WEP Configuration wonky in T2?

[Jon Savage]

On Tue, 21 Sep 2004 17:38:02 -0400 (EDT), Dan Williams <dcbw at redhat.com> wrote:
> Hi,
> 
> I also have issues, for example, my Cisco 350 card will _not_ connect to
> my Linksys WRT54G when WEP is enabled, but the same card will do just fine
> to that base station under Windows98 and 2000.
> 
> One thing you might try is to change the authentication mode.
> 
> iwconfig eth1 key open
> OR
> iwconfig eth1 key restricted
> 
> Techically, "open" is Open System Authentication, and "restricted" is
> Shared Key Authentication, which ahve to be set on your access point.  But
> try both modes just for kicks.
> 
> Dan
> 
Thanks, Dan I'll try that later tonight. I did not see anything in
bugzilla as of this afternoon, should it be added?

Bests

Jon