fbl pushed to openvswitch (f20). "updated to 2.1.0 (..more)"
notifications at fedoraproject.org
notifications at fedoraproject.org
Sat Mar 28 03:04:38 UTC 2015
>From 961b7257d739f0b7e0c7d9660811ac693b17cab1 Mon Sep 17 00:00:00 2001
From: Flavio Leitner <fbl at redhat.com>
Date: Tue, 25 Mar 2014 20:17:50 -0300
Subject: updated to 2.1.0
Resolves: #1080679
Signed-off-by: Flavio Leitner <fbl at redhat.com>
diff --git a/.gitignore b/.gitignore
index 768ed7b..5e26750 100644
--- a/.gitignore
+++ b/.gitignore
@@ -7,3 +7,4 @@
/openvswitch-1.11.0.tar.gz
/openvswitch-2.0.0.tar.gz
/openvswitch-2.0.1.tar.gz
+/openvswitch-2.1.0.tar.gz
diff --git a/openvswitch-bridge-don-t-bring-up-internal-ports-by-default.patch b/openvswitch-bridge-don-t-bring-up-internal-ports-by-default.patch
new file mode 100644
index 0000000..f72667d
--- /dev/null
+++ b/openvswitch-bridge-don-t-bring-up-internal-ports-by-default.patch
@@ -0,0 +1,130 @@
+From fab3da1fc7a88dfbe2275fa0eccb798444eae385 Mon Sep 17 00:00:00 2001
+From: Flavio Leitner <fbl at redhat.com>
+Date: Tue, 1 Apr 2014 18:05:20 -0300
+Subject: [PATCH] bridge: don't bring up internal ports by default.
+
+It should be an administrator task to bring up devices as they
+are configured properly.
+
+Currently, Fedora is deleting the bridges when the interface is
+brought down. Therefore, there is no bridge on the next boot and
+the initscripts can apply the networking configuration properly
+for a new bridge.
+
+However, if the system didn't execute ifdown for some reason, the
+bridge is left in the ovsdb and since internal ports are brought
+up by default, there is no way for initscripts to known if the
+adminitrator has already configured it or not.
+
+This patch reverts commit bef071a5fdf8e2dd87677b04b3cf7a8f5094edcb
+(bridge: Always "up" internal devices.).
+
+Signed-off-by: Flavio Leitner <fbl at redhat.com>
+Signed-off-by: Ben Pfaff <blp at nicira.com>
+---
+ NEWS | 5 +++++
+ tests/ofproto-dpif.at | 4 ++--
+ tests/ofproto.at | 16 ++++++++--------
+ vswitchd/bridge.c | 3 +--
+ 4 files changed, 16 insertions(+), 12 deletions(-)
+
+diff --git a/NEWS b/NEWS
+index 839b4dd..91d9194 100644
+--- a/NEWS
++++ b/NEWS
+@@ -1,3 +1,8 @@
++Backported from upstream:
++ - Internal ports are no longer brought up by default, because it
++ should be an administrator task to bring up devices as they are
++ configured properly.
