pavlix pushed to iproute (master). "clean up the patches"
notifications at fedoraproject.org
notifications at fedoraproject.org
Fri Apr 10 10:41:01 UTC 2015
>From cfb7669cf663dd641d93c80c675371504eb93659 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
Date: Thu, 9 Apr 2015 15:41:57 +0200
Subject: clean up the patches
diff --git a/iproute.spec b/iproute.spec
index 7e54404..175f400 100644
--- a/iproute.spec
+++ b/iproute.spec
@@ -8,17 +8,66 @@ URL: http://kernel.org/pub/linux/utils/net/%{name}2/
Source0: http://kernel.org/pub/linux/utils/net/%{name}2/%{name}2-%{version}.tar.xz
Source1: cbq-0000.example
Source2: avpkt
-Patch0: man-pages.patch
-Patch1: iproute2-3.4.0-kernel.patch
-Patch2: iproute2-3.15.0-optflags.patch
-Patch3: iproute2-3.9.0-IPPROTO_IP_for_SA.patch
-Patch4: iproute2-example-cbq-service.patch
-Patch5: iproute2-2.6.35-print-route.patch
-Patch6: iproute2-3.12.0-lnstat-dump-to-stdout.patch
-# Rejected by upstream <http://thread.gmane.org/gmane.linux.network/284101>
-Patch7: iproute2-3.11.0-tc-ok.patch
-Patch8: iproute2-3.11.0-rtt.patch
-Patch9: iproute2-3.12.0-lnstat-interval.patch
+
+# Selective git diff between release and master. Updating this pachage
+# using current may require updating one or more of the subsequent
+# patches.
+#
+# git diff v3.19.0..master man
+Patch0: iproute2-3.19.0-diff.patch
+# manpage/help improvements
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=1072441
+# https://bugzilla.redhat.com/show_bug.cgi?id=1075692
+# https://bugzilla.redhat.com/show_bug.cgi?id=1077191
+# https://bugzilla.redhat.com/show_bug.cgi?id=1105438
+# https://bugzilla.redhat.com/show_bug.cgi?id=1121261
+#
+# TODO submit upstream
+Patch1: iproute2-3.19.0-docs.patch
+# build system improvements
+#
+# (no bugzilla tickets)
+#
+# TODO submit upstream
+Patch2: iproute2-3.19.0-build.patch
+# ip-xfrm: support 'proto any' with 'sport' and 'dport'
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=497355
+#
+# TODO: submit upstream
+Patch3: iproute2-3.19.0-proto-any.patch
+# cbq: fix find syntax in example
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=539232
+#
+# TODO: submit upstream
+Patch4: iproute2-3.19.0-cbq-example.patch
+# ip-route: don't hide routes with RTM_F_CLONED by default
+#
+# (no bugzilla ticket)
+#
+# TODO: submit upstream
+Patch5: iproute2-3.19.0-route-cloned.patch
+# lnstat: dump to stdout, not stderr
+#
+# TODO: submit upstream
+Patch6: iproute2-3.19.0-lnstat-stdout.patch
+# lnstat: run indefinitely by default
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=977845
+#
+# TODO: submit upstream
+Patch7: iproute2-3.19.0-lnstat-interval.patch
+# tc: add -OK option
+#
+# http://thread.gmane.org/gmane.linux.network/284101
+#
+# Rejected by upstream.
+#
+# TODO: Retry upstreaming and decide whether it's needed in Fedora.
+Patch8: iproute2-3.11.0-tc-ok.patch
+
License: GPLv2+ and Public Domain
BuildRequires: bison
BuildRequires: flex
@@ -63,18 +112,17 @@ The libnetlink static library.
%prep
%setup -q -n %{name}2-%{version}
%patch0 -p1
-%patch1 -p1 -b .kernel
-%patch2 -p1 -b .opt_flags
-%patch3 -p1 -b .ipproto
-%patch4 -p1 -b .fix_cbq
-%patch5 -p1 -b .print-route
-%patch6 -p1 -b .lnstat-dump-to-stdout
-%patch7 -p1 -b .tc_ok
-%patch8 -p1 -b .rtt
-%patch9 -p1 -b .lnstat-interval
-sed -i 's/^LIBDIR=/LIBDIR?=/' Makefile
+%patch1 -p1
+%patch2 -p1
+%patch3 -p1
+%patch4 -p1
+%patch5 -p1
+%patch6 -p1
+%patch7 -p1
+%patch8 -p1
%build
+export CFLAGS="%{optflags}"
export LIBDIR=/%{_libdir}
export IPT_LIB_DIR=/%{_lib}/xtables
./configure
@@ -82,6 +130,8 @@ make %{?_smp_mflags}
make -C doc
%install
+# TODO: Update upstream build system so that we don't need to handle
+# installation manually.
mkdir -p \
%{buildroot}%{_includedir} \
%{buildroot}%{_sbindir} \
diff --git a/iproute2-2.6.35-print-route.patch b/iproute2-2.6.35-print-route.patch
deleted file mode 100644
index 04f3cf7..0000000
--- a/iproute2-2.6.35-print-route.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/ip/iproute.c b/ip/iproute.c
-index 711576e..86c7ab7 100644
---- a/ip/iproute.c
-+++ b/ip/iproute.c
-@@ -160,7 +160,7 @@ int print_route(const struct sockaddr_nl *who, struct nlmsghdr *n, void *arg)
- if (r->rtm_family == AF_INET6 && table != RT_TABLE_MAIN)
- ip6_multiple_tables = 1;
-
-- if (filter.cloned == !(r->rtm_flags&RTM_F_CLONED))
-+ if (filter.cloned && !(r->rtm_flags&RTM_F_CLONED))
- return 0;
-
- if (r->rtm_family == AF_INET6 && !ip6_multiple_tables) {
diff --git a/iproute2-3.11.0-rtt.patch b/iproute2-3.11.0-rtt.patch
deleted file mode 100644
index ef36077..0000000
--- a/iproute2-3.11.0-rtt.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/lib/utils.c b/lib/utils.c
-index dae1b51..8a1a65d 100644
---- a/lib/utils.c
-+++ b/lib/utils.c
-@@ -165,8 +165,6 @@ int get_time_rtt(unsigned *val, const char *arg, int *raw)
- t = (double)res;
- }
-
-- if (p == arg)
-- return -1;
- *raw = 1;
-
- if (*p) {
diff --git a/iproute2-3.12.0-lnstat-dump-to-stdout.patch b/iproute2-3.12.0-lnstat-dump-to-stdout.patch
deleted file mode 100644
index d16a4bb..0000000
--- a/iproute2-3.12.0-lnstat-dump-to-stdout.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/misc/lnstat.c b/misc/lnstat.c
-index d6415ef..8608cfa 100644
---- a/misc/lnstat.c
-+++ b/misc/lnstat.c
-@@ -351,7 +351,7 @@ int main(int argc, char **argv)
-
- switch (mode) {
- case MODE_DUMP:
-- lnstat_dump(stderr, lnstat_files);
-+ lnstat_dump(stdout, lnstat_files);
- break;
-
- case MODE_NORMAL:
diff --git a/iproute2-3.12.0-lnstat-interval.patch b/iproute2-3.12.0-lnstat-interval.patch
deleted file mode 100644
index b20f079..0000000
--- a/iproute2-3.12.0-lnstat-interval.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-diff --git a/misc/lnstat.c b/misc/lnstat.c
-index 8608cfa..8e8b1ba 100644
---- a/misc/lnstat.c
-+++ b/misc/lnstat.c
-@@ -253,7 +253,7 @@ int main(int argc, char **argv)
- MODE_JSON,
- MODE_NORMAL,
- } mode = MODE_NORMAL;
-- unsigned long count = 1;
-+ unsigned long count = 0;
- struct table_hdr *header;
- static struct field_params fp;
- int num_req_files = 0;
-@@ -366,7 +366,7 @@ int main(int argc, char **argv)
- if (interval < 1 )
- interval = 1;
-
-- for (i = 0; i < count; i++) {
-+ for (i = 0; i < count || !count; ) {
- lnstat_update(lnstat_files);
- if (mode == MODE_JSON)
- print_json(stdout, lnstat_files, &fp);
-@@ -377,8 +377,10 @@ int main(int argc, char **argv)
- print_line(stdout, lnstat_files, &fp);
- }
- fflush(stdout);
-- if (i < count - 1)
-+ if (i < count - 1 || !count)
- sleep(interval);
-+ if (count)
-+ ++i;
- }
- break;
- }
diff --git a/iproute2-3.15.0-optflags.patch b/iproute2-3.15.0-optflags.patch
deleted file mode 100644
index 025f60a..0000000
--- a/iproute2-3.15.0-optflags.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/Makefile b/Makefile
-index c881200..e8eeeb7 100644
---- a/Makefile
-+++ b/Makefile
-@@ -34,7 +34,7 @@ CCOPTS = -O2
- WFLAGS := -Wall -Wstrict-prototypes -Wmissing-prototypes
- WFLAGS += -Wmissing-declarations -Wold-style-definition -Wformat=2
-
--CFLAGS = $(WFLAGS) $(CCOPTS) -I../include $(DEFINES)
-+CFLAGS = $(WFLAGS) $(CCOPTS) -I../include $(DEFINES) $(RPM_OPT_FLAGS)
- YACCFLAGS = -d -t -v
-
- SUBDIRS=lib ip tc bridge misc netem genl man
diff --git a/iproute2-3.16.0-ip-link-add-name.patch b/iproute2-3.16.0-ip-link-add-name.patch
deleted file mode 100644
index 8fcbc4d..0000000
--- a/iproute2-3.16.0-ip-link-add-name.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From f1b66ff83a0babbe99fef81b3a960d7a4ce8dbc6 Mon Sep 17 00:00:00 2001
-From: vadimk <vadim4j at gmail.com>
-Date: Sat, 30 Aug 2014 15:06:00 +0300
-Subject: [PATCH] ip link: Remove unnecessary device checking
-
-The real checking is performed later in iplink_modify(..) func which
-checks device existence if NLM_F_CREATE flag is set.
-
-Also it fixes the case when impossible to add veth link which was
-caused by 9a02651a87 (ip: check for missing dev arg when doing VF rate)
-because these devices are not exist yet.
-
-Signed-off-by: Vadim Kochan <vadim4j at gmail.com>
-Acked-by: Oliver Hartkopp <socketcan at hartkopp.net>
-Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
----
- ip/iplink.c | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/ip/iplink.c b/ip/iplink.c
-index 1a907d9..ea06871 100644
---- a/ip/iplink.c
-+++ b/ip/iplink.c
-@@ -593,8 +593,6 @@ int iplink_parse(int argc, char **argv, struct iplink_req *req,
- duparg2("dev", *argv);
- *dev = *argv;
- dev_index = ll_name_to_index(*dev);
-- if (dev_index == 0)
-- invarg("Unknown device", *argv);
- }
- argc--; argv++;
- }
---
-2.1.0
-
diff --git a/iproute2-3.19.0-build.patch b/iproute2-3.19.0-build.patch
new file mode 100644
index 0000000..ae6e9d8
--- /dev/null
+++ b/iproute2-3.19.0-build.patch
@@ -0,0 +1,66 @@
+From af8fba0402dda8e459399542d19d5a9afebe71b2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:02 +0100
+Subject: [PATCH 2/7] turn Makefile more distribution friendly
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Changes:
+
+ * Accept directory settings from environment.
+ * Remove redundant ROOTDIR variable.
+ * Set KERNEL_INCLUDE default to '/usr/include'.
+ * Use CFLAGS from environemnt.
+
+Note: In the long term it might be better to improve the configure
+script to generate those parts of the Makefile in a manner similar
+to autoconf. It might be even practical to autotoolize the package.
+
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ Makefile | 22 +++++++++++-----------
+ 1 file changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 9dbb29f..18faee4 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,15 +1,15 @@
+-ROOTDIR=$(DESTDIR)
+-PREFIX=/usr
+-LIBDIR=$(PREFIX)/lib
+-SBINDIR=/sbin
+-CONFDIR=/etc/iproute2
+-DATADIR=$(PREFIX)/share
+-DOCDIR=$(DATADIR)/doc/iproute2
+-MANDIR=$(DATADIR)/man
+-ARPDDIR=/var/lib/arpd
++PREFIX?=/usr
++LIBDIR?=$(PREFIX)/lib
++SBINDIR?=/sbin
++CONFDIR?=/etc/iproute2
++DATADIR?=$(PREFIX)/share
++DOCDIR?=$(DATADIR)/doc/iproute2
++MANDIR?=$(DATADIR)/man
++ARPDDIR?=/var/lib/arpd
++KERNEL_INCLUDE?=/usr/include
+
+ # Path to db_185.h include
+-DBM_INCLUDE:=$(ROOTDIR)/usr/include
++DBM_INCLUDE:=$(DESTDIR)/usr/include
+
+ SHARED_LIBS = y
+
+@@ -33,7 +33,7 @@ CCOPTS = -O2
+ WFLAGS := -Wall -Wstrict-prototypes -Wmissing-prototypes
+ WFLAGS += -Wmissing-declarations -Wold-style-definition -Wformat=2
+
+-CFLAGS = $(WFLAGS) $(CCOPTS) -I../include $(DEFINES)
++CFLAGS := $(WFLAGS) $(CCOPTS) -I../include $(DEFINES) $(CFLAGS)
+ YACCFLAGS = -d -t -v
+
+ SUBDIRS=lib ip tc bridge misc netem genl man
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-cbq-example.patch b/iproute2-3.19.0-cbq-example.patch
new file mode 100644
index 0000000..c451573
--- /dev/null
+++ b/iproute2-3.19.0-cbq-example.patch
@@ -0,0 +1,59 @@
+From ee92ed5c996f95e1f14da3945cb8f92becbfdf2c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:03 +0100
+Subject: [PATCH 4/7] cbq: fix find syntax in example
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Without modification, using the example resulted in the following error:
+
+[root at localhost sbin]# cbq restart
+find: warning: you have specified the -maxdepth option after a
+non-option argument (, but options are not positional (-maxdepth affects
+tests specified before it as well as those specified after it). Please
+specify options before other arguments.
+
+find: warning: you have specified the -maxdepth option after a
+non-option argument (, but options are not positional (-maxdepth affects
+tests specified before it as well as those specified after it). Please
+specify options before other arguments.
+
+**CBQ: failed to compile CBQ configuration!
+
+See also:
+
+ * https://bugzilla.redhat.com/show_bug.cgi?id=539232
+
+Reported-By: Mads Kiilerich <mads at kiilerich.com>
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ examples/cbq.init-v0.7.3 | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/examples/cbq.init-v0.7.3 b/examples/cbq.init-v0.7.3
+index 35a0a05..1bc0d44 100644
+--- a/examples/cbq.init-v0.7.3
++++ b/examples/cbq.init-v0.7.3
+@@ -578,14 +578,14 @@ cbq_show () {
+ ### Check configuration and load DEVICES, DEVFIELDS and CLASSLIST from $1
+ cbq_init () {
+ ### Get a list of configured classes
+- CLASSLIST=`find $1 \( -type f -or -type l \) -name 'cbq-*' \
+- -not -name '*~' -maxdepth 1 -printf "%f\n"| sort`
++ CLASSLIST=`find $1 -maxdepth 1 \( -type f -or -type l \) -name 'cbq-*' \
++ -not -name '*~' -printf "%f\n"| sort`
+ [ -z "$CLASSLIST" ] &&
+ cbq_failure "no configuration files found in $1!"
+
+ ### Gather all DEVICE fields from $1/cbq-*
+- DEVFIELDS=`find $1 \( -type f -or -type l \) -name 'cbq-*' \
+- -not -name '*~' -maxdepth 1| xargs sed -n 's/#.*//; \
++ DEVFIELDS=`find $1 -maxdepth 1 \( -type f -or -type l \) -name 'cbq-*' \
++ -not -name '*~' | xargs sed -n 's/#.*//; \
+ s/[[:space:]]//g; /^DEVICE=[^,]*,[^,]*\(,[^,]*\)\?/ \
+ { s/.*=//; p; }'| sort -u`
+ [ -z "$DEVFIELDS" ] &&
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-diff.patch b/iproute2-3.19.0-diff.patch
new file mode 100644
index 0000000..66b8e49
--- /dev/null
+++ b/iproute2-3.19.0-diff.patch
@@ -0,0 +1,1621 @@
+diff --git a/man/man8/Makefile b/man/man8/Makefile
+index e998928..152747a 100644
+--- a/man/man8/Makefile
++++ b/man/man8/Makefile
+@@ -6,7 +6,7 @@ MAN8PAGES = $(TARGETS) ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 ss.8 \
+ tc-mqprio.8 tc-netem.8 tc-pfifo.8 tc-pfifo_fast.8 tc-prio.8 tc-red.8 \
+ tc-sfb.8 tc-sfq.8 tc-stab.8 tc-tbf.8 \
+ bridge.8 rtstat.8 ctstat.8 nstat.8 routef.8 \
+- ip-addrlabel.8 ip-l2tp.8 \
++ ip-addrlabel.8 ip-fou.8 ip-gue.8 ip-l2tp.8 \
+ ip-maddress.8 ip-monitor.8 ip-mroute.8 ip-neighbour.8 \
+ ip-netns.8 ip-ntable.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 \
+ ip-tcp_metrics.8 ip-netconf.8 ip-token.8
+diff --git a/man/man8/arpd.8 b/man/man8/arpd.8
+index fc99b97..5050a98 100644
+--- a/man/man8/arpd.8
++++ b/man/man8/arpd.8
+@@ -35,7 +35,7 @@ Suppress sending broadcast queries by the kernel. This option only makes sense t
+ Specifies the timeout of the negative cache. When resolution fails, arpd suppresses further attempts to resolve for this period. This option only makes sense together with option '-k'. This timeout should not be too much longer than the boot time of a typical host not supporting gratuitous ARP. Default value is 60 seconds.
+ .TP
+ -p <TIME>
+-The time to wait in seconds between polling attempts to the kernel ARP table. TIME may be a floating point number. The default value is 30.
++The time to wait in seconds between polling attempts to the kernel ARP table. TIME may be a floating point number. The default value is 30.
+ .TP
+ -R <RATE>
+ Maximal steady rate of broadcasts sent by arpd in packets per second. Default value is 1.
+diff --git a/man/man8/bridge.8 b/man/man8/bridge.8
+index e344db2..4135d01 100644
+--- a/man/man8/bridge.8
++++ b/man/man8/bridge.8
+@@ -40,7 +40,8 @@ bridge \- show / manipulate bridge addresses and devices
+ .BR learning " { " on " | " off " } ] [ "
+ .BR learning_sync " { " on " | " off " } ] [ "
+ .BR flood " { " on " | " off " } ] [ "
+-.BR hwmode " { " vepa " | " veb " } ] "
++.BR hwmode " { " vepa " | " veb " } ] [ "
++.BR self " ] [ " master " ] "
+
+ .ti -8
+ .BR "bridge link" " [ " show " ] [ "
+@@ -53,7 +54,7 @@ bridge \- show / manipulate bridge addresses and devices
+ .B dev
+ .IR DEV " { "
+ .BR local " | " temp " } { "
+-.BR self " } { " embedded " } { " router " } [ "
++.BR self " } { " router " } [ "
+ .B dst
+ .IR IPADDR " ] [ "
+ .B vni
+@@ -110,7 +111,7 @@ utility and exit.
+
+ .TP
+ .BR "\-s" , " \-stats", " \-statistics"
+-output more information. If this option
++output more information. If this option
+ is given multiple times, the amount of information increases.
+ As a rule, the information is statistics or some time values.
+
+@@ -168,9 +169,9 @@ and
+ (or
+ .B list
+ ) objects, but some objects do not allow all of these operations
+-or have some additional commands. The
++or have some additional commands. The
+ .B help
+-command is available for all objects. It prints
++command is available for all objects. It prints
+ out a list of available commands and argument syntax conventions.
+ .sp
+ If no command is given, some default command is assumed.
+@@ -200,68 +201,70 @@ the STP path cost of the specified port.
+
+ .TP
+ .BI priority " PRIO "
+-the STP port priority. The priority value is an unsigned 8-bit quantity
+-(number between 0 and 255). This metric is used in the designated port an
++the STP port priority. The priority value is an unsigned 8-bit quantity
++(number between 0 and 255). This metric is used in the designated port an
+ droot port selectio algorithms.
+
+ .TP
+ .BI state " STATE "
+-the operation state of the port. This is primarily used by user space STP/RSTP
+-implementation. The following is a list of valid values:
++the operation state of the port. This is primarily used by user space STP/RSTP
++implementation. One may enter a lowercased port state name, or one of the
++numbers below. Negative inputs are ignored, and unrecognized names return an
++error.
+
+ .B 0
+-- port is DISABLED. Make this port completely inactive.
++- port is DISABLED. Make this port completely inactive.
+ .sp
+
+ .B 1
+-- STP LISTENING state. Only valid if STP is enabled on the brige. In this
++- STP LISTENING state. Only valid if STP is enabled on the brige. In this
+ state the port for list for STP BPDUs and drop all other traffic.
+ .sp
+
+ .B 2
+-- STP LEARNING state. Only valid if STP is enabled on the bridge. In this
++- STP LEARNING state. Only valid if STP is enabled on the bridge. In this
+ state the port will accept traffic only for the purpose of updating MAC
+ adress tables.
+ .sp
+
+ .B 3
+-- STP FORWARDING state. Port is fully active.
++- STP FORWARDING state. Port is fully active.
+ .sp
+
+ .B 4
+-- STP BLOCKING state. Only valid if STP is enabled on the bridge. This state
+-is used during the STP election process. In this state, port will only process
++- STP BLOCKING state. Only valid if STP is enabled on the bridge. This state
++is used during the STP election process. In this state, port will only process
+ STP BPDUs.
+ .sp
+
+ .TP
+ .BR "guard on " or " guard off "
+-Controls whether STP BPUDs will be processed by the bridge port. By default,
+-the flag is turned off allowed BPDU processing. Turning this flag on will
++Controls whether STP BPUDs will be processed by the bridge port. By default,
++the flag is turned off allowed BPDU processing. Turning this flag on will
+ cause the port to stop processing STP BPDUs.
+
+ .TP
+ .BR "hairpin on " or " hairpin off "
+ Controls whether traffic may be send back out of the port on which it was
+-received. By default, this flag is turned off and the bridge will not forward
++received. By default, this flag is turned off and the bridge will not forward
+ traffic back out of the receiving port.
+
+ .TP
+ .BR "fastleave on " or " fastleave off "
+ This flag allows the bridge to immediately stop multicast traffic on a port
+-that receives IGMP Leave message. It is only used with IGMP snooping is
+-enabled on the bridge. By default the flag is off.
++that receives IGMP Leave message. It is only used with IGMP snooping is
++enabled on the bridge. By default the flag is off.
+
+ .TP
+ .BR "root_block on " or " root_block off "
+-Controls whether a given port is allowed to become root port or not. Only used
+-when STP is enabled on the bridge. By default the flag is off.
++Controls whether a given port is allowed to become root port or not. Only used
++when STP is enabled on the bridge. By default the flag is off.
+
+ .TP
+ .BR "learning on " or " learning off "
+ Controls whether a given port will learn MAC addresses from received traffic or
+-not. If learning if off, the bridge will end up flooding any traffic for which
+-it has no FDB entry. By default this flag is on.
++not. If learning if off, the bridge will end up flooding any traffic for which
++it has no FDB entry. By default this flag is on.
+
+ .TP
+ .BR "learning_sync on " or " learning_sync off "
+@@ -270,12 +273,12 @@ bridge FDB.
+
+ .TP
+ .BR "flooding on " or " flooding off "
+-Controls whether a given port will flood unicast traffic for which there is no FDB entry. By default this flag is on.
++Controls whether a given port will flood unicast traffic for which there is no FDB entry. By default this flag is on.
+
+ .TP
+ .BI hwmode
+ Some network interface cards support HW bridge functionality and they may be
+-configured in different modes. Currently support modes are:
++configured in different modes. Currently support modes are:
+
+ .B vepa
+ - Data sent between HW ports is sent on the wire to the external
+@@ -284,6 +287,15 @@ switch.
+ .B veb
+ - bridging happens in hardware.
+
++.TP
++.BI self
++link setting is configured on specified physical device
++
++.TP
++.BI master
++link setting is configured on the software bridge (default)
++
++
+ .SS bridge link show - list bridge port configuration.
+
+ This command displays the current bridge port configuration and flags.
+@@ -314,10 +326,6 @@ the interface to which this address is associated.
+ - the address is associated with a software fdb (default)
+ .sp
+
+-.B embedded
+-- the address is associated with an offloaded fdb
+-.sp
+-
+ .B router
+ - the destination address is associated with a router.
+ Valid if the referenced device is a VXLAN type device and has
+@@ -381,7 +389,7 @@ This command displays the current forwarding table.
+ .PP
+ With the
+ .B -statistics
+-option, the command becomes verbose. It prints out the last updated
++option, the command becomes verbose. It prints out the last updated
+ and last used time for each entry.
+
+ .SH bridge mdb - multicast group database management
+@@ -444,7 +452,7 @@ bridge interfaces.
+ .PP
+ With the
+ .B -details
+-option, the command becomes verbose. It prints out the ports known to have
++option, the command becomes verbose. It prints out the ports known to have
+ a connected router.
+
+ .SH bridge vlan - VLAN filter list
+@@ -479,7 +487,7 @@ the vlan specified is to be treated as untagged on egress.
+
+ .TP
+ .BI self
+-the vlan is configured on the specified physical device. Required if the
++the vlan is configured on the specified physical device. Required if the
+ device is the bridge device.
+
+ .TP
+@@ -505,7 +513,7 @@ This command displays the current VLAN filter table.
+ The
+ .B bridge
+ utility can monitor the state of devices and addresses
+-continuously. This option has a slightly different format.
++continuously. This option has a slightly different format.
+ Namely, the
+ .B monitor
+ command is the first in the command line and then the object list follows:
+@@ -527,7 +535,7 @@ described in previous sections.
+ .P
+ If a file name is given, it does not listen on RTNETLINK,
+ but opens the file containing RTNETLINK messages saved in binary format
+-and dumps them. Such a history file can be generated with the
++and dumps them. Such a history file can be generated with the
+
+
+ .SH NOTES
+diff --git a/man/man8/ip-address.8.in b/man/man8/ip-address.8.in
+index d33b1ed..6e46af8 100644
+--- a/man/man8/ip-address.8.in
++++ b/man/man8/ip-address.8.in
+@@ -80,7 +80,7 @@ the name of the device to add the address to.
+ .BI local " ADDRESS " (default)
+ the address of the interface. The format of the address depends
+ on the protocol. It is a dotted quad for IP and a sequence of
+-hexadecimal halfwords separated by colons for IPv6. The
++hexadecimal halfwords separated by colons for IPv6. The
+ .I ADDRESS
+ may be followed by a slash and a decimal number which encodes
+ the network prefix length.
+@@ -91,8 +91,8 @@ the address of the remote endpoint for pointopoint interfaces.
+ Again, the
+ .I ADDRESS
+ may be followed by a slash and a decimal number, encoding the network
+-prefix length. If a peer address is specified, the local address
+-cannot have a prefix length. The network prefix is associated
++prefix length. If a peer address is specified, the local address
++cannot have a prefix length. The network prefix is associated
+ with the peer rather than with the local address.
+
+ .TP
+@@ -103,7 +103,7 @@ It is possible to use the special symbols
+ .B '+'
+ and
+ .B '-'
+-instead of the broadcast address. In this case, the broadcast address
++instead of the broadcast address. In this case, the broadcast address
+ is derived by setting/resetting the host bits of the interface prefix.
+
+ .TP
+@@ -139,7 +139,7 @@ valid inside this site.
+ .B Arguments:
+ coincide with the arguments of
+ .B ip addr add.
+-The device name is a required argument. The rest are optional.
++The device name is a required argument. The rest are optional.
+ If no arguments are given, the first address is deleted.
+
+ .SS ip address show - look at protocol addresses
+@@ -221,14 +221,14 @@ The difference is that it does not run when no arguments are given.
+ .B Warning:
+ This command (and other
+ .B flush
+-commands described below) is pretty dangerous. If you make a mistake,
++commands described below) is pretty dangerous. If you make a mistake,
+ it will not forgive it, but will cruelly purge all the addresses.
+
+ .PP
+ With the
+ .B -statistics
+ option, the command becomes verbose. It prints out the number of deleted
+-addresses and the number of rounds made to flush the address list. If
++addresses and the number of rounds made to flush the address list. If
+ this option is given twice,
+ .B ip address flush
+ also dumps all the deleted addresses in the format described in the
+diff --git a/man/man8/ip-addrlabel.8 b/man/man8/ip-addrlabel.8
+index fefc3ef..5fc18fe 100644
+--- a/man/man8/ip-addrlabel.8
++++ b/man/man8/ip-addrlabel.8
+@@ -35,7 +35,7 @@ ip-addrlabel \- protocol address label management
+
+ .SH "DESCRIPTION"
+ IPv6 address labels are used for address selection;
+-they are described in RFC 3484. Precedence is managed by userspace,
++they are described in RFC 3484. Precedence is managed by userspace,
+ and only the label itself is stored in the kernel.
+
+ .SS ip addrlabel add - add an address label
+diff --git a/man/man8/ip-l2tp.8 b/man/man8/ip-l2tp.8
+index 2efda9f..1738035 100644
+--- a/man/man8/ip-l2tp.8
++++ b/man/man8/ip-l2tp.8
+@@ -356,16 +356,16 @@ the recipient expects to receive ethernet frames exactly as
+ transmitted. In such cases, it is important that frames leaving the
+ tunnel are reassembled back into a single frame before being
+ forwarded on. To do so, enable netfilter connection tracking
+-(conntrack) or manually load the Linux netfilter degrag modules at
++(conntrack) or manually load the Linux netfilter defrag modules at
+ each tunnel endpoint.
+ .PP
+ .nf
+-site-A:# modprobe nf_degrag_ipv4
++site-A:# modprobe nf_defrag_ipv4
+
+-site-B:# modprobe nf_degrag_ipv4
++site-B:# modprobe nf_defrag_ipv4
+ .fi
+ .PP
+-If L2TP is being used over IPv6, use the IPv6 degrag module.
