SCSI errors on cd burning
Alan
alan at clueserver.org
Tue Jan 6 07:50:29 UTC 2004
ide-scsi has been a real pain in the ass.
I am using the current Fedora kernel kernel-smp-2.4.22-1.2138.nptl built
for Athlon. I am using a dual athlon 2100+MP system with 512M and a
Pioneer A-05 DVD burner.
cdrecord-2.01-0.a19.2
When I try and use k3b to burn a bin/cue disc or DVD, I get errors.
Here is the output from cdrecord. Notice the SCSI errors. What is
weird is I get the same scsi errors if I am not using ide-scsi!
cdrecord
-----------------------
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code
version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c
1.75 02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include
DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-105 '
Revision : '1.21'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 1 MB
Track 02: data 803 MB
Total size: 804 MB (79:39.65) = 358474 sectors
Lout start: 804 MB (79:41/49) = 358474 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 1374
Starting to write CD/DVD at speed 16 in real SAO mode for single
session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum
pregapsize = 1.
/usr/bin/cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no
error
CDB: 5D 00 00 00 00 00 00 00 30 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.010s timeout 200s
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 6.569s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=16 -dao
driveropts=burnfree cuefile=/export2/home/alan/News/Pan/Movies/ww107.cue
-eject
Ideas?
--
"I say to you that the VCR is to the American film producer and the
American public as the Boston strangler is to the woman home alone."
- Jack Valenti in 1982 in testimony to the House of Representatives on
why the VCR should be illegal.
More information about the test
mailing list