++
+ v2.1.0 - 19 Mar 2014
+ ---------------------
+ - Address prefix tracking support for flow tables. New columns
+diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
+index 1a58da6..fbd40ff 100644
+--- a/tests/ofproto-dpif.at
++++ b/tests/ofproto-dpif.at
+@@ -1937,7 +1937,7 @@ IFCOUNTERS
+ type=6
+ ifspeed=100000000
+ direction=0
+- status=3
++ status=0
+ in_octets=0
+ in_unicasts=0
+ in_multicasts=0
+@@ -2006,7 +2006,7 @@ IFCOUNTERS
+ type=6
+ ifspeed=100000000
+ direction=0
+- status=3
++ status=0
+ in_octets=0
+ in_unicasts=0
+ in_multicasts=0
+diff --git a/tests/ofproto.at b/tests/ofproto.at
+index f6a62cd..dd56b39 100644
+--- a/tests/ofproto.at
++++ b/tests/ofproto.at
+@@ -38,8 +38,8 @@ n_tables:254, n_buffers:256
+ capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+ actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+- config: 0
+- state: 0
++ config: PORT_DOWN
++ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
+ ])
+@@ -68,8 +68,8 @@ actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_N
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ LOCAL(br0): addr:aa:55:aa:55:00:0x
+- config: 0
+- state: 0
++ config: PORT_DOWN
++ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
+ ])
+@@ -109,8 +109,8 @@ AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
+ AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+ OFPST_PORT_DESC reply:
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+- config: 0
+- state: 0
++ config: PORT_DOWN
++ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ ])
+ OVS_VSWITCHD_STOP
+@@ -124,8 +124,8 @@ AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports-desc br0], [0], [stdout])
+ AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+ OFPST_PORT_DESC reply (OF1.2):
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+- config: 0
+- state: 0
++ config: PORT_DOWN
++ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ ])
+ OVS_VSWITCHD_STOP
+diff --git a/vswitchd/bridge.c b/vswitchd/bridge.c
+index b72f0d8..5b81d62 100644
+--- a/vswitchd/bridge.c
++++ b/vswitchd/bridge.c
+@@ -1448,8 +1448,7 @@ iface_do_create(const struct bridge *br,
+ VLOG_INFO("bridge %s: added interface %s on port %d",
+ br->name, iface_cfg->name, *ofp_portp);
+
+- if ((port_cfg->vlan_mode && !strcmp(port_cfg->vlan_mode, "splinter"))
+- || iface_is_internal(iface_cfg, br->cfg)) {
++ if (port_cfg->vlan_mode && !strcmp(port_cfg->vlan_mode, "splinter")) {
+ netdev_turn_flags_on(netdev, NETDEV_UP, NULL);
+ }
+
+--
+1.8.5.3
+
diff --git a/openvswitch-initscripts-add-tunnel-support.patch b/openvswitch-initscripts-add-tunnel-support.patch
deleted file mode 100644
index 5bd9bc9..0000000
--- a/openvswitch-initscripts-add-tunnel-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-diff --git a/rhel/etc_sysconfig_network-scripts_ifdown-ovs b/rhel/etc_sysconfig_network-scripts_ifdown-ovs
-index 32fddb5..daa5786 100755
---- a/rhel/etc_sysconfig_network-scripts_ifdown-ovs
-+++ b/rhel/etc_sysconfig_network-scripts_ifdown-ovs
-@@ -51,7 +51,7 @@ case "$TYPE" in
- retval=$?
- ovs-vsctl -t ${TIMEOUT} -- --if-exists del-br "$DEVICE"
- ;;
-- OVSPort|OVSIntPort|OVSBond)
-+ OVSPort|OVSIntPort|OVSBond|OVSTunnel)
- ${OTHERSCRIPT} ${CONFIG} $2
- retval=$?
- ovs-vsctl -t ${TIMEOUT} -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE"
-diff --git a/rhel/etc_sysconfig_network-scripts_ifup-ovs b/rhel/etc_sysconfig_network-scripts_ifup-ovs
-index 3c6b557..3f31c30 100755
---- a/rhel/etc_sysconfig_network-scripts_ifup-ovs
-+++ b/rhel/etc_sysconfig_network-scripts_ifup-ovs
-@@ -126,6 +126,11 @@ case "$TYPE" in
- ${OTHERSCRIPT} ${CONFIG} ${2}
- OVSINTF=${DEVICE} /sbin/ifup "$OVS_BRIDGE"
- ;;
-+ OVSTunnel)
-+ ifup_ovs_bridge
-+ ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=$OVS_TUNNEL_TYPE $OVS_TUNNEL_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
-+ ${OTHERSCRIPT} ${CONFIG} ${2}
-+ ;;
- *)
- echo $"Invalid OVS interface type $TYPE"
- exit 1
diff --git a/openvswitch-ovs-lib-allow-non-root-users-to-check-service-status.patch b/openvswitch-ovs-lib-allow-non-root-users-to-check-service-status.patch
new file mode 100644
index 0000000..3b91229
--- /dev/null
+++ b/openvswitch-ovs-lib-allow-non-root-users-to-check-service-status.patch
@@ -0,0 +1,38 @@
+From 691e47554dd03dd6492e00bab5bd6d215f5cbd4f Mon Sep 17 00:00:00 2001
+From: Flavio Leitner <fbl at redhat.com>
+Date: Thu, 27 Feb 2014 09:16:34 -0300
+Subject: [PATCH] ovs-lib: allow non-root users to check service status
+
+It tries to log the status operation, so although non-root
+users can see the current status, the lack of permission
+to write to the log results in an error message.
+
+This changes to log only if the user has the permission to
+write to the log file.
+
+Signed-off-by: Flavio Leitner <fbl at redhat.com>
+Signed-off-by: Gurucharan Shetty <gshetty at nicira.com>
+---
+ utilities/ovs-lib.in | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/utilities/ovs-lib.in b/utilities/ovs-lib.in
+index 029ed3b..48d0c36 100644
+--- a/utilities/ovs-lib.in
++++ b/utilities/ovs-lib.in
+@@ -54,7 +54,11 @@ ovs_ctl () {
+ # of ovs-ctl. It is also useful to document the o/p in ovs-ctl.log.
+ display=`"${datadir}/scripts/ovs-ctl" "$@" 2>&1`
+ rc=$?
+- echo "${display}" | tee -a "${logdir}/ovs-ctl.log"
++ if test -w "${logdir}/ovs-ctl.log"; then
++ echo "${display}" | tee -a "${logdir}/ovs-ctl.log"
++ else
++ echo "${display}"
++ fi
+ return ${rc}
+ ;;
+ *)
+--
+1.8.5.3
+
diff --git a/openvswitch-rhel-Add-Patch-Port-support-to-initscripts.patch b/openvswitch-rhel-Add-Patch-Port-support-to-initscripts.patch
new file mode 100644
index 0000000..06c202f
--- /dev/null
+++ b/openvswitch-rhel-Add-Patch-Port-support-to-initscripts.patch
@@ -0,0 +1,114 @@
+From e2bcc8ef49f5e51f48983b87ab1010f0f9ab1454 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jason=20K=C3=B6lker?= <jason at koelker.net>
+Date: Mon, 31 Mar 2014 23:34:14 +0000
+Subject: [PATCH] rhel: Add Patch Port support to initscripts
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Allows setting up type=patch ports through sysconfig ifcfg-* files.
+
+Signed-off-by: Jason Kölker <jason at koelker.net>
+Signed-off-by: Gurucharan Shetty <gshetty at nicira.com>
+Acked-by: Flavio Leitner <fbl at redhat.com>
+---
+ AUTHORS | 1 +
+ rhel/README.RHEL | 25 +++++++++++++++++++++++++
+ rhel/etc_sysconfig_network-scripts_ifdown-ovs | 3 +++
+ rhel/etc_sysconfig_network-scripts_ifup-ovs | 4 ++++
+ 4 files changed, 33 insertions(+)
+
+diff --git a/AUTHORS b/AUTHORS
+index 977753b..c5402cf 100644
+--- a/AUTHORS
++++ b/AUTHORS
+@@ -57,6 +57,7 @@ Isaku Yamahata yamahata at valinux.co.jp
+ James P. roampune at gmail.com
+ James Page james.page at ubuntu.com
+ Jarno Rajahalme jrajahalme at nicira.com
++Jason Kölker jason at koelker.net
+ Jean Tourrilhes jt at hpl.hp.com
+ Jeremy Stribling strib at nicira.com
+ Jesse Gross jesse at nicira.com
+diff --git a/rhel/README.RHEL b/rhel/README.RHEL
+index cb6ab88..2620674 100644
+--- a/rhel/README.RHEL
++++ b/rhel/README.RHEL
+@@ -25,6 +25,8 @@ assignments. The following OVS-specific variable names are supported:
+
+ * "OVSTunnel", if <name> is an OVS tunnel.
+
++ * "OVSPatchPort", if <name> is a patch port
++
+ - OVS_BRIDGE: If TYPE is anything other than "OVSBridge", set to
+ the name of the OVS bridge to which the port should be attached.
+
+@@ -47,6 +49,9 @@ assignments. The following OVS-specific variable names are supported:
+ - OVS_TUNNEL_OPTIONS: For "OVSTunnel" interfaces, this field should be
+ used to specify the tunnel options like remote_ip, key, etc.
+
++ - OVS_PATCH_PEER: For "OVSPatchPort" devices, this field specifies
++ the patch's peer on the other bridge.
++
+ Note
+ ----
+
+@@ -182,6 +187,26 @@ OVS_BRIDGE=ovsbridge0
+ OVS_TUNNEL_TYPE=gre
+ OVS_TUNNEL_OPTIONS="options:remote_ip=A.B.C.D"
+
++
++Patch Ports:
++
++==> ifcfg-patch-ovs-0 <==
++DEVICE=patch-ovs-0
++ONBOOT=yes
++DEVICETYPE=ovs
++TYPE=OVSPatchPort
++OVS_BRIDGE=ovsbridge0
++OVS_PATCH_PEER=patch-ovs-1
++
++==> ifcfg-patch-ovs-1 <==
++DEVICE=patch-ovs-1
++ONBOOT=yes
++DEVICETYPE=ovs
++TYPE=OVSPatchPort
++OVS_BRIDGE=ovsbridge1
++OVS_PATCH_PEER=patch-ovs-0
++
++
+ Reporting Bugs
+ --------------
+
+diff --git a/rhel/etc_sysconfig_network-scripts_ifdown-ovs b/rhel/etc_sysconfig_network-scripts_ifdown-ovs
+index 8e768c8..1371a30 100755
+--- a/rhel/etc_sysconfig_network-scripts_ifdown-ovs
++++ b/rhel/etc_sysconfig_network-scripts_ifdown-ovs
+@@ -47,6 +47,9 @@ case "$TYPE" in
+ retval=$?
+ ovs-vsctl -t ${TIMEOUT} -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE"
+ ;;
++ OVSPatchPort)
++ ovs-vsctl -t ${TIMEOUT} -- --if-exists del-port "$OVS_BRIDGE" "$DEVICE"
++ ;;
+ *)
+ echo $"Invalid OVS interface type $TYPE"
+ exit 1
+diff --git a/rhel/etc_sysconfig_network-scripts_ifup-ovs b/rhel/etc_sysconfig_network-scripts_ifup-ovs
+index a50c72f..f5641d2 100755
+--- a/rhel/etc_sysconfig_network-scripts_ifup-ovs
++++ b/rhel/etc_sysconfig_network-scripts_ifup-ovs
+@@ -127,6 +127,10 @@ case "$TYPE" in
+ ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=$OVS_TUNNEL_TYPE $OVS_TUNNEL_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
+ ${OTHERSCRIPT} ${CONFIG} ${2}
+ ;;
++ OVSPatchPort)
++ ifup_ovs_bridge
++ ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=patch options:peer="${OVS_PATCH_PEER}" ${OVS_EXTRA+-- $OVS_EXTRA}
++ ;;
+ *)
+ echo $"Invalid OVS interface type $TYPE"
+ exit 1
+--
+1.8.5.3
+
diff --git a/openvswitch-util-use-gcc-builtins-to-better-check-array-sizes.patch b/openvswitch-util-use-gcc-builtins-to-better-check-array-sizes.patch
deleted file mode 100644
index ae9945c..0000000
--- a/openvswitch-util-use-gcc-builtins-to-better-check-array-sizes.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From b86fec9baa9c2ee03b28cfc8dad95c41bf9acaad Mon Sep 17 00:00:00 2001
-From: Flavio Leitner <fbl at redhat.com>
-Date: Wed, 2 Oct 2013 02:40:09 -0300
-Subject: [PATCH] util: use gcc builtins to better check array sizes
-
-GCC provides two useful builtin functions that can help
-to improve array size checking during compilation.
-
-This patch contains no functional changes, but it makes
-it easier to detect mistakes.