++If L2TP is being used over IPv6, use the IPv6 defrag module.
+ .SH INTEROPERABILITY
+ .PP
+ Unmanaged (static) L2TPv3 tunnels are supported by some network
+diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
+index 239f764..5ad372c 100644
+--- a/man/man8/ip-link.8.in
++++ b/man/man8/ip-link.8.in
+@@ -72,7 +72,10 @@ ip-link \- network device configuration
+ .BR gre " |"
+ .BR gretap " |"
+ .BR ip6gre " |"
+-.BR ip6gretap " ]"
++.BR ip6gretap " |"
++.BR vti " |"
++.BR nlmon " |"
++.BR ipvlan " ]"
+
+ .ti -8
+ .BI "ip link delete " DEVICE
+@@ -228,6 +231,15 @@ Link types:
+ .sp
+ .BR ip6gretap
+ - Virtual L2 tunnel interface GRE over IPv6
++.sp
++.BR vti
++- Virtual tunnel interface
++.sp
++.BR nlmon
++- Netlink monitoring device
++.sp
++.BR ipvlan
++- Interface for L3 (IPv6/IPv4) based VLANs
+ .in -8
+
+ .TP
+@@ -276,6 +288,8 @@ the following additional arguments are supported:
+ .BI ageing " SECONDS "
+ .R " ] [ "
+ .BI maxaddress " NUMBER "
++.R " ] [ "
++.B gbp
+ .R " ]"
+
+ .in +8
+@@ -298,7 +312,7 @@ parameter.
+ .BI remote " IPADDR"
+ - specifies the unicast destination IP address to use in outgoing packets
+ when the destination link layer address is not known in the VXLAN device
+-forwarding database. This parameter cannot be specified with the
++forwarding database. This parameter cannot be specified with the
+ .B group
+ parameter.
+
+@@ -348,6 +362,49 @@ are entered into the VXLAN device forwarding database.
+ .BI maxaddress " NUMBER"
+ - specifies the maximum number of FDB entries.
+
++.sp
++.B gbp
++- enables the Group Policy extension (VXLAN-GBP).
++
++.in +4
++Allows to transport group policy context across VXLAN network peers.
++If enabled, includes the mark of a packet in the VXLAN header for outgoing
++packets and fills the packet mark based on the information found in the
++VXLAN header for incomming packets.
++
++Format of upper 16 bits of packet mark (flags);
++
++.in +2
+++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
++.br
++|-|-|-|-|-|-|-|-|-|D|-|-|A|-|-|-|
++.br
+++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
++
++.B D :=
++Don't Learn bit. When set, this bit indicates that the egress
++VTEP MUST NOT learn the source address of the encapsulated frame.
++
++.B A :=
++Indicates that the group policy has already been applied to
++this packet. Policies MUST NOT be applied by devices when the A bit is set.
++.in -2
++
++Format of lower 16 bits of packet mark (policy ID):
++
++.in +2
+++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
++.br
++| Group Policy ID |
++.br
+++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
++.in -2
++
++Example:
++ iptables -A OUTPUT [...] -j MARK --set-mark 0x800FF
++
++.in -4
++
+ .in -8
+
+ .TP
+@@ -476,7 +533,7 @@ flag calculates checksums for outgoing packets.
+ The
+ .B icsum
+ flag requires that all input packets have the correct
+-checksum. The
++checksum. The
+ .B csum
+ flag is equivalent to the combination
+ .BR "icsum ocsum" .
+@@ -487,7 +544,7 @@ flag is equivalent to the combination
+
+ .sp
+ .BI encaplimit " ELIM"
+-- specifies a fixed encapsulation limit. Default is 4.
++- specifies a fixed encapsulation limit. Default is 4.
+
+ .sp
+ .BI flowlabel " FLOWLABEL"
+@@ -554,7 +611,7 @@ device.
+ .BI group " GROUP "
+ .I GROUP
+ has a dual role: If both group and dev are present, then move the device to the
+-specified group. If only a group is specified, then the command operates on
++specified group. If only a group is specified, then the command operates on
+ all devices in that group.
+
+ .TP
+@@ -580,11 +637,13 @@ flag on the device.
+ .BR "dynamic on " or " dynamic off"
+ change the
+ .B DYNAMIC
+-flag on the device.
++flag on the device. Indicates that address can change when interface goes down (currently
++.B NOT
++used by the Linux).
+
+ .TP
+ .BI name " NAME"
+-change the name of the device. This operation is not
++change the name of the device. This operation is not
+ recommended if the device is running or has some addresses
+ already configured.
+
+@@ -615,14 +674,29 @@ the interface is
+ .IR "POINTOPOINT" .
+
+ .TP
+-.BI netns " PID"
+-move the device to the network namespace associated with the process
+-.IR "PID".
+-
+-.TP
+-.BI netns " NETNSNAME"
++.BI netns " NETNSNAME " \fR| " PID"
+ move the device to the network namespace associated with name
+-.IR "NETNSNAME".
++.IR "NETNSNAME " or
++.RI process " PID".
++
++Some devices are not allowed to change network namespace: loopback, bridge,
++ppp, wireless. These are network namespace local devices. In such case
++.B ip
++tool will return "Invalid argument" error. It is possible to find out if device is local
++to a single network namespace by checking
++.B netns-local
++flag in the output of the
++.BR ethtool ":"
++
++.in +8
++.B ethtool -k
++.I DEVICE
++.in -8
++
++To change network namespace for wireless devices the
++.B iw
++tool can be used. But it allows to change network namespace only for physical devices and by process
++.IR PID .
+
+ .TP
+ .BI alias " NAME"
+@@ -720,7 +794,7 @@ If multiple parameter changes are requested,
+ aborts immediately after any of the changes have failed.
+ This is the only case when
+ .B ip
+-can move the system to an unpredictable state. The solution
++can move the system to an unpredictable state. The solution
+ is to avoid changing several parameters with one
+ .B ip link set
+ call.
+@@ -779,6 +853,12 @@ print human readable rates in IEC units (ie. 1K = 1024).
+ .I "TYPE"
+ specifies which help of link type to dislpay.
+
++.SS
++.I GROUP
++may be a number or a string from the file
++.B /etc/iproute2/group
++which can be manually filled.
++
+ .SH "EXAMPLES"
+ .PP
+ ip link show
+@@ -832,7 +912,8 @@ and the outer UDP checksum and remote checksum offload are enabled.
+
+ .SH SEE ALSO
+ .br
+-.BR ip (8)
++.BR ip (8),
++.BR ip-netns (8)
+
+ .SH AUTHOR
+ Original Manpage by Michail Litvak <mci at owl.openwall.com>
+diff --git a/man/man8/ip-maddress.8 b/man/man8/ip-maddress.8
+index 288d5cc..f3432bb 100644
+--- a/man/man8/ip-maddress.8
++++ b/man/man8/ip-maddress.8
+@@ -39,7 +39,7 @@ the device name.
+ These commands attach/detach a static link-layer multicast address
+ to listen on the interface.
+ Note that it is impossible to join protocol multicast groups
+-statically. This command only manages link-layer addresses.
++statically. This command only manages link-layer addresses.
+
+ .RS
+ .TP
+diff --git a/man/man8/ip-monitor.8 b/man/man8/ip-monitor.8
+index 544b625..1de0ca9 100644
+--- a/man/man8/ip-monitor.8
++++ b/man/man8/ip-monitor.8
+@@ -33,7 +33,7 @@ Prints short timestamp before the event message on the same line in format:
+ The
+ .B ip
+ utility can monitor the state of devices, addresses
+-and routes continuously. This option has a slightly different format.
++and routes continuously. This option has a slightly different format.
+ Namely, the
+ .B monitor
+ command is the first in the command line and then the object list follows:
+@@ -49,7 +49,7 @@ command is the first in the command line and then the object list follows:
+ is the list of object types that we want to monitor.
+ It may contain
+ .BR link ", " address ", " route ", " mroute ", " prefix ", "
+-.BR neigh " and " netconf "."
++.BR neigh ", " netconf " and " rule "."
+ If no
+ .B file
+ argument is given,
+@@ -65,7 +65,7 @@ but opens the given file, and dumps its contents. The file
+ should contain RTNETLINK messages saved in binary format.
+ Such a file can be generated with the
+ .B rtmon
+-utility. This utility has a command line syntax similar to
++utility. This utility has a command line syntax similar to
+ .BR "ip monitor" .
+ Ideally,
+ .B rtmon
+diff --git a/man/man8/ip-mroute.8 b/man/man8/ip-mroute.8
+index 3b708cf..e89b6b2 100644
+--- a/man/man8/ip-mroute.8
++++ b/man/man8/ip-mroute.8
+@@ -28,7 +28,7 @@ or
+ Due to the limitations of the current interface to the multicast routing
+ engine, it is impossible to change
+ .B mroute
+-objects administratively, so we can only display them. This limitation
++objects administratively, so we can only display them. This limitation
+ will be removed in the future.
+
+ .SS ip mroute show - list mroute cache entries
+diff --git a/man/man8/ip-neighbour.8 b/man/man8/ip-neighbour.8
+index d6adc65..b0fc0dd 100644
+--- a/man/man8/ip-neighbour.8
++++ b/man/man8/ip-neighbour.8
+@@ -152,7 +152,7 @@ only list neighbour entries in this state.
+ .I NUD_STATE
+ takes values listed below or the special value
+ .B all
+-which means all states. This option may occur more than once.
++which means all states. This option may occur more than once.
+ If this option is absent,
+ .B ip
+ lists all entries except for
+@@ -176,9 +176,9 @@ and
+ .PP
+ With the
+ .B -statistics
+-option, the command becomes verbose. It prints out the number of
++option, the command becomes verbose. It prints out the number of
+ deleted neighbours and the number of rounds made to flush the
+-neighbour table. If the option is given
++neighbour table. If the option is given
+ twice,
+ .B ip neigh flush
+ also dumps all the deleted neighbours.
+diff --git a/man/man8/ip-netns.8 b/man/man8/ip-netns.8
+index 8e6999c..80a4ad1 100644
+--- a/man/man8/ip-netns.8
++++ b/man/man8/ip-netns.8
+@@ -24,6 +24,10 @@ ip-netns \- process network namespace management
+ .RI "[ " NETNSNAME " ]"
+
+ .ti -8
++.BR "ip netns" " { " set " } "
++.I NETNSNAME NETNSID
++
++.ti -8
+ .BR "ip netns identify"
+ .RI "[ " PID " ]"
+
+@@ -42,12 +46,15 @@ ip-netns \- process network namespace management
+ A network namespace is logically another copy of the network stack,
+ with its own routes, firewall rules, and network devices.
+
++By default a process inherits its network namespace from its parent. Initially all
++the processes share the same default network namespace from the init process.
++
+ By convention a named network namespace is an object at
+ .BR "/var/run/netns/" NAME
+-that can be opened. The file descriptor resulting from opening
++that can be opened. The file descriptor resulting from opening
+ .BR "/var/run/netns/" NAME
+-refers to the specified network namespace. Holding that file
+-descriptor open keeps the network namespace alive. The file
++refers to the specified network namespace. Holding that file
++descriptor open keeps the network namespace alive. The file
+ descriptor can be used with the
+ .B setns(2)
+ system call to change the network namespace associated with a task.
+@@ -83,15 +90,55 @@ network namespace and assigns NAME.
+ .B ip [-all] netns delete [ NAME ] - delete the name of a network namespace(s)
+ .sp
+ If NAME is present in /var/run/netns it is umounted and the mount
+-point is removed. If this is the last user of the network namespace the
+-network namespace will be freed, otherwise the network namespace
+-persists until it has no more users. ip netns delete may fail if
+-the mount point is in use in another mount namespace.
++point is removed. If this is the last user of the network namespace the
++network namespace will be freed and all physical devices will be moved to the
++default one, otherwise the network namespace persists until it has no more
++users. ip netns delete may fail if the mount point is in use in another mount
++namespace.
+
+ If
+ .B -all
+ option was specified then all the network namespace names will be removed.
+
++It is possible to lose the physical device when it was moved to netns and
++then this netns was deleted with a running process:
++
++.RS 10
++$ ip netns add net0
++.RE
++.RS 10
++$ ip link set dev eth0 netns net0
++.RE
++.RS 10
++$ ip netns exec net0 SOME_PROCESS_IN_BACKGROUND
++.RE
++.RS 10
++$ ip netns del net0
++.RE
++
++.RS
++and eth0 will appear in the default netns only after SOME_PROCESS_IN_BACKGROUND
++will exit or will be killed. To prevent this the processes running in net0
++should be killed before deleting the netns:
++
++.RE
++.RS 10
++$ ip netns pids net0 | xargs kill
++.RE
++.RS 10
++$ ip netns del net0
++.RE
++
++.TP
++.B ip netns set NAME NETNSID - assign an id to a peer network namespace
++.sp
++This command assigns a id to a peer network namespace. This id is valid
++only in the current network namespace.
++This id will be used by the kernel in some netlink messages. If no id is
++assigned when the kernel needs it, it will be automatically assigned by
++the kernel.
++Once it is assigned, it's not possible to change it.
++
+ .TP
+ .B ip netns identify [PID] - Report network namespaces names for process
+ .sp
+@@ -111,7 +158,7 @@ the named network namespace as their primary network namespace.
+ This command allows applications that are network namespace unaware
+ to be run in something other than the default network namespace with
+ all of the configuration for the specified network namespace appearing
+-in the customary global locations. A network namespace and bind mounts
++in the customary global locations. A network namespace and bind mounts
+ are used to move files from their network namespace specific location
+ to their default locations without affecting other processes.
+
+diff --git a/man/man8/ip-route.8.in b/man/man8/ip-route.8.in
+index 89960c1..d53cc76 100644
+--- a/man/man8/ip-route.8.in
++++ b/man/man8/ip-route.8.in
+@@ -116,7 +116,9 @@ replace " } "
+ .B features
+ .IR FEATURES " ] [ "
+ .B quickack
+-.IR BOOL " ]"
++.IR BOOL " ] [ "
++.B congctl
++.IR NAME " ]"
+
+ .ti -8
+ .IR TYPE " := [ "
+@@ -160,7 +162,7 @@ by the route prefix.
+
+ .sp
+ .B unreachable
+-- these destinations are unreachable. Packets are discarded and the
++- these destinations are unreachable. Packets are discarded and the
+ ICMP message
+ .I host unreachable
+ is generated.
+@@ -170,47 +172,47 @@ error.
+
+ .sp
+ .B blackhole
+-- these destinations are unreachable. Packets are discarded silently.
++- these destinations are unreachable. Packets are discarded silently.
+ The local senders get an
+ .I EINVAL
+ error.
+
+ .sp
+ .B prohibit
+-- these destinations are unreachable. Packets are discarded and the
++- these destinations are unreachable. Packets are discarded and the
+ ICMP message
+ .I communication administratively prohibited
+-is generated. The local senders get an
++is generated. The local senders get an
+ .I EACCES
+ error.
+
+ .sp
+ .B local
+-- the destinations are assigned to this host. The packets are looped
++- the destinations are assigned to this host. The packets are looped
+ back and delivered locally.
+
+ .sp
+ .B broadcast
+-- the destinations are broadcast addresses. The packets are sent as
++- the destinations are broadcast addresses. The packets are sent as
+ link broadcasts.
