HP USB 2.0 DVD+RW Drive Not Recognized?

[Thomas Cameron]

Howdy -

Using FC3 RC5 updated as of today.  I had to disconnect my external USB
2.0 HP DVD Writer in order to get FC3 installed, otherwise I got a fatal
oops at installation time.

Now that FC3 is installed, I am trying to use said DVD+RW drive.  When I
plug it in I see this:

Nov  5 14:10:29 thomas kernel: usb 1-1: new high speed USB device using
address 2
Nov  5 14:10:29 thomas kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Nov  5 14:10:29 thomas kernel:   Vendor: HP        Model: DVD Writer
200j   Rev: 1.13
Nov  5 14:10:29 thomas kernel:   Type:   CD-ROM
ANSI SCSI revision: 02
Nov  5 14:10:29 thomas scsi.agent[6618]: cdrom
at /devices/pci0000:00/0000:00:1e.0/0000:04:03.2/usb1/1-1/1-1:2.0/host3/3:0:0:0
Nov  5 14:10:29 thomas kernel: sr0: scsi3-mmc drive: 32x/32x writer
cd/rw xa/form2 cdda tray

However, usbview, grip and XCDroast do not see the drive.  It works
flawlessly in FC2.

I do see it in /proc/bus/usb/devices though:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=03f0 ProdID=0507 Rev= 3.10
S:  Manufacturer=Hewlett-Packard
S:  Product=USB Storage Adapter
S:  SerialNumber=0000000000035117
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-
storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=32ms

Am I missing something?  What do I need to do to use this drive?
-- 
A: Because people read from top to bottom.
Q: Why is top-posting bad?

Thomas Cameron, RHCE, CNE, MCSE, MCT