 +3010,7 @@ CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
@@ -3111,7 +3133,6 @@ CONFIG_VIDEO_TLG2300=m
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_VIVID is not set
-# CONFIG_EXYNOS_VIDEO is not set
CONFIG_VIDEO_USBTV=m
# CONFIG_VIDEO_AU0828_RC is not set
@@ -3171,6 +3192,7 @@ CONFIG_DVB_DM1105=m
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
+CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
@@ -3261,6 +3283,7 @@ CONFIG_IR_REDRAT3=m
CONFIG_IR_ENE=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
+CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_GPIO_CIR=m
@@ -3391,10 +3414,12 @@ CONFIG_SND=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_SEQUENCER=y
+CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_HRTIMER=y
+CONFIG_SND_JACK=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_OSSEMUL=y
@@ -3536,6 +3561,7 @@ CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
CONFIG_SND_DICE=m
+CONFIG_SND_OXFW=m
CONFIG_SND_FIREWORKS=m
# CONFIG_SND_BEBOB is not set
@@ -3633,6 +3659,7 @@ CONFIG_UHID=m
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
@@ -3648,6 +3675,7 @@ CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
+CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_DRAGONRISE=m
@@ -4041,7 +4069,9 @@ CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_WM831X_SPI is not set
@@ -4171,6 +4201,7 @@ CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
@@ -4580,6 +4611,19 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_INITRAMFS_SOURCE=""
+
+# These were all enabled by default before 3.19 made them individually
+# selectable. Possibly look at enabling only the one(s) Fedora actually
+# uses.
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+
+CONFIG_INIT_FALLBACK=y
+
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
@@ -4748,7 +4792,81 @@ CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
-# CONFIG_SND_SOC is not set
+
+CONFIG_SND_SOC=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_DESIGNWARE_I2S=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_DMIC=m
+CONFIG_SND_SOC_HDMI_CODEC=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_DMAENGINE_PCM=m
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271 is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM1792A is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804 is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_IMX_ES8328 is not set
+# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
+# CONFIG_SND_EDMA_SOC is not set
+# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TS3A227E is not set
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
@@ -4768,6 +4886,7 @@ CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_TRIGGERS=y
@@ -4965,17 +5084,18 @@ CONFIG_GPIOLIB=y
# CONFIG_PINCONF is not set
CONFIG_NET_DSA=m
+CONFIG_NET_DSA_HWMON=y
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6131=m
CONFIG_NET_DSA_MV88E6123_61_65=m
CONFIG_NET_DSA_MV88E6171=m
+CONFIG_NET_DSA_MV88E6352=m
CONFIG_NET_DSA_BCM_SF2=m
# Used by Maemo, we don't care.
# CONFIG_PHONET is not set
# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
# CONFIG_C2PORT is not set
@@ -5004,6 +5124,7 @@ CONFIG_STAGING=y
# CONFIG_ANDROID is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
+# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_TI_ST is not set
@@ -5062,6 +5183,10 @@ CONFIG_USBIP_HOST=m
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_MEDIA_TUNER_MSI001 is not set
+# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_DVB_MN88472 is not set
+# CONFIG_DVB_MN88473 is not set
# END OF STAGING
#
diff --git a/config-nodebug b/config-nodebug
index ed69133..01008d6 100644
--- a/config-nodebug
+++ b/config-nodebug
@@ -35,6 +35,8 @@ CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
@@ -44,7 +46,8 @@ CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-# CONFIG_X86_PTDUMP is not set
+CONFIG_X86_PTDUMP=y
+# CONFIG_ARM64_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
@@ -96,6 +99,7 @@ CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_KGDB_KDB=y
+CONFIG_KDB_DEFAULT_ENABLE=0x0
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
diff --git a/config-powerpc-generic b/config-powerpc-generic
index ce4da57..e3dbc6a 100644
--- a/config-powerpc-generic
+++ b/config-powerpc-generic
@@ -49,6 +49,7 @@ CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
+# CONFIG_SND_SOC is not set
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
@@ -306,6 +307,7 @@ CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_RTC_DRV_MPC5121 is not set
@@ -330,6 +332,7 @@ CONFIG_I2C_MPC=m
# CONFIG_NET_VENDOR_TOSHIBA is not set
# CONFIG_CPU_IDLE is not set
+# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_SELFTEST is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_INPUT_GP2A is not set
diff --git a/config-powerpc64 b/config-powerpc64
index c9bc2ee..5d9d29b 100644
--- a/config-powerpc64
+++ b/config-powerpc64
@@ -15,6 +15,7 @@ CONFIG_PPC_POWERNV_RTAS=y
CONFIG_SENSORS_IBMPOWERNV=y
CONFIG_HW_RANDOM_POWERNV=m
CONFIG_POWERNV_CPUFREQ=m
+CONFIG_IPMI_POWERNV=m
CONFIG_SCOM_DEBUGFS=y
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
@@ -165,6 +166,9 @@ CONFIG_HW_RANDOM_AMD=m
CONFIG_UIO_PDRV=m
+CONFIG_I2C_OPAL=m
+CONFIG_RTC_DRV_OPAL=m
+
CONFIG_HW_RANDOM_PSERIES=m
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_842=m
@@ -176,8 +180,8 @@ CONFIG_CXL=m
# CONFIG_PPC_ICSWX_PID is not set
# CONFIG_PPC_ICSWX_USE_SIGILL is not set
# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PPC_TRANSACTIONAL_MEM is not set
# CONFIG_SND_HDA_INTEL is not set
CONFIG_BLK_DEV_RSXX=m
-CONFIG_PPC_TRANSACTIONAL_MEM=y
# CONFIG_CARL9170 is not set
diff --git a/config-powerpc64p7 b/config-powerpc64p7
index dfff59c..eabb28c 100644
--- a/config-powerpc64p7
+++ b/config-powerpc64p7
@@ -10,6 +10,7 @@ CONFIG_PPC_POWERNV_RTAS=y
CONFIG_HW_RANDOM_POWERNV=m
CONFIG_SENSORS_IBMPOWERNV=y
CONFIG_POWERNV_CPUFREQ=m
+CONFIG_IPMI_POWERNV=m
CONFIG_SCOM_DEBUGFS=y
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
@@ -155,6 +156,9 @@ CONFIG_HW_RANDOM_AMD=m
CONFIG_UIO_PDRV=m
+CONFIG_I2C_OPAL=m
+CONFIG_RTC_DRV_OPAL=m
+
CONFIG_HW_RANDOM_PSERIES=m
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_842=m
@@ -168,4 +172,3 @@ CONFIG_CXL=m
# CONFIG_PCIEPORTBUS is not set
# CONFIG_SND_HDA_INTEL is not set
CONFIG_BLK_DEV_RSXX=m
-CONFIG_PPC_TRANSACTIONAL_MEM=y
diff --git a/config-s390x b/config-s390x
index 9534f51..5f35e49 100644
--- a/config-s390x
+++ b/config-s390x
@@ -63,6 +63,7 @@ CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_VT220_CONSOLE=y
CONFIG_SCLP_CPI=m
CONFIG_SCLP_ASYNC=m
+CONFIG_SCLP_ASYNC_ID="000000000"
CONFIG_S390_TAPE=m
CONFIG_S390_TAPE_3590=m
@@ -150,8 +151,6 @@ CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_CLAW is not set
-# CONFIG_ATMEL is not set
-
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MII is not set
diff --git a/config-x86-32-generic b/config-x86-32-generic
index 5daa9b8..bdf1b75 100644
--- a/config-x86-32-generic
+++ b/config-x86-32-generic
@@ -197,6 +197,7 @@ CONFIG_BACKLIGHT_PWM=m
# CONFIG_EDAC_SBRIDGE is not set
+# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_SELFTEST is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_INPUT_GP2A is not set
@@ -206,6 +207,7 @@ CONFIG_BACKLIGHT_PWM=m
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_GPIO_SODAVILLE is not set
+# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_MLX5_INFINIBAND is not set
diff --git a/config-x86-generic b/config-x86-generic
index f3700a2..a473db3 100644
--- a/config-x86-generic
+++ b/config-x86-generic
@@ -34,6 +34,10 @@ CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_X86_PM_TIMER=y
+# This requires changes to binutils and the compiler. Plus you can't actually
+# buy hardware with MPX yet. So... leave it off until all of that seems set.
+# CONFIG_X86_INTEL_MPX is not set
+
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
@@ -99,6 +103,8 @@ CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_EXTLOG is not set
+# CONFIG_PMIC_OPREGION is not set
+
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
@@ -166,6 +172,8 @@ CONFIG_DCDBAS=m
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=m
+# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
+CONFIG_EDAC_AMD64=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_AMD8111=m
CONFIG_EDAC_AMD8131=m
@@ -327,6 +335,7 @@ CONFIG_INTEL_IOATDMA=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_I5500=m
# CONFIG_CPA_DEBUG is not set
@@ -488,12 +497,28 @@ CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PINCTRL=y
CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_PINCTRL_CHERRYVIEW=m
+
+#baytrail/cherrytrail stuff
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_SOC_BUTTON_ARRAY=m
+CONFIG_SND_SOC_INTEL_SST=m
+CONFIG_SND_SOC_INTEL_SST_ACPI=m
+CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
+CONFIG_SND_SOC_INTEL_BAYTRAIL=m
+CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m
+CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
+CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
+
+
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_THERMAL=m
-CONFIG_INTEL_RAPL=m
CONFIG_INT340X_THERMAL=m
+CONFIG_INTEL_RAPL=m
CONFIG_VMWARE_VMCI=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
diff --git a/config-x86_64-generic b/config-x86_64-generic
index 89b7070..3a2ef08 100644
--- a/config-x86_64-generic
+++ b/config-x86_64-generic
@@ -177,6 +177,8 @@ CONFIG_SFC_MTD=y
# Override MTD stuff because SFC_MTD needs it
CONFIG_MTD_BLOCK=m
+CONFIG_HSA_AMD=m
+
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL_ALL is not set
diff --git a/drm-i915-hush-check-crtc-state.patch b/drm-i915-hush-check-crtc-state.patch
new file mode 100644
index 0000000..6e25762
--- /dev/null
+++ b/drm-i915-hush-check-crtc-state.patch
@@ -0,0 +1,31 @@
+From: Adam Jackson <ajax at redhat.com>
+Date: Wed, 13 Nov 2013 10:17:24 -0500
+Subject: [PATCH] drm/i915: hush check crtc state
+
+This is _by far_ the most common backtrace for i915 on retrace.fp.o, and
+it's mostly useless noise. There's not enough context when it's generated
+to know if something actually went wrong. Downgrade the message to
+KMS debugging so we can still get it if we want it.
+
+Bugzilla: 1027037 1028785
+Upstream-status: http://lists.freedesktop.org/archives/intel-gfx/2013-November/035948.html
+---
+ drivers/gpu/drm/i915/intel_display.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
+index 76cd2205bc9c..b1285eec32ba 100644
+--- a/drivers/gpu/drm/i915/intel_display.c
++++ b/drivers/gpu/drm/i915/intel_display.c
+@@ -10869,7 +10869,7 @@ check_crtc_state(struct drm_device *dev)
+
+ if (active &&
+ !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
+- I915_STATE_WARN(1, "pipe state doesn't match!\n");
++ DRM_DEBUG_KMS("pipe state doesn't match!\n");
+ intel_dump_pipe_config(crtc, &pipe_config,
+ "[hw state]");
+ intel_dump_pipe_config(crtc, &crtc->config,
+--
+2.1.0
+
diff --git a/drm-i915-tame-the-chattermouth-v2.patch b/drm-i915-tame-the-chattermouth-v2.patch
index 18a1b1b..125a738 100644
--- a/drm-i915-tame-the-chattermouth-v2.patch
+++ b/drm-i915-tame-the-chattermouth-v2.patch
@@ -20,21 +20,20 @@ v2: paint the macro names blue, clarify that the default behavior
Signed-off-by: Rob Clark <robdclark at gmail.com>
Acked-by: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
-Backported-by: Josh Boyer <jwboyer at fedoraproject.org>
---
drivers/gpu/drm/i915/i915_drv.h | 30 ++++++++
drivers/gpu/drm/i915/i915_params.c | 5 ++
- drivers/gpu/drm/i915/intel_display.c | 132 +++++++++++++++++------------------
- drivers/gpu/drm/i915/intel_dp.c | 2 +-
- 4 files changed, 102 insertions(+), 67 deletions(-)
+ drivers/gpu/drm/i915/intel_display.c | 134 +++++++++++++++++------------------
+ drivers/gpu/drm/i915/intel_dp.c | 4 +-
+ 4 files changed, 104 insertions(+), 69 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
-index 346aee828dc3..8ac3d534434e 100644
+index 9d7a7155bf02..d04ed2b2728e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
-@@ -57,6 +57,35 @@
- #define DRIVER_DESC "Intel Graphics"
- #define DRIVER_DATE "20140905"
+@@ -60,6 +60,35 @@
+ #undef WARN_ON
+ #define WARN_ON(x) WARN(x, "WARN_ON(" #x ")")
+/* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and
+ * WARN_ON()) for hw state sanity checks to check for unexpected conditions
@@ -68,7 +67,7 @@ index 346aee828dc3..8ac3d534434e 100644
enum pipe {
INVALID_PIPE = -1,
PIPE_A = 0,
-@@ -2222,6 +2251,7 @@ struct i915_params {
+@@ -2309,6 +2338,7 @@ struct i915_params {
bool disable_vtd_wa;
int use_mmio_flip;
bool mmio_debug;
@@ -97,10 +96,10 @@ index c91cb2033cc5..db07153b693f 100644
+MODULE_PARM_DESC(verbose_state_checks,
+ "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
-index cadc3bcf1de2..752dbe7ff017 100644
+index e7a16f119a29..76cd2205bc9c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
-@@ -1060,7 +1060,7 @@ void assert_pll(struct drm_i915_private *dev_priv,
+@@ -1024,7 +1024,7 @@ void assert_pll(struct drm_i915_private *dev_priv,
reg = DPLL(pipe);
val = I915_READ(reg);
cur_state = !!(val & DPLL_VCO_ENABLE);
@@ -109,7 +108,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
-@@ -1076,7 +1076,7 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
+@@ -1040,7 +1040,7 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
mutex_unlock(&dev_priv->dpio_lock);
cur_state = val & DSI_PLL_VCO_EN;
@@ -118,7 +117,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"DSI PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
-@@ -1107,7 +1107,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
+@@ -1071,7 +1071,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
return;
cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
@@ -127,7 +126,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"%s assertion failure (expected %s, current %s)\n",
pll->name, state_string(state), state_string(cur_state));
}
-@@ -1131,7 +1131,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
+@@ -1095,7 +1095,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
val = I915_READ(reg);
cur_state = !!(val & FDI_TX_ENABLE);
}
@@ -136,7 +135,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"FDI TX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
-@@ -1148,7 +1148,7 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
+@@ -1112,7 +1112,7 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_ENABLE);
@@ -145,7 +144,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"FDI RX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
-@@ -1171,7 +1171,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+@@ -1135,7 +1135,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
@@ -154,7 +153,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
}
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
-@@ -1184,7 +1184,7 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+@@ -1148,7 +1148,7 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_PLL_ENABLE);
@@ -163,7 +162,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"FDI RX PLL assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
-@@ -1226,7 +1226,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
+@@ -1190,7 +1190,7 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
locked = false;
@@ -172,7 +171,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"panel assertion failure, pipe %c regs locked\n",
pipe_name(pipe));
}
-@@ -1242,7 +1242,7 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
+@@ -1206,7 +1206,7 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
else
cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
@@ -181,7 +180,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"cursor on pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
-@@ -1272,7 +1272,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
+@@ -1236,7 +1236,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
cur_state = !!(val & PIPECONF_ENABLE);
}
@@ -190,7 +189,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
-@@ -1287,7 +1287,7 @@ static void assert_plane(struct drm_i915_private *dev_priv,
+@@ -1251,7 +1251,7 @@ static void assert_plane(struct drm_i915_private *dev_priv,
reg = DSPCNTR(plane);
val = I915_READ(reg);
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
@@ -199,7 +198,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"plane %c assertion failure (expected %s, current %s)\n",
plane_name(plane), state_string(state), state_string(cur_state));
}
-@@ -1307,7 +1307,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+@@ -1271,7 +1271,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
if (INTEL_INFO(dev)->gen >= 4) {
reg = DSPCNTR(pipe);
val = I915_READ(reg);
@@ -208,7 +207,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"plane %c assertion failure, should be disabled but not\n",
plane_name(pipe));
return;
-@@ -1319,7 +1319,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+@@ -1283,7 +1283,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
val = I915_READ(reg);
cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
DISPPLANE_SEL_PIPE_SHIFT;
@@ -217,7 +216,16 @@ index cadc3bcf1de2..752dbe7ff017 100644
"plane %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(i), pipe_name(pipe));
}
-@@ -1336,20 +1336,20 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+@@ -1299,7 +1299,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+ if (INTEL_INFO(dev)->gen >= 9) {
+ for_each_sprite(pipe, sprite) {
+ val = I915_READ(PLANE_CTL(pipe, sprite));
+- WARN(val & PLANE_CTL_ENABLE,
++ I915_STATE_WARN(val & PLANE_CTL_ENABLE,
+ "plane %d assertion failure, should be off on pipe %c but is still active\n",
+ sprite, pipe_name(pipe));
+ }
+@@ -1307,20 +1307,20 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
for_each_sprite(pipe, sprite) {
reg = SPCNTR(pipe, sprite);
val = I915_READ(reg);
@@ -241,7 +249,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
}
-@@ -1357,7 +1357,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+@@ -1328,7 +1328,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
static void assert_vblank_disabled(struct drm_crtc *crtc)
{
@@ -250,7 +258,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
drm_crtc_vblank_put(crtc);
}
-@@ -1366,12 +1366,12 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
+@@ -1337,12 +1337,12 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
u32 val;
bool enabled;
@@ -265,7 +273,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
}
static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
-@@ -1384,7 +1384,7 @@ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+@@ -1355,7 +1355,7 @@ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
enabled = !!(val & TRANS_ENABLE);
@@ -274,7 +282,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"transcoder assertion failed, should be off on pipe %c but is still active\n",
pipe_name(pipe));
}
-@@ -1464,11 +1464,11 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
+@@ -1435,11 +1435,11 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
@@ -288,7 +296,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
&& (val & DP_PIPEB_SELECT),
"IBX PCH dp port still using transcoder B\n");
}
-@@ -1477,11 +1477,11 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
+@@ -1448,11 +1448,11 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
@@ -302,7 +310,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
&& (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
-@@ -1498,13 +1498,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
+@@ -1469,13 +1469,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
@@ -318,7 +326,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
-@@ -5152,25 +5152,25 @@ static void intel_connector_check_state(struct intel_connector *connector)
+@@ -5382,25 +5382,25 @@ static void intel_connector_check_state(struct intel_connector *connector)
if (connector->mst_port)
return;
@@ -352,7 +360,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"encoder active on the wrong pipe\n");
}
}
-@@ -7523,24 +7523,24 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
+@@ -7810,24 +7810,24 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
struct intel_crtc *crtc;
for_each_intel_crtc(dev, crtc)
@@ -388,7 +396,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
/*
* In theory we can still leave IRQs enabled, as long as only the HPD
-@@ -7548,7 +7548,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
+@@ -7835,7 +7835,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
* gen-specific and since we only disable LCPLL after we fully disable
* the interrupts, the check below should be enough.
*/
@@ -397,7 +405,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
}
static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
-@@ -10838,7 +10838,7 @@ check_connector_state(struct drm_device *dev)
+@@ -10742,7 +10742,7 @@ check_connector_state(struct drm_device *dev)
* ->get_hw_state callbacks. */
intel_connector_check_state(connector);
@@ -406,7 +414,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"connector's staged encoder doesn't match current encoder\n");
}
}
-@@ -10858,9 +10858,9 @@ check_encoder_state(struct drm_device *dev)
+@@ -10762,9 +10762,9 @@ check_encoder_state(struct drm_device *dev)
encoder->base.base.id,
encoder->base.name);
@@ -418,7 +426,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"encoder's active_connectors set, but no crtc\n");
list_for_each_entry(connector, &dev->mode_config.connector_list,
-@@ -10879,19 +10879,19 @@ check_encoder_state(struct drm_device *dev)
+@@ -10783,19 +10783,19 @@ check_encoder_state(struct drm_device *dev)
if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
continue;
@@ -442,7 +450,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"encoder's hw state doesn't match sw tracking "
"(expected %i, found %i)\n",
encoder->connectors_active, active);
-@@ -10900,7 +10900,7 @@ check_encoder_state(struct drm_device *dev)
+@@ -10804,7 +10804,7 @@ check_encoder_state(struct drm_device *dev)
continue;
tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
@@ -451,7 +459,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"active encoder's pipe doesn't match"
"(expected %i, found %i)\n",
tracked_pipe, pipe);
-@@ -10925,7 +10925,7 @@ check_crtc_state(struct drm_device *dev)
+@@ -10829,7 +10829,7 @@ check_crtc_state(struct drm_device *dev)
DRM_DEBUG_KMS("[CRTC:%d]\n",
crtc->base.base.id);
@@ -460,7 +468,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"active crtc, but not enabled in sw tracking\n");
for_each_intel_encoder(dev, encoder) {
-@@ -10936,10 +10936,10 @@ check_crtc_state(struct drm_device *dev)
+@@ -10840,10 +10840,10 @@ check_crtc_state(struct drm_device *dev)
active = true;
}
@@ -473,7 +481,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled, crtc->base.enabled);
-@@ -10959,13 +10959,13 @@ check_crtc_state(struct drm_device *dev)
+@@ -10863,13 +10863,13 @@ check_crtc_state(struct drm_device *dev)
encoder->get_config(encoder, &pipe_config);
}
@@ -489,14 +497,14 @@ index cadc3bcf1de2..752dbe7ff017 100644
intel_dump_pipe_config(crtc, &pipe_config,
"[hw state]");
intel_dump_pipe_config(crtc, &crtc->config,
-@@ -10993,14 +10993,14 @@ check_shared_dpll_state(struct drm_device *dev)
+@@ -10897,14 +10897,14 @@ check_shared_dpll_state(struct drm_device *dev)
active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
-- WARN(pll->active > pll->refcount,
-+ I915_STATE_WARN(pll->active > pll->refcount,
+- WARN(pll->active > hweight32(pll->config.crtc_mask),
++ I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
"more active pll users than references: %i vs %i\n",
- pll->active, pll->refcount);
+ pll->active, hweight32(pll->config.crtc_mask));
- WARN(pll->active && !pll->on,
+ I915_STATE_WARN(pll->active && !pll->on,
"pll in active use but not on in sw tracking\n");
@@ -508,7 +516,7 @@ index cadc3bcf1de2..752dbe7ff017 100644
"pll on state mismatch (expected %i, found %i)\n",
pll->on, active);
-@@ -11010,14 +11010,14 @@ check_shared_dpll_state(struct drm_device *dev)
+@@ -10914,14 +10914,14 @@ check_shared_dpll_state(struct drm_device *dev)
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
active_crtcs++;
}
@@ -516,29 +524,38 @@ index cadc3bcf1de2..752dbe7ff017 100644
+ I915_STATE_WARN(pll->active != active_crtcs,
"pll active crtcs mismatch (expected %i, found %i)\n",
pll->active, active_crtcs);
-- WARN(pll->refcount != enabled_crtcs,
-+ I915_STATE_WARN(pll->refcount != enabled_crtcs,
+- WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
++ I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
"pll enabled crtcs mismatch (expected %i, found %i)\n",
- pll->refcount, enabled_crtcs);
+ hweight32(pll->config.crtc_mask), enabled_crtcs);
-- WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
-+ I915_STATE_WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
+- WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
++ I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
sizeof(dpll_hw_state)),
"pll hw state mismatch\n");
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
-index 4bcd91757321..4b5d6c5ee544 100644
+index 5cecc20efa71..841e3d0b223d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
-@@ -1501,7 +1501,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+@@ -1558,7 +1558,7 @@ void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
+ vdd = edp_panel_vdd_on(intel_dp);
+ pps_unlock(intel_dp);
+
+- WARN(!vdd, "eDP port %c VDD already requested on\n",
++ I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n",
+ port_name(dp_to_dig_port(intel_dp)->port));
+ }
+
+@@ -1642,7 +1642,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
if (!is_edp(intel_dp))
return;
-- WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
-+ I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
+- WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
++ I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
+ port_name(dp_to_dig_port(intel_dp)->port));
intel_dp->want_panel_vdd = false;
-
--
2.1.0
diff --git a/hibernate-Disable-in-a-signed-modules-environment.patch b/hibernate-Disable-in-a-signed-modules-environment.patch
index fa1d53a..f1cc679 100644
--- a/hibernate-Disable-in-a-signed-modules-environment.patch
+++ b/hibernate-Disable-in-a-signed-modules-environment.patch
@@ -13,18 +13,18 @@ Signed-off-by: Josh Boyer <jwboyer at fedoraproject.org>
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
-index 1f35a3478f3c..5e2472fc3dda 100644
+index 2329daae5255..48a8e82c7e2e 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
-@@ -28,6 +28,7 @@
- #include <linux/syscore_ops.h>
+@@ -29,6 +29,7 @@
#include <linux/ctype.h>
#include <linux/genhd.h>
+ #include <linux/ktime.h>
+#include <linux/module.h>
#include <trace/events/power.h>
#include "power.h"
-@@ -65,7 +66,7 @@ static const struct platform_hibernation_ops *hibernation_ops;
+@@ -66,7 +67,7 @@ static const struct platform_hibernation_ops *hibernation_ops;
bool hibernation_available(void)
{
diff --git a/i8042-Add-notimeout-quirk-for-Fujitsu-Lifebook-A544-.patch b/i8042-Add-notimeout-quirk-for-Fujitsu-Lifebook-A544-.patch
new file mode 100644
index 0000000..d6c4f1b
--- /dev/null
+++ b/i8042-Add-notimeout-quirk-for-Fujitsu-Lifebook-A544-.patch
@@ -0,0 +1,45 @@
+From: Hans de Goede <hdegoede at redhat.com>
+Date: Fri, 24 Oct 2014 11:30:19 +0200
+Subject: [PATCH] i8042: Add notimeout quirk for Fujitsu Lifebook A544 and
+ Lifebook AH544
+
+These models need i8042.notimeout, otherwise the touchpad will not work.
+
+BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731
+BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138
+Cc: stable at vger.kernel.org
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ drivers/input/serio/i8042-x86ia64io.h | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
+index a0bcbb64d06d..aa9b299f4e26 100644
+--- a/drivers/input/serio/i8042-x86ia64io.h
++++ b/drivers/input/serio/i8042-x86ia64io.h
+@@ -364,6 +364,22 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
+ },
+ },
+ {
++ /* Fujitsu A544 laptop */
++ /* https://bugzilla.redhat.com/show_bug.cgi?id=1111138 */
++ .matches = {
++ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
++ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK A544"),
++ },
++ },
++ {
++ /* Fujitsu AH544 laptop */
++ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
++ .matches = {
++ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
++ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"),
++ },
++ },
++ {
+ /* Fujitsu U574 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+--
+1.9.3
+
diff --git a/kernel-arm64.patch b/kernel-arm64.patch
index e675c7b..df9c19d 100644
--- a/kernel-arm64.patch
+++ b/kernel-arm64.patch
@@ -1,1920 +1,59 @@
-commit 0335b5034b998e978bf9343da77246bcbad33981
-Author: Mark Salter <msalter at redhat.com>
-Date: Wed Nov 19 10:32:11 2014 -0500
-
- arm64: explicitly set noncoherent ops for _CCA handling
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 4a2d43442e20a24b78594d12914706deddc119de
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 17:09:29 2014 -0500
-
- DO NOT UPSTREAM - pci/xgene: Provide fixup for ACPI MCFG support
-
- Xgene doesn't decode bus bits of mmconfig region and only
- supports devfn 0 of bus 0. For other buses/devices, some
- internal registers need to be poked. This patch provides
- a fixup to support ACPI MCFG tables. This is a horrible
- hack allowing the hardware to be used for PCI testing, but
- it is not intended to be a long term patch.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit b93f804830d9ef6d572dd6be9734108199141b87
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 17:33:18 2014 -0500
-
- DO NOT UPSTREAM - provide hook for MCFG fixups
-
- This is a temprary mechanism needed by at least one early
- arm64 hardware platform with broken MCFG support. This is
- not intended for upstream and will go away as soon as newer
- hardware with fully compliant ECAM becomes available.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 2d76cb937a6c0010d1de181d0142f0822df5071d
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 17:30:25 2014 -0500
-
- arm64/pci/acpi: initial support for ACPI probing of PCI
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit a438ff7be0140738b1224d5ade6345a9febad279
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 17:23:57 2014 -0500
-
- arm64/acpi/pci: add support for parsing MCFG table
-
- Add support for parsing MCFG table and provide functions to read/write
- PCI configuration space based on the parsed info. This provides the
- low-level raw_pci_read/raw_pci_write functionality.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 814b22167d35b18fc3de745277a2190ff0841585
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 16:42:14 2014 -0500
-
- DO NOT UPSTREAM - pci/xgene: workaround CRS issue
-
- CRS is not behaving properly for some reason. Until this
- gets diagnosed properly, pretend not to support it in order
- to prevent hangs in 3.18 kernel.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit b90d000000801b473ed4c69757d3be9e433b6c5e
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 16:31:05 2014 -0500
-
- iommu/arm-smmu: fix NULL dereference with ACPI PCI devices
-
- Fix a NULL dereference in find_mmu_master which occurs when
- booting with ACPI. In that case, PCI bridges with not have
- an of_node. Add a check for NULL of_node and bail out if that
- is the case.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 243e5c1dc198958ce862e39d33efc798a47b339a
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Nov 10 21:35:11 2014 -0500
-
- DO NOT UPSTREAM - arm64: fix dma_ops for ACPI and PCI devices
-
- Commit 2189064795dc3fb4101e5:
-
- arm64: Implement set_arch_dma_coherent_ops() to replace bus notifiers
-
- removed the bus notifiers from dma-mapping.c. This patch
- adds the notifier back for ACPI and PCI devices until a
- better permanent solution is worked out.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 612eea3ae291b28f7ed50ccf50bd1685a2a7f753
-Author: Mark Salter <msalter at redhat.com>
-Date: Thu Aug 14 12:32:13 2014 -0400
-
- acpi: add utility to test for device dma coherency
-
- ACPI 5.1 adds a _CCA object to indicate memory coherency
- of a bus master device. It is an integer with zero meaning
- non-coherent and one meaning coherent. This attribute may
- be inherited from a parent device. It may also be missing
- entirely, in which case, an architecture-specific default
- is assumed.
-
- This patch adds a utility function to parse a device handle
- (and its parents) for a _CCA object and return the coherency
- attribute if found.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 3d509a508c6fd70eb0fb2f0e82d08d92cc96568c
-Author: Mark Salter <msalter at redhat.com>
-Date: Sat Nov 22 12:08:53 2014 -0500
-
- DO NOT UPSTREAM - arm64: kvm: Change vgic resource size error to info
-
- From: Donald Dutile <ddutile at redhat.com>
-
- A new check was added to upstream to ensure a full
- kernel page was allocated to the vgic. The check failed
- kvm configuration if the condition wasn't met. An arm64
- kernel with 64K pagesize and certain early firmware will
- fail this test. Change error to info & continue configuration
- for now.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 2b5dd4609e947b418afbbeae95da7f34594bc048
-Author: Wei Huang <wei at redhat.com>
-Date: Sat Nov 22 10:38:45 2014 -0500
-
- KVM/ACPI: Enable ACPI support for KVM virt GIC
-
- This patches enables ACPI support for KVM virtual GIC. KVM parses
- ACPI table for virt GIC related information when DT table is not
- present. This is done by retrieving the information defined in
- generic_interrupt entry of MADT table.
-
- Note: Alexander Spyridakis from Virtual Open System posts a
- _very_ similar patch to enable acpi-kvm. This patch borrows some
- ideas from his patch.
-
- Signed-off-by: Wei Huang <wei at redhat.com>
- [combined with subsequent patch to use acpi_disabled]
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 756fc31666a4a3094727da5274fc0705a05f13a3
-Author: Wei Huang <wei at redhat.com>
-Date: Sat Nov 22 10:18:57 2014 -0500
-
- KVM/ACPI: Enable ACPI support for virt arch timer
-
- This patches enables ACPI support for KVM virtual arch_timer. It
- allows KVM to parse ACPI table for virt arch_timer PPI when DT table
- is not present. This is done by retrieving the information from
- arch_timer_ppi array in arm_arch_timer driver.
-
- Signed-off-by: Wei Huang <wei at redhat.com>
- [combined with subsequent patch to use acpi_disabled]
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit b189108603f6db4a11e0c30050e840e8bb36f098
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Tue Nov 18 21:52:34 2014 +0100
-
- arm, arm64: KVM: handle potential incoherency of readonly memslots
-
- Upstream posting:
- http://thread.gmane.org/gmane.comp.emulators.kvm.devel/129475/focus=129477
-
- Readonly memslots are often used to implement emulation of ROMs and
- NOR flashes, in which case the guest may legally map these regions as
- uncached.
- To deal with the incoherency associated with uncached guest mappings,
- treat all readonly memslots as incoherent, and ensure that pages that
- belong to regions tagged as such are flushed to DRAM before being passed
- to the guest.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
- Acadia backport notes:
-
- - we have a few more conflicts here. The main thing is that our
- kvm_arch_prepare_memory_region() is "empty" at the moment; in upstream
- Ard introduced performance related, host device related code there, in
- commit 8eef91239.
-
- What we certainly need to grab from commit 8eef91239 is the acquiring of
- "kvm->mmu_lock" (which is visible in the upstream patch context too),
- and the filtering against
-
- (change != KVM_MR_CREATE && change != KVM_MR_MOVE)
-
- near the top of the function (which is not visible in the upstream patch
- context). (If (change == KVM_MR_DELETE), then the caller has set up
- "memslot" in such a way that calling stage2_flush_memslot() on it is
- invalid, and it would actually crash the host -- speaking from
- experience. :))
-
- - The hunk that seems to matter in practice, in my testing on Mustang, is
- the "fault_ipa_uncached" assignment one (which affects the the
- demand-paged case, ie. the coherent_cache_guest_page() function,
- modified in the previous patch).
-
- The kvm_arch_prepare_memory_region() hunk exists for completeness of
- implementation, and while it could certainly make a difference, I've
- never seen it make one, in my testing. We should pick it up nonetheless.
-
- Signed-off-by: Laszlo Ersek <lersek at redhat.com>
-
-commit 8ab19d68b49c2f6a9f0e6226c51bf9b2fe553022
-Author: Laszlo Ersek <lersek at redhat.com>
-Date: Tue Nov 18 21:52:33 2014 +0100
-
- arm, arm64: KVM: allow forced dcache flush on page faults
-
- Upstream posting:
- http://thread.gmane.org/gmane.comp.emulators.kvm.devel/129475/focus=129476
-
- From: Laszlo Ersek <lersek at redhat.com>
-
- To allow handling of incoherent memslots in a subsequent patch, this
- patch adds a paramater 'ipa_uncached' to cache_coherent_guest_page()
- so that we can instruct it to flush the page's contents to DRAM even
- if the guest has caching globally enabled.
-
- Signed-off-by: Laszlo Ersek <lersek at redhat.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
- Acadia backport notes:
- - minimal context conflict in user_mem_abort(): upstream passes
-
- pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE)
-
- as last parameter of stage2_set_pte(), while we do a direct comparison.
-
- (See upstream commit 3d08c629, "arm: kvm: STRICT_MM_TYPECHECKS fix for
- user_mem_abort".)
-
- Signed-off-by: Laszlo Ersek <lersek at redhat.com>
-
-commit 1ac87393dff5d6fb10edfba84dfff89f57a7224a
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Tue Nov 18 21:52:32 2014 +0100
-
- kvm: add a memslot flag for incoherent memory regions
-
- Upstream posting:
- http://thread.gmane.org/gmane.comp.emulators.kvm.devel/129475
-
- Memory regions may be incoherent with the caches, typically when the
- guest has mapped a host system RAM backed memory region as uncached.
- Add a flag KVM_MEMSLOT_INCOHERENT so that we can tag these memslots
- and handle them appropriately when mapping them.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Signed-off-by: Laszlo Ersek <lersek at redhat.com>
-
-commit 2a0a5cbf98c94e2906d9a357a63fbbb153488e1c
-Author: Tom Lendacky <thomas.lendacky at amd.com>
-Date: Mon Sep 15 17:02:52 2014 -0600
-
- amd-xgbe: AMD 10GbE driver APCI support for A0
-
- This patch provides ACPI support for the AMD 10GbE device driver
- and AMD 10GbE phy driver.
-
- Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
-
-commit 807e95abb96e7868e1c8e863a92298937a69d437
-Author: Mark Salter <msalter at redhat.com>
-Date: Tue Oct 7 12:54:08 2014 -0400
-
- xgene acpi network - first cut
-
-commit bdecd2af5d4234ed50042ab28a21736edcec6d41
-Author: Geert Uytterhoeven <geert+renesas at glider.be>
-Date: Thu Nov 6 12:23:23 2014 +0100
-
- leds: leds-gpio: Fix legacy GPIO number case
-
- In the legacy case, led_dat->gpiod is initialized correctly, but
- overwritten later by template->gpiod, which is NULL, causing leds-gpio
- to fail with:
-
- gpiod_direction_output: invalid GPIO
- leds-gpio: probe of leds-gpio failed with error -22
-
- Move the initialization of led_dat->gpiod from template->gpiod up, and
- always use led_dat->gpiod later, to fix this.
-
- Fixes: 5c51277a9ababfa4 (leds: leds-gpio: Add support for GPIO descriptors)
- Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
- Reviewed-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 42b0d1b64cdf1c8d37e69ff7cff45852f7a16f65
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Wed Nov 5 00:29:07 2014 +0100
-
- ACPI / property: Drop size_prop from acpi_dev_get_property_reference()
-
- The size_prop argument of the recently added function
- acpi_dev_get_property_reference() is not used by the only current
- caller of that function and is very unlikely to be used at any time
- going forward.
-
- Namely, for a property whose value is a list of items each containing
- a references to a device object possibly accompanied by some integers,
- the number of items in the list can always be computed as the number
- of elements of type ACPI_TYPE_LOCAL_REFERENCE in the property package.
- Thus it should never be necessary to provide an additional "cells"
- property with a value equal to the number of items in that list. It
- also should never be necessary to provide a "cells" property specifying
- how many integers are supposed to be following each reference.
-
- For this reason, drop the size_prop argument from
- acpi_dev_get_property_reference() and update its caller accordingly.
-
- Link: http://marc.info/?l=linux-kernel&m=141511255610556&w=2
- Suggested-by: Grant Likely <grant.likely at linaro.org>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Acked-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Tested-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit c3f29cda7420da6a721d40d116f369cfc1533d38
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Fri Oct 31 13:40:58 2014 +0200
-
- leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors
-
- Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO
- descriptors") already converted most of the driver to use GPIO descriptors.
- What is still missing is the platform specific hook gpio_blink_set() and
- board files which pass legacy GPIO numbers to this driver in platform data.
-
- In this patch we handle the former and convert gpio_blink_set() to take
- GPIO descriptor instead. In order to do this we convert the existing four
- users to accept GPIO descriptor and translate it to legacy GPIO number in
- the platform code. This effectively "pushes" legacy GPIO number usage from
- the driver to platforms.
-
- Also add comment to the remaining block describing that it is legacy code
- path and we are getting rid of it eventually.
-
- Suggested-by: Linus Walleij <linus.walleij at linaro.org>
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Andrew Lunn <andrew at lunn.ch>
- Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
- Acked-by: Alexandre Courbot <acourbot at nvidia.com>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 4117b39d39f59d2497ceac1091ec54aa3056cb4f
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Mon Nov 3 23:39:57 2014 +0100
-
- ACPI / GPIO: Document ACPI GPIO mappings API
-
- Document the previously introduced method that can be used by device
- drivers to provide the GPIO subsystem with mappings between GPIO names
- (connection IDs) and GpioIo()/GpioInt() resources in _CRS.
-
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
- Reviewed-by: Mika Westerberg <mika.westerberg at linux.intel.com>
-
-commit d9345c86ad290bb4ca98b37520f94fc8075b2b94
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Mon Oct 27 12:15:14 2014 +0200
-
- net: rfkill: gpio: Add default GPIO driver mappings for ACPI
-
- The driver uses devm_gpiod_get_index(..., index) so that the index refers
- directly to the GpioIo resource under the ACPI device. The problem with
- this is that if the ordering changes we get wrong GPIOs.
-
- With ACPI 5.1 _DSD we can now use names instead to reference GPIOs
- analogous to Device Tree. However, we still have systems out there that do
- not provide _DSD at all. These systems must be supported as well.
-
- Luckily we now have acpi_dev_add_driver_gpios() that can be used to provide
- mappings for systems where _DSD is not provided and still take advantage of
- _DSD if it exists.
-
- This patch changes the driver to create default GPIO mappings if we are
- running on ACPI system.