+
+ .sp
+ .B throw
+ - a special control route used together with policy rules. If such a
+ route is selected, lookup in this table is terminated pretending that
+-no route was found. Without policy routing it is equivalent to the
+-absence of the route in the routing table. The packets are dropped
++no route was found. Without policy routing it is equivalent to the
++absence of the route in the routing table. The packets are dropped
+ and the ICMP message
+ .I net unreachable
+-is generated. The local senders get an
++is generated. The local senders get an
+ .I ENETUNREACH
+ error.
+
+ .sp
+ .B nat
+-- a special NAT route. Destinations covered by the prefix
++- a special NAT route. Destinations covered by the prefix
+ are considered to be dummy (or external) addresses which require translation
+-to real (or internal) ones before forwarding. The addresses to translate to
++to real (or internal) ones before forwarding. The addresses to translate to
+ are selected with the attribute
+ .BR "via" .
+ .B Warning:
+@@ -221,7 +223,7 @@ Route NAT is no longer supported in Linux 2.6.
+ .RI "- " "not implemented"
+ the destinations are
+ .I anycast
+-addresses assigned to this host. They are mainly equivalent
++addresses assigned to this host. They are mainly equivalent
+ to
+ .B local
+ with one difference: such addresses are invalid when used
+@@ -229,7 +231,7 @@ as the source address of any packet.
+
+ .sp
+ .B multicast
+-- a special type used for multicast routing. It is not present in
++- a special type used for multicast routing. It is not present in
+ normal routing tables.
+ .in -8
+
+@@ -245,10 +247,10 @@ Values (0, 253, 254, and 255) are reserved for built-in use.
+
+ .sp
+ Actually, one other table always exists, which is invisible but
+-even more important. It is the
++even more important. It is the
+ .B local
+-table (ID 255). This table
+-consists of routes for local and broadcast addresses. The kernel maintains
++table (ID 255). This table
++consists of routes for local and broadcast addresses. The kernel maintains
+ this table automatically and the administrator usually need not modify it
+ or even look at it.
+
+@@ -268,7 +270,7 @@ change or add new one
+ .RS
+ .TP
+ .BI to " TYPE PREFIX " (default)
+-the destination prefix of the route. If
++the destination prefix of the route. If
+ .I TYPE
+ is omitted,
+ .B ip
+@@ -279,9 +281,9 @@ Other values of
+ are listed above.
+ .I PREFIX
+ is an IP or IPv6 address optionally followed by a slash and the
+-prefix length. If the length of the prefix is missing,
++prefix length. If the length of the prefix is missing,
+ .B ip
+-assumes a full-length host route. There is also a special
++assumes a full-length host route. There is also a special
+ .I PREFIX
+ .B default
+ - which is equivalent to IP
+@@ -293,9 +295,9 @@ or to IPv6
+ .BI tos " TOS"
+ .TP
+ .BI dsfield " TOS"
+-the Type Of Service (TOS) key. This key has no associated mask and
++the Type Of Service (TOS) key. This key has no associated mask and
+ the longest match is understood as: First, compare the TOS
+-of the route and of the packet. If they are not equal, then the packet
++of the route and of the packet. If they are not equal, then the packet
+ may still match a route with a zero TOS.
+ .I TOS
+ is either an 8 bit hexadecimal number or an identifier
+@@ -332,12 +334,12 @@ the output device name.
+
+ .TP
+ .BI via " ADDRESS"
+-the address of the nexthop router. Actually, the sense of this field
+-depends on the route type. For normal
++the address of the nexthop router. Actually, the sense of this field
++depends on the route type. For normal
+ .B unicast
+ routes it is either the true next hop router or, if it is a direct
+ route installed in BSD compatibility mode, it can be a local address
+-of the interface. For NAT routes it is the first address of the block
++of the interface. For NAT routes it is the first address of the block
+ of translated IP destinations.
+
+ .TP
+@@ -356,10 +358,10 @@ may be a number or a string from the file
+ .BI mtu " MTU"
+ .TP
+ .BI "mtu lock" " MTU"
+-the MTU along the path to the destination. If the modifier
++the MTU along the path to the destination. If the modifier
+ .B lock
+ is not used, the MTU may be updated by the kernel due to
+-Path MTU Discovery. If the modifier
++Path MTU Discovery. If the modifier
+ .B lock
+ is used, no path MTU discovery will be tried, all packets
+ will be sent without the DF bit in IPv4 case or fragmented
+@@ -368,7 +370,7 @@ to MTU for IPv6.
+ .TP
+ .BI window " NUMBER"
+ the maximal window for TCP to advertise to these destinations,
+-measured in bytes. It limits maximal data bursts that our TCP
++measured in bytes. It limits maximal data bursts that our TCP
+ peers are allowed to send to us.
+
+ .TP
+@@ -389,7 +391,7 @@ above.
+ .TP
+ .BI rto_min " TIME " "(2.6.23+ only)"
+ the minimum TCP Retransmission TimeOut to use when communicating with this
+-destination. Values are specified as with
++destination. Values are specified as with
+ .BI rtt
+ above.
+
+@@ -399,7 +401,7 @@ an estimate for the initial slow start threshold.
+
+ .TP
+ .BI cwnd " NUMBER " "(2.3.15+ only)"
+-the clamp for congestion window. It is ignored if the
++the clamp for congestion window. It is ignored if the
+ .B lock
+ flag is not used.
+
+@@ -418,7 +420,7 @@ The default value is zero, meaning to use Slow Start value.
+
+ .TP
+ .BI features " FEATURES " (3.18+ only)
+-Enable or disable per-route features. Only available feature at this
++Enable or disable per-route features. Only available feature at this
+ time is
+ .B ecn
+ to enable explicit congestion notification when initiating connections to the
+@@ -433,9 +435,24 @@ sysctl is set to 0.
+ Enable or disable quick ack for connections to this destination.
+
+ .TP
++.BI congctl " NAME " "(3.20+ only)"
++.TP
++.BI "congctl lock" " NAME " "(3.20+ only)"
++Sets a specific TCP congestion control algorithm only for a given destination.
++If not specified, Linux keeps the current global default TCP congestion control
++algorithm, or the one set from the application. If the modifier
++.B lock
++is not used, an application may nevertheless overwrite the suggested congestion
++control algorithm for that destination. If the modifier
++.B lock
++is used, then an application is not allowed to overwrite the specified congestion
++control algorithm for that destination, thus it will be enforced/guaranteed to
++use the proposed algorithm.
++
++.TP
+ .BI advmss " NUMBER " "(2.3.15+ only)"
+ the MSS ('Maximal Segment Size') to advertise to these
+-destinations when establishing TCP connections. If it is not given,
++destinations when establishing TCP connections. If it is not given,
+ Linux uses a default value calculated from the first hop device MTU.
+ (If the path to these destination is asymmetric, this guess may be wrong.)
+
+@@ -498,7 +515,7 @@ If the routing protocol ID is not given,
+ .B ip assumes protocol
+ .B boot
+ (i.e. it assumes the route was added by someone who doesn't
+-understand what they are doing). Several protocol values have
++understand what they are doing). Several protocol values have
+ a fixed interpretation.
+ Namely:
+
+@@ -547,7 +564,7 @@ but their semantics are a bit different.
+
+ Key values
+ .RB "(" to ", " tos ", " preference " and " table ")"
+-select the route to delete. If optional attributes are present,
++select the route to delete. If optional attributes are present,
+ .B ip
+ verifies that they coincide with the attributes of the route to delete.
+ If no route with the given key and attributes was found,
+@@ -604,7 +621,7 @@ only select routes with the given TOS.
+
+ .TP
+ .BI table " TABLEID"
+-show the routes from this table(s). The default setting is to show table
++show the routes from this table(s). The default setting is to show table
+ .BR main "."
+ .I TABLEID
+ may either be the ID of a real table or one of the special values:
+@@ -678,7 +695,7 @@ this command flushes routes selected by some criteria.
+ .sp
+ The arguments have the same syntax and semantics as the arguments of
+ .BR "ip route show" ,
+-but routing tables are not listed but purged. The only difference is
++but routing tables are not listed but purged. The only difference is
+ the default action:
+ .B show
+ dumps all the IP main routing table but
+@@ -740,7 +757,7 @@ Note that this operation is not equivalent to
+ .B show
+ shows existing routes.
+ .B get
+-resolves them and creates new clones if necessary. Essentially,
++resolves them and creates new clones if necessary. Essentially,
+ .B get
+ is equivalent to sending a packet along this path.
+ If the
+@@ -750,7 +767,7 @@ to output packets towards the requested destination.
+ This is equivalent to pinging the destination
+ with a subsequent
+ .BR "ip route ls cache" ,
+-however, no packets are actually sent. With the
++however, no packets are actually sent. With the
+ .B iif
+ argument, the kernel pretends that a packet arrived from this interface
+ and searches for a path to forward the packet.
+@@ -774,8 +791,8 @@ This command expects to read a data stream as returned from
+ .BR "ip route save" .
+ It will attempt to restore the routing table information exactly as
+ it was at the time of the save, so any translation of information
+-in the stream (such as device indexes) must be done first. Any existing
+-routes are left unchanged. Any routes specified in the data stream that
++in the stream (such as device indexes) must be done first. Any existing
++routes are left unchanged. Any routes specified in the data stream that
+ already exist in the table will be ignored.
+ .RE
+
+diff --git a/man/man8/ip-rule.8 b/man/man8/ip-rule.8
+index 62df3b0..dd925be 100644
+--- a/man/man8/ip-rule.8
++++ b/man/man8/ip-rule.8
+@@ -86,7 +86,7 @@ and an
+ The RPDB is scanned in order of decreasing priority. The selector
+ of each rule is applied to {source address, destination address, incoming
+ interface, tos, fwmark} and, if the selector matches the packet,
+-the action is performed. The action predicate may return with success.
++the action is performed. The action predicate may return with success.
+ In this case, it will either give a route or failure indication
+ and the RPDB lookup is terminated. Otherwise, the RPDB program
+ continues with the next rule.
+@@ -131,18 +131,18 @@ table
+ (ID 253).
+ The
+ .B default
+-table is empty. It is reserved for some post-processing if no previous
++table is empty. It is reserved for some post-processing if no previous
+ default rules selected the packet.
+ This rule may also be deleted.
+
+ .P
+ Each RPDB entry has additional
+-attributes. F.e. each rule has a pointer to some routing
+-table. NAT and masquerading rules have an attribute to select new IP
+-address to translate/masquerade. Besides that, rules have some
++attributes. F.e. each rule has a pointer to some routing
++table. NAT and masquerading rules have an attribute to select new IP
++address to translate/masquerade. Besides that, rules have some
+ optional attributes, which routes have, namely
+ .BR "realms" .
+-These values do not override those contained in the routing tables. They
++These values do not override those contained in the routing tables. They
+ are only used if the route did not select any attributes.
+
+ .sp
+@@ -175,7 +175,7 @@ of the IP packet into some other value.
+ .RS
+ .TP
+ .BI type " TYPE " (default)
+-the type of this rule. The list of valid types was given in the previous
++the type of this rule. The list of valid types was given in the previous
+ subsection.
+
+ .TP
+@@ -188,14 +188,14 @@ select the destination prefix to match.
+
+ .TP
+ .BI iif " NAME"
+-select the incoming device to match. If the interface is loopback,
+-the rule only matches packets originating from this host. This means
++select the incoming device to match. If the interface is loopback,
++the rule only matches packets originating from this host. This means
+ that you may create separate routing tables for forwarded and local
+ packets and, hence, completely segregate them.
+
+ .TP
+ .BI oif " NAME"
+-select the outgoing device to match. The outgoing interface is only
++select the outgoing device to match. The outgoing interface is only
+ available for packets originating from local sockets that are bound to
+ a device.
+
+@@ -213,7 +213,7 @@ value to match.
+
+ .TP
+ .BI priority " PREFERENCE"
+-the priority of this rule. Each rule should have an explicitly
++the priority of this rule. Each rule should have an explicitly
+ set
+ .I unique
+ priority value.
+@@ -236,7 +236,7 @@ group GROUP.
+ .TP
+ .BI realms " FROM/TO"
+ Realms to select if the rule matched and the routing table lookup
+-succeeded. Realm
++succeeded. Realm
+ .I TO
+ is only used if the route did not select any realm.
+
+@@ -253,7 +253,7 @@ Using map-to instead of nat means the same thing.
+
+ .B Warning:
+ Changes to the RPDB made with these commands do not become active
+-immediately. It is assumed that after a script finishes a batch of
++immediately. It is assumed that after a script finishes a batch of
+ updates, it flushes the routing cache with
+ .BR "ip route flush cache" .
+ .RE
+diff --git a/man/man8/ip-tunnel.8 b/man/man8/ip-tunnel.8
+index fc2d6bd..c97c28c 100644
+--- a/man/man8/ip-tunnel.8
++++ b/man/man8/ip-tunnel.8
+@@ -86,7 +86,7 @@ objects are tunnels, encapsulating packets in IP packets and then
+ sending them over the IP infrastructure.
+ The encapsulating (or outer) address family is specified by the
+ .B -f
+-option. The default is IPv4.
++option. The default is IPv4.
+
+ .TP
+ .B ip tunnel add
+@@ -168,7 +168,7 @@ changes.
+ .TP
+ .B nopmtudisc
+ disable Path MTU Discovery on this tunnel.
+-It is enabled by default. Note that a fixed ttl is incompatible
++It is enabled by default. Note that a fixed ttl is incompatible
+ with this option: tunneling with a fixed ttl always makes pmtu
+ discovery.
+
+@@ -199,7 +199,7 @@ flag calculates checksums for outgoing packets.
+ The
+ .B icsum
+ flag requires that all input packets have the correct
+-checksum. The
++checksum. The
+ .B csum
+ flag is equivalent to the combination
+ .BR "icsum ocsum" .
+@@ -223,7 +223,7 @@ flag is equivalent to the combination
+ .TP
+ .BI encaplim " ELIM"
+ .RB ( " only IPv6 tunnels " )
+-set a fixed encapsulation limit. Default is 4.
++set a fixed encapsulation limit. Default is 4.
+
+ .TP
+ .BI flowlabel " FLOWLABEL"
+diff --git a/man/man8/ip.8 b/man/man8/ip.8
+index 016e8c6..4cd71de 100644
+--- a/man/man8/ip.8
++++ b/man/man8/ip.8
+@@ -56,7 +56,7 @@ If there were any errors during execution of the commands, the application retur
+
+ .TP
+ .BR "\-s" , " \-stats" , " \-statistics"
+-Output more information. If the option
++Output more information. If the option
+ appears twice or more, the amount of information increases.
+ As a rule, the information is statistics or some time values.
+
+@@ -67,7 +67,7 @@ Output more detailed information.
+ .TP
+ .BR "\-l" , " \-loops " <COUNT>
+ Specify maximum number of loops the 'ip addr flush' logic
+-will attempt before giving up. The default is 10.
++will attempt before giving up. The default is 10.
+ Zero (0) means loop until all addresses are removed.
+
+ .TP
+@@ -77,7 +77,7 @@ Specifies the protocol family to use. The protocol family identifier can be one
+ or
+ .BR link .
+ If this option is not present,
+-the protocol family is guessed from other arguments. If the rest
++the protocol family is guessed from other arguments. If the rest
+ of the command line does not give enough information to guess the
+ family,
+ .B ip
+@@ -254,9 +254,9 @@ and
+ (or
+ .B list
+ ) objects, but some objects do not allow all of these operations
+-or have some additional commands. The
++or have some additional commands. The
+ .B help
+-command is available for all objects. It prints
++command is available for all objects. It prints
+ out a list of available commands and argument syntax conventions.
+ .sp
+ If no command is given, some default command is assumed.
+diff --git a/man/man8/rtmon.8 b/man/man8/rtmon.8
+index c9359d8..0538752 100644
+--- a/man/man8/rtmon.8
++++ b/man/man8/rtmon.8
+@@ -34,7 +34,7 @@ Show summary of options.
+ .TP
+ .B file FILE [ all | LISTofOBJECTS ]
+ Log output to FILE. LISTofOBJECTS is the list of object types that we
+-want to monitor. It may contain 'link', 'address', 'route'
++want to monitor. It may contain 'link', 'address', 'route'
+ and 'all'. 'link' specifies the network device, 'address' the protocol
+ (IP or IPv6) address on a device, 'route' the routing table entry
+ and 'all' does what the name says.
+diff --git a/man/man8/ss.8 b/man/man8/ss.8
+index 450649a..b7fbaef 100644
+--- a/man/man8/ss.8
++++ b/man/man8/ss.8
+@@ -84,6 +84,9 @@ context of the creating process, however the context shown will reflect
+ any policy role, type and/or range transition rules applied,
+ and is therefore a useful reference.
+ .TP
++.B \-N NSNAME, \-\-net=NSNAME
++Switch to the specified network namespace name.
++.TP
+ .B \-b, \-\-bpf
+ Show socket BPF filters (only administrators are allowed to get these information).
+ .TP
+diff --git a/man/man8/tc-cbq-details.8 b/man/man8/tc-cbq-details.8
+index f43dca8..ddaf3ca 100644
+--- a/man/man8/tc-cbq-details.8
++++ b/man/man8/tc-cbq-details.8
+@@ -58,8 +58,8 @@ interval timeconstant
+
+ .SH DESCRIPTION
+ Class Based Queueing is a classful qdisc that implements a rich
+-linksharing hierarchy of classes. It contains shaping elements as
+-well as prioritizing capabilities. Shaping is performed using link
++linksharing hierarchy of classes. It contains shaping elements as
++well as prioritizing capabilities. Shaping is performed using link
+ idle time calculations based on the timing of dequeue events and
+ underlying link bandwidth.
+
+diff --git a/man/man8/tc-cbq.8 b/man/man8/tc-cbq.8
+index 4b371a0..b900e1c 100644
+--- a/man/man8/tc-cbq.8
++++ b/man/man8/tc-cbq.8
+@@ -60,8 +60,8 @@ interval timeconstant
+
+ .SH DESCRIPTION
+ Class Based Queueing is a classful qdisc that implements a rich
+-linksharing hierarchy of classes. It contains shaping elements as
+-well as prioritizing capabilities. Shaping is performed using link
++linksharing hierarchy of classes. It contains shaping elements as
++well as prioritizing capabilities. Shaping is performed using link
+ idle time calculations based on the timing of dequeue events and
+ underlying link bandwidth.
+
+diff --git a/man/man8/tc-choke.8 b/man/man8/tc-choke.8
+index 9d1081f..1916a3d 100644
+--- a/man/man8/tc-choke.8
++++ b/man/man8/tc-choke.8
+@@ -22,12 +22,12 @@ chance
+
+ CHOKe (CHOose and Keep for responsive flows, CHOose and Kill for unresponsive flows)
+ is a classless qdisc designed to both identify and penalize flows that monopolize the
+-queue. CHOKe is a variation of RED, and the configuration is similar to RED.
++queue. CHOKe is a variation of RED, and the configuration is similar to RED.
+
+ .SH ALGORITHM
+ Once the queue hits a certain average length, a random packet is drawn from the
+-queue. If both the to-be-queued and the drawn packet belong to the same flow,
+-both packets are dropped. Otherwise, if the queue length is still below the maximum length,
++queue. If both the to-be-queued and the drawn packet belong to the same flow,
++both packets are dropped. Otherwise, if the queue length is still below the maximum length,
+ the new packet has a configurable chance of being marked (which may mean dropped).
+ If the queue length exceeds
+ .BR max ,
+diff --git a/man/man8/tc-codel.8 b/man/man8/tc-codel.8
+index 61f163f..a0e50a4 100644
+--- a/man/man8/tc-codel.8
++++ b/man/man8/tc-codel.8
+@@ -69,10 +69,10 @@ is used to ensure that the measured minimum delay does not become too stale. The
+ minimum delay must be experienced in the last epoch of length
+ .B interval.
+ It should be set on the order of the worst-case RTT through the bottleneck to
+-give endpoints sufficient time to react. Default value is 100ms.
++give endpoints sufficient time to react. Default value is 100ms.
+
+ .SS ecn | noecn
+-can be used to mark packets instead of dropping them. If
++can be used to mark packets instead of dropping them. If
+ .B ecn
+ has been enabled,
+ .B noecn
+diff --git a/man/man8/tc-drr.8 b/man/man8/tc-drr.8
+index 29daed8..f550a35 100644
+--- a/man/man8/tc-drr.8
++++ b/man/man8/tc-drr.8
+@@ -23,9 +23,9 @@ Each class is assigned a deficit counter, initialized to
+ .B quantum.
+
+ DRR maintains an (internal) ''active'' list of classes whose qdiscs are
+-non-empty. This list is used for dequeuing. A packet is dequeued from
++non-empty. This list is used for dequeuing. A packet is dequeued from
+ the class at the head of the list if the packet size is smaller or equal
+-to the deficit counter. If the counter is too small, it is increased by
++to the deficit counter. If the counter is too small, it is increased by
+ .B quantum
+ and the scheduler moves on to the next class in the active list.
+
+@@ -34,7 +34,7 @@ and the scheduler moves on to the next class in the active list.
+ .TP
+ quantum
+ Amount of bytes a flow is allowed to dequeue before the scheduler moves to
+-the next class. Defaults to the MTU of the interface. The minimum value is 1.
++the next class. Defaults to the MTU of the interface. The minimum value is 1.
+
+ .SH EXAMPLE & USAGE
+
+@@ -54,9 +54,9 @@ You also need to add at least one filter to classify packets.
+ .P
+
+ Like SFQ, DRR is only useful when it owns the queue \-\- it is a pure scheduler and does
+-not delay packets. Attaching non-work-conserving qdiscs like tbf to it does not make
++not delay packets. Attaching non-work-conserving qdiscs like tbf to it does not make
+ sense \-\- other qdiscs in the active list will also become inactive until the dequeue
+-operation succeeds. Embed DRR within another qdisc like HTB or HFSC to ensure it owns the queue.
++operation succeeds. Embed DRR within another qdisc like HTB or HFSC to ensure it owns the queue.
+ .P
+ You can mimic SFQ behavior by assigning packets to the attached classes using the
+ flow filter:
+diff --git a/man/man8/tc-fq_codel.8 b/man/man8/tc-fq_codel.8
+index adeacd6..a80389a 100644
+--- a/man/man8/tc-fq_codel.8
++++ b/man/man8/tc-fq_codel.8
+@@ -47,7 +47,7 @@ has the same semantics as
+ .B codel
+ and is the acceptable minimum
+ standing/persistent queue delay. This minimum delay is identified by tracking
+-the local minimum queue delay that packets experience. Default value is 5ms.
++the local minimum queue delay that packets experience. Default value is 5ms.
+
+ .SS interval
+ has the same semantics as
+@@ -55,7 +55,7 @@ has the same semantics as
+ and is used to ensure that the measured minimum delay does not become too stale.
+ The minimum delay must be experienced in the last epoch of length .B interval.
+ It should be set on the order of the worst-case RTT through the bottleneck to
+-give endpoints sufficient time to react. Default value is 100ms.
++give endpoints sufficient time to react. Default value is 100ms.
+
+ .SS quantum
+ is the number of bytes used as 'deficit' in the fair queuing algorithm. Default
+@@ -65,7 +65,7 @@ header length of 14 bytes.
+ .SS ecn | noecn
+ has the same semantics as
+ .B codel
+-and can be used to mark packets instead of dropping them. If
++and can be used to mark packets instead of dropping them. If
+ .B ecn
+ has been enabled,
+ .B noecn
+diff --git a/man/man8/tc-hfsc.8 b/man/man8/tc-hfsc.8
+index c5ff331..5444118 100644
+--- a/man/man8/tc-hfsc.8
++++ b/man/man8/tc-hfsc.8
+@@ -32,7 +32,7 @@ For description of BYTE, BPS and SEC \- please see \fBUNITS\fR
+ section of \fBtc\fR(8).
+ .
+ .SH DESCRIPTION (qdisc)
+-HFSC qdisc has only one optional parameter \- \fBdefault\fR. CLASSID specifies
++HFSC qdisc has only one optional parameter \- \fBdefault\fR. CLASSID specifies
+ the minor part of the default classid, where packets not classified by other
+ means (e.g. u32 filter, CLASSIFY target of iptables) will be enqueued. If
+ \fBdefault\fR is not specified, unclassified packets will be dropped.
+diff --git a/man/man8/tc-netem.8 b/man/man8/tc-netem.8
+index b0b7864..53c4de9 100644
+--- a/man/man8/tc-netem.8
++++ b/man/man8/tc-netem.8
+@@ -151,7 +151,7 @@ header compression scheme. The third parameter - an unsigned value - specify
+ the cellsize. Cellsize can be used to simulate link layer schemes. ATM for
+ example has an payload cellsize of 48 bytes and 5 byte per cell header. If a
+ packet is 50 byte then ATM must use two cells: 2 * 48 bytes payload including 2
+-* 5 byte header, thus consume 106 byte on the wire. The last optional value
++* 5 byte header, thus consume 106 byte on the wire. The last optional value
+ .I CELLOVERHEAD
+ can be used to specify per cell overhead - for our ATM example 5.
+ .I CELLOVERHEAD
+diff --git a/man/man8/tc-pie.8 b/man/man8/tc-pie.8
+index 536c381..278293b 100644
+--- a/man/man8/tc-pie.8
++++ b/man/man8/tc-pie.8
+@@ -49,7 +49,7 @@ the deviation between the current and target latency changes probability. beta e
+ additional adjustments depending on the latency trend.
+
+ The drop probabilty is used to mark packets in ecn mode. However, as in RED,
+-beyond 10% packets are dropped based on this probability. The bytemode is used
++beyond 10% packets are dropped based on this probability. The bytemode is used
+ to drop packets proportional to the packet size.
+
+ Additional details can be found in the paper cited below.
+diff --git a/man/man8/tc-red.8 b/man/man8/tc-red.8
+index f410d15..d001c49 100644
+--- a/man/man8/tc-red.8
++++ b/man/man8/tc-red.8
+@@ -112,7 +112,7 @@ ecn
+ As mentioned before, RED can either 'mark' or 'drop'. Explicit Congestion
+ Notification allows RED to notify remote hosts that their rate exceeds the
+ amount of bandwidth available. Non-ECN capable hosts can only be notified by
+-dropping a packet. If this parameter is specified, packets which indicate
++dropping a packet. If this parameter is specified, packets which indicate
+ that their hosts honor ECN will only be marked and not dropped, unless the
+ queue size hits
+ .B limit
+@@ -156,7 +156,7 @@ Adaptive RED : http://icir.org/floyd/papers/adaptiveRed.pdf
+ .SH AUTHORS
+ Alexey N. Kuznetsov, <kuznet at ms2.inr.ac.ru>, Alexey Makarenko
+ <makar at phoenix.kharkov.ua>, J Hadi Salim <hadi at nortelnetworks.com>,
+-Eric Dumazet <eric.dumazet at gmail.com>.
++Eric Dumazet <eric.dumazet at gmail.com>.
+ This manpage maintained by bert hubert <ahu at ds9a.nl>
+
+
+diff --git a/man/man8/tc-sfb.8 b/man/man8/tc-sfb.8
+index e7634d2..aad19e1 100644
+--- a/man/man8/tc-sfb.8
++++ b/man/man8/tc-sfb.8
+@@ -35,7 +35,7 @@ tries to determine the ideal marking probability automatically.
+ The
+ .B BLUE
+ algorithm maintains a probability which is used to mark or drop packets
+-that are to be queued. If the queue overflows, the mark/drop probability
++that are to be queued. If the queue overflows, the mark/drop probability
+ is increased. If the queue becomes empty, the probability is decreased. The
+ .B Stochastic Fair Blue
+ (SFB) algorithm is designed to protect TCP flows against non-responsive flows.
+@@ -44,8 +44,8 @@ This SFB implementation maintains 8 levels of 16 bins each for accounting.
+ Each flow is mapped into a bin of each level using a per-level hash value.
+
+ Every bin maintains a marking probability, which gets increased or decreased
+-based on bin occupancy. If the number of packets exceeds the size of that
+-bin, the marking probability is increased. If the number drops to zero, it
++based on bin occupancy. If the number of packets exceeds the size of that
++bin, the marking probability is increased. If the number drops to zero, it
+ is decreased.
+
+ The marking probability is based on the minimum value of all bins a flow is
+@@ -63,7 +63,7 @@ with a non-responsive flow, causing the responsive flow to be misidentified as
+ being non-responsive.
+
+ The probability of a responsive flow to be misidentified is dependent on
+-the number of non-responsive flows, M. It is (1 - (1 - (1 / 16.0)) ** M) **8,
++the number of non-responsive flows, M. It is (1 - (1 - (1 / 16.0)) ** M) **8,
+ so for example with 10 non-responsive flows approximately 0.2% of responsive flows
+ will be misidentified.
+
+@@ -89,7 +89,7 @@ implementation maintains a second set of levels/bins as described in section
+ 4.4 of the SFB reference.
+ While one set is used to manage the queue, a second set is warmed up:
+ Whenever a flow is then determined to be non-responsive, the marking
+-probabilities in the second set are updated. When the rehashing
++probabilities in the second set are updated. When the rehashing
+ happens, these bins will be used to manage the queue and all non-responsive
+ flows can be rate-limited immediately.
+ This value determines how much time has to pass before the 2nd set
+@@ -100,19 +100,19 @@ rehash.
+ .TP
+ limit
+ Hard limit on the real (not average) total queue size in packets.
+-Further packets are dropped. Defaults to the transmit queue length of the
++Further packets are dropped. Defaults to the transmit queue length of the
+ device the qdisc is attached to.
+ .TP
+ max
+ Maximum length of a buckets queue, in packets, before packets start being
+-dropped. Should be sightly larger than
++dropped. Should be sightly larger than
+ .B target
+ , but should not be set to values exceeding 1.5 times that of
+ .B target .
+ Defaults to 25.
+ .TP
+ target
+-The desired average bin length. If the bin queue length reaches this value,
++The desired average bin length. If the bin queue length reaches this value,
+ the marking probability is increased by
+ .B increment.
+ The default value depends on the
+@@ -123,11 +123,11 @@ will default to 20.
+ .TP
+ increment
+ A value used to increase the marking probability when the queue appears
+-to be over-used. Must be between 0 and 1.0. Defaults to 0.00050.
++to be over-used. Must be between 0 and 1.0. Defaults to 0.00050.
+ .TP
+ decrement
+ Value used to decrease the marking probability when the queue is found
+-to be empty. Must be between 0 and 1.0.
++to be empty. Must be between 0 and 1.0.
+ Defaults to 0.00005.
+ .TP
+ penalty_rate
+@@ -153,7 +153,7 @@ The number of packets dropped before a per-flow queue was full.
+ ratedrop
+ The number of packets dropped because of rate-limiting.
+ If this value is high, there are many non-reactive flows being
+-sent through sfb. In such cases, it might be better to
++sent through sfb. In such cases, it might be better to
+ embed sfb within a classful qdisc to better control such
+ flows using a different, shaping qdisc.
+ .TP
+@@ -163,7 +163,7 @@ High bucketdrop may point to a high number of aggressive, short-lived
+ flows.
+ .TP
+ queuedrop
+-The number of packets dropped due to reaching limit. This should normally be 0.
++The number of packets dropped due to reaching limit. This should normally be 0.
+ .TP
+ marked
+ The number of packets marked with ECN.
+@@ -172,7 +172,7 @@ maxqlen
+ The length of the current longest per-flow (virtual) queue.
+ .TP
+ maxprob
+-The maximum per-flow drop probability. 1 means that some
++The maximum per-flow drop probability. 1 means that some
+ flows have been detected as non-reactive.
+
+ .SH NOTES
+diff --git a/man/man8/tc-sfq.8 b/man/man8/tc-sfq.8
+index 5a651ff..9afb5b2 100644
+--- a/man/man8/tc-sfq.8
++++ b/man/man8/tc-sfq.8
+@@ -150,7 +150,7 @@ ecn
+ RED can either 'mark' or 'drop'. Explicit Congestion
+ Notification allows RED to notify remote hosts that their rate exceeds the
+ amount of bandwidth available. Non-ECN capable hosts can only be notified by
+-dropping a packet. If this parameter is specified, packets which indicate
++dropping a packet. If this parameter is specified, packets which indicate
+ that their hosts honor ECN will only be marked and not dropped, unless the
+ queue size hits
+ .B depth
+diff --git a/man/man8/tc-tbf.8 b/man/man8/tc-tbf.8
+index 18ef7b4..fc2c837 100644
+--- a/man/man8/tc-tbf.8
++++ b/man/man8/tc-tbf.8
+@@ -102,7 +102,7 @@ Furthermore, if a peakrate is desired, the following parameters are available:
+
+ .TP
+ peakrate
+-Maximum depletion rate of the bucket. The peakrate does not
++Maximum depletion rate of the bucket. The peakrate does not
+ need to be set, it is only necessary if perfect millisecond timescale
+ shaping is required.
+
+diff --git a/man/man8/tc.8 b/man/man8/tc.8
+index a6aed0a..ea4d445 100644
+--- a/man/man8/tc.8
++++ b/man/man8/tc.8
+@@ -250,23 +250,33 @@ attached to that class. Check qdisc specific manpages for details, however.
+ All qdiscs, classes and filters have IDs, which can either be specified
+ or be automatically assigned.
+
+-IDs consist of a major number and a minor number, separated by a colon.
+-Both major and minor number are limited to 16 bits. There are two special
+-values: root is signified by major and minor of all ones, and unspecified
+-is all zeros.
++IDs consist of a
++.BR major " number and a " minor
++number, separated by a colon -
++.BR major ":" minor "."
++Both
++.BR major " and " minor
++are hexadecimal numbers and are limited to 16 bits. There are two special
++values: root is signified by
++.BR major " and " minor
++of all ones, and unspecified is all zeros.
+
+ .TP
+ QDISCS
+-A qdisc, which potentially can have children,
+-gets assigned a major number, called a 'handle', leaving the minor
++A qdisc, which potentially can have children, gets assigned a
++.B major
++number, called a 'handle', leaving the
++.B minor
+ number namespace available for classes. The handle is expressed as '10:'.
+-It is customary to explicitly assign a handle to qdiscs expected to have
+-children.
++It is customary to explicitly assign a handle to qdiscs expected to have children.
+
+ .TP
+ CLASSES
+-Classes residing under a qdisc share their qdisc major number, but each have
+-a separate minor number called a 'classid' that has no relation to their
++Classes residing under a qdisc share their qdisc
++.B major
++number, but each have a separate
++.B minor
++number called a 'classid' that has no relation to their
+ parent classes, only to their parent qdisc. The same naming custom as for
+ qdiscs applies.
+
diff --git a/iproute2-3.19.0-docs.patch b/iproute2-3.19.0-docs.patch
new file mode 100644
index 0000000..6523198
--- /dev/null
+++ b/iproute2-3.19.0-docs.patch
@@ -0,0 +1,643 @@
+From 040b1593cf1fe8ff51d55e1e7a1ace8631fbbad9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Thu, 2 Apr 2015 15:53:11 +0200
+Subject: [PATCH 1/7] docs: improve manual pages and help
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Commit 43d29f7 substantially improves generated ip-address.8 instead of
+ip-address.8.in and commit e419f2d removes the generated one losing the
+improvements entirely. This commit recovers the lost changes, adapts
+them to the current manual page and adds more man page and help
+improvements.
+
+Based on previous work by:
+
+ * Kenyon Ralph <kenyon at kenyonralph.com>
+
+ip link:
+
+ * Add VLAN documentation.
+ * Fix srcport/dstport in VXLAN documentation.
+
+ip address:
+
+ * Improve manual page synopsis and built-it help.
+ * Use full subcommand names (e.g. 'address' and 'maddress').
+ * Specify when IPv4, IPv6 or both are affected.
+ * Add lifetimes, home and nodad.
+ * Reduce left over double spaces.
+
+ip route:
+
+ * Prefer 'show' over 'list' for consistency.
+
+ip rule:
+
+ * Remove false statement about Rule 0.
+
+ip tunnel:
+
+ * Improve manual page synopsis and built-it help.
+
+ifcfg:
+
+ * Add manual page.
+
+bridge fdb:
+
+ * Fix fdb synopsis.
+
+tc qdisc:
+
+ * Add cbq manual page alias.
+
+Changes (ss):
+
+ * Turn Debian specific statement into a general one.
+ * Refer to .ps docs instead of .html.
+
+See also:
+
+ * https://bugzilla.redhat.com/show_bug.cgi?id=1072441
+ * https://bugzilla.redhat.com/show_bug.cgi?id=1075692
+ * https://bugzilla.redhat.com/show_bug.cgi?id=1077191
+ * https://bugzilla.redhat.com/show_bug.cgi?id=1105438
+ * https://bugzilla.redhat.com/show_bug.cgi?id=1121261
+
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ bridge/fdb.c | 8 ++--
+ doc/ip-cref.tex | 3 --
+ ip/ip.c | 4 +-
+ ip/ipaddress.c | 16 +++----
+ man/man8/bridge.8 | 6 +--
+ man/man8/cbq.8 | 1 +
+ man/man8/ifcfg.8 | 57 ++++++++++++++++++++++
+ man/man8/ip-address.8.in | 120 ++++++++++++++++++++++++++++++++++++-----------
+ man/man8/ip-link.8.in | 25 +++++++++-
+ man/man8/ip-route.8.in | 2 +-
+ man/man8/ip-rule.8 | 2 -
+ man/man8/ip-tunnel.8 | 6 +--
+ man/man8/ip.8 | 6 +--
+ man/man8/ss.8 | 4 +-
+ 14 files changed, 200 insertions(+), 60 deletions(-)
+ create mode 100644 man/man8/cbq.8
+ create mode 100644 man/man8/ifcfg.8
+
+diff --git a/bridge/fdb.c b/bridge/fdb.c
+index 3c33e22..1fec09a 100644
+--- a/bridge/fdb.c
++++ b/bridge/fdb.c
+@@ -31,10 +31,10 @@ static unsigned int filter_index;
+
+ static void usage(void)
+ {
+- fprintf(stderr, "Usage: bridge fdb { add | append | del | replace } ADDR dev DEV {self|master} [ temp ]\n"
+- " [router] [ dst IPADDR] [ vlan VID ]\n"
+- " [ port PORT] [ vni VNI ] [via DEV]\n");
+- fprintf(stderr, " bridge fdb {show} [ br BRDEV ] [ brport DEV ]\n");
++ fprintf(stderr, "Usage: bridge fdb { add | append | del } LLADDR dev DEV { local | temp }\n"
++ " [ self ] [ embedded ] [ router ] [ dst IPADDR ]\n"
++ " [ vni VNI ] [ port PORT ] [ via DEVICE ]\n");
++ fprintf(stderr, " bridge fdb show [ br BRDEV ] [ brport DEV ]\n");
+ exit(-1);
+ }
+
+diff --git a/doc/ip-cref.tex b/doc/ip-cref.tex
+index e7a79a5..c938a2f 100644
+--- a/doc/ip-cref.tex
++++ b/doc/ip-cref.tex
+@@ -2038,9 +2038,6 @@ table \verb|local| (ID 255).
+ The \verb|local| table is a special routing table containing
+ high priority control routes for local and broadcast addresses.
+
+-Rule 0 is special. It cannot be deleted or overridden.
+-
+-
+ \item Priority: 32766, Selector: match anything, Action: lookup routing
+ table \verb|main| (ID 254).
+ The \verb|main| table is the normal routing table containing all non-policy
+diff --git a/ip/ip.c b/ip/ip.c
+index da16b15..cba43ca 100644
+--- a/ip/ip.c
++++ b/ip/ip.c
+@@ -47,8 +47,8 @@ static void usage(void)
+ fprintf(stderr,
+ "Usage: ip [ OPTIONS ] OBJECT { COMMAND | help }\n"
+ " ip [ -force ] -batch filename\n"
+-"where OBJECT := { link | addr | addrlabel | route | rule | neigh | ntable |\n"
+-" tunnel | tuntap | maddr | mroute | mrule | monitor | xfrm |\n"
++"where OBJECT := { link | address | addrlabel | route | rule | neighbor | ntable |\n"
++" tunnel | tuntap | maddress | mroute | mrule | monitor | xfrm |\n"
+ " netns | l2tp | fou | tcp_metrics | token | netconf }\n"
+ " OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |\n"
+ " -h[uman-readable] | -iec |\n"
+diff --git a/ip/ipaddress.c b/ip/ipaddress.c
+index 99a6ab5..dc31515 100644
+--- a/ip/ipaddress.c
++++ b/ip/ipaddress.c
+@@ -70,15 +70,15 @@ static void usage(void)
+ if (do_link) {
+ iplink_usage();
+ }
+- fprintf(stderr, "Usage: ip addr {add|change|replace} IFADDR dev STRING [ LIFETIME ]\n");
++ fprintf(stderr, "Usage: ip address {add|change|replace} IFADDR dev IFNAME [ LIFETIME ]\n");
+ fprintf(stderr, " [ CONFFLAG-LIST ]\n");
+- fprintf(stderr, " ip addr del IFADDR dev STRING [mngtmpaddr]\n");
+- fprintf(stderr, " ip addr {show|save|flush} [ dev STRING ] [ scope SCOPE-ID ]\n");
+- fprintf(stderr, " [ to PREFIX ] [ FLAG-LIST ] [ label PATTERN ] [up]\n");
+- fprintf(stderr, " ip addr {showdump|restore}\n");
++ fprintf(stderr, " ip address del IFADDR dev IFNAME [mngtmpaddr]\n");
++ fprintf(stderr, " ip address {show|save|flush} [ dev IFNAME ] [ scope SCOPE-ID ]\n");
++ fprintf(stderr, " [ to PREFIX ] [ FLAG-LIST ] [ label LABEL ] [up]\n");
++ fprintf(stderr, " ip address {showdump|restore}\n");
+ fprintf(stderr, "IFADDR := PREFIX | ADDR peer PREFIX\n");
+ fprintf(stderr, " [ broadcast ADDR ] [ anycast ADDR ]\n");
+- fprintf(stderr, " [ label STRING ] [ scope SCOPE-ID ]\n");
++ fprintf(stderr, " [ label IFNAME ] [ scope SCOPE-ID ]\n");
+ fprintf(stderr, "SCOPE-ID := [ host | link | global | NUMBER ]\n");
+ fprintf(stderr, "FLAG-LIST := [ FLAG-LIST ] FLAG\n");
+ fprintf(stderr, "FLAG := [ permanent | dynamic | secondary | primary |\n");
+@@ -1059,7 +1059,7 @@ static int ipadd_dump_check_magic(void)
+ __u32 magic = 0;
+
+ if (isatty(STDIN_FILENO)) {
+- fprintf(stderr, "Can't restore addr dump from a terminal\n");
++ fprintf(stderr, "Can't restore address dump from a terminal\n");
+ return -1;
+ }
+
+@@ -1787,6 +1787,6 @@ int do_ipaddr(int argc, char **argv)
+ return ipaddr_restore();
+ if (matches(*argv, "help") == 0)
+ usage();
+- fprintf(stderr, "Command \"%s\" is unknown, try \"ip addr help\".\n", *argv);
++ fprintf(stderr, "Command \"%s\" is unknown, try \"ip address help\".\n", *argv);
+ exit(-1);
+ }
+diff --git a/man/man8/bridge.8 b/man/man8/bridge.8
+index 4135d01..fd7e1d8 100644
+--- a/man/man8/bridge.8
++++ b/man/man8/bridge.8
+@@ -53,8 +53,8 @@ bridge \- show / manipulate bridge addresses and devices
+ .I LLADDR
+ .B dev
+ .IR DEV " { "
+-.BR local " | " temp " } { "
+-.BR self " } { " router " } [ "
++.BR local " | " temp " } [ "
++.BR self " ] [ " router " ] [ "
+ .B dst
+ .IR IPADDR " ] [ "
+ .B vni
+@@ -65,7 +65,7 @@ bridge \- show / manipulate bridge addresses and devices
+ .IR DEVICE " ]"
+
+ .ti -8
+-.BR "bridge fdb" " [ " show " ] [ "
++.BR "bridge fdb show" " [ "
+ .B dev
+ .IR DEV " ]"
+
+diff --git a/man/man8/cbq.8 b/man/man8/cbq.8
+new file mode 100644
+index 0000000..78940b6
+--- /dev/null
++++ b/man/man8/cbq.8
+@@ -0,0 +1 @@
++.so man8/tc-cbq.8
+\ No newline at end of file
+diff --git a/man/man8/ifcfg.8 b/man/man8/ifcfg.8
+new file mode 100644
+index 0000000..a6b585e
+--- /dev/null
++++ b/man/man8/ifcfg.8
+@@ -0,0 +1,57 @@
++.TH IFCFG 8 "September 24 2009" "iproute2" "Linux"
++.SH NAME
++ifcfg \- simplistic script which replaces ifconfig IP managment
++.SH SYNOPSIS
++.ad l
++.in +8
++.ti -8
++.B ifcfg
++.RI "[ " DEVICE " [ " :ALIAS: " ] ] [ " command " ] " ADDRESS " [ " LENGTH " ] [ " PEER " ] "
++.sp
++
++.SH DESCRIPTION
++This manual page documents briefly the
++.B ifcfg
++command.
