kernel-2.6.8-1.584 - smp vs. single - and errors and errors
M.Clasen
webmaster at hg-carstyling.de
Thu Sep 23 13:39:50 UTC 2004
im using smp machine, 2xP3 1000mhz in a D6VAA Mainboard.
i got some errors with the 584 smp-kernel (no usbmouse, no eth0, no smb)
the use of the 584 standart (single cpu) kernel make no errors here, but
uses only one cpu. ok, its not an smp-kernel, but im wondering, because
the normal kernel boots up normal and the same smp-kernel fails ?!
since some days the normal way to get and build a kernel from kernel.org
seems to be changed - ok, i have to read a lot more about it, but a
normal smp-build of the 2.6.8.1 from kernel.org doesnt boot and has the
same problems as the 584 kernel what i tryed to boot here.
i read alreday about the missing initial shell, ya i got the same issues
and fixed it with a initrd and it was ok, but why ?!
maybe i should not use a fc3t2 in a day-by-day work, its a fight, but
all probs i got in the past were fixable, but the smp-problem here is
really present. i cannot fix it, coz i do not know why the standart
2.6.8.1 wont run correctly
next problem, is the missing kernel-devel.
i use nvidia and vmware, what both needs a tree of the current kernel.
i cannot boot the normal 2.6.8.1 nor the current 2.6.8-1.584, compiled
or static.
i was every time able to build and boot a normal kernel from kernel.org
for all my machines, i got never such errors in the past with rh or fc.
what informations do i have to provide to you out there ?! my dmesg ? my
bootlog ?
i`m in the need of help and im wide open for your requests.
regards from a rainy germany
Michael
--
Webmaster, Systemtechnik/Administration
E-Mail: webmaster at hg-carstyling.de
On Web: www.hg-carstyling.de
Fackenburger Allee 55a
23554 Lübeck / Germany
Tel.: +49(0)451-4505952
Fax.: +49(0)451-4505954
More information about the test
mailing list