-
- While there we can drop the indices completely and use devm_gpiod_get()
- with name instead.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Reviewed-by: Johannes Berg <johannes at sipsolutions.net>
- Acked-by: John W. Linville <linville at tuxdriver.com>
- Acked-by: Linus Walleij <linus.walleij at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 22cb8c44e198b7e3f3299324edbcaa1389016d52
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Mon Nov 3 23:39:41 2014 +0100
-
- ACPI / GPIO: Driver GPIO mappings for ACPI GPIOs
-
- Provide a way for device drivers using GPIOs described by ACPI
- GpioIo resources in _CRS to tell the GPIO subsystem what names
- (connection IDs) to associate with specific GPIO pins defined
- in there.
-
- To do that, a driver needs to define a mapping table as a
- NULL-terminated array of struct acpi_gpio_mapping objects
- that each contain a name, a pointer to an array of line data
- (struct acpi_gpio_params) objects and the size of that array.
-
- Each struct acpi_gpio_params object consists of three fields,
- crs_entry_index, line_index, active_low, representing the index of
- the target GpioIo()/GpioInt() resource in _CRS starting from zero,
- the index of the target line in that resource starting from zero,
- and the active-low flag for that line, respectively.
-
- Next, the mapping table needs to be passed as the second
- argument to acpi_dev_add_driver_gpios() that will register it with
- the ACPI device object pointed to by its first argument. That
- should be done in the driver's .probe() routine.
-
- On removal, the driver should unregister its GPIO mapping table
- by calling acpi_dev_remove_driver_gpios() on the ACPI device
- object where that table was previously registered.
-
- Included are fixes from Mika Westerberg.
-
- Acked-by: Alexandre Courbot <acourbot at nvidia.com>
- Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit c70e2807a8bacbdfed992b58ca24eb152a778a01
-Author: Aaron Lu <aaron.lu at intel.com>
-Date: Tue Oct 21 13:34:00 2014 +0200
-
- input: gpio_keys_polled: Make use of device property API
-
- Make use of device property API in this driver so that both OF based
- system and ACPI based system can use this driver.
-
- Signed-off-by: Aaron Lu <aaron.lu at intel.com>
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 29257e751014d0d43f78bcfecd9a56a603096c95
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Mon Oct 27 23:30:10 2014 +0100
-
- leds: leds-gpio: Make use of device property API
-
- Make use of device property API in this driver so that both OF and ACPI
- based system can use the same driver.
-
- This change contains material from Max Eliaser and Mika Westerberg.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Bryan Wu <cooloney at gmail.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 08ddbc9678ce8465f17acc8e1b1b67442593d1b5
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Tue Oct 21 13:33:59 2014 +0200
-
- gpio: Support for unified device properties interface
-
- Some drivers need to deal with only firmware representation of its
- GPIOs. An example would be a GPIO button array driver where each button
- is described as a separate firmware node in device tree. Typically these
- child nodes do not have physical representation in the Linux device
- model.
-
- In order to help device drivers to handle such firmware child nodes we
- add dev[m]_get_named_gpiod_from_child() that takes a child firmware
- node pointer as its second argument (the first one is the parent device
- itself), finds the GPIO using whatever is the underlying firmware
- method, and requests the GPIO properly.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Alexandre Courbot <acourbot at nvidia.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 880614f83402ae8b408f33cb252505da0760f3e5
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Tue Nov 4 14:03:59 2014 +0100
-
- Driver core: Unified interface for firmware node properties
-
- Add new generic routines are provided for retrieving properties from
- device description objects in the platform firmware in case there are
- no struct device objects for them (either those objects have not been
- created yet or they do not exist at all).
-
- The following functions are provided:
-
- fwnode_property_present()
- fwnode_property_read_u8()
- fwnode_property_read_u16()
- fwnode_property_read_u32()
- fwnode_property_read_u64()
- fwnode_property_read_string()
- fwnode_property_read_u8_array()
- fwnode_property_read_u16_array()
- fwnode_property_read_u32_array()
- fwnode_property_read_u64_array()
- fwnode_property_read_string_array()
-
- in analogy with the corresponding functions for struct device added
- previously. For all of them, the first argument is a pointer to struct
- fwnode_handle (new type) that allows a device description object
- (depending on what platform firmware interface is in use) to be
- obtained.
-
- Add a new macro device_for_each_child_node() for iterating over the
- children of the device description object associated with a given
- device and a new function device_get_child_node_count() returning the
- number of a given device's child nodes.
-
- The interface covers both ACPI and Device Trees.
-
- Suggested-by: Grant Likely <grant.likely at linaro.org>
- Acked-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit b5923f9dc379c1861a70d8836c7d9976d9521390
-Author: Aaron Lu <aaron.lu at intel.com>
-Date: Tue Oct 21 23:30:25 2014 +0200
-
- input: gpio_keys_polled: Add support for GPIO descriptors
-
- GPIO descriptors are the preferred way over legacy GPIO numbers
- nowadays. Convert the driver to use GPIO descriptors internally but
- still allow passing legacy GPIO numbers from platform data to support
- existing platforms.
-
- Signed-off-by: Aaron Lu <aaron.lu at intel.com>
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Alexandre Courbot <acourbot at nvidia.com>
- Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
- Acked-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 5c3c4fe36a05672113646f8fb839e4c91256ef5d
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Mon Oct 27 23:29:32 2014 +0100
-
- leds: leds-gpio: Add support for GPIO descriptors
-
- GPIO descriptors are the preferred way over legacy GPIO numbers
- nowadays. Convert the driver to use GPIO descriptors internally but
- still allow passing legacy GPIO numbers from platform data to support
- existing platforms.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Alexandre Courbot <acourbot at nvidia.com>
- Acked-by: Bryan Wu <cooloney at gmail.com>
- Acked-by: Arnd Bergmann <arnd at arndb.de>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit 8105c03352f32060c765837cbb7d619e075289d9
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Tue Oct 21 13:33:56 2014 +0200
-
- gpio: sch: Consolidate core and resume banks
-
- This is actually a single device with two sets of identical registers,
- which just happen to start from a different offset. Instead of having
- separate GPIO chips created we consolidate them to be single GPIO chip.
-
- In addition having a single GPIO chip allows us to handle ACPI GPIO
- translation in the core in a more generic way, since the two GPIO chips
- share the same parent ACPI device.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Linus Walleij <linus.walleij at linaro.org>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit ce0e2672808ce2805d0aadfd12d94e2dd6be5ab9
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Wed Oct 29 15:41:01 2014 +0100
-
- gpio / ACPI: Add support for _DSD device properties
-
- With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and
- other things as well) returned by _CRS. Previously we were only able to
- use integer index to find the corresponding GPIO, which is pretty error
- prone if the order changes.
-
- With _DSD we can now query GPIOs using name instead of an integer index,
- like the below example shows:
-
- // Bluetooth device with reset and shutdown GPIOs
- Device (BTH)
- {
- Name (_HID, ...)
-
- Name (_CRS, ResourceTemplate ()
- {
- GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
- "\\_SB.GPO0", 0, ResourceConsumer) {15}
- GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
- "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
- })
-
- Name (_DSD, Package ()
- {
- ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
- Package ()
- {
- Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }},
- Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }},
- }
- })
- }
-
- The format of the supported GPIO property is:
-
- Package () { "name", Package () { ref, index, pin, active_low }}
-
- ref - The device that has _CRS containing GpioIo()/GpioInt() resources,
- typically this is the device itself (BTH in our case).
- index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
- pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
- active_low - If 1 the GPIO is marked as active_low.
-
- Since ACPI GpioIo() resource does not have field saying whether it is
- active low or high, the "active_low" argument can be used here. Setting
- it to 1 marks the GPIO as active low.
-
- In our Bluetooth example the "reset-gpio" refers to the second GpioIo()
- resource, second pin in that resource with the GPIO number of 31.
-
- This patch implements necessary support to gpiolib for extracting GPIOs
- using _DSD device properties.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Linus Walleij <linus.walleij at linaro.org>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit e072a051ef3a5d612949dc22ca71e40dbe978ed1
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Tue Oct 21 13:33:56 2014 +0200
-
- misc: at25: Make use of device property API
-
- Make use of device property API in this driver so that both DT and ACPI
- based systems can use this driver.
-
- In addition we hard-code the name of the chip to be "at25" for the
- reason that there is no common mechanism to fetch name of the firmware
- node. The only existing user (arch/arm/boot/dts/phy3250.dts) uses the
- same name so it should continue to work.
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit e176d66bf1a8e613e501dae1fc6798e1a42b7062
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Tue Oct 21 13:33:56 2014 +0200
-
- ACPI: Allow drivers to match using Device Tree compatible property
-
- We have lots of existing Device Tree enabled drivers and allocating
- separate _HID for each is not feasible. Instead we allocate special _HID
- "PRP0001" that means that the match should be done using Device Tree
- compatible property using driver's .of_match_table instead if the driver
- is missing .acpi_match_table.
-
- If there is a need to distinguish from where the device is enumerated
- (DT/ACPI) driver can check dev->of_node or ACPI_COMPATION(dev).
-
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit e30b98eab5645fa42d372cc1be44e22db5f5e9b8
-Author: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-Date: Tue Nov 4 01:28:56 2014 +0100
-
- Driver core: Unified device properties interface for platform firmware
-
- Add a uniform interface by which device drivers can request device
- properties from the platform firmware by providing a property name
- and the corresponding data type. The purpose of it is to help to
- write portable code that won't depend on any particular platform
- firmware interface.
-
- The following general helper functions are added:
-
- device_property_present()
- device_property_read_u8()
- device_property_read_u16()
- device_property_read_u32()
- device_property_read_u64()
- device_property_read_string()
- device_property_read_u8_array()
- device_property_read_u16_array()
- device_property_read_u32_array()
- device_property_read_u64_array()
- device_property_read_string_array()
-
- The first one allows the caller to check if the given property is
- present. The next 5 of them allow single-valued properties of
- various types to be retrieved in a uniform way. The remaining 5 are
- for reading properties with multiple values (arrays of either numbers
- or strings).
-
- The interface covers both ACPI and Device Trees.
-
- This change set includes material from Mika Westerberg and Aaron Lu.
-
- Signed-off-by: Aaron Lu <aaron.lu at intel.com>
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Acked-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit a8762c178234b62dce5e55df8de8528857a47bb7
-Author: Mika Westerberg <mika.westerberg at linux.intel.com>
-Date: Tue Oct 21 13:33:55 2014 +0200
-
- ACPI: Add support for device specific properties
-
- Device Tree is used in many embedded systems to describe the system
- configuration to the OS. It supports attaching properties or name-value
- pairs to the devices it describe. With these properties one can pass
- additional information to the drivers that would not be available
- otherwise.
-
- ACPI is another configuration mechanism (among other things) typically
- seen, but not limited to, x86 machines. ACPI allows passing arbitrary
- data from methods but there has not been mechanism equivalent to Device
- Tree until the introduction of _DSD in the recent publication of the
- ACPI 5.1 specification.
-
- In order to facilitate ACPI usage in systems where Device Tree is
- typically used, it would be beneficial to standardize a way to retrieve
- Device Tree style properties from ACPI devices, which is what we do in
- this patch.
-
- If a given device described in ACPI namespace wants to export properties it
- must implement _DSD method (Device Specific Data, introduced with ACPI 5.1)
- that returns the properties in a package of packages. For example:
-
- Name (_DSD, Package () {
- ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
- Package () {
- Package () {"name1", <VALUE1>},
- Package () {"name2", <VALUE2>},
- ...
- }
- })
-
- The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301
- and is documented in the ACPI 5.1 companion document called "_DSD
- Implementation Guide" [1], [2].
-
- We add several helper functions that can be used to extract these
- properties and convert them to different Linux data types.
-
- The ultimate goal is that we only have one device property API that
- retrieves the requested properties from Device Tree or from ACPI
- transparent to the caller.
-
- [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
- [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
-
- Reviewed-by: Hanjun Guo <hanjun.guo at linaro.org>
- Reviewed-by: Josh Triplett <josh at joshtriplett.org>
- Reviewed-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Darren Hart <dvhart at linux.intel.com>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
- Signed-off-by: Mika Westerberg <mika.westerberg at linux.intel.com>
- Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-
-commit a9240791b83abd372e4efb77f20444c27a56ebae
-Author: Mark Salter <msalter at redhat.com>
-Date: Tue Sep 30 17:19:24 2014 -0400
-
- arm64: avoid need for console= to enable serial console
-
- Tell kernel to prefer one of the serial ports on platforms
- pl011, 8250, or sbsa uarts. console= on command line will
- override these assumed preferences. This is just a hack to
- get the behavior we want from SPCR table support. Once SPCR
- is supported, we can drop this.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 6fee3b2bd2ad6349e7bb3082393bf6355e01ce6f
-Author: Tom Lendacky <thomas.lendacky at amd.com>
-Date: Tue Sep 9 23:33:17 2014 -0400
-
- drivers: net: AMD Seattle XGBE PHY support for A0 silicon
-
- This patch modifies the upstream AMD XGBE PHY driver to support
- A0 Seattle silicon in currently shipping systems. The upstream
- Linux driver is targetted for Seattle B0 silicon.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 0a0eea6d358d51ab381e2945c0e9db2f6cc06157
-Author: Tom Lendacky <thomas.lendacky at amd.com>
-Date: Tue Sep 9 23:34:07 2014 -0400
-
- drivers: net: AMD Seattle XGBE 10GbE support for A0 silicon
-
- This patch modifies the upstream AMD 10GbE XGBE Ethernet driver to
- support A0 Seattle silicon in currently shipping systems. The
- upstream Linux driver is targetted for Seattle B0 silicon.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit ff93b53f3ca8748529855d421bf79329086544cd
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Fri Jul 26 17:55:02 2013 +0100
-
- virtio-mmio: add ACPI probing
-
- Added the match table and pointers for ACPI probing to the driver.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
-
-commit 5315cb5a532e900612ac1202507551761e8bd13c
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Wed Jul 24 11:29:48 2013 +0100
-
- net: smc91x: add ACPI probing support.
-
- Add device ID LINA0003 for this device and add the match table.
-
- As its a platform device it needs no other code and will be probed in by
- acpi_platform once device ID is added.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
-
-commit 640f607f1fa10c7c0cd6025dde8883d02fc9b411
-Author: Mark Salter <msalter at redhat.com>
-Date: Sun Sep 14 09:44:44 2014 -0400
-
- Revert "ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware."
-
- This reverts commit 0bed13bebd6c99d097796d2ca6c4f10fb5b2eabc.
-
- Temporarily revert for backwards compatibility with rh-0.12-1 firmware
-
-commit e8afbea7e3e11f37c234770d72725894f92de415
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Aug 11 13:46:43 2014 -0400
-
- xgene: add support for ACPI-probed serial port
-
-commit 3d0ad3e452a81a32842d85dbb88078b74582efb5
-Author: Mark Salter <msalter at redhat.com>
-Date: Sat Aug 9 12:01:20 2014 -0400
-
- sata/xgene: support acpi probing
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit a42353df5a2f741e8d2e356c3f053aac8d3eff0e
-Author: Mark Salter <msalter at redhat.com>
-Date: Thu Sep 18 15:05:23 2014 -0400
-
- arm64: add sev to parking protocol
-
- Parking protocol wakes secondary cores with an interrupt.
- This patch adds an additional sev() to send an event. This
- is a temporary hack for APM Mustang board and not intended
- for upstream.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit d81f088880b9d763a7006e40dff6bb526c534255
-Author: Mark Salter <msalter at redhat.com>
-Date: Tue Sep 9 22:59:48 2014 -0400
-
- arm64: add parking protocol support
-
- This is a first-cut effort at parking protocol support. It is
- very much a work in progress (as is the spec it is based on).
- This code deviates from the current spec in a number of ways
- to work around current firmware issues and issues with kernels
- using 64K page sizes.
-
- caveat utilitor
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 475b6ce1555e1146761b53c550f2ac019311739f
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Thu Aug 28 14:26:16 2014 -0400
-
- ARM64 / ACPI: Introduce some PCI functions when PCI is enabled
-
- Introduce some PCI functions to make ACPI can be compiled when
- CONFIG_PCI is enabled, these functions should be revisited when
- implemented on ARM64.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
- [fixed up for 3.17-rc]
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit cb6ebe40936adc5c3154abbec6f89ccb8a0536b7
-Author: Al Stone <ahs3 at redhat.com>
-Date: Thu Aug 28 13:14:16 2014 -0400
-
- Fix arm64 compilation error in PNP code
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit b7fc0378e13207a53a3e8466ba6329cfbcaa0526
-Author: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
-Date: Tue Sep 9 15:37:15 2014 -0500
-
- ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
-
- This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver.
- It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller
- with following ASL structure in DSDT:
-
- Device (SATA0)
- {
- Name(_HID, "AMDI0600") // Seattle AHSATA
- Name (_CCA, 1) // Cache-coherent controller
- Name (_CRS, ResourceTemplate ()
- {
- Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
- Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
- })
- }
-
- Since ATA driver should not require PCI support for ATA_ACPI,
- this patch also removes dependency in the driver/ata/Kconfig.
-
- Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
-
-commit c5b655e6af273a61e7ec3653deb3550ae4f7abf1
-Author: Mark Salter <msalter at redhat.com>
-Date: Wed Nov 19 10:08:29 2014 -0500
-
- tty/sbsauart: make ttySBSA the active console device
-
- The sbsauart driver doesn't register itself as a console
- until module_initcall time. This allows the virtual console
- driver to register the active console if no console= is
- given on the cmdline. This patch allows ttySBSA to take
- over the active console device role from any existing
- console device if no console= is given on the cmdline.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 6bee52af3d281d91b871f6876138fa51a41f0472
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Wed Aug 13 13:47:18 2014 +0100
-
- tty: SBSA compatible UART
-
- This is a subset of pl011 UART which does not supprt DMA or baud rate
- changing. It does, however, provide earlycon support (i.e., using
- "earlycon=ttySBSA" on the kernel command line).
-
- It is specified in the Server Base System Architecture document from
- ARM.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
-
-commit a66f13e7c17cf7283b9987da2349c0a5c204fa4b
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Sep 8 11:58:46 2014 -0400
-
- acpi: fix acpi_os_ioremap for arm64
-
- The acpi_os_ioremap() function may be used to map normal RAM or IO
- regions. The current implementation simply uses ioremap_cache(). This
- will work for some architectures, but arm64 ioremap_cache() cannot be
- used to map IO regions which don't support caching. So for arm64, use
- ioremap() for non-RAM regions.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit b00f36975b651c0afbddee49e84109694e610f43
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Mon Sep 8 10:36:44 2014 -0400
-
- acpi: add arm to the platforms that use ioremap
-
- Now with the base changes to the arm memory mapping it is safe
- to convert to using ioremap to map in the tables.
-
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
-
-commit 4f6ca522fc13d8c13c844a2c2f9eafe091a336a9
-Author: Mark Salter <msalter at redhat.com>
-Date: Mon Sep 8 17:04:28 2014 -0400
-
- acpi/arm64: NOT FOR UPSTREAM - remove EXPERT dependency
-
- For convenience to keep existing configs working, remove
- CONFIG_EXPERT dependency from ACPI for ARM64. This shouldn't
- go upstream just yet.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 91eaa3c5387ebcf698b070a4c21e39e5240699ba
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Fri Oct 17 21:37:14 2014 +0800
-
- Documentation: ACPI for ARM64
-
- Add documentation for the guidelines of how to use ACPI
- on ARM64.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit ef17919599275fd58edb255ecf69807653cdd763
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Fri Oct 17 21:37:13 2014 +0800
-
- ARM64 / ACPI: Enable ARM64 in Kconfig
-
- Add Kconfigs to build ACPI on ARM64, and make ACPI available on ARM64.
-
- acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
- depend on X86 || IA64, and implement it on ARM64 in the future.
-
- Reviewed-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 7d78ff059af78cc5a80576314c38584834557fc1
-Author: Al Stone <al.stone at linaro.org>
-Date: Fri Oct 17 21:37:12 2014 +0800
-
- ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64
-
- ACPI reduced hardware mode is disabled by default, but ARM64
- can only run properly in ACPI hardware reduced mode, so select
- ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64.
-
- Reviewed-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 8a387ea5071c9d8bdaf5305320130022ec1d4f7d
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:11 2014 +0800
-
- ARM64 / ACPI: Parse GTDT to initialize arch timer
-
- Using the information presented by GTDT to initialize the arch
- timer (not memory-mapped).
-
- Originally-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 7523c8b3b0d23629781c4581272c0647fa543af5
-Author: Tomasz Nowicki <tomasz.nowicki at linaro.org>
-Date: Fri Oct 17 21:37:10 2014 +0800
-
- ARM64 / ACPI: Add GICv2 specific ACPI boot support
-
- ACPI kernel uses MADT table for proper GIC initialization. It needs to
- parse GIC related subtables, collect CPU interface and distributor
- addresses and call driver initialization function (which is hardware
- abstraction agnostic). In a similar way, FDT initialize GICv1/2.
-
- NOTE: This commit allow to initialize GICv1/2 basic functionality.
- GICv2 vitalization extension, GICv3/4 and ITS are considered as next
- steps.
-
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 743691994f2fb03bc05f539a42ba6ccccb5d18b8
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:09 2014 +0800
-
- ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
-
- Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
- used, and then register device's gsi with the core IRQ subsystem.
-
- acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
- since gsi is unique in the system, so use hwirq number directly
- for the mapping.
-
- Originally-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 0c4d9983cb7b50351aad0aa32e8b6134adaabb0d
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:08 2014 +0800
-
- ACPI / processor: Make it possible to get CPU hardware ID via GICC
-
- Introduce a new function map_gicc_mpidr() to allow MPIDRs to be obtained
- from the GICC Structure introduced by ACPI 5.1.
-
- MPIDR is the CPU hardware ID as local APIC ID on x86 platform, so we use
- MPIDR not the GIC CPU interface ID to identify CPUs.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit cb6b980abe388e25e357f73c5780aa1cf1b2e337
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:07 2014 +0800
-
- ARM64 / ACPI: Parse MADT for SMP initialization
-
- MADT contains the information for MPIDR which is essential for
- SMP initialization, parse the GIC cpu interface structures to
- get the MPIDR value and map it to cpu_logical_map(), and add
- enabled cpu with valid MPIDR into cpu_possible_map.
-
- ACPI 5.1 only has two explicit methods to boot up SMP, PSCI and
- Parking protocol, but the Parking protocol is only specified for
- ARMv7 now, so make PSCI as the only way for the SMP boot protocol
- before some updates for the ACPI spec or the Parking protocol spec.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
-
-commit 74a72e003ae388f460294a0910a536aced8ce93c
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:06 2014 +0800
-
- ACPI / table: Print GIC information when MADT is parsed
-
- When MADT is parsed, print GIC information to make the boot
- log look pretty:
-
- ACPI: GICC (acpi_id[0x0000] address[00000000e112f000] MPDIR[0x0] enabled)
- ACPI: GICC (acpi_id[0x0001] address[00000000e112f000] MPDIR[0x1] enabled)
- ...
- ACPI: GICC (acpi_id[0x0201] address[00000000e112f000] MPDIR[0x201] enabled)
-
- These information will be very helpful to bring up early systems to
- see if acpi_id and MPIDR are matched or not as spec defined.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
-
-commit 059facbd0f0664aaaf6d732ce02b2f56ea6ad98f
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:05 2014 +0800
-
- ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init
-
- There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set,
- the former signals to the OS that the firmware is PSCI compliant.
- The latter selects the appropriate conduit for PSCI calls by
- toggling between Hypervisor Calls (HVC) and Secure Monitor Calls
- (SMC).
-
- FADT table contains such information, parse FADT to get the flags
- for PSCI init. Since ACPI 5.1 doesn't support self defined PSCI
- function IDs, which means that only PSCI 0.2+ is supported in ACPI.
-
- At the same time, only ACPI 5.1 or higher verison supports PSCI,
- and FADT Major.Minor version was introduced in ACPI 5.1, so we
- will check the version and only parse FADT table with version >= 5.1.
-
- If firmware provides ACPI tables with ACPI version less than 5.1,
- OS will be messed up with those information and have no way to init
- smp and GIC, so disable ACPI if we get an FADT table with version
- less that 5.1.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
-
-commit 7ec63267bb1630c62e5f7fd2eb75a9a31131c89a
-Author: Hanjun Guo <hanjun.guo at linaro.org>
-Date: Fri Oct 17 21:37:04 2014 +0800
-
- ARM64 / ACPI: Make PCI optional for ACPI on ARM64
-
- As PCI for ARM64 is not ready, so introduce some stub functions
- to make PCI optional for ACPI, and make ACPI core run without
- CONFIG_PCI on ARM64.
-
- Since ACPI on X86 and IA64 depends on PCI and this patch only makes
- PCI optional for ARM64, it will not break anything on X86 and IA64.
-
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 2f1dd91e7866f2b617af29e9973b88b2cc2e00d6
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Fri Oct 17 21:37:03 2014 +0800
-
- ARM64 / ACPI: If we chose to boot from acpi then disable FDT
-
- If the early boot methods of acpi are happy that we have valid ACPI
- tables and acpi=force has been passed, then do not unflat devicetree
- effectively disabling further hardware probing from DT.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 6941a3cced9ca3d29e6e9c8b0f43917526b74789
-Author: Al Stone <al.stone at linaro.org>
-Date: Fri Oct 17 21:37:02 2014 +0800
-
- ARM64 / ACPI: Introduce early_param for "acpi" and pass acpi=force to enable ACPI
-
- Introduce one early parameters "off" and "force" for "acpi", acpi=off
- will be the default behavior for ARM64, so introduce acpi=force to
- enable ACPI on ARM64.
-
- Disable ACPI before early parameters parsed, and enable it to pass
- "acpi=force" if people want use ACPI on ARM64. This ensures DT be
- the prefer one if ACPI table and DT both are provided at this moment.
-
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 8764d6bd07827a2a29eaaa382fc397527ad1ba19
-Author: Graeme Gregory <graeme.gregory at linaro.org>
-Date: Fri Oct 17 21:37:01 2014 +0800
-
- ARM64 / ACPI: Introduce sleep-arm.c
-
- ACPI 5.1 does not currently support S states for ARM64 hardware but
- ACPI code will call acpi_target_system_state() for device power
- managment, so introduce sleep-arm.c to allow other drivers to function
- until S states are defined.
-
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit 37144fd61ca68e9d542e875187739c982c8d3662
-Author: Al Stone <al.stone at linaro.org>
-Date: Fri Oct 17 21:37:00 2014 +0800
-
- ARM64 / ACPI: Get RSDP and ACPI boot-time tables
-
- As we want to get ACPI tables to parse and then use the information
- for system initialization, we should get the RSDP (Root System
- Description Pointer) first, it then locates Extended Root Description
- Table (XSDT) which contains all the 64-bit physical address that
- pointer to other boot-time tables.
-
- Introduce acpi.c and its related head file in this patch to provide
- fundamental needs of extern variables and functions for ACPI core,
- and then get boot-time tables as needed.
- - asm/acenv.h for arch specific ACPICA environments and
- implementation, It is needed unconditionally by ACPI core;
- - asm/acpi.h for arch specific variables and functions needed by
- ACPI driver core;
- - acpi.c for ARM64 related ACPI implementation for ACPI driver
- core;
-
- acpi_boot_table_init() is introduced to get RSDP and boot-time tables,
- it will be called in setup_arch() before paging_init(), so we should
- use eary_memremap() mechanism here to get the RSDP and all the table
- pointers.
-
- Signed-off-by: Al Stone <al.stone at linaro.org>
- Signed-off-by: Graeme Gregory <graeme.gregory at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit a4f035d2876b41b6f224321da6b6278de577d4c5
-Author: Tomasz Nowicki <tomasz.nowicki at linaro.org>
-Date: Fri Oct 17 21:36:59 2014 +0800
-
- ACPI / table: Count matched and successfully parsed entries without specifying max entries
-
- It is very useful to traverse all available table entries without max
- number of expected entries type. Current acpi_parse_entries()
- implementation gives that feature but it does not count those entries,
- it returns 0 instead, so fix it to count matched and successfully
- entries and return it.
-
- NOTE: This change has no impact to x86 and ia64 archs since existing code
- checks for error occurrence only (acpi_parse_entries(...,0) < 0).
-
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit b3055f38d52f5be0103b436a1b04fbf3947aaa39
-Author: Ashwin Chaugule <ashwin.chaugule at linaro.org>
-Date: Fri Oct 17 21:36:58 2014 +0800
-
- ACPI / table: Add new function to get table entries
-
- The acpi_table_parse() function has a callback that
- passes a pointer to a table_header. Add a new function
- which takes this pointer and parses its entries. This
- eliminates the need to re-traverse all the tables for
- each call. e.g. as in acpi_table_parse_madt() which is
- normally called after acpi_table_parse().
-
- Acked-by: Grant Likely <grant.likely at linaro.org>
- Signed-off-by: Ashwin Chaugule <ashwin.chaugule at linaro.org>
- Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
- Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
-
-commit fff62dfc1d7ab6ad3d528b008413fd116d208150
-Author: Mark Salter <msalter at redhat.com>
-Date: Sat Nov 8 22:25:48 2014 -0500
-
- arm64: use UEFI for reboot
-
- Wire in support for UEFI reboot. We want UEFI reboot to have
- highest priority for capsule support.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 997a0488adb3f525aedb678b584f2733f43e248e
-Author: Mark Salter <msalter at redhat.com>
-Date: Sat Nov 8 15:25:41 2014 -0500
-
- arm64: use UEFI as last resort for poweroff
-
- Wire in support for poweroff via UEFI.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit 5b823d4bf52286f97dc76683b533ae5c08763897
-Author: Mark Salter <msalter at redhat.com>
-Date: Thu Jul 17 13:34:50 2014 -0400
-
- ahci_xgene: add errata workaround for ATA_CMD_SMART
-
- commit 2a0bdff6b958d1b2:
-
- ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
-
- added a workaround for X-Gene AHCI controller errata. This was done
- for all ATA_CMD_ID_ATA commands. The errata also appears to affect
- ATA_CMD_SMART commands as well. This was discovered when running
- smartd or just smartctl -x. This patch adds a dma engine restart for
- ATA_CMD_SMART commands which clears up the issues seen with smartd.
-
- Signed-off-by: Mark Salter <msalter at redhat.com>
-
-commit f866806e1ca75a0efc62cda59559286faa7c9926
-Author: Kyle McMartin <kmcmarti at redhat.com>
-Date: Tue May 13 22:25:26 2014 -0400
-
- arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
-
- Message-id: <20140513222526.GC26038 at redacted.bos.redhat.com>
- Patchwork-id: 79789
- O-Subject: [ACADIA PATCH] arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
- Bugzilla: 1085528
-
- BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1085528
- Upstream: submitted soon
-
- [Sadly this isn't (yet) sufficient... but it fixes at least one issue
- here... cat /proc/$$/personality shows READ_IMPLIES_EXEC before. I'll
- try to figure the rest out tomorrow.]
-
- Currently, we're accidentally ending up with executable stacks on
- AArch64 when the ABI says we shouldn't be, and relying on glibc to fix
- things up for us when we're loaded. However, SELinux will deny us
- mucking with the stack, and hit us with execmem AVCs.
-
- The reason this is happening is somewhat complex:
-
- fs/binfmt_elf.c:load_elf_binary()
- - initializes executable_stack = EXSTACK_DEFAULT implying the
- architecture should make up its mind.
- - does a pile of loading goo
- - runs through the program headers, looking for PT_GNU_STACK
- and setting (or unsetting) executable_stack if it finds it.
-
- This is our first problem, we won't generate these unless an
- executable stack is explicitly requested.
-
- - more ELF loading goo
- - sets whether we're a compat task or not (TIF_32BIT) based on compat.h
- - for compat reasons (pre-GNU_STACK) checks if the READ_IMPLIES_EXEC
- flag should be set for ancient toolchains
-
- Here's our second problem, we test if read_implies_exec based on
- stk != EXSTACK_DISABLE_X, which is true since stk == EXSTACK_DEFAULT.
-
- So we set current->personality |= READ_IMPLIES_EXEC like a broken
- legacy toolchain would want.
-
- - Now we call setup_arg_pages to set up the stack...
-
- fs/exec.c:setup_arg_pages()
- - lots of magic happens here
- - vm_flags gets initialized to VM_STACK_FLAGS
-
- Here's our third problem, VM_STACK_FLAGS on arm64 is
- VM_DEFAULT_DATA_FLAG which tests READ_IMPLIES_EXEC and sets VM_EXEC
- if it's true. So we end up with an executable stack mapping, since we
- don't have executable_stack set (it's still EXSTACK_DEFAULT at this
- point) to unset it anywhere.
-
- Bang. execstack AVC when the program starts running.
-
- The easiest way I can see to fix this is to test if we're a legacy task
- and fix it up there. But that's not as simple as it sounds, because
- the 32-bit ABI depends on what revision of the CPU we've enabled (not
- that it matters since we're ARMv8...) Regardless, in the compat case,
- set READ_IMPLIES_EXEC if we've found a GNU_STACK header which explicitly
- requested it as in arch/arm/kernel/elf.c:arm_elf_read_implies_exec().
-
- Signed-off-by: Kyle McMartin <kmcmarti at redhat.com>
- Signed-off-by: Donald Dutile <ddutile at redhat.com>
-
-commit a68d368ceb495cabafe82cdd0b83ec1e271a7f9d
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Fri Nov 7 14:12:34 2014 +0000
-
- arm64: kvm: eliminate literal pool entries
-
- Replace two instances of 'ldr xN, =(constant)' in the world switch
- hot path with 'mov' instructions.
-
- Acked-by: Marc Zyngier <marc.zyngier at arm.com>
- Acked-by: Christoffer Dall <christoffer.dall at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 246a31b3a8f065e831a6d8d9fd96f3a8e17dbdb9
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Fri Nov 7 14:12:33 2014 +0000
-
- arm64: ftrace: eliminate literal pool entries
-
- Replace ldr xN, =<symbol> with adrp/add or adrp/ldr [as appropriate]
- in the implementation of _mcount(), which may be called very often.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit ecd0f8e21514e8ac758ed16a188faaa4c5ef75c7
-Author: Mark Rutland <mark.rutland at arm.com>
-Date: Tue Nov 4 10:50:16 2014 +0000
-
- arm64: log physical ID of boot CPU
-
- In certain debugging scenarios it's useful to know the physical ID (i.e.
- the MPIDR_EL1.Aff* fields) of the boot CPU, but we don't currently log
- this as we do for 32-bit ARM kernels.
-
- This patch makes the kernel log the physical ID of the boot CPU early in
- the boot process. The CPU logical map initialisation is folded in to
- smp_setup_processor_id (which contrary to its name is also called by UP
- kernels). This is called before setup_arch, so should not adversely
- affect existing cpu_logical_map users.
-
- Acked-by: Sudeep Holla <sudeep.holla at arm.com>
- Acked-by: Catalin Marinas <catalin.marinas at arm.com>
- Acked-by: Lorenzo Pieralisis <lorenzo.pieralisi at arm.com>
- Signed-off-by: Mark Rutland <mark.rutland at arm.com>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 2899d6ea451eb0037427bbf430069f73cb76becc
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Mon Nov 3 16:50:01 2014 +0000
-
- arm64/crypto: use crypto instructions to generate AES key schedule
-
- This patch implements the AES key schedule generation using ARMv8
- Crypto Instructions. It replaces the table based C implementation
- in aes_generic.ko, which means we can drop the dependency on that
- module.
-
- Tested-by: Steve Capper <steve.capper at linaro.org>
- Acked-by: Steve Capper <steve.capper at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 67b1122c25f0c7a9a126ebabcd2085ef99640c13
-Author: Geoff Levand <geoff at infradead.org>
-Date: Fri Oct 31 23:06:47 2014 +0000
-
- arm64/kvm: Fix assembler compatibility of macros
-
- Some of the macros defined in kvm_arm.h are useful in assembly files, but are
- not compatible with the assembler. Change any C language integer constant
- definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also,
- add a preprocessor include of the asm/memory.h file which defines the UL()
- macro.
-
- Fixes build errors like these when using kvm_arm.h in assembly
- source files:
-
- Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)'
-
- Acked-by: Mark Rutland <mark.rutland at arm.com>
- Signed-off-by: Geoff Levand <geoff at infradead.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 6a3c07e9aa03b7fbec14ab8bc21fce8590f12d83
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Tue Oct 28 12:24:20 2014 +0000
-
- arm64/dt: add machine name to kernel call stack dump output
-
- This installs the machine name as recorded by setup_machine_fdt()
- as dump stack arch description. This results in the string to be
- included in call stack dumps, as is shown here:
-
- ...
- Bad mode in Synchronous Abort handler detected, code 0x84000005
- CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #548
- > Hardware name: linux,dummy-virt (DT)
- task: ffffffc07c870000 ti: ffffffc07c878000 task.ti: ffffffc07c878000
- PC is at 0x0
- ...
-
- Note that systems that support DMI/SMBIOS may override this later.
-
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 7c0569a739d0f1dd8ffd709cf37c53bb42143687
-Author: Steve Capper <steve.capper at linaro.org>
-Date: Fri Oct 24 13:22:20 2014 +0100
-
- arm64: xchg: Implement cmpxchg_double
-
- The arm64 architecture has the ability to exclusively load and store
- a pair of registers from an address (ldxp/stxp). Also the SLUB can take
- advantage of a cmpxchg_double implementation to avoid taking some
- locks.
-
- This patch provides an implementation of cmpxchg_double for 64-bit
- pairs, and activates the logic required for the SLUB to use these
- functions (HAVE_ALIGNED_STRUCT_PAGE and HAVE_CMPXCHG_DOUBLE).
-
- Also definitions of this_cpu_cmpxchg_8 and this_cpu_cmpxchg_double_8
- are wired up to cmpxchg_local and cmpxchg_double_local (rather than the
- stock implementations that perform non-atomic operations with
- interrupts disabled) as they are used by the SLUB.
-
- On a Juno platform running on only the A57s I get quite a noticeable
- performance improvement with 5 runs of hackbench on v3.17:
-
- Baseline | With Patch
- -----------------+-----------
- Mean 119.2312 | 106.1782
- StdDev 0.4919 | 0.4494
-
- (times taken to complete `./hackbench 100 process 1000', in seconds)
-
- Signed-off-by: Steve Capper <steve.capper at linaro.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 7acf53bfb80c2823d233c14d33cfd2d119713b89
-Author: Joonwoo Park <joonwoop at codeaurora.org>
-Date: Tue Oct 21 01:59:03 2014 +0100
-
- arm64: optimize memcpy_{from,to}io() and memset_io()
-
- Optimize memcpy_{from,to}io() and memset_io() by transferring in 64 bit
- as much as possible with minimized barrier usage. This simplest
- optimization brings faster throughput compare to current byte-by-byte read
- and write with barrier in the loop. Code's skeleton is taken from the
- powerpc.
-
- Link: http://lkml.kernel.org/p/20141020133304.GH23751@e104818-lin.cambridge.arm.com
- Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>
- Reviewed-by: Trilok Soni <tsoni at codeaurora.org>
- Signed-off-by: Joonwoo Park <joonwoop at codeaurora.org>
- Signed-off-by: Will Deacon <will.deacon at arm.com>
-
-commit 1971c19fb2a38a1d94cedada404760a917c36cd4
-Author: Mark Rutland <mark.rutland at arm.com>
-Date: Thu Oct 23 16:33:33 2014 +0100
-
- efi: efi-stub: notify on DTB absence
-
- In the absence of a DTB configuration table, the EFI stub will happily
- continue attempting to boot a kernel, despite the fact that this kernel
- may not function without a description of the hardware. In this case, as
- with a typo'd "dtb=" option (e.g. "dbt=") or many other possible
- failures, the only output seen by the user will be the rather terse
- output from the EFI stub:
-
- EFI stub: Booting Linux Kernel...
-
- To aid those attempting to debug such failures, this patch adds a notice
- when no DTB is found, making the output more helpful:
-
- EFI stub: Booting Linux Kernel...
- EFI stub: Generating empty DTB
-
- Additionally, a positive acknowledgement is added when a user-specified
- DTB is in use:
-
- EFI stub: Booting Linux Kernel...
- EFI stub: Using DTB from command line
-
- Similarly, a positive acknowledgement is added when a DTB from a
- configuration table is in use:
-
- EFI stub: Booting Linux Kernel...
- EFI stub: Using DTB from configuration table
-
- Signed-off-by: Mark Rutland <mark.rutland at arm.com>
- Acked-by: Leif Lindholm <leif.lindholm at linaro.org>
- Acked-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
- Acked-by: Roy Franz <roy.franz at linaro.org>
- Acked-by: Matt Fleming <matt.fleming at intel.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 7652016ff98e614ed2e3abac19b996af02434293
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Wed Oct 15 09:36:50 2014 +0200
-
- arm64: dmi: set DMI string as dump stack arch description
-
- This sets the DMI string, containing system type, serial number,
- firmware version etc. as dump stack arch description, so that oopses
- and other kernel stack dumps automatically have this information
- included, if available.
-
- Tested-by: Leif Lindholm <leif.lindholm at linaro.org>
- Acked-by: Leif Lindholm <leif.lindholm at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 2586f232bd388d2223f3c7bcba446b2bd25d8e3d
-Author: Yi Li <yi.li at linaro.org>
-Date: Sat Oct 4 23:46:43 2014 +0800
-
- arm64: dmi: Add SMBIOS/DMI support
-
- SMBIOS is important for server hardware vendors. It implements a spec for
- providing descriptive information about the platform. Things like serial
- numbers, physical layout of the ports, build configuration data, and the like.
-
- Signed-off-by: Yi Li <yi.li at linaro.org>
- Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
- Tested-by: Leif Lindholm <leif.lindholm at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 16b52b24f3d7a4f1555e4233398172b32306c1e4
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Tue Oct 14 16:41:27 2014 +0200
-
- dmi: add support for SMBIOS 3.0 64-bit entry point
-
- The DMTF SMBIOS reference spec v3.0.0 defines a new 64-bit entry point,
- which enables support for SMBIOS structure tables residing at a physical
- offset over 4 GB. This is especially important for upcoming arm64
- platforms whose system RAM resides entirely above the 4 GB boundary.
-
- For the UEFI case, this code attempts to detect the new SMBIOS 3.0
- header magic at the offset passed in the SMBIOS3_TABLE_GUID UEFI
- configuration table. If this configuration table is not provided, or
- if we fail to parse the header, we fall back to using the legacy
- SMBIOS_TABLE_GUID configuration table. This is in line with the spec,
- that allows both configuration tables to be provided, but mandates that
- they must point to the same structure table, unless the version pointed
- to by the 64-bit entry point is a superset of the 32-bit one.
-
- For the non-UEFI case, the detection logic is modified to look for the
- SMBIOS 3.0 header magic before it looks for the legacy header magic.
-
- Note that this patch is based on version 3.0.0d [draft] of the
- specification, which is expected not to deviate from the final version
- in ways that would affect the correctness of this implementation.
-
- Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
- Acked-by: Leif Lindholm <leif.lindholm at linaro.org>
- Tested-by: Leif Lindholm <leif.lindholm at linaro.org>
- Cc: Andrew Morton <akpm at linux-foundation.org>
- Cc: Tony Luck <tony.luck at intel.com>
- Acked-by: Matt Fleming <matt.fleming at intel.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 016f4b4f5cee9ddd8c243a36c220a65bdfb82dc8
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Tue Oct 14 16:34:47 2014 +0200
-
- efi: dmi: add support for SMBIOS 3.0 UEFI configuration table
-
- This adds support to the UEFI side for detecting the presence of
- a SMBIOS 3.0 64-bit entry point. This allows the actual SMBIOS
- structure table to reside at a physical offset over 4 GB, which
- cannot be supported by the legacy SMBIOS 32-bit entry point.
-
- Since the firmware can legally provide both entry points, store
- the SMBIOS 3.0 entry point in a separate variable, and let the
- DMI decoding layer decide which one will be used.
-
- Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
- Acked-by: Leif Lindholm <leif.lindholm at linaro.org>
- Acked-by: Matt Fleming <matt.fleming at intel.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit ac627ea950e853f0a3f91607fb16cb9477f434d7
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Fri Oct 17 12:44:11 2014 +0200
-
- arm64/efi: drop redundant set_bit(EFI_CONFIG_TABLES)
-
- The EFI_CONFIG_TABLES bit already gets set by efi_config_init(),
- so there is no reason to set it again after this function returns
- successfully.
-
- Acked-by: Will Deacon <will.deacon at arm.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 850ba08a3f4756a8340edadd4fdeccd881813ba5
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Mon Oct 20 15:31:57 2014 +0200
-
- arm64/efi: invert UEFI memory region reservation logic
-
- Instead of reserving the memory regions based on which types we know
- need to be reserved, consider only regions of the following types as
- free for general use by the OS:
-
- EFI_LOADER_CODE
- EFI_LOADER_DATA
- EFI_BOOT_SERVICES_CODE
- EFI_BOOT_SERVICES_DATA
- EFI_CONVENTIONAL_MEMORY
-
- Note that this also fixes a problem with the original code, which would
- misidentify a EFI_RUNTIME_SERVICES_DATA region as not reserved if it
- does not have the EFI_MEMORY_RUNTIME attribute set. However, it is
- perfectly legal for the firmware not to request a virtual mapping for
- EFI_RUNTIME_SERVICES_DATA regions that contain configuration tables, in
- which case the EFI_MEMORY_RUNTIME attribute would not be set.
-
- Acked-by: Roy Franz <roy.franz at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 2787807ca4f5f7df82a5c54312753b157e8c052e
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Fri Oct 10 18:42:55 2014 +0200
-
- arm64/efi: set PE/COFF file alignment to 512 bytes
-
- Change our PE/COFF header to use the minimum file alignment of
- 512 bytes (0x200), as mandated by the PE/COFF spec v8.3
-
- Also update the linker script so that the Image file itself is also a
- round multiple of FileAlignment.
-
- Acked-by: Catalin Marinas <catalin.marinas at arm.com>
- Acked-by: Roy Franz <roy.franz at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 7bd0585d9ab62d9787c389d3b62141b76319e5f7
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Fri Oct 10 11:25:24 2014 +0200
-
- arm64/efi: set PE/COFF section alignment to 4 KB
-
- Position independent AArch64 code needs to be linked and loaded at the
- same relative offset from a 4 KB boundary, or adrp/add and adrp/ldr
- pairs will not work correctly. (This is how PC relative symbol
- references with a 4 GB reach are emitted)
-
- We need to declare this in the PE/COFF header, otherwise the PE/COFF
- loader may load the Image and invoke the stub at an offset which
- violates this rule.
-
- Reviewed-by: Roy Franz <roy.franz at linaro.org>
- Acked-by: Mark Rutland <mark.rutland at arm.com>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
-commit 5a0edb2dbdf9327322ae57e8e16d162c2a371318
-Author: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-Date: Wed Oct 8 16:11:27 2014 +0200
-
- arm64/efi: efistub: jump to 'stext' directly, not through the header
-
- After the EFI stub has done its business, it jumps into the kernel by
- branching to offset #0 of the loaded Image, which is where it expects
- to find the header containing a 'branch to stext' instruction.
-
- However, the UEFI spec 2.1.1 states the following regarding PE/COFF
- image loading:
- "A UEFI image is loaded into memory through the LoadImage() Boot
- Service. This service loads an image with a PE32+ format into memory.
- This PE32+ loader is required to load all sections of the PE32+ image
- into memory."
-
- In other words, it is /not/ required to load parts of the image that are
- not covered by a PE/COFF section, so it may not have loaded the header
- at the expected offset, as it is not covered by any PE/COFF section.
-
- So instead, jump to 'stext' directly, which is at the base of the
- PE/COFF .text section, by supplying a symbol 'stext_offset' to
- efi-entry.o which contains the relative offset of stext into the Image.
- Also replace other open coded calculations of the same value with a
- reference to 'stext_offset'
-
- Acked-by: Mark Rutland <mark.rutland at arm.com>
- Acked-by: Roy Franz <roy.franz at linaro.org>
- Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
-
- Documentation/acpi/gpio-properties.txt | 96 +++
Documentation/arm64/arm-acpi.txt | 323 ++++++++++
- Documentation/gpio/consumer.txt | 18 +
Documentation/kernel-parameters.txt | 3 +-
- arch/arm/include/asm/kvm_mmu.h | 5 +-
- arch/arm/kvm/mmu.c | 22 +-
- arch/arm/mach-s3c24xx/h1940-bluetooth.c | 4 +-
- arch/arm/mach-s3c24xx/h1940.h | 4 +-
- arch/arm/mach-s3c24xx/mach-h1940.c | 3 +-
- arch/arm/mach-s3c24xx/mach-rx1950.c | 3 +-
- arch/arm/plat-orion/gpio.c | 3 +-
- arch/arm/plat-orion/include/plat/orion-gpio.h | 5 +-
- arch/arm64/Kconfig | 22 +
+ arch/arm/kvm/mmu.c | 4 +
+ arch/arm64/Kconfig | 9 +
arch/arm64/Makefile | 1 +
- arch/arm64/crypto/Kconfig | 5 +-
- arch/arm64/crypto/aes-ce-ccm-glue.c | 4 +-
- arch/arm64/crypto/aes-ce-cipher.c | 112 +++-
- arch/arm64/crypto/aes-ce-setkey.h | 5 +
- arch/arm64/crypto/aes-glue.c | 18 +-
arch/arm64/include/asm/acenv.h | 18 +
arch/arm64/include/asm/acpi.h | 102 +++
- arch/arm64/include/asm/cmpxchg.h | 71 +++
arch/arm64/include/asm/cpu_ops.h | 1 +
- arch/arm64/include/asm/dmi.h | 31 +
arch/arm64/include/asm/elf.h | 3 +-
- arch/arm64/include/asm/kvm_arm.h | 21 +-
- arch/arm64/include/asm/kvm_mmu.h | 5 +-
arch/arm64/include/asm/pci.h | 51 ++
arch/arm64/include/asm/psci.h | 3 +-
arch/arm64/include/asm/smp.h | 10 +-
arch/arm64/kernel/Makefile | 4 +-
arch/arm64/kernel/acpi.c | 398 ++++++++++++
arch/arm64/kernel/cpu_ops.c | 8 +-
- arch/arm64/kernel/efi-entry.S | 3 +-
- arch/arm64/kernel/efi.c | 74 ++-
- arch/arm64/kernel/entry-ftrace.S | 21 +-
- arch/arm64/kernel/head.S | 24 +-
- arch/arm64/kernel/io.c | 66 +-
+ arch/arm64/kernel/efi.c | 37 ++
arch/arm64/kernel/pci.c | 97 ++-
arch/arm64/kernel/psci.c | 78 ++-
- arch/arm64/kernel/setup.c | 51 +-
+ arch/arm64/kernel/setup.c | 44 +-
arch/arm64/kernel/smp.c | 2 +-
arch/arm64/kernel/smp_parking_protocol.c | 110 ++++
arch/arm64/kernel/time.c | 7 +
- arch/arm64/kernel/vmlinux.lds.S | 17 +
- arch/arm64/kvm/hyp.S | 4 +-
arch/arm64/mm/dma-mapping.c | 112 ++++
arch/arm64/pci/Makefile | 2 +
arch/arm64/pci/mmconfig.c | 292 +++++++++
arch/arm64/pci/pci.c | 461 ++++++++++++++
drivers/acpi/Kconfig | 6 +-
- drivers/acpi/Makefile | 7 +-
+ drivers/acpi/Makefile | 6 +-
drivers/acpi/bus.c | 3 +
- drivers/acpi/internal.h | 11 +
+ drivers/acpi/internal.h | 5 +
drivers/acpi/osl.c | 6 +-
drivers/acpi/processor_core.c | 37 ++
- drivers/acpi/property.c | 551 ++++++++++++++++
- drivers/acpi/scan.c | 129 +++-
drivers/acpi/sleep-arm.c | 28 +
- drivers/acpi/tables.c | 115 +++-
+ drivers/acpi/tables.c | 48 +-
drivers/acpi/utils.c | 26 +
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci_platform.c | 13 +
drivers/ata/ahci_xgene.c | 30 +-
- drivers/base/Makefile | 2 +-
- drivers/base/property.c | 431 +++++++++++++
- drivers/clocksource/arm_arch_timer.c | 120 +++-
- drivers/firmware/dmi_scan.c | 79 ++-
- drivers/firmware/efi/efi.c | 4 +
- drivers/firmware/efi/libstub/arm-stub.c | 11 +-
- drivers/gpio/devres.c | 32 +
- drivers/gpio/gpio-sch.c | 293 ++++-----
- drivers/gpio/gpiolib-acpi.c | 117 +++-
- drivers/gpio/gpiolib.c | 85 ++-
- drivers/gpio/gpiolib.h | 7 +-
- drivers/input/keyboard/gpio_keys_polled.c | 112 ++--
+ drivers/clocksource/arm_arch_timer.c | 136 +++-
+ drivers/input/keyboard/gpio_keys_polled.c | 1 +
drivers/iommu/arm-smmu.c | 8 +-
drivers/irqchip/irq-gic-v3.c | 10 +
- drivers/irqchip/irq-gic.c | 116 ++++
+ drivers/irqchip/irq-gic.c | 118 ++++
drivers/irqchip/irqchip.c | 3 +
- drivers/leds/leds-gpio.c | 140 ++--
- drivers/misc/eeprom/at25.c | 34 +-
- drivers/net/ethernet/amd/Kconfig | 2 +-
+ drivers/leds/leds-gpio.c | 1 +
drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 16 +-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 3 +
- drivers/net/ethernet/amd/xgbe/xgbe-main.c | 289 +++++++--
+ drivers/net/ethernet/amd/xgbe/xgbe-main.c | 276 ++++++--
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 20 +-
drivers/net/ethernet/amd/xgbe/xgbe-ptp.c | 4 +-
drivers/net/ethernet/amd/xgbe/xgbe.h | 13 +
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 69 +-
- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 68 +-
+ drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 80 ++-
drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 1 +
drivers/net/ethernet/smsc/smc91x.c | 10 +
- drivers/net/phy/Kconfig | 2 +-
drivers/net/phy/amd-xgbe-phy.c | 777 ++++++++++++-----------
- drivers/of/base.c | 33 +
drivers/pci/host/pci-xgene.c | 167 +++++
drivers/pnp/resource.c | 2 +
drivers/tty/Kconfig | 6 +
@@ -1922,132 +61,21 @@ Date: Wed Oct 8 16:11:27 2014 +0200
drivers/tty/sbsauart.c | 358 +++++++++++
drivers/tty/serial/8250/8250_dw.c | 9 +
drivers/virtio/virtio_mmio.c | 12 +-
- drivers/xen/efi.c | 1 +
- include/acpi/acpi_bus.h | 30 +
+ include/acpi/acpi_bus.h | 2 +
include/acpi/acpi_io.h | 6 +
include/asm-generic/vmlinux.lds.h | 7 +
include/kvm/arm_vgic.h | 20 +-
- include/linux/acpi.h | 141 +++-
+ include/linux/acpi.h | 1 +
include/linux/clocksource.h | 6 +
- include/linux/efi.h | 6 +-
- include/linux/gpio/consumer.h | 7 +
- include/linux/gpio_keys.h | 3 +
include/linux/irqchip/arm-gic-acpi.h | 31 +
include/linux/irqchip/arm-gic.h | 2 +
- include/linux/kvm_host.h | 1 +
- include/linux/leds.h | 3 +-
- include/linux/of.h | 34 +
include/linux/pci.h | 37 +-
- include/linux/property.h | 143 +++++
- net/rfkill/rfkill-gpio.c | 18 +-
virt/kvm/arm/arch_timer.c | 107 ++--
virt/kvm/arm/vgic-v2.c | 86 ++-
virt/kvm/arm/vgic-v3.c | 8 +-
virt/kvm/arm/vgic.c | 30 +-
- 125 files changed, 6843 insertions(+), 1117 deletions(-)
+ 76 files changed, 4208 insertions(+), 626 deletions(-)
-diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
-new file mode 100644
-index 0000000..ae36fcf
---- /dev/null
-+++ b/Documentation/acpi/gpio-properties.txt
-@@ -0,0 +1,96 @@
-+_DSD Device Properties Related to GPIO
-+--------------------------------------
-+
-+With the release of ACPI 5.1 and the _DSD configuration objecte names
-+can finally be given to GPIOs (and other things as well) returned by
-+_CRS. Previously, we were only able to use an integer index to find
-+the corresponding GPIO, which is pretty error prone (it depends on
-+the _CRS output ordering, for example).
-+
-+With _DSD we can now query GPIOs using a name instead of an integer
-+index, like the ASL example below shows:
-+
-+ // Bluetooth device with reset and shutdown GPIOs
-+ Device (BTH)
-+ {
-+ Name (_HID, ...)
-+
-+ Name (_CRS, ResourceTemplate ()
-+ {
-+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
-+ "\\_SB.GPO0", 0, ResourceConsumer) {15}
-+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
-+ "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
-+ })
-+
-+ Name (_DSD, Package ()
-+ {
-+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
-+ Package ()
-+ {
-+ Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }},
-+ Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }},
-+ }
-+ })
-+ }
-+
-+The format of the supported GPIO property is:
-+
-+ Package () { "name", Package () { ref, index, pin, active_low }}
-+
-+ ref - The device that has _CRS containing GpioIo()/GpioInt() resources,
-+ typically this is the device itself (BTH in our case).
-+ index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
-+ pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
-+ active_low - If 1 the GPIO is marked as active_low.
-+
-+Since ACPI GpioIo() resource does not have a field saying whether it is
-+active low or high, the "active_low" argument can be used here. Setting
-+it to 1 marks the GPIO as active low.
-+
-+In our Bluetooth example the "reset-gpio" refers to the second GpioIo()
-+resource, second pin in that resource with the GPIO number of 31.
-+
-+ACPI GPIO Mappings Provided by Drivers
-+--------------------------------------
-+
-+There are systems in which the ACPI tables do not contain _DSD but provide _CRS
-+with GpioIo()/GpioInt() resources and device drivers still need to work with
-+them.
-+
-+In those cases ACPI device identification objects, _HID, _CID, _CLS, _SUB, _HRV,
-+available to the driver can be used to identify the device and that is supposed
-+to be sufficient to determine the meaning and purpose of all of the GPIO lines
-+listed by the GpioIo()/GpioInt() resources returned by _CRS. In other words,
-+the driver is supposed to know what to use the GpioIo()/GpioInt() resources for
-+once it has identified the device. Having done that, it can simply assign names
-+to the GPIO lines it is going to use and provide the GPIO subsystem with a
-+mapping between those names and the ACPI GPIO resources corresponding to them.
-+
-+To do that, the driver needs to define a mapping table as a NULL-terminated
-+array of struct acpi_gpio_mapping objects that each contain a name, a pointer
-+to an array of line data (struct acpi_gpio_params) objects and the size of that
-+array. Each struct acpi_gpio_params object consists of three fields,
-+crs_entry_index, line_index, active_low, representing the index of the target
-+GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target
-+line in that resource starting from zero, and the active-low flag for that line,
-+respectively, in analogy with the _DSD GPIO property format specified above.
-+
-+For the example Bluetooth device discussed previously the data structures in
-+question would look like this:
-+
-+static const struct acpi_gpio_params reset_gpio = { 1, 1, false };
-+static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false };
-+
-+static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
-+ { "reset-gpio", &reset_gpio, 1 },
-+ { "shutdown-gpio", &shutdown_gpio, 1 },
-+ { },
-+};
-+
-+Next, the mapping table needs to be passed as the second argument to
-+acpi_dev_add_driver_gpios() that will register it with the ACPI device object
-+pointed to by its first argument. That should be done in the driver's .probe()
-+routine. On removal, the driver should unregister its GPIO mapping table by
-+calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
-+table was previously registered.
diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
new file mode 100644
index 0000000..17cf96d
@@ -2377,37 +405,8 @@ index 0000000..17cf96d
+submitted to ASWG and go through the normal approval process; for those that
+are not UEFI members, many other members of the Linux community are and would
+likely be willing to assist in submitting ECRs.
-diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
-index 6ce5441..859918d 100644
---- a/Documentation/gpio/consumer.txt
-+++ b/Documentation/gpio/consumer.txt
-@@ -219,6 +219,24 @@ part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
- capabilities.
-
-
-+GPIOs and ACPI
-+==============
-+
-+On ACPI systems, GPIOs are described by GpioIo()/GpioInt() resources listed by
-+the _CRS configuration objects of devices. Those resources do not provide
-+connection IDs (names) for GPIOs, so it is necessary to use an additional
-+mechanism for this purpose.
-+
-+Systems compliant with ACPI 5.1 or newer may provide a _DSD configuration object
-+which, among other things, may be used to provide connection IDs for specific
-+GPIOs described by the GpioIo()/GpioInt() resources in _CRS. If that is the
-+case, it will be handled by the GPIO subsystem automatically. However, if the
-+_DSD is not present, the mappings between GpioIo()/GpioInt() resources and GPIO
-+connection IDs need to be provided by device drivers.
-+
-+For details refer to Documentation/acpi/gpio-properties.txt
-+
-+
- Interacting With the Legacy GPIO Subsystem
- ==========================================
- Many kernel subsystems still handle GPIOs using the legacy integer-based
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
-index 479f332..6187d9b 100644
+index 4df73da..4adfd50 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
@@ -2427,65 +426,11 @@ index 479f332..6187d9b 100644
See also Documentation/power/runtime_pm.txt, pci=noacpi
-diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
-index acb0d57..f867060 100644
---- a/arch/arm/include/asm/kvm_mmu.h
-+++ b/arch/arm/include/asm/kvm_mmu.h
-@@ -161,9 +161,10 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
- }
-
- static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
-- unsigned long size)
-+ unsigned long size,
-+ bool ipa_uncached)
- {
-- if (!vcpu_has_cache_enabled(vcpu))
-+ if (!vcpu_has_cache_enabled(vcpu) || ipa_uncached)
- kvm_flush_dcache_to_poc((void *)hva, size);
-
- /*
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
-index 8664ff1..8fa2060 100644
+index 1dc9778..0b88d36 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
-@@ -853,6 +853,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
- struct vm_area_struct *vma;
- pfn_t pfn;
- pgprot_t mem_type = PAGE_S2;
-+ bool fault_ipa_uncached;
-
- write_fault = kvm_is_write_fault(vcpu);
- if (fault_status == FSC_PERM && !write_fault) {
-@@ -919,6 +920,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
- if (!hugetlb && !force_pte)
- hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
-
-+ fault_ipa_uncached = memslot->flags & KVM_MEMSLOT_INCOHERENT;
-+
- if (hugetlb) {
- pmd_t new_pmd = pfn_pmd(pfn, mem_type);
- new_pmd = pmd_mkhuge(new_pmd);
-@@ -926,7 +929,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
- kvm_set_s2pmd_writable(&new_pmd);
- kvm_set_pfn_dirty(pfn);
- }
-- coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE);
-+ coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE,
-+ fault_ipa_uncached);
- ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
- } else {
- pte_t new_pte = pfn_pte(pfn, mem_type);
-@@ -934,7 +938,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
- kvm_set_s2pte_writable(&new_pte);
- kvm_set_pfn_dirty(pfn);
- }
-- coherent_cache_guest_page(vcpu, hva, PAGE_SIZE);
-+ coherent_cache_guest_page(vcpu, hva, PAGE_SIZE,
-+ fault_ipa_uncached);
- ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte,
- pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE));
- }
-@@ -1245,6 +1250,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
+@@ -1315,6 +1315,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
(KVM_PHYS_SIZE >> PAGE_SHIFT))
return -EFAULT;
@@ -2496,159 +441,19 @@ index 8664ff1..8fa2060 100644
/*
* A memory region could potentially cover multiple VMAs, and any holes
* between them, so iterate over all of them to find out if we can map
-@@ -1310,6 +1319,15 @@ void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
- int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
- unsigned long npages)
- {
-+ /*
-+ * Readonly memslots are not incoherent with the caches by definition,
-+ * but in practice, they are used mostly to emulate ROMs or NOR flashes
-+ * that the guest may consider devices and hence map as uncached.
-+ * To prevent incoherency issues in these cases, tag all readonly
-+ * regions as incoherent.
-+ */
-+ if (slot->flags & KVM_MEM_READONLY)
-+ slot->flags |= KVM_MEMSLOT_INCOHERENT;
- return 0;
- }
-
-diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
-index b4d14b8..9c8b127 100644
---- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
-+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
-@@ -41,7 +41,7 @@ static void h1940bt_enable(int on)
- mdelay(10);
- gpio_set_value(S3C2410_GPH(1), 0);
-
-- h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL);
-+ h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
- }
- else {
- gpio_set_value(S3C2410_GPH(1), 1);
-@@ -50,7 +50,7 @@ static void h1940bt_enable(int on)
- mdelay(10);
- gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-- h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
-+ h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
- }
- }
-
-diff --git a/arch/arm/mach-s3c24xx/h1940.h b/arch/arm/mach-s3c24xx/h1940.h
-index 2950cc4..596d9f6 100644
---- a/arch/arm/mach-s3c24xx/h1940.h
-+++ b/arch/arm/mach-s3c24xx/h1940.h
-@@ -19,8 +19,10 @@
- #define H1940_SUSPEND_RESUMEAT (0x30081000)
- #define H1940_SUSPEND_CHECK (0x30080000)
-
-+struct gpio_desc;
-+
- extern void h1940_pm_return(void);
--extern int h1940_led_blink_set(unsigned gpio, int state,
-+extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on,
- unsigned long *delay_off);
-
-diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
-index d35ddc1..d40d4f5 100644
---- a/arch/arm/mach-s3c24xx/mach-h1940.c
-+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
-@@ -359,10 +359,11 @@ static struct platform_device h1940_battery = {
-
- static DEFINE_SPINLOCK(h1940_blink_spin);
-
--int h1940_led_blink_set(unsigned gpio, int state,
-+int h1940_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off)
- {
- int blink_gpio, check_gpio1, check_gpio2;
-+ int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
-
- switch (gpio) {
- case H1940_LATCH_LED_GREEN:
-diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
-index c3f2682..1d35ff3 100644
---- a/arch/arm/mach-s3c24xx/mach-rx1950.c
-+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
-@@ -250,9 +250,10 @@ static void rx1950_disable_charger(void)
-
- static DEFINE_SPINLOCK(rx1950_blink_spin);
-
--static int rx1950_led_blink_set(unsigned gpio, int state,
-+static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off)
- {
-+ int gpio = desc_to_gpio(desc);
- int blink_gpio, check_gpio;
-
- switch (gpio) {
-diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
-index e048f61..e53fc8d 100644
---- a/arch/arm/plat-orion/gpio.c
-+++ b/arch/arm/plat-orion/gpio.c
-@@ -306,9 +306,10 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
-
- #define ORION_BLINK_HALF_PERIOD 100 /* ms */
-
--int orion_gpio_led_blink_set(unsigned gpio, int state,
-+int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off)
- {
-+ unsigned gpio = desc_to_gpio(desc);
-
- if (delay_on && delay_off && !*delay_on && !*delay_off)
- *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
-diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
-index e763988..e856b07 100644
---- a/arch/arm/plat-orion/include/plat/orion-gpio.h
-+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
-@@ -14,12 +14,15 @@
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/irqdomain.h>
-+
-+struct gpio_desc;
-+
- /*
- * Orion-specific GPIO API extensions.
- */
- void orion_gpio_set_unused(unsigned pin);
- void orion_gpio_set_blink(unsigned pin, int blink);
--int orion_gpio_led_blink_set(unsigned gpio, int state,
-+int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off);
-
- #define GPIO_INPUT_OK (1 << 0)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
-index 9532f8d..80a82ac 100644
+index b1f9a20..d60e537 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
-@@ -4,6 +4,7 @@ config ARM64
- select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+@@ -5,6 +5,7 @@ config ARM64
+ select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_SG_CHAIN
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+ select ACPI_REDUCED_HARDWARE_ONLY if ACPI
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_WANT_OPTIONAL_GPIOLIB
-@@ -34,6 +35,7 @@ config ARM64
- select GENERIC_TIME_VSYSCALL
- select HANDLE_DOMAIN_IRQ
- select HARDIRQS_SW_RESEND
-+ select HAVE_ALIGNED_STRUCT_PAGE if SLUB
- select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_JUMP_LABEL
- select HAVE_ARCH_KGDB
-@@ -41,6 +43,7 @@ config ARM64
- select HAVE_BPF_JIT
- select HAVE_C_RECORDMCOUNT
- select HAVE_CC_STACKPROTECTOR
-+ select HAVE_CMPXCHG_DOUBLE
- select HAVE_DEBUG_BUGVERBOSE
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_DMA_API_DEBUG
-@@ -185,6 +188,9 @@ config PCI_DOMAINS_GENERIC
+@@ -193,6 +194,9 @@ config PCI_DOMAINS_GENERIC
config PCI_SYSCALL
def_bool PCI
@@ -2658,7 +463,7 @@ index 9532f8d..80a82ac 100644
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/hotplug/Kconfig"
-@@ -268,6 +274,9 @@ config SMP
+@@ -384,6 +388,9 @@ config SMP
If you don't know what to do here, say N.
@@ -2668,25 +473,7 @@ index 9532f8d..80a82ac 100644
config SCHED_MC
bool "Multi-core scheduler support"
depends on SMP
-@@ -401,6 +410,17 @@ config EFI
- allow the kernel to be booted as an EFI application. This
- is only useful on systems that have UEFI firmware.
-
-+config DMI
-+ bool "Enable support for SMBIOS (DMI) tables"
-+ depends on EFI
-+ default y
-+ help
-+ This enables SMBIOS/DMI feature for systems.
-+
-+ This option is only useful on systems that have UEFI firmware.
-+ However, even with this option, the resultant kernel should
-+ continue to boot on existing non-UEFI platforms.
-+
- endmenu
-
- menu "Userspace binary formats"
-@@ -454,6 +474,8 @@ source "drivers/Kconfig"
+@@ -646,6 +653,8 @@ source "drivers/Kconfig"
source "drivers/firmware/Kconfig"
@@ -2696,7 +483,7 @@ index 9532f8d..80a82ac 100644
source "arch/arm64/kvm/Kconfig"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
-index 20901ff..983d72a 100644
+index 1c43cec..ab3b0b1 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -49,6 +49,7 @@ core-$(CONFIG_NET) += arch/arm64/net/
@@ -2707,293 +494,28 @@ index 20901ff..983d72a 100644
libs-y := arch/arm64/lib/ $(libs-y)
libs-y += $(LIBGCC)
libs-$(CONFIG_EFI_STUB) += drivers/firmware/efi/libstub/
-diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
-index 5562652..a38b02c 100644
---- a/arch/arm64/crypto/Kconfig
-+++ b/arch/arm64/crypto/Kconfig
-@@ -27,20 +27,19 @@ config CRYPTO_AES_ARM64_CE
- tristate "AES core cipher using ARMv8 Crypto Extensions"
- depends on ARM64 && KERNEL_MODE_NEON
- select CRYPTO_ALGAPI
-- select CRYPTO_AES
-
- config CRYPTO_AES_ARM64_CE_CCM
- tristate "AES in CCM mode using ARMv8 Crypto Extensions"
- depends on ARM64 && KERNEL_MODE_NEON
- select CRYPTO_ALGAPI
-- select CRYPTO_AES
-+ select CRYPTO_AES_ARM64_CE
- select CRYPTO_AEAD
-
- config CRYPTO_AES_ARM64_CE_BLK
- tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions"
- depends on ARM64 && KERNEL_MODE_NEON
- select CRYPTO_BLKCIPHER
-- select CRYPTO_AES
-+ select CRYPTO_AES_ARM64_CE
- select CRYPTO_ABLK_HELPER
-
- config CRYPTO_AES_ARM64_NEON_BLK
-diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c
-index 9e6cdde..0ac73b8 100644
---- a/arch/arm64/crypto/aes-ce-ccm-glue.c
-+++ b/arch/arm64/crypto/aes-ce-ccm-glue.c
-@@ -16,6 +16,8 @@
- #include <linux/crypto.h>
- #include <linux/module.h>
-
-+#include "aes-ce-setkey.h"
-+
- static int num_rounds(struct crypto_aes_ctx *ctx)
- {
- /*
-@@ -48,7 +50,7 @@ static int ccm_setkey(struct crypto_aead *tfm, const u8 *in_key,
- struct crypto_aes_ctx *ctx = crypto_aead_ctx(tfm);
- int ret;
-
-- ret = crypto_aes_expand_key(ctx, in_key, key_len);
-+ ret = ce_aes_expandkey(ctx, in_key, key_len);
- if (!ret)
- return 0;
-
-diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-cipher.c
-index 2075e1a..ce47792 100644
---- a/arch/arm64/crypto/aes-ce-cipher.c
-+++ b/arch/arm64/crypto/aes-ce-cipher.c
-@@ -14,6 +14,8 @@
- #include <linux/crypto.h>
- #include <linux/module.h>
-
-+#include "aes-ce-setkey.h"
-+
- MODULE_DESCRIPTION("Synchronous AES cipher using ARMv8 Crypto Extensions");
- MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel at linaro.org>");
- MODULE_LICENSE("GPL v2");
-@@ -124,6 +126,114 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
- kernel_neon_end();
- }
-
+diff --git a/arch/arm64/include/asm/acenv.h b/arch/arm64/include/asm/acenv.h
+new file mode 100644
+index 0000000..b49166f
+--- /dev/null
++++ b/arch/arm64/include/asm/acenv.h
+@@ -0,0 +1,18 @@
+/*
-+ * aes_sub() - use the aese instruction to perform the AES sbox substitution
-+ * on each byte in 'input'
++ * ARM64 specific ACPICA environments and implementation
++ *
++ * Copyright (C) 2014, Linaro Ltd.
++ * Author: Hanjun Guo <hanjun.guo at linaro.org>
++ * Author: Graeme Gregory <graeme.gregory at linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
-+static u32 aes_sub(u32 input)
-+{
-+ u32 ret;
+
-+ __asm__("dup v1.4s, %w[in] ;"
-+ "movi v0.16b, #0 ;"
-+ "aese v0.16b, v1.16b ;"
-+ "umov %w[out], v0.4s[0] ;"
++#ifndef _ASM_ACENV_H
++#define _ASM_ACENV_H
+
-+ : [out] "=r"(ret)
-+ : [in] "r"(input)
-+ : "v0","v1");
-+
-+ return ret;
-+}
-+
-+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
-+ unsigned int key_len)
-+{
-+ /*
-+ * The AES key schedule round constants
-+ */
-+ static u8 const rcon[] = {
-+ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36,
-+ };
-+
-+ u32 kwords = key_len / sizeof(u32);
-+ struct aes_block *key_enc, *key_dec;
-+ int i, j;
-+
-+ if (key_len != AES_KEYSIZE_128 &&
-+ key_len != AES_KEYSIZE_192 &&
-+ key_len != AES_KEYSIZE_256)
-+ return -EINVAL;
-+
-+ memcpy(ctx->key_enc, in_key, key_len);
-+ ctx->key_length = key_len;
-+
-+ kernel_neon_begin_partial(2);
-+ for (i = 0; i < sizeof(rcon); i++) {
-+ u32 *rki = ctx->key_enc + (i * kwords);
-+ u32 *rko = rki + kwords;
-+
-+ rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
-+ rko[1] = rko[0] ^ rki[1];
-+ rko[2] = rko[1] ^ rki[2];
-+ rko[3] = rko[2] ^ rki[3];
-+
-+ if (key_len == AES_KEYSIZE_192) {
-+ if (i >= 7)
-+ break;
-+ rko[4] = rko[3] ^ rki[4];
-+ rko[5] = rko[4] ^ rki[5];
-+ } else if (key_len == AES_KEYSIZE_256) {
-+ if (i >= 6)
-+ break;
-+ rko[4] = aes_sub(rko[3]) ^ rki[4];
-+ rko[5] = rko[4] ^ rki[5];
-+ rko[6] = rko[5] ^ rki[6];
-+ rko[7] = rko[6] ^ rki[7];
-+ }
-+ }
-+
-+ /*
-+ * Generate the decryption keys for the Equivalent Inverse Cipher.
-+ * This involves reversing the order of the round keys, and applying
-+ * the Inverse Mix Columns transformation on all but the first and
-+ * the last one.
-+ */
-+ key_enc = (struct aes_block *)ctx->key_enc;
-+ key_dec = (struct aes_block *)ctx->key_dec;
-+ j = num_rounds(ctx);
-+
-+ key_dec[0] = key_enc[j];
-+ for (i = 1, j--; j > 0; i++, j--)
-+ __asm__("ld1 {v0.16b}, %[in] ;"
-+ "aesimc v1.16b, v0.16b ;"
-+ "st1 {v1.16b}, %[out] ;"
-+
-+ : [out] "=Q"(key_dec[i])
-+ : [in] "Q"(key_enc[j])
-+ : "v0","v1");
-+ key_dec[i] = key_enc[0];
-+
-+ kernel_neon_end();
-+ return 0;
-+}
-+EXPORT_SYMBOL(ce_aes_expandkey);
-+
-+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
-+ unsigned int key_len)
-+{
-+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
-+ int ret;
-+
-+ ret = ce_aes_expandkey(ctx, in_key, key_len);
-+ if (!ret)
-+ return 0;
-+
-+ tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(ce_aes_setkey);
-+
- static struct crypto_alg aes_alg = {
- .cra_name = "aes",
- .cra_driver_name = "aes-ce",
-@@ -135,7 +245,7 @@ static struct crypto_alg aes_alg = {
- .cra_cipher = {
- .cia_min_keysize = AES_MIN_KEY_SIZE,
- .cia_max_keysize = AES_MAX_KEY_SIZE,
-- .cia_setkey = crypto_aes_set_key,
-+ .cia_setkey = ce_aes_setkey,
- .cia_encrypt = aes_cipher_encrypt,
- .cia_decrypt = aes_cipher_decrypt
- }
-diff --git a/arch/arm64/crypto/aes-ce-setkey.h b/arch/arm64/crypto/aes-ce-setkey.h
-new file mode 100644
-index 0000000..f08a647
---- /dev/null
-+++ b/arch/arm64/crypto/aes-ce-setkey.h
-@@ -0,0 +1,5 @@
-+
-+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
-+ unsigned int key_len);
-+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
-+ unsigned int key_len);
-diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
-index 79cd911..801aae3 100644
---- a/arch/arm64/crypto/aes-glue.c
-+++ b/arch/arm64/crypto/aes-glue.c
-@@ -16,9 +16,13 @@
- #include <linux/module.h>
- #include <linux/cpufeature.h>
-
-+#include "aes-ce-setkey.h"
-+
- #ifdef USE_V8_CRYPTO_EXTENSIONS
- #define MODE "ce"
- #define PRIO 300
-+#define aes_setkey ce_aes_setkey
-+#define aes_expandkey ce_aes_expandkey
- #define aes_ecb_encrypt ce_aes_ecb_encrypt
- #define aes_ecb_decrypt ce_aes_ecb_decrypt
- #define aes_cbc_encrypt ce_aes_cbc_encrypt
-@@ -30,6 +34,8 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
- #else
- #define MODE "neon"
- #define PRIO 200
-+#define aes_setkey crypto_aes_set_key
-+#define aes_expandkey crypto_aes_expand_key
- #define aes_ecb_encrypt neon_aes_ecb_encrypt
- #define aes_ecb_decrypt neon_aes_ecb_decrypt
- #define aes_cbc_encrypt neon_aes_cbc_encrypt
-@@ -79,10 +85,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
- struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
- int ret;
-
-- ret = crypto_aes_expand_key(&ctx->key1, in_key, key_len / 2);
-+ ret = aes_expandkey(&ctx->key1, in_key, key_len / 2);
- if (!ret)
-- ret = crypto_aes_expand_key(&ctx->key2, &in_key[key_len / 2],
-- key_len / 2);
-+ ret = aes_expandkey(&ctx->key2, &in_key[key_len / 2],
-+ key_len / 2);
- if (!ret)
- return 0;
-
-@@ -288,7 +294,7 @@ static struct crypto_alg aes_algs[] = { {
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
-- .setkey = crypto_aes_set_key,
-+ .setkey = aes_setkey,
- .encrypt = ecb_encrypt,
- .decrypt = ecb_decrypt,
- },
-@@ -306,7 +312,7 @@ static struct crypto_alg aes_algs[] = { {
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
-- .setkey = crypto_aes_set_key,
-+ .setkey = aes_setkey,
- .encrypt = cbc_encrypt,
- .decrypt = cbc_decrypt,
- },
-@@ -324,7 +330,7 @@ static struct crypto_alg aes_algs[] = { {
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
-- .setkey = crypto_aes_set_key,
-+ .setkey = aes_setkey,
- .encrypt = ctr_encrypt,
- .decrypt = ctr_encrypt,
- },
-diff --git a/arch/arm64/include/asm/acenv.h b/arch/arm64/include/asm/acenv.h
-new file mode 100644
-index 0000000..b49166f
---- /dev/null
-+++ b/arch/arm64/include/asm/acenv.h
-@@ -0,0 +1,18 @@
-+/*
-+ * ARM64 specific ACPICA environments and implementation
-+ *
-+ * Copyright (C) 2014, Linaro Ltd.
-+ * Author: Hanjun Guo <hanjun.guo at linaro.org>
-+ * Author: Graeme Gregory <graeme.gregory at linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_ACENV_H
-+#define _ASM_ACENV_H
-+
-+/* It is required unconditionally by ACPI core, update it when needed. */
++/* It is required unconditionally by ACPI core, update it when needed. */
+
+#endif /* _ASM_ACENV_H */
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
@@ -3104,102 +626,6 @@ index 0000000..6e692f4
+#endif /* CONFIG_ACPI */
+
+#endif /*_ASM_ACPI_H*/
-diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
-index ddb9d78..89e397b 100644
---- a/arch/arm64/include/asm/cmpxchg.h
-+++ b/arch/arm64/include/asm/cmpxchg.h
-@@ -19,6 +19,7 @@
- #define __ASM_CMPXCHG_H
-
- #include <linux/bug.h>
-+#include <linux/mmdebug.h>
-
- #include <asm/barrier.h>
-
-@@ -152,6 +153,51 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
- return oldval;
- }
-
-+#define system_has_cmpxchg_double() 1
-+
-+static inline int __cmpxchg_double(volatile void *ptr1, volatile void *ptr2,
-+ unsigned long old1, unsigned long old2,
-+ unsigned long new1, unsigned long new2, int size)
-+{
-+ unsigned long loop, lost;
-+
-+ switch (size) {
-+ case 8:
-+ VM_BUG_ON((unsigned long *)ptr2 - (unsigned long *)ptr1 != 1);
-+ do {
-+ asm volatile("// __cmpxchg_double8\n"
-+ " ldxp %0, %1, %2\n"
-+ " eor %0, %0, %3\n"
-+ " eor %1, %1, %4\n"
-+ " orr %1, %0, %1\n"
-+ " mov %w0, #0\n"
-+ " cbnz %1, 1f\n"
-+ " stxp %w0, %5, %6, %2\n"
-+ "1:\n"
-+ : "=&r"(loop), "=&r"(lost), "+Q" (*(u64 *)ptr1)
-+ : "r" (old1), "r"(old2), "r"(new1), "r"(new2));
-+ } while (loop);
-+ break;
-+ default:
-+ BUILD_BUG();
-+ }
-+
-+ return !lost;
-+}
-+
-+static inline int __cmpxchg_double_mb(volatile void *ptr1, volatile void *ptr2,
-+ unsigned long old1, unsigned long old2,
-+ unsigned long new1, unsigned long new2, int size)
-+{
-+ int ret;
-+
-+ smp_mb();
-+ ret = __cmpxchg_double(ptr1, ptr2, old1, old2, new1, new2, size);
-+ smp_mb();
-+
-+ return ret;
-+}
-+
- static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
- unsigned long new, int size)
- {
-@@ -182,6 +228,31 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
- __ret; \
- })
-
-+#define cmpxchg_double(ptr1, ptr2, o1, o2, n1, n2) \
-+({\
-+ int __ret;\
-+ __ret = __cmpxchg_double_mb((ptr1), (ptr2), (unsigned long)(o1), \
-+ (unsigned long)(o2), (unsigned long)(n1), \
-+ (unsigned long)(n2), sizeof(*(ptr1)));\
-+ __ret; \
-+})
-+
-+#define cmpxchg_double_local(ptr1, ptr2, o1, o2, n1, n2) \
-+({\
-+ int __ret;\
-+ __ret = __cmpxchg_double((ptr1), (ptr2), (unsigned long)(o1), \
-+ (unsigned long)(o2), (unsigned long)(n1), \
-+ (unsigned long)(n2), sizeof(*(ptr1)));\
-+ __ret; \
-+})
-+
-+#define this_cpu_cmpxchg_8(ptr, o, n) \
-+ cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
-+
-+#define this_cpu_cmpxchg_double_8(ptr1, ptr2, o1, o2, n1, n2) \
-+ cmpxchg_double_local(raw_cpu_ptr(&(ptr1)), raw_cpu_ptr(&(ptr2)), \
-+ o1, o2, n1, n2)
-+
- #define cmpxchg64(ptr,o,n) cmpxchg((ptr),(o),(n))
- #define cmpxchg64_local(ptr,o,n) cmpxchg_local((ptr),(o),(n))
-
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
index 6f8e2ef..978f567 100644
--- a/arch/arm64/include/asm/cpu_ops.h
@@ -3212,43 +638,6 @@ index 6f8e2ef..978f567 100644
int __init cpu_read_ops(struct device_node *dn, int cpu);
void __init cpu_read_bootcpu_ops(void);
-diff --git a/arch/arm64/include/asm/dmi.h b/arch/arm64/include/asm/dmi.h
-new file mode 100644
-index 0000000..69d37d8
---- /dev/null
-+++ b/arch/arm64/include/asm/dmi.h
-@@ -0,0 +1,31 @@
-+/*
-+ * arch/arm64/include/asm/dmi.h
-+ *
-+ * Copyright (C) 2013 Linaro Limited.
-+ * Written by: Yi Li (yi.li at linaro.org)
-+ *
-+ * based on arch/ia64/include/asm/dmi.h
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#ifndef __ASM_DMI_H
-+#define __ASM_DMI_H
-+
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * According to section 2.3.6 of the UEFI spec, the firmware should not
-+ * request a virtual mapping for configuration tables such as SMBIOS.
-+ * This means we have to map them before use.
-+ */
-+#define dmi_early_remap(x, l) ioremap_cache(x, l)
-+#define dmi_early_unmap(x, l) iounmap(x)
-+#define dmi_remap(x, l) ioremap_cache(x, l)
-+#define dmi_unmap(x) iounmap(x)
-+#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
-+
-+#endif
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index 1f65be3..c0f89a0 100644
--- a/arch/arm64/include/asm/elf.h
@@ -3263,86 +652,6 @@ index 1f65be3..c0f89a0 100644
#define CORE_DUMP_USE_REGSET
#define ELF_EXEC_PAGESIZE PAGE_SIZE
-diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
-index 7fd3e27..8afb863 100644
---- a/arch/arm64/include/asm/kvm_arm.h
-+++ b/arch/arm64/include/asm/kvm_arm.h
-@@ -18,6 +18,7 @@
- #ifndef __ARM64_KVM_ARM_H__
- #define __ARM64_KVM_ARM_H__
-
-+#include <asm/memory.h>
- #include <asm/types.h>
-
- /* Hyp Configuration Register (HCR) bits */
-@@ -160,9 +161,9 @@
- #endif
-
- #define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
--#define VTTBR_BADDR_MASK (((1LLU << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
--#define VTTBR_VMID_SHIFT (48LLU)
--#define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
-+#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
-+#define VTTBR_VMID_SHIFT (UL(48))
-+#define VTTBR_VMID_MASK (UL(0xFF) << VTTBR_VMID_SHIFT)
-
- /* Hyp System Trap Register */
- #define HSTR_EL2_TTEE (1 << 16)
-@@ -185,13 +186,13 @@
-
- /* Exception Syndrome Register (ESR) bits */
- #define ESR_EL2_EC_SHIFT (26)
--#define ESR_EL2_EC (0x3fU << ESR_EL2_EC_SHIFT)
--#define ESR_EL2_IL (1U << 25)
-+#define ESR_EL2_EC (UL(0x3f) << ESR_EL2_EC_SHIFT)
-+#define ESR_EL2_IL (UL(1) << 25)
- #define ESR_EL2_ISS (ESR_EL2_IL - 1)
- #define ESR_EL2_ISV_SHIFT (24)
--#define ESR_EL2_ISV (1U << ESR_EL2_ISV_SHIFT)
-+#define ESR_EL2_ISV (UL(1) << ESR_EL2_ISV_SHIFT)
- #define ESR_EL2_SAS_SHIFT (22)
--#define ESR_EL2_SAS (3U << ESR_EL2_SAS_SHIFT)
-+#define ESR_EL2_SAS (UL(3) << ESR_EL2_SAS_SHIFT)
- #define ESR_EL2_SSE (1 << 21)
- #define ESR_EL2_SRT_SHIFT (16)
- #define ESR_EL2_SRT_MASK (0x1f << ESR_EL2_SRT_SHIFT)
-@@ -205,16 +206,16 @@
- #define ESR_EL2_FSC_TYPE (0x3c)
-
- #define ESR_EL2_CV_SHIFT (24)
--#define ESR_EL2_CV (1U << ESR_EL2_CV_SHIFT)
-+#define ESR_EL2_CV (UL(1) << ESR_EL2_CV_SHIFT)
- #define ESR_EL2_COND_SHIFT (20)
--#define ESR_EL2_COND (0xfU << ESR_EL2_COND_SHIFT)
-+#define ESR_EL2_COND (UL(0xf) << ESR_EL2_COND_SHIFT)
-
-
- #define FSC_FAULT (0x04)
- #define FSC_PERM (0x0c)
-
- /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
--#define HPFAR_MASK (~0xFUL)
-+#define HPFAR_MASK (~UL(0xf))
-
- #define ESR_EL2_EC_UNKNOWN (0x00)
- #define ESR_EL2_EC_WFI (0x01)
-diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
-index 0caf7a5..123b521 100644
---- a/arch/arm64/include/asm/kvm_mmu.h
-+++ b/arch/arm64/include/asm/kvm_mmu.h
-@@ -243,9 +243,10 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
- }
-
- static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
-- unsigned long size)
-+ unsigned long size,
-+ bool ipa_uncached)
- {
-- if (!vcpu_has_cache_enabled(vcpu))
-+ if (!vcpu_has_cache_enabled(vcpu) || ipa_uncached)
- kvm_flush_dcache_to_poc((void *)hva, size);
-
- if (!icache_is_aliasing()) { /* PIPT */
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
index 872ba93..2f287a6 100644
--- a/arch/arm64/include/asm/pci.h
@@ -3447,11 +756,11 @@ index 780f82c..3411561 100644
*/
asmlinkage void secondary_start_kernel(void);
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
-index 5bd029b..f4ba4fe 100644
+index eaa77ed..63ffe3c 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
-@@ -21,7 +21,8 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
- sys_compat.o
+@@ -23,7 +23,8 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
+ ../../arm/kernel/opcodes.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
-arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o
@@ -3460,14 +769,14 @@ index 5bd029b..f4ba4fe 100644
arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
-@@ -31,6 +32,7 @@ arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
+@@ -33,6 +34,7 @@ arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
arm64-obj-$(CONFIG_PCI) += pci.o
+arm64-obj-$(CONFIG_ACPI) += acpi.o
+ arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
obj-y += $(arm64-obj-y) vdso/
- obj-m += $(arm64-obj-m)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
new file mode 100644
index 0000000..06a96be
@@ -3902,87 +1211,14 @@ index cce9524..1d90f31 100644
{
const struct cpu_operations **ops = supported_cpu_ops;
-diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
-index d18a449..8ce9b05 100644
---- a/arch/arm64/kernel/efi-entry.S
-+++ b/arch/arm64/kernel/efi-entry.S
-@@ -61,7 +61,8 @@ ENTRY(efi_stub_entry)
- */
- mov x20, x0 // DTB address
- ldr x0, [sp, #16] // relocated _text address
-- mov x21, x0
-+ ldr x21, =stext_offset
-+ add x21, x0, x21
-
- /*
- * Calculate size of the kernel Image (same for original and copy).
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
-index 95c49eb..f9de195 100644
+index 6fac253..f9de195 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
-@@ -11,6 +11,7 @@
- *
- */
-
-+#include <linux/dmi.h>
- #include <linux/efi.h>
- #include <linux/export.h>
- #include <linux/memblock.h>
-@@ -112,8 +113,6 @@ static int __init uefi_init(void)
- efi.systab->hdr.revision & 0xffff, vendor);
-
- retval = efi_config_init(NULL);
-- if (retval == 0)
-- set_bit(EFI_CONFIG_TABLES, &efi.flags);
-
- out:
- early_memunmap(efi.systab, sizeof(efi_system_table_t));
-@@ -125,17 +124,17 @@ out:
- */
- static __init int is_reserve_region(efi_memory_desc_t *md)
- {
-- if (!is_normal_ram(md))
-+ switch (md->type) {
-+ case EFI_LOADER_CODE:
-+ case EFI_LOADER_DATA:
-+ case EFI_BOOT_SERVICES_CODE:
-+ case EFI_BOOT_SERVICES_DATA:
-+ case EFI_CONVENTIONAL_MEMORY:
- return 0;
--
-- if (md->attribute & EFI_MEMORY_RUNTIME)
-- return 1;
--
-- if (md->type == EFI_ACPI_RECLAIM_MEMORY ||
-- md->type == EFI_RESERVED_TYPE)
-- return 1;
--
-- return 0;
-+ default:
-+ break;
-+ }
-+ return is_normal_ram(md);
- }
-
- static __init void reserve_regions(void)
-@@ -471,3 +470,54 @@ err_unmap:
- return -1;
+@@ -484,3 +484,40 @@ static int __init arm64_dmi_init(void)
+ return 0;
}
- early_initcall(arm64_enter_virtual_mode);
-+
-+static int __init arm64_dmi_init(void)
-+{
-+ /*
-+ * On arm64, DMI depends on UEFI, and dmi_scan_machine() needs to
-+ * be called early because dmi_id_init(), which is an arch_initcall
-+ * itself, depends on dmi_scan_machine() having been called already.
-+ */
-+ dmi_scan_machine();
-+ if (dmi_available)
-+ dmi_set_dump_stack_arch_desc();
-+ return 0;
-+}
-+core_initcall(arm64_dmi_init);
+ core_initcall(arm64_dmi_init);
+
+/*
+ * If nothing else is handling pm_power_off, use EFI
@@ -4020,208 +1256,6 @@ index 95c49eb..f9de195 100644
+ return ret;
+}
+late_initcall(arm64_register_efi_restart);
-diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
-index 38e704e..08cafc5 100644
---- a/arch/arm64/kernel/entry-ftrace.S
-+++ b/arch/arm64/kernel/entry-ftrace.S
-@@ -98,8 +98,8 @@
- ENTRY(_mcount)
- mcount_enter
-
-- ldr x0, =ftrace_trace_function
-- ldr x2, [x0]
-+ adrp x0, ftrace_trace_function
-+ ldr x2, [x0, #:lo12:ftrace_trace_function]
- adr x0, ftrace_stub
- cmp x0, x2 // if (ftrace_trace_function
- b.eq skip_ftrace_call // != ftrace_stub) {
-@@ -115,14 +115,15 @@ skip_ftrace_call: // return;
- mcount_exit // return;
- // }
- skip_ftrace_call:
-- ldr x1, =ftrace_graph_return
-- ldr x2, [x1] // if ((ftrace_graph_return
-- cmp x0, x2 // != ftrace_stub)
-- b.ne ftrace_graph_caller
--
-- ldr x1, =ftrace_graph_entry // || (ftrace_graph_entry
-- ldr x2, [x1] // != ftrace_graph_entry_stub))
-- ldr x0, =ftrace_graph_entry_stub
-+ adrp x1, ftrace_graph_return
-+ ldr x2, [x1, #:lo12:ftrace_graph_return]
-+ cmp x0, x2 // if ((ftrace_graph_return
-+ b.ne ftrace_graph_caller // != ftrace_stub)
-+
-+ adrp x1, ftrace_graph_entry // || (ftrace_graph_entry
-+ adrp x0, ftrace_graph_entry_stub // != ftrace_graph_entry_stub))
-+ ldr x2, [x1, #:lo12:ftrace_graph_entry]
-+ add x0, x0, #:lo12:ftrace_graph_entry_stub
- cmp x0, x2
- b.ne ftrace_graph_caller // ftrace_graph_caller();
-
-diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
-index 0a6e4f9..5a76e3a 100644
---- a/arch/arm64/kernel/head.S
-+++ b/arch/arm64/kernel/head.S
-@@ -132,6 +132,8 @@ efi_head:
- #endif
-
- #ifdef CONFIG_EFI
-+ .globl stext_offset
-+ .set stext_offset, stext - efi_head
- .align 3
- pe_header:
- .ascii "PE"
-@@ -155,12 +157,12 @@ optional_header:
- .long 0 // SizeOfInitializedData
- .long 0 // SizeOfUninitializedData
- .long efi_stub_entry - efi_head // AddressOfEntryPoint
-- .long stext - efi_head // BaseOfCode
-+ .long stext_offset // BaseOfCode
-
- extra_header_fields:
- .quad 0 // ImageBase
-- .long 0x20 // SectionAlignment
-- .long 0x8 // FileAlignment
-+ .long 0x1000 // SectionAlignment
-+ .long PECOFF_FILE_ALIGNMENT // FileAlignment
- .short 0 // MajorOperatingSystemVersion
- .short 0 // MinorOperatingSystemVersion
- .short 0 // MajorImageVersion
-@@ -172,7 +174,7 @@ extra_header_fields:
- .long _end - efi_head // SizeOfImage
-
- // Everything before the kernel image is considered part of the header
-- .long stext - efi_head // SizeOfHeaders
-+ .long stext_offset // SizeOfHeaders
- .long 0 // CheckSum
- .short 0xa // Subsystem (EFI application)
- .short 0 // DllCharacteristics
-@@ -217,16 +219,24 @@ section_table:
- .byte 0
- .byte 0 // end of 0 padding of section name
- .long _end - stext // VirtualSize
-- .long stext - efi_head // VirtualAddress
-+ .long stext_offset // VirtualAddress
- .long _edata - stext // SizeOfRawData
-- .long stext - efi_head // PointerToRawData
-+ .long stext_offset // PointerToRawData
-
- .long 0 // PointerToRelocations (0 for executables)
- .long 0 // PointerToLineNumbers (0 for executables)
- .short 0 // NumberOfRelocations (0 for executables)
- .short 0 // NumberOfLineNumbers (0 for executables)
- .long 0xe0500020 // Characteristics (section flags)
-- .align 5
-+
-+ /*
-+ * EFI will load stext onwards at the 4k section alignment
-+ * described in the PE/COFF header. To ensure that instruction
-+ * sequences using an adrp and a :lo12: immediate will function
-+ * correctly at this alignment, we must ensure that stext is
-+ * placed at a 4k boundary in the Image to begin with.
-+ */
-+ .align 12
- #endif
-
- ENTRY(stext)
-diff --git a/arch/arm64/kernel/io.c b/arch/arm64/kernel/io.c
-index 7d37ead..354be2a 100644
---- a/arch/arm64/kernel/io.c
-+++ b/arch/arm64/kernel/io.c
-@@ -25,12 +25,26 @@
- */
- void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
- {
-- unsigned char *t = to;
-- while (count) {
-+ while (count && (!IS_ALIGNED((unsigned long)from, 8) ||
-+ !IS_ALIGNED((unsigned long)to, 8))) {
-+ *(u8 *)to = __raw_readb(from);
-+ from++;
-+ to++;
- count--;
-- *t = readb(from);
-- t++;
-+ }
-+
-+ while (count >= 8) {
-+ *(u64 *)to = __raw_readq(from);
-+ from += 8;
-+ to += 8;
-+ count -= 8;
-+ }
-+
-+ while (count) {
-+ *(u8 *)to = __raw_readb(from);
- from++;
-+ to++;
-+ count--;
- }
- }
- EXPORT_SYMBOL(__memcpy_fromio);
-@@ -40,12 +54,26 @@ EXPORT_SYMBOL(__memcpy_fromio);
- */
- void __memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
- {
-- const unsigned char *f = from;
-- while (count) {
-+ while (count && (!IS_ALIGNED((unsigned long)to, 8) ||
-+ !IS_ALIGNED((unsigned long)from, 8))) {
-+ __raw_writeb(*(volatile u8 *)from, to);
-+ from++;
-+ to++;
- count--;
-- writeb(*f, to);
-- f++;
-+ }
-+
-+ while (count >= 8) {
-+ __raw_writeq(*(volatile u64 *)from, to);
-+ from += 8;
-+ to += 8;
-+ count -= 8;
-+ }
-+
-+ while (count) {
-+ __raw_writeb(*(volatile u8 *)from, to);
-+ from++;
- to++;
-+ count--;
- }
- }
- EXPORT_SYMBOL(__memcpy_toio);
-@@ -55,10 +83,28 @@ EXPORT_SYMBOL(__memcpy_toio);
- */
- void __memset_io(volatile void __iomem *dst, int c, size_t count)
- {
-- while (count) {
-+ u64 qc = (u8)c;
-+
-+ qc |= qc << 8;
-+ qc |= qc << 16;
-+ qc |= qc << 32;
-+
-+ while (count && !IS_ALIGNED((unsigned long)dst, 8)) {
-+ __raw_writeb(c, dst);
-+ dst++;
- count--;
-- writeb(c, dst);
-+ }
-+
-+ while (count >= 8) {
-+ __raw_writeq(qc, dst);
-+ dst += 8;
-+ count -= 8;
-+ }
-+
-+ while (count) {
-+ __raw_writeb(c, dst);
- dst++;
-+ count--;
- }
- }
- EXPORT_SYMBOL(__memset_io);
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index ce5836c..978cd21 100644
--- a/arch/arm64/kernel/pci.c
@@ -4351,7 +1385,7 @@ index ce5836c..978cd21 100644
+ */
+fs_initcall(pcibios_assign_resources);
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
-index 663da77..2d0deda 100644
+index f1dbca7..dbb3945 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -15,6 +15,7 @@
@@ -4475,7 +1509,7 @@ index 663da77..2d0deda 100644
static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu)
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
-index 2437196..914287d 100644
+index 20fe2932ad0c..cf4ab5661088 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -43,6 +43,7 @@
@@ -4486,7 +1520,7 @@ index 2437196..914287d 100644
#include <linux/personality.h>
#include <asm/fixmap.h>
-@@ -59,6 +60,7 @@
+@@ -61,6 +62,7 @@
#include <asm/memblock.h>
#include <asm/psci.h>
#include <asm/efi.h>
@@ -4494,33 +1528,8 @@ index 2437196..914287d 100644
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
-@@ -116,12 +118,16 @@ void __init early_print(const char *str, ...)
-
- void __init smp_setup_processor_id(void)
- {
-+ u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
-+ cpu_logical_map(0) = mpidr;
-+
- /*
- * clear __my_cpu_offset on boot CPU to avoid hang caused by
- * using percpu variable early, for example, lockdep will
- * access percpu variable inside lock_release
- */
- set_my_cpu_offset(0);
-+ pr_info("Booting Linux on physical CPU 0x%lx\n", (unsigned long)mpidr);
- }
-
- bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
-@@ -312,6 +318,7 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
- while (true)
- cpu_relax();
- }
-+ dump_stack_set_arch_desc("%s (DT)", of_flat_dt_get_machine_name());
- }
-
- /*
-@@ -378,6 +385,8 @@ void __init setup_arch(char **cmdline_p)
-
+@@ -387,6 +389,8 @@ void __init setup_arch(char **cmdline_p)
+ early_fixmap_init();
early_ioremap_init();
+ disable_acpi();
@@ -4528,7 +1537,7 @@ index 2437196..914287d 100644
parse_early_param();
/*
-@@ -397,20 +397,28 @@ void __init setup_arch(char **cmdline_p)
+@@ -398,19 +402,29 @@ void __init setup_arch(char **cmdline_p)
efi_init();
arm64_memblock_init();
@@ -4539,7 +1548,7 @@ index 2437196..914287d 100644
request_standard_resources();
efi_idmap_init();
- early_ioremap_reset();
+ early_ioremap_reset();
- unflatten_device_tree();
-
@@ -4556,14 +1565,13 @@ index 2437196..914287d 100644
+ acpi_smp_init_cpus();
+ }
-- cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
-- cpu_read_bootcpu_ops();
+ cpu_read_bootcpu_ops();
#ifdef CONFIG_SMP
- smp_init_cpus();
smp_build_mpidr_hash();
#endif
-@@ -506,3 +523,25 @@ const struct seq_operations cpuinfo_op = {
+@@ -565,3 +579,25 @@ const struct seq_operations cpuinfo_op = {
.stop = c_stop,
.show = c_show
};
@@ -4590,10 +1598,10 @@ index 2437196..914287d 100644
+}
+early_initcall(arm64_console_setup);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
-index b06d1d9..2988829 100644
+index 7ae6ee0..5aaf5a4 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
-@@ -321,7 +321,7 @@ void __init smp_prepare_boot_cpu(void)
+@@ -323,7 +323,7 @@ void __init smp_prepare_boot_cpu(void)
* cpu logical map array containing MPIDR values related to logical
* cpus. Assumes that cpu_logical_map(0) has already been initialized.
*/
@@ -4743,58 +1751,6 @@ index 1a7125c..42f9195 100644
arch_timer_rate = arch_timer_get_rate();
if (!arch_timer_rate)
panic("Unable to initialise architected timer.\n");
-diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
-index edf8715..4596f46 100644
---- a/arch/arm64/kernel/vmlinux.lds.S
-+++ b/arch/arm64/kernel/vmlinux.lds.S
-@@ -32,6 +32,22 @@ jiffies = jiffies_64;
- *(.hyp.text) \
- VMLINUX_SYMBOL(__hyp_text_end) = .;
-
-+/*
-+ * The size of the PE/COFF section that covers the kernel image, which
-+ * runs from stext to _edata, must be a round multiple of the PE/COFF
-+ * FileAlignment, which we set to its minimum value of 0x200. 'stext'
-+ * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
-+ * boundary should be sufficient.
-+ */
-+PECOFF_FILE_ALIGNMENT = 0x200;
-+
-+#ifdef CONFIG_EFI
-+#define PECOFF_EDATA_PADDING \
-+ .pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
-+#else
-+#define PECOFF_EDATA_PADDING
-+#endif
-+
- SECTIONS
- {
- /*
-@@ -103,6 +119,7 @@ SECTIONS
- _data = .;
- _sdata = .;
- RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
-+ PECOFF_EDATA_PADDING
- _edata = .;
-
- BSS_SECTION(0, 0, 0)
-diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
-index b72aa9f..fbe909f 100644
---- a/arch/arm64/kvm/hyp.S
-+++ b/arch/arm64/kvm/hyp.S
-@@ -761,10 +761,10 @@
- .macro activate_traps
- ldr x2, [x0, #VCPU_HCR_EL2]
- msr hcr_el2, x2
-- ldr x2, =(CPTR_EL2_TTA)
-+ mov x2, #CPTR_EL2_TTA
- msr cptr_el2, x2
-
-- ldr x2, =(1 << 15) // Trap CP15 Cr=15
-+ mov x2, #(1 << 15) // Trap CP15 Cr=15
- msr hstr_el2, x2
-
- mrs x2, mdcr_el2
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index d920942..cf890e3 100644
--- a/arch/arm64/mm/dma-mapping.c
@@ -5705,7 +2661,7 @@ index 0000000..0166475
+
+#endif /* CONFIG_ACPI */
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
-index b23fe37..555e226 100644
+index 8951cef..63aa47c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -5,8 +5,7 @@
@@ -5736,7 +2692,7 @@ index b23fe37..555e226 100644
help
This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
-index c3b2fcb..5a21476 100644
+index f74317c..c346011 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -23,7 +23,11 @@ acpi-y += nvs.o
@@ -5760,14 +2716,6 @@ index c3b2fcb..5a21476 100644
acpi-y += acpi_lpss.o
acpi-y += acpi_platform.o
acpi-y += acpi_pnp.o
-@@ -47,6 +51,7 @@ acpi-y += int340x_thermal.o
- acpi-y += power.o
- acpi-y += event.o
- acpi-y += sysfs.o
-+acpi-y += property.o
- acpi-$(CONFIG_X86) += acpi_cmos_rtc.o
- acpi-$(CONFIG_DEBUG_FS) += debugfs.o
- acpi-$(CONFIG_ACPI_NUMA) += numa.o
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 8b67bd0..c412fdb 100644
--- a/drivers/acpi/bus.c
@@ -5783,7 +2731,7 @@ index 8b67bd0..c412fdb 100644
message = "platform specific model";
break;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
-index 447f6d6..c5ff8ba 100644
+index 163e82f..c5ff8ba 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -26,8 +26,13 @@
@@ -5800,19 +2748,8 @@ index 447f6d6..c5ff8ba 100644
void acpi_processor_init(void);
void acpi_platform_init(void);
void acpi_pnp_init(void);
-@@ -173,4 +178,10 @@ static inline void suspend_nvs_restore(void) {}
- bool acpi_osi_is_win8(void);
- #endif
-
-+/*--------------------------------------------------------------------------
-+ Device properties
-+ -------------------------------------------------------------------------- */
-+void acpi_init_properties(struct acpi_device *adev);
-+void acpi_free_properties(struct acpi_device *adev);
-+
- #endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
-index 9964f70..5c480d5 100644
+index f9eeae8..581b9f7 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -336,11 +336,11 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
@@ -5831,7 +2768,7 @@ index 9964f70..5c480d5 100644
static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz)
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
-index ef58f46..5c84e0d 100644
+index 342942f..734c029 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -64,6 +64,38 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
@@ -5875,2897 +2812,487 @@ index ef58f46..5c84e0d 100644
unsigned long madt_end, entry;
@@ -99,6 +131,9 @@ static int map_madt_entry(int type, u32 acpi_id)
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
- if (!map_lsapic_id(header, type, acpi_id, &apic_id))
+ if (!map_lsapic_id(header, type, acpi_id, &phys_id))
break;
+ } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
-+ if (!map_gicc_mpidr(header, type, acpi_id, &apic_id))
++ if (!map_gicc_mpidr(header, type, acpi_id, &phys_id))
+ break;
}
entry += header->length;
}
@@ -131,6 +166,8 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
- map_lsapic_id(header, type, acpi_id, &apic_id);
- } else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
- map_x2apic_id(header, type, acpi_id, &apic_id);
-+ } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
-+ map_gicc_mpidr(header, type, acpi_id, &apic_id);
- }
+ map_lsapic_id(header, type, acpi_id, &phys_id);
+ else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
+ map_x2apic_id(header, type, acpi_id, &phys_id);
++ else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT)
++ map_gicc_mpidr(header, type, acpi_id, &phys_id);
exit:
-diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
+ kfree(buffer.pointer);
+diff --git a/drivers/acpi/sleep-arm.c b/drivers/acpi/sleep-arm.c
new file mode 100644
-index 0000000..0d08373
+index 0000000..54578ef
--- /dev/null
-+++ b/drivers/acpi/property.c
-@@ -0,0 +1,551 @@
++++ b/drivers/acpi/sleep-arm.c
+@@ -0,0 +1,28 @@
+/*
-+ * ACPI device specific properties support.
-+ *
-+ * Copyright (C) 2014, Intel Corporation
-+ * All rights reserved.
++ * ARM64 Specific Sleep Functionality
+ *
-+ * Authors: Mika Westerberg <mika.westerberg at linux.intel.com>
-+ * Darren Hart <dvhart at linux.intel.com>
-+ * Rafael J. Wysocki <rafael.j.wysocki at intel.com>
++ * Copyright (C) 2013-2014, Linaro Ltd.
++ * Author: Graeme Gregory <graeme.gregory at linaro.org>
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
-+#include <linux/device.h>
-+#include <linux/export.h>
-+
-+#include "internal.h"
+
-+/* ACPI _DSD device properties UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */
-+static const u8 prp_uuid[16] = {
-+ 0x14, 0xd8, 0xff, 0xda, 0xba, 0x6e, 0x8c, 0x4d,
-+ 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01
-+};
-+
-+static bool acpi_property_value_ok(const union acpi_object *value)
++/*
++ * Currently the ACPI 5.1 standard does not define S states in a
++ * manner which is usable for ARM64. These two stubs are sufficient
++ * that system initialises and device PM works.
++ */
++u32 acpi_target_system_state(void)
+{
-+ int j;
-+
-+ /*
-+ * The value must be an integer, a string, a reference, or a package
-+ * whose every element must be an integer, a string, or a reference.
-+ */
-+ switch (value->type) {
-+ case ACPI_TYPE_INTEGER:
-+ case ACPI_TYPE_STRING:
-+ case ACPI_TYPE_LOCAL_REFERENCE:
-+ return true;
-+
-+ case ACPI_TYPE_PACKAGE:
-+ for (j = 0; j < value->package.count; j++)
-+ switch (value->package.elements[j].type) {
-+ case ACPI_TYPE_INTEGER:
-+ case ACPI_TYPE_STRING:
-+ case ACPI_TYPE_LOCAL_REFERENCE:
-+ continue;
-+
-+ default:
-+ return false;
-+ }
-+
-+ return true;
-+ }
-+ return false;
++ return ACPI_STATE_S0;
+}
++EXPORT_SYMBOL_GPL(acpi_target_system_state);
+
-+static bool acpi_properties_format_valid(const union acpi_object *properties)
++int __init acpi_sleep_init(void)
+{
-+ int i;
-+
-+ for (i = 0; i < properties->package.count; i++) {
-+ const union acpi_object *property;
-+
-+ property = &properties->package.elements[i];
-+ /*
-+ * Only two elements allowed, the first one must be a string and
-+ * the second one has to satisfy certain conditions.
-+ */
-+ if (property->package.count != 2
-+ || property->package.elements[0].type != ACPI_TYPE_STRING
-+ || !acpi_property_value_ok(&property->package.elements[1]))
-+ return false;
-+ }
-+ return true;
++ return -ENOSYS;
+}
+diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
+index 93b8152..122b48f 100644
+--- a/drivers/acpi/tables.c
++++ b/drivers/acpi/tables.c
+@@ -183,6 +183,49 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
+ }
+ break;
+
++ case ACPI_MADT_TYPE_GENERIC_INTERRUPT:
++ {
++ struct acpi_madt_generic_interrupt *p =
++ (struct acpi_madt_generic_interrupt *)header;
++ pr_info("GICC (acpi_id[0x%04x] address[%p] MPDIR[0x%llx] %s)\n",
++ p->uid, (void *)(unsigned long)p->base_address,
++ p->arm_mpidr,
++ (p->flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
+
-+static void acpi_init_of_compatible(struct acpi_device *adev)
-+{
-+ const union acpi_object *of_compatible;
-+ struct acpi_hardware_id *hwid;
-+ bool acpi_of = false;
-+ int ret;
-+
-+ /*
-+ * Check if the special PRP0001 ACPI ID is present and in that
-+ * case we fill in Device Tree compatible properties for this
-+ * device.
-+ */
-+ list_for_each_entry(hwid, &adev->pnp.ids, list) {
-+ if (!strcmp(hwid->id, "PRP0001")) {
-+ acpi_of = true;
-+ break;
+ }
-+ }
-+
-+ if (!acpi_of)
-+ return;
-+
-+ ret = acpi_dev_get_property_array(adev, "compatible", ACPI_TYPE_STRING,
-+ &of_compatible);
-+ if (ret) {
-+ ret = acpi_dev_get_property(adev, "compatible",
-+ ACPI_TYPE_STRING, &of_compatible);
-+ if (ret) {
-+ acpi_handle_warn(adev->handle,
-+ "PRP0001 requires compatible property\n");
-+ return;
-+ }
-+ }
-+ adev->data.of_compatible = of_compatible;
-+}
-+
-+void acpi_init_properties(struct acpi_device *adev)
-+{
-+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
-+ const union acpi_object *desc;
-+ acpi_status status;
-+ int i;
-+
-+ status = acpi_evaluate_object_typed(adev->handle, "_DSD", NULL, &buf,
-+ ACPI_TYPE_PACKAGE);
-+ if (ACPI_FAILURE(status))
-+ return;
-+
-+ desc = buf.pointer;
-+ if (desc->package.count % 2)
-+ goto fail;
-+
-+ /* Look for the device properties UUID. */
-+ for (i = 0; i < desc->package.count; i += 2) {
-+ const union acpi_object *uuid, *properties;
-+
-+ uuid = &desc->package.elements[i];
-+ properties = &desc->package.elements[i + 1];
-+
-+ /*
-+ * The first element must be a UUID and the second one must be
-+ * a package.
-+ */
-+ if (uuid->type != ACPI_TYPE_BUFFER || uuid->buffer.length != 16
-+ || properties->type != ACPI_TYPE_PACKAGE)
-+ break;
-+
-+ if (memcmp(uuid->buffer.pointer, prp_uuid, sizeof(prp_uuid)))
-+ continue;
-+
-+ /*
-+ * We found the matching UUID. Now validate the format of the
-+ * package immediately following it.
-+ */
-+ if (!acpi_properties_format_valid(properties))
-+ break;
-+
-+ adev->data.pointer = buf.pointer;
-+ adev->data.properties = properties;
-+
-+ acpi_init_of_compatible(adev);
-+ return;
-+ }
-+
-+ fail:
-+ dev_warn(&adev->dev, "Returned _DSD data is not valid, skipping\n");
-+ ACPI_FREE(buf.pointer);
-+}
-+
-+void acpi_free_properties(struct acpi_device *adev)
-+{
-+ ACPI_FREE((void *)adev->data.pointer);
-+ adev->data.of_compatible = NULL;
-+ adev->data.pointer = NULL;
-+ adev->data.properties = NULL;
-+}
-+
-+/**
-+ * acpi_dev_get_property - return an ACPI property with given name
-+ * @adev: ACPI device to get property
-+ * @name: Name of the property
-+ * @type: Expected property type
-+ * @obj: Location to store the property value (if not %NULL)
-+ *
-+ * Look up a property with @name and store a pointer to the resulting ACPI
-+ * object at the location pointed to by @obj if found.
-+ *
-+ * Callers must not attempt to free the returned objects. These objects will be
-+ * freed by the ACPI core automatically during the removal of @adev.
-+ *
-+ * Return: %0 if property with @name has been found (success),
-+ * %-EINVAL if the arguments are invalid,
-+ * %-ENODATA if the property doesn't exist,
-+ * %-EPROTO if the property value type doesn't match @type.
-+ */
-+int acpi_dev_get_property(struct acpi_device *adev, const char *name,
-+ acpi_object_type type, const union acpi_object **obj)
-+{
-+ const union acpi_object *properties;
-+ int i;
-+
-+ if (!adev || !name)
-+ return -EINVAL;
-+
-+ if (!adev->data.pointer || !adev->data.properties)
-+ return -ENODATA;
-+
-+ properties = adev->data.properties;
-+ for (i = 0; i < properties->package.count; i++) {
-+ const union acpi_object *propname, *propvalue;
-+ const union acpi_object *property;
-+
-+ property = &properties->package.elements[i];
-+
-+ propname = &property->package.elements[0];
-+ propvalue = &property->package.elements[1];
-+
-+ if (!strcmp(name, propname->string.pointer)) {
-+ if (type != ACPI_TYPE_ANY && propvalue->type != type)
-+ return -EPROTO;
-+ else if (obj)
-+ *obj = propvalue;
-+
-+ return 0;
-+ }
-+ }
-+ return -ENODATA;
-+}
-+EXPORT_SYMBOL_GPL(acpi_dev_get_property);
-+
-+/**
-+ * acpi_dev_get_property_array - return an ACPI array property with given name
-+ * @adev: ACPI device to get property
-+ * @name: Name of the property
-+ * @type: Expected type of array elements
-+ * @obj: Location to store a pointer to the property value (if not NULL)
-+ *
-+ * Look up an array property with @name and store a pointer to the resulting
-+ * ACPI object at the location pointed to by @obj if found.
-+ *
-+ * Callers must not attempt to free the returned objects. Those objects will be
-+ * freed by the ACPI core automatically during the removal of @adev.
-+ *
-+ * Return: %0 if array property (package) with @name has been found (success),
-+ * %-EINVAL if the arguments are invalid,
-+ * %-ENODATA if the property doesn't exist,
-+ * %-EPROTO if the property is not a package or the type of its elements
-+ * doesn't match @type.
-+ */
-+int acpi_dev_get_property_array(struct acpi_device *adev, const char *name,
-+ acpi_object_type type,
-+ const union acpi_object **obj)
-+{
-+ const union acpi_object *prop;
-+ int ret, i;
-+
-+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_PACKAGE, &prop);
-+ if (ret)
-+ return ret;
-+
-+ if (type != ACPI_TYPE_ANY) {
-+ /* Check that all elements are of correct type. */
-+ for (i = 0; i < prop->package.count; i++)
-+ if (prop->package.elements[i].type != type)
-+ return -EPROTO;
-+ }
-+ if (obj)
-+ *obj = prop;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(acpi_dev_get_property_array);
-+
-+/**
-+ * acpi_dev_get_property_reference - returns handle to the referenced object
-+ * @adev: ACPI device to get property
-+ * @name: Name of the property
-+ * @index: Index of the reference to return
-+ * @args: Location to store the returned reference with optional arguments
-+ *
-+ * Find property with @name, verifify that it is a package containing at least
-+ * one object reference and if so, store the ACPI device object pointer to the
-+ * target object in @args->adev. If the reference includes arguments, store
-+ * them in the @args->args[] array.
-+ *
-+ * If there's more than one reference in the property value package, @index is
-+ * used to select the one to return.
-+ *
-+ * Return: %0 on success, negative error code on failure.
-+ */
-+int acpi_dev_get_property_reference(struct acpi_device *adev,
-+ const char *name, size_t index,
-+ struct acpi_reference_args *args)
-+{
-+ const union acpi_object *element, *end;
-+ const union acpi_object *obj;
-+ struct acpi_device *device;
-+ int ret, idx = 0;
-+
-+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_ANY, &obj);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * The simplest case is when the value is a single reference. Just
-+ * return that reference then.
-+ */
-+ if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) {
-+ if (index)
-+ return -EINVAL;
-+
-+ ret = acpi_bus_get_device(obj->reference.handle, &device);
-+ if (ret)
-+ return ret;
-+
-+ args->adev = device;
-+ args->nargs = 0;
-+ return 0;
-+ }
-+
-+ /*
-+ * If it is not a single reference, then it is a package of
-+ * references followed by number of ints as follows:
-+ *
-+ * Package () { REF, INT, REF, INT, INT }
-+ *
-+ * The index argument is then used to determine which reference
-+ * the caller wants (along with the arguments).
