iostat missing data

[Kenny Simpson]

Hey, today I noticed that iostat is no longer extended info:

> iostat -x
Linux 2.6.18-1.2798.fc6 (ac)    10/31/2006

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          47.03    0.00    6.88   15.82    0.00   30.26

Device:         rrqm/s   wrqm/s   r/s   w/s   rsec/s   wsec/s avgrq-sz avgqu-sz   await  svctm 
%util

Basic info still works:
> iostat
Linux 2.6.18-1.2798.fc6 (ac)    10/31/2006

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          34.76    0.00    4.76    9.68    0.00   50.80

Device:            tps   Blk_read/s   Blk_wrtn/s   Blk_read   Blk_wrtn
hda              23.54       537.16       149.17     399903     111055
hdd               1.02        76.79         0.40      57165        296



System info - all updates for rawhide as of today, excluding libcurl stuff.
Olde pentium III 450, ide drives.

from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive
hdd: ST5850A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2
hdd: max request size: 128KiB
hdd: 1669260 sectors (854 MB) w/256KiB Cache, CHS=1656/16/63, DMA
 hdd: hdd1 hdd2

-Kenny



 
____________________________________________________________________________________
Everyone is raving about the all-new Yahoo! Mail 
(http://advision.webevents.yahoo.com/mailbeta/)