Pronlem with Intel 82810e DC-133 CC Video Controller

[Chandana De Silva]

Sorry I could not reply earlier. I set the resolution to 1024x768 at 16 and
the hit ok, when the screen went blank. I am attaching xorg.conf for
your information.

On Sat, 2005-05-14 at 17:58 -0400, Jim Cornette wrote:
> Chandana De Silva wrote:
> > I installed FC4 test 3.92 on my computer which has the ntel 82810e
> > DC-133 CC Video Controller.
> > 
> > The install went fine, but the screen went blank after specifying the
> > screen resolution. I think this is when the X server is started for the
> > first time.
> > 
> > The solution was to boot off the rescue cd, and
> > change /etc/X11/xorg.conf and add Option "noaccel" to the 
> > Section "Device"
> >         Identifier  "Videocard0"
> >         Driver      "i810"
> >         VendorName  "Videocard vendor"
> >         BoardName   "Intel 810"
> >         Option      "noaccel"
> > EndSection
> > 
> > I think this bug has been around for some time.
> > See :https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=132267
> > 
> > Chandana
> > 
> 
> The blanking problem is different than the refresh problem described in 
> the bug report that you referenced.
> 
> I have an Intel 815 (uses the i810 driver also) that works great except 
> for a blue border prior to 3.92 and its version of X.
> I don't add the noaccel option and have no problem in resolutions higher 
> than what is supported by DRI (1280x1024 at 24) and no problem with 
> (1024x768 at 16). This is the version shortly before FC4T3 was released.
> 
> Whatare you trying to set your resolution to when the blanking was 
> encountered? (Depth/resolution?)
> 
> I'm downloading the iso files for FC4T3 right now and would like to see 
> if I can confirm your problem description.
> 
> Jim
> 
-------------- next part --------------

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Samsung SyncMaster 17GLi"
	DisplaySize  310	230
	HorizSync    30.0 - 65.0
	VertRefresh  50.0 - 120.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "i810"
	VendorName  "Videocard vendor"
	BoardName   "Intel 810"
	Option 	    "noaccel"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection