Sound with TV Time and Happauge 250
Pete Graner
pgraner at redhat.com
Wed Jul 5 14:36:55 UTC 2006
Paul wrote:
> Hi,
>
> I have my analogue satellite hooked up to my Hauppauge TV card (lspci
> identifies it as a Brooktree Bt878 Video and Audio Cap card).
>
> The problem is, I'm getting no sound from it.
>
> Looking at lsmod, nothing seems to be connected to the sound modules for
> bttv (the output is below).
>
I have the same card and you have to run a cable from the line out on
the TV card to the AUX or MIC on your sound card. (Normal 2.5mm stereo
male end cable) The TV card itself doesn't have a sound driver. IIRC the
card came with a 6" jumper cable for that purpose.
Pete
> What do I need to do to attach the audio to the sound modules for my
> Audigy sound card?
>
> TTFN
>
> Paul
>
> /sbin/lsmod
>
> Module Size Used by
> loop 50192 0
> autofs4 58888 2
> hidp 84352 2
> rfcomm 109216 0
> l2cap 92160 10 hidp,rfcomm
> bluetooth 121988 5 hidp,rfcomm,l2cap
> video 53000 0
> button 41120 0
> battery 44168 0
> asus_acpi 50212 0
> acpi_memhotplug 38912 0
> ac 38920 0
> ipv6 424160 26
> parport_pc 64680 1
> lp 48592 0
> parport 77580 2 parport_pc,lp
> usblp 49152 0
> ov511 111504 0
> snd_emu10k1_synth 41472 0
> snd_emux_synth 73472 1 snd_emu10k1_synth
> snd_seq_virmidi 41984 1 snd_emux_synth
> snd_seq_midi_emul 40192 1 snd_emux_synth
> floppy 101832 0
> snd_emu10k1 166048 3 snd_emu10k1_synth
> sg 71848 0
> snd_rawmidi 63360 2 snd_seq_virmidi,snd_emu10k1
> snd_ac97_codec 143704 1 snd_emu10k1
> snd_ac97_bus 36096 1 snd_ac97_codec
> usb_storage 110816 0
> snd_seq_dummy 37508 0
> snd_seq_oss 70400 0
> snd_seq_midi_event 41984 2 snd_seq_virmidi,snd_seq_oss
> snd_seq 98208 8
> snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> tuner 97592 0
> pcspkr 36736 0
> msp3400 65056 0
> bttv 254452 0
> video_buf 62340 1 bttv
> snd_pcm_oss 82080 0
> snd_mixer_oss 52224 1 snd_pcm_oss
> snd_pcm 126472 4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
> ir_common 63620 1 bttv
> compat_ioctl32 41856 2 ov511,bttv
> i2c_algo_bit 42632 1 bttv
> btcx_risc 38408 1 bttv
> snd_seq_device 43284 7
> snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
> snd_timer 61704 3 snd_emu10k1,snd_seq,snd_pcm
> snd_page_alloc 44304 2 snd_emu10k1,snd_pcm
> snd_util_mem 39296 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 44936 2 snd_emux_synth,snd_emu10k1
> tveeprom 50320 1 bttv
> videodev 59008 2 ov511,bttv
> snd 103592 16
> snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
> soundcore 44960 1 snd
> ohci_hcd 56860 0
> v4l1_compat 44932 1 videodev
> v4l2_common 57984 5
> tuner,msp3400,bttv,compat_ioctl32,videodev
> emu10k1_gp 37632 0
> gameport 51728 2 emu10k1_gp
> ohci1394 71000 0
> ide_cd 76576 0
> ehci_hcd 69900 0
> ieee1394 403480 1 ohci1394
> i2c_nforce2 41856 0
> i2c_core 59008 6
> tuner,msp3400,bttv,i2c_algo_bit,tveeprom,i2c_nforce2
> skge 75920 0
> cdrom 70696 1 ide_cd
> dm_snapshot 51792 0
> dm_zero 35328 0
> dm_mirror 57728 0
> dm_mod 102480 8 dm_snapshot,dm_zero,dm_mirror
> ext3 177424 7
> jbd 99496 1 ext3
> sata_nv 46468 0
> libata 139688 1 sata_nv
> aic7xxx 170168 0
> scsi_transport_spi 62464 1 aic7xxx
> sd_mod 55168 0
> scsi_mod 191952 6
> sg,usb_storage,libata,aic7xxx,scsi_transport_spi,sd_mod
>
> /sbin/lspci
>
> 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev
> a1)
> 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
> 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management
> (rev a1)
> 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
> 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
> 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
> Controller (rev a2)
> 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
> (v2.5) (rev a2)
> 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
> Bridge (rev a2)
> 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
> (rev a2)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
> 440 AGP 8x] (rev a4)
> 02:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
> 02:07.1 Input device controller: Creative Labs SB Audigy MIDI/Game port
> (rev 03)
> 02:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
> 02:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
> 02:09.0 Mass storage controller: Triones Technologies, Inc.
> HPT366/368/370/370A/372/372N (rev 04)
> 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11)
> 02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> Gigabit Ethernet Controller (rev 13)
> 02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
> IEEE-1394a-2000 Controller (PHY/Link)
>
>
--
Pete Graner email: <pgraner at redhat.com>
More information about the test
mailing list