-+ */
-+ if (obj->type != ACPI_TYPE_PACKAGE || index >= obj->package.count)
-+ return -EPROTO;
-+
-+ element = obj->package.elements;
-+ end = element + obj->package.count;
-+
-+ while (element < end) {
-+ u32 nargs, i;
-+
-+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
-+ return -EPROTO;
-+
-+ ret = acpi_bus_get_device(element->reference.handle, &device);
-+ if (ret)
-+ return -ENODEV;
-+
-+ element++;
-+ nargs = 0;
-+
-+ /* assume following integer elements are all args */
-+ for (i = 0; element + i < end; i++) {
-+ int type = element[i].type;
-+
-+ if (type == ACPI_TYPE_INTEGER)
-+ nargs++;
-+ else if (type == ACPI_TYPE_LOCAL_REFERENCE)
-+ break;
-+ else
-+ return -EPROTO;
-+ }
-+
-+ if (idx++ == index) {
-+ args->adev = device;
-+ args->nargs = nargs;
-+ for (i = 0; i < nargs; i++)
-+ args->args[i] = element[i].integer.value;
++ break;
+
-+ return 0;
++ case ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR:
++ {
++ struct acpi_madt_generic_distributor *p =
++ (struct acpi_madt_generic_distributor *)header;
++ pr_info("GIC Distributor (gic_id[0x%04x] address[%p] gsi_base[%d])\n",
++ p->gic_id,
++ (void *)(unsigned long)p->base_address,
++ p->global_irq_base);
+ }
++ break;
+
-+ element += nargs;
-+ }
-+
-+ return -EPROTO;
-+}
-+EXPORT_SYMBOL_GPL(acpi_dev_get_property_reference);
-+
-+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
-+ void **valptr)
-+{
-+ return acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
-+ (const union acpi_object **)valptr);
-+}
-+
-+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
-+ enum dev_prop_type proptype, void *val)
-+{
-+ const union acpi_object *obj;
-+ int ret;
-+
-+ if (!val)
-+ return -EINVAL;
-+
-+ if (proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64) {
-+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_INTEGER, &obj);
-+ if (ret)
-+ return ret;
-+
-+ switch (proptype) {
-+ case DEV_PROP_U8:
-+ if (obj->integer.value > U8_MAX)
-+ return -EOVERFLOW;
-+ *(u8 *)val = obj->integer.value;
-+ break;
-+ case DEV_PROP_U16:
-+ if (obj->integer.value > U16_MAX)
-+ return -EOVERFLOW;
-+ *(u16 *)val = obj->integer.value;
-+ break;
-+ case DEV_PROP_U32:
-+ if (obj->integer.value > U32_MAX)
-+ return -EOVERFLOW;
-+ *(u32 *)val = obj->integer.value;
-+ break;
-+ default:
-+ *(u64 *)val = obj->integer.value;
-+ break;
++ case ACPI_MADT_TYPE_GENERIC_MSI_FRAME:
++ {
++ struct acpi_madt_generic_msi_frame *p =
++ (struct acpi_madt_generic_msi_frame *)header;
++ pr_info("GIC MSI Frame (msi_fame_id[%d] address[%p])\n",
++ p->msi_frame_id,
++ (void *)(unsigned long)p->base_address);
+ }
-+ } else if (proptype == DEV_PROP_STRING) {
-+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_STRING, &obj);
-+ if (ret)
-+ return ret;
-+
-+ *(char **)val = obj->string.pointer;
-+ } else {
-+ ret = -EINVAL;
-+ }
-+ return ret;
-+}
-+
-+static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val,
-+ size_t nval)
-+{
-+ int i;
-+
-+ for (i = 0; i < nval; i++) {
-+ if (items[i].type != ACPI_TYPE_INTEGER)
-+ return -EPROTO;
-+ if (items[i].integer.value > U8_MAX)
-+ return -EOVERFLOW;
-+
-+ val[i] = items[i].integer.value;
-+ }
-+ return 0;
-+}
-+
-+static int acpi_copy_property_array_u16(const union acpi_object *items,
-+ u16 *val, size_t nval)
-+{
-+ int i;
-+
-+ for (i = 0; i < nval; i++) {
-+ if (items[i].type != ACPI_TYPE_INTEGER)
-+ return -EPROTO;
-+ if (items[i].integer.value > U16_MAX)
-+ return -EOVERFLOW;
-+
-+ val[i] = items[i].integer.value;
-+ }
-+ return 0;
-+}
-+
-+static int acpi_copy_property_array_u32(const union acpi_object *items,
-+ u32 *val, size_t nval)
-+{
-+ int i;
-+
-+ for (i = 0; i < nval; i++) {
-+ if (items[i].type != ACPI_TYPE_INTEGER)
-+ return -EPROTO;
-+ if (items[i].integer.value > U32_MAX)
-+ return -EOVERFLOW;
-+
-+ val[i] = items[i].integer.value;
-+ }
-+ return 0;
-+}
-+
-+static int acpi_copy_property_array_u64(const union acpi_object *items,
-+ u64 *val, size_t nval)
-+{
-+ int i;
-+
-+ for (i = 0; i < nval; i++) {
-+ if (items[i].type != ACPI_TYPE_INTEGER)
-+ return -EPROTO;
-+
-+ val[i] = items[i].integer.value;
-+ }
-+ return 0;
-+}
-+
-+static int acpi_copy_property_array_string(const union acpi_object *items,
-+ char **val, size_t nval)
-+{
-+ int i;
-+
-+ for (i = 0; i < nval; i++) {
-+ if (items[i].type != ACPI_TYPE_STRING)
-+ return -EPROTO;
-+
-+ val[i] = items[i].string.pointer;
-+ }
-+ return 0;
-+}
-+
-+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
-+ enum dev_prop_type proptype, void *val, size_t nval)
-+{
-+ const union acpi_object *obj;
-+ const union acpi_object *items;
-+ int ret;
-+
-+ if (val && nval == 1) {
-+ ret = acpi_dev_prop_read_single(adev, propname, proptype, val);
-+ if (!ret)
-+ return ret;
-+ }
-+
-+ ret = acpi_dev_get_property_array(adev, propname, ACPI_TYPE_ANY, &obj);
-+ if (ret)
-+ return ret;
-+
-+ if (!val)
-+ return obj->package.count;
-+ else if (nval <= 0)
-+ return -EINVAL;
-+
-+ if (nval > obj->package.count)
-+ return -EOVERFLOW;
-+
-+ items = obj->package.elements;
-+ switch (proptype) {
-+ case DEV_PROP_U8:
-+ ret = acpi_copy_property_array_u8(items, (u8 *)val, nval);
-+ break;
-+ case DEV_PROP_U16:
-+ ret = acpi_copy_property_array_u16(items, (u16 *)val, nval);
-+ break;
-+ case DEV_PROP_U32:
-+ ret = acpi_copy_property_array_u32(items, (u32 *)val, nval);
-+ break;
-+ case DEV_PROP_U64:
-+ ret = acpi_copy_property_array_u64(items, (u64 *)val, nval);
-+ break;
-+ case DEV_PROP_STRING:
-+ ret = acpi_copy_property_array_string(items, (char **)val, nval);
+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+ return ret;
-+}
-diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
-index 0476e90..9cb5cca 100644
---- a/drivers/acpi/scan.c
-+++ b/drivers/acpi/scan.c
-@@ -124,17 +124,56 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias,
- if (list_empty(&acpi_dev->pnp.ids))
- return 0;
-
-- len = snprintf(modalias, size, "acpi:");
-- size -= len;
--
-- list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
-- count = snprintf(&modalias[len], size, "%s:", id->id);
-- if (count < 0)
-- return -EINVAL;
-- if (count >= size)
-- return -ENOMEM;
-- len += count;
-- size -= count;
-+ /*
-+ * If the device has PRP0001 we expose DT compatible modalias
-+ * instead in form of of:NnameTCcompatible.
-+ */
-+ if (acpi_dev->data.of_compatible) {
-+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
-+ const union acpi_object *of_compatible, *obj;
-+ int i, nval;
-+ char *c;
-+
-+ acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
-+ /* DT strings are all in lower case */
-+ for (c = buf.pointer; *c != '\0'; c++)
-+ *c = tolower(*c);
-+
-+ len = snprintf(modalias, size, "of:N%sT", (char *)buf.pointer);
-+ ACPI_FREE(buf.pointer);
-+
-+ of_compatible = acpi_dev->data.of_compatible;
-+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
-+ nval = of_compatible->package.count;
-+ obj = of_compatible->package.elements;
-+ } else { /* Must be ACPI_TYPE_STRING. */
-+ nval = 1;
-+ obj = of_compatible;
-+ }
-+ for (i = 0; i < nval; i++, obj++) {
-+ count = snprintf(&modalias[len], size, "C%s",
-+ obj->string.pointer);
-+ if (count < 0)
-+ return -EINVAL;
-+ if (count >= size)
-+ return -ENOMEM;
+
-+ len += count;
-+ size -= count;
++ case ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR:
++ {
++ struct acpi_madt_generic_redistributor *p =
++ (struct acpi_madt_generic_redistributor *)header;
++ pr_info("GIC Redistributor (address[%p] region_size[0x%x])\n",
++ (void *)(unsigned long)p->base_address,
++ p->length);
+ }
-+ } else {
-+ len = snprintf(modalias, size, "acpi:");
-+ size -= len;
++ break;
+
-+ list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
-+ count = snprintf(&modalias[len], size, "%s:", id->id);
-+ if (count < 0)
-+ return -EINVAL;
-+ if (count >= size)
-+ return -ENOMEM;
-+ len += count;
-+ size -= count;
-+ }
+ default:
+ pr_warn("Found unsupported MADT entry (type = 0x%x)\n",
+ header->type);
+@@ -210,7 +253,7 @@ acpi_parse_entries(char *id, unsigned long table_size,
+ return -EINVAL;
+
+ if (!table_header) {
+- pr_warn("%4.4s not present\n", id);
++ pr_warn("Table header not present\n");
+ return -ENODEV;
}
- modalias[len] = '\0';
-@@ -902,6 +941,51 @@ int acpi_match_device_ids(struct acpi_device *device,
- }
- EXPORT_SYMBOL(acpi_match_device_ids);
+@@ -246,7 +289,8 @@ acpi_parse_entries(char *id, unsigned long table_size,
-+/* Performs match against special "PRP0001" shoehorn ACPI ID */
-+static bool acpi_of_driver_match_device(struct device *dev,
-+ const struct device_driver *drv)
-+{
-+ const union acpi_object *of_compatible, *obj;
-+ struct acpi_device *adev;
-+ int i, nval;
-+
-+ adev = ACPI_COMPANION(dev);
-+ if (!adev)
-+ return false;
-+
-+ of_compatible = adev->data.of_compatible;
-+ if (!drv->of_match_table || !of_compatible)
-+ return false;
-+
-+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
-+ nval = of_compatible->package.count;
-+ obj = of_compatible->package.elements;
-+ } else { /* Must be ACPI_TYPE_STRING. */
-+ nval = 1;
-+ obj = of_compatible;
-+ }
-+ /* Now we can look for the driver DT compatible strings */
-+ for (i = 0; i < nval; i++, obj++) {
-+ const struct of_device_id *id;
-+
-+ for (id = drv->of_match_table; id->compatible[0]; id++)
-+ if (!strcasecmp(obj->string.pointer, id->compatible))
-+ return true;
-+ }
-+
-+ return false;
-+}
-+
-+bool acpi_driver_match_device(struct device *dev,
-+ const struct device_driver *drv)
-+{
-+ if (!drv->acpi_match_table)
-+ return acpi_of_driver_match_device(dev, drv);
-+
-+ return !!acpi_match_device(drv->acpi_match_table, dev);
-+}
-+EXPORT_SYMBOL_GPL(acpi_driver_match_device);
-+
- static void acpi_free_power_resources_lists(struct acpi_device *device)
- {
- int i;
-@@ -922,6 +1006,7 @@ static void acpi_device_release(struct device *dev)
- {
- struct acpi_device *acpi_dev = to_acpi_device(dev);
-
-+ acpi_free_properties(acpi_dev);
- acpi_free_pnp_ids(&acpi_dev->pnp);
- acpi_free_power_resources_lists(acpi_dev);
- kfree(acpi_dev);
-@@ -1304,6 +1389,26 @@ int acpi_device_add(struct acpi_device *device,
- return result;
- }
-
-+struct acpi_device *acpi_get_next_child(struct device *dev,
-+ struct acpi_device *child)
-+{
-+ struct acpi_device *adev = ACPI_COMPANION(dev);
-+ struct list_head *head, *next;
-+
-+ if (!adev)
-+ return NULL;
-+
-+ head = &adev->children;
-+ if (list_empty(head))
-+ return NULL;
-+
-+ if (!child)
-+ return list_first_entry(head, struct acpi_device, node);
-+
-+ next = child->node.next;
-+ return next == head ? NULL : list_entry(next, struct acpi_device, node);
-+}
-+
- /* --------------------------------------------------------------------------
- Driver Management
- -------------------------------------------------------------------------- */
-@@ -1923,9 +2028,11 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
- device->device_type = type;
- device->handle = handle;
- device->parent = acpi_bus_get_parent(handle);
-+ device->fwnode.type = FWNODE_ACPI;
- acpi_set_device_status(device, sta);
- acpi_device_get_busid(device);
- acpi_set_pnp_ids(handle, &device->pnp, type);
-+ acpi_init_properties(device);
- acpi_bus_get_flags(device);
- device->flags.match_driver = false;
- device->flags.initialized = true;
-diff --git a/drivers/acpi/sleep-arm.c b/drivers/acpi/sleep-arm.c
-new file mode 100644
-index 0000000..54578ef
---- /dev/null
-+++ b/drivers/acpi/sleep-arm.c
-@@ -0,0 +1,28 @@
-+/*
-+ * ARM64 Specific Sleep Functionality
-+ *
-+ * Copyright (C) 2013-2014, Linaro Ltd.
-+ * Author: Graeme Gregory <graeme.gregory at linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/acpi.h>
-+
-+/*
-+ * Currently the ACPI 5.1 standard does not define S states in a
-+ * manner which is usable for ARM64. These two stubs are sufficient
-+ * that system initialises and device PM works.
-+ */
-+u32 acpi_target_system_state(void)
-+{
-+ return ACPI_STATE_S0;
-+}
-+EXPORT_SYMBOL_GPL(acpi_target_system_state);
-+
-+int __init acpi_sleep_init(void)
-+{
-+ return -ENOSYS;
-+}
-diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
-index 6d5a6cd..47f36d4 100644
---- a/drivers/acpi/tables.c
-+++ b/drivers/acpi/tables.c
-@@ -183,6 +183,49 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
- }
- break;
-
-+ case ACPI_MADT_TYPE_GENERIC_INTERRUPT:
-+ {
-+ struct acpi_madt_generic_interrupt *p =
-+ (struct acpi_madt_generic_interrupt *)header;
-+ pr_info("GICC (acpi_id[0x%04x] address[%p] MPDIR[0x%llx] %s)\n",
-+ p->uid, (void *)(unsigned long)p->base_address,
-+ p->arm_mpidr,
-+ (p->flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
-+
-+ }
-+ break;
-+
-+ case ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR:
-+ {
-+ struct acpi_madt_generic_distributor *p =
-+ (struct acpi_madt_generic_distributor *)header;
-+ pr_info("GIC Distributor (gic_id[0x%04x] address[%p] gsi_base[%d])\n",
-+ p->gic_id,
-+ (void *)(unsigned long)p->base_address,
-+ p->global_irq_base);
-+ }
-+ break;
-+
-+ case ACPI_MADT_TYPE_GENERIC_MSI_FRAME:
-+ {
-+ struct acpi_madt_generic_msi_frame *p =
-+ (struct acpi_madt_generic_msi_frame *)header;
-+ pr_info("GIC MSI Frame (msi_fame_id[%d] address[%p])\n",
-+ p->msi_frame_id,
-+ (void *)(unsigned long)p->base_address);
-+ }
-+ break;
-+
-+ case ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR:
-+ {
-+ struct acpi_madt_generic_redistributor *p =
-+ (struct acpi_madt_generic_redistributor *)header;
-+ pr_info("GIC Redistributor (address[%p] region_size[0x%x])\n",
-+ (void *)(unsigned long)p->base_address,
-+ p->length);
-+ }
-+ break;
-+
- default:
- pr_warn("Found unsupported MADT entry (type = 0x%x)\n",
- header->type);
-@@ -192,17 +235,14 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
-
-
- int __init
--acpi_table_parse_entries(char *id,
-- unsigned long table_size,
-- int entry_id,
-- acpi_tbl_entry_handler handler,
-- unsigned int max_entries)
-+acpi_parse_entries(unsigned long table_size,
-+ acpi_tbl_entry_handler handler,
-+ struct acpi_table_header *table_header,
-+ int entry_id, unsigned int max_entries)
- {
-- struct acpi_table_header *table_header = NULL;
- struct acpi_subtable_header *entry;
-- unsigned int count = 0;
-+ int count = 0;
- unsigned long table_end;
-- acpi_size tbl_size;
-
- if (acpi_disabled)
- return -ENODEV;
-@@ -210,13 +250,11 @@ acpi_table_parse_entries(char *id,
- if (!handler)
- return -EINVAL;
-
-- if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
-- acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
-- else
-- acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
-+ if (!table_size)
-+ return -EINVAL;
-
- if (!table_header) {
-- pr_warn("%4.4s not present\n", id);
-+ pr_warn("Table header not present\n");
- return -ENODEV;
- }
-
-@@ -230,32 +268,67 @@ acpi_table_parse_entries(char *id,
- while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
- table_end) {
- if (entry->type == entry_id
-- && (!max_entries || count++ < max_entries))
-+ && (!max_entries || count < max_entries)) {
- if (handler(entry, table_end))
-- goto err;
-+ return -EINVAL;
-+
-+ count++;
-+ }
-
- /*
- * If entry->length is 0, break from this loop to avoid
- * infinite loop.
- */
- if (entry->length == 0) {
-- pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, entry_id);
-- goto err;
-+ pr_err("[0x%02x] Invalid zero length\n", entry_id);
-+ return -EINVAL;
- }
-
- entry = (struct acpi_subtable_header *)
- ((unsigned long)entry + entry->length);
- }
-+
if (max_entries && count > max_entries) {
pr_warn("[%4.4s:0x%02x] ignored %i entries of %i found\n",
- id, entry_id, count - max_entries, count);
+ table_header->signature, entry_id, count - max_entries,
+ count);
- }
-
-- early_acpi_os_unmap_memory((char *)table_header, tbl_size);
- return count;
--err:
-+}
-+
-+int __init
-+acpi_table_parse_entries(char *id,
-+ unsigned long table_size,
-+ int entry_id,
-+ acpi_tbl_entry_handler handler,
-+ unsigned int max_entries)
-+{
-+ struct acpi_table_header *table_header = NULL;
-+ acpi_size tbl_size;
-+ int count;
-+
-+ if (acpi_disabled)
-+ return -ENODEV;
-+
-+ if (!handler)
-+ return -EINVAL;
-+
-+ if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
-+ acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
-+ else
-+ acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
-+
-+ if (!table_header) {
-+ pr_warn("%4.4s not present\n", id);
-+ return -ENODEV;
-+ }
-+
-+ count = acpi_parse_entries(table_size, handler, table_header,
-+ entry_id, max_entries);
-+
- early_acpi_os_unmap_memory((char *)table_header, tbl_size);
-- return -EINVAL;
-+ return count;
- }
-
- int __init
-diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
-index 371ac12..af325a7 100644
---- a/drivers/acpi/utils.c
-+++ b/drivers/acpi/utils.c
-@@ -723,3 +723,29 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs)
- return false;
- }
- EXPORT_SYMBOL(acpi_check_dsm);
-+
-+/**
-+ * acpi_check_coherency - check for memory coherency of a device
-+ * @handle: ACPI device handle
-+ * @val: Pointer to returned value
-+ *
-+ * Search a device and its parents for a _CCA method and return
-+ * its value.
-+ */
-+acpi_status acpi_check_coherency(acpi_handle handle, int *val)
-+{
-+ unsigned long long data;
-+ acpi_status status;
-+
-+ do {
-+ status = acpi_evaluate_integer(handle, "_CCA", NULL, &data);
-+ if (!ACPI_FAILURE(status)) {
-+ *val = data;
-+ break;
-+ }
-+ status = acpi_get_parent(handle, &handle);
-+ } while (!ACPI_FAILURE(status));
-+
-+ return status;
-+}
-+EXPORT_SYMBOL(acpi_check_coherency);
-diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
-index cd4cccb..edb00c6 100644
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR
-
- config ATA_ACPI
- bool "ATA ACPI Support"
-- depends on ACPI && PCI
-+ depends on ACPI
- default y
- help
- This option adds support for ATA-related ACPI objects.
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 06f1d59..df2ea85 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -20,6 +20,9 @@
- #include <linux/platform_device.h>
- #include <linux/libata.h>
- #include <linux/ahci_platform.h>
-+#ifdef CONFIG_ATA_ACPI
-+#include <linux/acpi.h>
-+#endif
- #include "ahci.h"
-
- static const struct ata_port_info ahci_port_info = {
-@@ -71,6 +74,13 @@ static const struct of_device_id ahci_of_match[] = {
- };
- MODULE_DEVICE_TABLE(of, ahci_of_match);
-
-+#ifdef CONFIG_ATA_ACPI
-+static const struct acpi_device_id ahci_acpi_match[] = {
-+ { "AMDI0600", 0 }, /* AMD Seattle AHCI */
-+ { },
-+};
-+#endif
-+
- static struct platform_driver ahci_driver = {
- .probe = ahci_probe,
- .remove = ata_platform_remove_one,
-@@ -78,6 +88,9 @@ static struct platform_driver ahci_driver = {
- .name = "ahci",
- .owner = THIS_MODULE,
- .of_match_table = ahci_of_match,
-+#ifdef CONFIG_ATA_ACPI
-+ .acpi_match_table = ACPI_PTR(ahci_acpi_match),
-+#endif
- .pm = &ahci_pm_ops,
- },
- };
-diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
-index 0f8538f..2d8103a 100644
---- a/drivers/ata/ahci_xgene.c
-+++ b/drivers/ata/ahci_xgene.c
-@@ -28,6 +28,7 @@
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/phy/phy.h>
-+#include <linux/acpi.h>
- #include "ahci.h"
-
- /* Max # of disk per a controller */
-@@ -137,7 +138,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
- struct xgene_ahci_context *ctx = hpriv->plat_data;
- int rc = 0;
-
-- if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
-+ if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA ||
-+ ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))
- xgene_ahci_restart_engine(ap);
-
- rc = ahci_qc_issue(qc);
-@@ -148,14 +150,6 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
- return rc;
- }
-
--static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx)
--{
-- void __iomem *diagcsr = ctx->csr_diag;
--
-- return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 &&
-- readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF);
--}
--
- /**
- * xgene_ahci_read_id - Read ID data from the specified device
- * @dev: device
-@@ -501,11 +495,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
- return -ENODEV;
- }
-
-- if (xgene_ahci_is_memram_inited(ctx)) {
-- dev_info(dev, "skip clock and PHY initialization\n");
-- goto skip_clk_phy;
-- }
--
- /* Due to errata, HW requires full toggle transition */
- rc = ahci_platform_enable_clks(hpriv);
- if (rc)
-@@ -518,7 +507,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
-
- /* Configure the host controller */
- xgene_ahci_hw_init(hpriv);
--skip_clk_phy:
-+
- hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
-
- rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
-@@ -533,6 +522,16 @@ disable_resources:
- return rc;
- }
-
-+#ifdef CONFIG_ACPI
-+static const struct acpi_device_id xgene_ahci_acpi_match[] = {
-+ { "APMC0D00", },
-+ { "APMC0D0D", },
-+ { "APMC0D09", },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
-+#endif
-+
- static const struct of_device_id xgene_ahci_of_match[] = {
- {.compatible = "apm,xgene-ahci"},
- {},
-@@ -546,6 +545,7 @@ static struct platform_driver xgene_ahci_driver = {
- .name = "xgene-ahci",
- .owner = THIS_MODULE,
- .of_match_table = xgene_ahci_of_match,
-+ .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match),
- },
- };
-
-diff --git a/drivers/base/Makefile b/drivers/base/Makefile
-index 6922cd6..53c3fe1 100644
---- a/drivers/base/Makefile
-+++ b/drivers/base/Makefile
-@@ -4,7 +4,7 @@ obj-y := component.o core.o bus.o dd.o syscore.o \
- driver.o class.o platform.o \
- cpu.o firmware.o init.o map.o devres.o \
- attribute_container.o transport_class.o \
-- topology.o container.o
-+ topology.o container.o property.o
- obj-$(CONFIG_DEVTMPFS) += devtmpfs.o
- obj-$(CONFIG_DMA_CMA) += dma-contiguous.o
- obj-y += power/
-diff --git a/drivers/base/property.c b/drivers/base/property.c
-new file mode 100644
-index 0000000..c458458
---- /dev/null
-+++ b/drivers/base/property.c
-@@ -0,0 +1,431 @@
-+/*
-+ * property.c - Unified device property interface.
-+ *
-+ * Copyright (C) 2014, Intel Corporation
-+ * Authors: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-+ * Mika Westerberg <mika.westerberg at linux.intel.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/property.h>
-+#include <linux/export.h>
-+#include <linux/acpi.h>
-+#include <linux/of.h>
-+
-+/**
-+ * device_property_present - check if a property of a device is present
-+ * @dev: Device whose property is being checked
-+ * @propname: Name of the property
-+ *
-+ * Check if property @propname is present in the device firmware description.
-+ */
-+bool device_property_present(struct device *dev, const char *propname)
-+{
-+ if (IS_ENABLED(CONFIG_OF) && dev->of_node)
-+ return of_property_read_bool(dev->of_node, propname);
-+
-+ return !acpi_dev_prop_get(ACPI_COMPANION(dev), propname, NULL);
-+}
-+EXPORT_SYMBOL_GPL(device_property_present);
-+
-+/**
-+ * fwnode_property_present - check if a property of a firmware node is present
-+ * @fwnode: Firmware node whose property to check
-+ * @propname: Name of the property
-+ */
-+bool fwnode_property_present(struct fwnode_handle *fwnode, const char *propname)
-+{
-+ if (is_of_node(fwnode))
-+ return of_property_read_bool(of_node(fwnode), propname);
-+ else if (is_acpi_node(fwnode))
-+ return !acpi_dev_prop_get(acpi_node(fwnode), propname, NULL);
-+
-+ return false;
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_present);
-+
-+#define OF_DEV_PROP_READ_ARRAY(node, propname, type, val, nval) \
-+ (val) ? of_property_read_##type##_array((node), (propname), (val), (nval)) \
-+ : of_property_count_elems_of_size((node), (propname), sizeof(type))
-+
-+#define DEV_PROP_READ_ARRAY(_dev_, _propname_, _type_, _proptype_, _val_, _nval_) \
-+ IS_ENABLED(CONFIG_OF) && _dev_->of_node ? \
-+ (OF_DEV_PROP_READ_ARRAY(_dev_->of_node, _propname_, _type_, \
-+ _val_, _nval_)) : \
-+ acpi_dev_prop_read(ACPI_COMPANION(_dev_), _propname_, \
-+ _proptype_, _val_, _nval_)
-+
-+/**
-+ * device_property_read_u8_array - return a u8 array property of a device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Function reads an array of u8 properties with @propname from the device
-+ * firmware description and stores them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected.
-+ */
-+int device_property_read_u8_array(struct device *dev, const char *propname,
-+ u8 *val, size_t nval)
-+{
-+ return DEV_PROP_READ_ARRAY(dev, propname, u8, DEV_PROP_U8, val, nval);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_u8_array);
-+
-+/**
-+ * device_property_read_u16_array - return a u16 array property of a device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Function reads an array of u16 properties with @propname from the device
-+ * firmware description and stores them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected.
-+ */
-+int device_property_read_u16_array(struct device *dev, const char *propname,
-+ u16 *val, size_t nval)
-+{
-+ return DEV_PROP_READ_ARRAY(dev, propname, u16, DEV_PROP_U16, val, nval);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_u16_array);
-+
-+/**
-+ * device_property_read_u32_array - return a u32 array property of a device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Function reads an array of u32 properties with @propname from the device
-+ * firmware description and stores them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected.
-+ */
-+int device_property_read_u32_array(struct device *dev, const char *propname,
-+ u32 *val, size_t nval)
-+{
-+ return DEV_PROP_READ_ARRAY(dev, propname, u32, DEV_PROP_U32, val, nval);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_u32_array);
-+
-+/**
-+ * device_property_read_u64_array - return a u64 array property of a device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Function reads an array of u64 properties with @propname from the device
-+ * firmware description and stores them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected.
-+ */
-+int device_property_read_u64_array(struct device *dev, const char *propname,
-+ u64 *val, size_t nval)
-+{
-+ return DEV_PROP_READ_ARRAY(dev, propname, u64, DEV_PROP_U64, val, nval);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_u64_array);
-+
-+/**
-+ * device_property_read_string_array - return a string array property of device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Function reads an array of string properties with @propname from the device
-+ * firmware description and stores them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO or %-EILSEQ if the property is not an array of strings,
-+ * %-EOVERFLOW if the size of the property is not as expected.
-+ */
-+int device_property_read_string_array(struct device *dev, const char *propname,
-+ const char **val, size_t nval)
-+{
-+ return IS_ENABLED(CONFIG_OF) && dev->of_node ?
-+ of_property_read_string_array(dev->of_node, propname, val, nval) :
-+ acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
-+ DEV_PROP_STRING, val, nval);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_string_array);
-+
-+/**
-+ * device_property_read_string - return a string property of a device
-+ * @dev: Device to get the property of
-+ * @propname: Name of the property
-+ * @val: The value is stored here
-+ *
-+ * Function reads property @propname from the device firmware description and
-+ * stores the value into @val if found. The value is checked to be a string.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO or %-EILSEQ if the property type is not a string.
-+ */
-+int device_property_read_string(struct device *dev, const char *propname,
-+ const char **val)
-+{
-+ return IS_ENABLED(CONFIG_OF) && dev->of_node ?
-+ of_property_read_string(dev->of_node, propname, val) :
-+ acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
-+ DEV_PROP_STRING, val, 1);
-+}
-+EXPORT_SYMBOL_GPL(device_property_read_string);
-+
-+#define FWNODE_PROP_READ_ARRAY(_fwnode_, _propname_, _type_, _proptype_, _val_, _nval_) \
-+({ \
-+ int _ret_; \
-+ if (is_of_node(_fwnode_)) \
-+ _ret_ = OF_DEV_PROP_READ_ARRAY(of_node(_fwnode_), _propname_, \
-+ _type_, _val_, _nval_); \
-+ else if (is_acpi_node(_fwnode_)) \
-+ _ret_ = acpi_dev_prop_read(acpi_node(_fwnode_), _propname_, \
-+ _proptype_, _val_, _nval_); \
-+ else \
-+ _ret_ = -ENXIO; \
-+ _ret_; \
-+})
-+
-+/**
-+ * fwnode_property_read_u8_array - return a u8 array property of firmware node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Read an array of u8 properties with @propname from @fwnode and stores them to
-+ * @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_u8_array(struct fwnode_handle *fwnode,
-+ const char *propname, u8 *val, size_t nval)
-+{
-+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u8, DEV_PROP_U8,
-+ val, nval);
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_u8_array);
-+
-+/**
-+ * fwnode_property_read_u16_array - return a u16 array property of firmware node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Read an array of u16 properties with @propname from @fwnode and store them to
-+ * @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_u16_array(struct fwnode_handle *fwnode,
-+ const char *propname, u16 *val, size_t nval)
-+{
-+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u16, DEV_PROP_U16,
-+ val, nval);
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_u16_array);
-+
-+/**
-+ * fwnode_property_read_u32_array - return a u32 array property of firmware node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Read an array of u32 properties with @propname from @fwnode store them to
-+ * @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_u32_array(struct fwnode_handle *fwnode,
-+ const char *propname, u32 *val, size_t nval)
-+{
-+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u32, DEV_PROP_U32,
-+ val, nval);
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_u32_array);
-+
-+/**
-+ * fwnode_property_read_u64_array - return a u64 array property firmware node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Read an array of u64 properties with @propname from @fwnode and store them to
-+ * @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of numbers,
-+ * %-EOVERFLOW if the size of the property is not as expected,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_u64_array(struct fwnode_handle *fwnode,
-+ const char *propname, u64 *val, size_t nval)
-+{
-+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u64, DEV_PROP_U64,
-+ val, nval);
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_u64_array);
-+
-+/**
-+ * fwnode_property_read_string_array - return string array property of a node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The values are stored here
-+ * @nval: Size of the @val array
-+ *
-+ * Read an string list property @propname from the given firmware node and store
-+ * them to @val if found.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO if the property is not an array of strings,
-+ * %-EOVERFLOW if the size of the property is not as expected,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_string_array(struct fwnode_handle *fwnode,
-+ const char *propname, const char **val,
-+ size_t nval)
-+{
-+ if (is_of_node(fwnode))
-+ return of_property_read_string_array(of_node(fwnode), propname,
-+ val, nval);
-+ else if (is_acpi_node(fwnode))
-+ return acpi_dev_prop_read(acpi_node(fwnode), propname,
-+ DEV_PROP_STRING, val, nval);
-+
-+ return -ENXIO;
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_string_array);
-+
-+/**
-+ * fwnode_property_read_string - return a string property of a firmware node
-+ * @fwnode: Firmware node to get the property of
-+ * @propname: Name of the property
-+ * @val: The value is stored here
-+ *
-+ * Read property @propname from the given firmware node and store the value into
-+ * @val if found. The value is checked to be a string.
-+ *
-+ * Return: %0 if the property was found (success),
-+ * %-EINVAL if given arguments are not valid,
-+ * %-ENODATA if the property does not have a value,
-+ * %-EPROTO or %-EILSEQ if the property is not a string,
-+ * %-ENXIO if no suitable firmware interface is present.
-+ */
-+int fwnode_property_read_string(struct fwnode_handle *fwnode,
-+ const char *propname, const char **val)
-+{
-+ if (is_of_node(fwnode))
-+ return of_property_read_string(of_node(fwnode),propname, val);
-+ else if (is_acpi_node(fwnode))
-+ return acpi_dev_prop_read(acpi_node(fwnode), propname,
-+ DEV_PROP_STRING, val, 1);
-+
-+ return -ENXIO;
-+}
-+EXPORT_SYMBOL_GPL(fwnode_property_read_string);
-+
-+/**
-+ * device_get_next_child_node - Return the next child node handle for a device
-+ * @dev: Device to find the next child node for.
-+ * @child: Handle to one of the device's child nodes or a null handle.
-+ */
-+struct fwnode_handle *device_get_next_child_node(struct device *dev,
-+ struct fwnode_handle *child)
-+{
-+ if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
-+ struct device_node *node;
-+
-+ node = of_get_next_available_child(dev->of_node, of_node(child));
-+ if (node)
-+ return &node->fwnode;
-+ } else if (IS_ENABLED(CONFIG_ACPI)) {
-+ struct acpi_device *node;
-+
-+ node = acpi_get_next_child(dev, acpi_node(child));
-+ if (node)
-+ return acpi_fwnode_handle(node);
-+ }
-+ return NULL;
-+}
-+EXPORT_SYMBOL_GPL(device_get_next_child_node);
-+
-+/**
-+ * fwnode_handle_put - Drop reference to a device node
-+ * @fwnode: Pointer to the device node to drop the reference to.
-+ *
-+ * This has to be used when terminating device_for_each_child_node() iteration
-+ * with break or return to prevent stale device node references from being left
-+ * behind.
-+ */
-+void fwnode_handle_put(struct fwnode_handle *fwnode)
-+{
-+ if (is_of_node(fwnode))
-+ of_node_put(of_node(fwnode));
-+}
-+EXPORT_SYMBOL_GPL(fwnode_handle_put);
-+
-+/**
-+ * device_get_child_node_count - return the number of child nodes for device
-+ * @dev: Device to cound the child nodes for
-+ */
-+unsigned int device_get_child_node_count(struct device *dev)
-+{
-+ struct fwnode_handle *child;
-+ unsigned int count = 0;
-+
-+ device_for_each_child_node(dev, child)
-+ count++;
-+
-+ return count;
-+}
-+EXPORT_SYMBOL_GPL(device_get_child_node_count);
-diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
-index 43005d4..c9411e6 100644
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -21,6 +21,7 @@
- #include <linux/io.h>
- #include <linux/slab.h>
- #include <linux/sched_clock.h>
-+#include <linux/acpi.h>
-
- #include <asm/arch_timer.h>
- #include <asm/virt.h>
-@@ -61,7 +62,8 @@ enum ppi_nr {
- MAX_TIMER_PPI
- };
-
--static int arch_timer_ppi[MAX_TIMER_PPI];
-+int arch_timer_ppi[MAX_TIMER_PPI];
-+EXPORT_SYMBOL(arch_timer_ppi);
-
- static struct clock_event_device __percpu *arch_timer_evt;
-
-@@ -370,8 +372,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
- if (arch_timer_rate)
- return;
-
-- /* Try to determine the frequency from the device tree or CNTFRQ */
-- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
-+ /*
-+ * Try to determine the frequency from the device tree or CNTFRQ,
-+ * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
-+ */
-+ if (!acpi_disabled ||
-+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
- if (cntbase)
- arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
- else
-@@ -687,20 +693,8 @@ static void __init arch_timer_common_init(void)
- arch_timer_arch_init();
- }
-
--static void __init arch_timer_init(struct device_node *np)
-+static void __init arch_timer_init(void)
- {
-- int i;
--
-- if (arch_timers_present & ARCH_CP15_TIMER) {
-- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
-- return;
-- }
--
-- arch_timers_present |= ARCH_CP15_TIMER;
-- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
-- arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
-- arch_timer_detect_rate(NULL, np);
--
- /*
- * If HYP mode is available, we know that the physical timer
- * has been configured to be accessible from PL1. Use it, so
-@@ -719,13 +713,31 @@ static void __init arch_timer_init(struct device_node *np)
- }
- }
-
-- arch_timer_c3stop = !of_property_read_bool(np, "always-on");
--
- arch_timer_register();
- arch_timer_common_init();
- }
--CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
--CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
-+
-+static void __init arch_timer_of_init(struct device_node *np)
-+{
-+ int i;
-+
-+ if (arch_timers_present & ARCH_CP15_TIMER) {
-+ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
-+ return;
-+ }
-+
-+ arch_timers_present |= ARCH_CP15_TIMER;
-+ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
-+ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
-+
-+ arch_timer_detect_rate(NULL, np);
-+
-+ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
-+
-+ arch_timer_init();
-+}
-+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
-+CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
-
- static void __init arch_timer_mem_init(struct device_node *np)
- {
-@@ -792,3 +804,71 @@ static void __init arch_timer_mem_init(struct device_node *np)
- }
- CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
- arch_timer_mem_init);
-+
-+#ifdef CONFIG_ACPI
-+static int __init
-+map_generic_timer_interrupt(u32 interrupt, u32 flags)
-+{
-+ int trigger, polarity;
-+
-+ if (!interrupt)
-+ return 0;
-+
-+ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
-+ : ACPI_LEVEL_SENSITIVE;
-+
-+ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
-+ : ACPI_ACTIVE_HIGH;
-+
-+ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
-+}
-+
-+/* Initialize per-processor generic timer */
-+static int __init arch_timer_acpi_init(struct acpi_table_header *table)
-+{
-+ struct acpi_table_gtdt *gtdt;
-+
-+ if (arch_timers_present & ARCH_CP15_TIMER) {
-+ pr_warn("arch_timer: already initialized, skipping\n");
-+ return -EINVAL;
-+ }
-+
-+ gtdt = container_of(table, struct acpi_table_gtdt, header);
-+
-+ arch_timers_present |= ARCH_CP15_TIMER;
-+
-+ arch_timer_ppi[PHYS_SECURE_PPI] =
-+ map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
-+ gtdt->secure_el1_flags);
-+
-+ arch_timer_ppi[PHYS_NONSECURE_PPI] =
-+ map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
-+ gtdt->non_secure_el1_flags);
-+
-+ arch_timer_ppi[VIRT_PPI] =
-+ map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
-+ gtdt->virtual_timer_flags);
-+
-+ arch_timer_ppi[HYP_PPI] =
-+ map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
-+ gtdt->non_secure_el2_flags);
-+
-+ /* Get the frequency from CNTFRQ */
-+ arch_timer_detect_rate(NULL, NULL);
-+
-+ /* Always-on capability */
-+ arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
-+
-+ arch_timer_init();
-+ return 0;
-+}
-+
-+/* Initialize all the generic timers presented in GTDT */
-+void __init acpi_generic_timer_init(void)
-+{
-+ if (acpi_disabled)
-+ return;
-+
-+ acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
-+}
-+#endif
-diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
-index 17afc51..c5f7b4e 100644
---- a/drivers/firmware/dmi_scan.c
-+++ b/drivers/firmware/dmi_scan.c
-@@ -93,6 +93,12 @@ static void dmi_table(u8 *buf, int len, int num,
- const struct dmi_header *dm = (const struct dmi_header *)data;
-
- /*
-+ * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0]
-+ */
-+ if (dm->type == DMI_ENTRY_END_OF_TABLE)
-+ break;
-+
-+ /*
- * We want to know the total length (formatted area and
- * strings) before decoding to make sure we won't run off the
- * table in dmi_decode or dmi_string
-@@ -107,7 +113,7 @@ static void dmi_table(u8 *buf, int len, int num,
- }
- }
-
--static u32 dmi_base;
-+static phys_addr_t dmi_base;
- static u16 dmi_len;
- static u16 dmi_num;
-
-@@ -467,7 +473,7 @@ static int __init dmi_present(const u8 *buf)
-
- if (memcmp(buf, "_SM_", 4) == 0 &&
- buf[5] < 32 && dmi_checksum(buf, buf[5])) {
-- smbios_ver = (buf[6] << 8) + buf[7];
-+ smbios_ver = get_unaligned_be16(buf + 6);
-
- /* Some BIOS report weird SMBIOS version, fix that up */
- switch (smbios_ver) {
-@@ -489,10 +495,9 @@ static int __init dmi_present(const u8 *buf)
- buf += 16;
-
- if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) {
-- dmi_num = (buf[13] << 8) | buf[12];
-- dmi_len = (buf[7] << 8) | buf[6];
-- dmi_base = (buf[11] << 24) | (buf[10] << 16) |
-- (buf[9] << 8) | buf[8];
-+ dmi_num = get_unaligned_le16(buf + 12);
-+ dmi_len = get_unaligned_le16(buf + 6);
-+ dmi_base = get_unaligned_le32(buf + 8);
-
- if (dmi_walk_early(dmi_decode) == 0) {
- if (smbios_ver) {
-@@ -514,12 +519,72 @@ static int __init dmi_present(const u8 *buf)
- return 1;
- }
-
-+/*
-+ * Check for the SMBIOS 3.0 64-bit entry point signature. Unlike the legacy
-+ * 32-bit entry point, there is no embedded DMI header (_DMI_) in here.