-
-Signed-off-by: Flavio Leitner <fbl at redhat.com>
-Signed-off-by: Ben Pfaff <blp at nicira.com>
----
- AUTHORS | 1 +
- lib/util.h | 17 ++++++++++++++++-
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
-diff --git a/AUTHORS b/AUTHORS
-index af34bfe..7a919a2 100644
---- a/AUTHORS
-+++ b/AUTHORS
-@@ -32,6 +32,7 @@ Duffie Cooley dcooley at nicira.com
- Ed Maste emaste at freebsd.org
- Edward Tomasz Napierała trasz at freebsd.org
- Ethan Jackson ethan at nicira.com
-+Flavio Leitner fbl at redhat.com
- FUJITA Tomonori fujita.tomonori at lab.ntt.co.jp
- Gaetano Catalli gaetano.catalli at gmail.com
- Giuseppe Lettieri g.lettieri at iet.unipi.it
-diff --git a/lib/util.h b/lib/util.h
-index 0db41be..a899065 100644
---- a/lib/util.h
-+++ b/lib/util.h
-@@ -87,8 +87,23 @@ void ovs_assert_failure(const char *, const char *, const char *) NO_RETURN;
-
- extern const char *program_name;
-
-+#define __ARRAY_SIZE_NOCHECK(ARRAY) (sizeof(ARRAY) / sizeof((ARRAY)[0]))
-+#ifdef __GNUC__
-+/* return 0 for array types, 1 otherwise */
-+#define __ARRAY_CHECK(ARRAY) \
-+ !__builtin_types_compatible_p(typeof(ARRAY), typeof(&ARRAY[0]))
-+
-+/* compile-time fail if not array */
-+#define __ARRAY_FAIL(ARRAY) (sizeof(char[-2*!__ARRAY_CHECK(ARRAY)]))
-+#define __ARRAY_SIZE(ARRAY) \
-+ __builtin_choose_expr(__ARRAY_CHECK(ARRAY), \
-+ __ARRAY_SIZE_NOCHECK(ARRAY), __ARRAY_FAIL(ARRAY))
-+#else
-+#define __ARRAY_SIZE(ARRAY) __ARRAY_SIZE_NOCHECK(ARRAY)
-+#endif
-+
- /* Returns the number of elements in ARRAY. */
--#define ARRAY_SIZE(ARRAY) (sizeof ARRAY / sizeof *ARRAY)
-+#define ARRAY_SIZE(ARRAY) __ARRAY_SIZE(ARRAY)
-
- /* Returns X / Y, rounding up. X must be nonnegative to round correctly. */
- #define DIV_ROUND_UP(X, Y) (((X) + ((Y) - 1)) / (Y))
---
-1.8.4.2
-
diff --git a/openvswitch.spec b/openvswitch.spec
index 67ffdf2..707742a 100644
--- a/openvswitch.spec
+++ b/openvswitch.spec
@@ -14,7 +14,7 @@
%endif
Name: openvswitch
-Version: 2.0.1
+Version: 2.1.0
Release: 1%{?dist}
Summary: Open vSwitch daemon/database/utilities
@@ -29,11 +29,14 @@ Source3: openvswitch.logrotate
Source6: ovsdbmonitor.desktop
Source9: README.RHEL
-Patch1: openvswitch-util-use-gcc-builtins-to-better-check-array-sizes.patch
-Patch2: openvswitch-fedora-package-fix-systemd-ordering-and-deps.patch
-Patch3: openvswitch-initscripts-add-tunnel-support.patch
-Patch4: openvswitch-rhel-Enable-DHCP-support-for-internal-ports.patch
+Patch1: openvswitch-fedora-package-fix-systemd-ordering-and-deps.patch
+Patch2: openvswitch-rhel-Enable-DHCP-support-for-internal-ports.patch
+Patch3: openvswitch-bridge-don-t-bring-up-internal-ports-by-default.patch
+Patch4: openvswitch-ovs-lib-allow-non-root-users-to-check-service-status.patch
+Patch5: openvswitch-rhel-Add-Patch-Port-support-to-initscripts.patch
+
+BuildRequires: autoconf
BuildRequires: systemd-units openssl openssl-devel
BuildRequires: python python-twisted-core python-zope-interface PyQt4
BuildRequires: desktop-file-utils
@@ -42,11 +45,13 @@ BuildRequires: groff graphviz
BuildRequires: python-twisted-conch
%endif
-Requires: openssl iproute module-init-tools
+Requires: openssl iproute module-init-tools
+Requires: kernel >= 3.15.0-0
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
+Obsoletes: openvswitch-controller <= 0:2.1.0-1
%description
Open vSwitch provides standard network bridging functions and
@@ -88,16 +93,6 @@ Requires: python python-twisted-core python-twisted-web
Utilities that are useful to diagnose performance and connectivity
issues in Open vSwitch setup.
