HP USB 2.0 DVD+RW Drive Not Recognized?

Kim Lux lux at diesel-research.com
Fri Nov 5 20:39:02 UTC 2004


what happens if you try to mount /dev/sr0 (manually) ?



On Fri, 2004-11-05 at 13:34 -0700, Kim Lux wrote:
> Do an lsusb.
> 
> It should have been recognized as a usb2 device.
> 
> 
> 
> On Fri, 2004-11-05 at 14:25 -0600, Thomas Cameron wrote:
> > Howdy -
> > 
> > Using FC3 RC5 updated as of today.  I had to disconnect my external USB
> > 2.0 HP DVD Writer in order to get FC3 installed, otherwise I got a fatal
> > oops at installation time.
> > 
> > Now that FC3 is installed, I am trying to use said DVD+RW drive.  When I
> > plug it in I see this:
> > 
> > Nov  5 14:10:29 thomas kernel: usb 1-1: new high speed USB device using
> > address 2
> > Nov  5 14:10:29 thomas kernel: scsi3 : SCSI emulation for USB Mass
> > Storage devices
> > Nov  5 14:10:29 thomas kernel:   Vendor: HP        Model: DVD Writer
> > 200j   Rev: 1.13
> > Nov  5 14:10:29 thomas kernel:   Type:   CD-ROM
> > ANSI SCSI revision: 02
> > Nov  5 14:10:29 thomas scsi.agent[6618]: cdrom
> > at /devices/pci0000:00/0000:00:1e.0/0000:04:03.2/usb1/1-1/1-1:2.0/host3/3:0:0:0
> > Nov  5 14:10:29 thomas kernel: sr0: scsi3-mmc drive: 32x/32x writer
> > cd/rw xa/form2 cdda tray
> > 
> > However, usbview, grip and XCDroast do not see the drive.  It works
> > flawlessly in FC2.
> > 
> > I do see it in /proc/bus/usb/devices though:
> > 
> > T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > P:  Vendor=03f0 ProdID=0507 Rev= 3.10
> > S:  Manufacturer=Hewlett-Packard
> > S:  Product=USB Storage Adapter
> > S:  SerialNumber=0000000000035117
> > C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
> > I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-
> > storage
> > E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
> > E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=32ms
> > 
> > Am I missing something?  What do I need to do to use this drive?
> > -- 
> > A: Because people read from top to bottom.
> > Q: Why is top-posting bad?
> > 
> > Thomas Cameron, RHCE, CNE, MCSE, MCT
> > 
> -- 
> Kim Lux (Mr.)  Diesel Research Inc
> 
-- 
Kim Lux (Mr.)  Diesel Research Inc




More information about the test mailing list