-+ */
-+static int __init dmi_smbios3_present(const u8 *buf)
-+{
-+ if (memcmp(buf, "_SM3_", 5) == 0 &&
-+ buf[6] < 32 && dmi_checksum(buf, buf[6])) {
-+ dmi_ver = get_unaligned_be16(buf + 7);
-+ dmi_len = get_unaligned_le32(buf + 12);
-+ dmi_base = get_unaligned_le64(buf + 16);
-+
-+ /*
-+ * The 64-bit SMBIOS 3.0 entry point no longer has a field
-+ * containing the number of structures present in the table.
-+ * Instead, it defines the table size as a maximum size, and
-+ * relies on the end-of-table structure type (#127) to be used
-+ * to signal the end of the table.
-+ * So let's define dmi_num as an upper bound as well: each
-+ * structure has a 4 byte header, so dmi_len / 4 is an upper
-+ * bound for the number of structures in the table.
-+ */
-+ dmi_num = dmi_len / 4;
-+
-+ if (dmi_walk_early(dmi_decode) == 0) {
-+ pr_info("SMBIOS %d.%d present.\n",
-+ dmi_ver >> 8, dmi_ver & 0xFF);
-+ dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string));
-+ pr_debug("DMI: %s\n", dmi_ids_string);
-+ return 0;
-+ }
-+ }
-+ return 1;
-+}
-+
- void __init dmi_scan_machine(void)
- {
- char __iomem *p, *q;
- char buf[32];
-
- if (efi_enabled(EFI_CONFIG_TABLES)) {
-+ /*
-+ * According to the DMTF SMBIOS reference spec v3.0.0, it is
-+ * allowed to define both the 64-bit entry point (smbios3) and
-+ * the 32-bit entry point (smbios), in which case they should
-+ * either both point to the same SMBIOS structure table, or the
-+ * table pointed to by the 64-bit entry point should contain a
-+ * superset of the table contents pointed to by the 32-bit entry
-+ * point (section 5.2)
-+ * This implies that the 64-bit entry point should have
-+ * precedence if it is defined and supported by the OS. If we
-+ * have the 64-bit entry point, but fail to decode it, fall
-+ * back to the legacy one (if available)
-+ */
-+ if (efi.smbios3 != EFI_INVALID_TABLE_ADDR) {
-+ p = dmi_early_remap(efi.smbios3, 32);
-+ if (p == NULL)
-+ goto error;
-+ memcpy_fromio(buf, p, 32);
-+ dmi_early_unmap(p, 32);
-+
-+ if (!dmi_smbios3_present(buf)) {
-+ dmi_available = 1;
-+ goto out;
-+ }
-+ }
- if (efi.smbios == EFI_INVALID_TABLE_ADDR)
- goto error;
-
-@@ -552,7 +617,7 @@ void __init dmi_scan_machine(void)
- memset(buf, 0, 16);
- for (q = p; q < p + 0x10000; q += 16) {
- memcpy_fromio(buf + 16, q, 16);
-- if (!dmi_present(buf)) {
-+ if (!dmi_smbios3_present(buf) || !dmi_present(buf)) {
- dmi_available = 1;
- dmi_early_unmap(p, 0x10000);
- goto out;
-diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
-index 8590099..9035c1b 100644
---- a/drivers/firmware/efi/efi.c
-+++ b/drivers/firmware/efi/efi.c
-@@ -30,6 +30,7 @@ struct efi __read_mostly efi = {
- .acpi = EFI_INVALID_TABLE_ADDR,
- .acpi20 = EFI_INVALID_TABLE_ADDR,
- .smbios = EFI_INVALID_TABLE_ADDR,
-+ .smbios3 = EFI_INVALID_TABLE_ADDR,
- .sal_systab = EFI_INVALID_TABLE_ADDR,
- .boot_info = EFI_INVALID_TABLE_ADDR,
- .hcdp = EFI_INVALID_TABLE_ADDR,
-@@ -86,6 +87,8 @@ static ssize_t systab_show(struct kobject *kobj,
- str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
- if (efi.smbios != EFI_INVALID_TABLE_ADDR)
- str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
-+ if (efi.smbios3 != EFI_INVALID_TABLE_ADDR)
-+ str += sprintf(str, "SMBIOS3=0x%lx\n", efi.smbios3);
- if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
- str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
- if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
-@@ -260,6 +263,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
- {MPS_TABLE_GUID, "MPS", &efi.mps},
- {SAL_SYSTEM_TABLE_GUID, "SALsystab", &efi.sal_systab},
- {SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
-+ {SMBIOS3_TABLE_GUID, "SMBIOS 3.0", &efi.smbios3},
- {UGA_IO_PROTOCOL_GUID, "UGA", &efi.uga},
- {NULL_GUID, NULL, NULL},
- };
-diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
-index 75ee059..eb48a1a 100644
---- a/drivers/firmware/efi/libstub/arm-stub.c
-+++ b/drivers/firmware/efi/libstub/arm-stub.c
-@@ -247,9 +247,18 @@ unsigned long __init efi_entry(void *handle, efi_system_table_t *sys_table,
- goto fail_free_cmdline;
- }
- }
-- if (!fdt_addr)
-+
-+ if (fdt_addr) {
-+ pr_efi(sys_table, "Using DTB from command line\n");
-+ } else {
- /* Look for a device tree configuration table entry. */
- fdt_addr = (uintptr_t)get_fdt(sys_table);
-+ if (fdt_addr)
-+ pr_efi(sys_table, "Using DTB from configuration table\n");
-+ }
-+
-+ if (!fdt_addr)
-+ pr_efi(sys_table, "Generating empty DTB\n");
-
- status = handle_cmdline_files(sys_table, image, cmdline_ptr,
- "initrd=", dram_base + SZ_512M,
-diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
-index 954b9f6..13dbd3d 100644
---- a/drivers/gpio/devres.c
-+++ b/drivers/gpio/devres.c
-@@ -109,6 +109,38 @@ struct gpio_desc *__must_check __devm_gpiod_get_index(struct device *dev,
- EXPORT_SYMBOL(__devm_gpiod_get_index);
+ }
- /**
-+ * devm_get_gpiod_from_child - get a GPIO descriptor from a device's child node
-+ * @dev: GPIO consumer
-+ * @child: firmware node (child of @dev)
+ return count;
+diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
+index cd49a39..7f68f96 100644
+--- a/drivers/acpi/utils.c
++++ b/drivers/acpi/utils.c
+@@ -712,3 +712,29 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs)
+ return false;
+ }
+ EXPORT_SYMBOL(acpi_check_dsm);
++
++/**
++ * acpi_check_coherency - check for memory coherency of a device
++ * @handle: ACPI device handle
++ * @val: Pointer to returned value
+ *
-+ * GPIO descriptors returned from this function are automatically disposed on
-+ * driver detach.
++ * Search a device and its parents for a _CCA method and return
++ * its value.
+ */
-+struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
-+ struct fwnode_handle *child)
++acpi_status acpi_check_coherency(acpi_handle handle, int *val)
+{
-+ struct gpio_desc **dr;
-+ struct gpio_desc *desc;
-+
-+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
-+ GFP_KERNEL);
-+ if (!dr)
-+ return ERR_PTR(-ENOMEM);
-+
-+ desc = fwnode_get_named_gpiod(child, "gpios");
-+ if (IS_ERR(desc)) {
-+ devres_free(dr);
-+ return desc;
-+ }
++ unsigned long long data;
++ acpi_status status;
+
-+ *dr = desc;
-+ devres_add(dev, dr);
++ do {
++ status = acpi_evaluate_integer(handle, "_CCA", NULL, &data);
++ if (!ACPI_FAILURE(status)) {
++ *val = data;
++ break;
++ }
++ status = acpi_get_parent(handle, &handle);
++ } while (!ACPI_FAILURE(status));
+
-+ return desc;
++ return status;
+}
-+EXPORT_SYMBOL(devm_get_gpiod_from_child);
-+
-+/**
- * devm_gpiod_get_index_optional - Resource-managed gpiod_get_index_optional()
- * @dev: GPIO consumer
- * @con_id: function within the GPIO consumer
-diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
-index 41e91d7..99720c8 100644
---- a/drivers/gpio/gpio-sch.c
-+++ b/drivers/gpio/gpio-sch.c
-@@ -29,290 +29,221 @@
-
- #include <linux/gpio.h>
-
--static DEFINE_SPINLOCK(gpio_lock);
--
--#define CGEN (0x00)
--#define CGIO (0x04)
--#define CGLV (0x08)
--
--#define RGEN (0x20)
--#define RGIO (0x24)
--#define RGLV (0x28)
--
--static unsigned short gpio_ba;
--
--static int sch_gpio_core_direction_in(struct gpio_chip *gc, unsigned gpio_num)
--{
-- u8 curr_dirs;
-- unsigned short offset, bit;
--
-- spin_lock(&gpio_lock);
--
-- offset = CGIO + gpio_num / 8;
-- bit = gpio_num % 8;
--
-- curr_dirs = inb(gpio_ba + offset);
--
-- if (!(curr_dirs & (1 << bit)))
-- outb(curr_dirs | (1 << bit), gpio_ba + offset);
-+#define GEN 0x00
-+#define GIO 0x04
-+#define GLV 0x08
-+
-+struct sch_gpio {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ unsigned short iobase;
-+ unsigned short core_base;
-+ unsigned short resume_base;
-+};
++EXPORT_SYMBOL(acpi_check_coherency);
+diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
+index a3a1360..edca892 100644
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR
-- spin_unlock(&gpio_lock);
-- return 0;
--}
-+#define to_sch_gpio(c) container_of(c, struct sch_gpio, chip)
+ config ATA_ACPI
+ bool "ATA ACPI Support"
+- depends on ACPI && PCI
++ depends on ACPI
+ default y
+ help
+ This option adds support for ATA-related ACPI objects.
+diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
+index 18d5398..999e577 100644
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -20,6 +20,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/libata.h>
+ #include <linux/ahci_platform.h>
++#ifdef CONFIG_ATA_ACPI
++#include <linux/acpi.h>
++#endif
+ #include "ahci.h"
--static int sch_gpio_core_get(struct gpio_chip *gc, unsigned gpio_num)
-+static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
-+ unsigned reg)
- {
-- int res;
-- unsigned short offset, bit;
-+ unsigned base = 0;
-
-- offset = CGLV + gpio_num / 8;
-- bit = gpio_num % 8;
-+ if (gpio >= sch->resume_base) {
-+ gpio -= sch->resume_base;
-+ base += 0x20;
-+ }
+ static const struct ata_port_info ahci_port_info = {
+@@ -71,12 +74,22 @@ static const struct of_device_id ahci_of_match[] = {
+ };
+ MODULE_DEVICE_TABLE(of, ahci_of_match);
-- res = !!(inb(gpio_ba + offset) & (1 << bit));
-- return res;
-+ return base + reg + gpio / 8;
- }
++#ifdef CONFIG_ATA_ACPI
++static const struct acpi_device_id ahci_acpi_match[] = {
++ { "AMDI0600", 0 }, /* AMD Seattle AHCI */
++ { },
++};
++#endif
++
+ static struct platform_driver ahci_driver = {
+ .probe = ahci_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci",
+ .of_match_table = ahci_of_match,
++#ifdef CONFIG_ATA_ACPI
++ .acpi_match_table = ACPI_PTR(ahci_acpi_match),
++#endif
+ .pm = &ahci_pm_ops,
+ },
+ };
+diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
+index feeb8f1..8f82267 100644
+--- a/drivers/ata/ahci_xgene.c
++++ b/drivers/ata/ahci_xgene.c
+@@ -28,6 +28,7 @@
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/phy/phy.h>
++#include <linux/acpi.h>
+ #include "ahci.h"
--static void sch_gpio_core_set(struct gpio_chip *gc, unsigned gpio_num, int val)
-+static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
- {
-- u8 curr_vals;
-- unsigned short offset, bit;
--
-- spin_lock(&gpio_lock);
--
-- offset = CGLV + gpio_num / 8;
-- bit = gpio_num % 8;
--
-- curr_vals = inb(gpio_ba + offset);
--
-- if (val)
-- outb(curr_vals | (1 << bit), gpio_ba + offset);
-- else
-- outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
-- spin_unlock(&gpio_lock);
-+ if (gpio >= sch->resume_base)
-+ gpio -= sch->resume_base;
-+ return gpio % 8;
+ /* Max # of disk per a controller */
+@@ -148,14 +150,6 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+ return rc;
}
--static int sch_gpio_core_direction_out(struct gpio_chip *gc,
-- unsigned gpio_num, int val)
-+static void sch_gpio_enable(struct sch_gpio *sch, unsigned gpio)
- {
-- u8 curr_dirs;
- unsigned short offset, bit;
-+ u8 enable;
-
-- spin_lock(&gpio_lock);
-+ spin_lock(&sch->lock);
-
-- offset = CGIO + gpio_num / 8;
-- bit = gpio_num % 8;
+-static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx)
+-{
+- void __iomem *diagcsr = ctx->csr_diag;
-
-- curr_dirs = inb(gpio_ba + offset);
-- if (curr_dirs & (1 << bit))
-- outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
-+ offset = sch_gpio_offset(sch, gpio, GEN);
-+ bit = sch_gpio_bit(sch, gpio);
-
-- spin_unlock(&gpio_lock);
-+ enable = inb(sch->iobase + offset);
-+ if (!(enable & (1 << bit)))
-+ outb(enable | (1 << bit), sch->iobase + offset);
-
-- /*
-- * according to the datasheet, writing to the level register has no
-- * effect when GPIO is programmed as input.
-- * Actually the the level register is read-only when configured as input.
-- * Thus presetting the output level before switching to output is _NOT_ possible.
-- * Hence we set the level after configuring the GPIO as output.
-- * But we cannot prevent a short low pulse if direction is set to high
-- * and an external pull-up is connected.
-- */
-- sch_gpio_core_set(gc, gpio_num, val);
-- return 0;
-+ spin_unlock(&sch->lock);
- }
-
--static struct gpio_chip sch_gpio_core = {
-- .label = "sch_gpio_core",
-- .owner = THIS_MODULE,
-- .direction_input = sch_gpio_core_direction_in,
-- .get = sch_gpio_core_get,
-- .direction_output = sch_gpio_core_direction_out,
-- .set = sch_gpio_core_set,
--};
+- return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 &&
+- readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF);
+-}
-
--static int sch_gpio_resume_direction_in(struct gpio_chip *gc,
-- unsigned gpio_num)
-+static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
- {
-+ struct sch_gpio *sch = to_sch_gpio(gc);
- u8 curr_dirs;
- unsigned short offset, bit;
-
-- spin_lock(&gpio_lock);
-+ spin_lock(&sch->lock);
-
-- offset = RGIO + gpio_num / 8;
-- bit = gpio_num % 8;
-+ offset = sch_gpio_offset(sch, gpio_num, GIO);
-+ bit = sch_gpio_bit(sch, gpio_num);
-
-- curr_dirs = inb(gpio_ba + offset);
-+ curr_dirs = inb(sch->iobase + offset);
-
- if (!(curr_dirs & (1 << bit)))
-- outb(curr_dirs | (1 << bit), gpio_ba + offset);
-+ outb(curr_dirs | (1 << bit), sch->iobase + offset);
-
-- spin_unlock(&gpio_lock);
-+ spin_unlock(&sch->lock);
- return 0;
- }
+ /**
+ * xgene_ahci_read_id - Read ID data from the specified device
+ * @dev: device
+@@ -501,11 +495,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
+ return -ENODEV;
+ }
--static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num)
-+static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
- {
-+ struct sch_gpio *sch = to_sch_gpio(gc);
-+ int res;
- unsigned short offset, bit;
+- if (xgene_ahci_is_memram_inited(ctx)) {
+- dev_info(dev, "skip clock and PHY initialization\n");
+- goto skip_clk_phy;
+- }
+-
+ /* Due to errata, HW requires full toggle transition */
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+@@ -518,7 +507,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
-- offset = RGLV + gpio_num / 8;
-- bit = gpio_num % 8;
-+ offset = sch_gpio_offset(sch, gpio_num, GLV);
-+ bit = sch_gpio_bit(sch, gpio_num);
+ /* Configure the host controller */
+ xgene_ahci_hw_init(hpriv);
+-skip_clk_phy:
+
-+ res = !!(inb(sch->iobase + offset) & (1 << bit));
+ hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
-- return !!(inb(gpio_ba + offset) & (1 << bit));
-+ return res;
+ rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
+@@ -533,6 +522,16 @@ disable_resources:
+ return rc;
}
--static void sch_gpio_resume_set(struct gpio_chip *gc,
-- unsigned gpio_num, int val)
-+static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
- {
-+ struct sch_gpio *sch = to_sch_gpio(gc);
- u8 curr_vals;
- unsigned short offset, bit;
-
-- spin_lock(&gpio_lock);
-+ spin_lock(&sch->lock);
-
-- offset = RGLV + gpio_num / 8;
-- bit = gpio_num % 8;
-+ offset = sch_gpio_offset(sch, gpio_num, GLV);
-+ bit = sch_gpio_bit(sch, gpio_num);
-
-- curr_vals = inb(gpio_ba + offset);
-+ curr_vals = inb(sch->iobase + offset);
-
- if (val)
-- outb(curr_vals | (1 << bit), gpio_ba + offset);
-+ outb(curr_vals | (1 << bit), sch->iobase + offset);
- else
-- outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
-+ outb((curr_vals & ~(1 << bit)), sch->iobase + offset);
-
-- spin_unlock(&gpio_lock);
-+ spin_unlock(&sch->lock);
- }
++#ifdef CONFIG_ACPI
++static const struct acpi_device_id xgene_ahci_acpi_match[] = {
++ { "APMC0D00", },
++ { "APMC0D0D", },
++ { "APMC0D09", },
++ { }
++};
++MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
++#endif
++
+ static const struct of_device_id xgene_ahci_of_match[] = {
+ {.compatible = "apm,xgene-ahci"},
+ {},
+@@ -545,6 +544,7 @@ static struct platform_driver xgene_ahci_driver = {
+ .driver = {
+ .name = "xgene-ahci",
+ .of_match_table = xgene_ahci_of_match,
++ .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match),
+ },
+ };
--static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
-- unsigned gpio_num, int val)
-+static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
-+ int val)
- {
-+ struct sch_gpio *sch = to_sch_gpio(gc);
- u8 curr_dirs;
- unsigned short offset, bit;
+diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
+index 095c177..fd5ebbf 100644
+--- a/drivers/clocksource/arm_arch_timer.c
++++ b/drivers/clocksource/arm_arch_timer.c
+@@ -21,6 +21,7 @@
+ #include <linux/io.h>
+ #include <linux/slab.h>
+ #include <linux/sched_clock.h>
++#include <linux/acpi.h>
-- offset = RGIO + gpio_num / 8;
-- bit = gpio_num % 8;
-+ spin_lock(&sch->lock);
+ #include <asm/arch_timer.h>
+ #include <asm/virt.h>
+@@ -61,7 +62,8 @@ enum ppi_nr {
+ MAX_TIMER_PPI
+ };
-- spin_lock(&gpio_lock);
-+ offset = sch_gpio_offset(sch, gpio_num, GIO);
-+ bit = sch_gpio_bit(sch, gpio_num);
+-static int arch_timer_ppi[MAX_TIMER_PPI];
++int arch_timer_ppi[MAX_TIMER_PPI];
++EXPORT_SYMBOL(arch_timer_ppi);
-- curr_dirs = inb(gpio_ba + offset);
-+ curr_dirs = inb(sch->iobase + offset);
- if (curr_dirs & (1 << bit))
-- outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
-+ outb(curr_dirs & ~(1 << bit), sch->iobase + offset);
+ static struct clock_event_device __percpu *arch_timer_evt;
-- spin_unlock(&gpio_lock);
-+ spin_unlock(&sch->lock);
+@@ -370,8 +372,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
+ if (arch_timer_rate)
+ return;
- /*
-- * according to the datasheet, writing to the level register has no
-- * effect when GPIO is programmed as input.
-- * Actually the the level register is read-only when configured as input.
-- * Thus presetting the output level before switching to output is _NOT_ possible.
-- * Hence we set the level after configuring the GPIO as output.
-- * But we cannot prevent a short low pulse if direction is set to high
-- * and an external pull-up is connected.
-- */
-- sch_gpio_resume_set(gc, gpio_num, val);
-+ * according to the datasheet, writing to the level register has no
-+ * effect when GPIO is programmed as input.
-+ * Actually the the level register is read-only when configured as input.
-+ * Thus presetting the output level before switching to output is _NOT_ possible.
-+ * Hence we set the level after configuring the GPIO as output.
-+ * But we cannot prevent a short low pulse if direction is set to high
-+ * and an external pull-up is connected.
+- /* Try to determine the frequency from the device tree or CNTFRQ */
+- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
++ /*
++ * Try to determine the frequency from the device tree or CNTFRQ,
++ * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
+ */
-+ sch_gpio_set(gc, gpio_num, val);
- return 0;
++ if (!acpi_disabled ||
++ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
+ if (cntbase)
+ arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
+ else
+@@ -690,28 +696,8 @@ static void __init arch_timer_common_init(void)
+ arch_timer_arch_init();
}
--static struct gpio_chip sch_gpio_resume = {
-- .label = "sch_gpio_resume",
-+static struct gpio_chip sch_gpio_chip = {
-+ .label = "sch_gpio",
- .owner = THIS_MODULE,
-- .direction_input = sch_gpio_resume_direction_in,
-- .get = sch_gpio_resume_get,
-- .direction_output = sch_gpio_resume_direction_out,
-- .set = sch_gpio_resume_set,
-+ .direction_input = sch_gpio_direction_in,
-+ .get = sch_gpio_get,
-+ .direction_output = sch_gpio_direction_out,
-+ .set = sch_gpio_set,
- };
-
- static int sch_gpio_probe(struct platform_device *pdev)
+-static void __init arch_timer_init(struct device_node *np)
++static void __init arch_timer_init(void)
{
-+ struct sch_gpio *sch;
- struct resource *res;
-- int err, id;
-
-- id = pdev->id;
-- if (!id)
-- return -ENODEV;
-+ sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
-+ if (!sch)
-+ return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res)
- return -EBUSY;
-
-- if (!request_region(res->start, resource_size(res), pdev->name))
-+ if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
-+ pdev->name))
- return -EBUSY;
-
-- gpio_ba = res->start;
-+ spin_lock_init(&sch->lock);
-+ sch->iobase = res->start;
-+ sch->chip = sch_gpio_chip;
-+ sch->chip.label = dev_name(&pdev->dev);
-+ sch->chip.dev = &pdev->dev;
-
-- switch (id) {
-+ switch (pdev->id) {
- case PCI_DEVICE_ID_INTEL_SCH_LPC:
-- sch_gpio_core.base = 0;
-- sch_gpio_core.ngpio = 10;
-- sch_gpio_resume.base = 10;
-- sch_gpio_resume.ngpio = 4;
-+ sch->core_base = 0;
-+ sch->resume_base = 10;
-+ sch->chip.ngpio = 14;
-+
- /*
- * GPIO[6:0] enabled by default
- * GPIO7 is configured by the CMC as SLPIOVR
- * Enable GPIO[9:8] core powered gpios explicitly
- */
-- outb(0x3, gpio_ba + CGEN + 1);
-+ sch_gpio_enable(sch, 8);
-+ sch_gpio_enable(sch, 9);
- /*
- * SUS_GPIO[2:0] enabled by default
- * Enable SUS_GPIO3 resume powered gpio explicitly
- */
-- outb(0x8, gpio_ba + RGEN);
-+ sch_gpio_enable(sch, 13);
- break;
-
- case PCI_DEVICE_ID_INTEL_ITC_LPC:
-- sch_gpio_core.base = 0;
-- sch_gpio_core.ngpio = 5;
-- sch_gpio_resume.base = 5;
-- sch_gpio_resume.ngpio = 9;
-+ sch->core_base = 0;
-+ sch->resume_base = 5;
-+ sch->chip.ngpio = 14;
- break;
-
- case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
-- sch_gpio_core.base = 0;
-- sch_gpio_core.ngpio = 21;
-- sch_gpio_resume.base = 21;
-- sch_gpio_resume.ngpio = 9;
-+ sch->core_base = 0;
-+ sch->resume_base = 21;
-+ sch->chip.ngpio = 30;
- break;
-
- default:
-- err = -ENODEV;
-- goto err_sch_gpio_core;
-+ return -ENODEV;
- }
-
-- sch_gpio_core.dev = &pdev->dev;
-- sch_gpio_resume.dev = &pdev->dev;
--
-- err = gpiochip_add(&sch_gpio_core);
-- if (err < 0)
-- goto err_sch_gpio_core;
-+ platform_set_drvdata(pdev, sch);
-
-- err = gpiochip_add(&sch_gpio_resume);
-- if (err < 0)
-- goto err_sch_gpio_resume;
--
-- return 0;
--
--err_sch_gpio_resume:
-- gpiochip_remove(&sch_gpio_core);
--
--err_sch_gpio_core:
-- release_region(res->start, resource_size(res));
-- gpio_ba = 0;
+- int i;
-
-- return err;
-+ return gpiochip_add(&sch->chip);
- }
-
- static int sch_gpio_remove(struct platform_device *pdev)
- {
-- struct resource *res;
-- if (gpio_ba) {
+- if (arch_timers_present & ARCH_CP15_TIMER) {
+- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+- return;
+- }
-
-- gpiochip_remove(&sch_gpio_core);
-- gpiochip_remove(&sch_gpio_resume);
+- arch_timers_present |= ARCH_CP15_TIMER;
+- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+- arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+- arch_timer_detect_rate(NULL, np);
-
-- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+- /*
+- * If we cannot rely on firmware initializing the timer registers then
+- * we should use the physical timers instead.
+- */
+- if (IS_ENABLED(CONFIG_ARM) &&
+- of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
+- arch_timer_use_virtual = false;
-
-- release_region(res->start, resource_size(res));
-- gpio_ba = 0;
-- }
-+ struct sch_gpio *sch = platform_get_drvdata(pdev);
-
-+ gpiochip_remove(&sch->chip);
- return 0;
- }
-
-diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
-index 05c6275..ba98bb5 100644
---- a/drivers/gpio/gpiolib-acpi.c
-+++ b/drivers/gpio/gpiolib-acpi.c
-@@ -287,9 +287,45 @@ void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
+ /*
+ * If HYP mode is available, we know that the physical timer
+ * has been configured to be accessible from PL1. Use it, so
+@@ -730,13 +716,39 @@ static void __init arch_timer_init(struct device_node *np)
+ }
}
- }
-+int acpi_dev_add_driver_gpios(struct acpi_device *adev,
-+ const struct acpi_gpio_mapping *gpios)
-+{
-+ if (adev && gpios) {
-+ adev->driver_gpios = gpios;
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
+- arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+-
+ arch_timer_register();
+ arch_timer_common_init();
+ }
+-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
+-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
+
-+static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
-+ const char *name, int index,
-+ struct acpi_reference_args *args)
++static void __init arch_timer_of_init(struct device_node *np)
+{
-+ const struct acpi_gpio_mapping *gm;
-+
-+ if (!adev->driver_gpios)
-+ return false;
++ int i;
+
-+ for (gm = adev->driver_gpios; gm->name; gm++)
-+ if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
-+ const struct acpi_gpio_params *par = gm->data + index;
++ /*
++ * If we cannot rely on firmware initializing the timer registers then
++ * we should use the physical timers instead.
++ */
++ if (IS_ENABLED(CONFIG_ARM) &&
++ of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
++ arch_timer_use_virtual = false;
+
-+ args->adev = adev;
-+ args->args[0] = par->crs_entry_index;
-+ args->args[1] = par->line_index;
-+ args->args[2] = par->active_low;
-+ args->nargs = 3;
-+ return true;
-+ }
++ if (arch_timers_present & ARCH_CP15_TIMER) {
++ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
++ return;
++ }
+
-+ return false;
-+}
++ arch_timers_present |= ARCH_CP15_TIMER;
++ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
++ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
- struct acpi_gpio_lookup {
- struct acpi_gpio_info info;
- int index;
-+ int pin_index;
- struct gpio_desc *desc;
- int n;
- };
-@@ -303,13 +339,24 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
-
- if (lookup->n++ == lookup->index && !lookup->desc) {
- const struct acpi_resource_gpio *agpio = &ares->data.gpio;
-+ int pin_index = lookup->pin_index;
++ arch_timer_detect_rate(NULL, np);
+
-+ if (pin_index >= agpio->pin_table_length)
-+ return 1;
-
- lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
-- agpio->pin_table[0]);
-+ agpio->pin_table[pin_index]);
- lookup->info.gpioint =
- agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
-- lookup->info.active_low =
-- agpio->polarity == ACPI_ACTIVE_LOW;
++ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+
-+ /*
-+ * ActiveLow is only specified for GpioInt resource. If
-+ * GpioIo is used then the only way to set the flag is
-+ * to use _DSD "gpios" property.
-+ */
-+ if (lookup->info.gpioint)
-+ lookup->info.active_low =
-+ agpio->polarity == ACPI_ACTIVE_LOW;
- }
-
- return 1;
-@@ -317,40 +364,79 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
++ arch_timer_init();
++}
++CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
++CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
- /**
- * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
-- * @dev: pointer to a device to get GPIO from
-+ * @adev: pointer to a ACPI device to get GPIO from
-+ * @propname: Property name of the GPIO (optional)
- * @index: index of GpioIo/GpioInt resource (starting from %0)
- * @info: info pointer to fill in (optional)
- *
-- * Function goes through ACPI resources for @dev and based on @index looks
-+ * Function goes through ACPI resources for @adev and based on @index looks
- * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
- * and returns it. @index matches GpioIo/GpioInt resources only so if there
- * are total %3 GPIO resources, the index goes from %0 to %2.
- *
-+ * If @propname is specified the GPIO is looked using device property. In
-+ * that case @index is used to select the GPIO entry in the property value
-+ * (in case of multiple).
-+ *
- * If the GPIO cannot be translated or there is an error an ERR_PTR is
- * returned.
- *
- * Note: if the GPIO resource has multiple entries in the pin list, this
- * function only returns the first.
- */
--struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
-+struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
-+ const char *propname, int index,
- struct acpi_gpio_info *info)
+ static void __init arch_timer_mem_init(struct device_node *np)
{
- struct acpi_gpio_lookup lookup;
- struct list_head resource_list;
-- struct acpi_device *adev;
-- acpi_handle handle;
-+ bool active_low = false;
- int ret;
-
-- if (!dev)
-- return ERR_PTR(-EINVAL);
--
-- handle = ACPI_HANDLE(dev);
-- if (!handle || acpi_bus_get_device(handle, &adev))
-+ if (!adev)
- return ERR_PTR(-ENODEV);
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.index = index;
-
-+ if (propname) {
-+ struct acpi_reference_args args;
-+
-+ dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
-+
-+ memset(&args, 0, sizeof(args));
-+ ret = acpi_dev_get_property_reference(adev, propname,
-+ index, &args);
-+ if (ret) {
-+ bool found = acpi_get_driver_gpio_data(adev, propname,
-+ index, &args);
-+ if (!found)
-+ return ERR_PTR(ret);
-+ }
+@@ -803,3 +815,71 @@ static void __init arch_timer_mem_init(struct device_node *np)
+ }
+ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+ arch_timer_mem_init);
+
-+ /*
-+ * The property was found and resolved so need to
-+ * lookup the GPIO based on returned args instead.
-+ */
-+ adev = args.adev;
-+ if (args.nargs >= 2) {
-+ lookup.index = args.args[0];
-+ lookup.pin_index = args.args[1];
-+ /*
-+ * 3rd argument, if present is used to
-+ * specify active_low.
-+ */
-+ if (args.nargs >= 3)
-+ active_low = !!args.args[2];
-+ }
++#ifdef CONFIG_ACPI
++static int __init
++map_generic_timer_interrupt(u32 interrupt, u32 flags)
++{
++ int trigger, polarity;
+
-+ dev_dbg(&adev->dev, "GPIO: _DSD returned %s %zd %llu %llu %llu\n",
-+ dev_name(&adev->dev), args.nargs,
-+ args.args[0], args.args[1], args.args[2]);
-+ } else {
-+ dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
-+ }
++ if (!interrupt)
++ return 0;
+
- INIT_LIST_HEAD(&resource_list);
- ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio,
- &lookup);
-@@ -359,8 +445,11 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
-
- acpi_dev_free_resource_list(&resource_list);
-
-- if (lookup.desc && info)
-+ if (lookup.desc && info) {
- *info = lookup.info;
-+ if (active_low)
-+ info->active_low = active_low;
-+ }
-
- return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
- }
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-index e8e98ca..58659db 100644
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -1505,14 +1505,36 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx,
- enum gpio_lookup_flags *flags)
- {
-+ static const char * const suffixes[] = { "gpios", "gpio" };
-+ struct acpi_device *adev = ACPI_COMPANION(dev);
- struct acpi_gpio_info info;
- struct gpio_desc *desc;
-+ char propname[32];
-+ int i;
-
-- desc = acpi_get_gpiod_by_index(dev, idx, &info);
-- if (IS_ERR(desc))
-- return desc;
-+ /* Try first from _DSD */
-+ for (i = 0; i < ARRAY_SIZE(suffixes); i++) {
-+ if (con_id && strcmp(con_id, "gpios")) {
-+ snprintf(propname, sizeof(propname), "%s-%s",
-+ con_id, suffixes[i]);
-+ } else {
-+ snprintf(propname, sizeof(propname), "%s",
-+ suffixes[i]);
-+ }
++ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
++ : ACPI_LEVEL_SENSITIVE;
+
-+ desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
-+ if (!IS_ERR(desc) || (PTR_ERR(desc) == -EPROBE_DEFER))
-+ break;
-+ }
-
-- if (info.gpioint && info.active_low)
-+ /* Then from plain _CRS GPIOs */
-+ if (IS_ERR(desc)) {
-+ desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
-+ if (IS_ERR(desc))
-+ return desc;
-+ }
++ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
++ : ACPI_ACTIVE_HIGH;
+
-+ if (info.active_low)
- *flags |= GPIO_ACTIVE_LOW;
-
- return desc;
-@@ -1713,6 +1735,61 @@ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
- EXPORT_SYMBOL_GPL(__gpiod_get_index);
-
- /**
-+ * fwnode_get_named_gpiod - obtain a GPIO from firmware node
-+ * @fwnode: handle of the firmware node
-+ * @propname: name of the firmware property representing the GPIO
-+ *
-+ * This function can be used for drivers that get their configuration
-+ * from firmware.
-+ *
-+ * Function properly finds the corresponding GPIO using whatever is the
-+ * underlying firmware interface and then makes sure that the GPIO
-+ * descriptor is requested before it is returned to the caller.
-+ *
-+ * In case of error an ERR_PTR() is returned.
-+ */
-+struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
-+ const char *propname)
++ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
++}
++
++/* Initialize per-processor generic timer */
++static int __init arch_timer_acpi_init(struct acpi_table_header *table)
+{
-+ struct gpio_desc *desc = ERR_PTR(-ENODEV);
-+ bool active_low = false;
-+ int ret;
++ struct acpi_table_gtdt *gtdt;
++
++ if (arch_timers_present & ARCH_CP15_TIMER) {
++ pr_warn("arch_timer: already initialized, skipping\n");
++ return -EINVAL;
++ }
+
-+ if (!fwnode)
-+ return ERR_PTR(-EINVAL);
++ gtdt = container_of(table, struct acpi_table_gtdt, header);
+
-+ if (is_of_node(fwnode)) {
-+ enum of_gpio_flags flags;
++ arch_timers_present |= ARCH_CP15_TIMER;
+
-+ desc = of_get_named_gpiod_flags(of_node(fwnode), propname, 0,
-+ &flags);
-+ if (!IS_ERR(desc))
-+ active_low = flags & OF_GPIO_ACTIVE_LOW;
-+ } else if (is_acpi_node(fwnode)) {
-+ struct acpi_gpio_info info;
++ arch_timer_ppi[PHYS_SECURE_PPI] =
++ map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
++ gtdt->secure_el1_flags);
+
-+ desc = acpi_get_gpiod_by_index(acpi_node(fwnode), propname, 0,
-+ &info);
-+ if (!IS_ERR(desc))
-+ active_low = info.active_low;
-+ }
++ arch_timer_ppi[PHYS_NONSECURE_PPI] =
++ map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
++ gtdt->non_secure_el1_flags);
+
-+ if (IS_ERR(desc))
-+ return desc;
++ arch_timer_ppi[VIRT_PPI] =
++ map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
++ gtdt->virtual_timer_flags);
+
-+ ret = gpiod_request(desc, NULL);
-+ if (ret)
-+ return ERR_PTR(ret);
++ arch_timer_ppi[HYP_PPI] =
++ map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
++ gtdt->non_secure_el2_flags);
++
++ /* Get the frequency from CNTFRQ */
++ arch_timer_detect_rate(NULL, NULL);
+
-+ /* Only value flag can be set from both DT and ACPI is active_low */
-+ if (active_low)
-+ set_bit(FLAG_ACTIVE_LOW, &desc->flags);
++ /* Always-on capability */
++ arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+
-+ return desc;
++ arch_timer_init();
++ return 0;
+}
-+EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
+
-+/**
- * gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
- * function
- * @dev: GPIO consumer, can be NULL for system-global GPIOs
-diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
-index 9db2b6a..e3a5211 100644
---- a/drivers/gpio/gpiolib.h
-+++ b/drivers/gpio/gpiolib.h
-@@ -34,7 +34,8 @@ void acpi_gpiochip_remove(struct gpio_chip *chip);
- void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
- void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
-
--struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
-+struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
-+ const char *propname, int index,
- struct acpi_gpio_info *info);
- #else
- static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
-@@ -47,8 +48,8 @@ static inline void
- acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
-
- static inline struct gpio_desc *
--acpi_get_gpiod_by_index(struct device *dev, int index,
-- struct acpi_gpio_info *info)
-+acpi_get_gpiod_by_index(struct acpi_device *adev, const char *propname,
-+ int index, struct acpi_gpio_info *info)
- {
- return ERR_PTR(-ENOSYS);
- }
++/* Initialize all the generic timers presented in GTDT */
++void __init acpi_generic_timer_init(void)
++{
++ if (acpi_disabled)
++ return;
++
++ acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
++}
++#endif
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
-index 432d363..c9c1c8c 100644
+index 90df4df..c9c1c8c 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
-@@ -23,10 +23,9 @@
- #include <linux/ioport.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/gpio_keys.h>
--#include <linux/of.h>
--#include <linux/of_platform.h>
--#include <linux/of_gpio.h>
-+#include <linux/property.h>
-
- #define DRV_NAME "gpio-keys-polled"
-
-@@ -51,15 +50,14 @@ static void gpio_keys_polled_check_state(struct input_dev *input,
- int state;
-
- if (bdata->can_sleep)
-- state = !!gpio_get_value_cansleep(button->gpio);
-+ state = !!gpiod_get_value_cansleep(button->gpiod);
- else
-- state = !!gpio_get_value(button->gpio);
-+ state = !!gpiod_get_value(button->gpiod);
-
- if (state != bdata->last_state) {
- unsigned int type = button->type ?: EV_KEY;
-
-- input_event(input, type, button->code,
-- !!(state ^ button->active_low));
-+ input_event(input, type, button->code, state);
- input_sync(input);
- bdata->count = 0;
- bdata->last_state = state;
-@@ -102,21 +100,15 @@ static void gpio_keys_polled_close(struct input_polled_dev *dev)
- pdata->disable(bdev->dev);
- }
-
--#ifdef CONFIG_OF
- static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct device *dev)
- {
-- struct device_node *node, *pp;
- struct gpio_keys_platform_data *pdata;
- struct gpio_keys_button *button;
-+ struct fwnode_handle *child;
- int error;
- int nbuttons;
-- int i;
--
-- node = dev->of_node;
-- if (!node)
-- return NULL;
-
-- nbuttons = of_get_child_count(node);
-+ nbuttons = device_get_child_node_count(dev);
- if (nbuttons == 0)
- return NULL;
-
-@@ -126,52 +118,44 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
- return ERR_PTR(-ENOMEM);
-
- pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
-- pdata->nbuttons = nbuttons;
-
-- pdata->rep = !!of_get_property(node, "autorepeat", NULL);
-- of_property_read_u32(node, "poll-interval", &pdata->poll_interval);
-+ pdata->rep = device_property_present(dev, "autorepeat");
-+ device_property_read_u32(dev, "poll-interval", &pdata->poll_interval);
-
-- i = 0;
-- for_each_child_of_node(node, pp) {
-- int gpio;
-- enum of_gpio_flags flags;
-+ device_for_each_child_node(dev, child) {
-+ struct gpio_desc *desc;
-
-- if (!of_find_property(pp, "gpios", NULL)) {
-- pdata->nbuttons--;
-- dev_warn(dev, "Found button without gpios\n");
-- continue;
-- }
--
-- gpio = of_get_gpio_flags(pp, 0, &flags);
-- if (gpio < 0) {
-- error = gpio;
-+ desc = devm_get_gpiod_from_child(dev, child);
-+ if (IS_ERR(desc)) {
-+ error = PTR_ERR(desc);
- if (error != -EPROBE_DEFER)
- dev_err(dev,
- "Failed to get gpio flags, error: %d\n",
- error);
-+ fwnode_handle_put(child);
- return ERR_PTR(error);
- }
-
-- button = &pdata->buttons[i++];
--
-- button->gpio = gpio;
-- button->active_low = flags & OF_GPIO_ACTIVE_LOW;
-+ button = &pdata->buttons[pdata->nbuttons++];
-+ button->gpiod = desc;
-
-- if (of_property_read_u32(pp, "linux,code", &button->code)) {
-- dev_err(dev, "Button without keycode: 0x%x\n",
-- button->gpio);
-+ if (fwnode_property_read_u32(child, "linux,code", &button->code)) {
-+ dev_err(dev, "Button without keycode: %d\n",
-+ pdata->nbuttons - 1);
-+ fwnode_handle_put(child);
- return ERR_PTR(-EINVAL);
- }
-
-- button->desc = of_get_property(pp, "label", NULL);
-+ fwnode_property_read_string(child, "label", &button->desc);
-
-- if (of_property_read_u32(pp, "linux,input-type", &button->type))
-+ if (fwnode_property_read_u32(child, "linux,input-type",
-+ &button->type))
- button->type = EV_KEY;
-
-- button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
-+ button->wakeup = fwnode_property_present(child, "gpio-key,wakeup");
-
-- if (of_property_read_u32(pp, "debounce-interval",
-- &button->debounce_interval))
-+ if (fwnode_property_read_u32(child, "debounce-interval",
-+ &button->debounce_interval))
- button->debounce_interval = 5;
- }
-
-@@ -187,15 +171,6 @@ static const struct of_device_id gpio_keys_polled_of_match[] = {
- };
- MODULE_DEVICE_TABLE(of, gpio_keys_polled_of_match);
-
--#else
--
--static inline struct gpio_keys_platform_data *
--gpio_keys_polled_get_devtree_pdata(struct device *dev)
--{
-- return NULL;
--}
--#endif
--
- static int gpio_keys_polled_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -259,7 +234,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
- for (i = 0; i < pdata->nbuttons; i++) {
- struct gpio_keys_button *button = &pdata->buttons[i];
- struct gpio_keys_button_data *bdata = &bdev->data[i];
-- unsigned int gpio = button->gpio;
- unsigned int type = button->type ?: EV_KEY;
-
- if (button->wakeup) {
-@@ -267,15 +241,31 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
- return -EINVAL;
- }
-
-- error = devm_gpio_request_one(&pdev->dev, gpio, GPIOF_IN,
-- button->desc ? : DRV_NAME);
-- if (error) {
-- dev_err(dev, "unable to claim gpio %u, err=%d\n",
-- gpio, error);
-- return error;
-+ /*
-+ * Legacy GPIO number so request the GPIO here and
-+ * convert it to descriptor.