++.PP
++This is a simplistic script replacing one option of
++.B ifconfig
++, namely, IP address management. It not only adds
++addresses, but also carries out Duplicate Address Detection RFC-DHCP,
++sends unsolicited ARP to update the caches of other hosts sharing
++the interface, adds some control routes and restarts Router Discovery
++when it is necessary.
++
++I strongly recommend using it
++.RI instead
++of
++.RI ifconfig
++both on hosts and on routers.
++
++.SH IFCONFIG - COMMAND SYNTAX
++
++.SS
++.TP
++.B DEVICE
++- it may have alias, suffix, separated by colon.
++
++.TP
++.B command
++- add, delete or stop.
++
++.TP
++.B address
++- optionally followed by prefix length.
++
++.TP
++.B peer
++- optional peer address for pointpoint interfaces.
++
++.SH EXAMPLE
++.nf ifcfg eth0 193.233.7.90/24
++.fi
++This function determines, whether this is router or host.
++It returns 0, if the host is apparently not router.
++
++.SH SEE ALSO
++.BR ip-cref.dvi
+diff --git a/man/man8/ip-address.8.in b/man/man8/ip-address.8.in
+index 6e46af8..4da3095 100644
+--- a/man/man8/ip-address.8.in
++++ b/man/man8/ip-address.8.in
+@@ -14,18 +14,26 @@ ip-address \- protocol address management
+ .sp
+
+ .ti -8
+-.BR "ip address" " { " add " | " del " } "
+-.IB IFADDR " dev " STRING
++.BR "ip address" " { " add " | " change " | " replace " } "
++.IB IFADDR " dev " IFNAME
++.RI "[ " LIFETIME " ] [ " CONFFLAG-LIST " ]"
+
+ .ti -8
+-.BR "ip address" " { " show " | " flush " } [ " dev
+-.IR STRING " ] [ "
++.BR "ip address del"
++.IB IFADDR " dev " IFNAME " [ " mngtmpaddr " ]"
++
++.ti -8
++.BR "ip address" " { " show " | " save " | " flush " } [ " dev
++.IR IFNAME " ] [ "
+ .B scope
+ .IR SCOPE-ID " ] [ "
+ .B to
+ .IR PREFIX " ] [ " FLAG-LIST " ] [ "
+ .B label
+-.IR PATTERN " ]"
++.IR PATTERN " ] [ " up " ]"
++
++.ti -8
++.BR "ip address" " { " showdump " | " restore " }"
+
+ .ti -8
+ .IR IFADDR " := " PREFIX " | " ADDR
+@@ -36,7 +44,7 @@ ip-address \- protocol address management
+ .B anycast
+ .IR ADDR " ] [ "
+ .B label
+-.IR STRING " ] [ "
++.IR LABEL " ] [ "
+ .B scope
+ .IR SCOPE-ID " ]"
+
+@@ -50,17 +58,34 @@ ip-address \- protocol address management
+
+ .ti -8
+ .IR FLAG " := "
+-.RB "[ " permanent " | " dynamic " | " secondary " | " primary " | \
+-[ - ] " tentative " | [ - ] " deprecated " | [ - ] " dadfailed " | "\
+-temporary " ]"
++.RB "[ " permanent " | " dynamic " | " secondary " | " primary " | "\
++tentative " | " deprecated " | " dadfailed " | " temporary " | " CONFFLAG-LIST " ]"
++
++.ti -8
++.IR CONFFLAG-LIST " := [ " CONFFLAG-LIST " ] " CONFFLAG
++
++.ti -8
++.IR CONFFLAG " := "
++.RB "[ " home " | " nodad " ]"
++
++.ti -8
++.IR LIFETIME " := [ "
++.BI valid_lft " LFT"
++.RB "| " preferred_lft
++.IR LFT " ]"
++
++.ti -8
++.IR LFT " := [ "
++.BR forever " |"
++.IR SECONDS " ]"
+
+ .SH "DESCRIPTION"
+ The
+ .B address
+-is a protocol (IP or IPv6) address attached
+-to a network device. Each device must have at least one address
+-to use the corresponding protocol. It is possible to have several
+-different addresses attached to one device. These addresses are not
++is a protocol (IPv4 or IPv6) address attached
++to a network device. Each device must have at least one address
++to use the corresponding protocol. It is possible to have several
++different addresses attached to one device. These addresses are not
+ discriminated, so that the term
+ .B alias
+ is not quite appropriate for them and we do not use it in this document.
+@@ -73,7 +98,7 @@ and deletes old ones.
+ .SS ip address add - add new protocol address.
+
+ .TP
+-.BI dev " NAME"
++.BI dev " IFNAME "
+ the name of the device to add the address to.
+
+ .TP
+@@ -107,7 +132,7 @@ instead of the broadcast address. In this case, the broadcast address
+ is derived by setting/resetting the host bits of the interface prefix.
+
+ .TP
+-.BI label " NAME"
++.BI label " LABEL"
+ Each address may be tagged with a label string.
+ In order to preserve compatibility with Linux-2.0 net aliases,
+ this string must coincide with the name of the device or must be prefixed
+@@ -125,7 +150,7 @@ Predefined scope values are:
+ - the address is globally valid.
+ .sp
+ .B site
+-- (IPv6 only) the address is site local, i.e. it is
++- (IPv6 only, deprecated) the address is site local, i.e. it is
+ valid inside this site.
+ .sp
+ .B link
+@@ -135,6 +160,30 @@ valid inside this site.
+ - the address is valid only inside this host.
+ .in -8
+
++.TP
++.BI valid_lft " LFT"
++the valid lifetime of this address; see section 5.5.4 of
++RFC 4862. When it expires, the address is removed by the kernel.
++Defaults to
++.BR "forever" .
++
++.TP
++.BI preferred_lft " LFT"
++the preferred lifetime of this address; see section 5.5.4
++of RFC 4862. When it expires, the address is no longer used for new
++outgoing connections. Defaults to
++.BR "forever" .
++
++.TP
++.B home
++(IPv6 only) designates this address the "home address" as defined in
++RFC 6275.
++
++.TP
++.B nodad
++(IPv6 only) do not perform Duplicate Address Detection (RFC 4862) when
++adding this address.
++
+ .SS ip address delete - delete protocol address
+ .B Arguments:
+ coincide with the arguments of
+@@ -145,7 +194,7 @@ If no arguments are given, the first address is deleted.
+ .SS ip address show - look at protocol addresses
+
+ .TP
+-.BI dev " NAME " (default)
++.BI dev " IFNAME " (default)
+ name of device.
+
+ .TP
+@@ -219,36 +268,53 @@ The difference is that it does not run when no arguments are given.
+
+ .PP
+ .B Warning:
+-This command (and other
++This command and other
+ .B flush
+-commands described below) is pretty dangerous. If you make a mistake,
+-it will not forgive it, but will cruelly purge all the addresses.
++commands are unforgiving. They will cruelly purge all the addresses.
+
+ .PP
+ With the
+ .B -statistics
+ option, the command becomes verbose. It prints out the number of deleted
+-addresses and the number of rounds made to flush the address list. If
+-this option is given twice,
++addresses and the number of rounds made to flush the address list.
++If this option is given twice,
+ .B ip address flush
+ also dumps all the deleted addresses in the format described in the
+ previous subsection.
+
+ .SH "EXAMPLES"
+ .PP
++ip address show
++.RS 4
++Shows IPv4 and IPv6 addresses assigned to all network interfaces. The 'show'
++subcommand can be omitted.
++.RE
++.PP
++ip address show up
++.RS 4
++Same as above except that only addresses assigned to active network interfaces
++are shown.
++.RE
++.PP
+ ip address show dev eth0
+ .RS 4
+-Shows the addresses assigned to network interface eth0
++Shows IPv4 and IPv6 addresses assigned to network interface eth0.
++.RE
++.PP
++ip address add 2001:0db8:85a3::0370:7334/64 dev eth1
++.RS 4
++Adds an IPv6 address to network interface eth1.
+ .RE
+ .PP
+-ip addr add 2001:0db8:85a3::0370:7334/64 dev eth1
++ip address delete 2001:0db8:85a3::0370:7334/64 dev eth1
+ .RS 4
+-Adds an IPv6 address to network interface eth1
++Delete the IPv6 address added above.
+ .RE
+ .PP
+-ip addr flush dev eth4
++ip address flush dev eth4 scope global
+ .RS 4
+-Removes all addresses from device eth4
++Removes all global IPv4 and IPv6 addresses from device eth4. Without 'scope
++global' it would remove all addresses including IPv6 link-local ones.
+ .RE
+
+ .SH SEE ALSO
+diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
+index 5ad372c..8ab50c1 100644
+--- a/man/man8/ip-link.8.in
++++ b/man/man8/ip-link.8.in
+@@ -255,6 +255,21 @@ specifies the number of receive queues for new device.
+ specifies the desired index of the new virtual device. The link creation fails, if the index is busy.
+
+ .TP
++VLAN Type Support
++For a link of type
++.I VLAN
++the following additional arguments are supported:
++
++.BI "ip link add " DEVICE
++.BI type " vlan " id " ID
++.BI link " DEVICE
++
++.in +8
++.sp
++.BI id " VNI "
++- specifies the VLAN Identifer to use. Note that numbers with a leading " 0 " or " 0x " are interpreted as octal or hexadeimal, respectively.
++
++.TP
+ VXLAN Type Support
+ For a link of type
+ .I VXLAN
+@@ -273,7 +288,9 @@ the following additional arguments are supported:
+ .R " ] [ "
+ .BI tos " TOS "
+ .R " ] [ "
+-.BI port " MIN MAX "
++.BI dstport " PORT "
++.R " ] [ "
++.BI srcport " MIN MAX "
+ .R " ] [ "
+ .I "[no]learning "
+ .R " ] [ "
+@@ -329,7 +346,11 @@ parameter.
+ - specifies the TOS value to use in outgoing packets.
+
+ .sp
+-.BI port " MIN MAX"
++.BI dstport " PORT"
++- specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
++
++.sp
++.BI srcport " MIN MAX"
+ - specifies the range of port numbers to use as UDP
+ source ports to communicate to the remote VXLAN tunnel endpoint.
+
+diff --git a/man/man8/ip-route.8.in b/man/man8/ip-route.8.in
+index d53cc76..7e68c52 100644
+--- a/man/man8/ip-route.8.in
++++ b/man/man8/ip-route.8.in
+@@ -16,7 +16,7 @@ ip-route \- routing table management
+
+ .ti -8
+ .BR "ip route" " { "
+-.BR list " | " flush " } "
++.BR show " | " flush " } "
+ .I SELECTOR
+
+ .ti -8
+diff --git a/man/man8/ip-rule.8 b/man/man8/ip-rule.8
+index dd925be..0c45a6f 100644
+--- a/man/man8/ip-rule.8
++++ b/man/man8/ip-rule.8
+@@ -108,8 +108,6 @@ The
+ .B local
+ table is a special routing table containing
+ high priority control routes for local and broadcast addresses.
+-.sp
+-Rule 0 is special. It cannot be deleted or overridden.
+
+ .TP
+ 2.
+diff --git a/man/man8/ip-tunnel.8 b/man/man8/ip-tunnel.8
+index c97c28c..1cc1105 100644
+--- a/man/man8/ip-tunnel.8
++++ b/man/man8/ip-tunnel.8
+@@ -50,7 +50,7 @@ ip-tunnel - tunnel configuration
+
+ .ti -8
+ .IR MODE " := "
+-.RB " { " ipip " | " gre " | " sit " | " isatap " | " ip6ip6 " | " ipip6 " | " ip6gre " | " any " }"
++.RB " { " ipip " | " gre " | " sit " | " isatap " | " vti " | " ip6ip6 " | " ipip6 " | " ip6gre " | " vti6 " | " any " }"
+
+ .ti -8
+ .IR ADDR " := { " IP_ADDRESS " |"
+@@ -107,10 +107,10 @@ select the tunnel device name.
+ set the tunnel mode. Available modes depend on the encapsulating address family.
+ .br
+ Modes for IPv4 encapsulation available:
+-.BR ipip ", " sit ", " isatap " and " gre "."
++.BR ipip ", " gre ", " sit ", " isatap " and " vti "."
+ .br
+ Modes for IPv6 encapsulation available:
+-.BR ip6ip6 ", " ipip6 ", " ip6gre ", and " any "."
++.BR ip6ip6 ", " ipip6 ", " ip6gre " and " vti6 "
+
+ .TP
+ .BI remote " ADDRESS"
+diff --git a/man/man8/ip.8 b/man/man8/ip.8
+index 4cd71de..24e257b 100644
+--- a/man/man8/ip.8
++++ b/man/man8/ip.8
+@@ -19,8 +19,8 @@ ip \- show / manipulate routing, devices, policy routing and tunnels
+
+ .ti -8
+ .IR OBJECT " := { "
+-.BR link " | " addr " | " addrlabel " | " route " | " rule " | " neigh " | "\
+- ntable " | " tunnel " | " tuntap " | " maddr " | " mroute " | " mrule " | "\
++.BR link " | " address " | " addrlabel " | " route " | " rule " | " neigh " | "\
++ ntable " | " tunnel " | " tuntap " | " maddress " | " mroute " | " mrule " | "\
+ monitor " | " xfrm " | " netns " | " l2tp " | " tcp_metrics " }"
+ .sp
+
+@@ -66,7 +66,7 @@ Output more detailed information.
+
+ .TP
+ .BR "\-l" , " \-loops " <COUNT>
+-Specify maximum number of loops the 'ip addr flush' logic
++Specify maximum number of loops the 'ip address flush' logic
+ will attempt before giving up. The default is 10.
+ Zero (0) means loop until all addresses are removed.
+
+diff --git a/man/man8/ss.8 b/man/man8/ss.8
+index b7fbaef..736d734 100644
+--- a/man/man8/ss.8
++++ b/man/man8/ss.8
+@@ -131,7 +131,7 @@ Read filter information from FILE.
+ Each line of FILE is interpreted like single command line option. If FILE is - stdin is used.
+ .TP
+ .B FILTER := [ state STATE-FILTER ] [ EXPRESSION ]
+-Please take a look at the official documentation (Debian package iproute-doc) for details regarding filters.
++Please take a look at the official documentation (package iproute\-doc) for details regarding filters.
+
+ .SH STATE-FILTER
+
+@@ -186,7 +186,7 @@ Find all local processes connected to X server.
+ List all the tcp sockets in state FIN-WAIT-1 for our apache to network 193.233.7/24 and look at their timers.