-%package controller
-Summary: Open vSwitch OpenFlow controller
-License: ASL 2.0
-Requires: openvswitch = %{version}-%{release}
-
-%description controller
-Simple reference implementation of an OpenFlow controller for Open
-vSwitch. Manages any number of remote switches over OpenFlow protocol,
-causing them to function as L2 MAC-learning switches or hub.
-
%package devel
Summary: Open vSwitch OpenFlow development package (library, headers)
License: ASL 2.0
@@ -113,6 +108,7 @@ files needed to build an external application.
%patch2 -p1
%patch3 -p1
%patch4 -p1
+%patch5 -p1
%build
%configure --enable-ssl --with-pkidir=%{_sharedstatedir}/openvswitch/pki
@@ -171,10 +167,6 @@ rm -f $RPM_BUILD_ROOT%{_datadir}/applications/ovsdbmonitor.desktop
rm -rf $RPM_BUILD_ROOT%{_docdir}/ovsdbmonitor
%endif
-# devel files
-install -p -D -m 0644 lib/libopenvswitch.a \
- $RPM_BUILD_ROOT%{_libdir}/openvswitch/libopenvswitch.a
-
install -d -m 0755 $RPM_BUILD_ROOT%{_includedir}/openvswitch
install -p -D -m 0644 include/openvswitch/*.h \
-t $RPM_BUILD_ROOT%{_includedir}/openvswitch
@@ -251,6 +243,7 @@ install -p -D -m 0644 include/openflow/*.h \
%{_bindir}/ovsdb-client
%{_bindir}/ovsdb-tool
%{_bindir}/ovs-parse-backtrace
+%{_bindir}/vtep-ctl
# ovs-bugtool is LGPLv2+
%{_sbindir}/ovs-bugtool
%{_sbindir}/ovs-vswitchd
@@ -262,6 +255,8 @@ install -p -D -m 0644 include/openflow/*.h \
%{_mandir}/man1/ovsdb-server.1*
%{_mandir}/man1/ovsdb-tool.1*
%{_mandir}/man5/ovs-vswitchd.conf.db.5*
+%{_mandir}/man5/vtep.5*
+%{_mandir}/man8/vtep-ctl.8*
%{_mandir}/man8/ovs-appctl.8*
%{_mandir}/man8/ovs-bugtool.8*
%{_mandir}/man8/ovs-ctl.8*
@@ -302,16 +297,24 @@ install -p -D -m 0644 include/openflow/*.h \
%{_mandir}/man8/ovs-l3ping.8*
%{python_sitelib}/ovstest
-%files controller
-%{_bindir}/ovs-controller
-%{_mandir}/man8/ovs-controller.8*
-
%files devel
-%{_libdir}/openvswitch/libopenvswitch.a
+%{_libdir}/*.a
+%{_libdir}/*.la
%{_includedir}/openvswitch/*
%{_includedir}/openflow/*
%changelog
+* Tue Mar 25 2014 Flavio Leitner - 2.1.0-1
+- updated to 2.1.0
+- obsoleted openvswitch-controller package
+- requires kernel 3.15.0-0 or newer
+ (kernel commit 4f647e0a3c37b8d5086214128614a136064110c3
+ openvswitch: fix a possible deadlock and lockdep warning)
+- ovs-lib: allow non-root users to check service status
+ (upstream commit 691e47554dd03dd6492e00bab5bd6d215f5cbd4f)
+- rhel: Add Patch Port support to initscripts
+ (upstream commit e2bcc8ef49f5e51f48983b87ab1010f0f9ab1454)
+
* Mon Jan 27 2014 Flavio Leitner - 2.0.1-1
- updated to 2.0.1
diff --git a/sources b/sources
index 3f587c9..387296d 100644
--- a/sources
+++ b/sources
@@ -1 +1 @@
-a2122b1c293c8d05dc0c673d42a9da08 openvswitch-2.0.1.tar.gz
+7c5861b0ef7f3002c15c61be6f5066f2 openvswitch-2.1.0.tar.gz
--
cgit v0.10.2
http://pkgs.fedoraproject.org/cgit/openvswitch.git/commit/?h=f20&id=961b7257d739f0b7e0c7d9660811ac693b17cab1
More information about the scm-commits
mailing list