-+ */
-+ if (!button->gpiod && gpio_is_valid(button->gpio)) {
-+ unsigned flags = 0;
-+
-+ if (button->active_low)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ error = devm_gpio_request_one(&pdev->dev, button->gpio,
-+ flags, button->desc ? : DRV_NAME);
-+ if (error) {
-+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
-+ button->gpio, error);
-+ return error;
-+ }
-+
-+ button->gpiod = gpio_to_desc(button->gpio);
- }
-
-- bdata->can_sleep = gpio_cansleep(gpio);
-+ if (IS_ERR(button->gpiod))
-+ return PTR_ERR(button->gpiod);
-+
-+ bdata->can_sleep = gpiod_cansleep(button->gpiod);
- bdata->last_state = -1;
- bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
- pdata->poll_interval);
-@@ -308,7 +298,7 @@ static struct platform_driver gpio_keys_polled_driver = {
+@@ -297,6 +297,7 @@ static struct platform_driver gpio_keys_polled_driver = {
+ .probe = gpio_keys_polled_probe,
.driver = {
.name = DRV_NAME,
- .owner = THIS_MODULE,
-- .of_match_table = of_match_ptr(gpio_keys_polled_of_match),
-+ .of_match_table = gpio_keys_polled_of_match,
++ .owner = THIS_MODULE,
+ .of_match_table = gpio_keys_polled_of_match,
},
};
- module_platform_driver(gpio_keys_polled_driver);
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
-index 60558f7..3b92862 100644
+index 6cd47b7..09f904a 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
-@@ -444,7 +444,10 @@ static struct device_node *dev_get_dev_node(struct device *dev)
+@@ -451,7 +451,10 @@ static struct device_node *dev_get_dev_node(struct device *dev)
while (!pci_is_root_bus(bus))
bus = bus->parent;
@@ -8777,7 +3304,7 @@ index 60558f7..3b92862 100644
}
return dev->of_node;
-@@ -560,6 +563,9 @@ static struct arm_smmu_device *find_smmu_for_device(struct device *dev)
+@@ -567,6 +570,9 @@ static struct arm_smmu_device *find_smmu_for_device(struct device *dev)
struct arm_smmu_master *master = NULL;
struct device_node *dev_node = dev_get_dev_node(dev);
@@ -8788,10 +3315,10 @@ index 60558f7..3b92862 100644
list_for_each_entry(smmu, &arm_smmu_devices, list) {
master = find_smmu_master(smmu, dev_node);
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
-index aa17ae8..d330dab 100644
+index 1a146cc..ab7dfe2 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
-@@ -506,9 +506,19 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+@@ -520,9 +520,19 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
isb();
}
@@ -8812,7 +3339,7 @@ index aa17ae8..d330dab 100644
}
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
-index 38493ff..26e6773 100644
+index d617ee5..da0cd51 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -33,12 +33,14 @@
@@ -8844,7 +3371,7 @@ index 38493ff..26e6773 100644
#endif
#ifdef CONFIG_BL_SWITCHER
-@@ -996,6 +1005,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+@@ -1025,6 +1034,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
#ifdef CONFIG_SMP
set_smp_cross_call(gic_raise_softirq);
register_cpu_notifier(&gic_cpu_notifier);
@@ -8854,7 +3381,7 @@ index 38493ff..26e6773 100644
#endif
set_handle_irq(gic_handle_irq);
}
-@@ -1048,3 +1060,107 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+@@ -1083,3 +1095,109 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
#endif
@@ -8910,7 +3437,8 @@ index 38493ff..26e6773 100644
+ int count;
+
+ /* Collect CPU base addresses */
-+ count = acpi_parse_entries(sizeof(struct acpi_table_madt),
++ count = acpi_parse_entries(ACPI_SIG_MADT,
++ sizeof(struct acpi_table_madt),
+ gic_acpi_parse_madt_cpu, table,
+ ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
+ if (count < 0) {
@@ -8925,7 +3453,8 @@ index 38493ff..26e6773 100644
+ * Find distributor base address. We expect one distributor entry since
+ * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
+ */
-+ count = acpi_parse_entries(sizeof(struct acpi_table_madt),
++ count = acpi_parse_entries(ACPI_SIG_MADT,
++ sizeof(struct acpi_table_madt),
+ gic_acpi_parse_madt_distributor, table,
+ ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
+ if (count <= 0) {
@@ -8982,393 +3511,19 @@ index 0fe2f71..9106c6d 100644
+ acpi_gic_init();
}
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
-index b4518c8..b3c5d9d 100644
+index 7ea1ea42..5fb4440 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
-@@ -12,25 +12,23 @@
- */
- #include <linux/err.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/kernel.h>
- #include <linux/leds.h>
- #include <linux/module.h>
--#include <linux/of.h>
--#include <linux/of_gpio.h>
--#include <linux/of_platform.h>
- #include <linux/platform_device.h>
-+#include <linux/property.h>
- #include <linux/slab.h>
- #include <linux/workqueue.h>
-
- struct gpio_led_data {
- struct led_classdev cdev;
-- unsigned gpio;
-+ struct gpio_desc *gpiod;
- struct work_struct work;
- u8 new_level;
- u8 can_sleep;
-- u8 active_low;
- u8 blinking;
-- int (*platform_gpio_blink_set)(unsigned gpio, int state,
-+ int (*platform_gpio_blink_set)(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off);
- };
-
-@@ -40,12 +38,11 @@ static void gpio_led_work(struct work_struct *work)
- container_of(work, struct gpio_led_data, work);
-
- if (led_dat->blinking) {
-- led_dat->platform_gpio_blink_set(led_dat->gpio,
-- led_dat->new_level,
-- NULL, NULL);
-+ led_dat->platform_gpio_blink_set(led_dat->gpiod,
-+ led_dat->new_level, NULL, NULL);
- led_dat->blinking = 0;
- } else
-- gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
-+ gpiod_set_value_cansleep(led_dat->gpiod, led_dat->new_level);
- }
-
- static void gpio_led_set(struct led_classdev *led_cdev,
-@@ -60,9 +57,6 @@ static void gpio_led_set(struct led_classdev *led_cdev,
- else
- level = 1;
-
-- if (led_dat->active_low)
-- level = !level;
--
- /* Setting GPIOs with I2C/etc requires a task context, and we don't
- * seem to have a reliable way to know if we're already in one; so
- * let's just assume the worst.
-@@ -72,11 +66,11 @@ static void gpio_led_set(struct led_classdev *led_cdev,
- schedule_work(&led_dat->work);
- } else {
- if (led_dat->blinking) {
-- led_dat->platform_gpio_blink_set(led_dat->gpio, level,
-+ led_dat->platform_gpio_blink_set(led_dat->gpiod, level,
- NULL, NULL);
- led_dat->blinking = 0;
- } else
-- gpio_set_value(led_dat->gpio, level);
-+ gpiod_set_value(led_dat->gpiod, level);
- }
- }
-
-@@ -87,34 +81,49 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
- container_of(led_cdev, struct gpio_led_data, cdev);
-
- led_dat->blinking = 1;
-- return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
-+ return led_dat->platform_gpio_blink_set(led_dat->gpiod, GPIO_LED_BLINK,
- delay_on, delay_off);
- }
-
- static int create_gpio_led(const struct gpio_led *template,
- struct gpio_led_data *led_dat, struct device *parent,
-- int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
-+ int (*blink_set)(struct gpio_desc *, int, unsigned long *,
-+ unsigned long *))
- {
- int ret, state;
-
-- led_dat->gpio = -1;
-+ led_dat->gpiod = template->gpiod;
-+ if (!led_dat->gpiod) {
-+ /*
-+ * This is the legacy code path for platform code that
-+ * still uses GPIO numbers. Ultimately we would like to get
-+ * rid of this block completely.
-+ */
-+ unsigned long flags = 0;
-+
-+ /* skip leds that aren't available */
-+ if (!gpio_is_valid(template->gpio)) {
-+ dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
-+ template->gpio, template->name);
-+ return 0;
-+ }
-
-- /* skip leds that aren't available */
-- if (!gpio_is_valid(template->gpio)) {
-- dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
-- template->gpio, template->name);
-- return 0;
-- }
-+ if (template->active_low)
-+ flags |= GPIOF_ACTIVE_LOW;
-
-- ret = devm_gpio_request(parent, template->gpio, template->name);
-- if (ret < 0)
-- return ret;
-+ ret = devm_gpio_request_one(parent, template->gpio, flags,
-+ template->name);
-+ if (ret < 0)
-+ return ret;
-+
-+ led_dat->gpiod = gpio_to_desc(template->gpio);
-+ if (IS_ERR(led_dat->gpiod))
-+ return PTR_ERR(led_dat->gpiod);
-+ }
-
- led_dat->cdev.name = template->name;
- led_dat->cdev.default_trigger = template->default_trigger;
-- led_dat->gpio = template->gpio;
-- led_dat->can_sleep = gpio_cansleep(template->gpio);
-- led_dat->active_low = template->active_low;
-+ led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
- led_dat->blinking = 0;
- if (blink_set) {
- led_dat->platform_gpio_blink_set = blink_set;
-@@ -122,30 +131,24 @@ static int create_gpio_led(const struct gpio_led *template,
- }
- led_dat->cdev.brightness_set = gpio_led_set;
- if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
-- state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low;
-+ state = !!gpiod_get_value_cansleep(led_dat->gpiod);
- else
- state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
- led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
- if (!template->retain_state_suspended)
- led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
-
-- ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
-+ ret = gpiod_direction_output(led_dat->gpiod, state);
- if (ret < 0)
- return ret;
-
- INIT_WORK(&led_dat->work, gpio_led_work);
-
-- ret = led_classdev_register(parent, &led_dat->cdev);
-- if (ret < 0)
-- return ret;
--
-- return 0;
-+ return led_classdev_register(parent, &led_dat->cdev);
- }
-
- static void delete_gpio_led(struct gpio_led_data *led)
- {
-- if (!gpio_is_valid(led->gpio))
-- return;
- led_classdev_unregister(&led->cdev);
- cancel_work_sync(&led->work);
- }
-@@ -161,40 +164,37 @@ static inline int sizeof_gpio_leds_priv(int num_leds)
- (sizeof(struct gpio_led_data) * num_leds);
- }
-
--/* Code to create from OpenFirmware platform devices */
--#ifdef CONFIG_OF_GPIO
--static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
-+static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
- {
-- struct device_node *np = pdev->dev.of_node, *child;
-+ struct device *dev = &pdev->dev;
-+ struct fwnode_handle *child;
- struct gpio_leds_priv *priv;
- int count, ret;
-
-- /* count LEDs in this device, so we know how much to allocate */
-- count = of_get_available_child_count(np);
-+ count = device_get_child_node_count(dev);
- if (!count)
- return ERR_PTR(-ENODEV);
-
-- for_each_available_child_of_node(np, child)
-- if (of_get_gpio(child, 0) == -EPROBE_DEFER)
-- return ERR_PTR(-EPROBE_DEFER);
--
-- priv = devm_kzalloc(&pdev->dev, sizeof_gpio_leds_priv(count),
-- GFP_KERNEL);
-+ priv = devm_kzalloc(dev, sizeof_gpio_leds_priv(count), GFP_KERNEL);
- if (!priv)
- return ERR_PTR(-ENOMEM);
-
-- for_each_available_child_of_node(np, child) {
-+ device_for_each_child_node(dev, child) {
- struct gpio_led led = {};
-- enum of_gpio_flags flags;
-- const char *state;
--
-- led.gpio = of_get_gpio_flags(child, 0, &flags);
-- led.active_low = flags & OF_GPIO_ACTIVE_LOW;
-- led.name = of_get_property(child, "label", NULL) ? : child->name;
-- led.default_trigger =
-- of_get_property(child, "linux,default-trigger", NULL);
-- state = of_get_property(child, "default-state", NULL);
-- if (state) {
-+ const char *state = NULL;
-+
-+ led.gpiod = devm_get_gpiod_from_child(dev, child);
-+ if (IS_ERR(led.gpiod)) {
-+ fwnode_handle_put(child);
-+ goto err;
-+ }
-+
-+ fwnode_property_read_string(child, "label", &led.name);
-+ fwnode_property_read_string(child, "linux,default-trigger",
-+ &led.default_trigger);
-+
-+ if (!fwnode_property_read_string(child, "linux,default_state",
-+ &state)) {
- if (!strcmp(state, "keep"))
- led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
- else if (!strcmp(state, "on"))
-@@ -203,13 +203,13 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
- led.default_state = LEDS_GPIO_DEFSTATE_OFF;
- }
-
-- if (of_get_property(child, "retain-state-suspended", NULL))
-+ if (fwnode_property_present(child, "retain-state-suspended"))
- led.retain_state_suspended = 1;
-
- ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
-- &pdev->dev, NULL);
-+ dev, NULL);
- if (ret < 0) {
-- of_node_put(child);
-+ fwnode_handle_put(child);
- goto err;
- }
- }
-@@ -228,12 +228,6 @@ static const struct of_device_id of_gpio_leds_match[] = {
- };
-
- MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
--#else /* CONFIG_OF_GPIO */
--static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
--{
-- return ERR_PTR(-ENODEV);
--}
--#endif /* CONFIG_OF_GPIO */
-
- static int gpio_led_probe(struct platform_device *pdev)
- {
-@@ -261,7 +255,7 @@ static int gpio_led_probe(struct platform_device *pdev)
- }
- }
- } else {
-- priv = gpio_leds_create_of(pdev);
-+ priv = gpio_leds_create(pdev);
- if (IS_ERR(priv))
- return PTR_ERR(priv);
- }
-@@ -288,7 +282,7 @@ static struct platform_driver gpio_led_driver = {
+@@ -291,6 +291,7 @@ static struct platform_driver gpio_led_driver = {
+ .remove = gpio_led_remove,
.driver = {
.name = "leds-gpio",
- .owner = THIS_MODULE,
-- .of_match_table = of_match_ptr(of_gpio_leds_match),
-+ .of_match_table = of_gpio_leds_match,
++ .owner = THIS_MODULE,
+ .of_match_table = of_gpio_leds_match,
},
};
-
-diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
-index 634f729..0a1af93 100644
---- a/drivers/misc/eeprom/at25.c
-+++ b/drivers/misc/eeprom/at25.c
-@@ -18,7 +18,7 @@
-
- #include <linux/spi/spi.h>
- #include <linux/spi/eeprom.h>
--#include <linux/of.h>
-+#include <linux/property.h>
-
- /*
- * NOTE: this is an *EEPROM* driver. The vagaries of product naming
-@@ -301,35 +301,33 @@ static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
-
- /*-------------------------------------------------------------------------*/
-
--static int at25_np_to_chip(struct device *dev,
-- struct device_node *np,
-- struct spi_eeprom *chip)
-+static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
- {
- u32 val;
-
- memset(chip, 0, sizeof(*chip));
-- strncpy(chip->name, np->name, sizeof(chip->name));
-+ strncpy(chip->name, "at25", sizeof(chip->name));
-
-- if (of_property_read_u32(np, "size", &val) == 0 ||
-- of_property_read_u32(np, "at25,byte-len", &val) == 0) {
-+ if (device_property_read_u32(dev, "size", &val) == 0 ||
-+ device_property_read_u32(dev, "at25,byte-len", &val) == 0) {
- chip->byte_len = val;
- } else {
- dev_err(dev, "Error: missing \"size\" property\n");
- return -ENODEV;
- }
-
-- if (of_property_read_u32(np, "pagesize", &val) == 0 ||
-- of_property_read_u32(np, "at25,page-size", &val) == 0) {
-+ if (device_property_read_u32(dev, "pagesize", &val) == 0 ||
-+ device_property_read_u32(dev, "at25,page-size", &val) == 0) {
- chip->page_size = (u16)val;
- } else {
- dev_err(dev, "Error: missing \"pagesize\" property\n");
- return -ENODEV;
- }
-
-- if (of_property_read_u32(np, "at25,addr-mode", &val) == 0) {
-+ if (device_property_read_u32(dev, "at25,addr-mode", &val) == 0) {
- chip->flags = (u16)val;
- } else {
-- if (of_property_read_u32(np, "address-width", &val)) {
-+ if (device_property_read_u32(dev, "address-width", &val)) {
- dev_err(dev,
- "Error: missing \"address-width\" property\n");
- return -ENODEV;
-@@ -350,7 +348,7 @@ static int at25_np_to_chip(struct device *dev,
- val);
- return -ENODEV;
- }
-- if (of_find_property(np, "read-only", NULL))
-+ if (device_property_present(dev, "read-only"))
- chip->flags |= EE_READONLY;
- }
- return 0;
-@@ -360,21 +358,15 @@ static int at25_probe(struct spi_device *spi)
- {
- struct at25_data *at25 = NULL;
- struct spi_eeprom chip;
-- struct device_node *np = spi->dev.of_node;
- int err;
- int sr;
- int addrlen;
-
- /* Chip description */
- if (!spi->dev.platform_data) {
-- if (np) {
-- err = at25_np_to_chip(&spi->dev, np, &chip);
-- if (err)
-- return err;
-- } else {
-- dev_err(&spi->dev, "Error: no chip description\n");
-- return -ENODEV;
-- }
-+ err = at25_fw_to_chip(&spi->dev, &chip);
-+ if (err)
-+ return err;
- } else
- chip = *(struct spi_eeprom *)spi->dev.platform_data;
-
-diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
-index 8319c99..6feb6ef3 100644
---- a/drivers/net/ethernet/amd/Kconfig
-+++ b/drivers/net/ethernet/amd/Kconfig
-@@ -179,7 +179,7 @@ config SUNLANCE
-
- config AMD_XGBE
- tristate "AMD 10GbE Ethernet driver"
-- depends on OF_NET
-+ depends on OF_NET || ACPI
- select PHYLIB
- select AMD_XGBE_PHY
- select BITREVERSE
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
-index 9da3a03..a34cad2 100644
+index 53f5f66..3957e63 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -130,7 +130,7 @@ static unsigned int xgbe_usec_to_riwt(struct xgbe_prv_data *pdata,
@@ -9389,7 +3544,7 @@ index 9da3a03..a34cad2 100644
/*
* Convert the input watchdog timer value to the usec value. Each
-@@ -695,6 +695,18 @@ static int xgbe_read_mmd_regs(struct xgbe_prv_data *pdata, int prtad,
+@@ -854,6 +854,18 @@ static int xgbe_read_mmd_regs(struct xgbe_prv_data *pdata, int prtad,
else
mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
@@ -9408,22 +3563,8 @@ index 9da3a03..a34cad2 100644
/* The PCS registers are accessed using mmio. The underlying APB3
* management interface uses indirect addressing to access the MMD
* register sets. This requires accessing of the PCS register in two
-diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
-index 2349ea9..a04b18b 100644
---- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
-+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
-@@ -425,6 +425,9 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata)
- hw_feat->rx_ch_cnt++;
- hw_feat->tx_ch_cnt++;
-
-+ /* A0 does not support NUMTC, hardcode it for now */
-+ hw_feat->tc_cnt = XGBE_TC_CNT;
-+
- DBGPR("<--xgbe_get_all_hw_features\n");
- }
-
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
-index f5a8fa0..338c0ed 100644
+index dbd3850..74be78e 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -124,6 +124,7 @@
@@ -9434,7 +3575,7 @@ index f5a8fa0..338c0ed 100644
#include "xgbe.h"
#include "xgbe-common.h"
-@@ -215,6 +216,205 @@ static void xgbe_init_all_fptrs(struct xgbe_prv_data *pdata)
+@@ -161,6 +162,205 @@ static void xgbe_init_all_fptrs(struct xgbe_prv_data *pdata)
xgbe_init_function_ptrs_desc(&pdata->desc_if);
}
@@ -9640,16 +3781,7 @@ index f5a8fa0..338c0ed 100644
static int xgbe_probe(struct platform_device *pdev)
{
struct xgbe_prv_data *pdata;
-@@ -222,8 +422,6 @@ static int xgbe_probe(struct platform_device *pdev)
- struct xgbe_desc_if *desc_if;
- struct net_device *netdev;
- struct device *dev = &pdev->dev;
-- struct resource *res;
-- const u8 *mac_addr;
- int ret;
-
- DBGPR("--> xgbe_probe\n");
-@@ -239,6 +437,7 @@ static int xgbe_probe(struct platform_device *pdev)
+@@ -186,6 +386,7 @@ static int xgbe_probe(struct platform_device *pdev)
pdata = netdev_priv(netdev);
pdata->netdev = netdev;
pdata->pdev = pdev;
@@ -9657,7 +3789,7 @@ index f5a8fa0..338c0ed 100644
pdata->dev = dev;
platform_set_drvdata(pdev, netdev);
-@@ -264,40 +463,13 @@ static int xgbe_probe(struct platform_device *pdev)
+@@ -212,40 +413,13 @@ static int xgbe_probe(struct platform_device *pdev)
goto err_io;
}
@@ -9704,34 +3836,20 @@ index f5a8fa0..338c0ed 100644
/* Set the DMA mask */
if (!dev->dma_mask)
-@@ -308,23 +480,16 @@ static int xgbe_probe(struct platform_device *pdev)
- goto err_io;
- }
-
-- if (of_property_read_bool(dev->of_node, "dma-coherent")) {
-- pdata->axdomain = XGBE_DMA_OS_AXDOMAIN;
-- pdata->arcache = XGBE_DMA_OS_ARCACHE;
-- pdata->awcache = XGBE_DMA_OS_AWCACHE;
-- } else {
-- pdata->axdomain = XGBE_DMA_SYS_AXDOMAIN;
-- pdata->arcache = XGBE_DMA_SYS_ARCACHE;
-- pdata->awcache = XGBE_DMA_SYS_AWCACHE;
-- }
--
-+ /* Get the device interrupt */
- ret = platform_get_irq(pdev, 0);
- if (ret < 0) {
- dev_err(dev, "platform_get_irq failed\n");
+@@ -275,10 +449,12 @@ static int xgbe_probe(struct platform_device *pdev)
+ dev_err(dev, "platform_get_irq 0 failed\n");
goto err_io;
}
+
- netdev->irq = ret;
+ pdata->dev_irq = ret;
+
+ netdev->irq = pdata->dev_irq;
netdev->base_addr = (unsigned long)pdata->xgmac_regs;
+ memcpy(netdev->dev_addr, pdata->mac_addr, netdev->addr_len);
/* Set all the function pointers */
xgbe_init_all_fptrs(pdata);
-@@ -337,23 +502,6 @@ static int xgbe_probe(struct platform_device *pdev)
+@@ -291,23 +467,6 @@ static int xgbe_probe(struct platform_device *pdev)
/* Populate the hardware features */
xgbe_get_all_hw_features(pdata);
@@ -9755,7 +3873,7 @@ index f5a8fa0..338c0ed 100644
/* Set default configuration data */
xgbe_default_config(pdata);
-@@ -531,10 +679,22 @@ static int xgbe_resume(struct device *dev)
+@@ -491,10 +650,22 @@ static int xgbe_resume(struct device *dev)
}
#endif /* CONFIG_PM */
@@ -9778,7 +3896,7 @@ index f5a8fa0..338c0ed 100644
MODULE_DEVICE_TABLE(of, xgbe_of_match);
static SIMPLE_DEV_PM_OPS(xgbe_pm_ops, xgbe_suspend, xgbe_resume);
-@@ -542,7 +702,12 @@ static SIMPLE_DEV_PM_OPS(xgbe_pm_ops, xgbe_suspend, xgbe_resume);
+@@ -502,7 +673,12 @@ static SIMPLE_DEV_PM_OPS(xgbe_pm_ops, xgbe_suspend, xgbe_resume);
static struct platform_driver xgbe_driver = {
.driver = {
.name = "amd-xgbe",
@@ -9885,12 +4003,12 @@ index a1bf9d1c..fa67203 100644
/* Setup the timecounter */
cc->read = xgbe_cc_read;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
-index 789957d..59498eb 100644
+index f9ec762..6f3a39e 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
-@@ -172,6 +172,12 @@
- #define XGBE_DMA_CLOCK "dma_clk"
+@@ -187,6 +187,12 @@
#define XGBE_PTP_CLOCK "ptp_clk"
+ #define XGBE_DMA_IRQS "amd,per-channel-interrupt"
+/* ACPI property names */
+#define XGBE_ACPI_MAC_ADDR "mac-address"
@@ -9901,7 +4019,7 @@ index 789957d..59498eb 100644
/* Timestamp support - values based on 50MHz PTP clock
* 50MHz => 20 nsec
*/
-@@ -186,8 +192,11 @@
+@@ -201,8 +207,11 @@
#define XGBE_FIFO_SIZE_B(x) (x)
#define XGBE_FIFO_SIZE_KB(x) (x * 1024)
@@ -9913,7 +4031,7 @@ index 789957d..59498eb 100644
/* Helper macro for descriptor handling
* Always use XGBE_GET_DESC_DATA to access the descriptor data
* since the index is free-running and needs to be and-ed
-@@ -569,6 +578,7 @@ struct xgbe_hw_features {
+@@ -650,6 +659,7 @@ struct xgbe_hw_features {
struct xgbe_prv_data {
struct net_device *netdev;
struct platform_device *pdev;
@@ -9921,7 +4039,7 @@ index 789957d..59498eb 100644
struct device *dev;
/* XGMAC/XPCS related mmio registers */
-@@ -649,6 +659,7 @@ struct xgbe_prv_data {
+@@ -739,6 +749,7 @@ struct xgbe_prv_data {
unsigned int phy_rx_pause;
/* Netdev related settings */
@@ -9929,7 +4047,7 @@ index 789957d..59498eb 100644
netdev_features_t netdev_features;
struct napi_struct napi;
struct xgbe_mmc_stats mmc_stats;
-@@ -658,7 +669,9 @@ struct xgbe_prv_data {
+@@ -748,7 +759,9 @@ struct xgbe_prv_data {
/* Device clocks */
struct clk *sysclk;
@@ -10047,7 +4165,7 @@ index 7ba83ff..29aad5e 100644
netdev_err(ndev, "Failed to register MDIO bus\n");
mdiobus_free(mdio_bus);
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
-index 1236696..f66598a 100644
+index 83a5028..f66598a 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -746,6 +746,42 @@ static const struct net_device_ops xgene_ndev_ops = {
@@ -10093,34 +4211,46 @@ index 1236696..f66598a 100644
static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
{
struct platform_device *pdev;
-@@ -761,6 +797,8 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
+@@ -761,6 +797,12 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
ndev = pdata->ndev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "enet_csr");
+ if (!res)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "Resource enet_csr not defined\n");
- return -ENODEV;
-@@ -772,6 +810,8 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
++ if (!res) {
++ dev_err(dev, "Resource enet_csr not defined\n");
++ return -ENODEV;
++ }
+ pdata->base_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pdata->base_addr)) {
+ dev_err(dev, "Unable to retrieve ENET Port CSR region\n");
+@@ -768,6 +810,12 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ring_csr");
+ if (!res)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- dev_err(dev, "Resource ring_csr not defined\n");
- return -ENODEV;
-@@ -783,6 +823,8 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
++ if (!res) {
++ dev_err(dev, "Resource ring_csr not defined\n");
++ return -ENODEV;
++ }
+ pdata->ring_csr_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pdata->ring_csr_addr)) {
+ dev_err(dev, "Unable to retrieve ENET Ring CSR region\n");
+@@ -775,6 +823,12 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ring_cmd");
+ if (!res)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- if (!res) {
- dev_err(dev, "Resource ring_cmd not defined\n");
- return -ENODEV;
-@@ -804,11 +846,13 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
++ if (!res) {
++ dev_err(dev, "Resource ring_cmd not defined\n");
++ return -ENODEV;
++ }
+ pdata->ring_cmd_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pdata->ring_cmd_addr)) {
+ dev_err(dev, "Unable to retrieve ENET Ring command region\n");
+@@ -792,11 +846,13 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
mac = of_get_mac_address(dev->of_node);
if (mac)
memcpy(ndev->dev_addr, mac, ndev->addr_len);
@@ -10135,7 +4265,7 @@ index 1236696..f66598a 100644
if (pdata->phy_mode < 0) {
dev_err(dev, "Unable to get phy-connection-type\n");
return pdata->phy_mode;
-@@ -821,11 +865,12 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
+@@ -809,11 +865,12 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
}
pdata->clk = devm_clk_get(&pdev->dev, NULL);
@@ -10152,7 +4282,7 @@ index 1236696..f66598a 100644
}
base_addr = pdata->base_addr;
-@@ -875,7 +920,7 @@ static int xgene_enet_init_hw(struct xgene_enet_pdata *pdata)
+@@ -863,7 +920,7 @@ static int xgene_enet_init_hw(struct xgene_enet_pdata *pdata)
pdata->port_ops->cle_bypass(pdata, dst_ring_num, buf_pool->id);
pdata->mac_ops->init(pdata);
@@ -10161,7 +4291,7 @@ index 1236696..f66598a 100644
}
static void xgene_enet_setup_ops(struct xgene_enet_pdata *pdata)
-@@ -936,7 +981,7 @@ static int xgene_enet_probe(struct platform_device *pdev)
+@@ -924,7 +981,7 @@ static int xgene_enet_probe(struct platform_device *pdev)
goto err;
}
@@ -10170,7 +4300,7 @@ index 1236696..f66598a 100644
if (ret) {
netdev_err(ndev, "No usable DMA configuration\n");
goto err;
-@@ -984,6 +1029,14 @@ static int xgene_enet_remove(struct platform_device *pdev)
+@@ -972,6 +1029,14 @@ static int xgene_enet_remove(struct platform_device *pdev)
return 0;
}
@@ -10185,7 +4315,7 @@ index 1236696..f66598a 100644
static struct of_device_id xgene_enet_match[] = {
{.compatible = "apm,xgene-enet",},
{},
-@@ -995,6 +1048,7 @@ static struct platform_driver xgene_enet_driver = {
+@@ -983,6 +1048,7 @@ static struct platform_driver xgene_enet_driver = {
.driver = {
.name = "xgene-enet",
.of_match_table = xgene_enet_match,
@@ -10206,7 +4336,7 @@ index f9958fa..0e06cad 100644
#define XGENE_DRV_VERSION "v1.0"
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
-index 6cc3cf6..91c36a2 100644
+index 88a55f9..944b177 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -82,6 +82,7 @@ static const char version[] =
@@ -10232,29 +4362,16 @@ index 6cc3cf6..91c36a2 100644
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
.remove = smc_drv_remove,
-@@ -2475,6 +2484,7 @@ static struct platform_driver smc_driver = {
- .owner = THIS_MODULE,
+@@ -2474,6 +2483,7 @@ static struct platform_driver smc_driver = {
+ .name = CARDNAME,
.pm = &smc_drv_pm_ops,
.of_match_table = of_match_ptr(smc91x_match),
+ .acpi_match_table = ACPI_PTR(smc91x_acpi_match),
},
};
-diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
-index 75472cf7..bacafe2 100644
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -26,7 +26,7 @@ config AMD_PHY
-
- config AMD_XGBE_PHY
- tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
-- depends on OF
-+ depends on OF || ACPI
- ---help---
- Currently supports the AMD 10GbE PHY
-
diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c
-index c456559..d852c6e 100644
+index 903dc3d..fcc4fc7 100644
--- a/drivers/net/phy/amd-xgbe-phy.c
+++ b/drivers/net/phy/amd-xgbe-phy.c
@@ -74,15 +74,19 @@
@@ -10962,7 +5079,7 @@ index c456559..d852c6e 100644
netdev_info(phydev->attached_dev, "%s successful\n",
an_supported ? "Auto negotiation"
: "Parallel detection");
-@@ -1069,6 +1010,7 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
+@@ -1070,6 +1011,7 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
u32 mmd_mask = phydev->c45_ids.devices_in_package;
@@ -10970,7 +5087,7 @@ index c456559..d852c6e 100644
if (phydev->autoneg != AUTONEG_ENABLE)
return amd_xgbe_phy_setup_forced(phydev);
-@@ -1077,6 +1019,11 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
+@@ -1078,6 +1020,11 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
if (!(mmd_mask & MDIO_DEVS_AN))
return -EINVAL;
@@ -10982,7 +5099,7 @@ index c456559..d852c6e 100644
/* Start/Restart the auto-negotiation state machine */
mutex_lock(&priv->an_mutex);
priv->an_result = AMD_XGBE_AN_READY;
-@@ -1166,14 +1113,18 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
+@@ -1167,14 +1114,18 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
u32 mmd_mask = phydev->c45_ids.devices_in_package;
@@ -11004,7 +5121,7 @@ index c456559..d852c6e 100644
if (!(mmd_mask & MDIO_DEVS_AN))
return -EINVAL;
-@@ -1204,39 +1155,40 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
+@@ -1205,39 +1156,40 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
ad_ret &= lp_ret;
if (ad_ret & 0x80) {
phydev->speed = SPEED_10000;
@@ -11065,7 +5182,7 @@ index c456559..d852c6e 100644
}
phydev->duplex = DUPLEX_FULL;
phydev->pause = 0;
-@@ -1288,29 +1240,188 @@ unlock:
+@@ -1289,29 +1241,188 @@ unlock:
return ret;
}
@@ -11266,7 +5383,7 @@ index c456559..d852c6e 100644
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
-@@ -1318,86 +1429,54 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
+@@ -1319,86 +1430,54 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
goto err_name;
}
@@ -11375,7 +5492,7 @@ index c456559..d852c6e 100644
err_priv:
devm_kfree(dev, priv);
-@@ -1405,9 +1484,6 @@ err_priv:
+@@ -1406,9 +1485,6 @@ err_priv:
err_name:
kfree(wq_name);
@@ -11385,7 +5502,7 @@ index c456559..d852c6e 100644
return ret;
}
-@@ -1424,18 +1500,7 @@ static void amd_xgbe_phy_remove(struct phy_device *phydev)
+@@ -1425,18 +1501,7 @@ static void amd_xgbe_phy_remove(struct phy_device *phydev)
flush_workqueue(priv->an_workqueue);
destroy_workqueue(priv->an_workqueue);
@@ -11405,52 +5522,8 @@ index c456559..d852c6e 100644
devm_kfree(dev, priv);
}
-diff --git a/drivers/of/base.c b/drivers/of/base.c
-index 3823edf..4c2ccde 100644
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -1250,6 +1250,39 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
- EXPORT_SYMBOL_GPL(of_property_read_u64);
-
- /**
-+ * of_property_read_u64_array - Find and read an array of 64 bit integers
-+ * from a property.
-+ *
-+ * @np: device node from which the property value is to be read.
-+ * @propname: name of the property to be searched.
-+ * @out_values: pointer to return value, modified only if return value is 0.
-+ * @sz: number of array elements to read
-+ *
-+ * Search for a property in a device node and read 64-bit value(s) from
-+ * it. Returns 0 on success, -EINVAL if the property does not exist,
-+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
-+ * property data isn't large enough.
-+ *
-+ * The out_values is modified only if a valid u64 value can be decoded.
-+ */
-+int of_property_read_u64_array(const struct device_node *np,
-+ const char *propname, u64 *out_values,
-+ size_t sz)
-+{
-+ const __be32 *val = of_find_property_value_of_size(np, propname,
-+ (sz * sizeof(*out_values)));
-+
-+ if (IS_ERR(val))
-+ return PTR_ERR(val);
-+
-+ while (sz--) {
-+ *out_values++ = of_read_number(val, 2);
-+ val += 2;
-+ }
-+ return 0;
-+}
-+
-+/**
- * of_property_read_string - Find and read a string from a property
- * @np: device node from which the property value is to be read.
- * @propname: name of the property to be searched.
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
-index 2988fe1..9029d59c 100644
+index b1d0596..06b8f97 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -29,6 +29,7 @@
@@ -12052,10 +6125,10 @@ index 0000000..0f44624
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
-index beea6ca..7038a2d 100644
+index 555de07..3991aa0 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
-@@ -310,10 +310,18 @@ static int dw8250_probe_of(struct uart_port *p,
+@@ -351,10 +351,18 @@ static int dw8250_probe_of(struct uart_port *p,
static int dw8250_probe_acpi(struct uart_8250_port *up,
struct dw8250_data *data)
{
@@ -12074,7 +6147,7 @@ index beea6ca..7038a2d 100644
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
-@@ -536,6 +544,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
+@@ -577,6 +585,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT3435", 0 },
{ "80860F0A", 0 },
{ "8086228A", 0 },
@@ -12083,7 +6156,7 @@ index beea6ca..7038a2d 100644
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
-index ef9a165..9f1939c 100644
+index 00d115b..cd9b974 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -100,8 +100,7 @@
@@ -12096,7 +6169,7 @@ index ef9a165..9f1939c 100644
/* The alignment to use between consumer and producer parts of vring.