+ .SH SEE ALSO
+ .BR ip (8),
+-.BR /usr/share/doc/iproute-doc/ss.html " (package iproute�doc)",
++.BR /usr/share/doc/iproute-doc/ss.ps " (package iproute\-doc)",
+ .br
+ .BR RFC " 793 "
+ - https://tools.ietf.org/rfc/rfc793.txt (TCP states)
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-lnstat-interval.patch b/iproute2-3.19.0-lnstat-interval.patch
new file mode 100644
index 0000000..95697bf
--- /dev/null
+++ b/iproute2-3.19.0-lnstat-interval.patch
@@ -0,0 +1,54 @@
+From f016b9a352182df5856412c4e046d2a23424297f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:02 +0100
+Subject: [PATCH 7/7] lnstat: run indefinitely by default
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+See also:
+
+ * https://bugzilla.redhat.com/show_bug.cgi?id=977845
+
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ misc/lnstat.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/misc/lnstat.c b/misc/lnstat.c
+index e105b70..0385cbb 100644
+--- a/misc/lnstat.c
++++ b/misc/lnstat.c
+@@ -249,7 +249,7 @@ int main(int argc, char **argv)
+ MODE_JSON,
+ MODE_NORMAL,
+ } mode = MODE_NORMAL;
+- unsigned long count = 1;
++ unsigned long count = 0;
+ struct table_hdr *header;
+ static struct field_params fp;
+ int num_req_files = 0;
+@@ -362,7 +362,7 @@ int main(int argc, char **argv)
+ if (interval < 1 )
+ interval = 1;
+
+- for (i = 0; i < count; i++) {
++ for (i = 0; i < count || !count; ) {
+ lnstat_update(lnstat_files);
+ if (mode == MODE_JSON)
+ print_json(stdout, lnstat_files, &fp);
+@@ -373,8 +373,10 @@ int main(int argc, char **argv)
+ print_line(stdout, lnstat_files, &fp);
+ }
+ fflush(stdout);
+- if (i < count - 1)
++ if (i < count - 1 || !count)
+ sleep(interval);
++ if (count)
++ ++i;
+ }
+ break;
+ }
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-lnstat-stdout.patch b/iproute2-3.19.0-lnstat-stdout.patch
new file mode 100644
index 0000000..6e78dcd
--- /dev/null
+++ b/iproute2-3.19.0-lnstat-stdout.patch
@@ -0,0 +1,33 @@
+From 740b484db02f2398499e7953e08a50c4b708613b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:02 +0100
+Subject: [PATCH 6/7] lnstat: dump to stdout, not stderr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+See also:
+
+ * https://bugzilla.redhat.com/show_bug.cgi?id=736332
+
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ misc/lnstat.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/misc/lnstat.c b/misc/lnstat.c
+index 32b5cbe..e105b70 100644
+--- a/misc/lnstat.c
++++ b/misc/lnstat.c
+@@ -347,7 +347,7 @@ int main(int argc, char **argv)
+
+ switch (mode) {
+ case MODE_DUMP:
+- lnstat_dump(stderr, lnstat_files);
++ lnstat_dump(stdout, lnstat_files);
+ break;
+
+ case MODE_NORMAL:
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-proto-any.patch b/iproute2-3.19.0-proto-any.patch
new file mode 100644
index 0000000..7b0c827
--- /dev/null
+++ b/iproute2-3.19.0-proto-any.patch
@@ -0,0 +1,43 @@
+From ee80f98063d8265e754efcf11f43a7c0b25a1899 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:02 +0100
+Subject: [PATCH 3/7] ip-xfrm: support 'proto any' with 'sport' and 'dport'
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When creating an IPsec SA that sets 'proto any' (IPPROTO_IP) and
+specifies 'sport' and 'dport' at the same time in selector, the
+following error is issued:
+
+"sport" and "dport" are invalid with proto=ip
+
+However using IPPROTO_IP with ports is completely legal and necessary
+when one wants to share the SA on both TCP and UDP. One of the
+applications requiring sharing SAs is 3GPP IMS AKA authentication.
+
+See also:
+
+ * https://bugzilla.redhat.com/show_bug.cgi?id=497355
+
+Reported-By: Jiří Klimeš <jklimes at redhat.com>
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ ip/ipxfrm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/ip/ipxfrm.c b/ip/ipxfrm.c
+index 95f91a5..e685571 100644
+--- a/ip/ipxfrm.c
++++ b/ip/ipxfrm.c
+@@ -1339,6 +1339,7 @@ static int xfrm_selector_upspec_parse(struct xfrm_selector *sel,
+ case IPPROTO_UDP:
+ case IPPROTO_SCTP:
+ case IPPROTO_DCCP:
++ case IPPROTO_IP: /* to allow shared SA for different protocols */
+ break;
+ default:
+ fprintf(stderr, "\"sport\" and \"dport\" are invalid with PROTO value \"%s\"\n", strxf_proto(sel->proto));
+--
+2.0.5
+
diff --git a/iproute2-3.19.0-route-cloned.patch b/iproute2-3.19.0-route-cloned.patch
new file mode 100644
index 0000000..aa2669f
--- /dev/null
+++ b/iproute2-3.19.0-route-cloned.patch
@@ -0,0 +1,29 @@
+From db5da576c98906bf39cd914cec0c9226139db89f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Pavel=20=C5=A0imerda?= <psimerda at redhat.com>
+Date: Fri, 13 Mar 2015 13:17:02 +0100
+Subject: [PATCH 5/7] ip-route: don't hide routes with RTM_F_CLONED by default
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-Off-By: Pavel Šimerda <psimerda at redhat.com>
+---
+ ip/iproute.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/ip/iproute.c b/ip/iproute.c
+index 024d401..46c24bb 100644
+--- a/ip/iproute.c
++++ b/ip/iproute.c
+@@ -144,7 +144,7 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
+ if (r->rtm_family == AF_INET6 && table != RT_TABLE_MAIN)
+ ip6_multiple_tables = 1;
+
+- if (filter.cloned == !(r->rtm_flags&RTM_F_CLONED))
++ if (filter.cloned && !(r->rtm_flags&RTM_F_CLONED))
+ return 0;
+
+ if (r->rtm_family == AF_INET6 && !ip6_multiple_tables) {
+--
+2.0.5
+
diff --git a/iproute2-3.4.0-kernel.patch b/iproute2-3.4.0-kernel.patch
deleted file mode 100644
index 1e83729..0000000
--- a/iproute2-3.4.0-kernel.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff --git a/Makefile b/Makefile
-index c107955..1e15c72 100644
---- a/Makefile
-+++ b/Makefile
-@@ -7,6 +7,7 @@ DATADIR=$(PREFIX)/share
- DOCDIR=$(DATADIR)/doc/iproute2
- MANDIR=$(DATADIR)/man
- ARPDDIR=/var/lib/arpd
-+KERNEL_INCLUDE=/usr/include
-
- # Path to db_185.h include
- DBM_INCLUDE:=$(ROOTDIR)/usr/include
diff --git a/iproute2-3.9.0-IPPROTO_IP_for_SA.patch b/iproute2-3.9.0-IPPROTO_IP_for_SA.patch
deleted file mode 100644
index 6c150ec..0000000
--- a/iproute2-3.9.0-IPPROTO_IP_for_SA.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff --git a/ip/ipxfrm.c b/ip/ipxfrm.c
-index 0495ff4..b1d4c6e 100644
---- a/ip/ipxfrm.c
-+++ b/ip/ipxfrm.c
-@@ -1275,6 +1275,7 @@ static int xfrm_selector_upspec_parse(struct xfrm_selector *sel,
- case IPPROTO_UDP:
- case IPPROTO_SCTP:
- case IPPROTO_DCCP:
-+ case IPPROTO_IP: /* to allow shared SA for different protocols */
- break;
- default:
- fprintf(stderr, "\"sport\" and \"dport\" are invalid with PROTO value \"%s\"\n", strxf_proto(sel->proto));
diff --git a/iproute2-example-cbq-service.patch b/iproute2-example-cbq-service.patch
deleted file mode 100644
index f8b4978..0000000
--- a/iproute2-example-cbq-service.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff -up iproute2-20091106/examples/cbq.init-v0.7.3.fix iproute2-20091106/examples/cbq.init-v0.7.3
---- iproute2-20091106/examples/cbq.init-v0.7.3.fix 2009-11-10 19:41:44.000000000 +0100
-+++ iproute2-20091106/examples/cbq.init-v0.7.3 2009-11-27 13:36:07.957310549 +0100
-@@ -579,14 +579,14 @@ cbq_show () {
- ### Check configuration and load DEVICES, DEVFIELDS and CLASSLIST from $1
- cbq_init () {
- ### Get a list of configured classes
-- CLASSLIST=`find $1 \( -type f -or -type l \) -name 'cbq-*' \
-- -not -name '*~' -maxdepth 1 -printf "%f\n"| sort`
-+ CLASSLIST=`find $1 -maxdepth 1 \( -type f -or -type l \) -name 'cbq-*' \
-+ -not -name '*~' -printf "%f\n"| sort`
- [ -z "$CLASSLIST" ] &&
- cbq_failure "no configuration files found in $1!"
-
- ### Gather all DEVICE fields from $1/cbq-*
-- DEVFIELDS=`find $1 \( -type f -or -type l \) -name 'cbq-*' \
-- -not -name '*~' -maxdepth 1| xargs sed -n 's/#.*//; \
-+ DEVFIELDS=`find $1 -maxdepth 1 \( -type f -or -type l \) -name 'cbq-*' \
-+ -not -name '*~' | xargs sed -n 's/#.*//; \
- s/[[:space:]]//g; /^DEVICE=[^,]*,[^,]*\(,[^,]*\)\?/ \
- { s/.*=//; p; }'| sort -u`
- [ -z "$DEVFIELDS" ] &&
diff --git a/iproute2-tc-priority.patch b/iproute2-tc-priority.patch
deleted file mode 100644
index 2e328ad..0000000
--- a/iproute2-tc-priority.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-diff --git a/tc/f_u32.c b/tc/f_u32.c
-index 4f5f74e..290595c 100644
---- a/tc/f_u32.c
-+++ b/tc/f_u32.c
-@@ -403,6 +403,43 @@ static int parse_ip6_addr(int *argc_p, char ***argv_p,
- return res;
- }
-
-+static int parse_ip6_class(int *argc_p, char ***argv_p, struct tc_u32_sel *sel)
-+{
-+ int res = -1;
-+ int argc = *argc_p;
-+ char **argv = *argv_p;
-+ __u32 key;
-+ __u32 mask;
-+ int offmask = 0;
-+
-+ if (argc < 2)
-+ return -1;
-+
-+ if (get_u32(&key, *argv, 0))
-+ return -1;
-+ argc--; argv++;
-+
-+ if (get_u32(&mask, *argv, 16))
-+ return -1;
-+ argc--; argv++;
-+
-+ if (key > 0xFF || mask > 0xFF)
-+ return -1;
-+
-+ key <<= 20;
-+ mask <<= 20;
-+ key = htonl(key);
-+ mask = htonl(mask);
-+
-+ if (res = pack_key(sel, key, mask, 0, offmask) < 0)
-+ return -1;
-+ res = 0;
-+
-+ *argc_p = argc;
-+ *argv_p = argv;
-+ return res;
-+}
-+
- static int parse_ether_addr(int *argc_p, char ***argv_p,
- struct tc_u32_sel *sel, int off)
- {
-@@ -522,7 +559,7 @@ static int parse_ip6(int *argc_p, char ***argv_p, struct tc_u32_sel *sel)
- res = parse_ip6_addr(&argc, &argv, sel, 24);
- } else if (strcmp(*argv, "priority") == 0) {
- NEXT_ARG();
-- res = parse_u8(&argc, &argv, sel, 4, 0);
-+ res = parse_ip6_class(&argc, &argv, sel);
- } else if (strcmp(*argv, "protocol") == 0) {
- NEXT_ARG();
- res = parse_u8(&argc, &argv, sel, 6, 0);
diff --git a/man-pages.patch b/man-pages.patch
deleted file mode 100644
index 5e33543..0000000
--- a/man-pages.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-diff -up iproute2-2.6.29/man/man8/cbq.8.man iproute2-2.6.29/man/man8/cbq.8
---- iproute2-2.6.29/man/man8/cbq.8.man 2009-09-24 14:05:44.868922557 +0200
-+++ iproute2-2.6.29/man/man8/cbq.8 2009-09-24 14:05:24.760143753 +0200
-@@ -0,0 +1 @@
-+.so man8/tc-cbq.8
-\ No newline at end of file
-diff -up /dev/null iproute2-2.6.29/man/man8/ifcfg.8
---- /dev/null 2009-09-22 09:26:40.270218984 +0200
-+++ iproute2-2.6.29/man/man8/ifcfg.8 2009-09-24 14:03:05.415151874 +0200
-@@ -0,0 +1,57 @@
-+.TH IFCFG 8 "September 24 2009" "iproute2" "Linux"
-+.SH NAME
-+ifcfg \- simplistic script which replaces ifconfig IP managment
-+.SH SYNOPSIS
-+.ad l
-+.in +8
-+.ti -8
-+.B ifcfg
-+.RI "[ " DEVICE " [ " :ALIAS: " ] ] [ " command " ] " ADDRESS " [ " LENGTH " ] [ " PEER " ] "
-+.sp
-+
-+.SH DESCRIPTION
-+This manual page documents briefly the
-+.B ifcfg
-+command.
-+.PP
-+This is a simplistic script replacing one option of
-+.B ifconfig
-+, namely, IP address management. It not only adds
-+addresses, but also carries out Duplicate Address Detection RFC-DHCP,
-+sends unsolicited ARP to update the caches of other hosts sharing
-+the interface, adds some control routes and restarts Router Discovery
-+when it is necessary.
-+
-+I strongly recommend using it
-+.RI instead
-+of
-+.RI ifconfig
-+both on hosts and on routers.
-+
-+.SH IFCONFIG - COMMAND SYNTAX
-+
-+.SS
-+.TP
-+.B DEVICE
-+- it may have alias, suffix, separated by colon.
-+
-+.TP
-+.B command
-+- add, delete or stop.
-+
-+.TP
-+.B address
-+- optionally followed by prefix length.
-+
-+.TP
-+.B peer
-+- optional peer address for pointpoint interfaces.
-+
-+.SH EXAMPLE
-+.nf ifcfg eth0 193.233.7.90/24
-+.fi
-+This function determines, whether this is router or host.
-+It returns 0, if the host is apparently not router.
-+
-+.SH SEE ALSO
-+.BR ip-cref.dvi
-diff --git a/man/man8/ss.8 b/man/man8/ss.8
-index 2a4bbc5..f4b9282 100644
---- a/man/man8/ss.8
-+++ b/man/man8/ss.8
-@@ -128,7 +128,7 @@ Read filter information from FILE.
- Each line of FILE is interpreted like single command line option. If FILE is - stdin is used.
- .TP
- .B FILTER := [ state STATE-FILTER ] [ EXPRESSION ]
--Please take a look at the official documentation (Debian package iproute-doc) for details regarding filters.
-+Please take a look at the official documentation (package iproute\-doc) for details regarding filters.
-
- .SH STATE-FILTER
-
-@@ -150,7 +150,7 @@ Find all local processes connected to X server.
- List all the tcp sockets in state FIN-WAIT-1 for our apache to network 193.233.7/24 and look at their timers.
- .SH SEE ALSO
- .BR ip (8),
--.BR /usr/share/doc/iproute-doc/ss.html " (package iproute�doc)",
-+.BR /usr/share/doc/iproute-doc/ss.ps " (package iproute\-doc)",
- .br
- .BR RFC " 793 "
- - https://tools.ietf.org/rfc/rfc793.txt (TCP states)
--
cgit v0.10.2
http://pkgs.fedoraproject.org/cgit/iproute.git/commit/?h=master&id=cfb7669cf663dd641d93c80c675371504eb93659
More information about the scm-commits
mailing list