New FC3 Kernel causes panic

[Dave Jones]

On Wed, Nov 17, 2004 at 04:27:38PM -0500, Will Backman wrote:
 > On Wed, 2004-11-17 at 13:09 -0800, Sean Bruno wrote:
 > > >  > > > > Cannot find logical volumes.
 > > >  > > > > Dell Optiplex GX280 SATA, dual boot with WinXP.
 > > >  > > > 
 > > 
 > > >  > > 00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA
 > > >  > > Controller (rev 03)
 > > 
 > > >  > > 
 > > >  > > 
 > > >  > Having the same issue with a Dell Optiplex GX270(SATA as well):
 > > >  > 
 > > >  > 00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) SATA Controller (rev
 > > >  > 02)
 > > 
 > > Here is the Boot Screen that is displayed when the "Kernel Panic"
 > > appears:
 > > 
 > > Booting 'Fedora Core (2.6.9-1.678_FC3smp)'
 > > 
 > > root (hd0,0)
 > > 	Filesystem type is ext2fs, partition type 0x83
 > > Kernel /vmlinuz-2.6.9-1.678_FC3smp ro root=/dev/VolGroup00/LogVol00 rhgb
 > > quiet
 > > 	[Linux-bzImage, setup=0x1400, size=0x14f880]
 > > initrd /initrd-2.6.9-1.678_FC3smp.img
 > > 	[Linux-initrd @ 0x1fe60000, 0xffe5fd bytes]
 > > 
 > > 
 > > Uncompressing Linux... Ok, booting the kernel
 > > audit(1100724706.921:0): inititalized
 > > Red Hat nash version 4.1.18 starting
 > > 	Reading all physical volumes, this may take a while...
 > > 	No volume groups found
 > > 	No volume groups found
 > > 	No volume groups found
 > > mount:  error 6 mounting ext3
 > > mount:  error 2 mounting none
 > > switchroot:  mount failed:  22
 > > umount /initrd/dev failed: 2
 > > Kernel panic - not syncing:
 > > Attempted to kill init!
 > > 
 > That is what I get on the GX280.

https://bugzilla.redhat.com/beta2/show_bug.cgi?id=139674

(Note, its 'fc2', though the same bug is in fc3, and it
 makes sense to keep all the comments in the same place,
 so feel free to make fc3 related comments in that bug too)

		Dave