* Currently hardcoded to the page size. */
-@@ -634,6 +633,14 @@ static struct of_device_id virtio_mmio_match[] = {
+@@ -635,12 +634,21 @@ static struct of_device_id virtio_mmio_match[] = {
};
MODULE_DEVICE_TABLE(of, virtio_mmio_match);
@@ -12111,39 +6184,18 @@ index ef9a165..9f1939c 100644
static struct platform_driver virtio_mmio_driver = {
.probe = virtio_mmio_probe,
.remove = virtio_mmio_remove,
-@@ -641,6 +648,7 @@ static struct platform_driver virtio_mmio_driver = {
+ .driver = {
.name = "virtio-mmio",
- .owner = THIS_MODULE,
.of_match_table = virtio_mmio_match,
+ .acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
},
};
-diff --git a/drivers/xen/efi.c b/drivers/xen/efi.c
-index 1f850c9..f745db2 100644
---- a/drivers/xen/efi.c
-+++ b/drivers/xen/efi.c
-@@ -294,6 +294,7 @@ static const struct efi efi_xen __initconst = {
- .acpi = EFI_INVALID_TABLE_ADDR,
- .acpi20 = EFI_INVALID_TABLE_ADDR,
- .smbios = EFI_INVALID_TABLE_ADDR,
-+ .smbios3 = EFI_INVALID_TABLE_ADDR,
- .sal_systab = EFI_INVALID_TABLE_ADDR,
- .boot_info = EFI_INVALID_TABLE_ADDR,
- .hcdp = EFI_INVALID_TABLE_ADDR,
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
-index f34a083..04d02fc 100644
+index 61e32ec..1fec6f5 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
-@@ -27,6 +27,7 @@
- #define __ACPI_BUS_H__
-
- #include <linux/device.h>
-+#include <linux/property.h>
-
- /* TBD: Make dynamic */
- #define ACPI_MAX_HANDLES 10
-@@ -68,6 +69,8 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs);
+@@ -69,6 +69,8 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs);
union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const u8 *uuid,
int rev, int func, union acpi_object *argv4);
@@ -12152,61 +6204,6 @@ index f34a083..04d02fc 100644
static inline union acpi_object *
acpi_evaluate_dsm_typed(acpi_handle handle, const u8 *uuid, int rev, int func,
union acpi_object *argv4, acpi_object_type type)
-@@ -337,10 +340,20 @@ struct acpi_device_physical_node {
- bool put_online:1;
- };
-
-+/* ACPI Device Specific Data (_DSD) */
-+struct acpi_device_data {
-+ const union acpi_object *pointer;
-+ const union acpi_object *properties;
-+ const union acpi_object *of_compatible;
-+};
-+
-+struct acpi_gpio_mapping;
-+
- /* Device */
- struct acpi_device {
- int device_type;
- acpi_handle handle; /* no handle for fixed hardware */
-+ struct fwnode_handle fwnode;
- struct acpi_device *parent;
- struct list_head children;
- struct list_head node;
-@@ -353,9 +366,11 @@ struct acpi_device {
- struct acpi_device_wakeup wakeup;
- struct acpi_device_perf performance;
- struct acpi_device_dir dir;
-+ struct acpi_device_data data;
- struct acpi_scan_handler *handler;
- struct acpi_hotplug_context *hp;
- struct acpi_driver *driver;
-+ const struct acpi_gpio_mapping *driver_gpios;
- void *driver_data;
- struct device dev;
- unsigned int physical_node_count;
-@@ -364,6 +379,21 @@ struct acpi_device {
- void (*remove)(struct acpi_device *);
- };
-
-+static inline bool is_acpi_node(struct fwnode_handle *fwnode)
-+{
-+ return fwnode && fwnode->type == FWNODE_ACPI;
-+}
-+
-+static inline struct acpi_device *acpi_node(struct fwnode_handle *fwnode)
-+{
-+ return fwnode ? container_of(fwnode, struct acpi_device, fwnode) : NULL;
-+}
-+
-+static inline struct fwnode_handle *acpi_fwnode_handle(struct acpi_device *adev)
-+{
-+ return &adev->fwnode;
-+}
-+
- static inline void *acpi_driver_data(struct acpi_device *d)
- {
- return d->driver_data;
diff --git a/include/acpi/acpi_io.h b/include/acpi/acpi_io.h
index 444671e..9d573db 100644
--- a/include/acpi/acpi_io.h
@@ -12230,10 +6227,10 @@ index 444671e..9d573db 100644
}
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
-index aa70cbd..1261fef 100644
+index bee5d68..140d514 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
-@@ -275,6 +275,13 @@
+@@ -276,6 +276,13 @@
VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \
} \
\
@@ -12248,12 +6245,12 @@ index aa70cbd..1261fef 100644
.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_builtin_fw) = .; \
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
-index 206dcc3..660dbfc 100644
+index ac4888d..d68268d 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
-@@ -289,17 +289,19 @@ bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run,
- #define irqchip_in_kernel(k) (!!((k)->arch.vgic.in_kernel))
- #define vgic_initialized(k) ((k)->arch.vgic.ready)
+@@ -290,17 +290,19 @@ bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ #define vgic_initialized(k) (!!((k)->arch.vgic.nr_cpus))
+ #define vgic_ready(k) ((k)->arch.vgic.ready)
-int vgic_v2_probe(struct device_node *vgic_node,
- const struct vgic_ops **ops,
@@ -12281,18 +6278,10 @@ index 206dcc3..660dbfc 100644
return -ENODEV;
}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
-index 407a12f..de81de3 100644
+index 856d381..13e6200 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
-@@ -28,6 +28,7 @@
- #include <linux/errno.h>
- #include <linux/ioport.h> /* for struct resource */
- #include <linux/device.h>
-+#include <linux/property.h>
-
- #ifndef _LINUX
- #define _LINUX
-@@ -71,6 +72,7 @@ enum acpi_irq_model_id {
+@@ -72,6 +72,7 @@ enum acpi_irq_model_id {
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
ACPI_IRQ_MODEL_PLATFORM,
@@ -12300,171 +6289,6 @@ index 407a12f..de81de3 100644
ACPI_IRQ_MODEL_COUNT
};
-@@ -123,6 +125,10 @@ int acpi_numa_init (void);
-
- int acpi_table_init (void);
- int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
-+int __init acpi_parse_entries(unsigned long table_size,
-+ acpi_tbl_entry_handler handler,
-+ struct acpi_table_header *table_header,
-+ int entry_id, unsigned int max_entries);
- int __init acpi_table_parse_entries(char *id, unsigned long table_size,
- int entry_id,
- acpi_tbl_entry_handler handler,
-@@ -423,12 +429,8 @@ extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
- const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
- const struct device *dev);
-
--static inline bool acpi_driver_match_device(struct device *dev,
-- const struct device_driver *drv)
--{
-- return !!acpi_match_device(drv->acpi_match_table, dev);
--}
--
-+extern bool acpi_driver_match_device(struct device *dev,
-+ const struct device_driver *drv);
- int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *);
- int acpi_device_modalias(struct device *, char *, int);
-
-@@ -443,6 +445,23 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
- #define ACPI_COMPANION_SET(dev, adev) do { } while (0)
- #define ACPI_HANDLE(dev) (NULL)
-
-+struct fwnode_handle;
-+
-+static inline bool is_acpi_node(struct fwnode_handle *fwnode)
-+{
-+ return false;
-+}
-+
-+static inline struct acpi_device *acpi_node(struct fwnode_handle *fwnode)
-+{
-+ return NULL;
-+}
-+
-+static inline struct fwnode_handle *acpi_fwnode_handle(struct acpi_device *adev)
-+{
-+ return NULL;
-+}
-+
- static inline const char *acpi_dev_name(struct acpi_device *adev)
- {
- return NULL;
-@@ -659,4 +678,114 @@ do { \
- #endif
- #endif
-
-+struct acpi_gpio_params {
-+ unsigned int crs_entry_index;
-+ unsigned int line_index;
-+ bool active_low;
-+};
-+
-+struct acpi_gpio_mapping {
-+ const char *name;
-+ const struct acpi_gpio_params *data;
-+ unsigned int size;
-+};
-+
-+#if defined(CONFIG_ACPI) && defined(CONFIG_GPIOLIB)
-+int acpi_dev_add_driver_gpios(struct acpi_device *adev,
-+ const struct acpi_gpio_mapping *gpios);
-+
-+static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
-+{
-+ if (adev)
-+ adev->driver_gpios = NULL;
-+}
-+#else
-+static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
-+ const struct acpi_gpio_mapping *gpios)
-+{
-+ return -ENXIO;
-+}
-+static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {}
-+#endif
-+
-+/* Device properties */
-+
-+#define MAX_ACPI_REFERENCE_ARGS 8
-+struct acpi_reference_args {
-+ struct acpi_device *adev;
-+ size_t nargs;
-+ u64 args[MAX_ACPI_REFERENCE_ARGS];
-+};
-+
-+#ifdef CONFIG_ACPI
-+int acpi_dev_get_property(struct acpi_device *adev, const char *name,
-+ acpi_object_type type, const union acpi_object **obj);
-+int acpi_dev_get_property_array(struct acpi_device *adev, const char *name,
-+ acpi_object_type type,
-+ const union acpi_object **obj);
-+int acpi_dev_get_property_reference(struct acpi_device *adev,
-+ const char *name, size_t index,
-+ struct acpi_reference_args *args);
-+
-+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
-+ void **valptr);
-+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
-+ enum dev_prop_type proptype, void *val);
-+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
-+ enum dev_prop_type proptype, void *val, size_t nval);
-+
-+struct acpi_device *acpi_get_next_child(struct device *dev,
-+ struct acpi_device *child);
-+#else
-+static inline int acpi_dev_get_property(struct acpi_device *adev,
-+ const char *name, acpi_object_type type,
-+ const union acpi_object **obj)
-+{
-+ return -ENXIO;
-+}
-+static inline int acpi_dev_get_property_array(struct acpi_device *adev,
-+ const char *name,
-+ acpi_object_type type,
-+ const union acpi_object **obj)
-+{
-+ return -ENXIO;
-+}
-+static inline int acpi_dev_get_property_reference(struct acpi_device *adev,
-+ const char *name, const char *cells_name,
-+ size_t index, struct acpi_reference_args *args)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int acpi_dev_prop_get(struct acpi_device *adev,
-+ const char *propname,
-+ void **valptr)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int acpi_dev_prop_read_single(struct acpi_device *adev,
-+ const char *propname,
-+ enum dev_prop_type proptype,
-+ void *val)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline int acpi_dev_prop_read(struct acpi_device *adev,
-+ const char *propname,
-+ enum dev_prop_type proptype,
-+ void *val, size_t nval)
-+{
-+ return -ENXIO;
-+}
-+
-+static inline struct acpi_device *acpi_get_next_child(struct device *dev,
-+ struct acpi_device *child)
-+{
-+ return NULL;
-+}
-+
-+#endif
-+
- #endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index abcafaa..4f5caa1 100644
--- a/include/linux/clocksource.h
@@ -12480,76 +6304,6 @@ index abcafaa..4f5caa1 100644
+#endif
+
#endif /* _LINUX_CLOCKSOURCE_H */
-diff --git a/include/linux/efi.h b/include/linux/efi.h
-index 0949f9c..0238d61 100644
---- a/include/linux/efi.h
-+++ b/include/linux/efi.h
-@@ -547,6 +547,9 @@ void efi_native_runtime_setup(void);
- #define SMBIOS_TABLE_GUID \
- EFI_GUID( 0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-+#define SMBIOS3_TABLE_GUID \
-+ EFI_GUID( 0xf2fd1544, 0x9794, 0x4a2c, 0x99, 0x2e, 0xe5, 0xbb, 0xcf, 0x20, 0xe3, 0x94 )
-+
- #define SAL_SYSTEM_TABLE_GUID \
- EFI_GUID( 0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-@@ -810,7 +813,8 @@ extern struct efi {
- unsigned long mps; /* MPS table */
- unsigned long acpi; /* ACPI table (IA64 ext 0.71) */
- unsigned long acpi20; /* ACPI table (ACPI 2.0) */
-- unsigned long smbios; /* SM BIOS table */
-+ unsigned long smbios; /* SMBIOS table (32 bit entry point) */
-+ unsigned long smbios3; /* SMBIOS table (64 bit entry point) */
- unsigned long sal_systab; /* SAL system table */
- unsigned long boot_info; /* boot info table */
- unsigned long hcdp; /* HCDP table */
-diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
-index 12f146f..00b1b70 100644
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -94,6 +94,13 @@ int gpiod_to_irq(const struct gpio_desc *desc);
- struct gpio_desc *gpio_to_desc(unsigned gpio);
- int desc_to_gpio(const struct gpio_desc *desc);
-
-+/* Child properties interface */
-+struct fwnode_handle;
-+
-+struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
-+ const char *propname);
-+struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
-+ struct fwnode_handle *child);
- #else /* CONFIG_GPIOLIB */
-
- static inline struct gpio_desc *__must_check __gpiod_get(struct device *dev,
-diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
-index 8b62246..ee2d8c6 100644
---- a/include/linux/gpio_keys.h
-+++ b/include/linux/gpio_keys.h
-@@ -2,6 +2,7 @@
- #define _GPIO_KEYS_H
-
- struct device;
-+struct gpio_desc;
-
- /**
- * struct gpio_keys_button - configuration parameters
-@@ -17,6 +18,7 @@ struct device;
- * disable button via sysfs
- * @value: axis value for %EV_ABS
- * @irq: Irq number in case of interrupt keys
-+ * @gpiod: GPIO descriptor
- */
- struct gpio_keys_button {
- unsigned int code;
-@@ -29,6 +31,7 @@ struct gpio_keys_button {
- bool can_disable;
- int value;
- unsigned int irq;
-+ struct gpio_desc *gpiod;
- };
-
- /**
diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h
new file mode 100644
index 0000000..ad5b577
@@ -12588,7 +6342,7 @@ index 0000000..ad5b577
+
+#endif /* ARM_GIC_ACPI_H_ */
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
-index 13eed92..dc9cb5f 100644
+index 71d706d..5c55f37 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -55,6 +55,8 @@
@@ -12600,131 +6354,11 @@ index 13eed92..dc9cb5f 100644
#define GICH_HCR 0x0
#define GICH_VTR 0x4
#define GICH_VMCR 0x8
-diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
-index a6059bd..e4d8f70 100644
---- a/include/linux/kvm_host.h
-+++ b/include/linux/kvm_host.h
-@@ -43,6 +43,7 @@
- * include/linux/kvm_h.
- */
- #define KVM_MEMSLOT_INVALID (1UL << 16)
-+#define KVM_MEMSLOT_INCOHERENT (1UL << 17)
-
- /* Two fragments for cross MMIO pages. */
- #define KVM_MAX_MMIO_FRAGMENTS 2
-diff --git a/include/linux/leds.h b/include/linux/leds.h
-index a57611d..361101f 100644
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -261,6 +261,7 @@ struct gpio_led {
- unsigned retain_state_suspended : 1;
- unsigned default_state : 2;
- /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
-+ struct gpio_desc *gpiod;
- };
- #define LEDS_GPIO_DEFSTATE_OFF 0
- #define LEDS_GPIO_DEFSTATE_ON 1
-@@ -273,7 +274,7 @@ struct gpio_led_platform_data {
- #define GPIO_LED_NO_BLINK_LOW 0 /* No blink GPIO state low */
- #define GPIO_LED_NO_BLINK_HIGH 1 /* No blink GPIO state high */
- #define GPIO_LED_BLINK 2 /* Please, blink */
-- int (*gpio_blink_set)(unsigned gpio, int state,
-+ int (*gpio_blink_set)(struct gpio_desc *desc, int state,
- unsigned long *delay_on,
- unsigned long *delay_off);
- };
-diff --git a/include/linux/of.h b/include/linux/of.h
-index 29f0adc..cf79be1 100644
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -23,6 +23,7 @@
- #include <linux/spinlock.h>
- #include <linux/topology.h>
- #include <linux/notifier.h>
-+#include <linux/property.h>
-
- #include <asm/byteorder.h>
- #include <asm/errno.h>
-@@ -49,6 +50,7 @@ struct device_node {
- const char *type;
- phandle phandle;
- const char *full_name;
-+ struct fwnode_handle fwnode;
-
- struct property *properties;
- struct property *deadprops; /* removed properties */
-@@ -79,6 +81,7 @@ extern struct kobj_type of_node_ktype;
- static inline void of_node_init(struct device_node *node)
- {
- kobject_init(&node->kobj, &of_node_ktype);
-+ node->fwnode.type = FWNODE_OF;
- }
-
- /* true when node is initialized */
-@@ -114,6 +117,16 @@ extern struct device_node *of_aliases;
- extern struct device_node *of_stdout;
- extern raw_spinlock_t devtree_lock;
-
-+static inline bool is_of_node(struct fwnode_handle *fwnode)
-+{
-+ return fwnode && fwnode->type == FWNODE_OF;
-+}
-+
-+static inline struct device_node *of_node(struct fwnode_handle *fwnode)
-+{
-+ return fwnode ? container_of(fwnode, struct device_node, fwnode) : NULL;
-+}
-+
- static inline bool of_have_populated_dt(void)
- {
- return of_allnodes != NULL;
-@@ -263,6 +276,10 @@ extern int of_property_read_u32_array(const struct device_node *np,
- size_t sz);
- extern int of_property_read_u64(const struct device_node *np,
- const char *propname, u64 *out_value);
-+extern int of_property_read_u64_array(const struct device_node *np,
-+ const char *propname,
-+ u64 *out_values,
-+ size_t sz);
-
- extern int of_property_read_string(struct device_node *np,
- const char *propname,
-@@ -355,6 +372,16 @@ bool of_console_check(struct device_node *dn, char *name, int index);
-
- #else /* CONFIG_OF */
-
-+static inline bool is_of_node(struct fwnode_handle *fwnode)
-+{
-+ return false;
-+}
-+
-+static inline struct device_node *of_node(struct fwnode_handle *fwnode)
-+{
-+ return NULL;
-+}
-+
- static inline const char* of_node_full_name(const struct device_node *np)
- {
- return "<no-node>";
-@@ -477,6 +504,13 @@ static inline int of_property_read_u32_array(const struct device_node *np,
- return -ENOSYS;
- }
-
-+static inline int of_property_read_u64_array(const struct device_node *np,
-+ const char *propname,
-+ u64 *out_values, size_t sz)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int of_property_read_string(struct device_node *np,
- const char *propname,
- const char **out_string)
diff --git a/include/linux/pci.h b/include/linux/pci.h
-index 4c8ac5f..ea663d8 100644
+index 360a966..1476a66 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
-@@ -563,15 +563,6 @@ struct pci_ops {
+@@ -564,15 +564,6 @@ struct pci_ops {
int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
};
@@ -12740,7 +6374,7 @@ index 4c8ac5f..ea663d8 100644
struct pci_bus_region {
dma_addr_t start;
dma_addr_t end;
-@@ -1326,6 +1317,16 @@ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
+@@ -1329,6 +1320,16 @@ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
unsigned int command_bits, u32 flags);
void pci_register_set_vga_state(arch_set_vga_state_t func);
@@ -12757,7 +6391,7 @@ index 4c8ac5f..ea663d8 100644
#else /* CONFIG_PCI is not enabled */
/*
-@@ -1427,6 +1428,23 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
+@@ -1430,6 +1431,23 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
unsigned int devfn)
{ return NULL; }
@@ -12781,7 +6415,7 @@ index 4c8ac5f..ea663d8 100644
static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) { return NULL; }
static inline int pci_get_new_domain_nr(void) { return -ENOSYS; }
-@@ -1636,7 +1654,6 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+@@ -1639,7 +1657,6 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev,
enum pcie_reset_state state);
int pcibios_add_device(struct pci_dev *dev);
void pcibios_release_device(struct pci_dev *dev);
@@ -12789,214 +6423,8 @@ index 4c8ac5f..ea663d8 100644
#ifdef CONFIG_HIBERNATE_CALLBACKS
extern struct dev_pm_ops pcibios_pm_ops;
-diff --git a/include/linux/property.h b/include/linux/property.h
-new file mode 100644
-index 0000000..a6a3d98
---- /dev/null
-+++ b/include/linux/property.h
-@@ -0,0 +1,143 @@
-+/*
-+ * property.h - Unified device property interface.
-+ *
-+ * Copyright (C) 2014, Intel Corporation
-+ * Authors: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
-+ * Mika Westerberg <mika.westerberg at linux.intel.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _LINUX_PROPERTY_H_
-+#define _LINUX_PROPERTY_H_
-+
-+#include <linux/types.h>
-+
-+struct device;
-+
-+enum dev_prop_type {
-+ DEV_PROP_U8,
-+ DEV_PROP_U16,
-+ DEV_PROP_U32,
-+ DEV_PROP_U64,
-+ DEV_PROP_STRING,
-+ DEV_PROP_MAX,
-+};
-+
-+bool device_property_present(struct device *dev, const char *propname);
-+int device_property_read_u8_array(struct device *dev, const char *propname,
-+ u8 *val, size_t nval);
-+int device_property_read_u16_array(struct device *dev, const char *propname,
-+ u16 *val, size_t nval);
-+int device_property_read_u32_array(struct device *dev, const char *propname,
-+ u32 *val, size_t nval);
-+int device_property_read_u64_array(struct device *dev, const char *propname,
-+ u64 *val, size_t nval);
-+int device_property_read_string_array(struct device *dev, const char *propname,
-+ const char **val, size_t nval);
-+int device_property_read_string(struct device *dev, const char *propname,
-+ const char **val);
-+
-+enum fwnode_type {
-+ FWNODE_INVALID = 0,
-+ FWNODE_OF,
-+ FWNODE_ACPI,
-+};
-+
-+struct fwnode_handle {
-+ enum fwnode_type type;
-+};
-+
-+bool fwnode_property_present(struct fwnode_handle *fwnode, const char *propname);
-+int fwnode_property_read_u8_array(struct fwnode_handle *fwnode,
-+ const char *propname, u8 *val,
-+ size_t nval);
-+int fwnode_property_read_u16_array(struct fwnode_handle *fwnode,
-+ const char *propname, u16 *val,
-+ size_t nval);
-+int fwnode_property_read_u32_array(struct fwnode_handle *fwnode,
-+ const char *propname, u32 *val,
-+ size_t nval);
-+int fwnode_property_read_u64_array(struct fwnode_handle *fwnode,
-+ const char *propname, u64 *val,
-+ size_t nval);
-+int fwnode_property_read_string_array(struct fwnode_handle *fwnode,
-+ const char *propname, const char **val,
-+ size_t nval);
-+int fwnode_property_read_string(struct fwnode_handle *fwnode,
-+ const char *propname, const char **val);
-+
-+struct fwnode_handle *device_get_next_child_node(struct device *dev,
-+ struct fwnode_handle *child);
-+
-+#define device_for_each_child_node(dev, child) \
-+ for (child = device_get_next_child_node(dev, NULL); child; \
-+ child = device_get_next_child_node(dev, child))
-+
-+void fwnode_handle_put(struct fwnode_handle *fwnode);
-+
-+unsigned int device_get_child_node_count(struct device *dev);
-+
-+static inline bool device_property_read_bool(struct device *dev,
-+ const char *propname)
-+{
-+ return device_property_present(dev, propname);
-+}
-+
-+static inline int device_property_read_u8(struct device *dev,
-+ const char *propname, u8 *val)
-+{
-+ return device_property_read_u8_array(dev, propname, val, 1);
-+}
-+
-+static inline int device_property_read_u16(struct device *dev,
-+ const char *propname, u16 *val)
-+{
-+ return device_property_read_u16_array(dev, propname, val, 1);
-+}
-+
-+static inline int device_property_read_u32(struct device *dev,
-+ const char *propname, u32 *val)
-+{
-+ return device_property_read_u32_array(dev, propname, val, 1);
-+}
-+
-+static inline int device_property_read_u64(struct device *dev,
-+ const char *propname, u64 *val)
-+{
-+ return device_property_read_u64_array(dev, propname, val, 1);
-+}
-+
-+static inline bool fwnode_property_read_bool(struct fwnode_handle *fwnode,
-+ const char *propname)
-+{
-+ return fwnode_property_present(fwnode, propname);
-+}
-+
-+static inline int fwnode_property_read_u8(struct fwnode_handle *fwnode,
-+ const char *propname, u8 *val)
-+{
-+ return fwnode_property_read_u8_array(fwnode, propname, val, 1);
-+}
-+
-+static inline int fwnode_property_read_u16(struct fwnode_handle *fwnode,
-+ const char *propname, u16 *val)
-+{
-+ return fwnode_property_read_u16_array(fwnode, propname, val, 1);
-+}
-+
-+static inline int fwnode_property_read_u32(struct fwnode_handle *fwnode,
-+ const char *propname, u32 *val)
-+{
-+ return fwnode_property_read_u32_array(fwnode, propname, val, 1);
-+}
-+
-+static inline int fwnode_property_read_u64(struct fwnode_handle *fwnode,
-+ const char *propname, u64 *val)
-+{
-+ return fwnode_property_read_u64_array(fwnode, propname, val, 1);
-+}
-+
-+#endif /* _LINUX_PROPERTY_H_ */
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index 0f62326..2a47179 100644
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -63,6 +63,15 @@ static const struct rfkill_ops rfkill_gpio_ops = {
- .set_block = rfkill_gpio_set_power,
- };
-
-+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
-+static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
-+
-+static const struct acpi_gpio_mapping acpi_rfkill_default_gpios[] = {
-+ { "reset-gpios", &reset_gpios, 1 },
-+ { "shutdown-gpios", &shutdown_gpios, 1 },
-+ { },
-+};
-+
- static int rfkill_gpio_acpi_probe(struct device *dev,
- struct rfkill_gpio_data *rfkill)
- {
-@@ -75,7 +84,8 @@ static int rfkill_gpio_acpi_probe(struct device *dev,
- rfkill->name = dev_name(dev);
- rfkill->type = (unsigned)id->driver_data;
-
-- return 0;
-+ return acpi_dev_add_driver_gpios(ACPI_COMPANION(dev),
-+ acpi_rfkill_default_gpios);
- }
-
- static int rfkill_gpio_probe(struct platform_device *pdev)
-@@ -102,7 +112,7 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
-
- rfkill->clk = devm_clk_get(&pdev->dev, NULL);
-
-- gpio = devm_gpiod_get_index(&pdev->dev, "reset", 0);
-+ gpio = devm_gpiod_get(&pdev->dev, "reset");
- if (!IS_ERR(gpio)) {
- ret = gpiod_direction_output(gpio, 0);
- if (ret)
-@@ -110,7 +120,7 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
- rfkill->reset_gpio = gpio;
- }
-
-- gpio = devm_gpiod_get_index(&pdev->dev, "shutdown", 1);
-+ gpio = devm_gpiod_get(&pdev->dev, "shutdown");
- if (!IS_ERR(gpio)) {
- ret = gpiod_direction_output(gpio, 0);
- if (ret)
-@@ -150,6 +160,8 @@ static int rfkill_gpio_remove(struct platform_device *pdev)
- rfkill_unregister(rfkill->rfkill_dev);
- rfkill_destroy(rfkill->rfkill_dev);
-
-+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
-+
- return 0;
- }
-
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
-index 22fa819..642dad4 100644
+index 1c0772b..b9d11aa 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -21,9 +21,11 @@
@@ -13011,7 +6439,7 @@ index 22fa819..642dad4 100644
#include <kvm/arm_vgic.h>
#include <kvm/arm_arch_timer.h>
-@@ -244,60 +246,91 @@ static const struct of_device_id arch_timer_of_match[] = {
+@@ -246,60 +248,91 @@ static const struct of_device_id arch_timer_of_match[] = {
{},
};
@@ -13301,7 +6729,7 @@ index 1c2c8ee..8b56920 100644
int ret = 0;
u32 gicv_idx;
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
-index aacdb59..d972d63 100644
+index 03affc7..cdd4c64 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -25,9 +25,11 @@
@@ -13316,7 +6744,7 @@ index aacdb59..d972d63 100644
#include <asm/kvm_emulate.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
-@@ -2427,8 +2429,8 @@ static struct notifier_block vgic_cpu_nb = {
+@@ -2431,8 +2433,8 @@ static struct notifier_block vgic_cpu_nb = {
};
static const struct of_device_id vgic_ids[] = {
@@ -13327,7 +6755,7 @@ index aacdb59..d972d63 100644
{},
};
-@@ -2438,20 +2440,26 @@ int kvm_vgic_hyp_init(void)
+@@ -2442,20 +2444,26 @@ int kvm_vgic_hyp_init(void)
const int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
const struct vgic_params **);
struct device_node *vgic_node;
diff --git a/kernel.spec b/kernel.spec
index ccf51ad..41b6c42 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -48,13 +48,13 @@ Summary: The Linux kernel
# base_sublevel is the kernel version we're starting with and patching
# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
# which yields a base_sublevel of 0.
-%define base_sublevel 18
+%define base_sublevel 19
## If this is a released kernel ##
%if 0%{?released_kernel}
# Do we have a -stable update to apply?
-%define stable_update 9
+%define stable_update 1
# Set rpm version accordingly
%if 0%{?stable_update}
%define stablerev %{stable_update}
@@ -386,6 +386,9 @@ BuildRequires: sparse
%if %{with_perf}
BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison flex
BuildRequires: audit-libs-devel
+%ifnarch s390 s390x %{arm}
+BuildRequires: numactl-devel
+%endif
%endif
%if %{with_tools}
BuildRequires: pciutils-devel gettext ncurses-devel
@@ -553,8 +556,8 @@ Patch1019: Add-sysrq-option-to-disable-secure-boot-mode.patch
# nouveau + drm fixes
# intel drm is all merged upstream
-Patch1826: drm-i915-tame-the-chattermouth-v2.patch
-Patch1827: drm-i915-Disable-verbose-state-checks.patch
+Patch1825: drm-i915-tame-the-chattermouth-v2.patch
+Patch1826: drm-i915-hush-check-crtc-state.patch
# Quiet boot fixes
@@ -585,7 +588,6 @@ Patch21025: arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch
Patch21026: pinctrl-pinctrl-single-must-be-initialized-early.patch
Patch21028: arm-i.MX6-Utilite-device-dtb.patch
-Patch21029: arm-dts-sun7i-bananapi.patch
Patch21100: arm-highbank-l2-reverts.patch
@@ -600,33 +602,14 @@ Patch21247: ath9k-rx-dma-stop-check.patch
Patch22000: weird-root-dentry-name-debug.patch
-# Patch series from Hans for various backlight and platform driver fixes
-Patch26002: samsung-laptop-Add-broken-acpi-video-quirk-for-NC210.patch
-
-#rhbz 1089731
Patch26058: asus-nb-wmi-Add-wapf4-quirk-for-the-X550VB.patch
-#rhbz 1135338
-Patch26090: HID-add-support-for-MS-Surface-Pro-3-Type-Cover.patch
-
-#rhbz 1173806
-Patch26101: powerpc-powernv-force-all-CPUs-to-be-bootable.patch
-
-#rhbz 1163927
-Patch26121: Set-UID-in-sess_auth_rawntlmssp_authenticate-too.patch
+#rhbz 1111138
+Patch26059: i8042-Add-notimeout-quirk-for-Fujitsu-Lifebook-A544-.patch
-#rhbz 1124119
-Patch26126: uas-Do-not-blacklist-ASM1153-disk-enclosures.patch
-Patch26127: uas-Add-US_FL_NO_ATA_1X-for-2-more-Seagate-disk-encl.patch
-
-#rhbz 1163574
-Patch26130: acpi-video-Add-disable_native_backlight-quirk-for-De.patch
#rhbz 1094948
Patch26131: acpi-video-Add-disable_native_backlight-quirk-for-Sa.patch
-# Fix for big-endian arches, already upstream
-Patch26134: mpssd-x86-only.patch
-
#rhbz 1186097
Patch26135: acpi-video-add-disable_native_backlight_quirk_for_samsung_510r.patch
@@ -642,9 +625,6 @@ Patch26138: ext4-Allocate-entire-range-in-zero-range.patch
#rhbz 1190947
Patch26141: Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch
-#CVE-2015-2042 rhbz 1195355 1199365
-Patch26143: net-rds-use-correct-size-for-max-unacked-packets-and.patch
-
#rhbz 1200777 1200778
Patch26150: Input-synaptics-split-synaptics_resolution-query-fir.patch
Patch26151: Input-synaptics-log-queried-and-quirked-dimension-va.patch
@@ -673,10 +653,9 @@ Patch26167: IB-core-Prevent-integer-overflow-in-ib_umem_get-addr.patch
#rhbz 1201532
Patch26168: HID-multitouch-add-support-of-clickpads.patch
+
# git clone ssh://git.fedorahosted.org/git/kernel-arm64.git, git diff master...devel
Patch30000: kernel-arm64.patch
-Patch30001: arm64-revert-tlb-rcu_table_free.patch
-Patch30002: arm64-fix-ooo-descriptor-read.patch
# END OF PATCH DEFINITIONS
@@ -1264,7 +1243,6 @@ ApplyPatch arm-dts-am335x-bone-common-add-uart2_pins-uart4_pins.patch
ApplyPatch pinctrl-pinctrl-single-must-be-initialized-early.patch
ApplyPatch arm-i.MX6-Utilite-device-dtb.patch
-ApplyPatch arm-dts-sun7i-bananapi.patch
ApplyPatch arm-highbank-l2-reverts.patch
@@ -1360,7 +1338,7 @@ ApplyPatch Add-sysrq-option-to-disable-secure-boot-mode.patch
# Intel DRM
ApplyPatch drm-i915-tame-the-chattermouth-v2.patch
-ApplyPatch drm-i915-Disable-verbose-state-checks.patch
+ApplyPatch drm-i915-hush-check-crtc-state.patch
# Radeon DRM
@@ -1386,33 +1364,14 @@ ApplyPatch criu-no-expert.patch
#rhbz 892811
ApplyPatch ath9k-rx-dma-stop-check.patch
-# Patch series from Hans for various backlight and platform driver fixes
-ApplyPatch samsung-laptop-Add-broken-acpi-video-quirk-for-NC210.patch
-
-#rhbz 1089731
ApplyPatch asus-nb-wmi-Add-wapf4-quirk-for-the-X550VB.patch
-#rhbz 1135338
-ApplyPatch HID-add-support-for-MS-Surface-Pro-3-Type-Cover.patch
-
-#rhbz 1173806
-ApplyPatch powerpc-powernv-force-all-CPUs-to-be-bootable.patch
-
-#rhbz 1163927
-ApplyPatch Set-UID-in-sess_auth_rawntlmssp_authenticate-too.patch
-
-#rhbz 1124119
-ApplyPatch uas-Do-not-blacklist-ASM1153-disk-enclosures.patch
-ApplyPatch uas-Add-US_FL_NO_ATA_1X-for-2-more-Seagate-disk-encl.patch
+#rhbz 1111138
+ApplyPatch i8042-Add-notimeout-quirk-for-Fujitsu-Lifebook-A544-.patch
-#rhbz 1163574
-ApplyPatch acpi-video-Add-disable_native_backlight-quirk-for-De.patch
#rhbz 1094948
ApplyPatch acpi-video-Add-disable_native_backlight-quirk-for-Sa.patch
-# Fix for big-endian arches, already upstream
-ApplyPatch mpssd-x86-only.patch
-
#rhbz 1186097
ApplyPatch acpi-video-add-disable_native_backlight_quirk_for_samsung_510r.patch
@@ -1428,9 +1387,6 @@ ApplyPatch Bluetooth-ath3k-Add-support-Atheros-AR5B195-combo-Mi.patch
#rhbz 1185519
ApplyPatch NFS-fix-clp-cl_revoked-list-deletion-causing-softloc.patch
-#CVE-2015-2042 rhbz 1195355 1199365
-ApplyPatch net-rds-use-correct-size-for-max-unacked-packets-and.patch
-
#rhbz 1200777 1200778
ApplyPatch Input-synaptics-split-synaptics_resolution-query-fir.patch
ApplyPatch Input-synaptics-log-queried-and-quirked-dimension-va.patch
@@ -1461,11 +1417,8 @@ ApplyPatch HID-multitouch-add-support-of-clickpads.patch
%if 0%{?aarch64patches}
ApplyPatch kernel-arm64.patch
-ApplyPatch arm64-revert-tlb-rcu_table_free.patch
-ApplyPatch arm64-fix-ooo-descriptor-read.patch
%ifnarch aarch64 # this is stupid, but i want to notice before secondary koji does.
ApplyPatch kernel-arm64.patch -R
-ApplyPatch arm64-revert-tlb-rcu_table_free.patch -R
%endif
%endif
@@ -2330,6 +2283,9 @@ fi
# ||----w |
# || ||
%changelog
+* Mon Mar 16 2015 Justin M. Forbes <jforbes at fedoraproject.org> - 3.19.1-200
+- Linux v3.19.1
+
* Fri Mar 13 2015 Kyle McMartin <kyle at fedoraproject.org>
- arm64-revert-tlb-rcu_table_free.patch: revert 5e5f6dc1 which causes
lockups on arm64 machines.
diff --git a/nfs-don-t-call-blocking-operations-while-TASK_RUNNIN.patch b/nfs-don-t-call-blocking-operations-while-TASK_RUNNIN.patch
new file mode 100644
index 0000000..34a60b2
--- /dev/null
+++ b/nfs-don-t-call-blocking-operations-while-TASK_RUNNIN.patch
@@ -0,0 +1,91 @@
+From: Jeff Layton <jlayton at primarydata.com>
+Date: Wed, 14 Jan 2015 13:08:57 -0500
+Subject: [PATCH] nfs: don't call blocking operations while !TASK_RUNNING
+
+Bruce reported seeing this warning pop when mounting using v4.1:
+
+ ------------[ cut here ]------------
+ WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0()
+ do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90
+ Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi
+ CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25
+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014
+ 0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78
+ 0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da
+ ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000
+ Call Trace:
+ [<ffffffff8186ac78>] dump_stack+0x4c/0x65
+ [<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0
+ [<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70
+ [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
+ [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
+ [<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0
+ [<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430
+ [<ffffffff810d941e>] ? groups_alloc+0x3e/0x130
+ [<ffffffff810d941e>] groups_alloc+0x3e/0x130
+ [<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc]
+ [<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc]
+ [<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc]
+ [<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc]
+ [<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4]
+ [<ffffffff810ff970>] ? wait_woken+0xc0/0xc0
+ [<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4]
+ [<ffffffff810d45bf>] kthread+0x11f/0x140
+ [<ffffffff810ea815>] ? local_clock+0x15/0x30
+ [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
+ [<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0
+ [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
+ ---[ end trace 675220a11e30f4f2 ]---
+
+nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE,
+which is just wrong. Fix that by finishing the wait immediately if we've
+found that the list has something on it.
+
+Also, we don't expect this kthread to accept signals, so we should be
+using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up
+hung task warnings from the watchdog, so have the schedule_timeout
+wake up every 60s if there's no callback activity.
+
+Reported-by: "J. Bruce Fields" <bfields at fieldses.org>
+Signed-off-by: Jeff Layton <jlayton at primarydata.com>
+Cc: stable at vger.kernel.org
+Signed-off-by: Trond Myklebust <trond.myklebust at primarydata.com>
+---
+ fs/nfs/callback.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
+index b8fb3a4ef649..351be9205bf8 100644
+--- a/fs/nfs/callback.c
++++ b/fs/nfs/callback.c
+@@ -128,22 +128,24 @@ nfs41_callback_svc(void *vrqstp)
+ if (try_to_freeze())
+ continue;
+
+- prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_INTERRUPTIBLE);
++ prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_UNINTERRUPTIBLE);
+ spin_lock_bh(&serv->sv_cb_lock);
+ if (!list_empty(&serv->sv_cb_list)) {
+ req = list_first_entry(&serv->sv_cb_list,
+ struct rpc_rqst, rq_bc_list);
+ list_del(&req->rq_bc_list);
+ spin_unlock_bh(&serv->sv_cb_lock);
++ finish_wait(&serv->sv_cb_waitq, &wq);
+ dprintk("Invoking bc_svc_process()\n");
+ error = bc_svc_process(serv, req, rqstp);
+ dprintk("bc_svc_process() returned w/ error code= %d\n",
+ error);
+ } else {
+ spin_unlock_bh(&serv->sv_cb_lock);
+- schedule();
++ /* schedule_timeout to game the hung task watchdog */
++ schedule_timeout(60 * HZ);
++ finish_wait(&serv->sv_cb_waitq, &wq);
+ }
+- finish_wait(&serv->sv_cb_waitq, &wq);
+ }
+ return 0;
+ }
+--
+2.1.0
+
diff --git a/silence-fbcon-logo.patch b/silence-fbcon-logo.patch
index 654927e..baeb94e 100644
--- a/silence-fbcon-logo.patch
+++ b/silence-fbcon-logo.patch
@@ -9,7 +9,7 @@ Upstream-status: Fedora mustard
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
-index eb976ee3a02f..275f20a643f4 100644
+index ea437245562e..eefa9c45d2e1 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -637,13 +637,15 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
@@ -47,7 +47,7 @@ index eb976ee3a02f..275f20a643f4 100644
+
+early_param("quiet", quiet_logo);
+
- module_init(fb_console_init);
+ fs_initcall(fb_console_init);
#ifdef MODULE
--
diff --git a/sources b/sources
index 94123c7..e2bd94e 100644
--- a/sources
+++ b/sources
@@ -1,3 +1,3 @@
-9e854df51ca3fef8bfe566dbd7b89241 linux-3.18.tar.xz
-813ccb96f0b379d656e57442c2587ca3 perf-man-3.18.tar.gz
-41077062d4b7beefd88d4df6e598e376 patch-3.18.9.xz
+d3fc8316d4d4d04b65cbc2d70799e763 linux-3.19.tar.xz
+15d8d2f97ce056488451a5bfb2944603 perf-man-3.19.tar.gz
+2f2822cf2d84a8ec3a8b044e732cf45b patch-3.19.1.xz
More information about the scm-commits
mailing list